DOCSLIB.ORG

Aerojet Rocketdyne's RS-25 Engine Completes Key Full-Duration Test

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Aerojet Rocketdyne's RS-25 Engine Completes Key Full-Duration Test August 13, 2015 Aerojet Rocketdyne's RS-25 Engine Completes Key Full-Duration Test SACRAMENTO, Calif., Aug. 13, 2015 (GLOBE NEWSWIRE) -- Aerojet Rocketdyne (NYSE:AJRD) announced today that it successfully completed a full duration (535 seconds) verification test of its RS-25 rocket engine that will power NASA's Space Launch System (SLS), America's next generation heavy-lift launch vehicle. Today's test, conducted at NASA's Stennis Space Center, was the sixth test in a seven-test series that began in January 2015 to validate the engine for use on the SLS. "It is great to see this revered engine back in action and progressing full steam ahead for launch aboard Exploration Mission-1 in 2018," said Julie Van Kleeck, vice president of Aerojet Rocketdyne's Advanced Space & Launch Programs business unit. "The RS-25 is the world's most reliable and thoroughly tested large liquid-fueled rocket engine ever built." The RS-25, previously known as the Space Shuttle Main Engine (SSME), successfully powered the space shuttle during 30 years of operation. The RS-25 uses a staged-combustion engine cycle that burns liquid hydrogen and liquid oxygen propellants to achieve performance never previously attained in a production rocket engine. Interestingly, the only exhaust produced by the RS-25 is water vapor in the form of steam. The RS-25 will continue to serve the nation's human exploration propulsion needs as the core stage engines for SLS. The SLS program has 16 engines in inventory at Aerojet Rocketdyne's facility within NASA's Stennis Space Center, with 14 of them previously flown aboard the space shuttle. "The engine that was tested today, development engine 0525, continues demonstration of the new controller's functionality and the engine's ability to perform to SLS requirements," added Jim Paulsen, vice president, Program Execution, Advanced Space & Launch Programs at Aerojet Rocketdyne. "We are conducting engine testing to ensure all 16 flight engines in our inventory meet flightworthiness requirements for SLS." SLS will fly four RS-25 engines at the bottom of the core stage as opposed to three that flew on the space shuttle; the solid rocket boosters will be closer to the RS-25 engines than they were on the shuttle stack; and the taller SLS launch vehicle will result in higher propellant inlet pressure on the engine system. These changes, as well as operating them at 109% thrust means the engines will need to withstand more demanding conditions than when they were previously flown. In addition to preparing for the new environmental conditions, the engines also are receiving a technology "refresh" of their controllers, which serve as the brains of the engines. The upgraded controller provides for communication between the vehicle and the engine, relaying commands to the engine and transmitting data back to the vehicle to regulate the thrust and fuel mixture ratio and monitor the engine's health and status. "The new controller provides modern electronics, architecture and software," said Paulsen. "It will improve reliability and safety for the SLS crew as well as the ability to readily procure electronics for decades to come." The first flight test of the SLS will be configured for a 70-metric-ton lift capacity and carry an un-crewed Orion spacecraft. As SLS evolves, it will be the most powerful rocket ever built and provide an unprecedented lift capability of 130 metric tons. "SLS is the vehicle that will take astronauts to Mars and pre-position cargo for their survival," said Van Kleeck. "It is great to see that the red planet is one step closer and know our Aerojet Rocketdyne team is helping make that dream a reality." Aerojet Rocketdyne is an innovative company delivering solutions that create value for its customers in the aerospace and defense markets. The company is a world-recognized aerospace and defense leader that provides propulsion and energetics to the space, missile defense and strategic systems, tactical systems and armaments areas, in support of domestic and international markets. Additional information about Aerojet Rocketdyne can be obtained by visiting our websites at www.Rocket.com and www.AerojetRocketdyne.com. CONTACT: Glenn Mahone, Aerojet Rocketdyne, 202-302-9941 [email protected] Mary Engola, Aerojet Rocketdyne, 571-289-1371 [email protected].
Load more

Recommended publications
  • RD-180—Or Bust?
