VITAL BRACE Normal Manual EN2
Total Page:16
File Type:pdf, Size:1020Kb
8-years old and above This product is powered with lithium-ion polymer batteries. Please follow your local district and area rules when discarding the product. ©Akiyoshi Hongo, Toei Animation ©BANDAI Instruction Manual ver.1.0 ●This instruction manual applies to ver.BLACK and ver.WHITE. ●Images used in the instruction manual may not reflect the actual product. ●Sample images only. Notice Please read before use. ●The product is intended for ages 8 and older. Do not give the product to anyone below the specified age. Caution ●Please read the instruction manual. ●Charge the product in a visible location and away from combustibles. ●Magnets are used on the product’s electronic components. Please do not use the ●Check the product and power cable before charging. Do not charge if product with pacemakers. the product or the power cable is broken or worn. ●Do not focus on the LED screen or the flashing sensor lights for an extended ●Remove the power cable and stop use of the product if the product is period. <Improper use of the device’s batteries may lead to overheating, hot, an unusual odor can be smelled, the product warps, smoke can be exploding, fires, and fluid leakage. Please read the following Caution content.> seen, or any other anomalies are detected while charging or using the ●Do not short circuit the product under any circumstance. product. ●Do not charge the product when it is fully charged as it can lead to short circuiting. ●Remove the power cable and stop use of the product if the product does not show that it is being charged, or the product does not charge ●Do not wet, place in fire, take apart, or solder the product. after 4 hours of charging. ●Do not place the product near fires or use, charge, and store under extreme ●Do not leave the power cable connected to the product after the product temperatures and conditions. is charged. ●This product is powered with lithium-ion polymer batteries. Follow your local ●Do not wrap limbs or fingers with the power cable as it can strangle district and area rules when discarding the product. blood flow. <Usage Warnings> ●Discard plastic packaging immediately after opening. ●Do not place the product on resin treated products such as sofas, seats, and tiles. Long-term exposure may discolor the product. ●Do not forcibly pull or bend moveable parts or attachments. Do not place Do not wet Do not place Do not wrap ●The product is composed of various electronic components. Do not drop, wet, dirty, or dismantle the product. Do not use or store in your mouth near fire the product under extreme temperatures. ●Turn the power off and back on again if the product encounters an error. ●Use the power cable specific to the product. Do not use any conventional power cable to charge the product. ●Do not tug on the cord when removing the power cable as it can break or lead to complications. ●Do not use the product under cold temperatures. The cold may affect the battery, and prevent proper function of the product. ●We are not responsible for loss of data from use of the product. What is the Vital Bracelet? The ultimate in devices, “VITAL BRACELET”, brings play to your daily life by utilizing the number of steps you take and your heartbeat. This wearable device lets you train and Digivolve characters based on data derived from your activity. Table of Contents Turning the Power On and Charging the Bracelet A DIGIMON is Born Status Information Battles Backup Using the VS Dim Setting the Date and Time The Home Screen DIGIMON Information Death and Injury Using the App Settings Initial Dim User Registration Screen Information Missions Digivolution How to Use the Dim Content Description Vital Bracelet...1 Dim Card VS Dim Card Vital Bracelet Back Impulse City Dim card...1 Dim Port Charging cable...1 VS Dim card...1 Select Button Dim Power Switch Charging Cable Charging Cable Port Confirm Button Turning the power on and charging the bracelet How to charge the bracelet Push the power switch on the back of the Vital Bracelet toward the “・” part until you hear a click. Please charge the bracelet Power Status Insert the USB Micro on the *Do not look directly at the sensor light. It may cause nausea or other visual disorders. if you notice that the power USB charging cable to the is low, or if the low power charging cable port. sign appears (as shown on the right). Please remove the bracelet before charging. Insert the USB on Remove the charging the USB charging cable after the bracelet cable to your PC or is fully charged. Please use the product after it has been fully charged. laptop port. When charging, please use the included charging cable. The power may not go on if the product has