Design and Analysis of Cognitive Focus Devices Ashley L

Total Page:16

File Type:pdf, Size:1020Kb

Design and Analysis of Cognitive Focus Devices Ashley L Worcester Polytechnic Institute Digital WPI Major Qualifying Projects (All Years) Major Qualifying Projects March 2017 Design and Analysis of Cognitive Focus Devices Ashley L. Stanley Worcester Polytechnic Institute Brianna Rosalee Fogal Worcester Polytechnic Institute Carolina E. Ramos Worcester Polytechnic Institute Connor James McGrath Worcester Polytechnic Institute Daniel Alexander Sturman Worcester Polytechnic Institute Follow this and additional works at: https://digitalcommons.wpi.edu/mqp-all Repository Citation Stanley, A. L., Fogal, B. R., Ramos, C. E., McGrath, C. J., & Sturman, D. A. (2017). Design and Analysis of Cognitive Focus Devices. Retrieved from https://digitalcommons.wpi.edu/mqp-all/2685 This Unrestricted is brought to you for free and open access by the Major Qualifying Projects at Digital WPI. It has been accepted for inclusion in Major Qualifying Projects (All Years) by an authorized administrator of Digital WPI. For more information, please contact [email protected]. Design and Analysis of Cognitive Focus Devices Major Qualifying Project Submitted to the Faculty of WORCESTER POLYTECHNIC INSTITUTE In Partial Fulfillment of the Requirements for the Degree of Bachelor of Science March 23, 2017 Submitted by: Brianna Fogal Connor McGrath Carolina Ramos Ashley Stanley Daniel Sturman Advisors: W.A. Bland Addison, Ph.D. Torbjorn Bergstrom, Ph.D. ABD Walter T. Towner, Jr., Ph.D. Helen G. Vassallo, Ph.D. Abstract The objective of this project was to design and manufacture a cognitive focus device, develop a business plan for the product, and determine if fidgets can relieve individuals of the modern, evolving world’s anxieties. The rationale of this project was to produce a product for adults in the academic and professional world and to understand how fidgets are used in developing and industrialized countries. The methods used were surveys, fidget testing and manufacturing, interviews with professionals and individuals who fidget, market and financial analysis, and academic research of the professional literature on this subject. The results were the creation of the Fidget Egg, the product commercialization of the Fidget Egg, and a discussion about how some people center themselves through the use of sacred or secularized objects to relieve oneself of the world’s anxieties. The conclusion reached by the team is that the Fidget Egg is a viable product that can empower consumers to direct their focus, and there is no ideal fidget for everyone. Additionally, there may be a correlation with the use of fidgets and the pressures of industrialization. i Abbreviations ADD: Attention Deficit Disorder ADHD: Attention Deficit Hyperactivity Disorder ASD: Autism Spectrum Disorder DSM: Diagnostic and Statistical Manual of Mental Disorders LLC: Limited Liability Company MQP: Major Qualifying Project ODS: Office of Disability Services ROI: Return on Investment WPI: Worcester Polytechnic Institute ii Acknowledgements The team would like to thank the four advisors: Bland Addison, Torbjorn Bergstrom, Walter Towner, and Helen Vassallo for their endless guidance and support throughout this project. The team also thanks Jessica Szivos and Laura Rosen from the Office of Disability Services for their vision, compassion, support, and life advice. The team is thankful for all of the volunteers who tested our product and the customers who bought and supported Fidget Egg, without whom the success of this product would not exist. Lastly, the team would like to thank Washburn Shops and Worcester Polytechnic Institute for giving this team the opportunity to learn and grow as young engineers, as students, and as a group of people who want to make a difference in this world. iii Table of Contents Abstract ............................................................................................................................................ i Abbreviations .................................................................................................................................. ii Acknowledgements ........................................................................................................................ iii Table of Contents ........................................................................................................................... iv Table of Tables .......................................................................................................................... vii Table of Figures ....................................................................................................................... viii Executive Summary ........................................................................................................................ x 1. Introduction and Problem Statement .......................................................................................... 1 2. Methods....................................................................................................................................... 2 2.1 Design Team Approach ......................................................................................................... 3 2.2. Business Approach ............................................................................................................... 3 2.2.1 Research.......................................................................................................................... 4 2.2.2 Fidget Egg Design Survey Analysis and Evaluation ...................................................... 4 2.2.3 Interviews ....................................................................................................................... 5 2.3 International and Global Studies Approach .......................................................................... 