DOCSLIB.ORG

LOSS PREVENTION MANUAL Topic No. 500-000-015 State Safety Office

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
LOSS PREVENTION MANUAL Topic No. 500-000-015 State Safety Office LOSS PREVENTION MANUAL Topic No. 500-000-015 State Safety Office Tallahassee, Florida Effective November, 2010 LOSS PREVENTION MANUAL 500-000-015 TABLE OF CONTENTS INTRODUCTION: LOSS PREVENTION MANUAL PURPOSE Intro-1 AUTHORITY Intro-1 SCOPE Intro-1 REFERENCES Intro-1 GENERAL Intro-1 DISTRIBUTION Intro-2 QUESTIONS, SUGGESTIONS or COMMENTS Intro-2 REVISIONS AND ADDITIONS Intro-2 TRAINING Intro-2 FORMS Intro-3 CHAPTER 1: RESPONSIBLITIES 1.1 DEPARTMENT 1-1 1.2 DISTRICT SECRETARIES AND THE CENTRAL OFFICE 1-1 1.3 UNIT MANAGERS/OFFICE HEADS 1-1 1.4 IMMEDIATE SUPERVISORS 1-1 1.5 SAFETY AND HEALTH MANAGERS AND SPECIALISTS, OR DESIGNATED SAFETY REPRESENTATIVE 1-2 1.6 EMPLOYEES 1-2 1.7 STATE SAFETY OFFICE 1-3 1.8 HAZARD REPORTING SYSTEM “HOTLINE” 1-4 CHAPTER 2: TRAINING AND EDUCATION 2.1 TRAINING AND EDUCATION GOALS 2-1 2.2 SAFETY ORIENTATION 2-1 2.3 SAFETY INDOCTRINATION 2-1 2.4 TRAINING 2-2 2.5 FORMS 2-2 CHAPTER 3: INCIDENT REPORTING AND INVESTIGATION PROCESS 3.1 REPORTING OF INCIDENTS 3-1 3.2 REPORTING OF FATALITIES 3-1 3.3 INVESTIGATION OF ACCIDENTS 3-1 3.4 INFORMATION GATHERING 3-2 3.5 REVIEW OF INJURY/ILLNESS AND VEHICLE CRASH/INCIDENT OCCURRENCES 3-2 3.6 DRIVER RECORD CHECKS 3-3 CHAPTER 4: PERSONAL INJURY/ILLNESS REPORTING 4.1 RESPONSIBLITIES 4-1 4.2 FORM 4-2 CHAPTER 5: VEHICLE CRASH/INCIDENT REPORTING 5.1 PURPOSE 5-1 5.2 DEFINITIONS 5-1 5.3 VEHICLE CRASH 5-2 5.4 VEHICLE INCIDENT 5-4 5.5 VEHICLE CRASH/INCIDENT REPORT DISTRIBUTION 5-5 5.6 FORMS 5-5 CHAPTER 6: WORKPLACE SAFETY COMMITTEES 6.1 PURPOSE 6-1 6.2 GENERAL REQUIREMENTS 6-1 6.3 COMMITTEE FUNCTIONS 6-1 6.4 COMMITTEE STRUCTURE 6-2 CHAPTER 7: SAFETY AWARENESS 7.1 PURPOSE 7-1 7.2 OBJECTIVES 7-1 7.3 PROGRAM ACTIVITIES 7-1 CHAPTER 8: SAFETY INSPECTION 8.1 PURPOSE 8-1 8.2 SAFETY INSPECTION RESPONSIBLITIES 8-1 8.3 DANGER TAGS 8-2 8.4 UNAUTHORIZED REMOVAL OF TAGS 8-3 CHAPTER 9: FIRST AID/MEDICAL ASSISTANCE 9.1 PURPOSE 9-1 9.2 IN THE EVENT OF AN INJURY 9-1 CHAPTER 10: STANDARDS FOR SAFE WORK PRACTICES 10.1 PURPOSE 10-1 10.2 MANUAL MATERIALS HANDLING 10-1 10.3 PERSONAL PROTECTIVE EQUIPMENT AND LIFE SAVING EQUIPMENT 10-2 10.4 FIRE PREVENTION AND PROTECTION 10-8 10.5 ELECTRICAL SAFETY 10-12 10.6 LABORATORY SAFETY 10-13 (See Section 13.8 of this Manual) 10.8 CHAIN SAW OPERATIONS 10-13 10.9 WORK ZONE SAFETY 10-14 10.10 LADDERS 10-15 10.11 MOTOR VEHICLE AND EQUIPMENT OPERATIONS 10-17 10.12 FORKLIFT OPERATIONS 10-20 10.13 OFFICE HAZARDS AND SAFE WORK PRACTICES 10-21 10.14 INDOOR AIR QUALITY 10-23 CHAPTER 11: COMPLIANCE STANDARDS 11.1 PURPOSE 11-1 11.2 LABELS, SIGNS, AND FACILITY MARKINGS 11-1 11.3 COMPETENT PERSONS 11-8 11.4 OPERATIONAL REQUIREMENTS 11-9 CHAPTER 12: TRAINING REQUIREMENTS 12.1 PURPOSE 12-1 12.2 GENERAL REQUIREMENTS 12-1 12.3 TRAINING AND EDUCATION 12-1 12.4 SPECIAL TRAINING 12-5 CHAPTER 13: PROGRAMS 13.1 PURPOSE 13-1 13.2 CONFINED SPACE ENTRY 13-1 13.3 RESPIRATORY PROTECTION PROGRAM 13-3 13.4 HEARING CONSERVATION PROGRAM 13-5 13.5 MOTOR VEHICLE/HEAVY INDUSTRIAL EQUIPMENT OPERATION AUTHORIZATION 13-7 13.6 HAZARDOUS ENERGY CONTROL PROGRAM (LOCK-OUT/TAG-OUT) 13-9 13.7 BLOODBORNE PATHOGENS OCCUPATIONAL EXPOSURE CONTROL PLAN 13-13 13.8 LABORATORY SAFETY PROGRAM 13-26 13.9 HAZARD COMMUNICATION 13-39 13.10 INDOOR AIR QUALITY 13-42 Topic No. 500-000-015-i Effective: November 18, 2010 Loss Prevention Manual INTRODUCTION LOSS PREVENTION MANUAL PURPOSE: To establish a Department uniform loss prevention program designed to reduce and/or eliminate the number of work-related injuries to employees and damage to materials or property due to injuries, illness, vehicle crashes, and incidents. Also, to establish uniform operational plans and delineate responsibilities for maintaining a safe working environment for all employees of the Department. AUTHORITY: Sections 20.23(3)(a), Section 284.50, and 334.048(3), Florida Statutes (F.S.) SCOPE: This Loss Prevention Manual (Manual) applies to all employees and operations of the Department. REFERENCES: The Governor’s Executive Order, No. 2000-292, directed all State agencies in Florida to comply with Subparts C through T and Z of the Occupational Safety and Health (OSHA) Subparts, 29 CFR Part 1910, as revised July 1, 1993. The Department also requires employees to comply with the most current OSHA standards found in 29 CFR Parts 1926, and 1928.51. GENERAL: (1) The Department’s loss prevention program will be implemented through safety manuals and guidelines promulgated by the State Safety Office based upon the requirements set forth by the state and federal agencies having such authority and jurisdiction. (2) The Department’s facilities will be planned with the intent of providing each employee a place of employment free from recognized hazards. This commitment requires that safety be considered in all phases of operations. (3) The State Safety Office shall provide the leadership and technical assistance to develop implementation strategies and policies to promote safety awareness, hazard recognition and correction, and reporting within the Department. Loss Prevention Manual Intro-1 Topic No. 500-000-015-i Effective: November 18, 2010 Loss Prevention Manual (4) Supervisors shall be held accountable for maintaining a safe work environment and for ensuring that employees perform their work in a safe manner. (5) Employees are responsible for performing their work in a safe manner and for following established procedures and safe work practices. (6) Employees shall be provided initial indoctrination and the necessary training to enable them to perform their assigned tasks in a safe manner. (7) Employees will exercise their responsibility of reporting work place injuries, accidents, incidents, or hazardous conditions and not be subject to retaliation or penalty. DISTRIBUTION: The Manual is available at the following addresses: On the Internet at: http://www.dot.state.fl.us/safety/IndustrialSafety/indussafLossPrevProc.shtm On the Infonet at: http://infonet.dot.state.fl.us/tlofp/ The State Safety Office’s website at: http://www.dot.state.fl.us/safety/ QUESTIONS, SUGGESTIONS, or COMMENTS: Any questions, suggestions, or comments concerning the Manual should be addressed to the State Safety Office by calling (850) 414-3100 or visiting http://www.dot.state.fl.us/safety/11-IndustrialSafety/IndSafety-1.shtm