MA Catalogue
U2-360° World Tour Index of contents
System Philosophy Network 58 Introduction 5 Networking inside 60 MA System Integration 6 Network Protocols and Standards 61 MA NPU 62 Control 8 MA NSP 63 Welcome to the Family 10 MA 2PortNode onPC + onPC pro 64 grandMA2 distinctive characteristics 12 MA 2PortNode 65 grandMA2 full-size 14 DMX Booster 1 in 8 68 grandMA2 light 16 DMX-Merger 69 grandMA2 ultra-light 17 Optoisolator-Box 69 grandMA2 replay unit 18 Demux-Box 2-channel 70 grandMA2 faderwing 18 Demux-Box 1/6-channel 71 grandMA2 onPC 19 Demux 4 PCB, DUX-LS4 72 grandMA2 remote 19 Demux 1/6 PCB 72 grandMA 3D 20 Demux 2 PCB Maxi 73 grandMA ultra-light 22 DMX Optoisolator PCB 73 grandMA micro 22 grandMA pico 23 MA – The company 74 grandMA remote 23 MA Lighting 76 MA System 24 Support and Service 76 Lightcommander II 48/6 and 24/6 26 MA Lighting University 77 Lightcommander 12/2 Desk- and 19“-Rack Version 27 News and Brochures 78 MA Lighting online 79 Video 28 MA worldwide 80 MA VPU 30 Extract of worldwide MA Lighting References 82 MA-Content-Package 35
Dimming 36 Dimming Solutions 38 dimMA 40 dimMA compact 42 dimMA compact RCBO 44 MA NDP 46 MA Digital Dimmer Touring and Wallmount 48 MA Digital Dimmer Wallmount 50 MA Digital Dimmer Touring-Packs 52 MA Digital Dimmer Touring-Racks 54 Technical data 57
4 Introduction
With its system consisting of components for control, video, dimming Whereas the grandMA2 lighting controls are flexible multimedia controls, and network MA Lighting has achieved not only a unique status on the system’s MA-Net2 with enormous speed and capacity is responsible the market but has established a benchmark for these technologies for the time synchronous and steady output of the widest data flow. too. Moreover the MA-Net2 enables the complete integration of software tools like grandMA 3D and grandMA2 onPC as well as the powerful Individually, each element is fully developed, powerful and extremely hardware of the MA VPU (Video Processing Unit) and can also be used competitive. All of them are DMX compatible and thus can be used for bi-directional communication with the digital installation dimmer in stand-alone environments. However, as a complete system the MA dimMA. components build a synergy that is absolutely unequalled. This is based on two sections – the grandMA2 lighting controls at the heart and the Thus MA is the only fully-integrated system on the market which is MA-Net2 as internal system language. unrivalled.
“The whole is much greater than the sum of its parts.”
Control Video Dimming Network
With the grandMA2 consoles, the MA VPU (Video Processing Unit), Next to the products and system elements, MA Lighting offers a variety the MA NPU (Network Processing Unit), the MA NSP (Network Signal of further renown products for control, dimming and DMX processing. Processor) and the digital installation dimmer dimMA MA Lighting They are all extremely reliable and many of them marked milestones. offers a fully integrated MA System that supplies optimal solutions for Among them is the Lightcommander series as well as the popular touring sophisticated projects with complex system requirements. All system dimmers which are also available in a special wall-mount version. components communicate via MA-Net2 (Ethernet). Because of this the different types of signals do not need to run on different systems.
5 MA System Integration Control
Video
Fader expansion – grandMA2 faderwing
Video integration – MA VPU (Video Processing Unit)
Dimming Network
• • •
Parameter expansion – MA NPU (Network Processing Dimmer integration with feedback function Unit) – up to 65,536 parameters per session
6 grandMA2 – Multi-User-Mode and backup solution (via 1GB/s MA-Net2)
Live show controller, backup system and Preprogramming Tool – grandMA2 onPC and grandMA onPC
grandMA2 full-size Preprogramming and visualisation – grandMA 3D
grandMA2 remote
For further information about the MA System and parameter expansion with MA NPU, please refer to page 60.
Signal distribution – MA 2Port Nodes and MA NSP (Network Signal Processor) as 4Port Node
7 Control
8 Teatro Colón, Buenos Aires, Argentina
9 Welcome to the Family
grandMA2
grandMA2 full-size (with faderwing) • Real-time control for 65,536 parameters per session in connection with MA NPU (up to 256 DMX universes) • 8,192 HTP -/LTP-parameters built in (6 x DMX out) • 3 internal TFT wide mode touchscreens (15.4” WXGA) • 2 external TFT screens can be connected (UXGA, can be touchscreens) • 1 internal command screen – multi-touch (9” SVGA)* S. 14
grandMA2 light grandMA2 ultra-light • Real-time control for 65,536 • Real-time control for 65,536 parameters per session in parameters per session in connection with MA NPU connection with MA NPU (up to 256 DMX universes) (up to 256 DMX universes) • 4,096 HTP-/LTP-parameters • 4,096 HTP-/LTP-parameters built in (6 x DMX out) built in (6 x DMX out) • 2 internal TFT wide mode touchscreens (15.4” WXGA) • 1 internal TFT wide mode touchscreen (15.4” WXGA) • 2 external TFT screens can be connected (UXGA, • 2 external TFT screens can be connected (UXGA, can be touchscreens) can be touchscreens) S. 16 S. 17
grandMA2 replay unit grandMA2 remote • Real-time control for 65,536 • Convenient remote control for all parameters per session in important functions of the grandMA2 connection with MA NPU range (up to 256 DMX universes) • High distances and safe use with • 4,096 HTP/LTP-parameters built in (6 x DMX out) all grandMA2 consoles • No internal faders or buttons – easy to protect • Numerous remote interfaces S. 18 S. 19
grandMA2 onPC “My first grandMA” • Comprehensive and powerful software- MA 2Port Nodes onPC with grandMA2 onPC tool for all standard computers • Supports all functions of the grandMA2 consoles with authentic look and feel
S. 19
10 grandMA 3D
grandMA 3D – Professional preprogramming for grandMA2 and grandMA • Real-time 3D visualisation of all important functions and effects of luminaires, moving lights & LEDs • Bi-directional exchange of data with the grandMA consoles of all series – using the same setup
S. 20 grandMA ‘series 1’
grandMA ultra-light grandMA micro • Real-time control for up • Real-time control for up to to 64 DMX universes/ 1,024 DMX parameters 16,384 parameters • Showfile-compatibility within the (Expansion Mode) grandMA range • Extensive networking • 1 internal, high resolution functionality incl. Multi-User, TFT-colour touchscreen Backup, Parameter Expansion, etc. S. 22 S. 22
grandMA pico grandMA remote • Real-time control for up to • Convenient remote control for the 1,024 DMX parameters grandMA range • Showfile-compatibility within • Bi-directional communication via the grandMA range wireless LAN • 1 internal, high resolution TFT-colour touchscreen S. 23 S. 23
Lightcommander
Lightcommander II 48/6 Lightcommander 12/2 and 24/6 Desk- and 19“-Rack Version • Robust steel-housing with • Guidance through the menu solid wooden side profiles via LC-display • Channel doubling in wide mode • Channel doubling in wide mode • Live and blind mode for • Live and blind mode for programming and modifying programming and modifying • Master-Slave mode and MIDI • Master-Slave mode and MIDI
S. 26 S. 27
11 grandMA2 distinctive characteristics
• Up to 65,536 parameters per session in connection with MA NPU • All command keys stay in the same place with the different consoles • Up to 32 sessions possible; 200 stations per session • Buttons are silent, individually • Robust and reliable solid-state-disc (flash-memory) – no HDD backlit and individually dimmable
• 2 x 1Gbit/s Ethercon • 2 motorized A/B fader (100mm)
• Up to 5 USB 2.0 connectors (2 x on the back of the console, 2 x on the monitor • All encoders are nonwearing, wing, 1 x within the drawer) with magnetic click • Powercon and Ethercon connectors, XLR 3pin for LTC (Linear Timecode) and sound
• Connectivity: 2 x DVI-I, Midi in / out, analog remote input, Ethernet, LTC, sound, USB, DMX in / out
• Motorized faderwing available • Motorized monitor wing* • Keyboard and storage integrated*/** (connected via MA-bus)
12 • Touchscreens: • 2 external screens can be • Command monitor with 15.4“ WXGA (1,280 x 800) connected (can be touchscreens multi-touch*: 9“ SVGA via USB; individual resolutions) (800 x 480)
grandMA2 full-size
*US Patent pending **Does not apply for grandMA2 ultra-light
13 grandMA2 full-size
• Real-time control for 65,536 para The new signature console of MA Lighting is the grandMA2 full-size. It controls all kinds of meters per session in connection with lighting genres like conventionals, moving lights, LEDs, video and media. MA NPU (up to 256 DMX universes) Equipped with the most up-to-date technology and even some special tools (e.g. keyboard • 8,192 HTP-/LTP-parameters built-in drawer or multi-touch command screen) the grandMA2 full-size is at home in all lighting • 6 x DMX out segments. Intuitive and fast control over all connected fixtures and channels in different styles is self-evident. Furthermore the newly developed faderwing provides in addition up • 3 internal TFT wide mode touch- to 60 executor faders over almost unlimited amount of pages. screens (15.4” WXGA) • 2 external TFT screens can be Moreover the grandMA2 full-size can read grandMA ‘series 1’-showfiles and is able to run in connected (UXGA, can be touch- a special ‘series 1’-mode. That means full compatibility with ‘series 1’-sessions. All command screens) keys within the new series can be found in the same place for easy operation. The grandMA2 offers a highly flexible and comfortable way of programming, including nearly infinite num- • 1 internal command screen – bers of presets, cues, pages, sequences and effects. multi-touch (9” SVGA)* • 30 motorized executor faders • Built-in keyboard drawer* • Built-in UPS • 2 Ethercon connectors • 5 USB 2.0 connectors • Motorized monitor wing* • 2 motorized A/B fader 100mm • Individually backlit and individually dimmable, silent keys
• grandMA2 faderwing available • Smart accessories, e.g. magnetic plates • 5 x USB 2.0 connectors (connection via MA-bus) for easy labelling (2 x on the back of the console, 2 x on the monitor wing, 1 x within the drawer)
*US Patent pending
14 Art. No Art. No Dimensions (w x h x d) weight (kg) 120111 grandMA2 full-size 120111 1,284 x 204 x 661mm, 50.6 x 8 x 26inch 54 120141 MA remote control package 121030 MA Case grandMA2 full-size, without wheels, (by Amptown) Scope of delivery: Built-in keyboard, dust cover, desk lamp 121029 MA Case grandMA2 full-size, with wheels, (by Amptown) 120131 Dust cover grandMA2 full-size 120122 MA LED desk lamp grandMA2 120121 grandMA2 faderwing 130032 MA NPU (Network Processing Unit)
15 grandMA2 light
• Real-time control for 65,536 para meters per session in connection with MA NPU (up to 256 DMX universes) • 4,096 HTP-/LTP-parameters built-in • 6 x DMX out • 2 internal TFT wide mode touch- screens (15.4” WXGA) • 2 external TFT screens can be connected (UXGA, can be touch- screens) • 1 internal command screen – multi-touch (9” SVGA)* • 15 motorized executor faders • Built-in keyboard drawer* • Built-in UPS • 2 Ethercon connectors • 5 USB 2.0 connectors • Motorized monitor wing* • 2 motorized A/B fader 100mm With the grandMA2 light, MA Lighting offers a compact version of the new grandMA2 full-size • Individually backlit and individually featuring 4,096 parameters, 15 motorized executor faders on board and two touchscreens. All dimmable, silent keys additional features as well as all command keys are the same as with the grandMA2 full-size.
The grandMA2 light is the optimal tool for control of all kinds of lighting genres like conventionals, moving lights, LEDs, video and media. Intuitive and fast control over all connected fixtures and channels in different styles is possible. The grandMA2 light can handle nearly infinite number of presets, cues, pages, sequences and effects. It is also a perfect backup solution for the grandMA2 full-size. The console features a compatibility to the grandMA ‘series 1’.
Built-in keyboard drawer*
Art. No Art. No Dimensions (w x h x d) weight (kg) 120112 grandMA2 light 120112 935 x 204 x 652mm, 36.8 x 8 x 25.7inch 44 120141 MA remote control package 121038 MA Case grandMA2 light + ultra-light, without wheels, Scope of delivery: (by Amptown) Built-in keyboard, dust cover, LED desk lamps 121037 MA Case grandMA2 light + ultra-light, with wheels, (by Amptown) 120132 Dust cover grandMA2 light + ultra-light 120122 MA LED desk lamp grandMA2 120121 grandMA2 faderwing 130032 MA NPU (Network Processing Unit)
*US Patent pending
16 grandMA2 ultra-light
The grandMA2 ultra-light features the full network performance of the MA Lighting family • Real-time control for 65,536 para with the best price-performance ratio. All controls are on the same place as with the bigger meters per session in connection with consoles. MA NPU (up to 256 DMX universes) • 4,096 HTP-/LTP-parameters built-in With its 4,096 parameters and 6 DMX-outputs the grandMA2 ultra-light is the perfect backup solution. It brings all the features of the new ‘series 2’ consoles to smaller shows and budgets • 6 x DMX out and allows intuitive and fast control over all lighting genres as well as an infinit number of • 1 internal TFT wide mode touchscreen presets, cues, pages, sequences and effects. (15.4” WXGA) • 2 external TFT screens can be connected (UXGA, can be touch- screens) • 1 internal command screen – multi-touch (9” SVGA)* • 15 executor faders • 2 Ethercon connectors • 4 USB 2.0 connectors • Motorized monitor wing* • 2 motorized A/B fader 100mm • Individually backlit and individually dimmable, silent keys
Integrated clipboard
Art. No Art. No Dimensions (w x h x d) weight (kg) 120113 MA grandMA2 ultra-light 120113 935 x 240 x 652mm, 36.8 x 8 x 25.7inch 35 120141 MA remote control package 121038 MA Case grandMA2 light + ultra-light, without wheels, Scope of delivery: (by Amptown) Dust cover, LED desk lamps 121037 MA Case grandMA2 light + ultra-light, with wheels, (by Amptown) 120132 Dust cover grandMA2 light + ultra-light 120122 MA LED desk lamp grandMA2 120121 grandMA2 faderwing 130032 MA NPU (Network Processing Unit)
*US Patent pending
17 grandMA2 replay unit
• Real-time control for 65,536 para meters per session in connection with MA NPU (up to 256 DMX universes) • 4,096 HTP/LTP-parameters built-in • 6 x DMX out • 2 external TFT screens can be connected (UXGA, can be touch- screens) • 1 internal command touchscreen (7”) Beside all three grandMA2 lighting consoles there is also a grandMA2 replay unit available. In its • 2 Ethercon connectors 19inch housing it is ready for integration into control room racks and also capable of all functions • 4 USB 2.0 connectors and features of the grandMA2 system. The grandMA2 replay unit is the ideal member of the grandMA family when it comes to archi- • No internal faders or buttons – tectural control or easy to mount backup solutions. It is a very safe playback/master controller easy to protect because it does not have built-in faders or buttons to avoid operating errors. Access is possible via • Numerous remote interfaces touchscreen control or via USB connected mouse and keyboard. A wide range of interfaces assures most flexible use and best performance within an architectural system or any other environment.
