DOCSLIB.ORG

Monday, July 26

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Monday, July 26 USNCCM16 Technical Program (as of July 27, 2021) To find specific authors, use the search function in the pdf file. All times listed are in Central Daylight Saving Time. Monday, July 26 1 TS 1: MONDAY MORNING, JULY 26 10:00 AM 10:20 AM 10:40 AM 11:00 AM 11:20 AM Symposium Honoring J. Tinsley Oden's Monumental Contributions to Computational #M103 Mechanics, Chair(s): Romesh Batra Keynote presentation: On the Equivalence On the Coupling of Fiber-Reinforced Analysis and Between the Multiplicative Hyper-Elasto-Plasticity Classical and Non- Composites: Interface Application of and the Additive Hypo-Elasto-Plasticity Based on Local Models for Failures, Convergence Peridynamics to the Modified Kinetic Logarithmic Stress Rate Applications in Issues, and Sensitivity Fracture in Solids and Computational Analysis Granular Media Mechanics Jacob Fish*, Yang Jiao Serge Prudhomme*, Maryam Shakiba*, Prashant K Jha*, Patrick Diehl Reza Sepasdar Robert Lipton #M201 Imaging-Based Methods in Computational Medicine, Chair(s): Jessica Zhang Keynote presentation: Image-Based A PDE-Constrained Image-Based Polygonal Cardiac Motion Computational Modeling of Prostate Cancer Optimization Model for Lattices for Mechanical Estimation from Cine Growth to Assist Clinical Decision-Making the Material Transport Modeling of Biological Cardiac MR Images Control in Neurons Materials: 2D Based on Deformable Demonstrations Image Registration and Mesh Warping Guillermo Lorenzo*, Thomas J. R. Hughes, Angran Li*, Yongjie Di Liu, Chao Chen, Brian Wentz, Roshan Alessandro Reali, Hector Gomez, Thomas E. Jessica Zhang Teng Zhang* Upendra, Suzanne Yankeelov Shontz*, Cristian Linte Quantification and Modeling of Spatially Heterogeneous Phenomena in Biological #M202 Materials, Chair(s): Manuel Rausch, Emma Lejeune, Johannes Weickenmeier Keynote presentation: Mechanical Mechanics and Towards Application Estimation of Regional Consequences of Structural Heterogeneity in Microstructurally Based Driven Computational Structure-Function Healing Myocardial Scar Modeling of the Passive Models of Human Relationship in the Right Ventricular Induced Pluripotent Infarcted Left Ventricle Myocardium Stem Cell-Derived Cardiomyocytes Laura Caggiano, Jeffrey Holmes* Sotirios Kakaletsis*, Emma Lejeune*, Bill Emilio Mendiola*, Gabriella P. Sugerman, Zhao Hamed Babaei, Samer Tomasz Jazwiec, Merchant, Qian Xiang, Marcin Malinowski, Edward Hsu, Peter Tomasz Timek, Manuel Vanderslice, Reza Rausch Avazmohammadi Multiphysics and Data-Driven Modeling for Cardiovascular Biomedicine, Chair(s): #M206 Debanjan Mukherjee Keynote presentation: Continuum Modeling of Towards the Computational Model Clot Growth Modeling Thromboembolism: Embolization of Formed Clots Computational Design for Biochemical Considering Physical in a Sudden Expansion of Smart Nanocarriers Transport in Large Interactions Between Arterial Thrombus Flow and Blood Cell Neighborhood Components Nick Tobin, Keefe Manning* Annalisa Quaini*, Chayut Teeraratkul*, Jifu Tan*, Michael Hood Maxim Olshanskii, Debanjan Mukherjee Alexander Zhiliakov, Shereen Majd, Yifei Wang 2 TS 1: MONDAY MORNING, JULY 26 10:00 AM 10:20 AM 10:40 AM 11:00 AM 11:20 AM Advances and Applications of Mechanistic Machine Learning, Reduced-Order and Data- #M301 Driven Analyses, Chair(s): JS Chen, Dong Qian Keynote presentation: HiDeNN: An AI Platform Snapshots Construction Mechanistic Machine SimNet: A Neural for Scientific and Materials Systems Innovation Using In Situ Learning-Based Framework for Physics Visualization Tools for Multiscale Simulation of Simulations Data-Driven Reduced