DOCSLIB.ORG

L! 00045 Li~Lllllf 9597L~~L~I

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
L! 00045 Li~Lllllf 9597L~~L~I LEGISLATIVE REFERENCE LIBRARY 1 f lilliill b !li1i~ll~~3 0307 ~l~lll! 00045 li~lllllf 9597l~~l~i POSSIBLE ENVIRON ENTAL I PA CT OF _BASE ET AL ININ6 IN INNESOTA MINNESOTA DEPARTMENT OF NATURAL RESOURCES DIVISION OF WATERS, SOILS & MINERALS JUNE 1972 This document is made available electronically by the Minnesota Legislative Reference Library as part of an ongoing digital archiving project. http://www.leg.state.mn.us/lrl/lrl.asp (Funding for document digitization was provided, in part, by a grant from the Minnesota Historical & Cultural Heritage Program.) STATE OF MINNESOTA DEPARTMENT OF NATURAL RESOURCES DIVISION OF WATERS, SOILS AND MINERALS POSSIBLE ENVIRONMENTAL IMPACT OF BASE METAL MINING IN MINNESOTA By William C. Brice 345 Centennial Office Building St. Paul, Minnesota 55155 TABLE OF CONTENTS Page SCOPE AND PURPOSE 1 BASE METAL MINING IN MINNESOTA 1 Markets Mining Methods Beneficiation 4 Metal Extraction 6 Refining 7 AIR POLLUTION PROBLEMS ASSOCIATED WITH PYROMETALLURGICAL EXTRACTION 7 ALTERNATIVE EXTRACTION METHODS 10 Pyrometallurgical Methods 10 Hydrometallurgical Methods 10 Combination Methods 10 Comparison of Extraction Methods for Use in Minnesota 10 APPENDIX I: FUTURE MARKETS FOR COPPER-NICKEL RESOURCES 11 APPENDIX II: UNDERGROUND MINING METHODS 13 APPENDIX Ill: BENEFICIATION OF SULFIDE ORES 13 APPENDIX IV: ASSUMPTIONS USED IN THE VARIOUS CALCULATIONS 14 APPENDIX V: PYROMETALLURGICAL EXTRACTION - TRADITIONAL METHOD 15 APPENDIX VI: HYDROMETALLURGICAL EXTRACTION - LEACHING METHOD 17 APPENDIX VII: REFINING 21 APPENDIX VIII: DUST RECOVERY 21 APPENDIX IX: EFFECTS OF S02 IN THE ATMOSPHERE 21 APPENDIX X: AIR POLLUTION POTENTIAL 22 APPENDIX XI: WIND STATISTICS FOR NORTHEASTERN MINNESOTA 23 APPENDIX XII: THE TALL STACK APPROACH 26 APPENDIX XIII: SULFUR RECOVERY SYSTEMS 42 APPEND1X XIV: CURTAILED PRODUCTION 44 APPENDIX XV: PYROMETALLURGICAL EXTRACTION - Al TERNATE METHODS 44 I APPENDIX XVI: HYDROMETALLURGICAL EXTRACTION - RESEARCH 46 APPENDIX XVII: HYDROMETALLURGICAL EFFECTS AND CONTROL 52 APPENDIX XVIII: COMBINATION PYROMETALLURGICAL - HYDROMETALLURGICAL EXTRACTION RESEARCH 52 APPENDIX XIX: A CAPSULE VIEW OF U.S. COPPER SMELTING CAPABILITY 53 APPENDIX XX: CALCULATIONS OF NECESSARY RESERVES FOR THE VARIOUS EXTRACTION METHODS 55 APPENDIX XXI: CALCULATIONS OF SULFUR RECOVERY COSTS WITH THE VARIOUS EXTRACTION PROCESSES 56 APPENDIX XXll: A REVIEW OF SEVERAL MINING COMPANIES' POLLUTION CONTROL PROGRAMS 57 FIGURES AND TABLES Figure No. Page 1 Minnesota Greenstone and Gabbro Formations 2 2 Greenstone Belts of Canada and the United States 3 3 Lands Included in the Shipstead-Newton-Nolan Act 5 4 Surface Wind Roses for Northeastern Minnesota 9 5 Cutaway View of a Fluid Bed Roaster 16 6 Cutaway View of I NCO Reverberatory Furnace 18 7 Cutaway View of a Horizontal Side-blown Converter 19 8 High Pressure System and Temperature Inversion Graph 24 9 Forecast of Yearly Air Pollution Potential Episodes 25 10 Location Map for Surface Wind Roses 27 11 Key to Wind Rose Data Sheets 28 12 Influence of Vertical Temperature Variations on Stack Effluents 41 13 Generalized Citrate Process Flowsheet 43 14 Noranda Continuous Smelting Furnace 45 15 WORCRA Continuous Furnace 45 16 Cutaway View of INCO Oxygen Flash Smelting Furnace 47 17 Cutaway