PRU Controls Brochure

Total Page:16

File Type:pdf, Size:1020Kb

PRU Controls Brochure Control Systems The most advanced sensor-based controls. Now integrated into our most popular fixtures. s u o i n e g n i C o S-Oc c™ Occupancy Sensors for Stairways. A Step Forward. Stairwells and other interior walkways present n another opportunity in the search for energy savings. As emergency exits and high-security pedestrian Prudential Ltg. passageways, and stairways require high-performance, reliable lighting. Yet seldom are these spaces occupied, t r has always been a smart choice for architects and and leaving them fully illuminated 24/7 is no longer a sustainable practice. o designers who demand simple, cost-effective solutions that don’t 4 l compromise performance. And when the challenge is finding more S energy-efficient ways to light classrooms and workspaces, Prudential Ltg.’s stairwell fixtures are admired for their performance, y durability and design aesthetics. Now, you can add one more benefit to s Prudential is again the place to turn. Many of our best-selling t e the list: energy savings. The Wal14, Wal12, Snap and P1220 now offer fixtures are now available with control sensors integrated directly m S-Occ ™ integrated occupancy ultrasonic sensors by Wattstopper/Legrand. into the housing. Our fixtures arrive at the jobsite with the controls s pre-programmed, so there’s no complex commissioning required T h of the contractor. With integrated controls, Prudential fixtures are e m o s t ready to start cutting energy costs right out of the box. And that Mounted at 8’, the a d ultra-sonic sensors v a have a range of 20’. n c makes perfect sense. ™ e The compact S-Occ A 20% overlap in d s sensor panel is both coverage is e n effective and discrete. recommended. s o r - b a s e d Watching out for energy waste. c o n t Think about all the energy that’s typically wasted illuminating lighting the stairways the instant someone enters a stairwell. r o l s seldom-used stairwells. What if you could light those areas Available affixed to the body of four of our most popular . N ™ o only when they’re actually occupied? The potential savings Prudential Ltg. Fixtures, the ultra-sonic S-Occ sensors w i Saving Energy, Cutting Costs, and Reducing Emissions. And buildings are the single largest consumer of would be significant, without losing the essential security of help ensure stairwells can be lit efficiently. n t e g r Whether you’re working on an entirely new design or electricity, with GHG emissions projected to grow a t e the retrofit of an existing building, automatic lighting control faster than those from any other sector — from S-Occ ™ is available with the following fixtures: d i n t systems can dramatically cut energy use, lower operating around 33% today to 37% by 2030. o o u costs and reduce greenhouse gas emissions (GHG). r Here’s the good news: Improving energy efficiency in m o s In fact, an Intergovernmental Panel on Climate Change buildings could offset 85% of the projected incremental t p o p (IPCC) report identified electricity as the single largest demand for electricity. And thanks to the kind of innovation u l a r contributor to GHG emissions. you’ll find from Prudential, creating energy-efficient f i Wal14 Wal12 P1220 Snap x t u solutions is easier than ever. r e s . Stringent Codes Meet Aesthetic Flexibility. How to order. Start by choosing your luminaire from the list of fixtures available with S-Oc c™. With a wide range of Prudential fixtures now available Specify. Once you’ve chosen a fixture, determine which mode you want the sensors to operate: OCO – all lamps on/off using with integrated lighting controls, architects and designers program rapid-start ballast; OC2C – one lamp sensored, one lamp on; or OCDM – dim to 10% standby mode using 0-10V dimming ballast. are sure to find there’s a Prudential luminaire in compliance with today’s stringent energy codes. Yet in choosing a De-coding our part numbers: This symbol signifies products that offer control Prudential fixture, you’ll find it’s easy to meet your aesthetic Sample part#: options. The light we create, and how we create criteria as well. Our Pru15, M7 and Snap are just some S1 - 1T8 - 04' - TMW - 120 - SUR - OCDM - EML it, can ensure brighter days ahead for all of us. of the more popular Prudential designs that can be This describes a single 4’ Snap fixture with textured matte white finish, wall mounted, 120 volt, with integrated occupancy specified to include integrated lighting controls. sensor that dims to standby mode, with emergency battery. Prudential Ltg. 1737 East 22nd Street, Los Angeles, CA 90058 tel 213.746.0360 fax 213.741.8590 prulite.com RightLight ™ R-Oc c™ S-Oc c™ Sens e™ System Daylight Room & Row Small Space 123for Classrooms Harvesting Occ Sensor 4 Occ Sensor Problem: Lighting Problem: Overlighting a Problem: The lighting that’s Problem: While stairwells Classrooms properly when space when there’s ample left on in unoccupied rooms are critical passageways they’re occupied, shutting daylight available. Solution: is a major source of wasted for emergency evacuations, the lights off when they’re Fixtures from Prudential Ltg. energy. Solution: The fully lighting them 24/7 not. Solution: Prudential that incorporate a daylight integrated occupancy isn’t an efficient use of fixtures fitted with integrated harvesting sensor. As sensors in selected energy. Solution: Stairwell lighting controls. They available daylight reaches Prudential fixtures cut costs fixtures from Prudential incorporate occupancy sufficient levels, the control by dimming or shutting off featuring occupancy sensors sensors that switch off lights systems dim the electric the lights when no one is help cut operating costs in unoccupied rooms, and daylight harvesting sensors lights to conserve energy. using the space. and carbon emissions by that adjust light level lighting stairwells only automatically to dramatically when occupied. cut energy use in classrooms. prulite.com Order in the Classroom. Whether you’re retro-fitting an existing school building or specifying classroom fixtures for an entirely new facility, the Sense ™ System from Prudential Ltg offers a solution that uses 1 state-of-the-art wireless technology to deliver critical cost savings. Our Wave2 and Pru15 fixtures meet Fixture-integrated daylight or exceed CHPS (Collaborative for High sensor requires no additio- Performance Schools) standards for nal wiring. The photocell glare-free lighting, teacher control, triggers the lights to dim Wave2 Pru15 and energy efficiency. when levels exceed 45fc. Energy waste is a Ceiling-mounted PIR turn-off. The Sense™ occupancy sensor is Solar System starts saving powered and wireless. energy the moment It ships from the factory you flip the switch. pre-programmed so it requires no wiring and no commissioning on site. Optional whiteboard Teacher Control switches from General luminaire. to A/V Lighting mode, provides manual See P-40, P43, dimming of A/V lighting, and allows for P60, P63, P5900. 1-hour Occupancy sensor override. Wave2 average illumance ceiling uniformity watts/square footage General Lighting 49.9 2.3:1 .73 A/V Lighting Mode 23.0 N/A .37 Pru15 average illumance ceiling uniformity watts/square footage General Lighting 44.4 2.2:1 .73 A/V Lighting Mode 21.0 N/A .37 Reflectances: 85/60/30. Using high lumen T8 lamps. 18” suspension Prudential Ltg. 1737 East 22nd Street, Los Angeles, CA 90058 tel 213.746.0360 fax 213.741.8590 Knowing the right light. Prudential Ltg fixtures have long solar-power for its PIR occupancy sensors. Sense ™ is been a favorite choice of architects and designers seeking able to determine whether a classroom is occupied or not, performance and value in a classroom lighting solution. and deactivate the lighting as needed. Natural daylight is Now, there’s another reason to put Prudential at the top harvested when available, automatically dimming the of your list: the Sense ™ System. To meet the challenge of lighting from the appropriate fixtures. And because the cutting energy costs and helping to reduce emissions, system is wireless, it saves both material and the system employs advanced technologies, including manpower costs in its installation. Planning Information. Motion Sensors: Ceiling mounted occupancy sensor has a walking motion radius of just over 20’ feet of coverage, or about 1500 SF in a space with a 9-ft ceiling. Sensor is solar powered, with the charge lasting about 48 hours. Sensor is set to power off all lamps if the room is unoccupied for 10 minutes. Luminaires are manually switched on at the classroom door, or teacher control switch, so that lights do not trip on unintentionally. Daylight Harvesting Sensors: Fixture integrated daylight harvesting sensors should be 20’ located over typical work surfaces, within 6-10 feet of the window. A typical daylighting zone is usually 15 feet in from the window wall. Specific site conditions 10’ will dictate the designation of dimming zones. 0’ If fixture rows are parallel to windows, one daylight sensor can control the entire window row. Inside fixture row may or may not need a daylight sensor, depending on 10’ room conditions. One sensor can control up to twenty 0-10V dimming ballasts. In the Sense ™ System, only the outer lamp rows are controlled by the daylight 20’ sensors. The center lamp row is dimmed manually at the Teacher Control Station. prulite.com ™ How to order Sense System. Transforming classroom lighting with the energy savings of our Sense ™ System controls is easy. It only takes a few steps, outlined in detail below. Before you can specify the right solution for your needs, you’ll need to start by determining the type of rows in each classroom.