Short-Fiber-Reinforced Order Modeling Composites Wing Kam Liu* Gabriel Barros, Malu C. T. Wu, Haoyan Wei*, Oliver Hennigh, Grave, Jose Camata, Dandan Lyu, Wei Hu, Susheela Narasimhan, Alvaro Coutinho* Tung-Huan Su, Hitoshi Mohammad Amin Oura, Masato Nishi, Nabian*, Akshay Tadashi Naito, Leo Subramaniam, Shen, Kevin Zhang, Kaustubh Tangsali, Philip Ho, Zeliang Liu, Max Rietmann, Jose Tianyu Huang del Aguila Ferrandis, Wonmin Byeon, Zhiwei Fang, Sanjay Choudhry Physics-Based Data-Driven Modeling and Uncertainty Quantification in Computational #M306 Materials Science and Engineering, Chair(s): Johann Guilleminot Gaussian Process Bayesian Calibration of Point-Cloud Deep Stochastic Modeling An Adaptive-Sparse Regression Models for the Self- Learning of Fluid Flow and Identification of Spline Dimensional Constrained by Assembly of Diblock in Porous Media Material Properties on Decomposition Method Boundary Value Copolymers: 3D-Printed Structures, for High-Dimensional Problems Likelihood-Free with Application to Uncertainty Inference and Expected Orthopedic Implants Quantification Information Gain via Measure Transport Mamikon Gulian*, Ari Richardo Baptista, Ali Kashefi*, Tapan Shanshan Chu*, Steven Dixler*, Ramin Frankel, Laura Swiler Lianghao Cao*, Joshua Mukerji Johann Guilleminot Jahanbin, Sharif Chen, Omar Ghattas, Rahman Fengyi Li, Youssef Marzouk, J. Tinsley Oden Data-Enhanced Modeling and Uncertainty Quantification of Systems with Multiple #M307 Fidelities, Chair(s): Alex Gorodetsky Multifidelity UQ Multilevel Best Linear Adaptive Basis for Enhancing Multifidelity MXMC: Generalized Sampling for Stochastic Unbiased Estimators for Multifidelity Uncertainty UQ with Model Tuning Multi-Model Monte Simulations Uncertainty Quantification Carlo Simulation for Quantification Uncertainty Propagation Gianluca Geraci*, Laura Daniel Schaden, Xiaoshu Zeng*, Michael Eldred*, Geoffrey Bomarito*, Swiler, Bert Elisabeth Ullmann* Gianluca Geraci, Gianluca Geraci, Alex James Warner, Patrick Debusschere Michael Eldred, John Gorodetsky, John Leser, William Leser, Jakeman, Alex Jakeman Luke Morrill Gorodetsky, Roger Ghanem 3 TS 1: MONDAY MORNING, JULY 26 10:00 AM 10:20 AM 10:40 AM 11:00 AM 11:20 AM Physics-Informed Learning and Data-Enabled Predictive Modeling and Discovery of #M308 Complex Systems, Chair(s): Danial Faghihi, Jianxun Wang Keynote presentation: Low-Dimensional Bayesian Inference of a A Bayesian Framework Image-Based Bayesian Structure in Bayesian Inference Problems with Multiscale Model of for Validation and Inference and Patient Mixture Models Tumor Angiogenesis Selection of Multiscale Specific Prediction of via Live Cell Imaging, Plasticity Models with Heterogeneous Tumor Protein Expression Quantified Uncertainty Growth Data, and a 3D Microfluidic Platform Ricardo Baptista*, Jayanth Jagalur Mohan, Caleb Phillips*, Manasa Jingye Tan*, Kathryn Baoshan Liang*, Jingye Youssef Marzouk Gadde, Ernesto Lima, Maupin, Danial Faghihi Tan, Luke Lozensk, Angela Jarrett, M. David Hormuth, Nichole Rylander, Thomas Yankeelov, Thomas Yankeelov Umberto Villa, Danial Faghihi Data-Driven Science with Uncertainty Quantification, Machine Learning, and #M309 Optimization, Chair(s): Roger Ghanem, Christophe Desceliers Keynote presentation: A Statistical Finite A Probabilistic Artificial Physics Aware Machine Element Method (statFEM) for Coherent Synthesis Neural Network for a Learning for Structural of Observation Data and Model Predictions Robust Identification of Topology Optimization the Random Apparent Elasticity Tensor Field at Mesoscale Fehmi Cirak*, Eky Febrianto, Mark Girolami Christophe Desceliers*, Jaydeep Rade*, Ethan Florent Pled Herron, Aditya Balu, Soumik Sarkar, Adarsh