DOCSLIB.ORG

Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Description CircuitWorks® Conductive Grease, otherwise known as thermal greases, thermal gel, thermal compound, thermal paste, heat paste, heat sink paste or heat sink compound, are conveniently packaged in syringes for fast and easy application, and to reduce mess and wastage. The range covers a number of electronic production, rework and repair applications. We offer three types of conductive grease: Silver Conductive Grease Boron Nitride Heat Sink Grease Silicone Free Heat Sink Grease Features & Benefits RoHS compliant Conveniently packaged to reduce waste and mess Silicone free option available compound will not harden or dry out Excellent thermal conductivity Silver Conductive Grease The CIR CW7100 CircuitWorks® syringe dispenser for precise application of grease to provide Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease superior electrical and thermal conductivity, lubrication and protection. Maximum electrical and thermal conductivity Protects against moisture and corrosion Thermally stable over a wide temperature range Conductive lubricant containing pure silver Fills connector gaps to maximize electrical and thermal conductivity Controls static discharge Grounds circuits Typical Applications Lubrication of substation switches or circuit breakers Heat dissipation from transformers Low or medium speed sliding contacts Static grounding on seals or O-rings Extending the life of rotating switches Specifications Material 100% silver filled silicone grease Colour Silver/grey Specific gravity @ 25°C 2.5 Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Specifications Consistency Smooth paste Volume resistivity < 0.01 ohm-cm 5.6 W/m°K Thermal conductivity 38.8 BTU-in/hr-ft2 -°F 1.3 x 10-2 CAL-cm/sec-cm2 -°C Operating temperature range -57 to 252°C Unworked penetration (ASTM D-1403) 210 Worked penetration (ASTM D-1403, 60 Strokes) 250 Dropping point (ASTM D-2266) 255°C Steel on steel wear (ASTM D-2266) 1.5mm Corrosion on copper None Moisture resistance Excellent Chemical resistance Excellent Electrical conductivity Excellent Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Specifications Thermal conductivity Excellent Lubrication properties Excellent Protection from oxidation Excellent Power rating High/low Shelf life 2 years RoHS compliant The CIR CW7250 CircuitWorks® syringe dispenser for precise application of an ultra-high efficiency, thermally conductive grease. Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Provides maximum thermal conductivity with superior dielectric properties Silicone free compound will not harden or dry out Electrically insulative; noncorrosive and nonflammable Thermally stable from –73°C to 200°C Exceeds MIL-C-47113 for Thermal Conductivity Formulated for maximum heat transfer between circuit components and heat sinks without electrical conductivity Typical Applications Thermal coupling for any heat sink device Nonflammable protective coating High voltage corona protection Improving readings on contact type thermocouples Specification Colour White Specific gravity @ 25°C 1.5 Usable temperature range -73°C – 200°C Dielectric strength, volts/mil 400 Dielectric constant @ 100Hz 2.2 Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Specification Dissipation factor @ 100Hz 0.002 Volume resistivity, ohm-cm 1 x 1012 Arc resistance, seconds 120 1.85 W/m°K Thermal conductivity 4.4 x 10-3 Cal-cm/sec-cm2 °C 12.35 BTU-in/hr-ft2 -°F Shelf life 5 years RoHS compliant Silicone Free Heat Sink Grease The CIR CW7270 CircuitWorks® syringe dispenser for precise application of an ultra-high efficiency, thermally conductive grease for silicone sensitive environments. Silicone free compound will not harden or dry out Excellent thermal conductivity and dielectric properties Non-corrosive Exceeds MIL-C-47113 for thermal conductivity Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Excellent heat transfer between circuit components and heat sinks, without any silicone migration Typical Applications Effective thermal coupler for any heat sink device Nonflammable protective coating High voltage corona protection Excellent for improving readings on contact type thermocouples Ideal for silicone sensitive environments Specification Colour White Specific gravity @ 25°C 2.4 Usable temperature range -15°C – 200°C Dielectric strength, volts/mil 500 Dielectric constant @ 100Hz 4.4 Dissipation factor @ 100Hz 0.005 Volume resistivity, ohm-cm 1 x 1012 Arc resistance, seconds 120 Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Specification 0.71 W/m°K Thermal conductivity 1.7 x 10-3 Cal-cm/sec-cm2 °C 4.95 BTU-in/hr-ft2 -°F Shelf life 5 years RoHS compliant Ordering Information Part number Description CIRCW7100 Silver Conductive Grease 6.5 grams (1 syringe) Boron Nitride Heat Sink Grease 3.4 grams (1 CIRCW7250 syringe) Silver Conductive Grease, Boron Nitride Heat Sink Grease, Silicone Free Heat Sink Grease Part number Description Silicone Free Heat Sink Grease 7 grams (1 CIRCW7270 syringe) Next Steps Our technical team are on hand to discuss your application requirements. Click here to get in touch. Find out more information on how to purchase. Supplied by: INTERTRONICS 12a Station Field Industrial Estate, Banbury Road, Kidlington Oxfordshire England OX5 1JD t 01865 842842 e [email protected] Last updated: August 2020 Version: 3.1 Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith..
