DOCSLIB.ORG

Panther Chainsaw Mill

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Panther Chainsaw Mill Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news Panther Chainsaw Mill I have been wanting to get some form of portable mill for a long time now. Portable mills can be divided into two categories, bandsaw mills and chainsaw mills. After much research, I finally settled on a chainsaw mill. My reasons for this were as follows: Cost. An entry-level chainsaw mill costs a couple hundred dollars (not including the chainsaw), while an entry-level bandsaw mill costs a couple thousand. Portability. The chainsaw mill is obviously considerably smaller than a bandsaw mill and so has the edge on portability. Width of cut. Achieving a wider cut with a chainsaw mill is simply a matter of putting on a longer bar, assuming you have the power head to run it. A wider cut with a bandsaw mill starts to mean a much bigger and more expensive mill. Waste. While the waste due to the kerf of a chainsaw is considerably more than that of a bandsaw, this was not really a major factor for me. I don't plan on milling a huge amount of wood and I am milling the wood for my personal use, not for resale. Also the vast majority of the wood I will be milling will be reclaimed wood and won't cost me anything so a little bit wasted due to the thicker kerf is not a big deal. Ease of use. The bandsaw mill requires a whole lot less effort to use. Again, due to the limited amount of milling I will be doing, breaking a sweat with the chainsaw mill occasionally is not going to be a big deal. Having decided on a chainsaw mill I needed to decide on which model/brand. Taking into account many of the reasons above I decided to get an Alaskan Chainsaw style mill. I was all set to purchase one of the original Granberg Alaskan Chainsaw Mills when I came across the Panther Chainsaw Mill. Looking through the website and searching for reviews of the mill I liked what I saw and placed my order for the Panther Mill II, along with a 6' slabbing rail and an auxiliary oiler. I knew that the mill was made by a small outfit, a guy based here in Florida on the other side of the state. I also read that delivery was not always quickest as the mills were made to order. I was in no hurry so that didn't bother me. My mill actually took just over a month to arrive. I called about the order two weeks after it was placed and received an apology that he had some health issues. Another call two weeks later and I was told the mill was in production and would be shipped shortly. A couple of days later it arrived. It would have been nice to have received an email about the delay but at the end of the day it wasn't that big of an issue. 1 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news The following are my first impressions of the mill. Actually they are also my first impressions of milling in general. This is a totally new area to me. I have done a lot of research into it, but today was the first time I've seen any sort of mill in real life. So bear that in mind while reading, I'm just getting started with this! Opening the box, I saw the contents had been well packaged and it was obvious from the outset that the mill had been built well and by someone who cared about what he was doing. Just lying in the box it looked rock solid. No buyers remorse at all, I was very pleased with what I saw. As well as the obligatory warning page, a couple of pages of assembly and use instructions had been included. They were well written and it seemed like I wouldn't have much problem putting the mill together. It would have been nice to have had a couple more detail shots, but between the pictures and written instructions it was easy enough to figure out. The first step was to attach the skid bar to the main body and bar clamp/height adjuster. The later came in two halves and each had already been assembled. 2 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news Next I needed to attach the push bar to the main body. Finally I could loosen the bar clamps and slide the chainsaw into place. 3 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news Here are a couple of detail shots of the bar clamps at the tip of the bar and near the power head. 4 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news Two big bolts, one on each side of the main body, allow for the height adjustment. I initially set the assembly for an 8/4 cut. 5 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news A couple of technical specifications. I am a running a Stihl MS066 power head with a 32" bar. I got it used on eBay from a guy in Canada. The mill is the Panther Mill II 42", so I have the option of putting a longer bar on the chainsaw at some point in the future. The chain is a regular chain, not a ripping chain. I may be mistaken, but I did read that all a ripping chain does is provide a smoother cut. I'm not sure if it puts less stress on the chainsaw. As a lot of the wood I'll be milling will end up on the lathe, I'm not really concerned about getting as smooth a cut as possible. Now that it was fully assembled and all the bolts double checked it was time to head outside and put it to the test. I had been saving a log of maple for this occasion, it had probably been in my shop for about four to six months. The first step was to screw the slabbing rail to the log. This was going to provide a level and straight platform to register the first cut