Recommended publications
  • NONRESIDENTIAL LIGHTING and ELECTRICAL POWER DISTRIBUTION a Guide to Meeting Or Exceeding California’S 2016 Building Energy Efficiency Standards
    NONRESIDENTIAL LIGHTING AND ELECTRICAL POWER DISTRIBUTION A guide to meeting or exceeding California’s 2016 Building Energy Efficiency Standards DEVELOPED BY THE CALIFORNIA LIGHTING TECHNOLOGY CENTER, UC DAVIS © 2016, Regents of the University of California, Davis campus, California Lighting Technology Center Guide Prepared by: California Lighting Technology Center (CLTC) University of California, Davis 633 Pena Drive Davis, CA 95618 cltc.ucdavis.edu Project Partners: California Energy Commission Energy Code Ace This program is funded by California utility customers under the auspices of the California Public Utilities Commission and in support of the California Energy Commission. © 2016 Pacific Gas and Electric Company, San Diego Gas and Electric, Southern California Gas Company and Southern California Edison. All rights reserved, except that this document may be used, copied, and distributed without modification. Neither PG&E, Sempra, nor SCE — nor any of their employees makes any warranty, express of implied; or assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any data, information, method, product, policy or process disclosed in this document; or represents that its use will not infringe any privately-owned rights including, but not limited to patents, trademarks or copyrights. NONRESIDENTIAL LIGHTING & ELECTRICAL POWER DISTRIBUTION 1 | INTRODUCTION CONTENTS The Benefits of Efficiency ................................. 5 About this Guide ................................................7
    [Show full text]
  • Simply Inspired
    Simply Inspired ArcForm...a new dimension in LED lighting performance. ArcForm Soft. Subtle. Sophisticated. 2 Good Looking Inspired by the classic curve, this luminous architectural form is a natural fit for any space. Hard Working An innovative product design delivering a 3D batwing distribution to provide exceptional lighting performance and energy savings. Committed An uncompromising lighting solution utilizing advanced LED luminaire engineering, covered by a 5 year warranty and backed by world class support from Philips Ledalite. 3 3D Symmetrical A New Dimension Batwing In Lighting Performance Distribution Advanced LED optical design and patented MesoOptics technology combine to deliver wider fixture spacing while ensuring optimal light ArcForm is a highly efficacious, fully levels, perfect uniformity, and maximum energy savings. luminous fixture with brilliant color rendering and an innovative 3D symmetrical batwing lighting distribution. It delivers pure, white light—free of glare, color shifts, hotspots or striations, with unparalleled uniformity, maximizing visual comfort and energy savings. Scan to view ArcForm video or visit arcform3d.com 4 HOW IT WORKS Light emitted from highly efficacious LED arrays is reflected by 98% efficient upper reflectors and microcellular PET perimeter reflectors. The light then mixes inside the optical cavity, passes through MesoOptics film and emerges from the ArcForm concave lens in a precisely controlled 3D symmetrical batwing distribution. LED DRIVER Multiple lumen packages, 0-10V dimming, battery pack options, UPPER REFLECTOR and accessible from below for 98% efficient Miro Silver reflects easy maintenance. light out of the fixture. PERIMETER REFLECTORS LED ARRAYS Highly efficient microcellular PET Highly efficacious Philips material mixes light within the platform LED arrays optical cavity.