not been sufficiently charged. *Remove the charging cable immediately if the charging sign *Connect the USB charging cable to a PC or laptop. does not appear when charging, or the product does not fully Inappropriate use may lead to smoke, fire, and other hazards. charge after 4 hours. Setting the Date and Time Use the Select Button to choose the “Year”, and then press the Confirm Button to ①Press the Select Button to set the date and time. transition to the “Month” and the “Day”. Use the Confirm Button to choose “OK” to ②Use the Confirm Button to set the year, day, and time. transition to the time setting. Choose “NG” to return to the “Year” setting. *You can cycle between “Year”, “Date”, and “Time” by holding down on the Select Button. *Clock precision: approximately ±10 seconds daily. Initial Dim User Registration *The Dim registers the user information used within the Vital Bracelet when initially inserted. Once used, the Dim cannot be used on other Vital Bracelets. Remove the Dim Insert the Dim Data transfer Transfer complete Removing the Dim Remove the Dim from Insert the Dim into the Dim The data stored within the Once the copy is Remove the Dim the Dim card. slot on the Vital Bracelet. Dim will copy the data into done, the Dim’s once the image the Vital Bracelet. It will information will on the right take approximately display. displays. 50 seconds for the copying to complete. *The VS Dim card is not used here. Error ① Error ② The error shown on the The error shown on the left appears when the copy left appears when the fails. Remove the Dim, and then follow the data is broken, or an instructions shown on the bracelet to reinsert the Dim. unusable Dim is This error will also appear when a Dim registered on inserted. another Vital Bracelet has been inserted. *Use the bracelet fully charged. Do not use the bracelet on low power. Caution *Do not turn off the power while the Dim is inserted. *Do not remove the Dim until notified as you may lose your DIGIMON data. A DIGIMON is born Wearing your Vital Bracelet Hatching your Digi-Egg Your very own DIGIMON Transition to the home screen Put the Vital Bracelet on The Digi-Egg will hatch Once the data is read, You will transition to the when the image on the using the copied data from your DIGIMON will home screen where you right appears. the Dim. appear from the hatched can begin training your Digi-Egg. DIGIMON. The Home Screen DIGIMON’s mental state The DIGIMON’s mental state is broken into 3 levels. The DIGIMON’s attack power during battle, and the amount of VITAL points you gain from exercise and training changes depending on the DIGIMON’s mental state. Time VITAL *The conditions required for the mental state to change Good Normal Bad Mile differs between DIGIMONS. DIGIMON’s mental state Current & status DIGIMON DIGIMON’s status What the DIGIMON does changes depending on your heartbeat and your Mile value. *Please note that the “Mile” noted refers to the “Milestone Point” gained from the number of steps taken. Running Training Walking Idle Sleeping Injured Healing Item Effect Bracelet Not Worn *The DIGIMON will be idle when you are not exercising or having any major physical activity while you have the Vital Bracelet on. Screen Information Press the Select Button to cycle through the icons. Press the Confirm Button to view details of the selected icon. Status DIGIMON Mission Backup App Settings Select Button Confirm Button DIGIMON’s sleep hoursThe time when the DIGIMON goes to sleep differs depending on the DIGIMON. *The VITAL value does not change while sleeping. *You cannot hold battles or take on missions while the DIGIMON is asleep. *The Mile value will reset when the date changes, even while the DIGIMON is asleep. The VITAL value does not change while the DIGIMON is asleep. Use this opportunity to remove and charge the Vital Bracelet. Status Information Press the Select Button to cycle through the screen within the menu. VITAL confirmation screen Heartbeat confirmation screen Calibrate base heartbeat rate After the status confirmation screen, VITAL While on the vital confirmation While on the heartbeat press the Confirm Button to check the screen, press the Select Button to Standard Rate (The base rate confirmation screen, hold down VITAL value. check on your heartbeat rate. where the DIGIMON’s activity the Select Button and the rate is L0) Confirm Button to calibrate the *The VITAL value changes depending on base heartbeat rate. Your Current Rate (The heartbeat your “heartbeat”, “Mile”, and “battle heartbeat rate is being updated rate within the last 5 minutes) results”. when the image on the right is *How much your VITAL value increases *The heartbeat rate is strictly a game based rate, and is not medically accurate.