Krishnamurthy #M311 Model Order Reduction for Physical Simulations, Chair(s): Matthew Zahr Reduced Order Large Eddy Simulation Entropy Stable Hyperreduction for Methods for Reduced Order Models Reduced Order Discontinuous Galerkin Computational Fluid Modeling of Nonlinear Methods: Element- and Dynamics: State of the Conservation Laws Point-Wise Reduced Art, Perspectives and Quadrature Applications Formulations with Applications to Aerodynamics Gianluigi Rozza* Traian Iliescu*, Jesse Chan* Masayuki Yano* Changhong Mou, Birgul Koc #M314 Data-Driven Modeling in Mechanics, Chair(s): Francisco Chinesta Keynote presentation: A Mechanics-Informed, Material Hybrid Unsupervised Learning Constitutive Data-Driven Approach to Material Modeling and Descriptions Combining Discovery of Models with a Non- Application to Multiscale Problems Physics Based and Interpretable Intrusive Reduced Data-Driven Models Hyperelastic Basis Method Constitutive Laws Faisal As'ad*, Philip Avery, Charbel Farhat Francisco Chinesta*, Siddhant Kumar*, Theron Guo*, Karen Elias Cueto, Victor Moritz Flaschel, Laura Veroy Champaney, Jean De Lorenzis Louis Duval 4 TS 1: MONDAY MORNING, JULY 26 10:00 AM 10:20 AM 10:40 AM 11:00 AM 11:20 AM #M401 Peridynamics and Its Applications, Chair(s): Erdogan Madenci Implementation of the The Crushing and A Rate-Dependent A Space-Time Peridynamic Analysis of Drucker-Prager Model Cutting Effects of Drill Peridynamic Discretization of a Crushing Behavior in for Ordinary State- Bit Cutter on Deep Well Optimization Model for Nonlinear Peridynamic Ceramic Open Cell Based Peridynamics Rock Based on Dynamic Mechanical Model on a 2D Lamina Foams Using a Local Plastic Peridynamics Behavior of Ceramic Multiplier Materials Taiki Shimbo*, Tomoki Jingkai Chen*, Yaxun Liu*, Lisheng Luciano Lopez, Sabrina Vinzenz Guski*, Kim Kawamura, Yutaka Zhangcong Huang, Liu, Qiwen Liu, Hai Mei Francesca Pellegrino* Lars Haeussler, Anne Fukumoto Hualin Liao, Yanting Uhlenbrock, Siegfried Zhang Schmauder #M402 Computational Geomechanics, Chair(s): Qiushi Chen Double-Phase-Field Dynamic Fracture Numerical Modeling of A Nonlocal Fracture Modeling of Mixed- Simulation of Rock Phase Transformation Model for Cohesive- Mode Fracture in Rocks Using a Rate- Induced Material
Load more

Recommended publications
  • Frictional Peeling and Adhesive Shells Suomi Ponce Heredia
    Adhesion of thin structures : frictional peeling and adhesive shells Suomi Ponce Heredia To cite this version: Suomi Ponce Heredia. Adhesion of thin structures : frictional peeling and adhesive shells. Physics [physics]. Université Pierre et Marie Curie - Paris VI, 2015. English. NNT : 2015PA066550. tel- 01327267 HAL Id: tel-01327267 https://tel.archives-ouvertes.fr/tel-01327267 Submitted on 6 Jun 2016 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. THÈSE DE DOCTORAT DE L’UNIVERSITÉ PIERRE ET MARIE CURIE Spécialité : Physique École doctorale : «Physique en Île-de-France » réalisée Au Laboratoire de Physique et Mécanique des Milieux Hétérogènes présentée par Suomi PONCE HEREDIA pour obtenir le grade de : DOCTEUR DE L’UNIVERSITÉ PIERRE ET MARIE CURIE Sujet de la thèse : Adhesion of thin structures Frictional peeling and adhesive shells soutenue le 30 Novembre, 2015 devant le jury composé de : M. Etienne Barthel Examinateur M. José Bico Directeur de thèse M. Axel Buguin Examinateur Mme. Liliane Léger Rapporteure M. Benoît Roman Invité M. Loïc Vanel Rapporteur 1 Suomi PONCE HEREDIA 30 Novembre, 2015 Sujet : Adhesion of thin structures Frictional peeling and adhesive shells Résumé : Dans cette thèse, nous nous intéressons à l’adhésion d’élastomères sur des substrats rigides (interactions de van der Waals).
