DOCSLIB.ORG

Directory of Arizona Forest Products Firms

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Directory of Arizona Forest Products Firms . 2015 Directory of Arizona’s Forest Industries & Arizona State Forestry Division Hazardous Fuel 1110 W Washington Suite 100 Phoenix, AZ 85007 Reduction www.azsf.gov Jeff Whitney, State Forester Contractors UPDATED September 2015 New contacts and new business listings 2015 Directory of Arizona’s Forest Industries & Fuel Hazard Reduction Contractors Compiled By Patrick Rappold, Ph.D. Wood Utilization and Marketing Specialist Arizona State Forestry Division Flagstaff District Office 3650 Lake Mary Road Flagstaff, AZ 86005 Office: (928) 774-1425 [email protected] September 2015 Development of this directory was supported by funding from the USDA Forest Service. Forest restoration project on the Kaibab National Forest In accordance with Federal Law and U.S. Department of Agriculture policy, this institution is prohibited from discriminating on the basis of race, color, national origin, sex, age, or disability. (Not all prohibited bases apply to all programs.) To file a complaint of discrimination, write USDA, Director, Office of Civil Rights, Room 326-W, Whitten Building, 1400 Independence Avenue, SW, Washington, DC 20250-9410 or call (202) 720-5964 (voice and TDD). USDA is an equal opportunity provider and employer. ACKNOWLEDGEMENTS Special thanks are given to all the businesses that provided information for the directory. Bill Greenwood of the Northern Arizona Wood Products Association and Allen Ribelin of the Northern Arizona Loggers Association were also instrumental in guiding the content for the directory. The Arizona State Forestry Division would also like to acknowledge that funding for the development of this directory was made available by USDA Forest Service, Region 3 Office in Albuquerque, NM. PREFACE The purpose of this document is to help the public and industry professionals locate and make contact with firms that are part of the Arizona’s forest industries. While every effort was made to ensure the accuracy of the information presented, some items may have changed since the time this document has been published. This directory is an update of the forest products directory compiled in 2011 and 2014 by the Arizona State Forestry Division. Arizona’s forest industries are comprised of many different firms and do play an important role in maintaining healthy forests and economic activity. In 2012 the gross domestic product of Arizona’s wood products manufacturing industries was calculated to be $175 million by the U.S. Bureau of Economic Analysis1. Trade information for 2014, shows that Arizona’s wood product manufacturers exported $40 million of finished goods to twenty-two different countries2. DISCLAIMER The Arizona State Forestry Division does not endorse or recommend any of the contractors listed herein. Nor is the Arizona State Forestry Division responsible for the results of quantity, quality, or professionalism of any work performed. Interested parties are strongly urged to ensure that the contractor chosen to do the work is properly insured, bonded, and licensed. While a list of “Products Manufactured” is given for each company, the consumer is encouraged to contact the company for confirmation and investigation of additional services each company may provide. This directory is for informational purposes only and does not constitute a comprehensive listing. 1 U.S. Bureau of Economic Analysis. Interactive Data Application. Gross Domestic Product by State. NAICS query Wood Products Manufacturing (321) http://www.bea.gov/iTable/iTable.cfm?reqid=70&step=1&isuri=1&acrdn=1#reqid=70&step=10&isuri=1& 7003=200&7035=-1&7004=naics&7005=14&7006=04000&7036=- 1&7001=1200&7002=1&7090=70&7007=-1&7093=levels (accessed May 5, 2015) 2 Foreign Trade Division. U.S. Census Bureau. Export of NAICS 321 – Wood Products from Arizona. http://tse.export.gov/TSE/MapDisplay.aspx (Accessed May 5, 2015) ii TABLE OF CONTENTS Page LISTING OF FIRMS BY COUNTY ............................................................................................ 1 Apache ........................................................................................................................ 1 Coconino ..................................................................................................................... 4 Gila .............................................................................................................................. 