Art. No Art. No Dimensions (w x h x d) weight (kg) 120115 grandMA2 replay unit 120115 485 x 126 x 379mm, 19 x 5 x 15inch 10 120141 MA remote control package 130032 MA NPU (Network Processing Unit)
grandMA2 faderwing
• 15 motorized faders The new grandMA2 faderwing gives you the most possible executor faders and buttons. • 15 executor buttons Up to four faderwings can be connected to a • MA-bus link to any console of console – that will be 60 additional motorized the grandMA2 series faders on each page for the actual show. • Up to 4 faderwings can be daisy-chained per console
Art. No Art. No Dimensions (w x h x d) weight (kg) 120121 grandMA2 faderwing 120121 425 x 162 x 367mm, 16.7 x 6.4 x 14.4inch 8 121036 Flightcase for grandMA2 faderwing 120133 Dust cover grandMA2 faderwing
18 grandMA2 onPC
MA Lighting’s newly developed grandMA2 onPC • Comprehensive and powerful soft- software is the perfect solution for offline pro- ware-tool for all standard computers gramming – bringing the broad functionality of a • Supports all functions of the grandMA2 grandMA2 console to every Windows® compatible consoles with authentic look and feel computer. • Ideally suitable as live show controller With its comprehensive possibilities grandMA2 onPC or backup system in connection with is ideally suited as backup solution in an MA net- the MA NPU (Network Processing work, can be used as offline pre-programming solution or can be further extended to a complete Unit), MA 2Port Node onPC/onPC PRO design studio by connecting to grandMA 3D. or the MA NSP • Communicates via MA-Net2 over Additionally grandMA2 onPC can be linked via Ethernet to any grandMA2 console or the grand- Ethernet with grandMA2 consoles in MA2 replay unit in a multi-user network system. This means that grandMA2 onPC can read the a multi-user system if required shows of the consoles and enables the user to easily archive the files. Finally grandMA2 onPC offers a convenient way to update your MA equipment. • grandMA2 onPC can be used as user- friendly designer remote control for The grandMA2 onPC software can be downloaded free of charge. all grandMA2 consoles For downloading, please visit our MA Lighting website: www.malighting.com • Expandable to a complete design studio by connecting to grandMA 3D
Art. No grandMA2 onPC 130172 MA 2Port Node onPC PRO, 1,024 parameters, Rigging-Box “EU version”, 2x DMX out 130192 MA 2Port Node onPC, 512 parameters, Rigging-Box “EU version”, 2x DMX out
grandMA2 remote
All important functions of the grandMA2 including changes to the patching • Convenient remote control for all and the chat window can be controlled by grandMA2 remote. important functions of the grandMA2 This powerful remote control can also be used in connection with a grandMA2 range onPC. As an integrated part of the MA system grandMA2 remote can • High distances and safe use with all display intensities and positions or attributes of any fixture in real-time. All grandMA2 consoles members of the grandMA2 family support the use of grandMA2 remote. It can be connected with every single console or a grandMA2 station in a • grandMA2 remote is available free of multi-user system using the standard WLAN environment. charge. Further information at www.malighting.com grandMA2 remote runs on iPod® touch and iPhone®. The MA remote control package comprising Apple iPod® touch and Lancom Access Point is optionally available.
Art. No grandMA2 remote 120141 MA remote control package
19 grandMA 3D
• Real-time 3D visualisation of all important functions and effects of luminaires, moving lights & LEDs • Bi-directional exchange of data with the grandMA consoles of all series – using the same setup • Live and blind programming • Follow mode for live-positioning of fixtures from the 3D to the console or vice versa • Import of 3ds-files • Multiple cameras are available that can be selected re-angled or repositioned during visualisation • Multiple windows for visualisation of same scenarios in different viewing MA Lighting’s ‘free’ visualiser and pre-programming studio – the PC software grandMA 3D – is angles at the same time a unique user interface for the visualisation as well as the design of three-dimensional stage • Pre-programming of a show just with layouts in conjunction with any grandMA2/grandMA console or grandMA onPC. grandMA onPC and grandMA 3D grandMA 3D allows a straight forward design and set up of any custom stage or scenery layout • Precise and realistic reproduction of with its 2D drawing facilities and a library of basic graphical elements. Multiple windows both shadows & colour beams in realtime in 2D or 3D view with any camera angle can be opened at the same time and will be updated live. All the stage elements can be positioned in x/y/z directions and can also be rotated around the various axes. Custom textures for the surface of these elements can be imported from any bitmap file or may be chosen from the built in library. Also video files in AVI format can be used as a texture and be controlled from any grandMA console. Via DMX controlled position and rotational parameters for objects and cameras within 3D, any stage equipment can be moved within the scenery by the connected grandMA.
The grandMA 3D application runs as an independent station on an external PC in any grandMA multi-user network.
Most of the functions of the installed lights are remotely controlled by grandMA and can be programmed in live and blind. The follow mode can be used in grandMA 3D or in the grandMA stage view, a built in wireframe visualiser. This can save a lot of time and work within the pre- programming of complex shows or even when using moving lights as real follow spots.
With grandMA 3D MA Lighting sets a new standard in pre-programming and visualisation and adds another unmatched advantage to its complete system solutions. The software automatically takes over all relevant showfile information from the setup and displays what is needed. Even better the 3D environment is stored in the same showfile. It does not matter where you are and what type of console you are using or what equipment is there – you always have the full showfile with you!
The grandMA onPC software can be downloaded free of charge at: www.malighting.com.
20 © Jan Braun
Drums & Percussion 2010, Paderborn, Germany grandMA ultra-light
• Real-time control for up to 64 DMX The grandMA ultra-light comes with one colour universes/16,384 parameters touchscreen display, one external display, ten (Expansion Mode) manual faders, 30+20 physical playback buttons (on 128 pages). • Extensive networking functionality incl. multi-user, backup, parameter Furthermore the grandMA ultra-light offers 2,048 expansion, etc. DMX parameters, free visualisation software, sup- • 2,048 HTP-/LTP-parameters in port for up to six remotes including DMX universe stand-alone mode expansion with up to 16,384 parameters (32,768 • 1 internal, high-resolution TFT-colour DMX channels or 64 DMX universes) via MA NSP touchscreen (Network Signal Processor). The grandMA ultra-light brings all the user programmability of a top of the line console to some of the smallest shows. • 1 external SVGA connector High-end features such as multi-user programming and backup ability are also included with • 10 faders, 30+20 executor buttons the grandMA ultra-light, making it the perfect console for professional programmers working on (on 128 pages) smaller or budget constrained productions or a smaller console as part of a larger system.
Art. No Art. No Dimensions (w x h x d) weight (kg) 120303 grandMA ultra-light 120303 635 x 157 x 490mm, 25 x 6.2 x 19.3inch 12.9 120141 MA remote control package 130101 MA NSP (Network Signal Processor),110V – 240V Scope of delivery: MA LED desk lamp, dust cover, power cable, manual, 120316 Dust cover grandMA ultra-light grandMA – the DVD 120341 MA LED desk lamp grandMA micro, pico, ultra-light 121021 Flightcase grandMA ultra-light
grandMA micro
• Real-time control for up to The grandMA micro comes with one colour touchscreen dis- 1,024 parameters play, ten manual faders, 10+20 physical playback buttons (on 128 pages). 1,024 DMX parameters, free visualisation • Showfile-compatibility within the software and support for one remote makes the grandMA grandMA range micro the perfect introductory console. • Can be connected to grandMA remote, grandMA 3D and MA VPU However, even though it does not support network function- • 1 internal, high resolution TFT-colour alities such as multi-user, parameter expansion or tracking touchscreen backup, its tiny footprint and highly competitive price tag allows for grandMA control in environments not normally • 10 faders, 10+20 executor buttons associated with top of the line control systems. (on 128 pages)
Art. No Art. No Dimensions (w x h x d) weight (kg) 120304 grandMA micro 120304 480 x 150 x 435mm, 18.9 x 5.9 x 17.1inch 8.1 120141 MA remote control package 120502 Trackball Scope of delivery: MA LED desk lamp, dust cover, power cable, manual, 121022 Flightcase grandMA micro + pico grandMA – the DVD 120341 MA LED desk lamp grandMA micro, pico, ultra-light 120325 Dust cover grandMA micro + pico
22 grandMA pico
The grandMA pico is identical to the grandMA micro. Besides • Real-time control for up to with five Playback faders, it is equipped with many essential 1,024 parameters command buttons especially needed in the theatre style of • Showfile-compatibility within the programming. grandMA range So it is also the smallest console in the range. One colour touch screen display, five manual faders, five physical play- • Can be connected to grandMA remote, back buttons (on 128 pages), 1,024 DMX parameters, free grandMA 3D and MA VPU visualisation software and support for one grandMA remote • 1 internal, high resolution TFT-colour make the grandMA pico the perfect introductory console for smaller theatres. It is optimal for all touchscreen kinds of projects that do not need networking but a professional control. • 5 faders, all important command buttons
Art. No Art. No Dimensions (w x h x d) weight (kg) 120309 grandMA pico 120309 480 x 150 x 435mm, 18.9 x 5.9 x 17.1inch 8.1 120141 MA remote control package 120502 Trackball Scope of delivery: Dust Cover, LED- Desk lamp, grandMA – the DVD, 120325 Dust cover grandMA micro + pico power cable and manual 120341 MA LED desk lamp grandMA micro, pico, ultra-light 121022 Flightcase grandMA micro + pico grandMA remote
The solution of using a pocket PC or an iPod® touch/iPhone® con- • Convenient remote control for the nected across a network together with the grandMA console now grandMA range offers several new operating possibilities. All important functions of • Bi-directional communication via the grandMA plus changes to the patching and the chat window can wireless LAN be accessed via the remote control. • Long distances and safe use with all The grandMA remote can also be easily used with grandMA onPC. grandMA consoles The bi-directional communication between grandMA and the remote • Up to 6 remote control units can be control makes it possible to show intensities and positions or attributes of moving lights in used with each console or station real-time. The grandMA remote software becomes a practical remote display. Depending on the • grandMA remote is available free of environment, distances from 60 up to 300 metres can be covered. charge. Further information at www.malighting.com grandMA remote runs on iPod® touch and iPhone®. The MA remote control package comprising Apple iPod® touch and Lancom Access Point is optionally available.
Art. No grandMA remote 120141 MA remote control package
23 MA System
Although grandMA2 and grandMA are two different series with dedicated software and showfile, they are compatible and all inter connectable.
System Overview – grandMA ‘series 1’ and grandMA2 in one system
MA-Net
Mixed grandMA and grandMA2 systems • Variety of console set-ups incl. multi-user and backup- • Data distribution via MA 2Port Nodes scenarios – grandMA2 consoles in ‘series 1’-mode • Network protocol: MA-Net • Parameter expansion via MA NSP • Smart integration of grandMA 3D, MA VPU and dimMA / dimMA compact
Benefit from MA Lighting’s System solution with…
Powerful performance Easy access and convenient all-system control • Real-time and synchronous system-output for up to • Complete integration of all MA System components (like 65,536 parameters MA VPU, MA NPU, Dimmers, grandMA2 replay unit etc.). All are accessible and configurable via the grandMA2 console. • Continuous software development • Any MA control solution (grandMA2 consoles, grandMA2 replay • Innovative and future-proof hardware unit and grandMA2 onPC) can host the whole system. • One established software across the whole system.
24 System Overview – grandMA2
New grandMA2 network architecture • Variety of console set-ups incl. multi-user and backup- • Network protocol: MA-Net2 scenarios • Smart and full compatibility of grandMA 3D, MA VPU • Parameter expansion via MA NPU (Network Processing Units) and dimMA / dimMA compact • Data distribution via MA 2Port Nodes and MA NSP as 4Port Nodes in sniffer mode
Advanced security and highest reliability Scalability and high flexibility • Multiple backup scenarios • Multiple interfaces available for any input and output configuration. • Detailed feedback information and system monitoring. • Modular system that is easy to expand and easy to update. • Multi-user functionality
25 Lightcommander II 48/6 and 24/6
• Robust steel-housing with solid wooden side profiles • Channel doubling in wide mode • Live and blind mode for programming and modifying • Master-Slave mode and MIDI • Sequences can be recalled via X-Fader with complete graphic presentation • Storing of programmes on RAM card Lightcommander II 48/6 • Softpatch with 255 DMX channels • Chart flow of programmes with free eligible times • Learn Speed button to tap-in the chaser speed directly
Lightcommander II 24/6
When considering control for modern lighting systems you may think that many consoles look similar to each other. Single channel preset-faders, memory faders, page switches, chaser- and master section (often with LC-Displays) and then several special functions.
Only a closer look at the Lightcommander clearly points out, why this MA Lighting desk is one of the best-selling lighting consoles in its class worldwide. Its scope of helpful detailed solutions as well its intuitive logical way of operating have maintained the console’s popularity.