REVISIONS AND ADDITIONS: All revisions will be coordinated with the Forms and Procedures Office in accordance with the Department’s Standard Operating System Procedure, No.025-020-002. TRAINING: Courses are available within the Department that will provide for the specific safety training required of employees. Training is prescribed in Chapter 12 of the Manual. Loss Prevention Manual Intro-2 Topic No. 500-000-015-i Effective: November 18, 2010 Loss Prevention Manual FORMS: Forms referenced in Chapters 3, 4, 5, 6 and 13 of the Manual are available from the Department’s Forms Library. Loss Prevention Manual Intro-3 Topic No. 500-000-015 Effective: November 18, 2010 Loss Prevention Manual Chapter 1 RESPONSIBILITIES 1.1 DEPARTMENT The Department shall furnish a work environment that is safe for its employees and shall adopt measures reasonable and necessary to protect the life, health, and safety of its employees. 1.2 DISTRICT SECRETARIES AND THE CENTRAL OFFICE Each District Secretary, or designee, and a representative from the Central Office shall establish a loss prevention program that includes, at a minimum, the program elements specified in this chapter. These individuals shall ensure that program and processes identified in this manual are implemented and a process is in place to assure each employee is in compliance. 1.3 UNIT MANAGERS/OFFICE HEADS 1.3.1 A Unit Manager/Office Head is an individual who exercises direction and control over one or more cost centers. 1.3.2 Each Unit Manager/Office Head is responsible for enforcing all safety rules and regulations and for implementing loss prevention programs. They are also responsible for ensuring their employees are provided with required safety training in accordance with Chapter 12 of this Manual. 1.3.3 Unit Managers/Office Heads responsible for promulgating procedures shall ensure that such procedures address safety-related issues and responsibilities in compliance with applicable federal, state, and other regulations and industry standards. 1.3.4 The Unit Manager/Office Head may designate and assign specific safety responsibilities to an employee in implementing the requirements of this manual. 1.4 IMMEDIATE SUPERVISORS 1.4.1 The immediate supervisor is an individual who exercises direction and control over the work activity of one or more employees. Loss Prevention Manual 1-1 Topic No. 500-000-015 Effective: November 18, 2010 Loss Prevention Manual 1.4.2 The immediate supervisor in charge of any work activity is responsible for ensuring that a safe work environment is maintained, safe work practices are followed, and employees are trained. No employee will be required to do a job using unsafe equipment or that violates safe work practices. 1.4.3 The immediate supervisor is responsible for notifying employees to be responsible for their own safety and the safety of their peers. They are also responsible for assessing and reducing work related risks. 1.5 SAFETY AND HEALTH MANAGERS AND SPECIALISTS, OR DESIGNATED SAFETY REPRESENTATIVE 1.5.1 Safety and Health Managers or Other Designated Representative The Safety and Health Managers or designees are the focal point for coordination of his/her District safety and health programs.
