GMC/Buick Blend – N911

Description 1”x2” tile made in a specific blend of glossy and matte finish colors for use in GMC/Buick dealerships. The glass are mounted in a staggered or brick layout on sheets for ease of handling and ease of installation, if site adjustments are necessary the sheets can be easily cut or mosaic pieces can be removed from the backing.

Features & Benefits  Color blend designed specifically for GMC/Buick,  Easy to clean, low maintenance surface,  Colors won’t fade or deteriorate.

Industry Standards All Reflections In Glass Tile products are designed to exceed the requirements of ANSI A137.2 for fused glass wall tiles.

Where To Use Designed for use as an interior/exterior wall tile, wherever a wall tile is required.

Limitations  Glass tile should not be installed as a floor tile unless precautions are taken to address slipping,  Substrates should be dimensionally stable with sufficient rigidity,  Crack isolation membranes should be used.

Installation  Glass tile should be installed with a premium two component modified thin-set mortar,  Grout joints should be 1/16” wide,  Grout with non-sanded grout for ease of grouting and to minimize the potential for scratching of the surface of the glass,  Expansion/control joints should be installed at 12 to 16’ intervals, or wherever the substrate changes,  All grout joints at inside corners and wherever glass tile abuts a restraining surface should be filled with a compressible jointing material.

Cleaning Use any commercial cleaning product that is suitable for glass or glass tile and is non-abrasive. Cleaning products should be tested to ensure that they are not harmful to the grout.

Ordering  Orders normally ship within 1 week  A handling charge of $30.00 will be applied to orders of less than 7 sheets  Orders should be faxed to 604.421.7544  Specify “2x1 GMC/Buick Blend N911” on your purchase order  Units for ordering (UOM) are sheets ( approx. 0.97 sq.ft./sheet)

Reflections In Glass Tile products are made in Canada exclusively for DAL-Tile [email protected] 800.667.566