Features of the MA Lightcommander II 24/6 and 48/6 : • solid, robust and reliable • easy to understand • fast and precise to operate • flexible operating structure
Art. No Art. No Dimensions (w x h x d) weight (kg) 120202 Lightcommander II 48/6 120202 1190 x 135 x 620mm, 46.9 x 5.3 x 24.4inch 24 120201 Lightcommander II 24/6 120201 740 x 135 x 620mm, 29.1 x 5.3 x 24.4inch 16 120341 MA LED desk lamp grandMA micro, pico, ultra-light 121002 Flightcase LC II 48/6 Scope of delivery: Keyswitch, desk lamp, connection cable, dust cover, manual 121001 Flightcase LC II 24/6 120603 Memory RAM-Card 128kByte 120501 Memory RAM-Card 256kByte 129924 Dust cover LC II 48/6 129923 Dust cover LC II 24/6
26 Lightcommander 12/2 Desk- and 19“-Rack Version
• Guidance through the menu via LC-display • Channel doubling in wide mode • Live and blind mode for programming and modifying • Master-Slave mode and MIDI • Sound to Light control with memories and chaser Lightcommander 12/2 Pultversion • Storing on RAM card • Softpatch with 99 DMX channels • Chart flow of programmes with freely eligible times • Learn Speed button to tap-in the chaser speed directly
Lightcommander 12/2 19“-Version
The great popularity of the Lightcommander consoles is conclusive proof of the outstanding quality of MA Lighting´s operating philosophy as well as for the whole product concept. Especially when working with only a small number of channels the creativity of the designer and the flexibility of the equipment are of paramount importance. The strongest point of the Lightcommander is its versatility. Due to its extensive special features the Lightcommander is not only used in discotheques, for Live-shows, but also in theatres and for interior lighting. The Lightcommander has got all functions that the user requires when working with a MA Lighting control desk:
• very user-friendly • extensive special functions • built-in LC-display for the documentation of current working • steps • excellent quality • best support and fastest service
Art. No Art. No Dimensions (w x h x d) weight (kg) 120204 Lightcommander 12/2 (desk version) 120204 530 x 90 x 340mm, 20.9 x 3.5 x 13.4inch 5.6 120203 Lightcommander 12/2 (rack version) 120203 450 x 90 x 310mm, 17.7 x 3.5 x 12.2inch 5.3 120341 MA LED desk lamp grandMA micro, pico, ultra-light 120603 Memory RAM-Card 128kByte Scope of delivery: Connection cable, manual 120501 Memory RAM-Card 256kByte 129925 Dust cover 121006 Flightcase (desk version)
27 Video
28 German Pop Idol 2009, Cologne, Germany
29 MA VPU (Video Processing Unit)
• Timesaving – thanks to familiar Would you like to use video technology as a new or additional design element for your lighting operation and easy access show? And do you like to control it as fast, smoothly and easily as possible? Just like any other lighting fixture? • Plug & play for instant show start • Best hardware components for If you already know the grandMA System there is almost nothing new you have to learn. The outstanding performance and whole operation relies on the well established MA philosophy and is highly intuitive. Even if you rock-solid reliability have never used video before you will instantly feel at home with the MA VPU. • Efficient backup solution Via four DVI-out connectors (MA VPU pro) you can control four individual outputs with one • Fast and simple programming via any MA VPU. Thanks to the power of the MA VPU you can display all your videos also in Full-HD grandMA2 and grandMA ‘series 1’ (1,080p) or HD (720p in case of the MA VPU basic). Furthermore the internal output synchron console isation of the MA-Net2/MA-Net ensures the highest frame and DMX synchronicity. • 2 versions to suit all needs: To scale your video to any size desired by your own imagination just use the valuable horizontal MA VPU plus and basic and vertical softedge blending, the keystone correction and enjoy expressive show designs you • Up to 4 individual Full-HD (1,080p) have never seen before. Size doesn’t matter anymore. outputs More than that the MA VPU offers a convenient 3D Keystoning functionality and enables you to • Professional effects + write your own fit your content to any 3D objects irrespective of size and shape. If there is a video running too effects and import them easily fast or too slow, just use frame interpolation and smooth speed control to adjust the playback. • 17GB content library pre-installed Beyond that there is a myriad of functions, features and effects available like frame blending, • Advanced pixelmapping functionality colour booster, dynamic colour key, contrast, brightness, hue, saturation as well as blur, sepia, • Live Video-In black/white, ocean and invert. All of them can be easily accessed and are self-explanatory in their use. Combinations of video and still images can be mixed and controlled, and JPEG images • Sound playback and standard windows bitmap images such as *.bmp as well as *.gif are supported. • Convenient 3D keystoning & softedging • Up to 32 3D-video-layers • Blind programming support • Highest frame and DMX synchronicity
• Convenient setup, preview and system • Rock solid and easy to use: • Powerful video control: monitoring via 7” touchscreen MA VPU basic MA VPU plus
30 The MA VPU can also follow the blind programming of the grandMA console.
With up to 32 3D-video-layers (8 for the MA VPU basic) the MA VPU can help you realise additional creativity.
Based on the rock solid technology of MA Lighting, the MA VPU offer extreme reliability, are optimized for transportation, longevity and on the road use, as well as for fixed installations like theatres, TV studios etc.
Finally each MA VPU comes with a pre-installed content library comprising more than 17GB of professional pre-installed HD and SD video content.
Two different versions of the MA VPU are available to suit all needs: MA VPU plus and MA VPU basic.
The MA VPU pro will be available soon.
The flagship: MA VPU pro
31 Hard facts Data that count
Codecs
1 The MA VPU uses the MPEG-1/2 2 (ISO/IEC 13818-part x) standard. As MA Lighting uses Microsoft® DirectShow to render the textures (pictures) it will need a codec to be able to read these pictures. This codec is the MPEG2 one from Main- Concept. 3 4 5 6 7
1) EDID ON 4) Ethernet 7) eSATA 2) DVI Out 5) USB 3) Power In/ Power Thru 6) Sound Out
MA VPU pro (available soon) MA VPU plus MA VPU basic Full-HD (1,080p) Full-HD (1,080p) HD (720p) 4 x DVI-/out 2 x DVI-/out 2 x DVI-/out 2 x HD-SDI-in ./. ./. 7”-Display 7”-Display ./. Preview-out ./. ./. Up to 32 3D-video-layers* Up to 32 3D-video-layers* Up to 32 3D-video-layers* 256GB SSD (robust and reliable 256GB SSD (robust and reliable 128GB SSD (robust and reliable solid-state-disc) solid-state-disc) solid-state-disc) Powercon and Ethercon connectors Powercon and Ethercon connectors Powercon and Ethercon connectors Powercon thru Powercon thru Powercon thru Further connectivity on request Further connectivity on request Further connectivity on request >17GB pre-installed content >17GB pre-installed content >17GB pre-installed content Video format: MPEG2 Video format: MPEG2 Video format: MPEG2 Image format: *.jpg; *.bmp; *.gif; *.png; etc. Image format: *.jpg; *.bmp; *.gif; *.png; etc. Image format: *.jpg; *.bmp; *.gif; *.png; etc. Dimensions: 485 x 211 x 627mm; Dimensions: 485 x 211 x 627mm; Dimensions: 485 x 211 x 627mm; Weight: 15 kg Weight: 15 kg Weight: 15 kg Art. No 120145 Art. No 120146 Art. No 120147
*Up to 32 3D-video-layers in total; up to 4 3D-video-layers in HD.
32 Get in touch Simple setup and monitoring via the 7“ touchscreen
Visual Output Control System Monitoring & Diagnostic
The preview screen of the MA VPU plus and MA VPU pro offers a perfect The MA VPU plus and MA VPU pro offer an efficient workload screen. overview of which content is send to each of the four outputs (MA VPU By this users can see the current status of the whole showfile in the pro) or the two outputs (MA VPU plus). network.
Connectivity Overview Priorising Fixtures
Whenever needed the network screen gives a quick overview of all MA Thanks to the smart MA-Net2/MA-Net you can assign each of the components in the network and their current status. This allows you to connected MA VPU to do the output for your screens. If a MA VPU check the installed software versions or monitor whether all components fails it is possible to easily select your backup MA VPU via the MA VPU are up and running. touchscreen and use it instead. If you have no backup MA VPU you can select another MA VPU of your system which you think is not that important and assign it to a more relevant screen. Please also switch video output via a crossbar.
33 Shape your content Valuable features for your show
3D Keystone Correction
Your content is ready, your MA VPU running – This offers infinite creative possibilities: but what about your screen? The MA VPU e.g. projecting the animated surface of offers a professional solution to adjust pro- your choice onto a ball is no problem with jected images and videos to any 3D surface 3D Keystone Correction, and neither is dis- comfortably from the grandMA console. playing a video on a heavily bending or distorted canvas. Whatever the shape or size of the screen Our 3D Keystone Correction function re- – with 3D Keystone Correction you’ll always calculates the image and shows it correctly be on the safe side. aligned to the projection surface, whatever the projector´s position. Additionally, the pro- jection can be scaled across both X- and Y- directions to distribute the content precisely onto the canvas.
Pixel Mapper
Because of the Pixel Mapper there are no limits to using LEDs in your design in every creative LED Video Projection LED way imaginable. With the Pixel Mapper it is possible to display video content on any DMX- Matrix – so you can put your LED-screens, LED-panels, LED-strips etc. everywhere on stage and can control them easily. While video on plasma screens or video walls is caught in a defined ratio, LED fixtures can use all kinds of measurements. The picture can also be aligned on pixels which don’t have fixed aspect ratios.
Similar to the desk fixture types the at- Example of output tributes of the LED panels are defined in text files located in a folder of the MA VPU. LED fixtures can be easily created. The intensity and colour information of each video pixel is translated into DMX values and directly sent from the MA VPU to the LED fixture via Ethernet using Art-Net.
Screenshot of Pixel Mapper
34 MA-Content-Package
• The exclusive MA-Content-Package from showfootage.com – the online contentshop – offers you over 500 free selectable clips. To be precise: from a huge content library of renown designers you can download 320 SD clips, 120 HD720 clips and 100 HD1080 clips.
This makes the MA-Content-Package the ideal way to individually extend the pre-installed content of the MA VPU. The MA-Content-Package saves you over 40 percent discount compared to buying the clips individually. With your order, you receive a voucher code enabling you to download your choice of clips and pics from the Showfootage website www.showfootage.com How it works: Please enter your voucher-code – after your registration under “Ihr Konto” (on the upper side right) – into the designated field. After that you can choose your clips and start downloading them in the desired format. The voucher is valid for one year, and you’ll be constantly updated on the remaining credit!
Art. No 120374 MA-Content-Package
35 Dimming
36 © Adam Houghton
The Lyric Theatre, Johannesburg, South Africa
37 Dimming Solutions
MA Lighting’s dimMA dimming systems can be used together within an Tough and indestructible are two keywords that characterize the MA installation as they have the same dimmercurve and reactiontime. All Digital Dimmer Touring. Dimmer racks with MA dimmer in an Amptown dimmers can be controlled by any DMX source. Due to the idea of net- case are available with two, three or four MA Digital Dimmer units of working the dimMA System for fixed installations will be equipped with different capacities, and are all equipped with an integrated MAJOR power an MA NDP (Network Dimmer Processor) that is able to receive and send distribution (CEE or Powerlock) including all required RCD and main circuit different Ethernet protocols as well as DMX. Therefore the MA NDP will breakers. For the touring version a MAJOR Hotpatch panel complete with reach and provide a new level of control and system integration. As soon a test plug and desk lamps are integrated as standard, dimmers can also as the grandMA console or any other control system is switched off the be built-in to the racks without Hotpatch. Special custom-made dimmer MA NDP can take over control and reacts as the “heart” of the complete racks are also available from MAJOR on request. network. This intelligent functionality in combination with all provided feedback and fault information will give a perfect overview and control of the (complete) installation. Everything can be centrally organized with full control from all parts of the network.
dimMA dimMA compact dimMA compact RCBO
38 Dimmer Rise-Times
Module Module Dimmer Ampere Dimmer Ampere Rise-Time Rise-Time dimMA compact 12 x 3kVA 13 280μs Touring 12 x 2.3kVA 10 280μs dimMA compact/RCBO Touring 12 x 3.7kVA 16 280μs dimMA compact 6 x 5.7kVA 13 280μs Touring 6 x 5.7kVA 400μs 13 400μs dimMA compact/RCBO Touring 12 x 3.7kVA 300μs 16 300μs dimMA 3kVA 13 280μs Touring 12 x 2.3kVA TV3 10 360μs dimMA 3kVA HR 13 400μs (720μs) Wall-mount 3kVA 13 280μs dimMA 5.7kVA 25 400μs (720μs) Wall-mount 3kVA HR 13 400μs dimMA 11.5kVA 50 400μs Wall-mount 5.7kVA 25 400μs
MA Dimmer Technology and how they are built… What’s the best dimming solution? Nowadays thyristor dimmer technology can be found everywhere. The The best dimming solution will be the one that fits the customers important argument for any dimmer and any customer will be the rise requirements as well as the customers needs of technology. In most time with the thyristor technology. It provides an idea of how fast the cases the thyristor technology will be more than good enough. The best “jump” from zero to the actual voltage will be. This jump can cause result for any standard dimming system will be the thyristor technology “lamp noise” – better filtering can lower the noise. The rise time for TV because of its field tested reliability. On the following pages all the and theatre application should be at least 280μs. The MA solution gives dimming solutions MA can offer will be given. All dimming products can you the same rise time across different MA Digital Dimmer modules, so be combined because of the same rise time range for permanent instal- various combinations of different MA Digital Dimmer modules can be lations and touring solutions. All dimmers have the same high quality used together. Please refer for more information to the rise time table filtering and a user friendly interface beginning at the touring dimmers above. with a built-in display and ending at the dimMA System with its unique Just as important as the build quality is that the inbuilt dimmer filters configuration and feedback functionality right onto the screens of the are as quiet as the actual dimmers themselves. It is especially important grandMA consoles. to avoid a constant whir because the filter elements are interacting with each other. MA has set many quality standards and proven how quietly Thyristor dimmers can work in multiple installations.
U 90°
90%
50%
10% t 280μs Forward phase control with rise time of 280 μs Digital Dimmer “Wallmount” Digital Dimmer Touring
39 dimMA Digital dimming system for permanent installations
Key features (mechanical and electrical) • Sturdy dimmer cabinet with a foot- print of only 600 x 600mm for 72 dimmer modules • Easy installation and access to the connectors from the front using a 19’’ swivel frame • Plug-in dimmer modules with three power ratings of 3kVA, 5.7kVA or 11.5kVA Dimmer Crates • Cabinets can be populated with a variety of modules of different types and loads • A power breaker with integrated individual phase fuses and a residual current device for each dimmer rack are fitted as standard
Key features (control) Module rear side • All dimmers are fitted with current sensing and fault feedback functions via Ethernet as standard dimMA – Digital dimming system for permanent installations • Load check, control checking and fault With the innovative digital dimming system dimMA, the well-known reliability of the MA touring indication with LEDs for each dimmer dimmers is also available for permanent installations. circuit The MA installation dimming system uses 19’’ rack cabinets that are made by the renowned manufacturer Rittal and have a foot print of only 0.36 m² so that they can be tightly packed. • Two independent signal inputs via All connections and outgoing lines are located on the inside of the cabinet. A swivel frame Ethernet and/or DMX with individual which operates similar to a huge front door provides easy and convenient access from the front patch and makes unnecessary any additional load terminals or patch fields. Power feed and outgoing • LTP-, HTP- and backup link of the cables can either be routed from the top or the bottom of the cabinet. control input possible • Two separate DMX inputs A + B with Rugged cabinet construction Thru output for additional cabinets The swivel-frame cabinet with its 18 plug-in slots (a maximum of 72 x 3kVA) can be fitted with • Conversion and output of two modules of 4 x 3kVA, 2 x 5.7kVA or 1 x 11.5kVA loads. Each rack can be populated with modules additional DMX lines when of different types. controlled via Ethernet In addition dimmer modules with high rise-time chokes for TV applications are available. Thus the digital dimming system for installations is ready for the future and based on proven and • Second processor as a synchronous rugged technology. backup system available as an option For feeding (TN-S net), there is an integrated three-phase bus-bar system with a load capacity of 400A per phase. Upon request, the cabinets can be equipped with special components such as mains switches, auxiliary contactors, additional, parallel output terminals, or DMX and network distributors.