Load more

Recommended publications
  • The Lithium, Boron and Beryllium Content Of
    Published in Geochimica et Cosmochimica Acta 72, issue 22, 5475-5504, 2008 1 which should be used for any reference to this work The Lithium, Boron and Beryllium content of serpentinized peridotites from ODP Leg 209 (Sites 1272A and 1274A): Implications for lithium and boron budgets of oceanic lithosphere Flurin Vils a,*, Laure Pelletier a, Angelika Kalt a, Othmar Mu¨ntener b, Thomas Ludwig c a Institut de Ge´ologie et d’Hydroge´ologie, Universite´ de Neuchaˆtel, Rue Emile-Argand 11, CP 158, CH-2009 Neuchaˆtel, Switzerland b Institut de Mine´ralogie et Ge´ochimie, Universite´ de Lausanne, Anthropole, CH-1015 Lausanne, Switzerland c Mineralogisches Institut, Ruprecht-Karls-Universita¨t Heidelberg, Im Neuenheimer Feld 236, D-69120 Heidelberg, Germany Abstract Despite the key importance of altered oceanic mantle as a repository and carrier of light elements (B, Li, and Be) to depth, its inventory of these elements has hardly been explored and quantified. In order to constrain the systematics and budget of these elements we have studied samples of highly serpentinized (>50%) spinel harzburgite drilled at the Mid-Atlantic Ridge (Fifteen– Twenty Fracture zone, ODP Leg 209, Sites 1272A and 1274A). In-situ analysis by secondary ion mass spectrometry reveals that the B, Li and Be contents of mantle minerals (olivine, orthopyroxene, and clinopyroxene) remain unchanged during serpent- inization. B and Li abundances largely correspond to those of unaltered mantle minerals whereas Be is close to the detection limit. The Li contents of clinopyroxene are slightly higher (0.44–2.8 lggÀ1) compared to unaltered mantle clinopyroxene, and olivine and clinopyroxene show an inverse Li partitioning compared to literature data.
    [Show full text]
  • Of the Periodic Table
    of the Periodic Table teacher notes Give your students a visual introduction to the families of the periodic table! This product includes eight mini- posters, one for each of the element families on the main group of the periodic table: Alkali Metals, Alkaline Earth Metals, Boron/Aluminum Group (Icosagens), Carbon Group (Crystallogens), Nitrogen Group (Pnictogens), Oxygen Group (Chalcogens), Halogens, and Noble Gases. The mini-posters give overview information about the family as well as a visual of where on the periodic table the family is located and a diagram of an atom of that family highlighting the number of valence electrons. Also included is the student packet, which is broken into the eight families and asks for specific information that students will find on the mini-posters. The students are also directed to color each family with a specific color on the blank graphic organizer at the end of their packet and they go to the fantastic interactive table at www.periodictable.com to learn even more about the elements in each family. Furthermore, there is a section for students to conduct their own research on the element of hydrogen, which does not belong to a family. When I use this activity, I print two of each mini-poster in color (pages 8 through 15 of this file), laminate them, and lay them on a big table. I have students work in partners to read about each family, one at a time, and complete that section of the student packet (pages 16 through 21 of this file). When they finish, they bring the mini-poster back to the table for another group to use.
