2007Alcoholfunnycar

Total Page:16

File Type:pdf, Size:1020Kb

2007Alcoholfunnycar 22000077 AALLCCOOHHOOLL FFUUNNNNYY CCAARR Chassis Base Price Sheet 125” Wheelbase 4130 Chassis Anti Rotation Bracket Assembly with Chute Meets SFI Specs & NHRA Rules Mount Pins (Steel) CAD & FEA Designed Pro Jack Tabs on Rear 6 Point Rollcage with SFI Cage Padding Brake Handle with Fire Bottle Lever 1” Cage Liners in Rollcage Strange Dual Inline Master Cylinder & Seat Belt Mounts Reservoir Bolt On or Weld On A-Arms Brake Hard Lines Plumbed Strange Aluminum Adjustable Spindles Fire Bottle System Mounts and Mechanical McKinney Billet Steering Arms Linkage Steering Box with all 4130 Rod Ends Fire Bottle Hard Lines Plumbed McKinney SFI Quick Release Steering Hub & Fuel Shut Off Lever Assembly (Aluminum) Steering Wheel Oil Filter Mount Frame Slots & Line Tabs All Switches, Gauges and Components Frame Rail Drains Mounted (Steering Dash Extra) Burndown Fittings Front & Rear Air Bottle Mount & Clamp (Aluminum) Front Weight Bar Fresh Air Bottle Mount & Clamps (Aluminum) Rear Motor Plate (1) 6061 Coil & Point Box Mount Front Motor Plate (1 pr.) Aluminum Blower Belt Guard Chassis Tin (Engine Pan & Pockets Extra) Throttle Pedal Assembly Custom Built Seat (Pockets Extra) All Cables & Hardware Bellhousing Shroud Blow Back Struts Rear End Plates (1 pr.) Complete Assembly of Chassis Manufactures Tag on Chassis Base Price $20,500.00 See Option Sheet for additional items and Body Mounting. Terms: 50% Deposit at time of order and balance due upon delivery. All prices subject to change without notice. 1-800-542-3088 765-448-4800 4710 Fastline Drive Lafayette IN 47906 www.mckinneycorp.com 22000077 AALLCCOOHHOOLL FFUUNNNNYY CCAARR Chassis Price with Options Dry Sump Tank (installed) $985.00 Burndown Tank (Rd. Aluminum wo/Drip Pan) $975.00 Steering Dash Panel for Tach & Gauges $425.00 Clutch Pedal Assembly - Compound (Titanium Bellhousing) $525.00 Firefox Fire Bottle System $995.00 FireFox Fire Bottle System w/ Nitrogen Assist……………….. $1,550.00 FireFox Nozzles Only (NO Bottles)……………………………… $137.50 Single Wheelie Bar $875.00 Single Wheelie Bar -w/ Adjustable RH & LH Thread (Steel)…. $1,000.00 Single Wheelie Bar 60" (Titanium)………………………………………… $2,605.00 Single Wheelie Bar 60"-w/ Adjustable RH & LH Thread (Titanium) $2,900.00 Dual Wheelie Bar $1,000.00 Install Ti Rear Deflector Shield behind Seat………………… $910.00 Pocketed Seat (Add)……………………………………………… $165.00 Six Way Lap Belt Installation…………………………………… $245.00 Engine Bellypan - Aluminum - w/o Carbon Oil Pump Bumps…...…………… $385.00 Engine Bellypan w/Carbon Oil Pump Bumps…...…...………… $550.00 Engine Bellypan - Carbon Fiber - w/o Oil Pump Bump…...…………… $2,175.00 Engine Bellypan - Carbon Fiber - w/ Oil Pump Bump…...…...………… $2,350.00 Titanium Rear Tree Assembly (Add)…………………………………………….. $2,500.00 Mount Clutch Box, P-Tank, Fresh Air Bottle & Misc Tabs on Ti. Tree $550.00 Additional Control Cables & Levers (ea) $137.50 Spare Fuel Tank $800.00 Spare Dry Sump Tank $750.00 Spare Rear Motor Plate (Aluminum)(ea) $355.00 Additional Front Motor Plates (pr) with Saddles (steel) $165.00 Additional Rear End Plates (pr) $220.00 Anodize Chassis Components (PLUS Freight) $700.00 NHRA Approved Seat Pad $385.00 Computer Box & Mounting $495.00 Rear Weight Bar $185.00 Titanium Bolt Package $1,320.00 Dust Tube Assembly $210.00 Main Fuel Lines $250.00 Dry Sump Lines $175.00 Mag Bracket Option ( All Mag Clamps) $137.50 1-800-542-3088 765-448-4800 4710 Fastline Drive Lafayette IN 47906 www.mckinneycorp.com .