View of Outokumpu Flash Smelting Furnace 48 18 Cutaway View of a Blast Furnace for Sulfide Nickel Ore 49 19 Cutaway View of a Submerged Arc Electric Furnace .50 Table No. 1 Estimate of Water Requirements and Waste Products 7 2 Summary of Possible Extraction Methods and Estimate of Environmental Costs 12 3 Upper Wind Statistics for Northeastern Minnesota 26 SCOPE AND PURPOSE to review the production and recovery methods that might conceivably be used and some of the environmental and Minnesota is on the threshold of a new mining industry; production problems that could be associated with these that of copper, nickel, and other associated metals. Such processes. an industry could have a substantial impact on the economy and on the natural environment of the state depending upon the mining and processing methods utilized, and the Markets individual circumstances associated with a specific operation. Markets, although not dfrectly associated with the The .purpose of this report is to review and summarize environmental aspects of base metal mining, are important available information on the mining and processing of base because of the by-product sulfur that must be produced, metals, such as copper and nickel, in order to provide a and the fact that the total production costs of the metals guide for planning and evaluating the impact of future will have to include the recovery and sale or storage of a mining operations in Minnesota. The report emphasizes major portion of the contained sulfur. Appendix I contains advantages, disadvantages, and possible utilization of particu­ a brief review of the market outlook for copper, nickel and lar systems, and contains information on probable major sulfur. For copper, economists predict a surplus throughout environmental factors to be considered in base metal most of the seventies, and early eighties. Prices, however, operations. Background information is included in the are not expected to drop below forty-five cents per pound appendices and a bibliography is provided to assist those of copper. Expanding niclffi markets have caused a nickel wishing to study the subject further. shortage throughout most of the sixties. However, additional This report was prepared through the cooperation and productio~ capacity coupled with a slowdown in economic assistance of the United States Bureau of Mines, State Land growth rates of consuming nations has recently caused an and Forestry Offices, Superior National Forest Office and oversupply of nickel on the World market. If all of the planned United States Department of Commerce, National Weather production capacity goes on line, then the oversupply will Service Forecast Office. probably continue throughout most of the seventies. Because of the many new sources of ~lfur, this market BASE METAL MINING IN MINNESOTA appears to be in for a long period of surplus. In Minnesota, The primary potential for base metal mining in the demand for elemental sulfur and sulfuric acid is limited. Minnesota exists in the Duluth Gabbro Complex, which lies If little or no local market is found for sulfuric acid, and it north of Duluth in the "Arrowhead Country", and the appears this will be the case, then the contained sulfur Greenstone formations which cover substantial portions of would have to be recovered in a storable form, either Northern Minnesota. A geologic map showing the generalized