9 Graham ..................................................................................................................... 10 Maricopa ................................................................................................................... 11 Mohave ..................................................................................................................... 16 Navajo ....................................................................................................................... 16 Pima .......................................................................................................................... 21 Santa Cruz ................................................................................................................. 23 Yavapai ...................................................................................................................... 23 INDEX OF FIRMS ................................................................................................................ 25 INDEX OF BIOMASS PRODUCERS AND BUYERS ................................................................ 27 APPENDICES ...................................................................................................................... 28 a. Federal Wood Utilization Assistance .................................................................... 28 b. State Wood Utilization Assistance ........................................................................ 28 c. Federal Biomass Utilization Assistance ................................................................. 28 d. Small Business Development Assistance .............................................................. 28 e. Phytosanitation Export Assistance ....................................................................... 28 f. Regional Forest Industry Associations .................................................................. 29 g. Tribal Contacts for Economic Development, Forestry, and Environmental Program Inquiries .......................................................................................................... 29 iii LISTING OF FIRMS BY COUNTY Apache AUGER CANYON ENTERPRISES P.O. Box 232 Contact: Igor Ivanoff Nutrioso, AZ 85932 Phone: 928-339-4880 Services Provided: Tree thinning, tree removal, hazard tree removal, fire breaks, hazard fuel reduction, portable sawmill services, portable firewood processing services Areas Serviced: White Mountains Region ARIZONA LOGS & TIMBERWORKS Contact: Randy Nicoll 1990 W. Central Ave. Phone: 928-333-2751 Eagar, AZ 85925 Website: azlogs.com Type of Operation: Log home manufacturer, retail/distribution of log home components Products: Timber trusses, log trusses, utility poles, vigas, pole fencing, houselogs, pressure treated wood products ARIZONA STRUCTURAL LAMINATORS P.O. Box 2008 Contact: Dave Brown, Sales/Purchasing Eagar, AZ 85925 Phone: 928-333-5501 Type of Operation: Engineered wood Website: azglulam.com Products: Glued laminated timbers (Glulam), engineered headers, heavy glulam & timber trusses, engineered wall logs, engineered prefabricated bridges Import/Export Profile: Imports raw materials and/or finished goods from other states HERB’S TREE SERVICE Contact: Herb Orona Springerville, AZ Phone: 928-245-3121 Services Provided: Tree service, Firewise services, Defensible space preparation and consultation HOLLIDAY TIMBER P.O. Box 436 Contact: Judy Holliday, President Alpine, AZ 85920 Phone: 928-245-1895 Fax: 928-339-4382 Type of Operation: Logging, forest restoration, forestry consulting 1 JD’S BIRDS Contact: J.D. Roe, Chief Operating Officer P.O. Box 622 Phone: 480-440-8870 Eagar, AZ 85925 Website: jdsbirds.com Type of Operation: Sawmill, fuelwood, logging, retail/distribution, dimension products, furniture Species Processed: Utilizing salvage logs from blowdown and beetle infestations Products: Blue stained pine lumber, alligator juniper, cedar slabs and lumber, various size sheds Equipment: Timberking 1600 bandsaw mill LEED’S NORTHWOODS LOGGING P.O. Box 127 Contact: Dan Leeds Greer, AZ 85927 Phone: 928-735-7528 Type of Operation: Logging Products: Lot thinning, hazardous tree removal, general tree service work, fire break installation, full-scale logging NUTRIOSO LOG WORKS Contact: Carl Awtrey, Owner P.O. Box 260 Phone: 928-339-4657 Nutrioso, AZ 85932 Website: nutriosologworks.com Type of Operation: Retail/distribution, and handcrafted log homes Products: Handcrafted log home shells Import/Export Profile: Imports raw materials from other states and exports finished goods to other states NUTRIOSO LOGGING Contact: Tammy Burnett P.O. Box 79 Phone: 928-339-1946 Nutrioso, Az 85932 Type of Operation: Fuels hazard reduction R&B TREE REMOVAL Contact: Bill Rova Springerville, AZ Phone: 928-242-9224 Services Provided: Arborist work, Firewise services, Hazardous tree removal Defensible space preparation and consultation Areas Serviced: White Mountains Region REED'S LOGGING AND HAZARD TREE REMOVAL Box 614 Contact: George Reed Springerville, AZ 85938 Phone: 928-245-0320 Services Provided: Specializes in Hazard Tree Removal, Tree Removal, Thinning, Fire Breaks, Hazard Fuel Reduction