    [Show full text]
  • A New Strategy of Bi-Alkali Metal Doping to Design Boron Phosphide Nanocages of High Nonlinear Optical Response with Better Thermodynamic Stability
    A New Strategy of bi-Alkali Metal Doping to Design Boron Phosphide Nanocages of High Nonlinear Optical Response with Better Thermodynamic Stability Rimsha Baloach University of Education Khurshid Ayub University of Education Tariq Mahmood University of Education Anila Asif University of Education Sobia Tabassum University of Education Mazhar Amjad Gilani ( [email protected] ) University of Education Original Research Full Papers Keywords: Boron phosphide (B12P12), Bi-alkali metal doping, Nonlinear optical response (NLO), Density functional theory Posted Date: February 11th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-207373/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Version of Record: A version of this preprint was published at Journal of Inorganic and Organometallic Polymers and Materials on April 16th, 2021. See the published version at https://doi.org/10.1007/s10904-021-02000-6. A New Strategy of bi-Alkali Metal Doping to Design Boron Phosphide Nanocages of High Nonlinear Optical Response with Better Thermodynamic Stability ABSTRACT: Nonlinear optical materials possess high rank in fields of optics owing to their impacts, utilization and extended applications in industrial sector. Therefore, design of molecular systems with high nonlinear optical response along with high thermodynamic stability is a dire need of this era. Hence, the present study involves investigation of bi-alkali metal doped boron phosphide nanocages M2@B12P12 (M=Li, Na, K) in search of stable nonlinear optical materials. The investigation includes execution of geometrical and opto-electronic properties of complexes by means of density functional theory (DFT) computations. Bi-doped alkali metal atoms introduce excess of electrons in the host B12P12 nanocage.
    [Show full text]
  • Periodic Table of the Elements Notes
    Periodic Table of the Elements Notes Arrangement of the known elements based on atomic number and chemical and physical properties. Divided into three basic categories: Metals (left side of the table) Nonmetals (right side of the table) Metalloids (touching the zig zag line) Basic Organization by: Atomic structure Atomic number Chemical and Physical Properties Uses of the Periodic Table Useful in predicting: chemical behavior of the elements trends properties of the elements Atomic Structure Review: Atoms are made of protons, electrons, and neutrons. Elements are atoms of only one type. Elements are identified by the atomic number (# of protons in nucleus). Energy Levels Review: Electrons are arranged in a region around the nucleus called an electron cloud. Energy levels are located within the cloud. At least 1 energy level and as many as 7 energy levels exist in atoms Energy Levels & Valence Electrons Energy levels hold a specific amount of electrons: 1st level = up to 2 2nd level = up to 8 3rd level = up to 8 (first 18 elements only) The electrons in the outermost level are called valence electrons. Determine reactivity - how elements will react with others to form compounds Outermost level does not usually fill completely with electrons Using the Table to Identify Valence Electrons Elements are grouped into vertical columns because they have similar properties. These are called groups or families. Groups are numbered 1-18. Group numbers can help you determine the number of valence electrons: Group 1 has 1 valence electron. Group 2 has 2 valence electrons. Groups 3–12 are transition metals and have 1 or 2 valence electrons.
    [Show full text]
  • Structure and Bonding of New Boron and Carbon Superpolyhedra
    Structural Chemistry (2019) 30:805–814 https://doi.org/10.1007/s11224-019-1279-5 ORIGINAL RESEARCH Structure and bonding of new boron and carbon superpolyhedra Olga A. Gapurenko1 & Ruslan M. Minyaev1 & Nikita S. Fedik2 & Vitaliy V. Koval1 & Alexander I. Boldyrev2 & Vladimir I. Minkin1 Received: 16 November 2018 /Accepted: 1 January 2019 /Published online: 10 January 2019 # Springer Science+Business Media, LLC, part of Springer Nature 2019 Abstract Using the DFT methods, we computationally predict the stability of cage compounds E4nRn (E = B, C; R = H, F; n = 4, 8, 12, 24) based on Platonic bodies and Archimedean polyhedrons in which all vertices are replaced by tetrahedral E4R fragments. Cage compounds B60R12 and C60 with pyramidal units B5RorC5 are also examined and it is shown that only boron compounds are stable. The nature of chemical bonding in the discussed compounds is analyzed using the AdNDP and NBO methods. The hydrocarbons have classical 2c-2e C-C σ-bonds, while the boron compounds are formed by the polyhedral units with the delocalized multicenter bonds which connected three and more boron atoms. The new example of spherical aromaticity accord- 2 ing to the 2(N+1) rule in the case of B16F4 with multicenter 16c-2e bonds are revealed. Stable compound B60H12 contains 12 5c- 2e B-B bonds. Keywords Сage clusters . Chemical bonding . 3c-2e bond . Spherical aromaticity . AdNDP . NBO Construction of novel allotropic forms of carbon based on was proposed [1] as the system with the same symmetry as the tetrahedrane- and cubane-like building blocks was pro- sp3-carbon to replace the carbon atoms in the diamond posed by Burdett and Lee [1] and by Johnston and lattice.
