DOCSLIB.ORG

Wood Rim Steering Wheels

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Wood Rim Steering Wheels +44(0) 1885 488 488 WWW.HOLDEN.CO.UK WOOD RIM STEERING WHEELS MOTO-LITA have been designing and making custom steering wheels since the 1950s. AC Cars, Aston Martin, Cooper Car Co., Caterham, Jensen, Lister, Lola, MG, Opel, Panther, Rolls- Royce, Rover, Saab, Shelby Mustang, Triumph, TVR and Vauxhall are some of the companies who have chosen MOTO-LITA steering wheels for their quality, enhanced driving comfort and good looks. MOTO-LITA steering wheels are designed and hand built in England by British craftsmen. The centres of Moto-Lita’s steering wheels are hewn from a sold billet of aluminium. With this in mind we’re afraid that you might have to wait a while if you order a 16” wheel and it’s not in stock. The solid cylinder of aluminum is very heavy and they don’t like picking it up and putting onto their cutting saw to make only one wheel! 16” wheels are made to order only LIGHTING Unless stated, for all of these steering wheels you will need a boss to fit it to your car. Please see following pages for details SWITCHES The original classic British Wood Rim Steering Wheel. Built from selected cross-laminated wood which is bonded and IGNITION rivetted to a one piece, heavy gauge, hand polished, aluminium alloy frame. The underside of the rim has 36 carved WIRING fnger notches. The rim is fnished in a hardwearing deep lustre which is resistant to petrol, oil and the elements HEATERS, ELECTRIC FANS FUEL AIR GAUGES WASHERS WIPERS MIRRORS SEATS, SEAT MARK THREE DRILLED SPOKES MARK THREE WITH SLOTS MARK THREE TEARDROP SLOTS BELTS Flat wheels: Flat wheels: Flat wheels: STEERING Dia (mm) Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT WHEELS 330(13”) 090.053 £170.40 £142.00 330(13”) 090.063 £170.40 £142.00 356(14”) 090.670 £170.40 £142.00 356(14”) 090.054 £170.40 £142.00 356(14”) 090.064 £170.40 £142.00 381(15”) 090.671 £170.40 £142.00 MOTORCYCLE 381(15”) 090.055P £170.40 £142.00 381(15”) 090.065 £170.40 £142.00 Dished wheels: PARTS 406(16”) 090.056 £284.52 £237.10 Dished wheels: Dia (mm) Part No. Price each ex VAT ACCESSORIES Dished wheels: Dia (mm) Part No. Price each ex VAT 356(14”) 090.672 £170.40 £142.00 Dia (mm) Part No. Price each ex VAT 330(13”) 090.066 £170.40 £142.00 381(15”) 090.673 £170.40 £142.00 BODY 330(13”) 090.057 £170.40 £142.00 356(14”) 090.067 £170.40 £142.00 HARDWARE 356(14”) 090.058 £170.40 £142.00 381(15”) 090.068 £170.40 £142.00 CAR CARE 381(15”) 090.059 £170.40 £142.00 PAINT 406(16”) 090.060 £273.60 £228.00 OIL, GREASE FITTINGS WHEELS, BRAKES TOOLS COMPETITION CLOTHING GIFTS DERRINGTON SLOT DERRINGTON - JAGUAR CLASSIC FOUR SPOKE BOOKS With slots in the spokes. Flat wheels: Dia (mm) Part No. Price each ex VAT Classic four spoke. Like the Bentley Boys wheels! As originally supplied by Moto-Lita to VW Derrington Laminated wood and rivetted rim 381 (15”) 090.628 £207.60 £173.00 for the Jaguar Mk II. Three plain spokes. The underside of the rim has 36 finger notches. It comes 406 (16”) 090.629 £279.60 £233.00 complete with aluminium alloy boss and you refit the Flat wheels only: original horn ring. Made to special order, allow time for delivery VW Derrington was an aftermarket company supply- Dia (mm) Part No. Price each ex VAT ing bolt-on-goodies in the classic era. Moto-Lita made 356(14”) 090.050 £220.99 £184.16 Steering Wheels for them in period. Their particular feature is equally spaced spokes Dia (mm) Part No. Price each ex VAT 381(15”) 090.051 £220.99 £184.16 406(16 in) 090.629JAG £393.60 £365.00 406(16”) 090.052 £297.76 £248.13 PRICES CORRECT AT SEPTEMBER 2018 FOR LATEST PRICES REFER TO WEBSITE WWW.HOLDEN.CO.UK +44 (0) 1885 488 488 199 WOOD RIM STEERING WHEELS +44(0) 1885 488 488 LIGHTING SWITCHES ASTON MARTIN REPLICA AC COBRA REPLICA JAGUAR ‘E’ TYPE REPLICA IGNITION A true replica of the Aston Martin DB2/3/4/5/6 steer- True replicas of the works Jaguar ‘E’ Type wheel as WIRING A true replica of the original AC Cobra split centre 1 ing wheel. Flat wheel only. Fits the Moto-Lita bosses fitted as original equipment for Series 1 & 1 ⁄2 cars. steering wheel. Fits the Moto-Lita boss below or the below or the original boss on the car. 406mm (16”) Fits the Moto-Lita boss below or the original boss on original Cobra boss. Includes top plate and screws HEATERS, diameter. Holes not c/sunk. the car. Flat wheels only ELECTRIC FANS Finish Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT FUEL AIR Black 090.953 £358.80 £299.00 381 (15”) 090.954 £316.80 £264.00 381(15”) 090.061 £297.76 £248.13 GAUGES Polished 090.957 £358.80 £299.00 406(16”) 090.062 £288.00 £240.00 WASHERS WIPERS MIRRORS SEATS, SEAT BELTS STEERING BOSSES FOR ASTON MARTINS BOSS FOR AC COBRA BOSS & HORN PUSH WHEELS FOR JAGUAR E TYPE Boss for above Steering Wheels for Aston Martin Boss for above Steering Wheel for AC Cobra. There is DB2/3/4. Horn Control is provided with this boss MOTORCYCLE no provision for a Horn Control in the centre (shown) PARTS Boss for above Steering Wheels. Made from billet aluminium and highly polished, fits original E Type Part No. Price each ex VAT Part No. Price each ex VAT column. Takes OE (Original Equipment) horn control or ACCESSORIES you can use the special Jaguar horn control below 098.B7H £91.20 £76.00 098.B25 £63.60 £53.00 BODY HARDWARE Part No. Price each ex VAT Boss for above Steering Wheels for Aston Martin DB5 CAR CARE and DB6. Horn Control is provided with this boss 090.596 £126.00 £105.00 PAINT Part No. Price each ex VAT Horn Push, together with Boss 090.596 this is for use OIL, GREASE with Steering Wheels 090.061 and 090.062 above 098.B49A/9H £78.00 £65.00 FITTINGS Part No. Price each ex VAT WHEELS, BRAKES 090.500 £74.36 £61.97 TOOLS COMPETITION CLOTHING GIFTS BOOKS MOTO-LITA SPACER JAGUAR ‘D’ TYPE REPLICA MGA REPLICA & BOSS Fits between the boss and the steering wheel to bring the latter closer to you. Black crackle fin- ish. Supplied with nine longer screws to secure A true replica of the Le Mans winning Jaguar ‘D’ Type For the MGA we offer this wood rim steering wheel, the steering wheel through the spacer into the steering wheel. Flat wheel only. Fits original boss in which is supplied complete with the boss to fit to the boss. Originally made for the Jaguar XK120 the car, not Moto-Lita bosses cars standard column and with the MG badge in the 1 centre 12.5mm ( ⁄2”) 090.858 3 19mm ( ⁄4”) 090.608 Dia (mm) Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT 25mm (1”) 090.859 Price £44.40 each | £37.00 ex VAT 381 (15”) 090.088 £318.00 £265.00 432 (17”) 090.090 £510.00 £425.00 200 PRICES CORRECT AT SEPTEMBER 2018 FOR LATEST PRICES REFER TO WEBSITE +44(0) 1885 488 488 WWW.HOLDEN.CO.UK LEATHER RIM STEERING WHEELS The classic British leather rim steering wheel, suitable for virtually all cars from a 1950s sports car to the latest saloon. Made from top quality black leather, handsewn over a natural rubber handgrip, with each spoke having an integral soft padded thumb grip. The traditionally drilled heavy gauge aluminium alloy spokes are either anodised matt black or polished. Unless stated, for all of these steering wheels you will need a boss to ft it to your car. Please see following pages for details LIGHTING SWITCHES IGNITION WIRING HEATERS, ELECTRIC MARK FOUR POLISHED SPOKES MARK FOUR BLACK SPOKES FANS With polished spokes. Flat wheels: With matt black spokes. Flat wheels: FUEL AIR Dia (mm) Part No. Price each ex VAT GAUGES 279 (11”) 090.079* £170.40 £142.00 Dia (mm) Part No. Price each ex VAT 305 (12”) 090.091* £170.40 £142.00 330 (13”) 090.073 £170.40 £142.00 WASHERS WIPERS 330 (13”) 090.082 £170.40 £142.00 356 (14”) 090.074 £170.40 £142.00 356 (14”) 090.083 £170.40 £142.00 MIRRORS 381 (15”) 090.075 £170.40 £142.00 381 (15”) 090.084 £170.40 £142.00 SEATS, SEAT Dished wheels: Dished wheels: BELTS Dia (mm) Part No. Price each ex VAT Dia (mm) Part No. Price each ex VAT STEERING 330 (13”) 090.947 £170.40 £142.00 WHEELS 330 (13”) 090.076 £170.40 £142.00 356 (14”) 090.077 £170.40 £142.00 MOTORCYCLE 356 (14”) 090.081 £170.40 £142.00 381 (15”) 090.085 £170.40 £142.00 PARTS *No holes in the spokes 381 (15”) 090.078 £170.40 £142.00 ACCESSORIES BODY HARDWARE CAR CARE PAINT OIL, GREASE FITTINGS WHEELS, BRAKES TOOLS MARK FOUR WITH SLOTS MARK 4 (SOLID SPOKES) DISHED SVA REGULATED COMPETITION With slots in the spokes. Flat wheels: LEATHER STEERING WHEEL CLOTHING Dia (mm) Part No.