from. Here are some action shots of the first cut in progress. I got a bit caught up in the moment and totally forgot to put my hearing protection on! Just left the headphones lying off to the side, my bad. Unfortunately I also miscalculated by about a quarter-inch the depth of the screws fixing the slabbing rail to the log. This after specifically reading in the instructions to watch out for this. Lesson learned. The chain was dulled by the brief contact with the screws as I realized my mistake and definitely made the cut a lot more work than it needed to be. 6 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news In spite of my rookie mistakes, the cut came out really well, and removing the slabbing rail revealed a smooth surface in the spalted maple. Here in Florida the challenge is often how to get the wood not to spalt! Having removed the slabbing rail, the smooth freshly cut surface now provides a platform to register the next cut from. All subsequent cuts are now registered from the previous cut. I did realize to that I needed to adjust the height before the second cut as the depth had increased 7 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news due to the slabbing rail not being used. Here are some action shots of the second cut. The instructions had warned of a big grin after cutting your first slab. They were right! 8 / 9 Syzygy Woodworks by Keith Larrett http://www.syzygywoodworks.com/news All in all I'm really pleased with my purchase. I plan on using it to mill wood but for my woodturning, platters, bowl blanks, hollow form blanks and wall hangings, as well as my woodworking goal of making natural edge slab tables. I think it will work very well for what I intend to use it for. 9 / 9 Powered by TCPDF (www.tcpdf.org).
Load more

Recommended publications
  • Using Portable Sawmills to Produce High Value Timber from Farm Trees in the Semi-Arid Zone
    Using portable sawmills to produce high value timber from farm trees in the semi-arid zone A report for the RIRDC/ Land & Water Australia/FWPRDC/MDBC Joint Venture Agroforestry Program and the Natural Heritage Trust by P. Blackwell & M. Stewart October 2003 RIRDC Publication No 03/046 RIRDC Project No PN99.2001 © 2003 Rural Industries Research and Development Corporation. All rights reserved. ISBN 0642 58614 4 ISSN 1440-6845 Using portable sawmills to produce high value timber from farm trees in the semi-arid zone Publication No. 03/046 Project No. PN99.2001 The views expressed and the conclusions reached in this publication are those of the author and not necessarily those of persons consulted. RIRDC shall not be responsible in any way whatsoever to any person who relies in whole or in part on the contents of this report. This publication is copyright. However, RIRDC encourages wide dissemination of its research, providing the Corporation is clearly acknowledged. For any other enquiries concerning reproduction, contact the Publications Manager on phone 02 6272 3186. Researcher Contact Details Philip Blackwell Mark Stewart Forestry Campus Forestry Campus University of Melbourne University of Melbourne Creswick VIC 3363 Creswick VIC 3363 Phone: 0353214150 Phone: 0353214150 Fax:0353214135 Fax:0353214135 Email:[email protected] Email:[email protected] In submitting this report, the researchers have agreed to RIRDC publishing this material in its edited form. RIRDC Contact Details Rural Industries Research and Development Corporation Level 1, AMA House 42 Macquarie Street BARTON ACT 2600 PO Box 4776 KINGSTON ACT 2604 Phone: 02 6272 4539 Fax: 02 6272 5877 Email: [email protected] Website: http://www.rirdc.gov.au Published in October 2003 Printed on environmentally friendly paper by Canprint - ii - Foreword Australian farmers have generally embraced tree planting on their properties for environmental benefit for some time and these benefits are, more or less, well understood and accepted.
    [Show full text]
  • The Logosol M7 Chain Saw Mill the Chain Saw Is an Essential Tool for Every Logger Or Sawyer
    SAWMILL REVIEW The Logosol M7 Chain Saw Mill The chain saw is an essential tool for every logger or sawyer. While many people are quick to dismiss the idea of milling with a chain saw as too slow, too inaccurate, and taking too much kerf, many sawyers find unexpected uses for specialized cutting. For some, chain saw mills are a low-cost alternative to a band mill where high volume is not an issue. For others, they are a valuable addition to a band or circle sawmill, providing a way to cut odd sizes or shapes of logs that would normally be trimmed off or left in the woods. By David Boyt he Logosol M7 is some- pendently in 1/8 inch increments. Above: The M7 sawmill does an excel- thing of a hybrid mill. Al- While the frame accommodates logs lent job on odd sizes and shapes for spe- though it is powered by a up to 8 feet 3 inches long, multiple cialty cutting. Note the board clamped chain saw, it consists of a units can be combined to cut logs of to the knees to support the log. With a T little creativity, the mill will cut just rigid framework with a bed for the virtually any length. To emphasize about anything. log to rest on and a track for the this, Logosol lined up eight mills to chain saw. It has the advantages of cut a 114-foot-long 2 x 4, which was extreme portability (one person can entered in the Guinness World that are cut for development or dis- easily move it, and it fits easily on Records.