Load more

Recommended publications
  • Investigation of Feller-Buncher Performance Using Weibull Distribution
    Article Investigation of Feller-Buncher Performance Using Weibull Distribution Ebru Bilici Forestry Department, Dereli Vocational School, Giresun University, Giresun 28950, Turkey; [email protected] Abstract: With the advancement of technology in forestry, the utilization of advanced machines in forest operations has been increasing in the last decades. Due to their high operating costs, it is crucial to select the right machinery, which is mostly done by using productivity analysis. In this study, a productivity estimation model was developed in order to determine the timber volume cut per unit time for a feller-buncher. The Weibull distribution method was used to develop the productivity model. In the study, the model of the theoretical (estimated) volume distributions obtained with the Weibull probability density function was generated. It was found that the c value was 1.96 and the b value was 0.58 (i.e., b is the scale parameter, and c is the shape parameter). The model indicated that the frequency of the volume data had moved away from 0 as the shape parameter of the Weibull distribution increased. Thus, it was revealed that the shape parameter gives preliminary information about the distribution of the volume frequency. The consistency of the measured timber volume with the estimated timber volume strongly indicated that this approach can be effectively used by decision makers as a key tool to predict the productivity of a feller-buncher used in harvesting operations. Keywords: forest operations; productivity; Weibull distribution; feller-buncher Citation: Bilici, E. Investigation of Feller-Buncher Performance Using 1. Introduction Weibull Distribution. Forests 2021, 12, Innovative management strategies will be necessary in managing forest resources, 284.
    [Show full text]
  • Mobility Range of a Cable Skidder for Timber Extraction on Sloped Terrain
    Article Mobility Range of a Cable Skidder for Timber Extraction on Sloped Terrain Andreja Đuka *, Tomislav Poršinsky, Tibor Pentek, Zdravko Pandur ID , Dinko Vusi´c and Ivica Papa ID Faculty of Forestry, University of Zagreb, Svetošimunska 23, 10000 Zagreb, Croatia; [email protected] (To.P.); [email protected] (Ti.P.); [email protected] (Z.P.); [email protected] (D.V.); [email protected] (I.P.) * Correspondence: [email protected] Received: 2 August 2018; Accepted: 27 August 2018; Published: 30 August 2018 Abstract: The use of forestry vehicles in mechanised harvesting systems is still the most effective way of timber procurement, and forestry vehicles need to have high mobility to face various terrain conditions. This research gives boundaries of planning timber extraction on sloped terrain with a cable skidder, considering terrain parameters (slope, direction of skidding, cone index), vehicle technical characteristics and load size (5 different loads) relying on sustainability and eco-efficiency. Skidder mobility model was based on connecting two systems: vehicle-terrain (load distribution) and wheel-soil (skidder traction performance) with two mobility parameters: (1) maximal slope during uphill timber extraction by a cable skidder based on its traction performance (gradeability), and (2) maximal slope during downhill timber extraction by a cable skidder when thrust force is equal to zero. Results showed mobility ranges of an empty skidder for slopes between −50% and +80%, skidder with 1 tonne load between −26% and +63%, skidder with 2 tonne load between −30% and +51%, skidder with 3 tonne load between −34% and +39%, skidder with 4 tonne load between −35% and +30% and skidder with 5 tonne load between −41% and +11%.These results serve to improve our understanding of safer, more efficient timber extraction methods on sloped terrain.