Load more

Recommended publications
  • What You Need to Know About Mounting Radial Tires on Classic Vehicle Rims
    What You Need to Know About Mounting Radial Tires on Classic Vehicle Rims Over the past 100 years, tires, and the wheels that support them, have gone through significant changes as a result of technical innovations in design, technology and materials. No single factor affects the handling and safety of a car’s ride more than the tire and the wheel it is mounted on and how the two work together as a unit. One nagging question that has been the subject of a lot of anecdotal evidence, speculation, and even more widespread rumor is whether rims designed for Bias ply tires can handle the stresses placed on them by Radial ply tires. And the answer is - it depends. It depends on how the rim was originally designed and built as well as whether the rim has few enough cycles on it, and how it has been driven. But most importantly it depends upon the construction of the tire and how it transmits the vehicle's load to where the rubber meets the road. In this paper, we want to educate you on the facts - not the wives tales or just plain bad information - about how Bias and Radial tires differ in working with the rim to provide a safe ride. Why is there a possible rim concern between Radial and Bias Tires? The fitting of radial tires, to wheels and rims originally designed for bias tires, is an application that may result in rim durability issues. Even same-sized bias and radial tires stress a rim differently, despite their nearly identical dimensions.
    [Show full text]
  • The Effect of Rollover Protection Systems and Trailers on Quad Bike Stability
    International Journal of Forest Engineering ISSN: (Print) (Online) Journal homepage: https://www.tandfonline.com/loi/tife20 The effect of rollover protection systems and trailers on quad bike stability Björn Edlund , Ola Lindroos & Tomas Nordfjell To cite this article: Björn Edlund , Ola Lindroos & Tomas Nordfjell (2020) The effect of rollover protection systems and trailers on quad bike stability, International Journal of Forest Engineering, 31:2, 95-105, DOI: 10.1080/14942119.2020.1708067 To link to this article: https://doi.org/10.1080/14942119.2020.1708067 © 2020 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. Published online: 06 Jan 2020. Submit your article to this journal Article views: 369 View related articles View Crossmark data Full Terms & Conditions of access and use can be found at https://www.tandfonline.com/action/journalInformation?journalCode=tife20 INTERNATIONAL JOURNAL OF FOREST ENGINEERING 2020, VOL. 31, NO. 2, 95–105 https://doi.org/10.1080/14942119.2020.1708067 The effect of rollover protection systems and trailers on quad bike stability Björn Edlund , Ola Lindroos and Tomas Nordfjell Department of Forest Biomaterials and Technology, Swedish University of Agricultural, Sciences, Umeå, Sweden ABSTRACT ARTICLE HISTORY Quad bikes are light-weight vehicles which are used for transportation of personnel, equipment, and Received 26 June 2019 material in forestry operations such as planning, logging, planting, and fire-fighting. With increased Accepted 17 December 2019 quad bike usage, serious injuries have become an increasing concern. The most common forms of KEYWORDS severe incidents occur when a quad bike loses stability, causing injuries as it rolls over the rider trapped ATV; All-terrain vehicle; beneath.