5 2.3.1 Literature Review ........................................................................................................... 5 2.3.2 Primary Research ............................................................................................................ 6 2.3.3 WPI Faculty, Staff, and Cultural Student Group Outreach ............................................ 6 3. Fidget Egg Design....................................................................................................................... 8 3.1 Design Team Objective ......................................................................................................... 8 3.2 Rationale................................................................................................................................ 8 3.3 State of the Art ...................................................................................................................... 9 3.3.1 Executive Functioning and ADHD ................................................................................. 9 3.3.2 Existing Studies .............................................................................................................. 9 3.3.3 Existing Products .......................................................................................................... 10 3.4 Approach ............................................................................................................................. 15 3.5 Product Design Methods ..................................................................................................... 15 3.5.1 Axiomatic Design Decomposition ................................................................................ 15 3.5.2 Building the Product ..................................................................................................... 21 3.5.3 Testing the Fidget ......................................................................................................... 30 3.6 Design Team Results ........................................................................................................... 31 3.6.1 Design Changes ............................................................................................................ 31 3.6.2 Product Usefulness ....................................................................................................... 36 3.6.3 Final Product Description ............................................................................................. 38 3.6.4 Axiomatic Design Check .............................................................................................. 40 3.6.5 Future Design Ideas ...................................................................................................... 40 3.7 Design Team Discussion ..................................................................................................... 41 4. Business Plan ............................................................................................................................ 43 4.1 Business Description ........................................................................................................... 43 iv 4.1.1. Vision........................................................................................................................... 43 4.1.2. Value Proposition of Fidget Egg ................................................................................. 46 4.1.3. Business Model............................................................................................................ 50 4.1.4. Legal Structure and Intellectual Property .................................................................... 51 4.2 Market Analysis .................................................................................................................
Recommended publications
  • Chapter 10 Introduction to Axiomatic Design
    Chapter 10 Introduction to Axiomatic Design This presentation draws extensively on materials from [Suh 2001]: Suh, N. P. Axiomatic Design: Advances and Applications. New York: Oxford University Press, 2001. ISBN: 0195134664. Example: Electrical Connector Male connector Plastic Compliant pin overmolding (for permanent connection) Plastic Female connector overmolding Multiple layers will be stacked together to obtain an entire connector. Figure by MIT OCW. Axiomatic Design Framework The Concept of Domains {CAs} {FRs} {DP} {PVs} Mapping Mapping Mapping Customer domain Functional domain Physical domain Process domain Four Domains of the Design World. The {x} are characteristic vectors of each domain. Figure by MIT OCW. After Figure 1.2 in [Suh 2001]. Characteristics of the four domains of the design world Domains Character Customer Domain Functional Domain Physical Domain {DPs} Process Domain {PVs} Vectors {CAs} {FRs} Manufacturing Attributes which Functional Physical variables Process variables that consumers desire requirements which can satisfy the can control design specified for the functional parameters (DPs) product requirements Materials Desired performance Required Properties Micro-structure Processes Software Attributes desired in Output Spec of Input Variables or Sub-routines machine the software Program codes Algorithms Modules codes compilers Program codes modules Organization Customer satisfaction Functions of the Programs or Offices People and other organization or Activities resources that can support the programs Systems Attribute desired of Functional Machines or Resources (human, the overall system requirements of the components, financial, materials, system sub-components etc.) Business ROI Business goals Business structure Human and financial resource Table by MIT OCW. After Table 1.1 in [Suh 2001]. Definitions �Axiom: Self-evident truth or fundamental truth for which there is no counter examples or exceptions.