    [Show full text]
  • Daylight Harvesting Methods and Practice by Bryan Palmer, ETC Architectural Controls Product Manager
    White Paper Daylight Harvesting Methods and Practice by Bryan Palmer, ETC Architectural Controls Product Manager Introduction Daylighting for energy savings and conservation has become common design practice. Daylight harvesting is something that is required by some energy codes, and soon to be adopted by oth- ers. Instead of being encouraged by energy programs, it’s becoming required. California’s Title 24, IECC 2012, and ASHRAE 90-1 already have daylighting guidelines; and they are likely to become more stick over the coming years. Most commercial buildings that have windows and skylights are required to have some type of daylight harvesting control in the adjacent area. Green sentiment and construction practices bring additional attention to energy saving practices like Daylighting, help to further acceptance of the practice, and grow the technology that makes it possible Daylight harvesting’s proposed value is simple: As natural light levels increase, electric light levels can be decreased to maintain an acceptable level of light in a space, and save energy (and mon- ey). Daylighting systems automate this process, removing the human element of control by using a light sensor that measures light levels and sends them to a controller that is connected to the lighting control system. The control system can then dim or switch electric lights in response to the measured level. The light sensor is typically small, and uses a light-sensitive photocell, input optics and an electron- ic circuit used to convert the photocell signal into a control signal. Light Sensors may be mounted on walls, ceilings and even as a part of light fixtures.
    [Show full text]
  • Daylighting Application and Effectiveness in Industrial Facilities
    Daylighting Application and Effectiveness in Industrial Facilities Brian McCowan, Energy & Resource Solutions, Inc. Daniel Birleanu, Energy & Resource Solutions, Inc. Natalie Hildt, Energy & Resource Solutions, Inc. ABSTRACT Historically, daylighting has been extensively used for the lighting of industrial spaces. Before the advent of practical mercury vapor and fluorescent lighting, the only available artificial lighting for industrial buildings was incandescent. The illumination of active industrial workspaces with incandescent lighting is difficult, so during the industrial revolution, architects utilized various daylighting strategies such as window walls, skylighting, monitors, etc. However, glazing technologies were also primitive compared with our modern glazing choices, and space conditioning and glare problems plagued day-lit spaces. When more efficient and effective artificial lighting became available, most older day-lit industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong comeback. Additionally, new controllable ballasts and automatic lighting controls make possible hybrid lighting systems that are able to provide optimal lighting under all environmental conditions. This paper will demonstrate discuss how the daylighting systems developed decades ago are being modernized to provide high quality, low-glare, uniform lighting, without the space conditioning penalties of the past.
    [Show full text]
  • Daylight Harvesting for Today's Buildings©
    Daylight Harvesting for Today’s Buildings© By: Sam Lallas ’ 310 Melvin Drive, Suite #19 Northbrook, IL 60062 I T: 312.376.0100 I F: 312.262.6390 I [email protected] _____________________________________________________________________________________ As technological advances facilitate much finer degrees of control over a building's internal Environment, the expectations of users for levels of comfort, controllability and energy efficiency have moved to take advantage of new possibilities. The result can be an almost symbiotic relationship, in which buildings are able to work with their occupants in a far more dynamic manner than has ever previously been possible. One aspect that is attracting great attention is in finding the optimum balance between natural and artificial light. The energy efficiency of a building and occupant comfort can be profoundly affected by the building's orientation to the sun. Sunlight falling on a building façade usually results in both heat and light transfer to the interior. While these may be welcomed during winter, they often cause problems through overheating and glare in summer. The focus historically, especially in hotter climates, has therefore tended towards mitigation strategies against the effects of solar radiation. Fixed shading can prove effective in this respect, particularly in terms of blocking solar heat, which would otherwise lead to the need for additional cooling and the requisite energy to provide that cooling. However, emerging green targets and occupant comfort factors have spawned a new appreciation for the benefits of natural light, leading to the practice now known as 'daylight harvesting'. This has shifted the focus towards building designs that are flexible enough to protect against the summer heat, while still able to embrace natural light and heat at other times.