    [Show full text]
  • Design \&Amp\; Weight Optimization of a Wheel Rim for Sport Utility Vehicle
    MATEC Web of Conferences 172, 03006 (2018) https://doi.org/10.1051/matecconf/201817203006 ICDAMS 2018 Design & Weight Optimization of a Wheel Rim for Sport Utility Vehicle. Harish Panjagala1, *, Balakrishna M2, Shasikant Kushnoore1 and E L N Rohit Madhukar3 1Faculty of Mechanical Engineering, Koneru Lakshmaiah Educational Foundation, Vaddeswaram, Guntur, Andhra Pradesh, India – 522502. 2Faculty of Mechanical Engineering, G.I.E.T, Rajahmundry, Andhra Pradesh, India. 3Department of Mechanical Engineering, Koneru Lakshmaiah Educational Foundation, Vaddeswaram, Guntur, Andhra Pradesh, India – 522502. ABSTRACT. Automobile have various parts which are important for good running of the vehicle. The most important safety components from a structural point of view are the road wheels. They are required to be lighter and more fascinating to the buyer all the time. This implies that it's important to perform a lot of accurate strength assessment on wheel styles. The wheel rim plays a major role in vehicle dynamics. This paper deals with the design and model of different wheel rims based on weight optimization and also structural analysis has been carried out. It has been compared with standard values by varying two different materials. In addition, from the obtained outputs of simulations and the weight optimization, we suggested Aluminium alloys as most suitable material for SUV. Model is created by using SOLIDWORKS software 2015 and structural analysis & weight optimization is done by using ANSYS WORKBENCH 16.0. 1 INTRODUCTION by considered two different materials namely Aluminum and forged steel and their relative performances have A sport or suburban utility vehicle (SUV) is similar to a been observed respectively.
    [Show full text]
  • Part 72. Automotive Service Operations
    MIOSHA-STD-1149 (05/13) For further information 8 Pages Ph: 517-284-7740 www.michigan.gov/mioshastandards DEPARTMENT OF LICENSING OF REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS Filed with the Secretary of State on December 12, 1974 (as amended September 30, 1977) (as amended May 31, 1990) (as amended August 2, 1993) (as amended May 29, 2013) These rules become effective immediately upon filing with the Secretary of State unless adopted under section 33, 44, or 45a(6) of 1969 PA 306. Rules adopted under these sections become effective 7 days after filing with the Secretary of State. (By authority conferred on the director of the department of licensing and regulatory affairs by sections 16 and 21 of 1974 PA 154, and Executive Reorganization Order Nos. 1996-2, 2003-1, 2008-4, and 2011-4, MCL 445.2001, 445.2011, 445.2025, and 445.2030) R 408.17211, R 408.17212, R 408.17213, R 408.17222, R 408.17225, R 408.17236, and R 408.17251 of the Michigan Administrative Code are amended and R 408.17227 of the Code is rescinded as follows: GENERAL INDUSTRY SAFETY AND HEALTH STANDARD PART 72. AUTOMOTIVE SERVICE OPERATIONS Table of Contents SPECIFICS ................................................................... 4 GENERAL PROVISIONS ............................................ 1 R 408.17232. Cranes and winches, hoists R 408.17201. Scope. ................................................... 1 and chain falls. ....................................................... 4 R 408.17204. Definitions; A to E. ................................. 1 R 408.17233. Wreckers. ............................................... 4 R 408.17205. Definitions; F to L. ................................. 2 R 408.17234. Jacking and blocking. ............................ 4 R 408.17206. Definitions; P to S. ................................. 2 R 408.17235.