Recommended publications
  • 1. the Future for Automotive Two-Stroke Engines – Part 2
    N0.21 THE FUTURE FOR AUTOMOTIVE TWO-STROKE ENGINES (Part 2) CURRENT DEVELOPMENTS Synthetic-based formulation likely to be the preferred option. In the previous issue of Lube, the origins and initial development of the 2T Tendency for combustion chamber deposit formation would have required a engine were described. The earlier engines, characterised by smoky exhausts low ash or ash less lubricant. and poor specific fuel economy, will be remembered by many of the older High temperatures require strong anti-oxidancy. fraternity, as they provided motive power for many commuter lightweight motorcycles, mopeds and scooters in the prewar and postwar years. Many WET SUMP vehicle manufacturers in the UK used proprietary power units manufactured Again, no valve train therefore no requirement for e.g. ZDDP anti-wear by specialist engine manufacturers such as Villiers, who dominated the agent. market, although smaller engine suppliers included companies such as British Diluent unnecessary/undesirable. Anzani. A number of other companies, including Scott, Associated Conventional base oil plus viscosity index-improver is possible (SAE 10/30?). Motorcycles, Excelsior and latterly Ariel also designed their own engines, use Polymer deposits may favour synthetic approach. of which was restricted in the main to vehicles of their own manufacture. However, with the demise of the UK motorcycle industry, 2T engine Tendency for combustion chamber deposits requires a low ash approach. developments, which have progressed steadily during subsequent years, The conclusion was that, in spite of the substantial differences between the have been largely attributable to overseas manufacturers with assistance types of the Orbital engines described above, it may well have been possible from some UK specialist consultancy organizations such as Ricardos at to meet the requirements of both types of engine with a single lubricant, Shoreham.
    [Show full text]
  • Mitsubishi Evolution 4 to 9 4G63 DOHC Engine Dry Sump Installation Guide
    Mitsubishi Evolution 4 to 9 4G63 DOHC Engine Dry Sump Installation Guide Mitsubishi Evo 4G63 DOHC Dry Sump Kit Installation Guide Thank you for purchasing the Pace Products dry sump kit for the Mitsubishi Evo. The kit is designed for the 4G63 engine as fitted to the Mitsubishi Evo 4 through to 9, from standard tune engines to high power special installations. It features a high strength cast aluminium sump, machined billet aluminium front cover and our well proven BG 3 stage oil pump. The pump is mounted externally to the engine and is bolted to the exhaust side of the engine block via a mounting bracket and is powered by a toothed rubber belt. Our kit is a bolt on solution requiring no modifications of standard engine components. The kit has been tested and developed using Automotive Performance Tuning’s 700hp Mitsubishi Evo time attack car. If you have any comments on this kit or would like additional information on the Pace Products range of kits and components please call 01440 760960 or email [email protected] - 2 - Pace Products Ltd. Issue D, 05th April 2011. Disclaimer No warranty is offered or inferred on this product. Fitment of this product may invalidate the manufactures’ warranty, please check before. Please note there are some minor differences on later 4G63 engines, primarily effecting sump fitment. Whilst every effort has been made to accommodate these, some modifications may be required to ensure correct fitment to your engine. These depend on your engine variant and specification, particularly if using an aftermarket crankshaft cradle and con rod stud kit.
