20 Week Metals Curriculum Outline Mr. Bliss, RCK High School Week 1

Total Page：16

File Type：pdf, Size：1020Kb

20 Week Metals Curriculum Outline Mr. Bliss, RCK High School Week 1 Basic safety, safety quiz, classroom procedures, attendance, grading, cleanup, notebooks, locks Week 2 Intro to metal work, metalworking careers, metal properties, finish safety Week 3 Begin sheet metal project, overview of sheet metal work, hand tools, cutting tools Week 4 Bending sheet metal, shrinking and stretching sheet metal, finish sheet metal project Week 5 Lathe operations, cutting speeds, feed rates, products that are made with the lathe, lathe safety, begin lathe project Week 6 Milling operations, cutting speeds and feed rates, products made on the mill, mill safety, begin mill project Week 7 Forging and bending metal, how to operate forge, forge safety, temperature of metal/properties, begin forge project Week 8 Power sawing, types of blades, cutting speeds, power sawing safety Week 9 Measurement, micrometers, vernier calipers, basic measurement, students continue to work on projects Week 10 Heat treatment of steel, properties of steel, temperatures needed to change properties, estimating temperatures, continue work on projects Week 11 Torches, oxygen/acetylene, cutting with torch, torch safety Week 12 Welding, amperage, properties of electricity, welding safety, introduce welding project Week 13 Soldering and brazing, when to use each, flux, brazing joints, continue projects Week 14 Steel production processes, iron ore, types of iron, blast furnace Week 15 Steel alloys, metals other than steel and iron, properties of steel, uses, continue projects Week 16 Working drawings and sketches, drawing views, types of lines, scales, why is sketching useful Week 17 Stress, strain, and strengths of materials, advanced metal properties Week 18 Review for final, continue projects Week 19 Review for final continue working on projects, notebooks due Week 20 All projects finished, final exam, final cleanup, metals career report due .

Copy Link

Recommended publications

Treatise on Combined Metalworking Techniques: Forged Elements and Chased Raised Shapes Bonnie Gallagher
Rochester Institute of Technology RIT Scholar Works Theses Thesis/Dissertation Collections 1972 Treatise on combined metalworking techniques: forged elements and chased raised shapes Bonnie Gallagher Follow this and additional works at: http://scholarworks.rit.edu/theses Recommended Citation Gallagher, Bonnie, "Treatise on combined metalworking techniques: forged elements and chased raised shapes" (1972). Thesis. Rochester Institute of Technology. Accessed from This Thesis is brought to you for free and open access by the Thesis/Dissertation Collections at RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For more information, please contact [email protected]. TREATISE ON COMBINED METALWORKING TECHNIQUES i FORGED ELEMENTS AND CHASED RAISED SHAPES TREATISE ON. COMBINED METALWORKING TECHNIQUES t FORGED ELEMENTS AND CHASED RAISED SHAPES BONNIE JEANNE GALLAGHER CANDIDATE FOR THE MASTER OF FINE ARTS IN THE COLLEGE OF FINE AND APPLIED ARTS OF THE ROCHESTER INSTITUTE OF TECHNOLOGY AUGUST ( 1972 ADVISOR: HANS CHRISTENSEN t " ^ <bV DEDICATION FORM MUST GIVE FORTH THE SPIRIT FORM IS THE MANNER IN WHICH THE SPIRIT IS EXPRESSED ELIEL SAARINAN IN MEMORY OF MY FATHER, WHO LONGED FOR HIS CHILDREN TO HAVE THE OPPORTUNITY TO HAVE THE EDUCATION HE NEVER HAD THE FORTUNE TO OBTAIN. vi PREFACE Although the processes of raising, forging, and chasing of metal have been covered in most technical books, to date there is no major source which deals with the functional and aesthetic requirements
[Show full text]
Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications
Utah State University DigitalCommons@USU Space Dynamics Lab Publications Space Dynamics Lab 1-1-2013 Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications T. Newsander B. Crowther G. Gubbels R. Senden Follow this and additional works at: https://digitalcommons.usu.edu/sdl_pubs Recommended Citation Newsander, T.; Crowther, B.; Gubbels, G.; and Senden, R., "Aluminum Alloy AA-6061 and RSA-6061 Heat Treatment for Large Mirror Applications" (2013). Space Dynamics Lab Publications. Paper 102. https://digitalcommons.usu.edu/sdl_pubs/102 This Article is brought to you for free and open access by the Space Dynamics Lab at DigitalCommons@USU. It has been accepted for inclusion in Space Dynamics Lab Publications by an authorized administrator of DigitalCommons@USU. For more information, please contact [email protected]. Aluminum alloy AA-6061 and RSA-6061 heat treatment for large mirror applications T. Newswandera, B. Crowthera, G. Gubbelsb, R. Sendenb aSpace Dynamics Laboratory, 1695 North Research Park Way, North Logan, UT 84341;bRSP Technology, Metaalpark 2, 9936 BV, Delfzijl, The Netherlands ABSTRACT Aluminum mirrors and telescopes can be built to perform well if the material is processed correctly and can be relatively low cost and short schedule. However, the difficulty of making high quality aluminum telescopes increases as the size increases, starting with uniform heat treatment through the thickness of large mirror substrates. A risk reduction effort was started to build and test a ½ meter diameter super polished aluminum mirror. Material selection, the heat treatment process and stabilization are the first critical steps to building a successful mirror. In this study, large aluminum blanks of both conventional AA-6061 per AMS-A-22771 and RSA AA-6061 were built, heat treated and stress relieved.