Load more

Recommended publications
  • Suspension Systems: a Review
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 04 Issue: 04 | Apr -2017 www.irjet.net p-ISSN: 2395-0072 Suspension Systems: A Review Dishant1, Er.Parminder Singh2, Er.Mohit Sharma3 1Student, Dept. Of Mechanical Engineering, DIET, Kharar, India 2Assitant Professor, Dept. Of Mechanical Engineering, DIET, Kharar India 3Assistant professor & Lecturer, Dept. of Mechanical Engineering, DIET, Kharar, India ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - Suspension systems don't tend to get much developed the "wire-wheel car". Like the Benz vehicle, this publicity, but they're probably the most crucial factor in the now also had a chassis which was completely divorced from day-to-day enjoyment of your car. Automakers are always the world of carriage building. There was also great progress tweaking and refining their designs in search of that elusive in the development of the engines which became ever more powerful, making the cars faster, but also heavier – a factor ideal: a perfect ride coupled with race-worthy handling. We which placed new demands on the suspension. The design haven't quite gotten there yet, but the latest systems are better engineers responded with increasingly sophisticated than ever at reconciling the competing goals of comfort and solutions. These included the gradual adoption of coil springs performance. Like most other components on a vehicle, – on the rear axle of the Daimler belt-driven car of 1895, for manufacturers have taken many different approaches when it example. However, it was not Gottlieb Daimler but Carl Benz comes to suspension design. Luxury cars are engineered for a who solved the problem of how to steer a comfortable ride, while sports cars need to corner at high speed.
    [Show full text]
  • Keystone RV Company 5/16/2016
    Keystone RV Company 5/16/2016 SAFETY ADVISORY # 16-252 Oregon Passport 3350BHWE Axles Keystone is conducting a voluntary RECALL notification campaign in accordance with the National Highway Transportation and Safety Act. It has been determined 3500 pound axles were installed instead of 4400 pound axles. An overload on the 3500 pound axles will lead to an increased risk of axle failure, property damage and/or vehicle crash. The following procedure describes how to correct the issue. Models Included: 2016 – 2017 Oregon Passport 3350BHWE Serial Number Range: 2016 - GX415002 – GX416491 2017 - HX410266 – HX410342 Parts Required per Unit: IMPORTANT – DO NOT PLACE AN ORDER FOR THESE PARTS Axle kit will be supplied after submission of Pre-Authorization request includes the following: 4 – KRV # 107894 - Tire - Center Cap - Excal - 6 Lug - Chrome - Open w/Insert - 4.25 2 – KRV # 427725 - Axle - 4400# - Straight - Overslung - 85/68.5 - LCI52-SB-85-68.5-NOSP-OS-L- 655-7278-30PT-GAWR-4400# 4 – KRV # 477117 - Tire - Trailer King II - ST225/75R15D - 2540# - PDW - 15" - 6-5.5 - Alum - Spk - Slv - T03 1 – KRV # 484273 - Tire - Trailer King II - ST225/75R15D - SRW - 15" x 6" - 6-5.5 - Mod – BW Purchase locally: Wire connectors Tools Required: -Impact Wrench - ½” drive (removal of wheels only) -Deep Socket 13/16”x ½” drive -Torque Wrench – ½” drive -Box end wrench 11/16” -Minimum 2” long socket extension, ½” drive -Wheel chocks -Floor Jack – adequate to trailer weight -Jack Stands -Wire cutters/crimpers GENERAL INFORMATION • Read the entire repair procedure prior to the repair. • Stock units must be remedied before selling. • This Safety Advisory requires Pre-Authorization.
    [Show full text]
  • 9630 Instructions
    FORM #9909.03-07132017 PRINTED IN U.S.A. PAGE 1 OF 14 Superlift 4” Lift System for 1998 – 2009 FORD RANGER 4WD with Torsion Bar Front Suspension INSTALLATION INSTRUCTIONS INTRODUCTION Installation requires a professional mechanic. Prior to beginning, inspect the vehicles steering, driveline, and brake systems, paying close attention to the track bar, suspension link arms and bushings, anti-sway bars and bushings, tie rod ends, pitman arm, ball joints and wheel bearings. Also check the steering sector-to-frame and all suspension-to-frame attaching points for stress cracks. The overall vehicle must be in excellent working condition; repair or replace all worn parts. Read instructions several times before starting. Be sure you have all needed parts and know where they install. Read each step completely as you go. NOTES: A special puller tool is required to load / unload the torsion bars. The tool is available separately from Superlift (#9635). A similar tool is available from Ford or the Kent Moore Tool Group in Roseville, MI (Phone: 800-576-7375, Fax: 800-345-2233). Both Ford and Kent Moore use part number T95T-5310-AR. If your vehicle is equipped with vacuum operated hubs: Ford states that several other special tools are needed; refer to Steps 4, 6, 16, 17, and 18. Most professional installers will have these tools or an equivalent. Ford suggests that these factory front axle components be replaced every time the front hub assembly is disassembled. Although we have found that if the parts are in good condition and carefully removed, they can be reused.