40 Dimmer modules Module racks The plug-in modules for the dimMA Digital Dimmer system are available All dimmer modules are designed as plug-ins, separate by phase and with load ratings of 4 x 3kVA, 2 x 5.7kVA or 1 x 11.5kVA. The dimmer mounted in 19” racks with separate feeds for three modules at a time. modules are available with rise times from 280µs to 400µs (or 370µs) Each rack (when fully fitted, a maximum of six racks per cabinet is and up to 720µs depending on the load rating. This allows us to of- possible) are equipped with a combined mains fuse and switch and fer the optimal solution for every kind of application while also taking a residual current device (RCD) as standard. (The RCDs per rack are economic aspects into consideration. Each dimmer module features configured so that they are all shut off when tripped, when multicore a separate single-PCB computer with power supply and communicates is used.) with the MA NDP (Network Dimmer Processor) of the cabinet via a Replacing dimmer modules during operation or switching off individual CAN-bus interface. Dimmer modules of the same rating may be freely groups of dimmers is therefore possible and permitted without shutting exchanged; any assigned settings such as dimmer number, dimming off the entire cabinet. curve, non-dimming operation, and special and/or panic functions remain linked to plug-in slot and apply to any new module inserted. If you have any question, please get in touch with our project depart- Each module is cooled with a temperature-controlled fan activated only, ment – they will help you find the optimal dimming solution. if the module is actually in use. This reduces drastically the amount of noise produced by the dimming system because only those components are cooled that need it. Via the MA NDP, each dimmer circuit provides the lighting control system with detailed information about current and voltage, the status of the load connected, and about any faults occurring.
Standard/cabinet versions
Number of Crates Number of Modules Dimmer Circuits Backup MA NDP Nominal Load Mains Feed 6 18 (3 per crate) 72 x 13A optional 72 x 3kVA 230/400V (4 per module) 400A/Phase 6 18 (3 per crate) 36 x 25A optional 36 x 5.7kVA 230/400V (2 per module) 400A/Phase 6 18 (3 per crate) 18 x 50A optional 18 x 11.5kVA 230/400V (1 per module) 400A/Phase
Dimmer Modules
Dimmer Circuits Load Module Rise-Time Module Processor 4 x 13A 3kVA 280μs/400μs 16Bit, CAN-bus Interface, independent power supply 2 x 13A 3kVA 720μs 16Bit, CAN-bus Interface, independent power supply 2 x 25A 5.7kVA 400μs 16Bit, CAN-bus Interface, independent power supply 1 x 25A 5.7kVA 720μs 16Bit, CAN-bus Interface, independent power supply 1 x 50A 11.5kVA 400μs 16Bit, CAN-bus Interface, independent power supply
41 dimMA compact Compact dimmer for permant installations
Key features (mechanical and electrical) • Sturdy dimmer cabinet with a foot- print of only 600 x 600mm for 9 dimmer modules • Screwed-in dimmer modules with two power ratings of 3kVA or 5.7kVA • Cabinets can be populated with a variety of modules of different types and loads • A power breaker with integrated individual phase fuses and a residual current device for each dimmer module are fitted as standard
Key features (control) • All dimmers are fitted with current sensing and fault feedback functions via Ethernet as standard • Load check, control checking and fault indication with LEDs for each dimmer circuit dimMA compact – the easy way of dimming • Two independent signal inputs via With the innovative digital dimming system dimMA compact, the well-known reliability of the Ethernet and/or DMX with individual MA touring dimmers in combination with the outstanding features of the dimMA System is patch available for permanent installations. All features of the dimMA System are the same as for the dimMA compact. It is just called compact due to the fact that the cabinet density increased. • LTP-, HTP- and backup link of the So the conclusion is the module with only 4 units high and 12 channel fitting. This allows 108 control input possible channels in a dimMA cabinet, which is a Rittal rack, and have a foot print of only 0.36m2 so • Two separate DMX inputs A + B with that they can be packed tightly. All connections and outgoing lines are located on the inside Thru output for additional cabinets of the cabinet. A modular connection system of the back side of the modules makes it easy to change modules or get access to the inside terminals and makes unnecessary any additional load • Conversion and output of two terminals or patch fields. Power feed and outgoing cables can either be routed from the top and/ additional DMX lines when or the bottom of the cabinet. controlled via Ethernet • Second processor as a synchronous Rugged cabinet construction backup system available as an option The cabinet can be fitted with 9 modules of 12 channels (a maximum of 108 x 3kVA) or 9 modules of 6 channels (a maximum of 54 x 5.7kVA). Each cabinet can be populated with modules of differ- ent types. In addition switch modules (with relay) that are compatible with phase-cut modules are also available. Thus the digital dimming system for installations is ready for the future and based on proven and rugged technology. For power input (TN-S net), there is an integrated three-phase bus-bar system with a load capacity of 400A per phase. Upon request, the cabinets can be equipped with special components such as mains switches, additional, parallel output terminals and RCD per channel.
42 Dimmer modules Each module is cooled with two temperature-controlled fans activated The plug-in modules for the dimMA digital dimming system are available only if the module is actually in use. This reduces drastically the amount with load ratings of 12 x 3kVA or 6 x 5.7kVA with a rise time of 280µs. of noise produced by the dimming system because only those compo- Each dimmer circuit has high quality thyristors and filter suppression. nents are cooled that need it. Via the MA NDP, each dimmer circuit This allows us to offer the optimal solution for every kind of application provides the lighting control system with detailed information about while also taking economic aspects into consideration. Each dimmer current and voltage, the status of the load connected, and about any module features a separate single-PCB computer with power supply faults occurring. and communicates with the MA NDP (Network Dimmer Processor) of the cabinet via a CAN-bus interface. Dimmer modules of the same rating If you have any question, please get in touch with our project depart- may be freely exchanged; any assigned settings such as dimmer number, ment – they will help you find the optimal dimming solution. dimming curve, non-dimming operation, and special and/or panic func tions remain linked to the plug-in slot location and apply to any new module inserted.
Standard/cabinet versions
Number of Crates Number of Modules Backup MA NDP Nominal Load Mains Feed 9 108 x 13A optional 108 x 3kVA 230/400V, 400A/Phase 9 54 x 25A optional 54 x 5.7kVA 230/400V, 400A/Phase
Dimmer Modules
Dimmer Circuits Load Module Rise-Time Module Processor 12 x 13A 3kVA 280μs 16Bit, CAN-bus Interface, independent power supply 6 x 25A 5.7kVA 280μs 16Bit, CAN-bus Interface, independent power supply
Additional dimMA options, extract (prices on request)
Switch modules (e.g. 12 x 13A, 6 x 25A) RCD modules (single RCD per channel Double pole breaker (dual MCB) per dimmer module (e.g. 4 x 3kVA, 2 x 5.7kVA) Test modules (e.g. 4x 13A, 2 x 13A) Dual power supply with phase lamps Main contactor 250A Clamp options (e.g,16mm2 single clamp, 6mm2 triple-deck clamp, double clamp, spring-type terminal)
43 dimMA compact RCBO The easy way of dimming
Key features (mechanical and electrical) • Sturdy dimmer cabinet with a footprint of only 600 x 600mm for 96 dimmer channels • Single RCBO per channel • Screwed-in dimmer modules with two power ratings of 3kVA or 5.7kVA • Cabinets can be populated with a variety of modules of different types and loads • A power breaker with integrated individual phase fuses for each dimmer module is fitted in an additional power distribution module • Power distribution with D-02-switch- disconnector for each module
Key features (control) • All dimmers are fitted with current sensing and fault feedback functions • Load check, control checking and fault indication with LEDs for each dimmer circuit • Two independent signal inputs via Ethernet and/or DMX with individual patch
• LTP-, HTP- and backup link of the dimMA compact RCBO – the easy way of dimming control input possible With the innovative digital dimming systems dimMA and dimMA compact, MA Lighting combined • Two separate DMX inputs A + B with the well-known reliability of their touring dimmers with both the MA-Net2/MA-Net network Thru output for additional cabinets architecture and outstanding features for permanent installations. With the dimMA compact RCBO, every channel is protected with single RCBO (combination of • Conversion and output of two DMX RCD and MCB), to reach a new level of safety and to ensure the operation of the remaining lines when controlled via Ethernet channels even if a single channel causes an earth leakage or over-current. • Second processor as a synchronous Every dimMA compact RCBO module comes in a solid 4 units housing and single RCBO per channel. backup system available This allows up to 96 channels in a cabinet, which is a Rittal rack, and have a foot print of only 0.36 m² so that they can be packed tightly. dimMA compact RCBO offers the same features as the well known dimMA/dimMA compact system and provides the same easy accessibility of all load terminals and connections from the front side of the cabinet. Due to this it is easy to install. The modular connection system on the back side of the modules makes it easy to change modules and makes any additional load terminals or patch fields unnecessary. All connections and outgoing lines are located on the inside of the cabinet. Power feed and outgoing cables can either be routed from the top and/or the bottom of the cabinet.
44 Rugged cabinet construction while also taking economic aspects into consideration. Each dimmer The cabinet can be fitted with 8 modules of 12 channels (a maximum module features a separate single-PCB computer with power supply of 96 x 3kVA) or 8 modules of 6 channels (a maximum of 48 x 5.7kVA). and communicates with the MA NDP (Network Dimmer Processor) of the Each module is equipped with single RCBO (C13/30mA) per channel. cabinet via a CAN-bus interface. Dimmer modules of the same rating A mixed assembly is also possible. Every cabinet is equipped with may be freely exchanged; any assigned settings such as dimmer number, one centralised power distribution module which contains the mains dimming curve, non-dimming operation and special and/or panic func switches for each dimmer module. In addition switch modules (with- tions remain linked to the plug-in slot location and apply to any new out semiconductors) that are compatible with phase-cut modules are module inserted. available. Thus the digital dimming system for installations is ready for Each module is cooled with two temperature-controlled fans activat- the future and based on proven and rugged technology. ed only if the module is actually in use. This reduces drastically the For power input (TN-S net), there is an integrated three-phase screw amount of noise produced by the dimming system because only those type terminal. Upon request, the cabinets can be equipped with special components are cooled that need it. Via the MA NDP, each dimmer components such as main contactor and additional, parallel output circuit provides the lighting control system with detailed information terminals. about current and voltage, the status of the load connected, and about any faults occurring. Dimmer modules The plug-in modules for the dimMA compact RCBO digital dimming If you have any question, please get in touch with our project depart- system are available with load ratings of 12 x 3kVA or 6 x 5.7kVA with ment – they will help you find the optimal dimming solution. a rise time of 280µs. Each dimmer circuit has high quality thyristors and filter suppression. This allows us to offer the optimal solution for every kind of application
Standard/cabinet versions dimMA compact RCBO
Number of Crates Number of Modules Backup MA NDP Nominal Load Mains Feed 8 96 x 13A optional 96 x 3kVA 230/400V, 230A/Phase 8 48 x 25A optional 48 x 5.7kVA 230/400V, 230A/Phase
Dimmer Modules
Dimmer Circuits Load Module Rise-Time Module Processor 12 x 13A 3kVA 280μs 16Bit, CAN-bus Interface, independent power supply 6 x 25A 5.7kVA 280μs 16Bit, CAN-bus Interface, independent power supply
Additional dimMA compact options (prices on request)
Switch modules (e.g. 12 x 13A, 6 x 25A) Main contactor 230A Clamp options (e.g.16mm2 single clamp, 6mm2 triple-deck clamp, double clamp, spring-type terminal)
45 MA NDP (Network Dimmer Processor)
• Control via DMX512-A and/or Ethernet (MA-Net2/MA-Net or Art-Net protocol) with two control inputs (“control slots”) which can be combined per HTP, LTP, A over B, A-only or B-only • Dimmer resolution of 8 or 16 bits, additional timing channel per dimmer as an option • Automatic patch for the entire The MA NDP (Network Dimmer Processor) is the heart of the dimMA dimming system. cabinet; starting address for both The MA NDP is the active link between the different Ethernet signal standards, the dimMA digital control inputs can be set individually dimming system and the DMX world. In addition to controlling and supervising up to144 dimmer circuits, up to 1,024 channels can also be converted from the respective Ethernet protocol and • Individual patch for each of the two outputted to two electrically isolated DMX universes. Two separate DMX lines are also available control inputs per individual dimmer as inputs in order to integrate those control systems into the MA network which were previously • Setting the minimum and maximum not included in the signalling network. In this way, the number and length of cables can be voltage per dimmer (in volts) reduced and greater distances can be bridged. Just like the consoles of grandMA range, the MA NDP (Network Dimmer Processor) supports various protocols for transmitting DMX data via • Automatic preheat feature adjustable Ethernet as a standard feature and therefore does not depend on the consoles of any manufacturer per dimmer (switches off, if control in particular. signal is >0%) • Response time adjustable per dimmer The MA NDP uses a CAN-bus interface to communicate with the individual dimmer modules. This (in milliseconds) interface can also be used to synchronise the MA NDP with a second, optional MA NDP used as a backup system. For configuring and operating the MA NDP “on site”, each unit has a two-line, • Backup cue in case of control system backlit LC display, four menu keys and an encoder. When connected to an external keyboard, failure a mouse and a VGA monitor, configuring the MA NDP is especially easy and convenient to do. • Two lighting cues (Panic and Control) Eight dry contacts make it possible to activate functions such as backup/emergency cues by can be activated independent from the means of any external buttons or switches. Two of these analogue inputs are used as a panic dimmer processor; special/emergency function to activate two cues directly in the dimmer modules, i.e. independent from the MA NDP. lighting systems in accordance with The housing which is constructed from sheet metal is one unit high and designed for rack VDE 0108 can be easily and economi- mounting; it comes complete with a built-in, three-phase power supply. All signal connectors are cally realised pluggable and routed within the dimmer cabinet. • Six dry-contact inputs for activating backup cues, direct or binary coded for 64 cues • Cue memory for 1,000 Cues (backup cues) with running time, numbered by sequence and cue number • Eight pre-defined, further to be configured dimmer curves, selectable per dimmer (can be edited using a grandMA console or grandMA onPC software)
46 Isolated input
Fault messages and feedback (extract):
The dimMA digital dimming system is equipped with a comprehensive monitoring and diagnostic system which detects the operational status of each individual dimmer. Detected faults and messages show up in plain language on the MA NDP display and fault memory. The following faults are detected and reported:
• Excessive temperature per module (average temperature of All faults are recorded and, together with the date and time of the fault, cabinet will be displayed in console) are entered into the fault list, which can be retrieved on the MA NDP itself, on a grandMA console or with a PC using Telnet or grandMA • Overload of the dimmer (load rating of the dimmer exceeded) onPC. All dimmer cabinets can also be remotely configured via a grandMA • Loss of phase on feed supply console or a PC. A PC can be used to update the MA NDP software. Such an update is also • Over-current on neutral connection (with optional sensor) possible by replacing the CF-Flashcard on the MA NDP. The software of • Excess direct current on dimmer output the individual dimmer modules is updated via the MA NDP; there is no need to remove or open the modules. • Load failure (no load connected) • Failure of one or both control signals (DMX or Ethernet) • RCD trip per rack • Trip of the dimmer’s automatic circuit breaker • Failure of a dimmer module (module feed or electronics defective)
Art. No 140131 MA NDP (Network Dimmer Processor)
47 MA Digital Dimmer Touring and Wallmount
With their digital dimmers MA Lighting have a strong history especially • Robust, coated 19“ sheet steel housing including for the touring business. This is mainly based on the proven reliability of interior chassis these “busy workhorses” sized 19”/3 units. MA Lighting is also offering • Special versions with single or two-pole breaker, their first-class dimmer technology in a robust housing to be able to optionally also available with RCD protection switch mount it on the wall (Wall Mount) for fixed installations. With special • Two temperature controlled fans rails this digital dimmer WM can also be built-in a 19” rack. • Automatic turn off and over-temperature warning The MA Digital Dimmers are controlled by high power microcontrollers • Phase angle control by thyristors and wide spectrum with “time-processing-units”, for digital adjusting of the firing time of filter suppression the phase control. All data and stored memories are filed in the EPROM. • All inputs and outputs have high frequency interference It is possible to change the operating system via EPROM for later soft- suppression ware upgrades. DMX control with single channel or sequence patch, • Full load and short circuit safe dimmer with magnetic hold dimmer output in case of DMX loss, memories of output voltages circuit breaker (C-profile) which can be combined with the DMX loss function and Master/Slave • All operating functions via menu and graphic ganging of additional dimmerpacks are only a few highlights of these LC-display remarkable products. • Preheat and output limit fully adjustable options for each channel • 3 flexible and fully editable dimmer curves, plus a switched function • Internal memory of 12 scenes and one chaser with separate fade times • Block or single channel patch for DMX • Individual versions according to customers´ specifications available on request; e.g. with earth leak protection switch
Display The large graphic display on the MA Digital Dimmer lists all important status values and allows access to numerous functions. Errors like broken lamps, overvoltage or overheating are also further displayed by LEDs and a buzzer.