    [Show full text]
  • Rheology of Frictional Grains
    Rheology of frictional grains Dissertation zur Erlangung des mathematisch-naturwissenschaftlichen Doktorgrades “Doctor rerum naturalium” der Georg-August-Universität Göttingen im Promotionsprogramm ProPhys der Georg-August University School of Science (GAUSS) vorgelegt von Matthias Grob aus Mühlhausen Göttingen, 2016 Betreuungsausschuss: • Prof. Dr. Annette Zippelius, Institut für Theoretische Physik, Georg-August-Universität Göttingen • Dr. Claus Heussinger, Institut für Theoretische Physik, Georg-August-Universität Göttingen Mitglieder der Prüfungskommission: • Referentin: Prof. Dr. Annette Zippelius, Institut für Theoretische Physik, Georg-August-Universität Göttingen • Korreferent: Prof. Dr. Reiner Kree, Institut für Theoretische Physik, Georg-August-Universität Göttingen Weitere Mitglieder der Prüfungskommission: • PD Dr. Timo Aspelmeier, Institut für Mathematische Stochastik, Georg-August-Universität Göttingen • Prof. Dr. Stephan Herminghaus, Dynamik Komplexer Fluide, Max-Planck-Institut für Dynamik und Selbstorganisation • Dr. Claus Heussinger, Institut für Theoretische Physik, Georg-August-Universität Göttingen • Prof. Cynthia A. Volkert, PhD, Institut für Materialphysik, Georg-August-Universität Göttingen Tag der mündlichen Prüfung: 09.08.2016 Zusammenfassung Diese Arbeit behandelt die Beschreibung des Fließens und des Blockierens von granularer Materie. Granulare Materie kann einen Verfestigungsübergang durch- laufen. Dieser wird Jamming genannt und ist maßgeblich durch vorliegende Spannungen sowie die Packungsdichte der Körner,
    [Show full text]
  • Lecture 1: Introduction
    Lecture 1: Introduction E. J. Hinch Non-Newtonian fluids occur commonly in our world. These fluids, such as toothpaste, saliva, oils, mud and lava, exhibit a number of behaviors that are different from Newtonian fluids and have a number of additional material properties. In general, these differences arise because the fluid has a microstructure that influences the flow. In section 2, we will present a collection of some of the interesting phenomena arising from flow nonlinearities, the inhibition of stretching, elastic effects and normal stresses. In section 3 we will discuss a variety of devices for measuring material properties, a process known as rheometry. 1 Fluid Mechanical Preliminaries The equations of motion for an incompressible fluid of unit density are (for details and derivation see any text on fluid mechanics, e.g. [1]) @u + (u · r) u = r · S + F (1) @t r · u = 0 (2) where u is the velocity, S is the total stress tensor and F are the body forces. It is customary to divide the total stress into an isotropic part and a deviatoric part as in S = −pI + σ (3) where tr σ = 0. These equations are closed only if we can relate the deviatoric stress to the velocity field (the pressure field satisfies the incompressibility condition). It is common to look for local models where the stress depends only on the local gradients of the flow: σ = σ (E) where E is the rate of strain tensor 1 E = ru + ruT ; (4) 2 the symmetric part of the the velocity gradient tensor. The trace-free requirement on σ and the physical requirement of symmetry σ = σT means that there are only 5 independent components of the deviatoric stress: 3 shear stresses (the off-diagonal elements) and 2 normal stress differences (the diagonal elements constrained to sum to 0).