as elemental sulfur or gypsum. location of these two formations is contained in Figure 1. In view of the concerted effort presently being made in Mining Methods Minnesota and the productivity of similar explored forma­ tions just to the north in Canada, base metal mining in Base metal mining will be substantially different than Minnesota would appear to be only a matter of time. Based the present iron ore mining we are familiar with in Northern on exploration to date, the United States Bureau of Mines Minnesota. Although portions of some ore bodies might lists the Duluth Gabbro Complex, which contains copper be amenable 1 to open pit mining, the majority would and nickel, as the largest known nickel sulfide resource probably be mined by underground methods due to the in the United Statesl. In addition, considerable exploration characteristics of the formations. Deposits in the Greenstone is being conducted in the Greenstone belts of Minnesota formation may dictate rather small underground operations, for mineral deposits containing such metals as copper, whereas deposits in the Duluth Gabbro formation may zinc, lead, gold and silver. This formation is a major support larger scale underground mines and possibly some source of Canada's mineral wealth, as shown in Figure· 2. open pit mines. Any open pit mines would be limited to In order to study the environmental aspects of future the areas adjacent to the base of the Gabbro formation where sulfide mining in Minnesota, and in particular the metal the formation is rather shallow in depth and the stripping extraction phase of such an operation, it is necessary ratio small. I I I i f-!-~~------j ! i -·-·-·-·-' I ST. LOUIS i I ~I r-·-------· I ) ~ ~ . · -~I~ ts> I i, ·v'~ I b.~Q!! ____ _ ~CASS .1 I I .... :·::.:~.1::-: ...:.-- .. ·.:~·-:·.-:::·-:·:·~--~·.:-· ~ r---~ L_____ 1. ·.·:.: ... i~~·ir~ .-:;_:-::..-·: F / \CP.OW WING 1 1Al~N 1 IRON FORMATION : ~ .. ~_ .....;;.:~~.!,_-~·;: ·-·---, i ti -·--·-·-1 1-·-·-1 .. I i · · L I I 1 1GRANT ,·.0"G •. 1,.,0.. 11·MOP.P.l~r:!.._ ____ __1 1- r GREENSTONE BELTS -·--·----.L"----·-·-·--·-·~. I /KANABEC IPIN"E 1 I I ' I ·-·-·----- T_~Y.£8.~ __ I I i { .,MILLE I 1, i l 1 \~.!!!."I2...~--~~.L - . l DULUTH GABBRO COMPLEX l22.~~~--1~PE /STEARNS \}-. jrsANTI i BIG / -----i-·-·--- J s~_RsuP.NE ---·-·-. 1 s T.~.E 1. I 1-·---i-r~· '-.--..."\i1 F~~-0 1 '""' '-f~L-._·-·-1 1 I .f".r' "·".ANOKA i DIABASIC GABBRO AND \. j ., ·-·-·1~ . I. I I~ ,_ RELATED ROCKS '-\_ I IMEEKEJL __ 1~~.!.§Ji.L_I '-t~ I~ __).~_HIPP~~h~~H_!.__l_ __ I l l!!i~~PIN \5-- j~ ~-~.lL'Y.~_u_J \,_ I I I 1-.----. / 1i ~- __,M<LE<?L_l~_RVER (° ( ,__,.... n.'=-l.QE MfQ_!_c,_uu:_ I''"' I I I 1-· ./ I I I i ·'-...RENVILLE I -·-· ,.,;;·..J.r -1 I · ,--- '"""'-."--.. j~·Q.!·~----jOAKOTA_J- . J"\,._lill.uL. ____ -<. I ·---r 1. I "'-.NICOLLET / I I I I 1· ............ ,_ ~ . I . 1· ,--·-· \ "i'.e suEuR ! I · ~~-~.!:.2'._92!._I ____ ~~~~~~- f'·---.. j-=·-1 /RICE 'GOODHUE lwABASHA ·-· I I /eAowN . .,_....:, -:-·-·-·-·-·-·-·-·-·--·-[ I ! I ·---,-·-·-·-1 I I I I ---·, I ! I I0 I i i I I ~.!f..~.~I.O.!!tlr-l!BB.~.---'f2l!~~QQ_j~_TONWAN /8LUE EARTH iwASECA ]'STEELE ioooGE ioLMS!fP. ___b'!.2.~---·-· ' 1 1 ----- -,-------·-r·----·-r-·---.~--r 1 I I I I i i i ! I I i i i I I I ROCK NOBLES JACKSON MARTIN FARIBAULT FREEBORN MOWER FILLMORE HOUSTON Figure 1 Minnesota Greenstone & Gabbro Formations 2 C> ~··,·.:····•• @: ~ ~ / .