    [Show full text]
  • Bbg Document Template
    OVERVIEW Ram cab chassis and pickups can be ordered with a Trailer Tire Pressure Monitor System. (sales code XG9) The system uses tire pressure sensors mounted in the trailer tires that communicate wirelessly with a module mounted near the rear of the truck. The module communicates individual tire pressure status to the cluster and the cluster will display the tire pressure of each trailer tire in the correct trailer position on a menu screen in the EVIC. Tire locations and pressure thresholds can be programmed into the system. Audio and visual indicators alert you if any of the tires have dropped below that threshold. The system is capable of discerning up to 12 tires on up to 3 axles per configured trailer on up to 4 configurable trailers. The factory system is supplied with 4 sensors. Addition sensors can be purchased through any Ram dealer. The customer is responsible for installing the sensors into the trailer tires and programming the system. All sensor pairing and system programming is done on the radio. The system is only available with the 8.4 inch and 12 inch radios. On 2500/3500 pickup trucks, (DJ and D2) the in-cab controls, chassis wiring and TPM receiver module have been factory installed. The module is located behind the rear license plate. A kit containing all required hardware for the sensor installation is provided and can be found in the cab of the vehicle. On 3500/4500/5500 chassis cabs, (DF, DD and DP) the in-cab controls and chassis wiring have been factory installed.
    [Show full text]
  • Direct On-Line Rim-Driven Electric Machines
    Development of Canned Line-start Rim-driven Electric Machines A thesis submitted to The University of Manchester for the degree of Doctor of Philosophy in the Faculty of Engineering and Physical Sciences 2011 Paul M. Tuohy School of Electrical and Electronic Engineering Contents Page Contents Page LIST OF FIGURES ........................................................................................................8 LIST OF TABLES ........................................................................................................15 LIST OF NOTATIONS................................................................................................18 LIST OF ACRONYMS ................................................................................................23 ABSTRACT...................................................................................................................25 DECLARATION...........................................................................................................27 COPYRIGHT STATEMENT......................................................................................28 ACKNOWLEDGEMENTS..........................................................................................29 CHAPTER 1 INTRODUCTION ...............................................................................31 1.1 LOW-SPEED DIRECT-DRIVE MACHINES..............................................................32 1.2 RIM-DRIVEN ELECTRIC MACHINES ....................................................................33 1.3 RESEARCH
    [Show full text]
  • Direct Mount Road Brakes
    Direct Mount Road Brakes Reynolds is graceless: she clear-up chorally and typified her flashings. Is Rudolfo irrationalist or inenarrable after nomographically.controlled Hagan fenced so backward? Nonadministrative Curtis usually rogued some taboos or stovings In yet both tires so why no chance i know who has chosen which mount road brakes always defined in the postcode of Disc brakes are better braking performance is a pretty warm having two factors reinforce each bushing have a direct mount road brakes? Direct-mount calipers are known than standard single-bolt brakes because nothing're so stiff Braced between two mounting points instead of tire they're inherently less wire to flex and less of your entity at is lever is wasted Because since their wide that they feel decent tyre clearance too. Self balancing design allows for completely symmetric set terminal and pad pressure Forged alloy skeleton arms are extremely stiff and lightweight. If that work can readily accommodate different road brakes you? Many of giving best bikes now by direct-mount brakes where the. 3 Can enable use SwissStop carbon pads on alloy rims Yes it works but alloy pads perform and better on alloy rims and the ram from alloy to carbon rims can be dangerous for carbon rims Any alloy bubble though the inside pad can clog a carbon rim in only an few braking intervals. Shop the latest Shimano Road Brakes & Components at Backcountrycom Find great deals on. While direct-mounts are simply great alternative to discs once could ride discs especially hydraulic disc brakes you will believe never want our ride or else again.