    RD-180—or By Autumn A. Arnett, Associate Editor As it stands, the US could sustain its Bust? manifest for two years with the current supply of RD-180 engines. But a new he United States’ sustained access he doesn’t really know what that R&D engine could take seven or more years to space is in question. Heavily amounts to, but said he is hopeful the to be operational, making LaPlante’s Treliant on the Russian-made En- partnership will mean a new engine on “$64 million question” a “hydra-headed ergomash RD-180 engine to power its the market soon. monster,” in the words of former AFSPC launches, US military space personnel “Three years of development is better Commander Gen. William L. Shelton. are looking for a replacement because than starting at ground zero,” Hyten said. “I don’t think we build the world’s best of the tense and uncertain status of “If we start at ground zero to build a rocket engine,” Shelton said last July. “I American and Russian relations. new engine in the hydrocarbon technology would love for us as a nation to regain the Funds are already being appropriated area we’re fi ve years away from produc- lead in liquid rocket propulsion.” for research and development of a new tion, roughly, maybe four, maybe six. Both LaPlante and Hyten are propo- engine, but Gen. John E. Hyten, com- The one thing you would have to do is nents of the United States continuing to mander of Air Force Space Command, spend the next year or two driving down fund research and development of a new considers the issue to be urgent.
    [Show full text]
  • ULA Atlas V Launch to Feature Full Complement of Aerojet Rocketdyne Solid Rocket Boosters
    April 13, 2018 ULA Atlas V Launch to Feature Full Complement of Aerojet Rocketdyne Solid Rocket Boosters SACRAMENTO, Calif., April 13, 2018 (GLOBE NEWSWIRE) -- The upcoming launch of the U.S. Air Force Space Command (AFSPC)-11 satellite aboard a United Launch Alliance Atlas V rocket from Cape Canaveral Air Force Station, Florida, will benefit from just over 1.74 million pounds of added thrust from five AJ-60A solid rocket boosters supplied by Aerojet Rocketdyne. The mission marks the eighth flight of the Atlas V 551 configuration, the most powerful Atlas V variant that has flown to date. The Atlas V 551 configuration features a 5-meter payload fairing, five AJ-60As and a Centaur upper stage powered by a single Aerojet Rocket RL10C-1 engine. This configuration of the U.S. government workhorse launch vehicle is capable of delivering 8,900 kilograms of payload to geostationary transfer orbit (GTO), and also has been used to send scientific probes to explore Jupiter and Pluto. The Centaur upper stage also uses smaller Aerojet Rocketdyne thrusters for pitch, yaw and roll control, while both stages of the Atlas V employ pressurization vessels built by Aerojet Rocketdyne's ARDÉ subsidiary. "The Atlas V is able to perform a wide variety of missions for both government and commercial customers, and the AJ-60A is a major factor in that versatility," said Aerojet Rocketdyne CEO and President Eileen Drake. "Aerojet Rocketdyne developed the AJ-60A specifically for the Atlas V, delivering the first booster just 42 months after the contract award, which underscores our team's ability to design and deliver large solid rocket motors in support of our nation's strategic goals and efforts to explore our solar system." The flight of the 100th AJ-60A, the largest monolithically wound solid rocket booster ever flown, took place recently as part of a complement of four that helped an Atlas V 541 place the nation's newest weather satellite into GTO.
    [Show full text]
  • Privacy Statement Link at the Bottom of Aerojet Rocketdyne Websites
    Privacy Notice Aerojet Rocketdyne – For external use Contents Introduction ...................................................................................................................... 3 Why we collect personal information? ............................................................................. 3 How we collect personal information? ............................................................................. 3 How we use information we collect? ............................................................................... 4 How we share your information? .................................................................................... 4 How we protect your personal information? ..................................................................... 4 How we collect consent? .............................................................................................. 4 How we provide you access? ........................................................................................ 4 How to contact Aerojet Rocketdyne privacy?.................................................................... 5 Collection of personal information .................................................................................. 5 Disclosure of personal information.................................................................................. 5 Sale of personal information .......................................................................................... 6 Children’s online privacy ..............................................................................................