Load more

Recommended publications
  • Back Ground of Gold Leaching Reagent ---Florrea Goldix
    SHENYANG FLORREA CHEMICALS CO., LTD 1719, BLD B,Hai‐li‐de Mansion,NO.135,ChangJiang Street, Huanggu District, Shenyang, Liaoning Province, P. R . China Tel: 0086 24 31515191 Mobile: 0086 136 0982 1616 Fax: 0086 24 31513277 Skype: yang(florrea) ISO 9001 Certified NO. : 086911Q E‐mail: [email protected] www.florrea.com MSN: [email protected] ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ BACK GROUND OF GOLD LEACHING REAGENT -----FLORREA GOLDIX 567 (Excellent Cyanide Replacement , Environmentally friendly) Florrea Gold Lixiviant GOLDIX 567‐‐‐ Environmentally friendly Gold Leaching without cyanide. The various oxidized gold ore were leached with various lixiviants and Florrea Goldix 567 is the best lixiviant substitute for cyanide as gold lixiviant at present, meanwhile gole leaching speeds with organic chlorine C was 8 times of that with cyanide Gold cyanidation, also called cyanide leaching, is a metallurgical technique for extracting gold from low‐grade ore by converting the gold to a water soluble coordination complex. It is the most commonly used process for gold extraction. Due to the highly poisonous nature of cyanide, the process is controversial and its usage is banned in a number of countries and territories. It uses cyanide to dissolve the gold within the rock, which, itself, is not soluble in cyanide. The gold is then drawn out in a liquid form that can be treated to remove the cyanide. Almost 90% of all gold extracted commercially is done so by cyanidation. The process has been controversial since its inception due to the poisonous nature of cyanide and the threat it poses to the environment and the people working in the extraction facilities.
    [Show full text]
  • Background for Nepa Reviewers: Non-Coal Mining Operations
    EPA/530//R-95/043 NTIS/PB96/109/103 TECHNICAL DOCUMENT BACKGROUND FOR NEPA REVIEWERS: NON-COAL MINING OPERATIONS December 1994 U.S. Environmental Protection Agency Office of Solid Waste Special Waste Branch 401 M Street, SW Washington, DC 20460 Disclaimer and Acknowledgements This document was prepared by the U.S. Environmental Protection Agency (EPA). The mention of company or product names is not to be considered an endorsement by the U.S. Government or by the EPA. This Technical Document consists of nine sections. The first is EPA's overview of mining and the statutory and regulatory background. That is followed by a description of mining activities and their potential environmental impacts. The remaining sections cover specific environmental concerns, environmental monitoring, and pollution prevention. Also provided are a list of contacts, glossary, and references. This report was distributed for review to the U.S. Department of the Interior's Bureau of Mines, Bureau of Land Management, and National Park Service; the U.S. Department of Agriculture's Forest Service; Western Governors Association; and other industry and public interest groups. The use of the terms "extraction," "beneficiation," and "mineral processing" is not intended to classify any waste stream for the purposes of regulatory interpretation or application. Rather, these terms are used in the context of common industry terminology. Background for NEPA Reviewers TABLE OF CONTENTS Page INTRODUCTION ..................................................................1-1
    [Show full text]
  • Addressing the Information Gaps on Prices of Minerals Sold in an Intermediate Form
    The Platform for Cooperation on Tax DISCUSSION DRAFT: Addressing the Information Gaps on Prices of Minerals Sold in an Intermediate Form Feedback Period 24 January 2017 – 21 February 2017 Organisation for Economic Co-operation and Development (OECD) World Bank Group (WBG) International Monetary Fund (IMF) United Nations (UN) 1 This discussion draft has been prepared in the framework of the Platform for Collaboration on Tax by the OECD, under the responsibility of the Secretariats and Staff of the four mandated organisations. The draft reflects a broad consensus among these staff, but should not be regarded as the officially endorsed views of those organisations or of their member countries. 1 Table of Contents Introduction................................................................................................................................................................ 6 Domestic Resource Mobilisation from Mining......................................................................................... 6 Report Structure ................................................................................................................................................... 9 Building An Understanding of the Mining Sector – A Methodology ................................................ 10 Introduction ........................................................................................................................................................ 10 Steps in the Methodology ...........................................................................................................................