    [Show full text]
  • BOSE , CUTTACK 1. Mist Lubrication System
    BOSE , CUTTACK CHAPTER-06 LUBRICATION SYSTEM IN AUTOMOBILE Functions of lubricating oil: A good lubricating oil should perform the following function. · It reduces the friction between the moving parts. · It cools the piston so it also acts as a cooling medium. · It also prevents the leakage of gas between the piston and cylinder because it makes a film of lubricant between them. · It also reduces the noise between the rubbing surfaces. The various lubrication systems used for lubricating the various parts of engine are classified as 1. Mist lubrication system 2. Wet sump lubrication system, and 3. Dry sump lubrication system. 1. Mist lubrication system: Mist lubrication system is a very simple type of lubrication. In this system, the small quantity of lubricating oil (usually 2 to 3%) is mixed with the fuel (preferably gasoline). The oil and fuel mixture is introduced through the carburetor. The gasoline vaporized and oil in the form of mist enters the cylinder via the crank base. The droplets of oil strike the crank base. The droplets of oil strike the crank base, lubricate the main and connecting rod bearings and the rest of the oil lubricates the piston, piston rings and cylinder. The system is preferred in two stroke engines where crank base lubrication is not required. In a two-stroke engine, the charge is partially compressed in a crank base, so it is not possible to have the oil in the crank base. This system is simple, low cost and maintenance free because it does not require any oil pump, filter, etc. However, it has certain serious disadvantages.
    [Show full text]
  • Compliance-Packet-1.Pdf
    D All-wheel drive la"Restrictor plate D Adjustable engine management D Dry sump oil system D Mechanically-adjustable throttle stop D Electronically-adjustable throttle • Accusump or other in-car system capable of adding or removing engine oil D Any form of wireless connection to the ECU or engine management system Adjustable engine management declaration If this car has "adjustable engine management system", including multiple maps, either engaged manually or triggered automatically by wheel speed sensors, acceleration, etc. as defined by section 5.2 of the GTS rules, please complete this section. System name/type Nl f\ Description--~------------------------ Method of adjustment ________________________ Settings used for this dyno run and how to verify at the track ___________ Variable boost declaration If this car has variable boost capabilities, please complete this section. Means of adjustment /J Ifr Settings used for this dyno run and how to verify at the track ___________ Restrictor plate declaration If this car requires a restrictor plate or other intake-restricting device of any kind to produce the figures from this dyno run, please complete this section. Detailed description of the restricting device, including pertinent dimensions ~ YY1 ro \J ~ koo P:immQt:½2odd ~ G"=&-l u.r(;od&C 'R~c:bzc :Pl~ Instructions on how to verify this at the track TI- Ls ]0 oJeJ be-beQ,V\.~ %0?\U:e, \»Ly d,JV\cl'\be I v11J;.e, rro¥11~ fd 1 Throttle stop declaration If this vehicle requires the use of either a mechanical throttle stop or an electronic throttle limit to achieve the numbers shown on this dyno sheet, please complete this section.
    [Show full text]
  • Mike Mavrigian Dry Sump Oil Systems Offer a Number of Advantages Over
    Performance Perspectives Dry sump oil systems offer a number of advantages over conventional oiling systems. They also are finding their way into more and more high-end performance engine builds. riginal equipment engines, as A dry sump oil system (so-called because well as a large number of race the oil pan does not store the oil) provides a engines, feature what’s called more efficient and direct approach. An exter- a wet sump oil system that de- nally mounted oil pump takes advantage of ex- livers pressurized oil to the ternal plumbing to directly deliver oil to the Mike main oil gallery. Oil is stored engine. The dry sump pan serves only as a Mavrigian in the oil pan sump and is picked up by a me- containment cover and as a location from Ochanically driven oil pump. The pump fea- which oil can be returned to the reservoir. The [email protected] tures a screened pickup that’s submerged in oil reservoir (the oil supply) is a remote con- the sump’s oil reservoir. The pump is mechan- tainer that can be mounted in the cockpit, en- ically driven by either the camshaft-driven dis- gine bay or other convenient location in a race tributor, by the cam itself or by the crank vehicle. In basic terms, the external pump snout, depending on the engine type. The pulls oil from the remote reservoir, then push- pump pressurizes the oil, sending it through es it (under pressure) to wherever directed by the main gallery, and subsequently to all bear- the plumbing.