    [Show full text]
  • 2021STN CAT.Pdf
    PRODUCT CATALOG For over 32 years, Stinger® Chemical has proven to be one of the fastest-growing automotive chemical companies in the United States. The company specializes in manufacturing and supplying a complete line of automotive and aftermarket chemicals for the car care professional. Our highly trained staff is committed to being innovators in the industry, continually working to improve our products and services to ensure customer satisfaction. Working closely with our distributor network on the development process ensures that our products meet user expectations in performance, value, and quality. Most recently, Stinger® Chemical recognized the overwhelming demand for sanitation products and equipment caused by a global pandemic. The program provides an EPA and CDC approved product and is customizable to service any business or industry’s needs. Stingers® dedication to being a leading innovator in the chemical industry ensures customers will be satisfied with our products and services. MORE THAN 300 PRODUCTS READY FOR YOUR BUSINESS Our performance line of products is used Stingers®’ commitment to bringing The Stinger® Sanitation program adds in car washes, auto dealerships, detail innovative products to the marketplace that extra level of protection to reduce shops, and auto auctions across the begins in our Research & Development the risk of contamination. As businesses United States and internationally. Lab. It also serves as home to our Quality begin to reopen, owners must initiate new Analysis Testing, where all our products
    [Show full text]
  • 1/ Iiiimiaiii 4 É
    R. W. ASHLEY & F. OBEBKIRCH. WIRE WHEEL. APPLICATION FILED AUG-1.19M. Patented‘ Apr. 13, 1915. 3 SHEETS-SHEET 1. IIIImIAIIIé”. 1/4 A,‘h an.‘ EF 11...’? 00 “151% 1514200 on : I or“ ‘ R. W. ASHLEY 8; F. OBERKIRCH. WIRE WHEEL. - APPLICATION FILED AUG. 1, 1913 P a .% d A p PM 1 om, l 9 1 Rd. 3 s H. E E T 8 ..° H E E T am win/l Av - R. W. ASHLEY & F. OBERKIRCH. WIRE WHEEL. APPLICATION FILED AUG. 1, 1913. 1L 9 131%m Patented Apr. 13, 1915. 3 SHEET8~SHEET 3. WITNESSES .' - \ “FILQEERT W. ASHLEE? AND FRANK OZBERKIRCH, OF YORK, N. Y., ASSIGNOR-‘S TQ GENERAL IRXM COMPANY, A CORPORATION OF NEW’ YORK. ‘WIRE WHEEL. Speci?cation of Letters Patent. Patented Apr. 13}, i915. Application ?led August 1, 1913. Serial No. 782,336. To all whom it may] concern .' opposed in their diagonally inclined planes, Bed-t known that We, Roiirnr ll/hillsHLnY and the fourth or lesser acute series of and linens. 'OBERKIRCH, citizens of the spokes tulres cure of a substantial portiomoi United States, and residents of New York hearing, outward and inward transverse 5 city, in the county of New York and State thrust, us well usnssisting in all the other not New York, have ini'ented certain new and positions the first, second and third series useful improvements in Wire Wheels, oi’ of spokes. By setting" up a wheel of this which the following is a speci?cation. type under tension a satisfactory, reliable, The invention relates .to improvements in light ,aud durable suspension wheel is had, Wire wheels and has particular reference to the result being the reduction to form and 65 :1 wire .wheel of the type provided with a se; practice of a true and correct four point ries of interloced Wire spokes under tension, suspension Wheel.