    [Show full text]
  • Biooxidation of a Gold Bearing Arsenopyrite/Pyrite Cencentrate
    .... r BIOOXIDATION OF A GOLD BEARING ARSENOPYRITE/PYRITE CONCENTRATE by D.M. MILLER B. Sc. Eng (UNIVERSITY OF THE WI1WATERSRAND).1984 University of Cape Town Submitted to the University of Cape Town in fulfilment of the requirements for the degree of Masters of Science in Engineering February 1990 The University of Cape Town has been given the right to reproduce this ti.esi3 in whole or In part. Copyright is he!(! Ly the author. The copyright of this thesis vests in the author. No quotation from it or information derived from it is to be published without full acknowledgement of the source. The thesis is to be used for private study or non- commercial research purposes only. Published by the University of Cape Town (UCT) in terms of the non-exclusive license granted to UCT by the author. University of Cape Town i ABSTRACT Biooxidation of gold bearing refractory sulphide concentrates is emerging as a viable alternative to roasting and pressure oxidation as the procedure where by gold liberation is achieved. Agitated, aerated bioreactors are required for rapid oxidation; hence the need for the development of a kinetic model where by results obtained by batch and small scale testwork are interpreted and the performance of biooxidation reactors can be predicted and which facilitates reactor design and scale-up Many models have been proposed to describe biooxidation, predicting either bacterial growth in the system, or the rate of sulphide mineral oxidation. Of these, only one, incorporating the empirical logistic equation to describe the rate of sulphide oxidation, (Pinches et al., 1987), was found to include rate parameters useful for design and scale-up purposes.
    [Show full text]
  • Principles of Extractive Metallurgy
    Principles of Extractive Metallurgy by Professor Nosa O. Egiebor Environmental Engineering Program Department of Chemical Engineering Tuskegee University Tuskegee, AL 36088 USA Course Reference Texts Materials for the course were taken from multiple textbook. The main texts include: Principles of Extractive Metallurgy by Terkel Rosenquist; Tapir Academic Press, Trondheim, Norway, 2004. The Chemistry of Gold Extraction (2nd Ed) by John O. Marsden and C. Lain House, SME Littleton, Colorado, USA (2006) Process Selection in Extractive Metallurgy by Peter Hayes, Hayes Publishing Co., Brisbane, Australia (1985) Instructor’s Lecture Notes, Prof. Nosa O. Egiebor (2011) Introduction - Definitions Metallurgy is the science of extracting and refining metals from ores and the compounding of metals to form alloys. Extractive metallurgy is the branch of metallurgical science & engineering which deals with the extraction and refining of metals from ores. An ore is a rock that contains commercially viable amounts of metallic/non-metallic solid minerals. Ores are complex associations of mineral grains A mineral is a chemical compound that constitute a component of an ore, and with its own characteristic chemical composition. Introduction – Types of Ores & Minerals Most metals are combined with other elements to form minerals. Few exist as pure metals. The table below provides examples of the common types of ores with minerals, their chemical formula and Common Names: Native Metals (Can occur as Pure Metals) Silver-(Ag), Gold-(Au), Bismuth-(Bi),
    [Show full text]
  • Review of Biohydrometallurgical Metals Extraction from Polymetallic Mineral Resources
    Minerals 2015, 5, 1-60; doi:10.3390/min5010001 OPEN ACCESS minerals ISSN 2075-163X www.mdpi.com/journal/minerals Review Review of Biohydrometallurgical Metals Extraction from Polymetallic Mineral Resources Helen R. Watling CSIRO Mineral Resources Flagship, PO Box 7229, Karawara, WA 6152, Australia; E-Mail: [email protected]; Tel.: +61-8-9334-8034; Fax: +61-8-9334-8001 Academic Editor: Karen Hudson-Edwards Received: 30 October 2014 / Accepted: 10 December 2014 / Published: 24 December 2014 Abstract: This review has as its underlying premise the need to become proficient in delivering a suite of element or metal products from polymetallic ores to avoid the predicted exhaustion of key metals in demand in technological societies. Many technologies, proven or still to be developed, will assist in meeting the demands of the next generation for trace and rare metals, potentially including the broader application of biohydrometallurgy for the extraction of multiple metals from low-grade and complex ores. Developed biotechnologies that could be applied are briefly reviewed and some of the difficulties to be overcome highlighted. Examples of the bioleaching of polymetallic mineral resources using different combinations of those technologies are described for polymetallic sulfide concentrates, low-grade sulfide and oxidised ores. Three areas for further research are: (i) the development of sophisticated continuous vat bioreactors with additional controls; (ii) in situ and in stope bioleaching and the need to solve problems associated with microbial activity in that scenario; and (iii) the exploitation of sulfur-oxidising microorganisms that, under specific anaerobic leaching conditions, reduce and solubilise refractory iron(III) or manganese(IV) compounds containing multiple elements.