    [Show full text]
  • Report on Regional Workshop on Chainsaw Milling, Ghana
    “Developing alternatives for illegal chainsaw lumbering through multi-stakeholder dialogue in Ghana and Guyana” European Commission programme on Tropical Forests and other Forests in Developing Countries Report on Regional Workshop on Chainsaw Milling, Ghana By James Parker, Jane Aggrey & Mercy Owusu Ansah Tropenbos International Ghana P.O. Box UP 982 Kumasi, Ghana Tel. +2339(0)51 60310 July 2009 “The content of this publication is the sole responsibility of the author and can in no way be taken to reflect the views of the European Union” “The opinions expressed in this publication are those of the authors and do not necessarily reflect the views of Tropenbos International” CONTENTS PAGE LIST OF TABLESLIST OF PLATES ..................................................................................................... iv ACRONYMS ........................................................................................................................................... v ACKNOWLEDGEMENTS ...................................................................................................................... vi SUMMARY ............................................................................................................................................ vii 1.0 INTRODUCTION TO THE WORKSHOP ......................................................................................... 1 1.1 Background ................................................................................................................................... 1 1.2 Workshop
    [Show full text]
  • Fresh Cut No. 5
    www.logosol.com News for the Outdoor Craftsman • No. 5 - March 2007 The Winning Projects Meet Sweden’s most Famous Lumberman of the Logosol Contest! Tycho Loo, teacher in building log homes comes to the Out- The fi rst woodworking contest is complete, and the results are in. Read about all the door Craftsman School! exciting project - and meet the winner! Page 10, 11, 12 Page 4 Logosol Sawmill With its Own Railway Bo Malmborg in Sweden, has spent his entire adult life fulfi lling a dream. His private railway is 2.3 kilometers (1.4 miles) long. Bo uses it to carry logs from the forest to his Lo- gosol Sawmill. Page 14-15 MOULDING From Log to Harp With the Logosol Big Mill NETWORK Meet a Harp builder Dave Kortier recently added a chain saw and Logosol Big Mill to member! his shop in Minnesota. “This mill is the perfect tool”, he claims. new Page 8-9 Join the Logosol A chapter from Project Contest! our Best-Seller! Back page Hunting for good Knowledge Makes logs is just like going Good Mouldings! fi shing. Page 6 You always hope you will come Do You Love the home with a prize catch! Scent of Freshly Here are some tips on how to Report from the fi rst sawmill class! fi nd them.... Cut Wood? Page 3 Page 5 Page 5 To the Outdoor Craftsman What an exciting time since the last issue! Plenty of chang- es here at Bjorklund Ranch. I just installed my fi rst fl oor, made from six species of recycled urban hardwood logs; yellow & red eucalyptus, sycamore, live oak, black walnut, and acacia koa.