    [Show full text]
  • Group Elements
    BORON FAMILY 199 CHAPTER-5 BORON FAMILY 5.1 Introduction The group 13 of the periodic table consists of the elements boron (B), aluminium (Al), gallium (Ga), indium (In) and thallium (Tl). Except boron which is a non-metal all other elements of this group show typical metallic properties. The nonmetallic character of B is possibly due to its small size, high ionization energy and comparatively high electronegativity. 5.2 Electronic Configuration: The elements of group 13 belong to p-block elements since the last electron in them enters the p- orbital. They have in all three electrons in the valence shell, two of these are present in the s-orbital and one in the p-orbital. Therefore, their general valence shell electronic configuration is represented as ns2 np1 where n = 2 to 6. The complete electronic configuration of these elements are given in the following table. Element Atomic Number Electronic Configuration 2 1 Boron (B) 5 [He] 2s 2p Aluminium (Al) 13 [Ne] 3s23p1 Gallium (Ga) 31 [Ar] 3d10 4s24p1 Indium (In) 49 [Kr] 4d105s25p1 Thallium (T1) 81 [Xe] 4f 14 5d10 6s26p1 5.3 General Characteristics Some of these properties are discussed below: (i) Atomic and Ionic radii: The atomic and ionic radii of group 13 elements are smaller than the corresponding elements of group 2. Explanation: This is because on moving from left to right, i.e, from group 2 to group 13 in a given period the nuclear charge increases while the new electron enters the same shell. Further the electrons in the same shell do not screen each other.
    [Show full text]
  • The Ionic Conductivity in Lithium-Boron Oxide Materials and Its Relation to Structural, Electronic and Defect Properties: Insights from Theory
    Journal of Physics: Condensed Matter TOPICAL REVIEW Related content - Topical Review The ionic conductivity in lithium-boron oxide Paul Heitjans and Sylvio Indris - Double perovskites with ferromagnetism materials and its relation to structural, electronic above room temperature and defect properties: insights from theory D Serrate, J M De Teresa and M R Ibarra - How chemistry controls electron localization in 3d1 perovskites: a Wannier- To cite this article: Mazharul M Islam et al 2012 J. Phys.: Condens. Matter 24 203201 function study E Pavarini, A Yamasaki, J Nuss et al. Recent citations View the article online for updates and enhancements. - Some device implications of voltage controlled magnetic anisotropy in Co/Gd 2 O 3 thin films through REDOX chemistry Guanhua Hao et al - Lithium Diffusion Mechanisms in -LiMO2 (M = Al, Ga): A Combined Experimental and Theoretical Study Mazharul M. Islam et al - First-principles study of structural, electronic, energetic and optical properties of substitutional Cu defect in Li 2 B 4 O 7 scintillator C. Santos et al This content was downloaded from IP address 134.129.67.237 on 13/06/2018 at 22:54 IOP PUBLISHING JOURNAL OF PHYSICS: CONDENSED MATTER J. Phys.: Condens. Matter 24 (2012) 203201 (29pp) doi:10.1088/0953-8984/24/20/203201 TOPICAL REVIEW The ionic conductivity in lithium-boron oxide materials and its relation to structural, electronic and defect properties: insights from theory Mazharul M Islam1,2, Thomas Bredow1,2 and Paul Heitjans2,3 1 Mulliken Center for Theoretical Chemistry, Universitat¨
    [Show full text]
  • Direct Chemical Conversion of Graphene to Boron- and Nitrogen- and Carbon-Containing Atomic Layers
    ARTICLE Received 3 Sep 2013 | Accepted 2 Jan 2014 | Published 24 Jan 2014 DOI: 10.1038/ncomms4193 Direct chemical conversion of graphene to boron- and nitrogen- and carbon-containing atomic layers Yongji Gong1,*, Gang Shi2,*, Zhuhua Zhang2,3,*, Wu Zhou4, Jeil Jung5, Weilu Gao6, Lulu Ma2, Yang Yang2, Shubin Yang2,GeYou2, Robert Vajtai2, Qianfan Xu6, Allan H. MacDonald5, Boris I. Yakobson1,2, Jun Lou2, Zheng Liu2,7,8,w & Pulickel M. Ajayan1,2 Graphene and hexagonal boron nitride are typical conductor and insulator, respectively, while their hybrids hexagonal boron carbonitride are promising as a semiconductor. Here we demonstrate a direct chemical conversion reaction, which systematically converts the hexagonal carbon lattice of graphene to boron nitride, making it possible to produce uniform boron nitride and boron carbonitride structures without disrupting the structural integrity of the original graphene templates. We synthesize high-quality atomic layer films with boron-, nitrogen- and carbon-containing atomic layers with full range of compositions. Using this approach, the electrical resistance, carrier mobilities and bandgaps of these atomic layers can be tuned from conductor to semiconductor to insulator. Combining this technique with lithography, local conversion could be realized at the nanometre scale, enabling the fabrication of in-plane atomic layer structures consisting of graphene, boron nitride and boron carbonitride. This is a step towards scalable synthesis of atomically thin two-dimensional integrated circuits. 1 Department of Chemistry, Rice University, Houston, Texas 77005, USA. 2 Department of Materials Science and NanoEngineering, Rice University, Houston, Texas 77005, USA. 3 State Key Laboratory of Mechanics and Control of Mechanical Structures and Key Laboratory of Intelligent Nano Materials and Devices of MoE, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China.