    [Show full text]
  • Growinggoldsummer05.Pdf
    KENTUCKY’S GROWING GOLD A PUBLICATION OF: KENTUCKY DIVISION OF FORESTRY FRANKFORT, KENTUCKY 40601 A SERVICE TO KENTUCKY’S FOREST PRODUCTS INDUSTRY AND TIMBERLAND OWNERS VOL. XLV, NO. 3 EDITOR: CHRISTOPHER G. NEVINS SUMMER 2005 THE FOLLOWING MARKED TIMBER FOR SALE IS A LISTING OF TIMBER MARKED BY THE KENTUCKY DIVISION OF FORESTRY FOR PRIVATE WOODLAND OWNERS. THE LIST WAS CURRENT AS OF DATE OF SUBMISSION TO THE PRINTERS. IF YOU WANT FURTHER INFORMATION ON MARKED TIMBER, PLEASE REFER TO THE "COUNTY GUIDE TO DISTRICT FORESTERS' OFFICES" INSIDE THE BACK COVER AND CALL THE APPROPRIATE DISTRICT FORESTER. MARKED TIMBER FOR SALE LOCATION SPECIES AND VOLUME CONTACT CENTRAL DISTRICT TRACT #1 ALLEN CO. RED OAK 15231 BEECH 2661 FRED OLIVER LOCATED NORTH OF YELLOW POPLAR 6115 MISC. OAKS 580 1437 LONGVIEW DR. SCOTTSVILLE, APPROX. 2 WHITE OAK 3881 CHERRY 248 BOWLING GREEN, KY 42104 MILES FROM JCT. OF HWY HARD MAPLE 3315 ASH 164 270-842-7137 31E &HWY 101, ON NORTH HICKORY 2985 BLACKGUM 120 SIDE OF HWY. 1332. TOTAL BF (DOYLE) 35300 29 ACRES 128 TREES MARKED TRACT #2 5 ACRES LOBLOLLY PINE 31340 119 TREES MARKED HART CO. YELLOW POPLAR 20249 SCARLET/SHINGLE OAK 2712 MITCHELL WADDELL LOCATED 10 MILES WEST RED OAK 14296 ASH 1894 3095 ROSEBURG RD. OF MUNFORDVILLE, ON WHITE OAK 9874 WALNUT/CHERRY 1468 CUB RUN, KY 42729 THE SOUTH SIDE OF HICKORY 4405 CHINKAPIN OAK 604 270-524-0113 HWY 88. HARD MAPLE 3880 MISCELLANEOUS 472 38 ACRES BEECH 3387 TOTAL BF (DOYLE) 63241 327 TREES MARKED www.kentuckyunbridledspirit.com 1 OCATION SPECIES AND VOLUME CONTACT CENTRAL DISTRICT NELSON CO.
    [Show full text]
  • Northeastern Loggers Handrook
    ./ NORTHEASTERN LOGGERS HANDROOK U. S. Deportment of Agricnitnre Hondbook No. 6 r L ii- ^ y ,^--i==â crk ■^ --> v-'/C'^ ¿'x'&So, Âfy % zr. j*' i-.nif.*- -^«L- V^ UNITED STATES DEPARTMENT OF AGRICULTURE AGRICULTURE HANDBOOK NO. 6 JANUARY 1951 NORTHEASTERN LOGGERS' HANDBOOK by FRED C. SIMMONS, logging specialist NORTHEASTERN FOREST EXPERIMENT STATION FOREST SERVICE UNITED STATES GOVERNMENT PRINTING OFFICE - - - WASHINGTON, D. C, 1951 For sale by the Superintendent of Documents, Washington, D. C. Price 75 cents Preface THOSE who want to be successful in any line of work or business must learn the tricks of the trade one way or another. For most occupations there is a wealth of published information that explains how the job can best be done without taking too many knocks in the hard school of experience. For logging, however, there has been no ade- quate source of information that could be understood and used by the man who actually does the work in the woods. This NORTHEASTERN LOGGERS' HANDBOOK brings to- gether what the young or inexperienced woodsman needs to know about the care and use of logging tools and about the best of the old and new devices and techniques for logging under the conditions existing in the northeastern part of the United States. Emphasis has been given to the matter of workers' safety because the accident rate in logging is much higher than it should be. Sections of the handbook have previously been circulated in a pre- liminary edition. Scores of suggestions have been made to the author by logging operators, equipment manufacturers, and professional forest- ers.
    [Show full text]
  • Downloading At
    United States Department of MECHANIZED SYSTEMS FOR Agriculture ARVESTING ASTERN ARDWOODS Forest H E H Service Northern Research Station Chris B. LeDoux General Technical Report NRS-69 Abstract In the central Appalachian region, hardwoods traditionally have been harvested by chainsaw felling with trees and logs extracted from the forest to landings by rubber-tired skidders, bulldozers, and crawler tractors. In recent years, mechanized systems that include feller bunchers and cut-to-length (CTL) processors coupled with forwarders and clambunk and grapple skidders have been used increasingly to harvest Eastern hardwoods. Feller bunchers fell trees and pile stems or logs in bunches. CTL processors fell trees and delimb them, buck the stems into logs, and pile them in presorted bunches. Wood piles and bunches are transported to landings by a clambunk or grapple skidder or a forwarder. These system combinations for processing and transporting essentially eliminate the need for woods workers on the ground, a major advantage from a production and safety standpoint, and greatly reduce adverse effects on the site compared to chainsaw felling and conventional skidding. Feller buncher and CTL systems are reviewed, results of environmental impact studies are presented, and cost equations for a range of operating conditions in Eastern hardwoods are provided. The Author CHRIS B. LEDOUX is a research industrial engineer with the U.S. Forest Service’s Northern Research Station at Morgantown, West Virginia. Manuscript received for publication December 2009 Cover Photo 1. Cut-to-length processor (photo courtesy of Andrew 2 Whitman, Manomet Center for Conservation 1 Sciences); 2. Crawler dozer (photo courtesy of Caterpillar); 3.