    [Show full text]
  • LUBRICATION SYSTEM in IC ENGINES Definition of Lubrication
    LUBRICATION SYSTEM IN IC ENGINES Definition of lubrication Lubrication is the action of applying a substance such as oil or grease to an engine or component so as to minimize friction and allow smooth movement. Lubrication System Lubricating system is a mechanical system of lubricating internal combustion engines in which a pump forces oil into the engine bearings. PURPOSE OF LUBRICATION ➢ To reduce the friction between moving parts ➢ To increase the efficiency ➢ To minimize the vibrations ➢ To reduce the corrosion and carbon deposits ➢ To reduce the heat of moving parts ➢ To minimize power loss due to friction ➢ To reduce the noise created by moving parts ➢ To provide cooling to the engine TYPES OF LUBRICANTS ➢SOLID LUBRICANTS ❑ e.g. graphite ,molybdenum ,mica ➢ SEMI-SOLID LUBRICANTS ❑ e.g. heavy greases ➢ LIQUID LUBRICANTS ❑ e.g. mineral oil obtained by refining petroleum. PROPERTIES OF LUBRICANTS ➢ Viscosity ❑ It is a measure of the resistance to flow of an oil ❑ It is measured in saybolt universal seconds (SUS) ❑ It is expressed in centistokes ,centipoises and redwood seconds ➢ Viscosity Index ❑ viscosity of oil decreases with increase in temperature ➢ Cloud point ❑ If an oil is cooled , it will start solidifying at some time . ❑ Temperature at which oil starts solidifying , is called cloud point PROPERTIES OF LUBRICANTS ➢Pour point ❑ It is temperature just above which the oil sample will not flow under certain prescribed conditions ❑ this property is important for operation of engines and substances at low temperature conditions ➢ Flash point and Fire point ❑ The temperature at which vapour of an oil flash when subjected to a naked flame is called flash point ❑ Fire point is the temperature at which the oil ,it once lit with flame ,will burnt steadily at least for 5 seconds ➢ Specific Gravity ❑ It varies between 0.85 to 0.96 SAE Number • Society of Automotive Engineer has recommended SAE viscosity number for lubricating oils.
    [Show full text]
  • Disadvantages of Dry Sump Lubrication System
    DISADVANTAGES OF DRY SUMP LUBRICATION SYSTEM ➢ Dry-sump systems add cost, complexity, and weight ➢ The extra pumps and lines in dry-sump engines require additional oil and maintenance ➢ The large external reservoir and pumps can be tricky to position around the engine and within the engine bay due to their size ➢ Inadequate upper valvetrain lubrication can also become an issue if too much oil vapor is being pulled out from the area, especially with multi-staged pumps Cooling System NECESSITY OF COOLING SYSTEM The cooling system is provided in the IC engine for the following reasons: • The temperature of the burning gases in the engine cylinder reaches up to 1500 to 2000°C, which is above the melting point of the material of the cylinder body and head of the engine. • Therefore, if the heat is not dissipated, it would result in the failure of the cylinder material. • Due to very high temperatures, the film of the lubricating oil will get oxidized, thus producing carbon deposits on the surface. This will result in piston seizure. • Due to overheating, large temperature differences may lead to a distortion of the engine components due to the thermal stresses set up. • This makes it necessary for, the temperature variation to be kept to a minimum. Cooling System REQUIREMENTS OF EFFICIENT COOLING SYSTEM The two main requirements of an efficient cooling system are: • It must be capable of removing only about 30% of the heat generated in the combustion chamber. • Too much removal of heat lowers the thermal efficiency of the engine. • It should remove heat at a fast rate when the engine is hot.
