Home Theater Routing System Any Time
Total Page:16
File Type:pdf, Size:1020Kb
2048 Mercer Rd. Lexington, KY 40511 Phone: 859-233-4599 Fax: 859-233-4510 800/322-8346 Toll Free USA/Canada: 800-322-8346 Customer Toll Free USA & Canada Website: www.audioauthority.com [email protected] Any Source, Any Display, Home Theater Routing System Any Time. the desired source to be selected remotely via IR. The HD Matrix Router Capability Wallplates also have a convenient F-connector as a pass- The AVAtrix is a matrix configuration of HD component through for an antenna connection which allows terrestrial video, digital audio and stereo audio signals. Any of six HD content from the Wallplate (a coaxial cable must be sources may be routed to multiple remote Wallplates or run for antenna functionality). to the main output at any time. Each of the AVAtrix’s Cat 5 outputs is terminated at a Model 9878 Wallplate which provides a connection point for component video, digital Custom Options audio, and stereo analog audio. The AVAtrix is easy to install right out of the box, and loaded with all the features and options needed for com- Audio Authority’s balanced line architecture along with plex installations. It ships with its own IR remote control, our special cable length compensation circuitry, allows the but it can learn IR commands from other brand remotes signal to be transmitted up to 1,000 feet while preserving or operate via RS-232 commands from a 3rd party remote high definition signal clarity and vibrancy. control system. Each source input can be given a custom name that is displayed on the fluorescent display. A flash The Cat 5 Wallplate memory slot allows easy firmware upgrades and provides a Audio and video signals are carried on two Cat 5 cables way for installers to quickly perform setup tasks using a PC to each Wallplate. A return pathway for an IR receiver* is to configure the AVAtrix. Rack ears are available for rack- also included in the Cat 5 cable run. This pathway allows mount applications. * IR receivers not included. Use compatible IR receivers such as Xantech 291-00. ** Audio Authority Model 1311 and 1312 convert DVI to HDMI and HDMI to DVI. Seamlessly Integrate Digital and Analog Video HD Sources The AVX-661 (rear view shown) makes it easy to view both YPbPr component and DVI (or HDMI**) video sources on a high definition TV with a digital video input. Both DVI and YPbPr video signals are routed to the unit’s main outputs; howev- er, a special circuit converts YPbPr signals to DVI, so both analog and digital signals are available on the DVI main output. So, if you have a display with a digital video input, you can select all connected sources without changing the video input to the display, simplifying the entertainment experience. (This feature is not available with AVX-561.) System Overview * MAIN PHOTO PHOTO System Contents (1) Model 1166 or 1156 HD AutoSelector Source Inputs DVI*, YPbPr, digital audio and analog audio Product (1) Model 1176 HD Matrix Router Local Output DVI*, YPbPr, digital audio and analog audio (6) Model 9878 Cat 5 Wallplates Remote Outputs YPbPr, digital audio and analog audio (1) Model 1108 IR Router Details (1) Model 1105 IR Remote Control Control Methods Front panel controls (1) Internal Bus Connection Cable Front panel IR (2) 18V DC Power Adapters IR input on rear panel RS-232 connection on rear panel Resolutions High definition (720p, 1080i, 1080p) IR receivers installed at remote Wallplates Standard definition (480i, 480p, 576i, 576p) * DVI capability is only available with AVX-661. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Audio Authority and the Double-A Symbol are registered trademarks of Audio Authority Corporation. Copyright December, 2005..