    [Show full text]
  • Pnw Gtr092.Pdf
    ABSTRACT An operational test of a small, pro- totype running skyline yarder was con- ducted early in 1978. Test results indicate that this yarder concept prom- ises a low cost, high performance system for harvesting small logs where skyline methods are indicated. Timber harvest by thinning took place on 12 uphill and 2 downhill skyline roads, and clearcut harvesting was performed on 4 uphill skyline roads. Skyline roads were spaced about 46 meters (150 feet) apart and were up to 335 meters (1,100 feet) long. Delays caused by the yarder were insignificant. Production as high as 343 logs per day was achieved. KEYIJORDS: Logging equipment engineering, production studies(-forest operations, logging operations analysis/design, logging economics. Contents Introduction .............1 Yarding System ............1 Testsite. ..............3 Logging Layout ............3 Logging Operation. ..........4 Test Description ...........4 Test Results .............4 Summary. ...............7 Literature Cited ...........7 Yarding System The peewee yarder operates a running skyline system as shown in figure 1. MAIN LINE7 HAULBACK UN SLACK-PULLING/ LINE Figure 1.--Running skyline system. The running skyline system was chosen because it provides a combination of features which are not available with other cable logging systems. These include: high mobility due to minimum Introduction rigging and small, light lines; versa- tility due to the ability to log uphill An operational test of the prototype and downhill; and lateral yarding capa- peewee yarder was performed as part of bility for partial cut operations which a program to develop a system for is provided by the slack-pulling car- harvesting small logs in areas where riage. General specifications for the cable logging methods are required.
    [Show full text]
  • Productivity and Cost of Manual Felling and Cable Skidding in Central
    ." .~ ~' Productivity and cost of manual felling f< 1 f:.I and cable skidding in central Appalachian hardwood forests Jingxin Wang* Charlie Long Joe McNeel John Baumgras chainsaw and skidding with a cable Abstract skidder. Time studies showed that hour- A field production stlldy was conducted for a manual harvesting system using a ly felling production increased while chainsaw and cable skidder in a central Appalachian hardwood forest site. A partial cut skidding productivity decreased from was performed on a 50-acre tract with an average slope of25 percent. Felling time per the treatments 45 percent, to-60 percent, tree was most affected by diameter at breast height and the distance between harvested and to 75 percent of residual stocking. trees while skidding cycle time was mainly affected by turn payload size and skidding Regression equations were later devel- distance. Productivity of chainsaw felling was 362 ft.3 per productive machine hour oped based on the above time-study data (pMH) (2.23 thousand board feet [MBF]/PMH) with a wlit cost of$8.0/cunit (100 cu- (Brock et a1. 1986), which can be used bic feet) ($13.0/MBF). Cable skidding productivity was 289 ft.3/pMH (1.78 MBF/ for estimating production rates and costs PMH) and unit cost was $27.0/cunit ($50.0/MBF). The balanced manual harvesting for similar thimling operations. system could produce 7,236 ft.3 per week (44.63 MBF/week) with unit cost of Howard (1987) took a different ap- $37.0/cunit ($60.0/MBF). proach to estimating timber harvesting production and cost with cable skidders by collecting shift-level data on fuel consumption, repairs, maintenance, different machine and harvest prescrip- and other operating costs and combined GenerallY the more mechanized the tions.