    [Show full text]
  • The New Mini Convertible
    MINI Press folder THE NEW MINI CONVERTIBLE. The new PROFILE. MINI Convertible 10/2015 page 1 For Release: EMBARGO: October 22, 2015 6:00 pm EDT /3:00 pm PDT Contact: Mariella Kapsaskis MINI Communications Manager 201.930.3166 [email protected] Rob Duda Director, Peppercomm 908.347.1243 [email protected] New edition of the first convertible in the small car segment; change of generation in the model range of the tradition-steeped British brand is continued with the new MINI Convertible; open-top driving fun on four seats combined with optimized qualities in terms of sportiness, efficiency, comfort, functionality, safety, connectivity and quality of both materials and workmanship. Unmistakable exterior design; precise balance between top-class elegance and sporty flair; characteristic proportions with powerfully sculpted surfaces and a dynamically elongated silhouette; up-to-date interpretation of classic MINI design features: circular headlamps and rear lights with chrome surrounds, hexagonal radiator grille, black peripheral body surround, side turn indicator elements; large selection of body finishes including the variant Caribbean Aqua metallic presented here for the first time. High-quality textile soft top with fully automatic opening and closing mechanism as well as sliding roof function; also available as MINI Yours soft top with unique woven Union Jack graphic; opening and closing of the soft top and side windows in 18 seconds, also possible during travel at speeds of up to 18 mph; invisibly integrated rollover
    [Show full text]
  • TIRE to RIM and WHEEL SIZING CHART Front Tire 16" Tire Size Rim (Inch) 110/90-16 2.15
    TIRE TO RIM AND WHEEL SIZING CHART Front Tire 16" 20" Tire Size Rim (inch) Tire Size Rim (inch) 110/90-16 2.15 - 3.00 120/70-20 3.5 120/80-16 2.50 - 3.00 140/60-20 3.75 130/70-16 3.50 - 4.00 150/55-20 4.5 130/90-16 2.50 - 3.50 150/80-16 3.00 - 4.00 21" 17" Tire Size Rim (inch) Tire Size Rim (inch) 80/90-21 1.60 - 2.15 110/70-17 3.00 - 3.50 90/90-21 1.85 - 2.50 110/80-17 2.15 - 3.00 120/70-21 3.00 - 3.75 120/60-17 3.50 - 3.75 130/60-21 3.00 - 4.00 120/70-17 2.75 - 3.75 140/70-21 3.00 - 3.75 120/80-17 2.50 - 3.00 120/90-17 2.50 - 3.00 23" 140/80-17 3.00-4.00 Tire Size Rim (inch) 150/80-17 3.00 - 4.25 120/70-23 3.50 - 4.00 130/50-23 3.50 - 4.00 18" 130/60-23 3.00 - 3.75 Tire Size Rim (inch) 100/90-18 2.15 - 2.75 26" 110/80-18 2.15 - 3.00 Tire Size Rim (inch) 110/90-18 2.15 - 3.00 120/50-26 3.50-3.75 120/70-18 3.00 - 3.75 120/55-26 3.50-3.75 120/90-18 2.50 - 3.00 130/60-18 3.50 - 4.00 24" 130/70-18 3.00 - 4.00 Tire Size Rim (inch) 140/70-18 3.00 - 4.50 130/70-24 4 19" 30" Tire Size Rim (inch) Tire Size Rim (inch) 90/90-19 1.85 - 2.50 140/40-30 4 100/90-19 2.15 - 2.75 110/90-19 2.15 - 3.00 120/70-19 3.00 - 3.75 130/60-19 3.00 - 3.75 Rear Wheel 15" 17" 18" Tire Size Rim (inch) Tire Size Rim (inch) Tire Size Rim (inch) 130/90-15 2.50 - 3.50 120/90-17 2.50 - 3.00 110/90-18 2.15 -3.00 140/80-15 2.75 - 3.75 130/90-17 2.50 - 3.50 120/90-18 2.50 - 3.00 140/90-15 2.75 - 3.75 140/70-17 3.50 - 4.50 130/80-18 2.50 - 3.50 150/80-15 3.00 - 4.25 140/80-17 2.75 - 4.00 140/70-18 3.00 - 4.50 150/90-15 3.00 - 4.00 150/60-17 4.00 - 4.75 150/70-18 3.50 - 4.50
    [Show full text]
  • A REVIEW on SELECTION, MANUFACTURING and TESTING of COMPOSITE MATERIALS for ALLOY WHEELS Chintalasaivirinchy*, Abdul Hafeezasif, V
    International Journal of Pure and Applied Mathematics Volume 118 No. 9 2018, 331-343 ISSN: 1311-8080 (printed version); ISSN: 1314-3395 (on-line version) url: http://www.ijpam.eu Special Issue ijpam.eu A REVIEW ON SELECTION, MANUFACTURING AND TESTING OF COMPOSITE MATERIALS FOR ALLOY WHEELS ChintalaSaiVirinchy*, Abdul HafeezAsif, V. Jayakumar, D.Santhosh Kumar, MarrireddyRaviteja Reddy Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai – 602105, Tamil Nadu, INDIA ABSTRACT The wheels of an automobile are usually made out of steel but due to the increased demand for peculiarity and enhanced outlook alloy materials are used for the wheels these days. Performance of the vehicle is enhanced as they reduce its weight, increase its fuel efficiency and give a spectacular look compared to that of normal steel wheels. But there are some factors which hinder their mass usage like, comparatively high cost and less strength compared to that of steel. Though alloy materials are strong enough if the car undergoes significant trauma the alloy rims can bend. Many researchers have been carried out based on enhancing the geometry of the beam, like slightly curved beams could employ more behavioural changes and increased stiffness and some have done research on the structure which concluded bi-directional fabrics could be more efficient and some changes can be made because of changes in cross section. In this paper, a detailed study is carried out on the various parameters, which contribute to the creation of a new composite material for alloy wheels, which include the selection of materials, failure techniques, and the manufacturing processes involved.