    [Show full text]
  • Rheometry SLIT RHEOMETER
    Rheometry SLIT RHEOMETER Figure 1: The Slit Rheometer. L > W h. ∆P Shear Stress σ(y) = y (8-30) L −∆P h Wall Shear Stress σ = −σ(y = h/2) = (8-31) w L 2 NEWTONIAN CASE 6Q Wall Shear Rateγ ˙ = −γ˙ (y = h/2) = (8-32) w h2w σ −∆P h3w Viscosity η = w = (8-33) γ˙ w L 12Q 1 Rheometry SLIT RHEOMETER NON-NEWTONIAN CASE Correction for the real wall shear rate is analogous to the Rabinowitch correction. 6Q 2 + β Wall Shear Rateγ ˙ = (8-34a) w h2w 3 d [log(6Q/h2w)] β = (8-34b) d [log(σw)] σ −∆P h3w Apparent Viscosity η = w = γ˙ w L 4Q(2 + β) NORMAL STRESS DIFFERENCE The normal stress difference N1 can be determined from the exit pressure Pe. dPe N1(γ ˙ w) = Pe + σw (8-45) dσw d(log Pe) N1(γ ˙ w) = Pe 1 + (8-46) d(log σw) These relations were calculated assuming straight parallel streamlines right up to the exit of the die. This assumption is not found to be valid in either experiment or computer simulation. 2 Rheometry SLIT RHEOMETER NORMAL STRESS DIFFERENCE dPe N1(γ ˙ w) = Pe + σw (8-45) dσw d(log Pe) N1(γ ˙ w) = Pe 1 + (8-46) d(log σw) Figure 2: Determination of the Exit Pressure. 3 Rheometry SLIT RHEOMETER NORMAL STRESS DIFFERENCE Figure 3: Comparison of First Normal Stress Difference Values for LDPE from Slit Rheometer Exit Pressure (filled symbols) and Cone&Plate (open symbols). The poor agreement indicates that the more work is needed in order to use exit pressures to measure normal stress differences.
    [Show full text]
  • Vibrating-Wire Rheometry
    Western University Scholarship@Western Electronic Thesis and Dissertation Repository 8-20-2018 2:30 PM Vibrating-wire Rheometry Cameron C. Hopkins The University of Western Ontario Supervisor de Bruyn, John R. The University of Western Ontario Graduate Program in Physics A thesis submitted in partial fulfillment of the equirr ements for the degree in Doctor of Philosophy © Cameron C. Hopkins 2018 Follow this and additional works at: https://ir.lib.uwo.ca/etd Part of the Statistical, Nonlinear, and Soft Matter Physics Commons Recommended Citation Hopkins, Cameron C., "Vibrating-wire Rheometry" (2018). Electronic Thesis and Dissertation Repository. 5584. https://ir.lib.uwo.ca/etd/5584 This Dissertation/Thesis is brought to you for free and open access by Scholarship@Western. It has been accepted for inclusion in Electronic Thesis and Dissertation Repository by an authorized administrator of Scholarship@Western. For more information, please contact [email protected]. Abstract This thesis consists of two projects on the behaviour of a novel vibrating-wire rheometer and a third project studying the gelation dynamics of aqueous solutions of Pluronic F127. In the first study, we use COMSOL to perform two-dimensional simulations of the oscillations of a wire in Newtonian and shear-thinning fluids. Our results show that the resonant behaviour of the wire agrees well with the theory of a wire vibrating in Newtonian fluids. In shear-thinning fluids, we find resonant behaviour similar to that in Newtonian fluids. In addition, we find that the shear-rate and viscosity in the fluid vary significantly in both space and time. We find that the resonant behaviour of the wire can be well described by the theory of a wire vibrating in a Newtonian fluid if the viscosity in the theory is set equal to the viscosity averaged over the cir- cumference of the wire and over one period of the wire’s oscillation at the resonant frequency.