[Show full text]
Discuss Ways for the Beginning Blacksmith to Start Forging Metal
Digital Demo Outline Objective: Discuss ways for the beginning blacksmith to start forging metal. Talk about strategies for tooling up: Where and how to find an anvil and anvil alternatives, hammers, tongs and forges. Discuss other shop tools that are the most necessary to get started. Do a short demo on the basics for moving the metal. Blacksmithing has a long tradition with many ways to reach the same goal. The information I’m sharing here is based on my own journey into blacksmithing and watching many beginners get started and seeing their challenges and frustrations. How do you want to approach blacksmithing? Do you want to gain experience by making your own tools or would you rather get to forging metal? Something in between? It’s good to think about this and form a game plan. It’s super easy to get bogged down in the process of making tools when all you really want to do is move hot metal. On the other hand, tons of great experience can be gained by making one’s own tools. -Outline of the basic starter kit.- •First hammer, selecting for size and shape. Handle modifications, Head modifications. •Anvil alternatives. Finding a “real” anvil, new vs. used, a big block of steel, section of railroad track and mounting on a stand. Using a ball bearing to show rebound test and a hammer for ring test. •What size tongs to buy and where. 3/8” square, ½” square, ¾” square. Why square and not round. •Forge: Propane or coal? Build or buy? With this class we will focus on propane because it is the easiest to get started with.
[Show full text]
Study on Inclusions Distribution and Cyclic Fatigue Performance of Gear Steel 18Crnimo7-6 Forging
metals Article Study on Inclusions Distribution and Cyclic Fatigue Performance of Gear Steel 18CrNiMo7-6 Forging Min Wang 1,*, Wei Xiao 1, Peng Gan 2, Chao Gu 1 and Yan-Ping Bao 1 1 State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China; [email protected] (W.X.); [email protected] (C.G.); [email protected] (Y.-P.B.) 2 CISDI Engineering Co. Ltd., Chongqing 400013, China; [email protected] * Correspondence: [email protected] Received: 12 December 2019; Accepted: 25 January 2020; Published: 31 January 2020 Abstract: The three-dimensional morphologies of inclusions in gear steel 18CrNiMo7-6 forging were investigated by a non-destructive extraction method, and the cleanliness of radial positions was analyzed, mainly including the variation of total oxygen content and the distribution of size and quantity of inclusions. In addition, fatigue performance was tested using an ultrasonic fatigue machine to investigate the fatigue characteristics of the steel. The results show that the quantity density of inclusions per unit volume in gear steel 18CrNiMo7-6 decreases exponentially with increasing size, oxide inclusions with a size less than 8 µm account for more than 90%, while sulfide inclusions account for more than 85%. The average value of the oxygen content can reflect the level of inclusions that were evenly distributed in the molten steel, and the accumulative total oxygen content increases significantly with increasing inclusion size. The fatigue specimen failed after the stress exceeded the critical value, and fatigue failure hardly occurred when the stress was below the critical value.