    [Show full text]
  • Design and Analysis of Alloy Wheels
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 04 Issue: 06 | June -2017 www.irjet.net p-ISSN: 2395-0072 DESIGN AND ANALYSIS OF ALLOY WHEELS K. Srinivasa Rao 1, M .Rajesh 2 ,G.Sreedhara Babu 3 1,2,3Assistant Professors, Dept.of Mechanical Engineering, V.R.Siddhartha Engineering College, Vijayawada, AP, INDIA. ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - The existing car model wheel rim is drawn in motion by rolling. In order for wheels to rotate, a moment the design software Creo 2.0 and various loads and forces needs to be applied to the wheel about its axis, either by are theoretically calculated and applied on the model and way of gravity, or by application of another external force. analysed through ansys (17.0) software. Initially the static More generally the term is also used for other circular analysis and dynamic analysis is done by giving the objects that rotate or turn, such as a ship’s wheel, steering corresponding engineering data that consisting of wheel and flywheel. Safety and economy are particularly mechanical properties and their related chemical of major concerns when designing a mechanical structure compositions, the vonmises stresses, deformations, and so that the people could use them safely and economically. shear stresses are determined for the complex loading that Style, weight, manufacturability and performance are the has been applied on rim models. The complex loading four major technical issues related to the design of a new includes applying the pressures ie, 90o angle pressure wheel and/or its optimization. The wheels are made of (inflation pressure) on the bead areas, side thrust on rim steel, Magnesium alloy and cast/forge Aluminium alloys.
    [Show full text]
  • CRASH DATA RESEARCH CENTER Calspan Corporation Buffalo, NY 14225
    CRASH DATA RESEARCH CENTER Calspan Corporation Buffalo, NY 14225 ON-SITE CERTIFIED ADVANCED 208-COMPLIANT VEHICLE CRASH INVESTIGATION CALSPAN CASE NO: CA05-042 VEHICLE: 2005 VOLKSWAGEN NEW BEETLE CONVERTIBLE LOCATION: VIRGINIA CRASH DATE: JUNE 2005 Contract No. DTNH22-01-C-17002 Prepared for: U.S. Department of Transportation National Highway Traffic Safety Administration Washington, D.C. 20590 DISCLAIMER This document is disseminated under the sponsorship of the Department of Transportation in the interest of information exchange. The United States Government assumes no responsibility for the contents or use thereof. The opinions, findings, and conclusions expressed in this publication are those of the authors and not necessarily those of the National Highway Traffic Safety Administration. The crash investigation process is an inexact science which requires that physical evidence such as skid marks, vehicular damage measurements, and occupant contact points are coupled with the investigator's expert knowledge and experience of vehicle dynamics and occupant kinematics in order to determine the pre-crash, crash, and post-crash movements of involved vehicles and occupants. Because each crash is a unique sequence of events, generalized conclusions cannot be made concerning the crashworthiness performance of the involved vehicle(s) or their safety systems. ii TECHNICAL REPORT STANDARD TITLE PAGE 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. CA05-042 4. Title and Subtitle 5. Report Date: On-Site Certified Advanced 208 Compliant Vehicle Investigation February 2006 Vehicle: 2005 Volkswagen New Beetle Convertible Location: Virginia 6. Performing Organization Code 7. Author(s) 8. Performing Organization Crash Data Research Center Report No. 9.
    [Show full text]