48 Fault clearance and Savety
Phase Angle Control MA Lighting Dimmers use thyristors running under phase-angle control. The dimmer’s power components and circuit breakers are tuned so that the internal electronics are safe from short circuits. In addition, the power spike associated with turning on halogen lamps will not trigger the dimmer’s circuit breakers.
Electronic Control Digital control throughout the dimmer ensures error-free operation. Changes in the internal temperature of the dimmer, caused by differing load situations, will not influence the dimming characteristics of the dimmer. The dimmer will notify the operator before it overheats, e.g. when a fan is blocked, and will ultimately shut down if ignored. The input voltage is closely monitored and the dimmer will automatically shutdown in case of the wrong polarity or a missing neutral – protecting equipment from over voltage.
Dimmer Noise Special-filtering ring-core chokes and the cleverly designed housing of the new “WM” digital dimmer with interior chassis, ensures that “dimmer buzz” is kept to an absolute minimum. From a distance of one meter, sound from the dimmer measures only 46dB meaning that it can be installed virtually anywhere.
Heat Control When electronic waves are dampened, magnetic fields and heat are produced. At a duty cycle of 12 x 2.3kVA inside a three unit housing, the loss of 1.5% corresponds to a medium-sized heating coil. In the MA Digital Dimmer, the build up of heat has been reduced considerably by using special coil core materials. The remaining heat is dissipated by using powerful, temperature-con- trolled fans. It is because of these features that the MA Digital Dimmer is rated for a 100% duty cycle.
U 90°
Interference suppression 90% Phase-angle control produces harmonic waves that can cause distortion in other electronic equipment and that are highly undesirable in audio 50% applications. The specially-developed filters of the MA Digital Dimmer not only suppress these frequencies in the range required by law, but 10% also suppress frequencies in the audio range up to 20 kHz. Although rise times are not the only way to measure interference suppression, the MA Digital Dimmer qualifies with its 280μs rise time (10-90% at full load) 280μs as one of the market leaders.
49 MA Digital Dimmer Wallmount
• Two different versions with permanent load of 3kVA or 5.7kVA • A partially casted split-ring choke make it even quiter for the „touring“ version • 280µs rise time (3kVA), 400µs rise time (5.7kVA) – between 10% and 90% at a phase angle of 90°; special ring core throttle • Dimmer with special filter technology and interference suppression especially for TV business available as 3kVA version; rise time: 400µs • Phase control with display for glow lamps • Special versions with two-way breaker and special wiring for use with delta network (without RCD) – e.g. on cruise ships • 8 contact inputs for the recall of internal stored looks; 8 outputs with LED feedback
• Robust coated 19“ 14 Units steel housing for mounting on walls MA Digital Dimmer ‘WM’ 12 x 3kVA • With special rails the dimmer can A wall-mountable digital dimmer with 12 single dimmers 3kVA without RCD. be built-in a 19“ rack Rise time 280µs between 10% and 90% at a phase angle of 90°; ring core suppression. Large graphic display listing status values and special functions as well as phase control display. • Optional cable input access, either Further versions with RCD (63A/30mA), mains breaker with earth leak protection or real two- on top and/or bottom way breaker and special wiring for cruise ships (delta-grid) also available. • Socapex or Harting output possible MA Digital Dimmer ‘WM’ 6 x 5.7kVA Wall-mountable digital dimmer with 6 single dimmers 5.7kVA without RCD. Rise time 400µs between 10% and 90% at a phase angle of 90°; ring core suppression. Large graphic display listing status values and special functions as well as phase control display. Further versions with RCD (63A/30mA), mains breaker with earth leak protection or real two- way breaker and special wiring for cruise ships (delta-grid) also available.
50 MA Digital Dimmer ‘WM’ 12 x 3kVA TV3 Wall-mountable digital dimmer with 12 single dimmers 3kVA with special filter technology and a rise time of 400µs between 10% and 90% at a phase angle of 90°. Designed especially for TV studios, excellent interference suppression can be guaranteed. Large graphic display listing status values and special functions as well as phase control display. Further versions with RCD (63A/30mA), mains breaker with earth leak protection or real two-way breaker and special wiring for cruise ships (delta-grid) also available.
Inside view
Art. No Art. No Dimensions (w x h x d) weight (kg) 140521 MA Digital Dimmer WM 12 x 3kVA 140521 440 x 610 x 154mm, 17.3 x 24 x 6inch* 33.5 140522 MA Digital Dimmer WM 12 x 3kVA with RCD 140522 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140525 MA Digital Dimmer WM 12 x 3kVA Delta 140525 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140527 MA Digital Dimmer WM 12 x 3kVA TV3 140527 440 x 610 x 154mm, 17.3 x 24 x 6inch* 37.5 140528 MA Digital Dimmer WM 12 x 3kVA neutral-disconnect 140528 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140529 MA Digital Dimmer WM 12 x 3kVA double-clamp 140529 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140530 MA Digital Dimmer WM 12 x 3kVA with 6mm² clamps 140530 440 x 610 x 154mm, 17.3 x 24 x 6inch* 33.5 140532 MA Digital Dimmer WM 12 x 3kVA, RCD per channel 140532 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140523 MA Digital Dimmer WM 6 x 5.7kVA 140523 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0 140524 MA Digital Dimmer WM 6 x 5.7kVA with RCD 140524 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.5 140526 MA Digital Dimmer WM 6 x 5.7kVA Delta 140526 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.5 140581 MA Digital Dimmer WM 6 x 5.7kVA with RCD per channel 140581 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.5 140582 MA Digital Dimmer WM 6 x 5.7kVA neutral-disconnect 140582 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.5 140583 MA Digital Dimmer WM 6 x 5.7kVA double-clamp 140583 440 x 610 x 154mm, 17.3 x 24 x 6inch* 34.0
* Dimensions without guide rail. With guide rail: 500 x 610 x 154.5mm
51 MA Digital Dimmer Touring-Packs
• Rock solid 19” steel housing with Highest availability and practical relevance of their digital touring dimmer as well known and internal frame reliabale “work horses“ made MA Lighting technology famous around the world. • Three available power ranges with Controlled and monitored by a 32 Bit time processor unit which can store cue memorys and all 2.3kVA 3.7kVA and 5.7kVA settings in a EPROM ensures an error free operation. Upgrading the dimmer working software • Special noise filtering and rise time is no problem by using an EPROM. DMX control with a single patch or sequenze patch, Master/ for TV applications available Slave operation and hold output by dmx error are just a few more highlights. • Master/Slave mode for simultanously programmstart with MIDI • Input via DMX512
MA Digital Dimmer 12 x 2.3kVA A rack-mountable digital dimmer unit in a 19“ 3U housing with 12 single dimmers 2300VA. The rack is controlled by a high power micro controller with ‘time processing-unit’ – digital adjusting of the ignition time of the phase control. All data and stored memories are filed in the EPROM. It is possible to change the operating system via EPROM for later software upgrades. DMX control with single channel or sequence patch and hold or memory of the dimmer output data can be selected in advanced in the event of DMX breakdown. Master/Slave connection with other dimmers (e.g. in a dimmer rack) is possible. Delivery includes mounted supply H07RN-F 5G 6mm2, without plug.
MA Digital Dimmer 12 x 2.3kVA TV3 A rack-mountable digital dimmer unit in a 19“ 3U housing with 12 single dimmers 2,300VA with special filter technology and a rise time of 360µs between 10% and 90% at a phase angle of 90°. Designed especially for TV studios, excellent interference suppression can be guaranteed. Further functions and equipment as the MA Digital Dimmer 12 x 2.3kVA. Delivery includes mounted supply H07RN-F 5G 6mm2, without plug.
MA Digital Dimmer 12 x 2.3kVA with RCD A rack-mountable digital dimmer unit in a 19“ 3U housing with 12 single dimmers 2,300VA and built-in RCD breaker rated at 30mA mounted on the front. Further functions and equipment as the MA Digital Dimmer 12 x 2.3kVA. Delivery includes mounted supply H07RN-F 5G 6mm2, without plug.
MA Digital Dimmer 6 x 5.7kVA A rack-mountable digital dimmer unit in a 19“ 3U housing with 6 single dimmers 5.7kVA for very high loads. Protection by normal or double pole breaker. Further functions and equipment as the MA Digital Dimmer 12 x 2.3kVA. Delivery includes mounted supply H07RN-F 5G 10mm2, without plug.
52 MA Digital Dimmer 12 x 3.7kVA A rack-mountable digital dimmer unit in a 19“ 3U housing with 12 single dimmers 3.7kVA for higher loads. Further functions and equipment as the MA Digital Dimmer 12 x 2.3kVA. The dimmer is also available with integrated RCD breaker rated at 30mA. Delivery includes mounted supply H07RN-F 5G 10mm2, without plug.
MA Digital Dimmer 6 x 5.7kVA RCD A rack-mountable digital dimmer unit in a 19“ 3U housing with 6 single dimmers 5.7kVA for very high loads. Protection by one or two breakers, also with built-in RCD breaker rated at 30mA mounted on the front. Further functions and equipment as the MA Digital Dimmer 12 x 2.3kVA. Delivery includes mounted supply H07RN-F 5G 10mm2, without plug.
MA Digital Dimmer 12 x 2.3kVA – Harting MA Digital Dimmer 12 x 2.3kVA – Socapex MA Digital Dimmer 12 x 2.3kVA – Hotpatch
Art. No Art. No Dimensions (w x h x d) weight (kg) 140501 MA Digital Dimmer 12 x 2.3kVA (Harting Han 16E) 140501 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 23 140502 MA Digital Dimmer 12 x 2.3kVA (Socapex EF 419) 140512 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 22 140503 MA Digital Dimmer 12 x 2.3kVA (Wieland Hotpatch 12/2) 140601 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 23 140512 MA Digital Dimmer 12 x 2.3kVA TV3 140504 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 28 140601 MA Digital Dimmer 12 x 2.3kVA RCD (Harting Han 16E) 140508 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 34 140602 MA Digital Dimmer 12 x 2.3kVA RCD (Socapex EF 419) 140608 483 x 132 x 410mm, 19 x 5.2 x 16.1inch 34 140603 MA Digital Dimmer 12 x 2.3kVA RCD (Wieland Hotpatch 12/2) 140504 MA Digital Dimmer 12 x 3.7kVA (Harting Han 16E) 140505 MA Digital Dimmer 12 x 3.7kVA (Socapex EF 419) 140604 MA Digital Dimmer 12 x 3.7kVA RCD (Harting Han 16E) 140605 MA Digital Dimmer 12 x 3.7kVA RCD (Socapex EF 419) 140508 MA Digital Dimmer 6 x 5.7kVA 140507 MA Digital Dimmer 6 x 5.7kVA (Harting HsB6) 140608 MA Digital Dimmer 6 x 5.7kVA RCD 140607 MA Digital Dimmer 6 x 5.7kVA RCD (Harting HsB6) with 2-way Breakers
53 MA Digital Dimmer Touring-Racks
• Equipped with power distribution 63A The special sturdy MA Digital Dimmer Touring-Racks in an Amptown ABS case are delivered or 125A by CEE 3P+N+PE connector with two, three or four MA Digital Dimmer units of different capacities, and are all equipped and 2m cable Powerlock distribution with an integrated power distribution (CEE or Powerlock) including all required RCD and main 250A with powerlock connectors for circuit breakers. For the touring version a hotpatch panel is integrated as a standard feature. The the 48 x 3.7kVA rack dimmer racks are available in different sizes from 24 x 2.3kVA up to 48 x 3.7kVA with a hotpatch panel and as 12 x 5.7kVA without hotpatch panel. Special custom-made dimmer racks are also • Every single dimmer protected by RCD available on request. Customers may also specify power outputs in the form of Harting Han 16E, and fuses ICP/Socapex, CEE17 or Schukoplugs. • Four additional direct power out The whole system is rounded off by the excellent ABS Amptown cases for optimum safety during transport with separate swivel frame and also with additional heavy duty rollers on the back for • MAJOR Hotpatch unit with LED desk ease of manoeuvrability. All touring versions are equipped with Major Hotpatch units complete lamp, Output via 16 Harting Han 16E with a test plug and desk lamps; the output panel can also be equipped with constant current connectors at the back side outputs. • 30mA RCD protection for each dimmer Stable flightcases • Amptown Case with built in ABS Each dimmer rack will be an Amptown ABS rack. These racks are well known as the world leading chassis for optimal safty during touring racks on the road. Power distribution and dimmers are placed in a special inner frame transport and drawer for accessories inside the flightcase for optimal safty “on the road“. and hotpatch cable Hotpatch unit Major Hotpatch unit with four or two outputs per dimmer channel. Earth is directly connected to the output that means even without any patch cabel connected the output is earth protected.