    [Show full text]
  • One-Dimensional Differential Newtonian Analysis for Applications in Saliva Rheology
    One-dimensional Differential Newtonian Analysis for Applications in Saliva Rheology by Louise Lu McCarroll A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Mechanical Engineering) in The University of Michigan 2017 Doctoral Committee: Professor William W Schultz, Co-Chair Professor Michael J Solomon, Co-Chair Professor Joseph Bull Dr. Joseph T Murray, Veterans Affairs Hospital Professor Alan S Wineman Louise Lu McCarroll [email protected] ORCID iD: 0000-0003-1471-0655 © Louise Lu McCarroll 2017 For my parents, Yin and Lin Lin ii ACKNOWLEDGEMENTS I think the best phrase that describes this experience for me is \it takes a village" or in my case it should be \it takes a whole metropolitan area and then some." But I'll stick with the \village" analogy for now. The chief villagers I'd like to thank are my advisors, Professor William Schultz and Professor Michael Solomon, for their seemingly unlimited supply of patience with me, especially when I was feeling like the village idiot. Thank you for your guidance these past few years, for teaching me to be resourceful, to a construct logical argument and perform novel analyses, for propping me up when my spirits were low, and last but not least, for being so approachable. I have really enjoyed working on this project with you both. Bill - I am still trying to learn how to \embrace chaos." Mike - I appreciate all the structure you have imposed on this process. I'd also like to extend my gratitude to my committee members, Professor Alan Wineman, Professor Joseph Bull, and Dr.
    [Show full text]
  • Rheometry FLOW in CAPILLARIES, SLITS and DIES DRIVEN by PRESSURE (POISEUILLE DEVICES) CAPILLARY RHEOMETER
    Rheometry FLOW IN CAPILLARIES, SLITS AND DIES DRIVEN BY PRESSURE (POISEUILLE DEVICES) CAPILLARY RHEOMETER Figure 1: The Capillary Rheometer. Advantages: (1) Can operate at high shear rates (2) May be closer to real processing situation than a rotational rheometer Disadvantages: (1) Shear rate is not uniform (2) Wall slip (3) Melt fracture (4) Difficult to clean 1 Rheometry CAPILLARY RHEOMETER NEWTONIAN CASE The velocity profile from the Navier-Stokes Equations is: 2Q r 2 v(r) = 1 − (8-9) πR2 R dv Shear Rateγ ˙ = (8-6) dr −4Qr γ˙ (r) = πR4 r γ˙ (r) = γ˙ (R) (8-8) R Wall Shear Rateγ ˙ w ≡ −γ˙ (R) (8-11) 4Q γ˙ = (8-12) w πR3 The shear stress from the Navier-Stokes Equations is: r dP σ(r) = − (8-2) 2 dz R dP σ(R) = − (8-3) 2 dz r σ(r) = σ(R) (8-4) R R dP Wall Shear Stress σ ≡ σ(R) = − (8-5) w 2 dz σ σ (−dP/dz)πR4 Viscosity η = = w = (8-14) γ˙ γ˙ w 8Q 2 Rheometry CAPILLARY RHEOMETER NON-NEWTONIAN CASE 4 σw (−dP/dz)πR Apparent Viscosity ηA = = (8-15) γ˙ A 8Q Since the shear rate varies across the radius of the capillary, a non- Newtonian fluid will have an effective viscosity that depends on radial posi- tion. Figure 2: Dependence of Real Shear Stress σ, Apparent Shear Rateγ ˙ a, and Real Shear Rateγ ˙ on Radial Position for a Non-Newtonian Fluid Flowing in a Capillary. 3 Rheometry CAPILLARY RHEOMETER NON-NEWTONIAN CASE THE RABINOWITCH CORRECTION There is a unique relation between the wall shear stress and the apparent wall shear rate.