    [Show full text]
  • Reliability Improvement of Car Sliding Door Using Axiomatic Approach
    Proceedings of ICAD2004 The Third International Conference on Axiomatic Design Seoul – June 21-24, 2004 ICAD-2004-18 RELIABILITY IMPROVEMENT OF CAR SLIDING DOOR USING AXIOMATIC APPROACH Gabriele Arcidiacono Paolo Citti Vincenzo Fontana Tommaso Martelli [email protected] [email protected] [email protected] [email protected] Università di Firenze Università di Firenze ELASIS S.C.p.A. Università di Firenze Via Santa Marta, 3 – 50139 Via Santa Marta, 3 – Via Ex Aeroporto s.n. Via Santa Marta, 3 – 50139 Firenze, Italy 50139 Firenze, Italy 80038 Napoli, Italy Firenze, Italy ABSTRACT The FMEA is used to identify possible failure modes, their causes, In this paper, we discuss the potential utilization of the Axiomatic and the effects of these failures. The proper identification of Design methods in order to enhance the development of Failure failures may lead to solutions that increase the overall reliability Modes and Effects Analysis. and safety of a product. At first the Axiomatic Design allows to describe the optimisation It is very important to define how the companies execute this of decomposition physical-functional of the project. Due to this technique. In particular in this paper we have analyzed the Fiat operation and to the esteemed RPN (RPNe) it is possible to Auto FMEA. It is based on the drawing up of two technical enlighten the most critical components, so to establish a priority reports: order for intervening on components. To use the FMEA it is important to have a very good knowledge of these components − Correlation Matrix (CM) to make a new decomposition until reaching the functional − Risk Matrix (RM) requirements (FRs) and design parameters (DPs) leaves.
    [Show full text]
  • The Minimum Constraint Design and the First Axiom
    Proceedings of ICAD2009 The Fifth International Conference on Axiomatic Design Campus de Caparica – March 25-27, 2009 ICAD-2009-15 THE MINIMUM CONSTRAINT DESIGN AND THE FIRST AXIOM António Gabriel Santos. Arlindo Silva. [email protected] [email protected] Department of Mechanical and Industrial Engineering, Instituto Superior Técnico/ICEMS Faculty of Science and Technology, Universidade Técnica de Lisboa The New University of Lisbon Av. Rovisco Pais, Campus de Caparica, 2829-516 Caparica, Portugal 1049-001 Lisboa, Portugal António Gonçalves-Coelho. [email protected] UNIDEMI, Department of Mechanical and Industrial Engineering, Faculty of Science and Technology, The New University of Lisbon Campus de Caparica, 2829-516 Caparica, Portugal products with increased performance and reliability at a low ABSTRACT cost and in a short time. Minimum Constraint Design (MinCD) is a design One way to make products unresponsive to geometrical approach for mechanical systems yielding to the required uncertainties within certain limits is to apply the Minimum performance with a minimum number of external constraints Constraint Design (MinCD) approach. MinCD recommends at each one of the system’s components. supporting and guiding each body only at points — and at as The method is claimed to be appropriate for the design few points as possible — to attain the desired performance, at of mechanical systems, allowing for assembling with zero the same time conferring to the product the adequacy to the looseness and binding, zero distortion and no residual stress. real world conditions. Such designs can be implemented with simple machining, A brief presentation of the Minimum Constraint Design loose manufacturing tolerances and semiskilled labour for (MinCD) approach and a short explanation of Axiomatic both assembling and disassembling.
    [Show full text]
  • Design-In of Reliability Through Axiomatic Design Introduction
    AGJSR 31 )Special Issue) 2013: 314-324 Dezhen Yang et al Design-in of Reliability through Axiomatic Design Dezhen Yang; Yi Ren; Zili Wang and Linlin Liu School of Reliability and Systems Engineering, Beihang University, Beijing, China ABSTRACT Sp. Issue 2013/ # Paper 2 To completely meet the requirements of reliability design in the Corresponding author: product designing, an axiom-based Design-in Reliability approach Yi Ren is proposed. In light of the axiomatic design principles, products are Mailing address: No. 37, Xueyuan Road, Haidian District, Beijing, designed preliminarily to establish their functional requirements. 100191, P. R. China According to these, functions preserving requirements are augmented, E-mail: [email protected] which constitute a Functional Requirement Preserving domain included Tel: +86-10-82313173 in functional domain, and derives the parameterized solution for Fax: +86-10-82317663 reliability design systematically. Subsequently, the design parameters are augmented and optimized to achieve the functions preserving requirements. Mapping model of the augmented functional domain and the physical domain is established. And a solutions evaluation approach KEYWORDS based on Independence Axiom is proposed. Ultimately, via identifying the potential failure modes from the perspective of the disappearance Keywords-Reliability; or reduction of functions preserving capability, a control process is Independence axiom; Axiomatic design; Failure modes mitigation; elaborated to mitigate the failure modes on the basis of independence Functional requirement preserving axiom and logic decision in order for the reliability requirements to be domain; Temperature sensor implemented. Being exemplified by the design of a temperature sensor, the present study demonstrates that all approaches are feasible, efficient, and could be applied in real engineering scenarios.