Outputs Outputs are Harting Han 16E connectors with six channels per plug.
MA Digital Dimmer Rack 24 x 2.3kVA TV3 The MA 24 channel dimmer rack TV is equipped with two digital dimmer units 12 x 2.3kVA TV with special filter technology and a rise time of 360µs measured between 10% and 90% at a phase angle of 90°. Designed especially for use in TV studios, excellent interference suppression can be guaranteed. This rack is equipped with 63A power distribution, but with 4 Han 16E and 24 parallel Schuko outputs and is delivered completely wired and in full working order. All dimmer units are protected with 32A breakers per phase. The special shock-proof case offers optimal safety during transport.
54 MA Digital Dimmer Rack 48 x 2.3kVA with MAJOR Hotpatch 48/2 The MA 48 channel dimmer rack is equipped with four MA Digital Dimmer units 12 x 2.3kVA. This rack is equipped with 125A MAJOR power distribution, all required RCD and mains breaker, a 48/2 MAJOR hotpatch panel and 16 Harting Han 16E outputs and is delivered completely wired and in full working order. All dimmer units are protected with 32A breakers per phase. The special shock-proof case offers optimal safety during transport. Rollers are also mounted on the rear for improved transportation. The rack is delivered with 4 MA Digital Dimmer units 12 x 2.3kVA, 125A MAJOR power distribution and includes a desk lamp and drawer for accessories. Hotpatch cables are not included.
MA Digital Dimmer Rack 24 x 2.3kVA with MAJOR Hotpatch 24/4 The MA 24 channel dimmer rack is equipped with two digital dimmer units 12 x 2.3kVA. This rack is equipped with 63A power distribution including all required RCD breakers, a 24/4 hotpatch panel and 16 Harting Han 16E sockets is delivered completely wired and in full working order. All dimmer units are protected with 32A breakers per phase. The special shockproof case offers optimal safety during transport.
MA Digital Dimmer Rack 36 x 2.3kVA, compact version with MAJOR Hotpatch 36/4 A space-saving, compact dimmer rack. The MA 36 channel dimmer rack comes complete with three 12 x 2.3kVA RCD digital dimmer units. This rack is equipped with a power distribution panel, a mains breaker, a 36/4 hotpatch panel and 24 Harting Han 16E sockets. The rack is delivered completely wired and in full working order. Each dimmer unit is protected with a 32A breaker on each phase. Two additional outlets with permanent power are also available. The shock-proof case offers optimal safety during transport, and castors are mounted on the rear for easy handling. The Major hotpatch panel includes a test plug, constant current outputs and a desk lamp including six individual protected permanent power outlets.
Art. No Art. No Dimensions (w x h x d) weight (kg) 140853 MA Digital Dimmer Rack 24 x 2.3kVA TV3 in Amptown 140853 60 x 96 x 93 cm, 23.6 x 37.8 x 36.6inch 140 ABS-Case 140804 60 x 154 x 95 cm, 23.6 x 60.6 x 37.4inch 260 140804 MA Digital Dimmer Rack 48 x 2.3kVA with Hotpatch 48/2 in 140803 60 x 120 x 82 cm, 23.6 x 47.2 x 32.3inch 163 Amptown ABS-Case 140852 60 x 107 x 95 cm, 23.6 x 42.1 x 37.4inch 205 140803 MA Digital Dimmer Rack 24 x 2.3kVA with Hotpatch 24/4 in Amptown ABS-Case 140852 MA Digital Dimmer Rack Rack compact 36 x 2.3kVA with Hotpatch 36/4 in Amptown ABS-Case
55 MA Digital Dimmer Rack 48 x 3.7kVA with MA Digital Dimmer Rack 24 x 3.7kVA with MAJOR Hotpatch 24/4 MAJOR Hotpatch 24/4 + 24/2 A space-saving, compact dimmer rack. The MA 24 channel dimmer rack The MA 48 channel dimmer rack comes equipped with four 12 x 3.7kVA comes complete with two 12 x 3.7kVA RCD digital dimmer units. The MA Digital Dimmer units. This rack is equipped with a 250A powerlock rack is equipped with a power distribution panel, a mains breaker, a distribution panel, RCD protection, a mains breaker, a 24/4 and 24/2 24/4 hotpatch panel and 16 Harting Han 16E outputs. The rack is de- hotpatch panel, as well as 24 Harting Han 16E outputs. The rack is livered completely wired and in full working order. The dimmer units delivered completely wired and in full working order. The dimmer units are protected with a 32A breaker on each phase and two additional are protected with a 63A breaker on each phase. The shock-proof case outlets with permanent power are available. The shock-proof case offers offers optimal safety during transport, and castors are mounted on optimal safety during transport and castors are mounted on the rear for the rear for easy handling. The Major hotpatch panel includes a test easy handling. The Major hotpatch panel includes a test plug, constant plug, constant current outputs and a desk lamp, including six individual current outputs and a desk lamp. protected permanent power outlets.
MA Digital Dimmer Rack 48 x 2.3kVA, compact version with MA Digital Dimmer Rack 12 x 5.7kVA MAJOR Hotpatch 48/2 The MA 12 Channel Dimmer Rack comes complete with two 6 x 5.7kVA A space-saving, compact dimmer rack. The MA 48 channel dimmer rack MA Digital Dimmer units. This rack is equipped with 125A power distri- comes complete with four 12 x 2.3kVA, MA Digital Dimmer units. The rack bution and 12 Harting HsB6 outputs with CEE 32A L+N+PE outputs. The is equipped with an 125A powerlock distribution panel, RCD protection, rack is delivered completely wired and in full working order. a mains breaker, a 48/2 hotpatch panel and 16 Harting Han 16E out- puts. The rack is delivered completely wired and in full working order. Each dimmer unit is protected with a 32A breaker on each phase. The shock-proof case offers optimal safety during transport and castors are mounted on the rear for easy handling. The rack is delivered with four 12 x 2.3kVA MA Digital Dimmer units and 125A power distribution. The rack includes a desk lamp and drawer for accessories. Hotpatch cables are not included.
Art. No Art. No Dimensions (w x h x d) weight (kg) 140851 MA Digital Dimmer Rack 48 x 3.7kVA with 140851 60 x 154 x 95 cm, 23.6 x 60.6 x 37.4inch 280 Hotpatch 24/4 +24/2 in Amptown ABS-Case 140850 60 x 89 x 95 cm, 23.6 x 35 x 37.4inch 168 140850 MA Digital Dimmer Rack compact 24 x 3.7kVA with 140855 60 x 120 x 95 cm, 23.6 x 47.2 x 37.4inch 250 Hotpatch 24/4 in Amptown ABS-Case 140854 60 x 77 x 80 cm, 23.6 x 30 x 31.5inch 140 140855 MA Digital Dimmer Rack compact 48 x 2.3kVA with Hotpatch 48/2 in Amptown ABS-Case 140854 MA Digital Dimmer Rack 12 x 5.7kVA in Amptown ABS-Case
56 Technical data
MA DIGITAL DIMMER and MA DIGITAL DIMMER with RCD – Touring Article 140501 140512 TV3 140502 140511 140503 140504 140505 140507 140508 140521 140523 Descrip- 12 x 2.3kVA 12 x 2.3kVA 12 x 2.3kVA 12 x 2.3kVA 12 x 2.3kVA 12 x 3.7kVA 12 x 3.7kVA 6 x5.7kVA 6 x 5.7kVA 6 x 3.0kVA 6 x 3.0kVA tion TV3 120V (Wieland) (Wieland) with 2-pole (Harting) (Harting) (Socapex) (Socapex) (Hotpatch) (Harting) (Socapex) breakers [140601 RCD] [140612 RCD] [140602 RCD] [140603 RCD] [140604 RCD] [140605 RCD] [140607 RCD] [140608 RCD] [140522 RCD] [140524 RCD] Power Power per 2.3 2.3 2.3 2.3 2.3 3.7 3.7 5.7 5.7 3.0 5.7 Channel (kVA) Dimmer 12 12 12 12 12 12 12 6 6 12 6 Channel Supply Cable (mm2) 6 6 6 10 6 10 10 10 10 No. of phases 3 3 3 3 3 3 3 3 3 Control DMX • • • • • • • • • • • Analogue • • • • • • • • • MIDI • • • • • • • • • Cues 12 12 12 12 12 12 12 12 12 12 12 Non-dim • • • • • • • • • • • Curves 3 3 3 3 3 3 3 3 3 3 3 Outputs Harting 2 2 2 Socapex 2 2 2 Hotpatch 2*12 Harting HsB6 2 2 Rating C10A C10A C10A C20A C10A C16A C16A C25A C25A C13A C25A RCD (30mA) [40] [40] [40] [40] [63] [63] [63] [63] [63] [63]
MA DIGITAL DIMMER RACKS Article 140803 140853 140852 140804 140850 140851 140854 Description 24 x 2.3kVA 24 x 2.3kVA »TV« 36 x 2.3kVA 48 x 2.3kVA 24 x 3.7kVA 48 x 3.7kVA 12 x 5.7kVA Power Power per 2.3 2.3 2.3 2.3 3.7 3.7 5.7 Channel (kVA) Dimmer 24 24 36 48 24 48 12 Channel Inputs Powerlock (in/out) 250 CEE 17 63 63 125 125 125 125 Outputs Hotpatch 4x 4x 2x 4x 4x** Han 16E 16 4 24 16 16 24 HsB6 4 Schuko 24 CEE 32A L+N+PE 12 Permanent Power 2 2 3 2 5 (Schuko) RCD* (30mA) 40 40 40 40 63 63 63 Rack (U) 13 11 15 24 11 26 11 Accessories (drawer) • • Special interference including six individ including six individ suppression 360μs ual permanent power ual permanent power
outlets outlets CEE 16A output
*RCD of Type 40/0,03 **24/2 +24/4 Hotpatch 63/0,03 57 Network
58 World Expo 2010, Shanghai, China China 2010, Expo World Shanghai,
© Paul Collison 59 Networking inside
Compatibility of grandMA2 and grandMA ‘series1’ is key. Both types of consoles can run on the same network via MA-Net. MA-Net2 is running on up to 1,000 Mbit/s. This significantly increases the network’s performance by ensuring highest compatibility with most existing network switches.*
Additional features of the MA-Net2 • 1,000 Base-T Ethernet (1 Gbit/s – Gigabit Ethernet) • With up to 65,536 parameters (up to 256 DMX universes, all parameters in up to 24bit each) • 32 sessions with max. 65,536 parameters in one network are possible • Expanded remote control functions via Telnet • Expanded feedback information for MA VPU software and dimMA
Enhanced parameter expansion Another new feature of both the MA-Net2 and grandMA2 series is the simplification of the parameter expansion. There won’t be any separate parameter expansion mode any longer. Due to an enhanced networking architecture grandMA2 consoles automatically share calculation power within the network. Parameters only need to be expanded by adding one or MAmultiple MA NPU (Networking Processor Units) to the system.
The rule for Parameter Expansion in MA-Net2 is simple: Always one console (the one with the most parameters) counts and additional every added MA NPU!
grandMA2 full-size (8,192 parameters) + = 65,536 parameters
grandMA2 light 14 x MA NPU (4,096 parameters) (backup console)
1 x grandMA2 full-size = 14 x MA NPU = 8,192 parameters + 57,344 parameters = 65,536 parameters
*Does not apply for grandMA2 replay unit.
60 Network Protocols and Standards
Taking the fast development of our industry and constantly increasing requirements in terms of control performance and network design into consideration, new forms of technical communications are needed. The ‘Architecture for Control Networks’ (ACN) shall offer a structure to create network protocols for specific use in the lighting entertainment industry. Since an open standard like ACN takes a while to be developed and agreed on - most of the leading manufacturers in lighting control have already created their own network protocols.
Nowadays, there are two main different protocols on the market. We distinguish between “Transport Protocols” (e.g. Art-Net) and “Real-time Protocols” (e.g. MA-Net). ACN shall cover both ideas, but due to too many different philosophies of the manufacturers, we believe it will take a while to work in the ideal way. However the first part of these protocol suites will be the DMX Streaming protocol sACN (streaming ACN). Practically it works like the Art-Net protocol which just transports DMX data over Ethernet. Therefore and as long as ACN does not provide further performances the MA-Net protocol is more sophisticated. It combines real-time and frame synchronous control of up to 256 DMX universes (MA-Net2), dimMA feedback, video control and feedback integration as well as any in- and output via Ethernet.
MA-Net2/MA-Net will stay the reliable backbone of the grandMA system including all integrated MA Lighting products! Anyway we will support ACN on its way into our lighting entertainment industry to develop it to a full frame of protocols that will help all of us to interconnect in a better way.
