User Manual STEP 1: Connect the Travel Charger Using USB Cable to the Charging Port of the Headset
Total Page:16
File Type:pdf, Size:1020Kb
BRIEF INTRODUCTION Note: a. Bluetooth® Wireless Communication Technology • When the White Light is ON, the headset is charging. ® Bluetooth is a standard of close range radio communication technology that was drawn up by Ericsson, • When the White Light turns OFF or changes to blue, the headset is fully charged. iBall Kydz iBall Kydz Star IBM, Intel, Nokia and Toshiba. Through Bluetooth® Technology, we can achieve the highest transmission • It takes approximately 4 hours to fully charge the headset. rate among mobile phone, computer, printer, PDA and other devices. The maximum transmission range Star Wired Headset of Class II devices is 10 meters. b. About iBall Kydz Star BT Warning: iBall Kydz Star BT Bluetooth® Headset has the following features: 1. The battery is recycled. • Brief introduction........................................................................................ 1 2. Do not dispose of the battery in fire, as it may cause explosion. • Answer call, End call, Redial last call 1. About iBall Kydz Star............................................................................ 2 • Next Track and Previous Track • Before Using............................................................................................... 2 • Play / Pause a. Overview............................................................................................. 2 • Voice prompt alerts • Redial last call b. Charging the battery of the headset...................................................... 2 Multimedia control like play/pause, Next track, Previous track • Basic Operation........................................................................................... 3 Note: Some of these functions need to your Bluetooth enabled device to support. a. Switching On / Off the headset............................................................. 3 • Care and Maintenance.................................................................................5 BEFORE USING BASIC OPERATION • Features & Specifications............................................................................5 a. Switching ON / OFF the Headset a. Charging Battery of the Headset: Function Operation LED Indicator Light First time charging: This Headset has a built-in-rechargeable battery; it is recommended to charge the Blue LED is on for 1 battery fully before using it for the first time. Long Press MFB Button for 2-3 Seconds Turning ON second White LED is on for 1 Turning OFF Long Press MFB Button for 4 Seconds LOW Power: The Headset will switch OFF automatically when the battery is fully drained. At this time you second would require to charge the battery of Headset. After switching on the headset, it will search for last pairing device Enter pairing mode White and Blue LEDs and after 7 to 8 seconds it will automatically enter into pairing mode. Flash Alternately b. Charging the Headset with Travel Charger (Optional) ® Thank you for purchasing iBall Stereo Bluetooth Headset, iBall Kydz Star BT. Please read this user manual STEP 1: Connect the travel charger using USB cable to the charging port of the headset. Remark: The headset will switch Off automaticaly if no device(s) are connected after 5 minutes 30 carefully before using it. STEP 2: Plug the travel charger in the standard AC Power outlet. seconds in order to save power. Charging the Headset with USB Cable STEP 1: Connect charging cable with charging port of the headset. ® Note: Fully charge the speaker, before using it for first time. b. Pairing the Headset with Bluetooth enabled device STEP 2: Insert USB charging cable into USB port of PC / Laptop. You have to pair the Bluetooth headset with BT enabled device before using the headset for the first time. Specific pairing procedures may vary with different Bluetooth enabled devices. Please refer to your Bluetooth enabled device User Manual for further information. V1.0.0 User Guide 1 2 The steps are as follows: Button Operation CARE AND MAINTENANCE SPECIFICATIONS a. Pairing with Bluetooth® BT enabled device : Please read the following suggestions carefully, these will help you fulfill any warranty obligations to enjoy • Working Time: Up to 10 Hrs. 1. Keep the headset and Bluetooth® BT enabled device within 1 meter range. Function Status of headset Operation the product for prolonged duration. • Stand By Time: 200 hrs. 2. Make sure that the headset is OFF. Answer / End a Call Conversation mode Single Press MFB (Power) • Keep it dry and don’t put it in the