    [Show full text]
  • California Urban Woody Green Waste Utilization
    Urban Wood/0.0.& 1.0. Introduction/TP 5/19/99 CALIFORNIA URBAN WOODY GREEN WASTE UTILIZATION By 1 Tim R. Plumb 2 Marianne M. Wolf 3 John Shelly Urban Forests Ecosystems Institute California Polytechnic State University San Luis Obispo In Cooperation with California Department of Forestry and Fire Protection Riverside, CA May, 1999 Technical Report No. 8 ___________ 1Professor Emeritus, Natural Resources Management Dept., California Polytechnic State University, San Luis Obispo, CA. 2Associate Professor, Agribusiness Dept., California Polytechnic State University, San Luis Obispo, CA. 3Head of the Information Services Center and Research Associate, U. of California Forest Products Laboratory, Richmond, CA. Urban Wood/0.0.& 1.0. Introduction/TP 5/19/99 A C K N O W L E D G M E N T S Financial backing for this project was provided by an Urban Forestry Grant from the California Department of Forestry and Fire Protection with technical support from the Natural Resources Management Department, Urban Forest Ecosystems Institute, and Cal Poly Foundation, Cal Poly State University, San Luis Obispo, California. We especially thank the following individuals: Eric Oldar, Uban Forester, Calif. Dept. of For. & Fire Protection, Riverside, Calif. Will Senerchia, Past Mill Manager, Institute for Sustainable Forestry, Piercy, Calif. Tom Larsen, President, Integrated Urban Forestry, Inc. Laguna Hills, Calif. Craig Linquist, Service Line Mgr., Arbor Care, San Jose, Calif Guy Hall, Owner (Retired), Cal Oak Lumber Co., Oroville, Calif. Cindy McCall, Parks & Urban Forester, Lompoc, Calif. Martin Fitch, Parks Superintendent, Sacramento, Calif. Mill Owners George Hessenthaler, Urban Forest Woodworks, Inc. Logan, Utah Dave Faison (Deceased), Into the Woods, Peteluma, Calif.
    [Show full text]
  • Bailey's Logger Wear $17999 $19999
    baileysonline.com 1-800-322-4539 Industrial Division 1-888-465-8227 7 am through 5 pm PST Your Complete Choice for Work Gear, Logging, Urban Forest Management & Tree Care. ¡Operador en Español disponible: 1-888-322-1215! Sale Ends June 9, 2020 Bailey’s Logger Wear Wild Ass Short Sleeve Classic Hickory Shirt Jean Sale! As Low As SALE From $ 99 $ 99 25 Item No 28 HSC 92 Reg From Reg From $3399 $2999 See page 28 for Complete Wild Ass Clothing Specials! Item No HSC 94 See page 26 for more details! Designed by Professional Arborists Boot Sale! Light • Comfortable • Durable Red Dawg is Bailey’s Only exclusive custom line of $ 99 premium work boots. 199 SALE From Smart asymmetrical design $ 99 offers extended protection on 179 the left side of legs, where Meets Reg From most injuries occur. ASTM Std.F-1897-2014 and $ 99 199 CAN/BNQ 1923-450-M91. UL Certified. See page 27 for more details! Item No BWP AP Available Only at Bailey’s Husqvarna Chainsaws Farm & Ranch Husqvarna is our top selling brand of chainsaws, and many chainsaw users will not run anything else. Husqvarna farm and ranch chainsaws have many of the 50cc Chainsaw with same features as their professional "XP" chainsaw line, without the big price tag. 445 II E-Series 16” or 18” Bar & Chain If you are a first time user, this is a great line of chainsaws to start with. We offer The 445 II E-Series is a powerful all around saw with many professional each of these Husqvarna chainsaw models in a variety of options, including features.
    [Show full text]
  • Forest Master Universal Woodworking Station
    Forest Master Universal Woodworking Station Model: UWWS IMPORTANT: Read this manual fully before assembly and use and observe all safety rules and operating instruc- tions Thank you for purchasing the Forest Master Universal Woodworking Station. We hope you are 100% satisfied with your product but if you have any questions or queries, please don’t hesitate to contact us: Forest Master Ltd Tel: +44 (0)191 265 5000 Industry Road Email: [email protected] Heaton Website: www.forest-master.com Newcastle Upon Tyne NE6 5XB Your Product About Your Product The Forest Master Universal Woodworking Station is used for milling logs into all kinds of lumber. A chainsaw is mounted to the chainsaw frame that comprises of two C-shaped runners and an adjustable support bar. The runners slot onto the two guide rails of the chainsaw mill, allowing the chainsaw to glide freely along the horizontal plane, with no movement in the vertical plane, to give the smoothest and most accurate cut possible. The chainsaw mill can be used in a variety of ways outlined below: • Milling slabs of wood from a large log. • Milling multiple boards by clamping a number of slabs together, turning them onto the side and milling off the bark on both sides. • Creating fence posts in a quick and efficient way by drilling bolts into both ends of the log resting the bolts into the V shaped slots. This allows the log to be milled, unsecured, rotated 90° re secured and the milled again for all four sides. • Clamping a log in the vertical position to mill log coins.