    [Show full text]
  • Implementation of Dmaic and Axiomatic Design to the Creation of a Basic Smartphone Application
    TREBALL FI DE GRAU Grau en Enginyeria Mecànica IMPLEMENTATION OF DMAIC AND AXIOMATIC DESIGN TO THE CREATION OF A BASIC SMARTPHONE APPLICATION Memòria i Annexos Autor: Antoni Amat Serra Director: Joan Martínez Sánchez Convocatòria: Octubre 2017 Implementation of DMAIC And Axiomatic Design to the Creation of A Basic Smartphone Application ACKNOWLEDGEMENT I would like to thank the Politecnico di Bari to give me the opportunity to study for one semester in Bari, also to Yasamin Eslami for helping me during all the process to finish this project. I would like to specially thank Joan Martinez to accept directing my work in such a short notice giving me the opportunity to finish my bachelor. I would like to thank my Parents to give the opportunity to study and to carry out this project abroad and also for giving me the spirit to finish the Bachelor. I Implementation of DMAIC And Axiomatic Design to the Creation of A Basic Smartphone Application ABSTRACT This project implements two theories to the creation of a basic smartphone application: DMAIC and Axiomatic Design Theory. DMAIC is very often used methodology that very successful enterprises had already implemented; it is used in Six Sigma, a procedure that ensures a large reduction on the errors of the enterprise processes. This method has been used by a lot of companies all over the world providing them a large increase of quality producing. Axiomatic Design Theory takes its name from the fact that it is composed of two Axioms that have to be accomplished when implementing this theory. It is a method meant to design with a very specific order.
    [Show full text]
  • Icad-2011-29 Teaching Axiomatic Design To
    Proceedings of ICAD2011 The Sixth International Conference on Axiomatic Design Daejeon – March 30-31, 2011 ICAD-2011-29 TEACHING AXIOMATIC DESIGN TO STUDENTS AND PRACTITIONERS Gyung-Jin Park [email protected] Department of Mechanical Engineering Hanyang University 1271 Sa 3-dong Sangnok-gu Ansan City 426-791, Gyeonggi-do, South Korea ABSTRACT without much knowledge. According to this trend, synthesis (design) is quite important to exploit the analysis results. The Recently, design education has been significantly emphasis of engineering education is being shifted from emphasized in engineering schools because students can analysis to synthesis. develop not only design skills but also creativity, an Design education should be newly developed for the engineering philosophy, the right attitude for teamwork, etc. paradigm shift. It is well known that the definition of a design Design education is emphasized in industry as well. In the education program is quite difficult. How to teach design is design courses, students or practitioners mostly carry out a not rigorously established yet. When we ask “how do we teach team project for some design example and brainstorming is design?” the answer is frequently “well.” Two educators rarely utilized in the thinking process. Generally, a specific method is agree on the topic. The reason is that design education is employed in the detailed design process. However, they do not more like a philosophy and there are few pedagogical tools or usually utilize design methodologies with a definite form in methods. The design process is generally classified into three the conceptual design process. Instead, brainstorming and steps such as conceptual design, preliminary design and discussion between team members are adopted.