    [Show full text]
  • Phase Diagram of Boron Is Constructed
    Synthesis and investigation of boron phases at high pressures and temperatures DISSERTATION zur Erlangung des akademischen Grades eines Doktors der Naturwissenschaften (Dr. rer. nat.) an der Bayreuther Graduiertenschule für Mathematik und Naturwissenschaften (BayNAT) der Universität Bayreuth vorgelegt von Gleb Parakhonskiy aus Twer Bayreuth, 2012 TABLE OF CONTENTS SUMMARY ............................................................................................................................... 4 ZUSAMMENFASSUNG ........................................................................................................... 6 1 INTRODUCTION ................................................................................................................ 9 1.1 Motivation and background ........................................................................................... 9 1.2 Elemental boron modifications .................................................................................... 11 1.2.1 α-boron .................................................................................................................... 11 1.2.2 β-boron .................................................................................................................... 12 1.2.3 The controversy on the ground state of boron and a relative stability of the two modifications (α-B and β-B) at ambient conditions ......................................................... 14 1.2.4 γ-boron ...................................................................................................................
    [Show full text]
  • The Elements.Pdf
    A Periodic Table of the Elements at Los Alamos National Laboratory Los Alamos National Laboratory's Chemistry Division Presents Periodic Table of the Elements A Resource for Elementary, Middle School, and High School Students Click an element for more information: Group** Period 1 18 IA VIIIA 1A 8A 1 2 13 14 15 16 17 2 1 H IIA IIIA IVA VA VIAVIIA He 1.008 2A 3A 4A 5A 6A 7A 4.003 3 4 5 6 7 8 9 10 2 Li Be B C N O F Ne 6.941 9.012 10.81 12.01 14.01 16.00 19.00 20.18 11 12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 3 Na Mg IIIB IVB VB VIB VIIB ------- VIII IB IIB Al Si P S Cl Ar 22.99 24.31 3B 4B 5B 6B 7B ------- 1B 2B 26.98 28.09 30.97 32.07 35.45 39.95 ------- 8 ------- 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 4 K Ca Sc Ti V Cr Mn Fe Co Ni Cu Zn Ga Ge As Se Br Kr 39.10 40.08 44.96 47.88 50.94 52.00 54.94 55.85 58.47 58.69 63.55 65.39 69.72 72.59 74.92 78.96 79.90 83.80 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 5 Rb Sr Y Zr NbMo Tc Ru Rh PdAgCd In Sn Sb Te I Xe 85.47 87.62 88.91 91.22 92.91 95.94 (98) 101.1 102.9 106.4 107.9 112.4 114.8 118.7 121.8 127.6 126.9 131.3 55 56 57 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 6 Cs Ba La* Hf Ta W Re Os Ir Pt AuHg Tl Pb Bi Po At Rn 132.9 137.3 138.9 178.5 180.9 183.9 186.2 190.2 190.2 195.1 197.0 200.5 204.4 207.2 209.0 (210) (210) (222) 87 88 89 104 105 106 107 108 109 110 111 112 114 116 118 7 Fr Ra Ac~RfDb Sg Bh Hs Mt --- --- --- --- --- --- (223) (226) (227) (257) (260) (263) (262) (265) (266) () () () () () () http://pearl1.lanl.gov/periodic/ (1 of 3) [5/17/2001 4:06:20 PM] A Periodic Table of the Elements at Los Alamos National Laboratory 58 59 60 61 62 63 64 65 66 67 68 69 70 71 Lanthanide Series* Ce Pr NdPmSm Eu Gd TbDyHo Er TmYbLu 140.1 140.9 144.2 (147) 150.4 152.0 157.3 158.9 162.5 164.9 167.3 168.9 173.0 175.0 90 91 92 93 94 95 96 97 98 99 100 101 102 103 Actinide Series~ Th Pa U Np Pu AmCmBk Cf Es FmMdNo Lr 232.0 (231) (238) (237) (242) (243) (247) (247) (249) (254) (253) (256) (254) (257) ** Groups are noted by 3 notation conventions.