    [Show full text]
  • Power Brush Catalog.Pdf
    POWER BRUSHES POWER BRUSHES CHOOSE QUALITY Superior construction, the highest quality materials, state of the art manufacturing, and exacting quality standards WHY WEILER deliver the most consistent brush performance. Each Weiler brush is designed to provide the best performance at the lowest cost-of-use. That's why we re-engineered our 4" stringer bead brush to deliver MAXimum impact, letting the wire do the work. Our beefed up Roughneck® Max brush delivers up to BONDED ABRASIVES twice the life. Combine that with the hardest, strongest wire and an improved knot design to MAXimize cleaning power and you have a brush that you can trust when your name is on the line. Technical Information .................................................... 48-56 Knot Wire Wheels ........................................................... 57-63 Weld Cleaning Brushes ................................................. 62-63 Crimped Wire Wheels .................................................... 64-71 COATED ABRASIVES Nylon & Tampico Wheels ...................................................72 Cup Brushes .................................................................... 73-75 Stem-Mounted End Brushes ......................................... 76-79 Crosshole Deburring Brushes ............................................80 Power & Hand Tube Brushes ....................................... 81-85 Crossflex Honing Brushes ............................................. 86-89 Miniature Brushes .......................................................... 90-91 Non-Sparking
    [Show full text]
  • Spring Fling Review • Wire Wheel Fix • Miata Seats
    T HE M AGAZINE O F T HE T O R O N to T RIU M PH C LUB S U mm ER 2 0 1 6 BBQ BASH Spring Fling Review • Wire Wheel Fix • Miata Seats ® contents “Keep’em On The Road” Summer 2016 Parts and Accessories for TR2, TR3, TR4, TR4A, TR250, TR6, TR7, TR8, GT6, Spitfire 15 26 30 19 Member Pages From the Editor......................5 From the President ..................7 Club Hub............................8 35 Owner’s Manual . 12 Features Events: Spring Fling ....................... 15 Victoria Weekend.................. 19 T HE M AGAZINE O F T HE T ORONTO T RIUMPH C LUB S UMMER 2 0 1 6 TRiumph Tales: BBQ Life as a Car Nut’s Wife ............. 26 BASH On the Cover Restoration: In my eight years as Ragtop‘s Generation Next – TR-6 on a budget .. 30 editor, I’ve resisted the temp- tation to flaunt Rosie on the Tech & Resto: " cover. But this is my last issue, so TR-250 Restoration ................ 35 K " e d e a I decided at the last minute to p o 'e R waive my self imposed restriction Bits and Pieces: m On The VictoriaBritish.com (800) 255-0088 and put Rosie in the spotlight as Wire Wheel Fix..................... 39 a tribute to her & the extra time I Mazda Seat Swap.................. 42 will now have to enjoy her! Spring Fling Review • Wire Wheel Fix • Miata Seats Photo by David Fidler Tail Lites.......................... 46 16 Ragtop 02 07.indd 1 16-07-28 2:37 PM ©2014 Long Motor Corp. RAGTOP I SUMMER I 2016 www.TorontoTriumph.com 3 Ragtop.indd 1 6/26/14 9:43 AM LANT INSURANCE BROKERS from the editor (A Division of Wayfarer Insurance Brokers Limited) SUBMISSIONS Format: MS Word files are preferred.
    [Show full text]
  • 4-Wheel Disc Brakes – Cheap and Easy By: Charles Goin
    4-WHEEL DISC BRAKES – CHEAP AND EASY BY: CHARLES GOIN The Following Tech Tip was brought into being after a laborious and intensive study on my part. It all started with the realization that the Isuzu Impulse (RWD) was a direct descendant of the Isuzu I-mark, which, of course, was a direct descendant of the Opel Kadet "C". Now most of this story I had already known. But, when I found out that the tooling for the Isuzu rear-end was also passed down and had been used in all of the small RWD Opels from the GT and Manta it grabbed my attention. Then I heard Roger Wilson at Roger's Opel Engineering had converted the entire rear end into a GT and had used the GTs center support and torque tube in the process. Though this had required a great deal of work on Roger's part, it at least had confirmed some of my suspicions about the compatibility of parts between them. After hearing about the work involved in doing the entire rear end, I thought except for a slightly higher ratio (3.91:1) the only good thing about the Impulses' rear was the disc brake set-up. So why not at least check and see how hard it would be to swap the rear discs onto a stock Opel rear end? After some under-the-car inspections at my local U-Pull-It I decided it seemed easy enough to do. This is where the story gets good. After going back and forth from the yard to get tools (which are a slide hammer, 8mm Allen wrench, 10mm & 14mm sockets, 8mm, 10mm & 14mm Crescent Wrenches, 10mm line wrench, socket wrench, screwdrivers and a good hammer) I finally removed the Impulse's brakes (it is easier and not much more expensive to buy from a regular junkyard).