    [Show full text]
  • 6. Chemical-Nuclear Propulsion MAE 342 2016
    2/12/20 Chemical/Nuclear Propulsion Space System Design, MAE 342, Princeton University Robert Stengel • Thermal rockets • Performance parameters • Propellants and propellant storage Copyright 2016 by Robert Stengel. All rights reserved. For educational use only. http://www.princeton.edu/~stengel/MAE342.html 1 1 Chemical (Thermal) Rockets • Liquid/Gas Propellant –Monopropellant • Cold gas • Catalytic decomposition –Bipropellant • Separate oxidizer and fuel • Hypergolic (spontaneous) • Solid Propellant ignition –Mixed oxidizer and fuel • External ignition –External ignition • Storage –Burn to completion – Ambient temperature and pressure • Hybrid Propellant – Cryogenic –Liquid oxidizer, solid fuel – Pressurized tank –Throttlable –Throttlable –Start/stop cycling –Start/stop cycling 2 2 1 2/12/20 Cold Gas Thruster (used with inert gas) Moog Divert/Attitude Thruster and Valve 3 3 Monopropellant Hydrazine Thruster Aerojet Rocketdyne • Catalytic decomposition produces thrust • Reliable • Low performance • Toxic 4 4 2 2/12/20 Bi-Propellant Rocket Motor Thrust / Motor Weight ~ 70:1 5 5 Hypergolic, Storable Liquid- Propellant Thruster Titan 2 • Spontaneous combustion • Reliable • Corrosive, toxic 6 6 3 2/12/20 Pressure-Fed and Turbopump Engine Cycles Pressure-Fed Gas-Generator Rocket Rocket Cycle Cycle, with Nozzle Cooling 7 7 Staged Combustion Engine Cycles Staged Combustion Full-Flow Staged Rocket Cycle Combustion Rocket Cycle 8 8 4 2/12/20 German V-2 Rocket Motor, Fuel Injectors, and Turbopump 9 9 Combustion Chamber Injectors 10 10 5 2/12/20
    [Show full text]
  • Jpc-Final-Program.Pdf
    49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit (JPC) Advancing Propulsion Capabilities in a New Fiscal Reality 14–17 July 2013 San Jose Convention Center 11th International Energy Conversion San Jose, California Engineering Conference (IECEC) FINAL PROGRAM www.aiaa.org/jpc2013 www.iecec.org #aiaaPropEnergy www.aiaa.org/jpc2013 • www.iecec.org 1 #aiaaPropEnergy GET YOUR CONFERENCE INFO ON THE GO! Download the FREE Conference Mobile App FEATURES • Browse Program – View the program at your fingertips • My Itinerary – Create your own conference schedule • Conference Info – Including special events • Take Notes – Take notes during sessions • Venue Map – San Jose Convention Center • City Map – See the surrounding area • Connect to Twitter – Tweet about what you’re doing and who you’re meeting with #aiaaPropEnergy HOW TO DOWNLOAD Any version can be run without an active Internet connection! You can also sync an Compatible with itinerary you created online with the app by entering your unique itinerary name. iPhone/iPad, MyItinerary Mobile App MyItinerary Web App Android, and • For optimal use, we recommend • For optimal use, we recommend: rd BlackBerry! iPhone 3GS, iPod Touch (3 s iPhone 3GS, iPod Touch (3rd generation), iPad iOS 4.0, or later generation), iPad iOS 4.0, • Download the MyItinerary app by or later searching for “ScholarOne” in the s Most mobile devices using Android App Store directly from your mobile 2.2 or later with the default browser device. Or, access the link below or scan the QR code to access the iTunes s BlackBerry Torch or later device Sponsored by: page for the app.
    [Show full text]
  • Materials for Liquid Propulsion Systems
    https://ntrs.nasa.gov/search.jsp?R=20160008869 2019-08-29T17:47:59+00:00Z CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost.
    [Show full text]
  • Los Motores Aeroespaciales, A-Z
    Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 < aeroteca.com > Depósito Legal B 9066-2016 Título: Los Motores Aeroespaciales A-Z. © Parte/Vers: 1/12 Página: 1 Autor: Ricardo Miguel Vidal Edición 2018-V12 = Rev. 01 Los Motores Aeroespaciales, A-Z (The Aerospace En- gines, A-Z) Versión 12 2018 por Ricardo Miguel Vidal * * * -MOTOR: Máquina que transforma en movimiento la energía que recibe. (sea química, eléctrica, vapor...) Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 Este facsímil es < aeroteca.com > Depósito Legal B 9066-2016 ORIGINAL si la Título: Los Motores Aeroespaciales A-Z. © página anterior tiene Parte/Vers: 1/12 Página: 2 el sello con tinta Autor: Ricardo Miguel Vidal VERDE Edición: 2018-V12 = Rev. 01 Presentación de la edición 2018-V12 (Incluye todas las anteriores versiones y sus Apéndices) La edición 2003 era una publicación en partes que se archiva en Binders por el propio lector (2,3,4 anillas, etc), anchos o estrechos y del color que desease durante el acopio parcial de la edición. Se entregaba por grupos de hojas impresas a una cara (edición 2003), a incluir en los Binders (archivadores). Cada hoja era sustituíble en el futuro si aparecía una nueva misma hoja ampliada o corregida. Este sistema de anillas admitia nuevas páginas con información adicional. Una hoja con adhesivos para portada y lomo identifi caba cada volumen provisional. Las tapas defi nitivas fueron metálicas, y se entregaraban con el 4 º volumen. O con la publicación completa desde el año 2005 en adelante. -Las Publicaciones -parcial y completa- están protegidas legalmente y mediante un sello de tinta especial color VERDE se identifi can los originales.