    [Show full text]
  • Forestry Equipment Fleet Guide
    FORESTRY EQUIPMENT FLEET TO FIND SUCCESS IN THE FOREST, YOU CAN WAIT FOR THE PERFECT SET OF CONDITIONS. Or give yourself every advantage to create your own. Productive machines. Innovative technology. Useful insights. Dependable support. The obstacles to success are many. John Deere helps you OUTRUN™ THEM ALL. 2 3 Contents Feller Bunchers, Tracked 4 Shovel Loggers 9 Feller Bunchers, Wheeled 11 Forestry Swing Machines 13 Forwarders 20 Harvesters, Tracked 24 Harvesters, Wheeled 28 Knuckleboom Loaders 31 Skidders 33 Bogie Skidder 37 John Deere Work Tools 39 Waratah Attachments 43 Compact Track Loaders 48 Skid Steers 50 Crawler Dozers 52 Excavators 54 Motor Graders 56 Wheel Loaders 58 John Deere Precision Forestry 60 John Deere Connected Support™ 62 Additional Dealer-Delivered Uptime Solutions 64 JohnDeere.com/forestry Feller Bunchers, Tracked Now we’ve done it — again. When we designed our next-generation 800M- and 900M-Series machines, we relied on over a half-century of forestry-equipment experience backed by the invaluable input of people just like you who run them every day. These job-proven models have been redefining uptime, productivity, and low daily operating costs because you wanted them to. Thanks to those on the ground, in the woods, and at the landing, these tracked feller bunchers continue to change the game. 4 5 Tracked Feller Bunchers 803M Engine 224-kW (300 hp) John Deere PowerTech™ PSS 9.0 L Forestry U6 EXD (Extreme Duty): 203.2-mm (8.0 in.) track chain, (9) lower rollers undercarriage per side Undercarriage- N/A leveling mechanism Ground 744 mm (29 in.) with single-grouser tracks clearance Tractive effort Standard travel: 245 kN (55,078 lbf) Dedicated travel: 245 kN (55,040 lbf) Ground pressure, 59.4 kPa (8.6 psi) less attachment Includes standard equipment, 6.71-m boom, standard counterweight, half-full fuel tank, and 610-mm (24 in.) single-grouser tracks.
    [Show full text]
  • Portable Fuel Tanks Facilitate Equipment Fueling
    Technical Release 00-R-8 FOREST RESOURCES ASSOCIATION INC. 600 Jefferson Plaza, Suite 350 Rockville, Maryland 20852 Phone: 301/838-9385 Fax: 301/838-9481 PORTABLE FUEL TANKS FACILITATE EQUIPMENT FUELING Fuel: storage/carriers June 2000 INTRODUCTION: Doll Lumber Company of Southington, Ohio operates three logging crews in northeastern Ohio. Equipment mix includes three skidders, a bulldozer, a truck- mounted loader, and two trailer-mounted loaders. To facilitate safe and efficient fueling of their logging equipment, Doll designed and fabricated portable fuel tanks that can be transported easily by truck and can be moved around the logging site by the skidders. GENERAL FEATURES: The tanks are fabricated so that a skidder blade can hook onto the tank and lift it to be moved. There is also Fig. 1: Doll Lumber’s custom-built fuel tank a steel grab tube that allows a knuckleboom loader to lift the tank and load it onto a log truck. Since skidder blades of various models differ, the tanks are built specifically for a particular skidder blade. Each tank is labeled so that the operator can easily identify the tank for his machine. The tanks are equipped with an electric pump that is operated from the skidder or loader by means of a plug receptacle located next to the seat of the machine. The pump is protected by an enclosure with a hinged door that can be padlocked. OPERATION: When moving to a new logging site, the skidder lifts the tank with the blade Fig. 2: A skidder (or a loader) may move the tank.