    [Show full text]
  • Installation Instructions Part Number Labels Care/Cleaning Tires
    Installation Instructions Part Number 23333846 Note: Please read the following instructions carefully before mounting the wheels on the vehicle. Labels Your application may require a new tire inflation pressure and mass label. Be sure to use the correct replacement tire inflation label for the tire/wheel combinations. This label is provided as a guide for tire inflation pressures, and information for vehicle mass calculation. After installing the recommended TPC Spec (Tire Performance Criteria Specification) tires, please place the label on the vehicle. The new label should be located within the red box, over the top of the original tire label found on the door jam. To locate the label within the red box use the upper and left hand edge of redline as a guide. When properly placed the new tire label will obscure the original tire information, GM recommends that the surface that the label is to be applied to be cleaned with a suitable solvent (50% iso-propyl alcohol, FS 1062 hi-flash naptha or equivalent) and dried with a clean cloth. The surface temperature should not be less than 65°F (21°C). Peel the liner from the backside of the label being careful not to touch or contaminate the adhesive by allowing dirt or any foreign material to come in contact with it. Carefully align the label to the receiving surface, press firmly and smooth out. Care/Cleaning Use soap, hot water and a 100% cotton cloth to clean and polish your new wheels. If using a wheel cleaner, be sure to select one that will not harm the wheel surface.
    [Show full text]
  • Commodity Master List
    Commodity Master List 005 ABRASIVES 010 ACOUSTICAL TILE, INSULATING MATERIALS, AND SUPPLIES 015 ADDRESSING, COPYING, MIMEOGRAPH, AND SPIRIT DUPLICATING MACHINE SUPPLIES: CHEMICALS, INKS, PAPER, ETC. 019 AGRICULTURAL CROPS AND GRAINS INCLUDING FRUITS, MELONS, NUTS, AND VEGETABLES 020 AGRICULTURAL EQUIPMENT, IMPLEMENTS, AND ACCESSORIES (SEE CLASS 022 FOR PARTS) 022 AGRICULTURAL IMPLEMENT AND ACCESSORY PARTS 025 AIR COMPRESSORS AND ACCESSORIES 031 AIR CONDITIONING, HEATING, AND VENTILATING: EQUIPMENT, PARTS AND ACCESSORIES (SEE RELATED ITEMS IN CLASS 740) 035 AIRCRAFT AND AIRPORT, EQUIPMENT, PARTS, AND SUPPLIES 037 AMUSEMENT, DECORATIONS, ENTERTAINMENT, TOYS, ETC. 040 ANIMALS, BIRDS, MARINE LIFE, AND POULTRY, INCLUDING ACCESSORY ITEMS (LIVE) 045 APPLIANCES AND EQUIPMENT, HOUSEHOLD TYPE 050 ART EQUIPMENT AND SUPPLIES 052 ART OBJECTS 055 AUTOMOTIVE ACCESSORIES FOR AUTOMOBILES, BUSES, TRUCKS, ETC. 060 AUTOMOTIVE MAINTENANCE ITEMS AND REPAIR/REPLACEMENT PARTS 065 AUTOMOTIVE BODIES, ACCESSORIES, AND PARTS 070 AUTOMOTIVE VEHICLES AND RELATED TRANSPORTATION EQUIPMENT 075 AUTOMOTIVE SHOP EQUIPMENT AND SUPPLIES 080 BADGES, EMBLEMS, NAME TAGS AND PLATES, JEWELRY, ETC. 085 BAGS, BAGGING, TIES, AND EROSION CONTROL EQUIPMENT 090 BAKERY EQUIPMENT, COMMERCIAL 095 BARBER AND BEAUTY SHOP EQUIPMENT AND SUPPLIES 100 BARRELS, DRUMS, KEGS, AND CONTAINERS 105 BEARINGS (EXCEPT WHEEL BEARINGS AND SEALS -SEE CLASS 060) 110 BELTS AND BELTING: AUTOMOTIVE AND INDUSTRIAL 115 BIOCHEMICALS, RESEARCH 120 BOATS, MOTORS, AND MARINE AND WILDLIFE SUPPLIES 125 BOOKBINDING SUPPLIES
    [Show full text]
  • Wheels, Ancient and Modern-II.* from Log Roller to Wire-Spoke Motor Car Wheel