    [Show full text]
  • New Approaches for Extracting and Recovering Metals from Mine Tailings ⇑ Carmen Falagán , Barry M
    Minerals Engineering xxx (2016) xxx–xxx Contents lists available at ScienceDirect Minerals Engineering journal homepage: www.elsevier.com/locate/mineng New approaches for extracting and recovering metals from mine tailings ⇑ Carmen Falagán , Barry M. Grail, D. Barrie Johnson College of Natural Sciences, Bangor University, Deiniol Road, Bangor LL57 2UW, UK article info abstract Article history: Waste materials from metal mining, such as mineral tailings, often contain significant amounts of poten- Received 28 July 2016 tially valuable metals particularly where, as in many historic operations, the efficiency of flotation tech- Revised 7 October 2016 nologies used to concentrate target minerals was not as good as those currently available. A two-stage Accepted 10 October 2016 mineral leaching and metal recovery protocol was developed to extract copper from tailings generated Available online xxxx as waste materials in two mines currently operating in Spain and Serbia. The most effective extraction of copper (84 to >90%) was achieved by bioleaching the tailings at 45 °C, using a defined microbial con- Keywords: sortium, where elemental sulfur was added to the tailings and the pH of leach liquors allowed to fall to Bioleaching pH 1, at which point anaerobic conditions were imposed. The thermo-tolerant acidophiles Acidophile Tailings Acidithiobacillus caldus and Sulfobacillus thermosulfidooxidans emerged as the dominant bacteria present Copper in both tailings leachates under these conditions. Copper present in the pregnant leach solutions (PLS) Silver produced were next precipitated as a sulfide phase using hydrogen sulfide generated in a low pH (4.0) sulfidogenic bioreactor. The off-line system used allowed the copper present in PLS to be precipitated selectively without the need to adjust the pH of the PLS, though small amounts of silver present in PLS from one of the tailings samples co-precipitated with copper sulfide.
    [Show full text]
  • Evaluating Process Options for Treating Some Refractory Ores
    EVALUATING PROCESS OPTIONS FOR TREATING SOME REFRACTORY ORES By 1Mark Aylmore and 2Ashraf Jaffer 1Bateman Engineering Pty Ltd Australia 2Bateman Engineering Pty Ltd South Africa Presenter and Corresponding Author Mark Aylmore [email protected] ABSTRACT A significant contemporary challenge for gold mining companies is to define economic process options for treating more complex ore bodies as the less refractory ores become depleted. Demonstration of economic treatment options allows gold companies to maintain and increase their ore reserves. The selection of options to treat a specific ore is significantly impacted by factors such as mineralogy, precious metal grades and deportment, gold to sulphur ratios and hazardous impurities. Bateman Engineering has carried out a number studies to help mining companies evaluate further the potential for developing ore bodies. This paper provides two examples of work to evaluate the potential for treating a low grade ore with high carbonate and arsenic content and an ore with high silver grade. Capital and operating cost estimates for different methods of pretreatment were prepared and these estimated costs and ore sulfide grades then used to compare the process economics. 249 INTRODUCTION A significant contemporary challenge for gold mining companies is to define economic process options for treating more complex orebodies as the less refractory ores become depleted. Demonstration of economic treatment options allows gold companies to maintain and increase their ore reserves. Refractory gold ores are those that do not yield high gold recoveries in conventional cyanide- leaching circuits, even when the ore is finely ground. The cause of low gold recoveries can be either through the presence of naturally occurring ‘preg robbing’ carbonaceous materials or gold physically ‘locked’ in sulphide minerals.