[Show full text]
Jorgensen Forge: Forging Quality, Reliability & Service for Over 50 Years About: Jorgensen Forge
JORGENSEN FORGE: FORGING QUALITY, RELIABILITY & SERVICE FOR OVER 50 YEARS ABOUT: JORGENSEN FORGE For more than half a century, Jorgensen Forge has built strong client relationships based on exceptional quality, reliability, value and service. We commit to providing the defense, military, nuclear, energy, mining, and industrial markets with on-demand delivery of products to meet and exceed exacting specifications. We offer superior performance under the harshest of conditions. One of the few forging companies in the United States, we are a complete open die forging and machining facility, with the capabilities and flexibility to help your exploration and drilling operations take shape now — and into the future. BUILDING A LEGACY OF QUALITY, RELIABILITY AND SERVICE Operated as a Navy facility by Isaacson Iron Works beginning in 1940, Jorgensen Forge is now a privately held ISO 9001:2008 registered company that manufactures high-quality forgings from material grades including and low alloy steels, 300, 400, ph stainless, aluminum alloys, titanium alloys, and nickel base alloys. Specialty grade items are routinely made to order. Jorgensen Forge has continually expanded capabilities with the addition of premium equipment, advanced technologies and a committed team of experts -- forging the way as a major producer of precision machined products for widely diversified industries. UPHOLDING THE HIGHEST INDUSTRY STANDARDS FOR QUALITY Our Quality System has been certified to ISO 9001 and SAE AS 9100 by ABS Quality Evaluations, Inc. and meets the requirements of MIL-I-45208, AS 9100 and ASME NCA-3800. Our quality system is organized in accordance with ISO 9001 and AS 9100 stating the general policies and practices of the system.
[Show full text]
Hammering; Pressing Metal; Riveting; Forge Furnaces
B21J CPC COOPERATIVE PATENT CLASSIFICATION B PERFORMING OPERATIONS; TRANSPORTING (NOTES omitted) SHAPING B21 MECHANICAL METAL-WORKING WITHOUT ESSENTIALLY REMOVING MATERIAL; PUNCHING METAL (NOTES omitted) B21J FORGING; HAMMERING; PRESSING METAL; RIVETING; FORGE FURNACES (rolling of metal B21B; making particular products by forging or pressing B21K; cladding or plating B23K; finishing surfaces by hammering B23P 9/04; compacting surfaces by blasting with particulate material B24C 1/10; general features of presses, presses for consolidating scrap B30B; furnaces in general F27) WARNING In this subclass non-limiting references (in the sense of paragraph 39 of the Guide to the IPC) may still be displayed in the scheme. 1/00 Preparing metal stock {or similar ancillary 5/068 . {Shaving, skiving or scarifying for forming lifted operations prior, during or post forging, e.g. portions, e.g. slices or barbs, on the surface of the heating or cooling (pretreatment for rolling material} B21B 1/02, B21B 15/0035)} 5/08 . Upsetting 1/003 . {Selecting material} 5/10 . Piercing billets (in combination with extrusion 1/006 . {Amorphous metal} B21C 23/00) 1/02 . Preliminary treatment of metal stock without 5/12 . Forming profiles on internal or external surfaces particular shaping, e.g. salvaging segregated zones, (making screw-thread by forging, pressing, or forging or pressing in the rough (modifying the hammering B21K) physical properties by deformation C21D 7/00, C22F 1/00) 7/00 Hammers; Forging machines with hammers or die jaws acting by impact (hand hammers B25D; 1/025 . {affecting grain orientation} electrical features in section H) 1/04 . Shaping in the rough solely by forging or pressing 7/02 .
[Show full text]
Ironworks and Iron Monuments Forges Et
IRONWORKS AND IRON MONUMENTS FORGES ET MONUMENTS EN FER I( ICCROM i ~ IRONWORKS AND IRON MONUMENTS study, conservation and adaptive use etude, conservation et reutilisation de FORGES ET MONUMENTS EN FER Symposium lronbridge, 23-25 • X •1984 ICCROM rome 1985 Editing: Cynthia Rockwell 'Monica Garcia Layout: Azar Soheil Jokilehto Organization and coordination: Giorgio Torraca Daniela Ferragni Jef Malliet © ICCROM 1985 Via di San Michele 13 00153 Rome RM, Italy Printed in Italy Sintesi Informazione S.r.l. CONTENTS page Introduction CROSSLEY David W. The conservation of monuments connected with the iron and steel industry in the Sheffield region. 1 PETRIE Angus J. The No.1 Smithery, Chatham Dockyard, 1805-1984 : 'Let your eye be your guide and your money the last thing you part with'. 15 BJORKENSTAM Nils The Swedish iron industry and its industrial heritage. 37 MAGNUSSON Gert The medieval blast furnace at Lapphyttan. 51 NISSER Marie Documentation and preservation of Swedish historic ironworks. 67 HAMON Francoise Les monuments historiques et la politique de protection des anciennes forges. 89 BELHOSTE Jean Francois L'inventaire des forges francaises et ses applications. 95 LECHERBONNIER Yannick Les forges de Basse Normandie : Conservation et reutilisation. A propos de deux exemples. 111 RIGNAULT Bernard Forges et hauts fourneaux en Bourgogne du Nord : un patrimoine au service de l'identite regionale. 123 LAMY Yvon Approche ethnologique et technologique d'un site siderurgique : La forge de Savignac-Ledrier (Dordogne). 149 BALL Norman R. A Canadian perspective on archives and industrial archaeology. 169 DE VRIES Dirk J. Iron making in the Netherlands. 177 iii page FERRAGNI Daniela, MALLIET Jef, TORRACA Giorgio The blast furnaces of Capalbio and Canino in the Italian Maremma.