    [Show full text]
  • From $90 to $6,000, There's a Machine for Anyone Who Has Ever Dreamed
    11154_Mini Sawmills-F 10/29/04 5:01 PM Page 70 Tool Review BackyardSawmills From $90 to $6,000, all love wood, whether it’s a wide clear board there’s a machine We or a gnarly slab with wild grain. That’s why saw- ing our own lumber crosses the minds of most wood- for anyone who has workers. It might be inspired by the sight of a big tree ever dreamed of blown down by a storm, a custom tabletop made from making lumber. only one or two slabs of unusual wood or the thought of free wood. Whatever reason, the idea of do-it-yourself by Randy Johnson lumber making holds a certain amount of intrigue for most of us. ART DIRECTION: DAVID SIMPSON • PHOTOGRAPHY: SHAWN NEILSEN, UNLESS NOTED SHAWN SIMPSON • PHOTOGRAPHY: DIRECTION: DAVID ART 70 American Woodworker JANUARY 2005 11154_Mini Sawmills-F 10/29/04 5:01 PM Page 71 American Woodworker JANUARY 2004 71 11154_Mini Sawmills-F 10/29/04 5:02 PM Page 72 ielding to my own curiosity about lumber making, I checked out nine sawmills ranging in size from very small Yto medium. The mills fall into two broad groups: handheld and frame-mounted. Now here’s a board to brag about! At 2-1/4 in. thick by 20 in. wide by 9 ft. long, this white oak board has exciting tabletop possibilities. T WO T YPES OF M ILLS HANDHELD FRAME-MOUNTED Most handheld mills fit Frame-mounted mills stand on the ground. They into the trunk of a car weigh from 85 to 1,900 lbs.
    [Show full text]
  • Download Our Master Catalog
    Your Complete Choice for Work Gear, Logging, Urban Forest Management & Tree Care Prices are subject to change without notice $2.00 Volume 43 baileysonline.com | Consumer: 800-322-4539 | Bailey’s Industrial: 1-888-465-8227 | [email protected] “Ain’t noth’n ever been got that ain’t been went out after.” Welcome... Jack Terwilliger, (1914-2005) Welcome to our 2018 Master Catalog! This catalog represents the most comprehensive printed media we have ever produced. I encourage you to Online Resources thumb through and shop with confidence that we are offering one of the best selections of forestry and tree Our industry-leading care work gear available today. Chainsaw Part Selector, Chainsaw Bar Selector, Bailey’s is a leading authority when it comes to chainsaws, bars, and chain. We began selling Chipper Knife Selector, chainsaws back in 1975, and we offer the most Mower Blade Selector, comprehensive selection of chainsaw guide bars and Chainsaw Chain Selector saw chain in the industry. Whether you are a and PartFINDER will weekend firewood cutter, a seasoned logger, or help you find the right anything in between, we have you covered. I product quickly and encourage you to try our online bar and chain easily. Be sure to look for selector guides to see all of the options we offer. these icons located on Bailey’s is also your one stop shopping source for the right side of our portable sawmilling and wood processing equipment. home page. We offer a wide range of entry level sawmills from Granberg and Logosol, as well as the world famous Lucas Mill swing blade sawmills and dedicated slabbers.
    [Show full text]
  • Fix It with a Peterson Sawmill
    t o o l s & t e c h Got Big? n i q u e s Fix It With a Peterson Sawmill By PAUL Easley I believe the very best thing about the American Tree Farm System is the sharing of knowledge. Every time Tree Farmers get together, you better believe lots of knowledge and enthusiastic ideas get shared. In fact, it’s hard to get some of them to shut up! Okay, I admit it, I fit those shoes! The same thing happens when you get around sawmill operators. In fact, I believe about everyone in the wood industry is willing to help one another. Through the years of building our was me who said, “I know you can and it is a fantastically beautiful mix. “stump-to-store” hardwood busi- do this!” There is everything from honey ness, we met a lot of nice folks who locust, quarter-sawn white oak, hick- helped us along, even if it was just And, so it began. The sharing of ideas ory and dozens of other spalted, with words like, “I know you can do led to a working model. After a few wormy and figured woods. They now this.” Then we started selling Kasco years of fixing up their old home with have a great hardwood business of sawmills and building a network of wood that Tammy cut with her mill, their own, Autumn Saw Mill. Guess small suppliers who helped to pro- they found a great country property duce product for our retail store. with a barn and good out buildings.