    [Show full text]
  • A Novel Method for Daylight Harvesting Optimization Based on Lighting Simulation and Data
    ________________________________________________________________________________________________ A novel method for daylight harvesting optimization based on lighting simulation and data- driven optimal control Tullio de Rubeis1, Niko Gentile2, Francesco Smarra3, Alessandro D’Innocenzo3, Dario Ambrosini1, Domenica Paoletti1 1 Dept. of Industrial and Information Engineering and Economics, Università degli Studi dell’Aquila, 67100 L’Aquila, Italy 2 Dept. of Architecture and the Built Environment, Lund University, 22100 Lund, Sweden 3 Dept. of Information Engineering, Computer Science and Mathematics, Università degli Studi dell’Aquila, 67100 L’Aquila, Italy Abstract Dubois, 2017). In such cases, the purpose of lighting To date, the best daylighting assessment technique is control may shift from mere energy saving to provided by climate-based simulation tools, which require improvement of the luminous environment, which is remarkable efforts to create and calibrate realistic models. today more possible than even given the intrinsic design The data-driven approaches represent an interesting flexibility of LEDs. opportunity to support the physics-based modelling. This work proposes a novel method aimed at the optimization Therefore, the lighting control system purpose becomes of energy use and luminous environment for a set of twofold: lighting control system solutions. The method processes • saving energy when loads for functional illumination experimental data of occupancy and lighting switch on/off are high (de Rubeis et al., 2017); events
    [Show full text]
  • Lighting Controls
    LIGHTING CONTROLS HUMIDITY CONTROLS LIGHTING Kele Provides System and Zone Controls, with a Wide Variety of Peripheral Sensors and Switches. DLM Series | p. 615 AF16 Series | p. 664 LX-24 | p. 624 WSD Series | p. 637 CI-24 | p. 626 ET Series | p. 674 LIGHTING CONTROLS Products manufactured MODEL/SERIES PAGE in the United States Emergency Lighting Control ELCU-100 — WattStopper Emergency Lighting Control . 666 Products that are ELCU-200 — Emergency UL924 Bypass/ Shunt Relays . 668 new to the catalog ESR Series — Functional Devices UL924 Emergency Bypass / Shunt Relays . 670 Light Sensors MK7-B Series — PLC-Multipoint Celestial Self-Contained Ambient Light Sensors, Voltage Based . 643 PSR-1, PSR-1-T — Kele Photo-Sensitive Resistor . 645 K, LC Series — Photo Switches . 647 EM Series — Photo Switches . 649 MAS Series — PLC-Multipoint Self-Contained Ambient Light Sensors, Current Based . 650 Lighting Contactors and Relays HDR — Relay 5 Wire with Override and Connector . 660 RR-7, RR-9 — GE Lighting Relays . 661 2R7CDD, 2R9CDD — ILC Lighting Relays . 663 AF16 Series — ABB Lighting Contactors . 664 LIGHTING CONTROLS LS7K Series — AEG Lighting Contactors . 665 LMCP Series | p. 613 Lighting Panels and Control Products RP Basic Series — BlueRidge Relay Panels . 609 ZC Basic Series — BlueRidge Lighting Zone Controller . 611 LMCP Series — WattStopper Lighting Integrator Panels with Digital Lighting Management (DLM) Support . 613 DLM Series Digital Lighting Management — Digital Lighting Controls . 615 LC8 Series — WattStopper Modular Contractor Panel . .. 618 CX Series Commercial Lighting Control Panels — Standalone Programmable Lighting Control Panel . 620 ILC Apprentice II — Programmable Lighting Control Panel . 622 PIL-1 — Kele Pulse Initiator . 658 LDIM2 — Kele Fluorescent Dimming Control Module .