    [Show full text]
  • Yield Stress Fluid Flows: a Review of Experimental Data P. Coussot Laboratoire Navier, Univ
    Yield stress fluid flows: a review of experimental data P. Coussot Laboratoire Navier, Univ. Paris-Est, Champs-sur-Marne, France Abstract: Yield stress fluids are encountered in a wide range of applications: toothpastes, cement, mortar, foams, muds, mayonnaise, etc. The fundamental character of these fluids is that they are able to flow (i.e. deform indefinitely) only if they are submitted to a stress larger than a critical value, otherwise they deform in a finite way like solids. The flow characteristics of such materials are difficult to predict as they involve permanent or transient solid and liquid regions whose location cannot generally be determined a priori. Here we review the existing knowledge as it appears from experimental data, concerning flows of simple (non-thixotropic) yield stress fluids under various conditions mainly: (i) uniform flows in straight channels or rheometrical geometries, (ii) complex stationary flows in channels of varying cross-section such as extrusion, expansion, flow through porous medium, (iii) transient flows such as flows around obstacles, spreading, spin-coating, squeeze flow, elongation. The effects of surface tension, confinement, and secondary flows are also reviewed. A special emphasis will be laid on the experimental works providing information on the internal flow characteristics which give critical elements for a comparison with numerical predictions. It is in particular shown that (i) the deformations in the solid regime can play a critical role in transient flows; (ii) the yielding character does not play a significant role on the flow field when the boundary conditions impose large deformations; (iii) in secondary flows the yielding character is lost.
    [Show full text]
  • Vorticity Alignment and Negative Normal Stresses in Sheared Attractive Emulsions
    PHYSICAL REVIEW LETTERS week ending VOLUME 92, NUMBER 5 6 FEBRUARY 2004 Vorticity Alignment and Negative Normal Stresses in Sheared Attractive Emulsions Alberto Montesi, Alejandro A. Pen˜a,* and Matteo Pasquali† Department of Chemical Engineering, Rice University, 6100 Main Street, Houston, Texas 77005, USA (Received 13 June 2003; published 6 February 2004) Attractive emulsions near the colloidal glass transition are investigated by rheometry and optical microscopy under shear. We find that (i) the apparent viscosity drops with increasing shear rate, then remains approximately constant in a range of shear rates, then continues to decay; (ii) the first normal stress difference N1 transitions sharply from nearly zero to negative in the region of constant shear viscosity; and (iii) correspondingly, cylindrical flocs form, align along the vorticity, and undergo a log- rolling movement. An analysis of the interplay between steric constraints, attractive forces, and composition explains this behavior, which seems universal to several other complex systems. DOI: 10.1103/PhysRevLett.92.058303 PACS numbers: 83.80.Iz, 83.50.Ax, 47.55.Dz Emulsions are relatively stable dispersions of drops of a Rheological measurements were carried out in a liquid into another liquid in which the former is partially strain-controlled rheometer using several geometries [1]. or totally immiscible. Stability is conferred by other Microscopic observations were performed using a cus- components, usually surfactants or finely divided solids, tomized rheo-optical cell consisting of two parallel which adsorb at the liquid-liquid interface and retard glass surfaces, with the upper one fixed to the micro- coalescence and other destabilizing mechanisms. scope (Nikon Eclipse E600) and the lower one set on a Emulsions can be regarded as repulsive or attractive, computer-controlled xyz translation stage (Prior Proscan depending on the prevailing interaction forces between H101).
    [Show full text]
  • II: Measurements: Rheometry Measures Deformation /Stress on a Material with Unknown Constitutive Behavior
    rheometry Rheometry: the science of rheological measurements What is a rheometer? An instrument that creates a flow and enforces stress / deformation and II: measurements: rheometry measures deformation /stress on a material with unknown constitutive behavior - shear versus extension - small strain versus large strain - transient versus steady rheometry rheometry Homogeneous nonhomogeneous, indexers (complex flow fields) material functions and classification of rheometers Introduction Drag flow: shear flow generated by a moving and a fixed solid surface Pressure driven flow: shear generated by a presure 5: shear rheometry: drag flows difference over a closed channel (versus pressure driven flows) Measure the: - relaxation modulus - transient shear viscosity - steady shear viscosity - first normal stress difference coefficient - second normal stress difference coefficient Drag flow: sliding plates Working equations Shear flow geometries Critical time for homogeneous simple shear flow Drag flow: concentric cylinders (Couette flow) Drag flow: concentric cylinders (Couette flow) Assumptions: Shear stress: - Steady, laminair, isothermal flow - vθ = r Ω only and vr = vz = 0 - Negligible gravity and end effects - Symmetry in θ, ∂/∂θ = 0 Torque measured at the inner cylinder Equations of motion, cyl. coordinates → Outer cylinder Boundary conditions → Drag flow: concentric cylinders (Couette flow) Drag flow: concentric cylinders (Couette flow) Strain and strain rate Change of variable: Dropping subscripts: Very narrow gap (Ri/Ro>0.99): Integrating (rotating inner cyl.): Ri/Ro<0.99, cylinder coord.: Differentiating with respect to stress: Shear rate varies across the gap With: It follows: Drag flow: concentric cylinders (Couette flow) For 0.5 < κ < 1.0 expand: In Mclaurin series: Where n, the power law index, in terms of torque and rotation rate : For κ > 0.5, n = const.