damp place, so as not to affect the internal circuit of the Product. • Charging Time: About 2.5 hrs. 3. Switch ON the headset until you see the Blue & White LED Glowing every second. It automatically gets Radial Last Number Standby Mode Single Press MFB (Power) • Don’t put the product under the sunlight or place in hot areas. High temperature will shorten the life of Volume Up Conversation mode Single Press ‘+’ Button in to pairing mode. electronic device, or might destroy the battery, or distort certain plastic material. Controls Volume Dawn Conversation mode Single Press ‘-’ Button ® ® 4. Switch ON the Bluetooth function of your BT enabled device and search for Bluetooth device. After Press Power Button Twice Quick to wake • Don’t expose the product in cold areas. It might damage the internal circuit board. • Power On/Off / Call End / Receive /Play / Pause been searched, select “iBall Kydz Star” in the Bluetooth® device list. Voice Assistance Standby Mode “SIRI” in iOS and “OK Google” in andriod • Don’t attempt to dismantle various components of the product. It might damage the product that would • Volume UP / Next Track phones lead to warranty void. • Volume Down / Previous Track 5. According to indication, enter password or PIN No: “0000”, and press the key “Yes” or “Confirm”. Can be use in Both Standby Single Press MFB (Power), But First need Voice Assistance • Do take proper care in handling the product so as to prevent it from falling off on the floor. 6. After successful pairing, select “iBall Kydz Star” in the Bluetooth® device list, and press, “Connect”. Mode and Conversation mode to configure Hubble app • Don’t use harsh chemicals or detergents to clean the product. In the Box After successful connection, the indicator light will flash every 5 seconds. • Don’t scrape the surface with sharp objects. • Headset – 1 N Remarks: If the product doesn’t work normally, please send it to the nearest iBall Service Center. The Staff assist • Charging Cable – 1 N • Not all the Bluetooth enabled devices support all the function listed above. Remark: • Some functions and indication tones may vary with different BluetoothR enabled devices. you to solve the problem. • User Manual – 1 N • For some BT enabledR devices, you have to choose “Transfer the sound through BluetoothR ®” in the •The Pairing mood will last for 5 minutes 30 seconds. The headset will switch to standby mode automatically if it not paired with any device after 5 minutes 30 seconds. If you want to continue to pair “setting” of music player of the BT enable device and select “iBall Kydz Star” in the device list. The music R the headset with a Bluetooth device, please switch Off the headset first, and then re-pair according to the will be transmitted to the headset instead of speakers. Please refer to the instructions of your BT enabled R FEATURES & SPECIFICATIONS steps “1 - 6”above. device’s User Manual for further information. • Music quality may degrade if Bluetooth bettery gets low. Features • Noise cancellation depends on surrounding environment. • After the pairing is sucessful, the headset and mobile phone will be remember each other ; no need to •Safe sound for Kids (Less than 85 dB) repair when using it next time. •Stereo BT headset with MIC •Specially designed for Kids • Everytime you switch On the headset, it will connect with last connected device automatically. •Comfort fit for long time use If you wwant pair it with other devices, please switch Off Bluetooth function of last connected devices.first, then pair the headset with new device acoriding to steps of A above or both. •Easy to use controls •Built-in rechargeable battery (Charge through USB) Specifications Please download iBall Connect App for Android® devices from Play Store® to find details of • BT Version: V 4.2 + EDR service centres nearby and also other iBall product details. • BT frequency • Frequency Range: 20 Hz ~ 20 KHz + • Speaker Sensitivity: 85 dB ± 3dB Note: • Microphone Sensitivity: -42 dB • * Working Time mentioned is based on user’s operations and type of music played. • Speaker Driver: Φ3 Cm. • . Product specifications are subject to change without notice. • All trademarks, logos, brands & product names are properties • Speaker Impedance: 32 ± Ohms of their respective owners. • Warranty: All iBall products are governed by iBall Warranty terms. Refer www.iBall.co.in for details. • This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our •Effective Range: Up to 10 m website (www.iBall.co.in/e-waste) • For any technical help on iBall products, please contact [email protected] 3 4 5 www.iBall.co.in 1 year warranty.