    [Show full text]
  • Maximizing Energy Savings with New Technologies in Lighting and Lighting Controls
    Maximizing Energy Savings with New Technologies in Lighting and Lighting Controls Mike Matour, National Sales Manager - Energy Lutron Electronics Agenda • FEMP Promising Technologies • Today’s Lighting Controls • Why Controls? • New Technologies - Wireless Solutions • New Technologies - Advanced Controls • LEDs – How to control? #1 Single Zone Lighting Controls Multi-Zone Lighting Controls Advanced Lighting & HVAC Control Systems Total Light Management 8 Simple Light Control Strategies / ECMs Occupancy/Vacancy Sensing: Automatically turn lights off or dim down when space is vacant. Integrate HVAC locally/digitally. Daylight Harvesting: Automatically adjust light levels based on the amount of daylight in the space. High end trim/Tuning: Set target light level based on occupant requirements in the space. Scheduling: Lights automatically turn off or are dimmed at certain times of the day or based on sunrise or sunset. 8 Simple Light Control Strategies / ECMs (cont) Personal Light Control: Allow users in the space to select the correct light levels for the desired task. Controllable Window Shades: Allows users to control daylight for reduced solar heat gain and glare. Demand Response: Reducing lighting load at times of peak electricity pricing. Reduce HVAC load at Peak Times. Plug-load Control: Automatically turning task lighting and other plug loads off when they are not needed. Why Lighting Controls? Quantifiable Other Benefits • Tuning / Dimming • Productivity • Occupant Sensing • Maintenance • Day-lighting • Sustainability/LEED • Personal Control • Property Value • HVAC Savings • Flexibility • Window Shading • Demand Response • Plug Load Control Total Light Management - Case Study New York Times •Measured LPD, Lighting Power Density – Designed at 1.28 W/ft2 – Operating at 0.36 W/ft2 •Seasonal data reflects yearly lighting energy savings of 72% “We designed our building to use 1.28 watts per square foot of lighting power,” Hughes said.
    [Show full text]
  • A Review on Effective Use of Daylight Harvesting Using Intelligent Lighting Control Systems for Sustainable Office Buildings in India
    sustainability Review A Review on Effective Use of Daylight Harvesting Using Intelligent Lighting Control Systems for Sustainable Office Buildings in India Gnana Swathika Odiyur Vathanam 1 , Karthikeyan Kalyanasundaram 2, Rajvikram Madurai Elavarasan 3,* , Shabir Hussain Khahro 4 , Umashankar Subramaniam 5,* , Rishi Pugazhendhi 6 , Mehana Ramesh 1 and Rishi Murugesan Gopalakrishnan 1 1 School of Electrical Engineering, VIT Chennai, Chennai 600127, India; [email protected] (G.S.O.V.); [email protected] (M.R.); [email protected] (R.M.G.) 2 Larsen and Toubro Limited, Chennai 603111, India; [email protected] 3 Clean and Resilient Energy Systems (CARES) Laboratory, Texas A&M University, Galveston, TX 77553, USA 4 Department of Engineering Management, College of Engineering, Prince Sultan University, Riyadh 11586, Saudi Arabia; [email protected] 5 Department of Communications and Networks, Renewable Energy Laboratory, College of Engineering, Prince Sultan University, Riyadh 11586, Saudi Arabia 6 Department of Mechanical Engineering, Sri Venkateswara College of Engineering, Chennai 602117, India; [email protected] Citation: Odiyur Vathanam, G.S.; * Correspondence: [email protected] (R.M.E.); [email protected] (U.S.) Kalyanasundaram, K.; Elavarasan, R.M.; Hussain Khahro, S.; Abstract: Lighting is a fundamental requirement of our daily life. A lot of research and development Subramaniam, U.; Pugazhendhi, R.; is carried out in the field of daylight harvesting, which is the need of the hour. One of the most Ramesh, M.; Gopalakrishnan, R.M. A desirable attributes of daylight harvesting is that daylight is available universally and it is a very Review on Effective Use of Daylight clean and cost-efficient form of energy.