    [Show full text]
  • Capillary Rheometry: Analysis of Low-Viscosity Fluids, and Viscous Liquids and Melts at High Shear Rates
    Reprinted from American Laboratory October 2009 Technical Article by Tien T. Dao, Allan X. Ye, Ali A. Shaito, Nick Roye, and Kaj Hedman Capillary Rheometry: Analysis of Low-Viscosity Fluids, and Viscous Liquids and Melts at High Shear Rates heology is defined as the study of the vertical capillary die when no instrument The basic components of a capillary rhe- flow and deformation of fluids. Based driving force is applied, and 2) low-pressure ometer consist of a barrel, ram (piston), Ron the need to quickly and accurately readings from the transducer during the capillary die fitted inside the barrel, pres- set and control processing conditions, opti- measurement. Many times the measured sure gauge, and force transducer (Figure mize product performance, and/or ensure pressure signal can reach the low-end limit 1). The material is located within the bar- product acceptance, accurate rheological of the pressure transducer used. rel, and then the ram (or piston) attached measurements have become essential in the with a force transducer pushes the material characterization of any flowable materials. Another concern is the required length- through the capillary die at a specified rate. By utilizing rheological measurements on to-diameter ratio (L/D) of the die for the Above the die inside the barrel is a pres- new materials, process conditions can easily measurement to be rigorous. According to sure transducer, which allows for the mea- be determined, and the final product prop- Macosko,3 an L/D of 60 or higher is required surement of the gauge pressure ΔP within erties and performance can be predicted.
    [Show full text]
  • Strain Shifts Under Stress-Controlled Oscillatory Shearing in Theoretical
    Strain shifts under stress-controlled oscillatory shearing in theoretical, experimental, and structural perspectives: Application to probing zero-shear viscosity Johnny Ching-Wei Lee, Yu-Tong Hong, Katie M. Weigandt, Elizabeth G. Kelley, Hyunjoon Kong, and Simon A. Rogers Citation: Journal of Rheology 63, 863 (2019); doi: 10.1122/1.5111358 View online: https://doi.org/10.1122/1.5111358 View Table of Contents: https://sor.scitation.org/toc/jor/63/6 Published by the The Society of Rheology ARTICLES YOU MAY BE INTERESTED IN Rheology of crystallizing polymers: The role of spherulitic superstructures, gap height, and nucleation densities Journal of Rheology 63, 851 (2019); https://doi.org/10.1122/1.5109893 A review of thixotropy and its rheological modeling Journal of Rheology 63, 477 (2019); https://doi.org/10.1122/1.5055031 Extensional rheology of highly-entangled α-olefin molecular bottlebrushes Journal of Rheology 63, 917 (2019); https://doi.org/10.1122/1.5110557 Rheo-PIV analysis of the vane in cup flow of a viscoplastic microgel Journal of Rheology 63, 905 (2019); https://doi.org/10.1122/1.5118900 Review: Rheology of noncolloidal suspensions with non-Newtonian matrices Journal of Rheology 63, 705 (2019); https://doi.org/10.1122/1.5085363 The unification of disparate rheological measures in oscillatory shearing Physics of Fluids 31, 073107 (2019); https://doi.org/10.1063/1.5106378 Strain shifts under stress-controlled oscillatory shearing in theoretical, experimental, and structural perspectives: Application to probing zero-shear viscosity Johnny Ching-Wei Lee,1 Yu-Tong Hong,1 Katie M. Weigandt,2 Elizabeth G. Kelley,2 Hyunjoon Kong,1 and Simon A.
    [Show full text]