    [Show full text]
  • About Katech
    2014 Contents About Katech 2 About Katech About Katech Performance 3 C7 Corvette 6 In an industry that defines success one lap at a time, Katech has Street Attack Corvette Z06 8 earned the trust and respect of racing’s toughest competitors – lap, ClubSport Corvette Z06 11 after lap, after lap – by providing responsive service and expert skill Track Attack Corvette Z06 12 to factory and privateer race efforts. C6 Z06 Corvette 14 C6 ZR1 Corvette 15 Since 1977, Katech Inc. has captured more than 60 driver’s and C6 Corvette 16 manufacturer’s championships competing in the world’s most C5/C5 Z06 Corvette 17 prestigious racing leagues, including the American Le Mans Camaro LS3 2010+ 18 Series (ALMS), NASCAR®, SCCA SPEED World Challenge, Camaro L99 2010+ 19 American Speed Association (ASA), and International Motor Sports Gen 5 Camaro ZL1, Z28 20 Association (IMSA). Katech’s legacy is also deeply rooted in 12 SS, V2 CTS-V 21 Hours of Sebring, 24 Hours of Daytona and 24 Hours of Le Mans. Camaro, Firebird, GTO & CTS-V 22 Other Vehicles 22 Today Katech is an industrial leader in advanced racing and high Trailblazer SS 23 performance engine development, manufacturing, testing and Crate Engines 25 assembly. Katech offers support services for the professional and Body, Aero & Styling 33 private racer including boring, honing, fabrication, welding and Wheels 37 prototype parts development. Driveline 38 Engine Components 39 Camshafts & Valvetrain 41 Oiling System 42 Fuel Systems 43 Front Drive & Cooling 44 Color Code Legend Valve Covers 45 The bottom
    [Show full text]
  • Oil Pumps & Dry Sump Systems Oil Filters & Adaptors Tie
    TIE RODS & DRAG LINKS OIL FILTERS & ADAPTORS REDLINE RACING OIL Racing oils provide more wear protection than motor oils for XXX Chromoly Tie Rods passenger vehicles, however, K&N Oil Filters these products contain fewer 1-1/8” plated 4130 chromoly • Drilled safety wire holes for racing detergents and are not suitable available in 46” -50” lengths • 1” hex nut makes removal quick and easy for street use welded 5/8” spud ends • Metal leaf spring provides a positive seal between element and lid • Reformulated for improved 46” Chrome Tie Rod TXRC-SC-SU-0212 • Inner core provides extra structural support to prevent filter collapse. frictional properties 48” Chrome Tie Rod TXRC-SC-SU-0203 Small Block Chev – Std Length KNHP-3002 49” Chrome Tie Rod TXRC-SC-SU-0205 • Special detergents for improved lubricity and less detonation • Polyol ester base stocks provide more stability and film strength 50” Chrome Tie Rod TXRC-SC-SU-0206 K&N Oil filters are available for most makes & models. when exposed to excess fuel dilution For more information please ring ROCKET. • Each of these products has no less than 2200ppm of zinc and phosphorus for antiwear Description Part No. 40WT Race Oil (15W40) 40WT Race Oil 1 Quart (946 ml) RED10404 Black Chromoly Tie Rods 40WT Race Oil 1 Gallon (3.785 Liters) RED10405 1-1/8” plated 4130 chromoly available in 46” -50” lengths with 50WT Race Oil (15W50) welded 5/8” spud ends 50WT Race Oil 1 Quart (946 ml) RED10504 46” Black Tie Rod BHR069 50WT Race Oil 1 Gallon (3.785 Liters) RED10505 48” Black Tie Rod BHR071 50WT Race Oil 5 Gallon (18.93 Liters) RED10506 49” Black Tie Rod BHR072 50” Black Tie Rod BHR073 Drag Link Strap ENGINE OIL FILTERS This strap keeps your Aeroflow oil filters have been designed to incorporate all the latest CAM DRIVE drag link in place technology to provide great filtration with minimal restriction so Front cam drive for SBC with 1/2” during an accident.
    [Show full text]
  • Pre-Oiling Engine Prior to Initial Start
    652 Oliver Street Williamsport, PA. 17701 U.S.A. SERVICE Tel. 570-323-6181 Fax. 570-327-7101 www.lycoming.textron.com INSTRUCTION DATE: April 18, 1997 Service Instruction No. 1241C (Supersedes Service Instruction No. 1241B) Engineering Aspects are FAA Approved SUBJECT: Pre-Oiling Engine Prior to Initial Start MODELS AFFECTED: All Textron Lycoming engines. TIME OF COMPLIANCE: Prior to initial start after engine change, overhaul, oil cooler replacement or draining or any prolonged period of inactivity. To avoid possible high speed bearing failure resulting from lack of lubrication during initial starts all aircraft engines should be pre-oiled prior to first start. Engines need not be pre-oiled after an oil change or whenever the oil lines have been disconnected. However, on dry sump engines after an oil change or whenever the oil lines have been disconnected it will be necessary to disconnect the oil inlet connection at the oil pump and drain a sufficient amount of oil from the tank to be certain there are no obstructions or air in the inlet line to the oil pump. The following procedure is intended to apply to wet sump and dry sump engines. 1. Fill the oil tank or sump to the proper level. In all turbocharged engines use only ashless dispersant oil conforming to specification MIL-L-22851 or SAEJ1899. 2. External oil tanks and turbocharged engines. a. On engines with external oil tanks, disconnect the oil inlet connection at the oil pump and drain a sufficient amount of oil to eliminate any possible obstructions or air in the inlet passage.