    [Show full text]
  • Manufacturing System Design Based on Axiomatic Design: Case of Assembly Line
    A Service of Leibniz-Informationszentrum econstor Wirtschaft Leibniz Information Centre Make Your Publications Visible. zbw for Economics Hager, Triki; Wafik, Hachicha; Faouzi, Masmoudi Article Manufacturing system design based on axiomatic design: Case of assembly line Journal of Industrial Engineering and Management (JIEM) Provided in Cooperation with: The School of Industrial, Aerospace and Audiovisual Engineering of Terrassa (ESEIAAT), Universitat Politècnica de Catalunya (UPC) Suggested Citation: Hager, Triki; Wafik, Hachicha; Faouzi, Masmoudi (2017) : Manufacturing system design based on axiomatic design: Case of assembly line, Journal of Industrial Engineering and Management (JIEM), ISSN 2013-0953, OmniaScience, Barcelona, Vol. 10, Iss. 1, pp. 111-139, http://dx.doi.org/10.3926/jiem.728 This Version is available at: http://hdl.handle.net/10419/188815 Standard-Nutzungsbedingungen: Terms of use: Die Dokumente auf EconStor dürfen zu eigenen wissenschaftlichen Documents in EconStor may be saved and copied for your Zwecken und zum Privatgebrauch gespeichert und kopiert werden. personal and scholarly purposes. Sie dürfen die Dokumente nicht für öffentliche oder kommerzielle You are not to copy documents for public or commercial Zwecke vervielfältigen, öffentlich ausstellen, öffentlich zugänglich purposes, to exhibit the documents publicly, to make them machen, vertreiben oder anderweitig nutzen. publicly available on the internet, or to distribute or otherwise use the documents in public. Sofern die Verfasser die Dokumente unter Open-Content-Lizenzen (insbesondere CC-Lizenzen) zur Verfügung gestellt haben sollten, If the documents have been made available under an Open gelten abweichend von diesen Nutzungsbedingungen die in der dort Content Licence (especially Creative Commons Licences), you genannten Lizenz gewährten Nutzungsrechte. may exercise further usage rights as specified in the indicated licence.
    [Show full text]
  • A Design Framework for Additive Manufacturing Based on The
    Iowa State University Capstones, Theses and Graduate Theses and Dissertations Dissertations 2018 A design framework for additive manufacturing based on the integration of axiomatic design approach, inverse problem-solving and an additive manufacturing database Sarath Chennamkulam Renjith Iowa State University Follow this and additional works at: https://lib.dr.iastate.edu/etd Part of the Industrial Engineering Commons Recommended Citation Chennamkulam Renjith, Sarath, "A design framework for additive manufacturing based on the integration of axiomatic design approach, inverse problem-solving and an additive manufacturing database" (2018). Graduate Theses and Dissertations. 16796. https://lib.dr.iastate.edu/etd/16796 This Thesis is brought to you for free and open access by the Iowa State University Capstones, Theses and Dissertations at Iowa State University Digital Repository. It has been accepted for inclusion in Graduate Theses and Dissertations by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. A design framework for additive manufacturing based on the integration of axiomatic design approach, inverse problem-solving and an additive manufacturing database by Sarath Chennamkulam Renjith A thesis submitted to the graduate faculty in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Major: Industrial Engineering Program of Study Committee: Gül Erdem Okudan Kremer, Major Professor Michael Scott Helwig Mark Mba-Wright The student author, whose presentation of the scholarship herein was approved by the program of study committee, is solely responsible for the content of this thesis. The Graduate College will ensure this thesis is globally accessible and will not permit alterations after a degree is conferred.
    [Show full text]
  • Design Validation Using Axiomatic Design in Spacecraft Mechanism
    International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 3 Issue 3, March - 2014 Design Validation using Axiomatic Design in Spacecraft Mechanism Abraham Mathews Valyakala1. , Sujithkumar N.2., Dileeplal J.3., Y. S. Shankar Narayan4. 1P. G. Scholar, Department of Mechanical Engineering, Mar Athanasius College of Engineering, Kothamangalam, Kerala, India 2,4Scientist/Engineer, Reliability Assurance Mechanical Division, Systems Reliability Group, ISRO Satellite Centre, Bangalore, Karnataka, India 3Associate Professor, Department of Mechanical Engineering, Mar Athanasius College of Engineering, Kothamangalam, Kerala, India Abstract— Unfurlable antenna (UFA) mechanism is a designers more creative and reduces random search process, foldable antenna reflector which is used for the purpose of trial and error process, design selection process etc. Axiomatic receiving and transmitting signals in space. UFA contains design principles are initially used for synthesis of design. The number of mechanism subassemblies and components which principles which axiomatic design is based on are universal in should function properly for the success of the mission. The nature and can be used for design validation. This can be done process of validating the UFA design ensures that all functional by checking whether the given design satisfies the axioms requirements are met in the design. In this paper an axiomatic design methodology is used for the design validation of UFA. described in axiomatic design. It consists of two axioms. One Level of robustness of the design can be evaluated by assessing is the independence axiom and the other is the information the design against the axioms stated in the axiomatic design axiom [6]. methodology. A good design satisfies both axioms.