    [Show full text]
  • Dolbeer Donkey Engines Saved by Hume Lake District Sequoia National Forest, California
    Dolbeer Donkey Engines Saved by Hume Lake District Sequoia National Forest, California By Larry Cabodi Larry started as a fire crewman on the Eldorado NF in 1957, becoming a Forest Guard through 1961. He became Forester in 1962 after graduating from Humboldt State, then a Resource Forester until transferring to the Sequoia NF in 1966. He was DTMA/TMO until 1975, when he transferred to the Lassen NF. He moved to Resource Officer then was promoted to District Ranger on the Six Rivers NF in 1979. He retired to construction and a small cattle ranch in 1994, after 34 years of service. He and his wife of 46 years reside in Standish, CA The historic logging around Grant Grove on the Hume Lake District, Sequoia National Forest, was significant in many ways. Paul Spivey, Hume Lake District Recreation Officer, found two Dolbeer donkey engines rusting away in the Evans Grove area on the Camp 7 Road since the end of the redwood-logging era. Paul was the sparkplug in the effort that salvaged these important pieces of redwood logging history from what is now a part of the Giant Sequoia National Monument in the Sequoia National Forest. The Hume Bennett Logging Company started in the 1890s. The company changed hands five times and shut down around 1928 when the mill at Hume Lake burned. During that period they used every form of logging equipment known at the time. Everything had to be hauled into the area by wagon, and the milled lumber was removed by flume that reached 55 miles, over terrain almost impossible to walk, along the rim of the Kings Canyon to the town of Sanger near Fresno.
    [Show full text]
  • Cat 545 Skidder
    545 ® Skidder Featured machines may include additional equipment applicable Cat® 3306 DITA Engine 545 545 onlyapplicable for special only forapplications. special applications. See your Caterpillar dealer for availableSee your options.Caterpillar dealer for available options. CatGross® 3304 Power DIT Engine 168 kW 225 hp GrossWheel Power Base 153 HP3838 114 kW mm 175 151.1HP in 130 kW WheelGrapple Base Capacity 130 in 3300 1.5 mm m2 138 in16 ft2 3505 mm GrappleOperating Capacity Weight 8 ft2 18.74 217 m2 kg 40,1619 ft 2lbs- 13.5 ft2 .84 m2 - 1.25 m2 545 Skidder The 545 Skidder is built to exceed all expectations for skidding performance, reliability and comfort while maximizing productivity. Powertrain Application Flexibility Cradled Front Axle The field-proven Cat 3306 DITA diesel The 545 Skidder provides unsurpassed This enhanced design provides a weight engine, heavy-duty torque converter performance and application flexibility forward balance for outstanding grapple with lock-up, new five speed due to improved balance, torque and cable skidding performance while transmission and re-engineered converter with lock-up powertrain, providing a comfortable ride for the differential lock system provide higher ground clearance and an extended operator. pg. 6 horsepower to the ground to maximize wheelbase. pg. 5 performance and productivity. pg. 4 Engineered for demanding work. This skidder is a state-of-the-art machine that represents Caterpillar’s commitment to the logging industry. Reliable, durable operation. Rugged construction and easy maintenance provide long hours of service with the low operating costs you expect from Cat machines. 2 Load-Sensing Hydraulic System Operator Environment Serviceability The load sensing hydraulic system Ergonomically engineered to provide the Easily perform maintenance jobs with reduces horsepower consumption and operator increased comfort, spaciousness easy access to major service points such system heat.
    [Show full text]
  • Predesignatedskid Trails 2.2.1.3 Reforestation
    Chapter 2—Alternatives 2.2.1.2 Timber Yarding Ground-based yarding In ground-based yarding, a machine travels to the logs and pulls them to the landing. The machines used for skidding are diverse and can have wheels or tracks. Trees and logs are removed from the woods using rubber- tired skidders, tracked skidders, or forwarders. The skidders yard the trees to the landing by lifting the front end of the logs off the ground. Skidders travel on skid trails that are designated and approved by the BLM. A feller-buncher fells and bunches trees mechanically. The typical feller-buncher is track mounted. Some must move from tree-to-tree for felling, while others use a boom to fell multiple trees from a single position. The feller-buncher bundles trees for a skidder to pick up and move to a landing. A forwarder is a rubber-tired machine that typically works with a harvester. Harvesters move through the stand felling, delimbing, bucking, and bunching trees selected for harvest. Forwarders travel into the stands on the slash created by the harvester. They load the logs piled by the harvester and carry them to the road where they are ofF-loaded. The logs carried by a forwarder do not touch the ground during travel. Ground-based yarding is generally limited to slopes of 35% or less. After harvest is complete, skid trails and landings not needed for future management would be ripped, seeded, and mulched. Skyline-cable yarding Skyline-cable yarding uses steel cables to pull logs to the landing. A stationary machine, or yarder, would be located on the road and would pull logs up to the landing with one end of the log suspended.
    [Show full text]