    [Show full text]
  • Chalcopyrite Dissolution in Sulphate-Based Leaching and Bioleaching Systems
    ISSN: 1402-1757 ISBN 978-91-7439-XXX-X Se i listan och fyll i siffror där kryssen är LICENTIATE T H E SIS Department of Civil, Environmental and Natural Resources Engineering Mohammad Khoshkhoo Chalcopyrite Dissolution in Sulphate-Based Leaching and Bioleaching Systems Division of Minerals and Metallurgical Engineering ISSN 1402-1757 Chalcopyrite Dissolution in Sulphate-Based ISBN 978-91-7439-921-9 (print) ISBN 978-91-7439-922-6 (pdf) Leaching and Bioleaching Systems Luleå University of Technology 2014 Mohammad Khoshkhoo Chalcopyrite dissolution in sulphate-based leaching and bioleaching systems Mohammad Khoshkhoo Minerals and Metals Research Laboratory Department of Civil, Environmental and Natural Resources Engineering Luleå University of Technology SE- 971 87 Luleå Sweden June 2014 Printed by Luleå University of Technology, Graphic Production 2014 ISSN 1402-1757 ISBN 978-91-7439-921-9 (print) ISBN 978-91-7439-922-6 (pdf) Luleå 2014 www.ltu.se Abstract Chalcopyrite (CuFeS2) is the most abundant and the most economically important copper mineral. Increasing worldwide demand for copper accompanied by exhaustion of copper resources necessitate the development of new processes for treating lower-grade copper ores. Heap (bio)leaching of copper oxides and secondary sulphides (covellite (CuS) and chalcocite (Cu2S)) is a proven technology and a convenient process due to its simplicity and relatively low capital investment requirement. As a result, the technology appears to be an attractive process option for treatment of low-grade chalcopyrite ores as well. However, chalcopyrite is recalcitrant to leaching and bioleaching in conventional heaps: its dissolution is slow and it halts on a low level of copper extraction usually unacceptable for a commercial practice.
    [Show full text]
  • Processing Tests, Adjusted Cost Models and the Economies of Reprocessing Copper Mine Tailings in Chile
    metals Article Processing Tests, Adjusted Cost Models and the Economies of Reprocessing Copper Mine Tailings in Chile Malte Drobe 1,*, Frank Haubrich 2, Mariano Gajardo 3 and Herwig Marbler 4 1 Federal Institute for Geosciences and Natural Resources (BGR), Stilleweg 2, 30655 Hannover, Germany 2 G.E.O.S. Ingenieurgesellschaft mbH, Schwarze Kiefern 2, 09633 Halsbruecke, Germany; [email protected] 3 Servicio Nacional de Geología y Minería Av. Santa María, Providencia 0104, Chile; [email protected] 4 German Mineral Resources Agency (DERA) at the Federal Institute for Geosciences and Natural Resources (BGR), Wilhelmstrasse 25-30, 13593 Berlin, Germany; [email protected] * Correspondence: [email protected]; Tel.: +49-511-643-3189 Abstract: To increase resource efficiency, mining residues–especially tailings–have come into the focus of research, companies, and politics. Tailings still contain varying amounts of unextracted elements of value and minerals that were not of economic interest during production. As for primary mineral deposits, only a small share of tailings offers the possibility for an economic reprocessing. To minimize exploration expenditure, a stepwise process is followed during exploration, to estimate the likelihood of a project to become a mine or in this case a reprocessing facility. During this process, costs are continuously estimated at least in an order of magnitude. Reprocessing flowsheets for copper mine tailings in Chile were developed and costs and revenues of possible products from reprocessing were examined for a rough economic assessment. Standard cost models with capex and opex for flotation, leaching, and magnetic separation were adopted to the needs of tailings reprocessing.