    [Show full text]
  • An Information Framework for Engineering
    TABLE OF CONTENTS 1. INTRODUCTION ....................................................................................................................... 6 1.1 BACKGROUND .......................................................................................................................... 6 1.2 ENGINEERING DESIGN - A FORM OF INFORMATION PROCESSING................................................. 6 1.3 RESEARCH IN ENGINEERING DESIGN.......................................................................................... 7 1.4 SCOPE AND MOTIVATION OF THIS THESIS .................................................................................. 8 1.5 STRUCTURE OF THIS THESIS ...................................................................................................... 9 2. SCIENTIFIC FRAMEWORK FOR RESEARCH IN DESIGN THEORY............................ 11 2.1 DEFINITION OF SCIENTIFIC THEORY AND DISCUSSION ON HOW THEORIES CAN BE USED............ 11 2.2 RESEARCH PROCESS MODEL FOR DESIGN THEORY................................................................... 12 3. CONTEXT OF THIS THESIS ................................................................................................. 14 3.1 INDUSTRIAL CONTEXT: THE DESIGN PROCESS ......................................................................... 14 3.1.1 Introduction to the design process roadmap..................................................................... 15 3.1.2 Putting together a project specific design process from the activities in the roadmap....... 16 3.1.3
    [Show full text]
  • Design for Additive Manufacturing Based on Axiomatic Design Method
    Design for Additive Manufacturing Based on Axiomatic Design Method Konstantinos Salonitis Manufacturing Department, Cranfield University, Bedford, UK [email protected] Abstract Additive manufacturing technology promises to revolutionize the way products are manufactured and supplied to the customer. Existing design methods however do not take full advantage of the additive manufacturing processes capabilities. This paper presents a framework to improve the current design approach for additive manufacturing using an axiomatic design approach. The proposed framework is used both for the development of new products and the re-designing of existing products that are designed for conventional manufacturing. A case study is presented for the validation of the framework that highlights how this method can be used for design validation and decision making. Keywords: Product development; design method; additive manufacturing 1 1. Introduction Conventional manufacturing processes, such as machining, pose limitations on the component geometries that can be produced. These limitations often result in structures that are inefficient, as many areas of a component have excess material that cannot be removed physically or in a cost effective way through conventional methods. Additive Manufacturing (AM) processes provide the opportunity to address the problem of inefficient structures. They allow components to be manufactured in a bottom-up approach with laying material only where it is required. One of the key advantages of such processes is the fabrication of components and even complete assemblies directly derived from a 3D CAD model without the need for process planning in advance of manufacturing. Various methods that allow the “building” of three-dimensional objects in sequence by adding layers over each other have been developed [1].
    [Show full text]
  • A ROADMAP for DECOMPOSITION: ACTIVITIES, THEORIES, and TOOLS for SYSTEM DESIGN by Derrick Tate
    A ROADMAP FOR DECOMPOSITION: ACTIVITIES, THEORIES, AND TOOLS FOR SYSTEM DESIGN by Derrick Tate Submitted to the Department of Mechanical Engineering on December 28, 1998 in partial fulfillment of the requirements for the degree of Doctor of Philosophy Abstract Many design theories lack scalability to systems with many elements. They provide guidance to designers about specific facets of a design task but are too cumbersome to apply thoroughly from conceptual to detailed design. Thus the opportunity for rational design is missed. Axiomatic design (AD) seems ideal for directing the design of large systems because it proposes general principles and a recursive design process. AD provides a fundamental basis for understanding decision making during design. It contains representations for the design object (a hierarchy of functional requirements, design parameters, and design matrices) and the design process (decomposition and zigzagging) combined with rules for decision making (the independence and information axioms). Challenges remain, however, in implementing the theory to large system designs. The challenge addressed in this thesis is decomposition, the activity through which details of the design emerge. In decomposition, FRs satisfied by conceptual DPs are reduced into sets of sub-FRs. This activity is repeated until the design is completely embodied as a physical system of hardware and/or software. A question asked about decomposition concerns consistency: How can decisions about sub-FRs, and the rest of the decomposed design, be made so that they match the design decisions and representations of the design that were made at higher levels of the design hierarchy? To enable designers to do this, this thesis extends AD by providing a model of the decomposition process that identifies the activities performed and provides guidelines and tools to assist the designers.
    [Show full text]