    [Show full text]
  • Environmental, Social & Governance Report
    ESG Environmental, Social & Governance Report Aerojet Rocketdyne 2020 ESG Report Table of Contents About Us Aerojet Rocketdyne is a world-recognized supports our business and our efforts to meet Section One - Social Responsibility technology-based engineering and or exceed the expectations of our customers, Aerojet Rocketdyne Foundation .......................................................... 7 manufacturing company that develops and deliver best-in-class products and services, Employee Volunteer and Giving .......................................................... 8 produces specialized power and propulsion and uphold our high ethical standards while Sponsorship and Donations ................................................................ 8 systems, as well as armament systems. We conducting business with a regard for the develop and manufacture liquid and solid rocket preservation and protection of human safety, Employees and Community ................................................................. 9 propulsion, air-breathing hypersonic engines, health, and the natural environment. Human Resources and electric power and propulsion for space, Section Two - Our Shared Values of Accountability, defense, civil and commercial applications. Tuition Assistance Program ............................................................... 13 Adaptability, Excellence, Integrity and In addition, we are engaged in the rezoning, Scholarship Program ......................................................................... 14 Teamwork are intended
    [Show full text]
  • ADVANCED SPACE ENGINE N74-16489 PRELIINABY DESIGN (Rocketdyne) F5,-P HC CSCL 21H $27.25 Unclas G3/28 28289 1
    NASA CR-121236 R-9269 ADVANCED SPACE ENGINE PRELIMINARY DESIGN By A. T. Zachary ROCKETDYNE DIVISION C- ROCKWELL INTERNATIONAL Prepared for NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA-Lewis Research Center Contract NAS3-16751 (NVSA-CR-121236) ADVANCED SPACE ENGINE N74-16489 PRELIINABY DESIGN (Rocketdyne) f5,-p HC CSCL 21H $27.25 Unclas G3/28 28289 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. NASA CR-121236 4. Title and Subtitle 5. Report Date ADVANCED SPACE ENGINE PRELIMINARY DESIGN October 1973 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. A.T. Zachary R-9269 10. Work Unit No. 9. Performing Organization Name and Address Rocketdyne Division, Rockwell International 11. Contract or Grant No. Canoga Park, California, 91304 NAS3-16751 13. Type of Report and Period Covered 12. Sponsoring Agency Name and Address Contractor Report National Aeronautics and Space Administration Washington, D.C., 20546 14. Sponsoring Agency Code 15. Supplementary Notes Project Manager, D.D. Scheer, NASA-Lewis Research Center, Cleveland, Ohio 16. Abstract Analysis and design of an optimum LO2/LH2, combustion topping cycle, 88,964 N (20,000-pound) thrust, liquid rocket engine was conducted. The design selected is well suited to high-energy, upper-stage engine applications such as the Space Tug and embodies features directed toward optimization of vehicle performance. A configuration selection was conducted based on prior Air Force Contracts F04611-71-C0039, F04611-71-C-0040, and F04611-67-C-0016,.and additional criteria for optimum stage performance. Following configuration selection, analyses and design of the major components and engine systems were conducted to sufficient depth to provide layout drawings suitable for subsequent detailing.
    [Show full text]
  • Aerojet Marks 70 Years Serving the Warfighter and Powering Exploration
    March 19, 2012 Aerojet Marks 70 Years Serving the Warfighter and Powering Exploration SACRAMENTO, Calif., March 19, 2012 (GLOBE NEWSWIRE) -- Aerojet, a GenCorp (NYSE:GY) company, announced its 70th anniversary today, marking the March 19, 1942 founding of Aerojet Engineering Corporation by world-renowned aerodynamicist Dr. Theodore von Kármán and five California Institute of Technology colleagues. These rocket pioneers leveraged their ingenuity and shared passion for rocketry to create a company that today has powered some of the nation's most critical defense and exploration missions. Launching as a single-product company, Aerojet manufactured critical Jet Assisted Take Off (JATO) propulsion, which led to increased allied pilot safety by enabling heavily laden aircraft to take off from short runways and carrier decks. Following the allied forces' victory in WWII, Aerojet's production efforts turned to the development of solid rocket propellant motors for the Intercontinental Ballistic Missile (ICBM) Minuteman, as well as solid rocket motors for the two-stage submarine- launched ballistic missile, Polaris. Aerojet also began work on the Titan program. The company ultimately spent the next 50 years producing liquid rocket engines for the entire Titan launcher family: Titan I, Titan II, Titan III and Titan IV. Space Exploration and Defending Freedom With the launch of the space race in the 1960s, Aerojet's propulsion expertise powered the nation's early exploration accomplishments. In 1966, three of every four rockets launched from Cape Canaveral, Fla. were powered by Aerojet propulsion systems. Following the two-man missions of Gemini, Aerojet's Service Propulsion System placed Apollo astronauts in orbit around the moon and brought them home again.