    [Show full text]
  • Download The
    THIOSULFATE LEACHING OF NATURAL ACANTHITE ORE IN COPPER- AMMONIA-AMMONIUM SULFATE MEDIUM by Yueh (Yves) Lai B.Sc., University of Alberta, 2014 A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF APPLIED SCIENCE in THE FACULTY OF GRADUATE AND POSTDOCTORAL STUDIES (Materials Engineering) THE UNIVERSITY OF BRITISH COLUMBIA (Vancouver) April 2017 © Yueh (Yves) Lai, 2017 Abstract Silver is commonly present in acanthite in nature. Reagents like cyanide are used to extract silver from acanthite ores. However, cyanide can potentially damage human health and environment. The use of cyanide is tightly regulated, thus forcing the industry to seek for alternatives. Thiosulfate is currently the most promising alternative. The leaching chemistry of silver with thiosulfate is complex and maybe supplemented with additives such as ammonia, copper and even ethylenediaminetetraacetic acid. The efficiency of silver leaching is improved with the use of these additives. The use of cyanide for silver leaching in Navidad project in Argentina is not permitted, so the use of thiosulfate leaching as an alternative was investigated. The application of thiosulfate leaching to Navidad ores containing acanthite was the focus of this thesis. This thesis provides experimental evidence that supports the use of thiosulfate with additives as a promising alternative to conventional cyanidation method for the Navidad deposits and for similar deposits, wherever found. Thiosulfate leaching of silver is known for two pathways: silver in acanthite is substituted by cupric or by cuprous ion. The cupric pathway is thermodynamically more favourable, but various factors may affect extraction. Batch leaching tests showed that Navidad ore samples may be leached using thiosulfate, with silver extraction affected by variables including thiosulfate concentration, ammonia concentration, initial copper addition, pH, temperature, EDTA addition and the presence or absence of air sparging.
    [Show full text]
  • Department of Metallurgical Engineering
    OBJECTIVE QUESTION BANK Er. SUBRAT KUMAR BEHERA Lecturer in Metallurgy Department of Metallurgical Engineering ORISSA SCHOOL OF MINING ENGINEERING, KEONJHAR A Government of Odisha institution with National Repute Established in the Year 1956 (Approved by AICTE, New Delhi & Affiliated to SCTE&VT, Odisha,BBSR) Iron & Steel Making 1. Which is closest to the purest form of the iron? Cast Iron Wrought Iron Pig Iron Steel 2. The product of a commercial direct reduction process is: Liquid 1ron Pig iron Sponge iron Iron saturated with carbon. 3. Abrasion resistance of coke is measured by the M10 M40 Shatter test none 4. Which one of the following is not the irregularitie of the blast furnace? Hanging Slip Tapping Breakout 5. Which one of the following is not function of coke in the blast furnace ? Fuel Carburizer Reducing agent Oxidizing agent 6. Which one of the following is not the zone of the blast furnace? Granular zone Adhesive zone Cohesive zone Tuyere zone 7. Sulphide ore of iron is Magnetite Hematite Pyrites Limonite 8. Which one of the following furnace can be used to produce Alloy steels L D process open hearth furnace Electric Arc furnace Acid Bessemer process 9. Which one of the following is receptacle to collect the liquid slag and metal Bosh Stack Hearth Tuyere 10. Which one of the following process is Direct smelting Blast Furnace LD vacuum Arc Degassing (VAD) COREX 11. The important factors for producing low silicon pig iron in a blast furnace are Higher temperature and higher basicity Lower temperature and lower basicity Lower temperature and higher basicity Higher temperature and lower basicity 12.
    [Show full text]