The Remote Device Management (RDM) is also future orientated. It is an advanced protocol that offers feedback via standard DMX cabling. In smaller systems, or already existing systems that do not provide any Ethernet cabling, this protocol will be the ideal way to have feedback to the control system. In new environments we already see a step into Ethernet technology that enables the control systems to get hold of much more information in a faster and easier way. Therefore RDM will be a part of the overall puzzle and we value and support this as an additional tool to provide existing installations or smaller systems with feedback information.
grandMA2 light (4,096 parameters) + = 65,536 parameters
grandMA2 ultra-light (backup console) 15 x MA NPU (4,096 parameters)
1 x grandMA2 light = 15 x MA NPU = 4,096 parameters + 61,440 parameters = 65,536 parameters
61 MA NPU (Network Processing Unit)
• Real-time calculation for up to 65,536 parameters with a grandMA2 system (up to 256 DMX universes) • 4,096 HTP-/LTP-parameters (8 x DMX out) • 1 internal command touchscreen (7”) • 1 Ethercon-connection • 4 USB 2.0 connection • Runs in a network with grandMA ‘series1’
The MA NPU (Network Processing Unit) unites the calculation power in the network and offers the same CPU power as the consoles. In total every MA NPU can deal with 4,096 parameters.
With an easy to read touchscreen the MA NPU allows intuitive use and easy access to all the important information. Available with 8 DMX XLR 5pin connectors on the back the MA NPU offers a most flexible use within the network environment.
The MA NPU (Network Processing Unit) is the link between the Ethernet and DMX controlled devices. It’s also possible to use the MA NPU for additional control applications; its full capabil ities are visible when it is operated in MA-Net2. For decentralised DMX networks, the MA NPU converts the incoming Ethernet data into DMX512-A data. To convert DMX data MA-Net and MA-Net2 are supported. Data is transmitted by 8 independent DMX connectors, which can also be configured as DMX inputs.
In a network, whether with grandMA ‘series1’ or grandMA2, several consoles share the MA NPU available. This allows shared use of DMX enabled devices as well as providing a redundant mode of operation without additional components such as DMX mergers. Any MA NPU connected to grandMA2 onPC allows the software to send “real” DMX data. The MA NPU can be connected to a grandMA2 onPC. This possibility turns grandMA2 onPC into a full-featured lighting control system for up to 4,096 parameters.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130032 MA NPU (Network Processing Unit) 130032 485 x 126 x 332mm, 19 x 5 x 13inch 9
62 MA NSP (Network Signal Processor)
• External channel expansion for grandMA ‘series1’ Systems • Can be used as 4Port Node in a grandMA2 network • DMX output in combination with grandMA onPC • Can be controlled via MA-Net and Art-Net • Supports four independent DMX universes, two of which can be used as inputs For decentralised DMX networks, the MA NSP (Network Signal Processor) converts the incoming • Connectors for external VGA monitor, Ethernet data into DMX512-A data. For converting DMX data, two Ethernet protocols are supported: mouse and keyboard MA-Net and Art-Net. • LED indicators for network and DMX activities Data output is by means of four independent DMX connectors, two of which can also be configured as DMX inputs. The MA NSP features an intuitive menu structure, four function keys and an encoder wheel for easy configuration on site. A backlit LCD display with two lines of text shows all of the important information and the operating status. For professional application and maximum flex- ibility, the MA NSP is built in a 19-inch housing which is only 1U in height.
You may choose between different modes of operation when using the MA NSP. Depending on your application, a MA NSP can convert DMX inputs and outputs in an Ethernet, serve as a DMX merger or booster, or even expand your grandMA System by additional parameters. In a grandMA2 system the MA NSP can be used as 4Port Node.
In a grandMA ‘series1’ System, the MA NSP can be used as a decentralised channel expansion for the grandMA ultra-light. For this purpose, not only the DMX signals are distributed among the MA NSP, but so are all calculations necessary. With MA NSP, the grandMA ultra-light becomes a power- ful multi-processor system. The fast, bidirectional data exchange between the grandMA console and the MA NSP ensures that DMX output on all MA NSP units is perfectly synchronized. Each MA NSP can calculate 2,048 channels. A maximum of 16 MA NSP can be used for the output of 64 DMX lines (32,768 channels).
Art. No Art. No Dimensions (w x h x d) weight (kg) 130101 MA NSP (Network Signal Processor), 110V – 240V 130101 483 x 44 x 180mm, 19 x 1.7 x 7inch 3.3 120314 Mini Keyboard for MA NSP 120315 External Mouse, 3 Buttons
63 MA 2Port Node onPC + onPC pro Conversion of ethernet-data to DMX and vice versa
• Rig-mounted box version for flexible use in trusses or mobile applications • MA 2Port Node onPC runs with grandMA onPC or grandMA2 onPC • Powerful show controller for smaller applications • Handy backup solutions for reduced budgets • 512 parameters (MA 2Port Node onPC) or 1,024 parameters (MA 2Port Node onPC PRO) • DMX-in for fader wings or merging of The MA 2Port Node onPC allows the conversion of ethernet-data in DMX and vice versa. In DMX signals combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX. • Integrated part of the MA System They address amongst others the need of theatres and rental companies to flexibly distribute • Speaks MA-Net2/MA-Net and Art-Net DMX on stage or in rigs. If used standalone with grandMA2 onPC the grandMA2 onPC MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC • Stand-alone use with MA-Net2/ PRO) and becomes a powerful show controller for smaller applications. Also handy backup solu- MA-Net and any Art-Net system tions become possible for reduced budgets. The MA 2Port Node onPC versions are available with • Runs with power over Ethernet or integrated power supply, but they will also run with power over Ethernet and thread to put a internal power supply coupler as well as a safety connection point.
• Remote control of backlight and LEDs Two green LEDs will indicate if DMX traffic is generated or received. Both, DMX LEDs and backlight, • Easy, comfortable remote configuration can be switched off remotely. The ‘Finder Functionality’ will give you an elegant solution and way incl. in/out assignment of working – the console can indicate a chosen node by flashing the backlight, but also a button press on the MA 2Port Node onPC will indicate the chosen one in the console. • Also available for flushmount use in fixed installations All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable con- figuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/ grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2/MA-Net and Art-Net, which can be chosen remotely.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130172 MA 2Port Node onPC PRO, 1,024 parameters, rig-mounted 130192 160 x 145 x 50mm, 6.3 x 5.7 x 1.9inch 1.1 touring version incl. power supply, “EU version”, 2x DMX out 130171 MA 2Port Node onPC PRO, 1,024 parameters, rig-mounted touring version incl. power supply, “EU version”, 2x DMX in 130173 MA 2Port Node onPC PRO, 1,024 parameters, rig-mounted touring version incl. power supply, “EU version”, 1x DMX in/ 1x DMX out 130192 MA 2Port Node onPC, 512 Parameters, Rigging-Box EU, 2x DMX out 130191 MA 2Port Node onPC, 512 parameters, rig-mounted touring version incl. power supply, “EU version”, 2x DMX in 130193 MA 2Port Node onPC, 512 parameters, rig-mounted touring version incl. power supply, “EU version”, 1x DMX in/ 1x DMX out
64 MA 2Port Node Conversion of ethernet-data to DMX and vice versa
• Integrated part of the MA System • Speaks MA-Net2/MA-Net and Art-Net • Stand-alone use with MA-Net2/ MA-Net or any Art-Net system • Runs with power over Ethernet or external Power Supply • EU and US Flush-mounted versions • Hardware configurations available: 2 DMX outputs, 2 DMX inputs, 1 DMX in/1 DMX out • Remote control of backlights and LEDs • Easy, comfortable remote configuration The MA 2Port Node supplements the MA Lighting product range for networking and integrated incl. in/out assignment system solutions and provides a tool for converting ethernet-data to DMX-data and vice versa.
The MA 2Port Nodes will be available in two different versions for DMX distribution in fixed installations: One that will fit into a 80mm ‘Flush-mounted’ box (European version) while the ‘US version’ will fit into a two-gang-box. Both versions are available in three socket configurations: two DMX input connectors, two DMX output connectors or one in- and one output connector. For flexible and mobile use there is also a special ‘MA 2Port Node onPC’ available, that even outputs DMX in combination with grandMA2 onPC and grandMA onPC.
The MA 2Port Nodes will run with power over Ethernet (PoE) or external power supply. Two green LEDs will indicate if DMX traffic is generated. Both, DMX LEDs and Backlight, can be switched off remotely. The ‘Finder Functionality’ will give you an elegant solution and way of working – the console can indicate a chosen node by flashing the backlight, but also a button press on the MA 2Port Node will indicate the chosen one in the console.
All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/ grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2/ MA-Net and Art-Net, which can be chosen remotely.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130183 MA 2Port Node Flush-mounted “EU version”, 1x DMX in, 130181 100 x 100 x 45mm, 3.9 x 3.9 x 1.7inch 0.2 1x DMX out 130186 114 x 114 x 45mm, 4.5 x 4.5 x 1.7inch 0.2 130182 MA 2Port Node Flush-mounted “EU-version”, 2x DMX out 130181 MA 2Port Node, Flush-mounted “EU version”, 2x DMX in 130188 MA 2Port Node Flush-mounted “US version”, 1x DMX in, 1x DMX out 130187 MA 2Port Node Flush-mounted “US version”, 2x DMX out 130186 MA 2Port Node Flush-mounted “US version”, 2x DMX in
65
I video I VPU I © Paul Collison © Paul
Singapore National Day 2009 DMX Booster
• Amplifies the incoming DMX signal • Receives one DMX signal and sends seven respective eight identical DMX signals • Seven-way DMX Booster with XLR 5-pin connectors and separated power supply for each output • Eight-way booster with RJ 45 computer network connectors for CAT5 distribution • Selective termination for incomming DMX signal With nowadays installations the heavy use of multiple DMX universes often exceed cable length of • Control LED for incomming DMX 200m or more with up to 32 receivers on one line. Even when using quality cables and a Line-End- signal and selective end of line Plug the signal may be affected by strong electromagnetic interference. By using a Line-Booster to termination refresh the DMX signal half way down, you are no longer limited to the recommended maxima. • DMX lines optically isolated and over-voltage protected On large scale installations it even makes sense to place a booster with multiple outputs on center stage and split the DMX line starshaped, reducing the length and load of the single lines. But keep in mind to use special, shielded DMX cable and select shortest cable run, but separate from power supply and load cables of dimmers.
The DMX booster distributes DMX signals easily and provides a high quality operation reliability by electrically isolating the input and output.
All outputs are amplified except the DMX line „thru“ where the original DMX in line will be avail- able. The DMX booster is the ideal tool for star shaped splitted DMX lines for installations in theater or TV Stations as on stages. It provides a reliabel DMX network with reduced length and load of single DMX lines.
Every single DMX line is powered by a seperate power supply and electrically isolated. Output sockets are available as XLR 5-pin or RJ 45 network connectors. The input signal is optically isolated and has a selective termination.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130419 DMX Booster 1 in 8 (RJ 45 connectors) 130419 483 x 44,5 x 170mm, 19 x 1.8 x 6.7inch 4 130417 DMX Booster 1 in 7 (XLR 5-pin connectors) Scope of delivery: 130415 DMX Booster 1 in 8 (RJ 45 Esta pin assignment) 19“ housing with built in power connection
68 DMX-Merger
• Combines the outputs of two inde- pendent consoles on one DMX line • LoTP or HTP mode merging • Built-in, optional DMX signal termination mode switch for termination of DMX signal. The DMX Merger combines 2 DMX sources (input A and B) into one combined DMX line. • Incoming-DMX signal LED indicator On the fron panele there are 2 XLR 5-pin male and 1 XLR 5-pin female panel jacks, a mode switch for DMX signal termination as well as address switch for DMX input B and LED display • Connections are optically isolated for signal validity. and protected from over or external voltage Input B can be useed with an addressing offset.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130418 DMX-Merger 130418 483 x 44,5 x 170mm, 19 x 1.8 x 6.7inch 4 Scope of delivery: The unit is housed in a 19” rack-mounting case and has a built-in power connection.
Optoisolator-Box
• The DMX connections are optically isolated and protected from over voltage
The Optoisolator Box provides a separated and amplified DMX512 sigal output from a DMX input. The best way of building up transmissions lines in bigger DMX nets and covering huge distances.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130421 Optoisolator-Box 130421 80 x 55 x 150mm, 3.2 x 2.2 x 5.9inch 0.5 Scope of delivery: PVC housing with mounted power cable, XLR 5 male/female in/out connectors
69 Demux-Box 2-channel
• Steel housing with main power cable • Lockabel XLR 5-pin connections • User-friendly functionality • DMX lines optically isolated and over-voltage protected • Socketed circuits for ease of service • Cases for 19”-produts available
The Demux-Box 2-channel receives DMX512 signals and convert them into an analogue control voltage of 0 to +10V. As a Demultiplexer is only one link in a chain, all units are equipped with a DMX outlet socket to forward the signal to the next receiver or for daisy-chain wiring. For reasons of data integrity, any tapping of DMX signals on MA units is optically screened and protected against over-voltage.
All MA Demultiplexers feature input and DMX test indicator LEDs. The analogue outputs are fused by diodes for parallel operation and function as short-circuit protection. The maximum rating per output is 8mA. All units and PC boards are available for 230V AC/50Hz or 110V AC/60Hz.
Via address switches it is possible to chose the first of two analogue signals. Input via XLR 5pin and output via Wieland GST 18 and 2 XLR 3-pin for 0-10V. The controls and the male/female XLR 5 connectors are on the front.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130405 Demux-Box 2-channel 130405 130 x 50 x 175mm, 5.1 x 2 x 6.9inch 2 223403 GST 18 Plug for Demux-Box Scope of delivery: Steel housing with main power cable
70 Demux-Box 1/6-channel
• Steel housing with main power cable • Lockabel XLR 5-pin connections • User-friendly functionality • DMX lines optically isolated and over-voltage protected • Socketed circuits for ease of service • Cases for 19”-produts available
The Demux-Box 1/6-channel receives DMX512 signals and convert them into an analogue con- trol voltage of 0 to +10V. As a Demultiplexer is only one link in a chain, all units are equipped with a DMX outlet socket to forward the signal to the next receiver or for daisy-chain wiring. For reasons of data integrity, any tapping of DMX signals on MA units is optically screened and protected against over-voltage.
All MA Demultiplexers feature input and DMX test indicator LEDs. The analogue outputs are fused by diodes for parallel operation and function as short-circuit protection. The maximum rating per output is 8mA. All units and PC boards are available for 230V AC/50Hz or 110V AC/60Hz.