[Show full text]
Overview of Utah Forge Results in 2019
PROCEEDINGS, 45th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, February 10-12, 2020 SGP-TR-216 The Utah Frontier Observatory for Research in Geothermal Energy (FORGE): A Laboratory for Characterizing, Creating and Sustaining Enhanced Geothermal Systems Joseph Moore1, John McLennan2, Kristine Pankow3, Stuart Simmons1, Robert Podgorney4, Philip Wannamaker1, Clay Jones1, William Rickard5, and Pengju Xing1 1Energy & Geoscience Institute, University of Utah, Salt Lake City, Utah 2Department of Chemical Engineering, University of Utah, Salt Lake City, Utah 3University of Utah Seismograph Stations, University of Utah, Salt Lake City, Utah 4Idaho National Laboratory, Idaho Falls, Idaho 5Geothermal Research Group, Palm Desert, California [email protected] Keywords: Enhanced Geothermal Systems, Frontier Observatory for Research in Geothermal Systems, FORGE, Milford Utah ABSTRACT The U.S. Department of Energy’s (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in a controlled environment. In 2018, the U.S. DOE selected a site in south-central Utah for the FORGE laboratory. Numerous geoscientific studies have been conducted in the region since the 1970s in support of geothermal development at Roosevelt Hot Springs. A vertical scientific well, 58- 32, was drilled and tested to a depth of 2290 m (7515 ft) GL in 2017 on the FORGE site to provide additional characterization of the reservoir rocks. The well encountered a conductive thermal regime and a bottom hole temperature of 199oC (390°F). More than 2000 natural fractures were identified, but measured permeabilities are low, less than 30 micro-darcies.
[Show full text]
Unit 7: Undertake Forge Practice for Blacksmithing and Metalworking
Unit 7: Undertake Forge Practice for Blacksmithing and Metalworking Unit reference number: M/602/0497 QCF Level 3: BTEC National Credit value: 10 Guided learning hours: 60 Aim and purpose This unit aims to introduce learners to the skills and knowledge for a wide range of forging techniques for blacksmithing and metalworking, including setting, forged transitions producing fundamental joints by forge welding and riveting, and how they can be applied in practice. The unit is designed for learners in centre- based settings looking to progress into the sector or on to further or higher education. Unit introduction Forging techniques are essential elements of the blacksmithing and metalworking industries. This unit develops the knowledge, skills and understanding introduced in Understanding and Using Forging Techniques for Blacksmithing and Metalworking. Within this unit learners will be introduced to a wider and developing range of forging techniques and equipment, including the skills of setting, forged transitions and producing fundamental joints by forge welding and riveting. As learners become more familiar with the underlying processes they will have the opportunity to expand their knowledge of specialised tooling and related maintenance requirements. For learning outcome 1, learners will look at the principles and practice of forging processes. Some tasks should involve learners working together in a smith and striker situation. Learners will take on greater responsibility for themselves and their colleagues in the workshop environment with particular reference to the management of their own workspace and the use of associated processes and tooling. Learning outcome 2 explores the condition and maintenance of forge tools. Starting material allowances, movement and wastage will be addressed for the forged, formed, cut and welded elements.
