QUBI-RIO 110 in Ethernet Relais Module GERMANY
Total Page:16
File Type:pdf, Size:1020Kb
https://datarespons.solutions MADE QUBI-RIO 110 IN Ethernet Relais Module GERMANY Ethernet Relay Module The Ethernet Relay Module is a compact module for test and performance automation. With the 24 relays á 2A it owns a high flexibility and the open Applica- tion Programming Interface. It is easy to start up and use. Description Applikationen The peculiarity of the QUBI-RIO 110 • Test automation lies in the open programming. The access to the relay is carried out • endtest in production 24 Relays 12A directly via the socket. This means • IIOT gateway that almost all switching tasks • Rleay matrix applications can be implemented flexibly and tailored. The system is independent • Mobile control unit test of the operating system and works without any drivers and no current- software license costs. Key Features Open API Web Interface Areas of use • 10/100 Mbit/s LAN Schnittstelle With the QUBI-RIO 110 tests with • API in high programming language higher loads up to 2A will be per- • 24 mechanical relays formed completely automated. With • standalone time function the QUBI-RIO 110 short circuits on Power,- bus line or in/output- • Operating temp.: -40°C ... +70°C TCP/IP, UDP Plug & Play triggered by cable breaks - can be simulated quickly and automatically. Furthermore, switching tasks such as the control of traffic lights in the lean production, or the final test can XS be realized by electronic components. Extra small DIN Rail Rev. 12/17 https://datarespons.solutions QUBI-RIO 110 Ethernet Relay Module The test unit QUBI RIO 100 is with its 24 12A/240VAC relays and the com- pact und robust design, designed for applications in the verifying and test automation field. The device has two interfaces: USB or Ethernet. Thereby a server client communication is established by the access on the IO-Socket of the system. The programming is possible in the following high level languages like C, C++, C#, Visual Basic, Python, Perl or and PHP is available. With QUBI RIO it is possible to customize and fully automate the simulation of cable bra- kes and short circuits. With the open Application Programming Interface QUBI RIO unifies high standardization with flexibility and customization. All advantages at one glance: • 24 High performance Relays with 12A The QUBI-RIO 110 can be • For all operating Systems ( Windows, Linux etc.) easily installed via DIN • Compact and robust Rail mounting. • Standalone mode • Plug-in-Play start and use • Open Application Programming Interface • Supports C, C++, C#, Java, .NET and Python • No external software needed • Web interface for quick installation • Extended Temperature Range (-40°C to +70°C) • Ethernet and USB communication Automation of short circuit tests and simulati- ons of actuators. Rev. 12/17 https://datarespons.solutions QUBI-RIO 110 Ethernet Relay Module Relay specification Relay 2 A signal relay, SPST-NO Relay arrangement 24 normally open (Roff ≥ 1MΩ ; Ron ≤ 1Ω) Switching speed communication 2 ms Galvanic isolation 2000 V DC between primary/secondary circuit Switching and feed-through current max. 2 A (per relay) Switching and feed-through voltage (DC) max. 60 V DC Switching and feed-through power (DC) max. 30 VA Switching speed incl. contact bounce 8 ms Switching frequency max. 100 Hz Guaranteed switching cycles max. 100.000 switching cycles Contact resistance (feed-through) max. 0,5 Ω Isolation resistance relay contacts min. 1 MΩ (test voltage 500 V DC) Isolation relay contacts to control min. 2000 V AC (test parameters 1mA/50-60Hz/1min) Recommended load min. 2 mA at 5 V DC Electrical specification Supply voltage (Upower) nominal: 12/24/48 V DC Supply voltage trip level 9,2 V DC Power connector 2 pole female Reverse polarity protection min. 60 V DC Power consumption min. 0,5 W, typ. 2 W, max. 6 W Peak inrush current typ. 1000 mA, max. 1500 mA (Requirement:Upower=24V for 2ms) Mechanical specification Dimension housing (H x W x D) 170 x 115 x 44 mm Housing IP protection class IP 20 Weight 585 g Relay contacts connector 12x4 pole spring-loaded terminals Environment specification Storage temperature -40°C to +85°C Humidity non-condensing 35% to 85% Operating temperature -40°C to +70°C (regard derating note in the manual) EMC Immunity DIN EN 61000-6-2 : 2006 Emission DIN EN 61000-6-4 : 2011 Order information Order no. Product-Code Description Number of Relays Relay 006-110-100 QUBI-RIO-100 Ethernet Remote Relay Module 12A 24 12A 006-110-101 QUBI-RIO-110 Ethernet Remote Relay Module 2A 24 2A Rev. 12/17 Main offices Group HQ Denmark Data Respons ASA Data Respons A/S Sandviksveien 26 Smedeholm 10 NO-1363 Høvik, Norway DK-2730 Herlev Tel.: +47 67 11 20 00 Tel.: +45 88 32 75 00 [email protected] [email protected] Sylog AB Jan Stenbecks Torg 17, III Germany Norway SE-164 40 Kista Data Respons GmbH Data Respons Norge AS Tel.: +46 (0)8 750 49 00 Amalienbadstr. 41, Bau 53 Sandviksveien 26 DE-76227 Karlsruhe NO-1363 Høvik Tel.: +49 721 480 887 10 Tel.: +47 67 11 20 00 TechPeople A/S [email protected] [email protected] Smedeholm 10 DK-2730 Herlev Sweden Taiwan Tel.: +45 88 32 75 00 Data Respons AB Data Respons ASIA Jan Stenbecks Torg 17, III 18F-6 NO. 738, MicroDoc Computersysteme GmbH SE-164 40 Kista Chung-Cheng Road, Elektrastrasse 6A Tel.: +46 8 501 688 00 Chung-Ho, New Taipei D-81925 Munich, Germany [email protected] Tel.: +886 2 8226 2150 Tel: +49-89-551969-0 https://datarespons.solutions.