    [Show full text]
  • Designing a Dry-Sump Oiling System Reliable Oil Supply, Lower Cofg, with an Increase in Horsepower
    PROJECT S2000 TECH STORY ANDREW WOJTECZKO PHOTOS SCOTT PHILIPPS AND ANDREW WOJTECZKO Designing a Dry-Sump Oiling System Reliable oil supply, lower CofG, with an increase in horsepower ry-sump oiling sys- dry-sump system. Because the bulk of tems o er numerous the engine oil is no longer being stored advantages, including in the sump of the oil pan, the pan can Dimproved engine reliability be very shallow, allowing our engine to and longevity, the ability to lower the sit 1.25 inches lower. engine for improved handling dynamics Scavenge stages built into the oil while reducing crankcase pressures, pump evacuate oil from the pan and and the possibility of an increase in create a vacuum in the crankcase. This power output. vacuum ensures no more issues with The improved reliability comes from excessive crankcase pressure lling the remote-mounted oil reservoir, up catch cans when on track. Finally, which is designed to be tall and slender, power gains are often seen as a result ensuring that no matter how much of the vacuum generated in the pan lateral or longitudinal acceleration is causing an improvement in piston ring The ARE generated, a fresh supply of air-free oil sealing and reduced friction. Gains of 3 Engineering), a leader in dry-sump kit includes is always being fed to the engine. Con- to 5 percent seem to be reasonable. engine system development and manu- everything you stant oil supply means reduced bearing Scouring the Internet reveals limited facturing, to develop a dry-sump setup ned (les hoses wear and increased engine longevity.
    [Show full text]
  • 2014-15 Camaro Z-28 Stage II Intercooled System Installation Guide © 2016 Accessible Technologies, Inc
    2014-15 Camaro Z-28 Stage II Intercooled System Installation Guide © 2016 Accessible Technologies, Inc. Accessible Technologies, Inc. 14801 W. 114th Terrace Lenexa, KS 66215 Phone: 913.338.2886 Fax: 913.338.2879 [email protected] All rights reserved. Accessible Technologies Inc. hereby grants permission to use and reproduce this document for personal use, provided that all copyright information be retained. Reproduction of this document for unauthorized commercial use is strictly prohibited. Information in this document is subject to change without notice. ProCharger is a registered trademark and The Intercooled Supercharging Experts!TM and Designed to Blow Away the CompetitionTM are trademarks of Accessible Technologies, Inc. and may not be used without express permission. You should also have the following gauges available to properly check the finished installation and monitor your vehicle’s performance (especially for testing): • Manifold Boost Pressure Gauge • Fuel Pressure Gauge • Wide Band Oxygen Sensor and Gauge Gauges should be of a type that can be read from the cockpit while performing a wide-open throttle road test. Cockpit or hood-mounted gauges are preferable. In order to obtain usable readings, the gauges should measure pressure at the intake manifold and fuel rail. IF VEHICLE DOES NOT MAINTAIN PROPER FUEL PRESSURE (50-65 PSI), DECREASE THROTTLE APPLICATION IMMEDIATELY. In some cases, extra vehicle modifications can strain the stock fuel pump. If your vehicle has difficulty retaining adequate fuel pressure, contact ATI ProCharger about the availability of an upgraded fuel system. The engine on which the ProCharger® is to be installed should retain the factory compression ratio. If it has been modified in any way, please consult ProCharger staff before proceeding with the installation.
    [Show full text]