Optionally one to six DMX512 channels can be used to control six relays. Available in two versions: Outlet with 24V/1A via Sub-D 25 inbuilt panel jack or 230V/16A Wago-Clamps in the housing. Input connection via XLR 5-pin. Start address will be set by three rotary knobs. Control input via XLR 5 male/female panel jacks on the back. All controls are on the front.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130402 Demux-Box 1/6-channel, 24V/1A (Relay Outputs), 130402 225 x 45 x 167mm, 8.9 x 1.8 x 6.6inch 2 Sub-D Connector Scope of delivery: 130401 Demux-Box 1/6-channel, 230V/16A, Wago Terminals Steel housing with main power cable
71 Demux 4 PCB, DUX-LS4 1-10V, address switches on solder side
• Available with the rotary controls on the side or on top – depending on the needs of the installation. • The DMX start address is selected by using four rotary controls. • Disconnection of ballast with four SRC Relay. MA Demultiplexers are also available as PC-boards for building into effects or custom items. • Built-in colour chaser with variable The board comes with all the necessary technical information; however, the installation should be speed control. handled by a qualified professional. All the required connectors are included with the unit. • Connection by Wago connectors This PCB controls the electronic ballasts of 1-4 fluorescent lamps with 1 to +10V. Restlight will without the need for tools. be switched of by SCR relays.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130423 Demux 4 PCB, DUX-LS4 1-10V, address switches on solder side 130423 160 x 35 x 60mm, 6.3 x 1.4 x 2.4inch 0.4 130424 Demux 4 PCB, DUX-LS4 1-10V, address switches sideways Scope of delivery: Unit with a power supply, without a housing
Demux 1/6 PCB 230V/16A
• PCB with integrated power supply for flexible built-up of own systems • High-quality Wago connectors used for all connections
MA Demultiplexers are also available as PC-boards for building into effects or custom items. The board comes with all the necessary technical information; however, the installation should be handled by a qualified professional. All the required connectors are included with the unit. One to six DMX512-channel controlled relays for voltage-free control of up to six switching effects: 230V/16A. DMX512 input connection is via a five pin XLR connector. The start address is set using three rotary controls.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130403 Demux 1/6 PCB 130403 118 x 47 x 164mm, 4.6 x 1.9 x 6.5inch 1 Scope of delivery: Unit with a power supply, without a housing
72 Demux 2 PCB Maxi 230V/16A or 24V/3A
• PCB with integrated power supply for building up own systems • High-quality Wago connectors used for all connections
MA Demultiplexers are also available as PC-boards for building into effects or custom items. The board comes with all the necessary technical information; however, the installation should be handled by a qualified professional. All the required connectors are included with the unit. PCB unit to convert DMX512 into two analogue 0 to + 10V control signals with simultaneous control of two switching relays for up to 16A per output. Input and output connections via Wago connectors.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130404 Demux 2 PCB Maxi, 230V/16A 130404 105 x 47 x 75mm, 4.1 x 1.9 x 3inch 0.4 130407 Demux 2 PCB Maxi, 24V/3A 130407 75 x 19 x 55mm, 3 x 0.7 x 2.2inch 0.3 Scope of delivery: Power supply, Wago-clamp conncetions on the PCB, manual (Art: 130404) Wago-clamp conncetions on the PCB, manual (Art: 130407)
DMX Optoisolator PCB
• Optoisolator PCB with electrically isolated Input and output for DMX lines • Analog inverter for switching of positive control signals 0-10V to negative potentials MA optoisolator PC Board. Refreshes the DMX signal and works like a line booster with optical isolation between incoming and outgoing DMX line. This way it even eliminates over voltage spikes. It also extends the possible length of single DMX lines or can be used as Y-splitter for DMX line branches. Best tool for fixed installations and DMX distribution networks.
Art. No Art. No Dimensions (w x h x d) weight (kg) 130420 DMX Optoisolator PCB 130420 115 x 44 x 40mm, 4.5 x 1.7 x 1.6inch 0.5
Scope of delivery: Power supply, Wago-clamp conncetions on the PCB, manual
73 MA – The Company
74 Olympia 2008,China
© Paul Collison 75 MA Lighting The international standard for control, video, dimming and network
Products that set the standard
Since its foundation in 1983, MA Lighting has expanded to become an international leader for computer-controlled lighting consoles, video control, digital dimming systems and networking solutions. This success is based on solid reasons: With its commitment and power to innovate, MA Lighting meets the growing demands of a constantly changing industry and develops product solutions for tomorrow. With integrated system solutions and the grandMA2/ grandMA product family, international standards were set. These Award winning products offer convenience of use and excellent quality, meeting the highest demands of professional users worldwide. With the convergence of video, LED, digital lighting and the associated media implemen tation in shows and set-designs, new fields of entertainment technologies have evolved. The MA Lighting Technology, Waldbuettelbrunn heart of such systems are the grandMA2/grandMA consoles with their scaleable and flexible control approach. The innovative MA VPU (Video Processing Unit) follows the demands of lighting and visual designers and programmers to bridge the lighting and video worlds.
Two strong partners for your success
The leading international position of MA Lighting rests on two columns – MA Lighting Technology in Waldbuettelbrunn, the centre for production, research and development and MA Lighting International in Paderborn – the marketing, distribution and technical support hub. We are faithful to our motto “The whole is much greater than the sum of its parts”. Our products are fully and individually developed, powerful and extremely competitive, but as a complete MA System, the aggregate MA components built a synergy that is absolutely unequalled on the market.
MA Lighting International, Paderborn
Support and Service
MA Lighting does more than producing and selling products. The dedicated, Paderborn-based service team also offers excellent support for complex solutions on projects and networked lighting systems. A global service network enables fast customer service and professional sales partners who are ready to help users with advice and hands-on support at all times. Via comprehensive training programs MA Lighting aims to give its customers the best qualifications available. This is particularly important for console training, however it permeates the entire company philosophy. Our trainers are the best in their fields, teaching first-hand knowledge on topics presented at large and illustrated in detail. Further information on training is explained on our website.
In order to round up its service and support activities, constantly updated technical information such as operating manuals, datasheets, texts for invitations to tender and further information about the products is available on the website.
Thus, you are always kept up to date – simply visit us at www.malighting.com
76 MA Lighting University Trainings worldwide
By providing comprehensive training programmes, MA Lighting aims to About the training programme offer its customers the best possible qualifications. This is particularly important when it comes to grandMA2/grandMA console training, how- For a better understanding, the MA University training programme is ever it is equally relevant when using an MA VPU (Video Processing Unit) displayed below. or setting up a network via MA-Net2/MA-Net utilising the corresponding The training programme consists of modular units. Working through the MA hardware solutions. grandMA Online Tutorials, you can find on our website, before attending any training is highly recommended. The knowledge gained in graduation Our trainers are the best in their fields and teach with first-hand know- from the grandMA User Training is the premise for all further training. ledge and experience. The topics are presented comprehensively and To suit your specific needs the training programme offers two Advanced are illustrated in detail. To provide you with the best tutorial environ- User Trainings with a special focus on Theatre/Musicals/TV/Studios or ments, the courses contain real equipment and products. The ratio of Concert Touring/Live Event. students to teachers is limited to make the process as comfortable and effective as possible. Trainings within the MA Lighting University are Part of the MA University training programme is also the MA VPU industry recognised, and attendees completing these successfully will Training, for those wanting to delve into video programming with the receive a certificate. powerful MA Video Processing Unit. The MA System Specialist Training covers system configurations, net- work layouts and topology. grandMA 3D deals with the pre-programming and visualisation of projects with this convenient and effective MA Software. For attending the Macros + Telnet course, the most sophisticated console training, you first need to pass the User Training and one of the two Advanced User Trainings.
The training programme of the MA University is certified worldwide by MA Lighting, so we can guarantee continuity of knowledge independent of the training location. Please get in touch with your local MA distribu- tor/office for trainings in your country.
MA Lighting University Macros & Telnet Training Programme
Advanced User Training
Theater/Musicals Concert Touring/ MA System MA VPU grandMA 3D TV/Studios Live Event Specialist
User Training grandMA2 and grandMA
Console Trainings
77 News and Brochures
MA Case Study grandMAgazine
We regularly receive inquiries for further information about our products, The grandMAgazine informs you on latest product news, software-updates as well as questions about other projects, productions and installations as well as outstanding installations and productions around the word. Twice where MA equipment is in use. Lighting Designers, architects, planners a year, our grandMAgazine will also be available in PDF format. Visit www. and professional end-users often want to know more about our techni- malighting.com/grandmagazine.html to see all our last issues. cal solutions, details, designs and configurations. To share this informa- tion, we prepare selected projects and publish them as “Case Studies”. Visit www.malighting.com/case_studies.html to see all our last issues.
MA Lighting newsletter
newsMAil techMAil Our newsletter newsMAil informs you on latest product news as well as Our newsletter techMAil informs you on latest technical developments, outstanding installations and productions around the world at regular software releases and hardware improvements at regular intervals. intervals. To register, please visit: www.malighting.com/newsletter.html
78 MA Lighting online Stay in touch with MA
You can find us in the web also on YouTube, Twitter and Facebook. Have a look at:
www.youtube.com/user/MALightingInt twitter.com/MALighting www.facebook.com/MALighting
MA Merchandising
MA Lighting is proud to present its online MA Merchandising webshop. The shop offers you a whole bunch of MA Lighting merchandise items, like caps, polo shirts, jackets and a selection of professional workwear etc. – all branded with the famous MA logo. All articles are made to the highest quality standards and offer all the comfort and durability you would expect.
Have a look at: www.ma-merchandising.com
Tip
Furthermore there is a whole bunch of concentrated knowledge about MA Lighting products in the internet available. Please have a look at this sites.
http://www.ma-share.net/
http://www.wikima.net/wiki.cgi
http://www.wikima2.net/wiki.cgi/
79 MA worldwide
1 MA Lighting 5 MA Lighting 6 MA Lighting International GmbH Middle East / India Asia Pacific Pte Ltd. An der Talle 24-28 P.O. Box 6491 Block 10 Ubi Crescent 33102 Paderborn, Germany Dubai, UAE #06-28 Ubi Techpark (Lobby B) Phone: +49 5251 68 88 65 10 Phone: +971-4351-3207 Singapore 408564 Fax: +49 5251 68 88 65 88 [email protected] Phone: +65-6513-1897 E-Mail: [email protected] [email protected] Online: www.malighting.com
MA Lighting Eastern Europe, Russia, Scandinavia
2 MA Lighting UK Ltd. 55 Lonsdale Road London NW6 6RA United Kingdom Phone: +44-20-7625-4371 [email protected]
3 MA Lighting North America managed by A.C.T Lighting, Inc. 5308 Derry Ave. Unit R 3 Agoura Hills CA 91301 · USA 3 Phone: +1-818-707-0884 [email protected]
MA Lighting North America East Coast managed by A.C.T Lighting East 122 John Street Hackensack NJ 07601 Phone: +1-201-996-0884 [email protected]
4 MA Lighting Latin America Rua Margarida 350 01154-030 Sao Paulo, Brazil Phone: +55-11-2359-0470 Nextel ID: 55*30*73441 [email protected] 4
MA Lighting worldwide Distributor & Dealer Network
MA Distributors Please check our website for detailed infomation.
80 Support Hotline
Technical Service and Hotline MA Lighting and its extensive distributor network offer an unparalleled technical service. Call on our expertise for help with any problems, no matter if it is regarding operation, software features, software installations or trouble shooting. Please check our “Frequently Asked Questions” provided online or send us an e-mail with your contact details and subject information. This e-mail service is monitored during MA Lightings regular business hours in Germany from 8.30 a.m. until 5.00 p.m., Monday through Friday. For emergency services please contact your local distributor or the MA Lighting Service Hotline. Call: +49.5251.688865-99. Please note, this 24/7 hotline is strictly for emergency cases – for people being in trouble out in the field.
2 1
5
6
81
Extract of worldwide MA Lighting References
Concert Touring/Live Event TV/Studios
• ACDC “Black Ice” – World Tour • German Pop Idol • Bon Jovi “The Circle” – World Tour • SABC – World Cup Broadcast Studio • Green Day – World Tour • MTV Video Music Award • U2 360° – World Tour • Let‘s Dance • Alicia Keys “Freedom” – World Tour • Lopez Tonight • Sting “Symphonicity” – World Tour • Celebrity Big Brother • FIFA World Cup 2010 Kick-off Celebration Concert • Sting Holiday TV Special in Durham Cathedral • World Expo 2010 – Opening Ceremony • Nine • Latin Grammy Awards 2010 • BAFTA Award 200 • Paralympics Opening Ceremony 2010 • BBC’s “Let’s Dance For Comic Relief” • Season of Light 2010 • Australian Idol • and many more ... • and many more ...
Theatre/Musicals Architainment
• Carmen • Opening Ceremony Palm Atlantis Hotel • Teatro Colón • Opening Ceremony Marina Bay Sands • Bubble Theatre – City of Dreams • Westfield London Shopping Centre • Metropolitan Opera • Stadion Center Vienna • Edinburgh Fringe Festival • Opening Ceremony Megyeri Bridge • Salzburger Festspiele • Warsaw Basylica • The Rocky Horror Show – UK Tour • Carnival Dream – Carnival Cruise Lines • Queensland Performing Arts Centre • Sugar Land’s New Year’s Eve Celebration • Shrek – The Musical • Illumination of the Cathedral of Passau • Sister Act • Somnambul – AIDAluna • West Side Story • Glowrama • and many more ... • and many more ...
References online Please check our website for an excerpt of installations and projects with MA Lighting products, we did in co-operation with our international MA distributors, renown designers and/or installation companies. Without having any written permission from the editor it is not allowed to copy, reproduce or publish any part of this catalogue, neither in printed form nor by photos or electronic media. All technical specifications are subject to change without notification. We do not assume liability for any incorrect information in this catalogue. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Product pictures in this catalogue may show optional equipment and accessories.
MA Lighting International GmbH An der Talle 24 - 28 33102 Paderborn / Germany Phone: +49 5251 688865 -10 Fax: +49 5251 688865 -88 [email protected] http://www.malighting.com © 2010 MA Lighting International Version No. X.04
MA Lighting UK Ltd. · 55 Lonsdale Road · London NW6 6RA · United Kingdom · Phone: +44-20-7625-4371 · [email protected] MA Lighting North America · managed by A.C.T Lighting, Inc. · 5308 Derry Ave. Unit R · Agoura Hills CA 91301 · USA · Phone: +1-818-707-0884 · [email protected] MA Lighting Latin America · Rua Margarida 350 · 01154-030 · São Paulo · Brazil · Phone: +55 11 2359 0470 · [email protected] MA Lighting Middle East / India · P.O. Box 6491 · Dubai · Phone: +971-4351-3207 · [email protected] MA Lighting Asia Pacific Pte Ltd. · Block 10 Ubi Crescent · #06-28 Ubi Techpark (Lobby B) · Singapore 408564 · Phone: +65-6513-1897 · [email protected] MA Lighting Eastern Europe, Russia, Scandinavia · Työpajankatu 6 A · 00580 Helsinki · Finland · Phone: +358-400376792 · [email protected]