    DECEMBER 30, 1911 SCIENTIFIC AMERICAN SUPPLEMENT No. l878 427 the sun's heat, particles are detached from the nucleus, their density is negligible, 'as can be readily shDwn. thing over 1,000 kilometer s,* and the particles which and the comet fritters down, so to speak. When the The contrary might be sup'posed, in view of the light we are considering measure one-thousandth of a milli­ particles are detached, their very lightness exposes which they emit. Even if we admit the whole of this meter in diameter. If, therefore, we 'were to fill the them to the repulsion of the sun's light, and they light is reflected sunlight, and that no ·cathode phe­ volume of the moo·n with p ar ticles of this magnitude recede into space and are lost. The tail would soon nomena such as may occur in highly rarefied space, in such manner that the total density were one mil­ disappe,ar entirely if it were n ot continually regener­ enters into the -case, there really is no cause for lion million times less than that of the moon, the light ated anew. anxiety. which wou.ld be reflected would still have the same Under these circumstances :it is readily intelligible If we consider a given mass lighted up ·by the sun, brilHancy as that which we receive from t'he moon. If that a·n encounter with suoh a taB need oause us no the amount of light whic,h it reflects will be the we viewed ,this collection of particles at Ithe dis'banee anxiety.
    [Show full text]
  • Wire Wheels Top Quality Wire Wheel Conversion Kits Consists of 4 Wheels, 4 Adaptors, 4 Chrome Spinners & 16 Fixing Nuts
    • produCt promotion neWs 2011 • all priCes inClude vat at 20% • produCt promotion neWs 2011 • all priCes inClude vat at 20% • produCt promotion neWs 2011 • all priCes inClude vat at 20% • produCt promotion neWs 2011 • Top Gear 2011 TEL: 020 8995 6621 • FAX: 020 8742 1284 • E-MAIL: [email protected] • WWW.TRSHOP.CO.UK Wire Wheels top Quality Wire Wheel Conversion kits consists of 4 wheels, 4 adaptors, 4 chrome spinners & 16 fixing nuts. comes with a choice of either 2-eared or continental spinners set Wheel tr2-5 chrome tubeless £795.00 £155.00 tr2-5 painted tubeless £610.00 £108.00 tr4-6 5.5x15 72 Spoke chrome tubeless £915.00 £185.00 tr4-6 5.5x15 72 Spoke painted tubeless £715.00 £135.00 tr4-6 5.5x15 centre Laced 70 Spoke chrome tubeless £995.00 £205.00 tr4-6 5.5x15 centre Laced 70 Spoke painted tubeless £795.00 £155.00 tr6 6x15 centre Laced 70 Spoke tubeless chrome £995.00 £205.00 tr6 6x15 centre Laced 70 Spoke tubeless painted £795.00 £155.00 Spitfire/Gt6/Herald/Vitesse 4.5x13 60 Spoke chrome £750.00 £145.00 Spitfire/Gt6/Herald/Vitesse 4.5x13 60 Spoke painted £605.00 £108.00 Spitfire 5.5x13 centre Laced 60 Spoke tubeless chrome £830.00 £165.00 Stag 5.5x14 72 Spoke chrome £895.00 £180.00 Centre Laced wheels have all spokes going to Wire Wheel fittings delivery for a set of wire wheels centre of outer rim Wire Wheel Hub adaptor £30.00 united Kingdom £29.90 chrome 2-eared Spinner £17.00 France, Germany, Belgium, Holland £48.00 chrome continental Spinner £17.00 chrome 3-eared Spinner £42.00 Spinner Spanner £18.95 Hub kit £188.00 Wheel Spacer pair £17.00 4 x wire wheel hub adaptors, 4 x chrome copper & Hide Hammer £16.80 spinners, 16 x hub fixing nuts cleaning Brush £6.50 all our wire wheels are built under licence from Dunlop to BS5750/ iSO9000.
    [Show full text]