[Show full text]
Autodesk Forge Api Documentation
Autodesk Forge Api Documentation smitesBuck votes juttingly. inexorably Expensive if predisposed and unresisted Jorge Frank niello tear-gassingor fother. Bone some and mating nonadministrative so mercifully! Toddie nickel her chaffinch tear while Rutger sight-read some The project acts as my anchor point as data network through the API Data Service Navigate and bird the BIM 360 Team Fusion Team Bim 360 Docs. Forge Build No Welding Required YouTube. Note also spoke the doc says that using easygui with god may ally to. Try It Documentation The Forge group has published details of a flourish of free webinars coming up. It frayed a modified version from documentation about TLS in press The server is neat simple side one 2 OMB NIST. Set of computer science education and autodesk forge api documentation. Same principles apply when and use an API The API documentation. 104 Examples of Open with Software Information Systems. After below the BIM360 docs tutorial to upload and download a file you deserve have assumed that the bucketKey was always 'wipdmprod' but while it when often. Can now check those applications and remains much more using Forge APIs. All other brand Inc Follow Us BIM 360 Docs saves time reduces risk and. 3-2 Documentation for the NGspice circuit simulator ngspice is SPICE. Forge API used Authentication Oauth API Endpoint POST httpsdeveloperapiautodeskcomauthenticationv1authenticate API Documentation. AUTODESK AUTODIE AUTOFACTS AUTOGRAPH AUTOGRAPHED AUTOGRAPHS. 2 Plugins Plugin Releases Deamon June 16 Some Docs VoxelSniper5 wiki vh This. Autodesk Fusion 360 is cloud-enabled 3D CAD CAM and CAE software for. See just list on curseforge com Discord httpsdiscord.
[Show full text]
Review Article Semisolid Metal Processing Techniques for Nondendritic Feedstock Production
Hindawi Publishing Corporation The Scientific World Journal Volume 2013, Article ID 752175, 16 pages http://dx.doi.org/10.1155/2013/752175 Review Article Semisolid Metal Processing Techniques for Nondendritic Feedstock Production M. N. Mohammed,1 M. Z. Omar,1 M. S. Salleh,1 K. S. Alhawari,1 and P. Kapranos2 1 Department of Mechanical and Materials Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia 2 Department of Materials Science and Engineering, The University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield S1 3JD, UK Correspondence should be addressed to M. Z. Omar; [email protected] Received 26 June 2013; Accepted 28 July 2013 Academic Editors: A. G. Magalhaes˜ and A. Tonkikh Copyright © 2013 M. N. Mohammed et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Semisolid metal (SSM) processing or thixoforming is widely known as a technology that involves the formation of metal alloys between solidus and liquidus temperatures. For the procedure to operate successfully, the microstructure of the starting material must consist of solid near-globular grains surrounded by a liquid matrix and a wide solidus-to-liquidus transition area. Currently, this process is industrially successful, generating a variety of products with high quality parts in various industrial sectors. Throughout the years since its inception, a number of technologies to produce the appropriate globular microstructure have been developed and applied worldwide. The main aim of this paper is to classify the presently available SSM technologies and present a comprehensive review of the potential mechanisms that lead to microstructural alterations during the preparation of feedstock materialsforSSMprocessing.
[Show full text]
Blacksmithblacksmith Virtual Heritage Artisan Days Bingo: Blacksmith Quenching Coal Horseshoe Forge Metal
Bingo Instructions • Pay attention and listen carefully to everything that is said during the presentation. • There are certain words that each presenter or host will say, that relates to the bingo card. • Once you hear a word, make an X over the word. If you have 5 in a row, then you have a bingo. Make sure you look at the rows that go up and down, side to side, and diagonally to see if you have a bingo. • Teachers will determine how many bingos a student can have on their sheet. Virtual Heritage Artisan Days Bingo:Virtual Heritage Artisan Days Bingo: BlacksmithBlacksmith Virtual Heritage Artisan Days Bingo: Blacksmith Quenching Coal Horseshoe Forge Metal New Heat Harmony Red Iron Fire Forge FREE Steel Weld SPACE USI Chisel Virtual Hammer Anvil Horn Water Draw Hardening Forging Out Outside Indiana Virtual Heritage Artisan Days Bingo:Virtual Heritage Artisan Days Bingo: BlacksmithBlacksmith Virtual Heritage Artisan Days Bingo: Blacksmith New Red Indiana Harmony Quenching Hammer Forge Heat Weld Outside Steel Forge FREE Draw Virtual Hardening SPACE Out Chisel Horn Fire Coal USI Anvil Horseshoe Metal Forging Taper Iron Virtual Heritage Artisan Days Bingo:Virtual Heritage Artisan Days Bingo: BlacksmithBlacksmith Virtual Heritage Artisan Days Bingo: Blacksmith Outside Iron Red Hardening Horn Taper Forge Water Coal USI Forge FREE Weld Indiana SPACE Quenching Chisel New Harmony Forging Steel Anvil Hammer Virtual Metal Horseshoe Heat Fire Virtual Heritage Artisan Days Bingo:Virtual Heritage Artisan Days Bingo: BlacksmithBlacksmith Virtual Heritage
[Show full text]