    [Show full text]
  • Daylight Harvesting Control System a Novel and Open Source Approach to a Greener Future
    International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 3 Issue 9, September- 2014 Daylight Harvesting Control System A novel and open source approach to a greener future Raafe Karim Khan Sandhyalaxmi G Navada Department of Electrical & Electronics Assistant Professor: Manipal Institute of Technology, Manipal University Department of Electrical & Electronics Manipal, India Manipal Institute of Technology, Manipal University Manipal, India Abstract— A lot is being talked about renewable energy, green II. DAYLIGHTING energy, energy which is sustainable and inexpensive. The highlight in the 21st century has been the advent of growing A. Daylight factor energy needs, as our world continues to grow the need to Daylight factor in lay man terms is basically the amount conserve and effectively use our resources is tracing an of natural daylight in a room on account of transmission exponential path. Current set ups in industry and residential through windows or other media if present. It is premises are bringing rain water harvesting into their design, mathematically stated as but they are leaving another source of energy whose potential 퐼푛푡푒푟푛푎푙 푖푙푙푢푚푖푛푎푛푐푒 is as enormous as the size of our universe, light. Daylight 퐷푎푦푙푖푔푕푡 푓푎푐푡표푟 = ∗ 100 harvesting is an age old concept and can be traced down in 퐸푥푡푒푟푛푎푙 푖푙푙푢푚푖푛푎푛푐푒 history as it is embedded in the architecture of ancient (1) civilizations. However our focus is to bring the limelight to a new, effective, and inexpensive and result driven method which will harvest daylight in real time and will eventually B. Light as dual nature of matter lead to thermal and visual comfort. Light is considered to possess dual nature i.e.
    [Show full text]
  • Daylight Harvesting & Controls
    CRES12: Daylight Harvesting & Controls Presented by: Matthew Malone Northeast Sales Manager ® 20012 Crestron Electronics, Inc. Specifications subject to change. All copyrights and trademarks property of their respective owners. Update 08-16-12 Crestron Course #: CRES12: Daylight Harvesting & Controls Crestron Electronics, Inc. is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on completion of this program will be reported to CES Records for AIA members. Certificates of Completion for non-AIA members are available on request. This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. Questions related to specific materials, methods, and services will be addressed at the conclusion of this presentation. 2 Learning Objectives: By the end of this lecture the attendee will… 1. Define Daylighting and discuss the various benefits & concerns associated with it related to Commercial Architecture. 2. Define Daylighting Harvesting and gain an overview of the various Daylight Harvesting Techniques available. 3. Become familiar with the new changes in the Energy Codes that now require Daylight Harvesting. 4. Understand the terminology & control techniques necessary for a successful Daylight Harvesting system. 3 What is Daylighting? 4 What is Daylighting? • Daylighting’s objective is…to minimize the amount of artificial light thereby reducing electricity costs. • Daylighting is… the practice of placing windows or other openings and reflective surfaces so that during the day natural light provides effective internal lighting.
    [Show full text]
  • Daylight Harvesting for Commercial Buildings Guide
    LIGHTING BEST PRACTICES SERIES DAYLIGHT HARVESTING FOR COMMERCIAL BUILDINGS How to Meet and Exceed California’s Building Energy Efficiency Standards DEVELOPED BY THE CALIFORNIA LIGHTING TECHNOLOGY CENTER, UC DAVIS © 2018, Regents of the University of California, Davis campus, California Lighting Technology Center Guide Prepared by: Acknowledgements: California Lighting Technology Center (CLTC) The project team acknowledges all contributions to this University of California, Davis Guide, including the sponsor (SCE), reviewers (CEC), the 633 Pena Drive authors (CLTC) and UC Davis for their continuing support. Davis, CA 95618 cltc.ucdavis.edu Authors: Konstantinos Papamichael, PhD Project Partners: Nicole Graeber Hathaway, Project Manager California Energy Commission Adrian Ang, Graphic Designer Southern California Edison Georgia Mckenzie, Graphic Designer Part of the Lighting Best Practices Publication Series: Series includes: Nonresidential Lighting and Electrical Power Distribution Residential Lighting Nonresidential: What's New in the 2016 Title 24, Part 6 Code Residential: What's New in the 2016 Title 24, Part 6 Code What's New in the Title 20 Code FRONT COVER PHOTO: FULTON CENTER, NEW YORK CITY, NEW YORK ISTOCK.COM/CMART7327 This program is funded by California utility customers under the auspices of the California Public Utilities Commission and in support of the California Energy Commission. All rights reserved, except that this document may be used, copied, and distributed without modification. Neither Southern California Edison (SCE) nor any of their employees makes any warranty, express or implied; or assumes any legal liability or responsibility for the accuracy, completeness or usefulness of any data, information, method, product, policy or process disclosed in this document; or represents that its use will not infringe any privately-owned rights including, but not limited to patents, trademarks or copyrights.
    [Show full text]