    [Show full text]
  • The Periodic Table Is a List of All the Known Elements. It Is Organized by Increasing Atomic Number
    The Periodic Table is a list of all the known elements. It is organized by increasing atomic number. There are two main groups on the periodic table: metals and nonmetals. The left side of the table contains elements with the greatest metallic properties. As you move from the left to the right, the elements become less metallic with the far right side of the table consisting of nonmetals. The elements in the middle of the table are called “transition” elements because they are changed from metallic properties to nonmetallic properties. A small group whose members touch the zigzag line are called metalloids because they have both metallic and nonmetallic properties. The table is also arranged in vertical columns called “groups” or “families” and horizontal rows called “periods.” Each arrangement is significant. The elements in each vertical column or group have similar properties. Group 1 elements all have the electron in their outer shells. This gives them similar properties. Group 2 elements all have 2 electrons in their outer shells. This also gives them similar properties. Not all of the groups, however, hold true for this pattern. The elements in the first period or row all have one shell. The elements in period 2 all have 2 shells. The elements in period 3 have 3 shells and so on. There are a number of major groups with similar properties. They are as follows: Hydrogen: This element does not match the properties of any other group so it stands alone. It is placed above group 1 but it is not part of that group.
    [Show full text]
  • Reversible Silver Electrodeposition from Boron Cluster Ionic Liquid (BCIL) Electrolytes
    Reversible Silver Electrodeposition from Boron Cluster Ionic Liquid (BCIL) Electrolytes †,# †,# ‡ ‡ §, Rafal M. Dziedzic, Mary A. Waddington, Sarah E. Lee, Jack Kleinsasser, John B. Plumley, ⊥ William C. Ewing,| Beth D. Bosley,,* Vincent Lavallo,‡,* Thomas L. Peng,§,* Alexander M. Spokoyny.†,∇,* †Department of Chemistry and Biochemistry, University of California, Los Angeles, 607 Charles E. Young Drive East, Los Angeles, CA 90095, United States ‡ Department of Chemistry and Biochemistry, University of California, Riverside, 501 Big Springs Rd., Riverside, CA 92521, United States §Air Force Research Laboratory, Kirtland AFB, New Mexico, United States, Albuquerque, NM 87123, United States ⊥Department of Chemistry and Chemical Biology, University of New Mexico, 300 Terrace St. NE, Albuquerque, NM 87131, United States ǁBoron Specialties LLC, 2301 Duss Avenue, Building 9, Ambridge, PA 15003, United States ∇California NanoSystems Institute (CNSI), University of California, Los Angeles, 570 Westwood Plaza, Los Angeles, CA 90095, United States Supporting Information Placeholder ABSTRACT: Electrochemical systems offer a versatile means for creating adaptive devices. However, the utility of electrochemical dep- osition is inherently limited by the properties of the electrolyte. The development of ionic liquids enables electrodeposition in high-vacuum environments and presents opportunities for creating electrochemically adaptive and regenerative spacecraft components. In this work we developed a silver-rich, boron cluster ionic liquid (BCIL) for reversible electrodeposition of silver films. This air and moisture stable elec- trolyte was used to deposit metallic films in an electrochemical cell to tune the emissivity of the cell in situ, demonstrating a proof-of- concept design for spacecraft thermal control. Keywords: Reversible electrodeposition, ionic liquids, infrared transparent electrochemical cell, boron clusters Figure 1 Electrodeposited metallic structures are ubiquitous in modern A B technologies (e.
    [Show full text]