    [Show full text]
  • RS-25 for NASA's Space Launch System
    AEROJET ROCKETDYNE PROPRIETARY 0 THIS DOCUMENT CONTAINS NO EXPORT CONTROLLED – ITAR/USML CATEGORY IV September 2016 Aerojet Rocketdyne Footprint International Offices: Redmond, WA Moscow Tokyo London Belfast UAE Picatinny Arsenal, NJ Sacramento, CA Clearfield, UT ARDÉ, NJ Headquarters Washington, D.C. Denver, CO Gainesville, VA Orange, VA Los Angeles, CA Jonesboro, TN Vernon, CA Camden, AR Socorro, NM Tucson, AZ Huntsville, AL Headquarters Dallas, TX Orlando, FL Operating Locations Stennis, MS Eglin AFB, FL Field Offices West Palm Beach, FL Nearly 5,000 Employees Across 14 States 140 and Growing at NASA Stennis Space Center Aerojet Rocketdyne Proprietary 1 Aerojet Rocketdyne & NASA Stennis Space Center (SSC): A Fifty Year Partnership • NASA-SSC is the nation’s Center of Excellence for large space transportation propulsion systems testing • Tested each of the F-1 rocket engines that powered the first stage of the Saturn V launch vehicle for the Apollo missions • Early 1970s, SSC’s facilities were modified to test the space shuttle's main engines (SSMEs) • All the 405 flown engines supporting 135 shuttle flights tested and proven flight-worthy at SSC • SSC’s state-of-the-art facilities continues to assemble and test components and engines for future Space Launch System (SLS) missions (RS-25 and J-2X) • RS-68/A engines supporting the Delta IV program launching national security satellites and recently the Orion Capsule for NASA’s Exploration Flight Test-1 Aerojet Rocketdyne Proprietary 2 SSC Facilities Occupied by Aerojet Rocketdyne • A1 Test Stand– RS-25 (1st Stage booster for SLS) • Primary Customer – NASA • Aerojet Rocketdyne Test Article Contractor • B Test Stand • B1 - RS-68 (1st Stage booster for Delta-IV) • Primary Customer – Air Force (ULA) • Test Stand is operated under a Space Act Agreement • B2 (RS-25 Space Launch System Stage Testing) • B Complex Test Control Center (BTCC) • Engine Assembly Facility (EAF – Bldg.
    [Show full text]
  • Space Shuttle Main Engine Orientation
    BC98-04 Space Transportation System Training Data Space Shuttle Main Engine Orientation June 1998 Use this data for training purposes only Rocketdyne Propulsion & Power BOEING PROPRIETARY FORWARD This manual is the supporting handout material to a lecture presentation on the Space Shuttle Main Engine called the Abbreviated SSME Orientation Course. This course is a technically oriented discussion of the SSME, designed for personnel at any level who support SSME activities directly or indirectly. This manual is updated and improved as necessary by Betty McLaughlin. To request copies, or obtain information on classes, call Lori Circle at Rocketdyne (818) 586-2213 BOEING PROPRIETARY 1684-1a.ppt i BOEING PROPRIETARY TABLE OF CONTENT Acronyms and Abbreviations............................. v Low-Pressure Fuel Turbopump............................ 56 Shuttle Propulsion System................................. 2 HPOTP Pump Section............................................ 60 SSME Introduction............................................... 4 HPOTP Turbine Section......................................... 62 SSME Highlights................................................... 6 HPOTP Shaft Seals................................................. 64 Gimbal Bearing.................................................... 10 HPFTP Pump Section............................................ 68 Flexible Joints...................................................... 14 HPFTP Turbine Section......................................... 70 Powerhead...........................................................
    [Show full text]