    [Show full text]
  • Chainsaw Mill
    instructables Chainsaw Mill by KentaNolin Many times a project calls for materials of specific There is an update in the mill post section. The post dimensions and quality that can't be obtained, clamps now have bolt pins to secure the mill to the financially or logistically. A chainsaw mill is a tool that bar. can be utilized to produce beams for timber framing or to cut slabs for wood working. Being mobile, it can There are details in the pictures so mouse over the be on site or right where the tree falls. This yellow image notes to get a clearer explanation. instructable shows how to construct a 20 in bar , variable height chainsaw mill. 1 1 1 1. Completed Chain saw mill (posts and guide bed) 1. Original plan for the mill, a few adjustments were made. 1. Completed Chain saw mill (posts and guide bed) Chainsaw Mill: Page 1 Step 1: Measure & Cut (This is for a 20 in bar) Accounting for the width of the Posts: square stock, the diameter of the largest tree that is (4) 8 in square stock able to be milled is 14.5 in. (2) 12 in pipe (1) 3 in wide by 8 in long sheet steel Materials: (4) 2 by .75 by .25 in bar stock (4) 4 in bolt, (4) nuts, (8) washers , (4) lock washers Guide bed: Chop saw (2) 9 in square stock Drill press and drill bits (2) 14.5 in square stock Ruler and wax pencil (1) 6.6 in square stock (1) 5 in pipe Safety: (1) 1.25 in square stock Goggles (1) 2.5 in square stock Gloves (2) .5 in nut and bolt Ear plugs Clothing to cover entire body (closed toe shoes) Note: Welding jacket Square stock is (1.25 by 1.25 in) Welding mask Pipe is (1 in) outer diameter Tools: MIG welder Vice grips Grinder 3 1 1 2 1.
    [Show full text]
  • On-Site Sawmilling and Timber Conversion
    ON-SITE SAWMILLING AND TIMBER CONVERSION INFORMATION PACK TRANSNATIONAL WOODLAND INDUSTRIES GROUP ON-SITE SAWMILLING AND TIMBER CONVERSION INFORMATION PACK Acknowledgements: For everyone who provided useful advice in developing this information pack, namely: Mike Furness, TWIG Project; David Jones, Forestry Commission; Andy Mason, Forestry Commission; John Morris, Chiltern Woodlands Project; Ulf-Dieter Pitzing, TWIG Project; Russell Rowley, SWA; Gervais Sawyer, Buckinghamshire Chiltern University College; Jim Walker, Chiltern Woodlands Project Loren Eldred, Chiltern Woodlands Project, September 2000. On-SiteOn-SiteSaSaOn-Site Sawmilling and TTTimberimberConConimber Convvvererersionsionsion Contents: 1. Introduction: i The aim of this sawmilling pack ii What is On-Site Conversion? iii Why Use On-Site Conversion? iv Adding Value v Profits 2. How you can utilise your wood 3. Forestry Machinery i Types of Mill ii Extraction Equipment iii Other Machinery 4. Practical Issues i Site Factors ii Milling iii Technical Aspects iv Legal Considerations v Health and Safety vi Provision of Information 5. The Economics i Costs of Different Operations ii Total Value 6. Case Study: Mobile Sawmilling Demonstration of 02.12.99 7. Glossary 8. Bibliography 9. Lists of Useful Contacts Plate 1. A mobile sawmill can add a new dimension to your woodland management L. Eldred, Chiltern Woodlands Project 1. Introduction i The aim of this sawmilling pack This pack is intended to illustrate to woodland owners how they can use a mobile sawmill to process their timber. It is not designed as a technical document but to provide an introduction to one important way of raising revenue from a wood. Owners can find out more about the process by contacting sawyers and woodland owners who have used mobile sawmills.
    [Show full text]