DOCSLIB.ORG

Version 1 Last Updated 23/05/2019 Updated by Amanda Fairholme Comments Updated to Match VE 9.0 FP7 Release Basic Support by Prod

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Version 1 Last Updated 23/05/2019 Updated by Amanda Fairholme Comments Updated to Match VE 9.0 FP7 Release Basic Support by Prod Version 1 Last Updated 23/05/2019 Updated By Amanda Fairholme Updated to match VE 9.0 Comments FP7 release Basic Support by Product Capabilities, Limitations and comments by Processing Workflow VE Generator - Standalone Category File Format Type Extension(s) VE Generator 9.0 VE-Generator - SAP-PLM as primary PDM; Conversion workflow VE-Generator - Foreign PDM, Integrated using VDI (Not integrated with SAP ERP) Version support Import Export Limitations and comments Limitations and comments Limitations and comments Primary CAD Design Web Format 3D/2D DWF 0.36 up to 7.7 Yes Yes No known limitations No known limitations Not supported Formats (Autodesk) For import and export limitations, see the attached document: For import and export limitations, see the attached document: AutoCAD DWG Drawing Publishing Limitations_FP7.pdf. AutoCAD DWG Drawing Publishing Limitations_FP7.pdf. 1. Semantic PMI not supported - Text is imported as geometry 1. Semantic PMI not supported - Text is imported as geometry AutoCAD Drawing R11/ R12 up to R27 2. Parametric object import is limited to the following types: circles, 2. Parametric object import is limited to the following types: circles, 3D /2D DXF Yes Yes Not supported Interchange (2014-2018) circular arcs, ellipses, elliptical arcs, text. circular arcs, ellipses, elliptical arcs, text. 3. Per-face normals 3. Per-face normals 4. Per-face transparency 4. Per-face transparency Note: This is also a 2D file format Note: This is also a 2D file format For import and export limitations, see the attached document: For import and export limitations, see the attached document: R11/ R12 up to R27 AutoCAD DWG Drawing Publishing Limitations_FP7.pdf AutoCAD DWG Drawing Publishing Limitations_FP7.pdf AutoCAD Drawing Object 3D /2D DWG, DXF Yes Yes Not supported (2014-2018) Note: This is also a 2D file format Note: This is also a 2D file format For import and export limitations, see the attached document: AutoCAD DWG Drawing Publishing Limitations_FP7.pdf AutoCAD Sheet Set File 3D /2D DST Versions 7 and earlier Yes No Not supported Not supported Note: This is also a 2D file format 1. 2D vector data not supported ACIS Assembly and Part 3D SAT, SAB Versions 14 up to 21 Yes No 2. Animations not supported Not supported Not supported 3. Textures not supported 1. If a model is made up of surfaces, results sometimes have wrong 1. If a model is made up of surfaces, results sometimes have wrong 1. If a model is made up of surfaces, results sometimes have wrong normals, and holes in the joint of patches normals, and holes in the joint of patches normals, and holes in the joint of patches 2. Animation created in CATIA is not present in the Visual Enterprise 2. Animation created in CATIA is not present in the Visual Enterprise 2. Animation created in CATIA is not present in the Visual Enterprise DLV, file file file MODEL, CATIA V4 3D Up to 4.24 Yes No 3. Textures assigned in CATIA are not present in the Visual Enterprise 3. Textures assigned in CATIA are not present in the Visual Enterprise 3. Textures assigned in CATIA are not present in the Visual Enterprise SESSION, file file file EXP 4. SOLID MOCKUP entities from CATIA V4 are imported as 4. SOLID MOCKUP entities from CATIA V4 are imported as 4. SOLID MOCKUP entities from CATIA V4 are imported as tessellated geometry. Tessellation may look coarse, and will not tessellated geometry. Tessellation may look coarse, and will not tessellated geometry. Tessellation may look coarse, and will not change with tessellation control parameters. change with tessellation control parameters. change with tessellation control parameters. 1. No Kinematics support 1. No Kinematics support 1. No Kinematics support 2. No texture support 2. No texture support 2. No texture support 3. PMI to PMI highlighting not supported 3. PMI to PMI highlighting not supported 3. PMI to PMI highlighting not supported 4. CATIA5 piping not supported 4. CATIA5 piping not supported 4. CATIA5 piping not supported 5. No electric features and reservations support 5. No electric features and reservations support 5. No electric features and reservations support CATPART, 6. UV Coordinates from Mesh not supported 6. UV Coordinates from Mesh not supported 6. UV Coordinates from Mesh not supported CATIA V5 3D CATPRODUCT, Up to V5 R28 Yes No 7. Metadata in VE Scene Tree sorts in alphabetical order so original 7. Metadata in VE Scene Tree sorts in alphabetical order so original 7. Metadata in VE Scene Tree sorts in alphabetical order so original CATSHAPE order is not preserved order is not preserved order is not preserved 8. Initial view is not respected when loaded in VE 8. Initial view is not respected when loaded in VE 8. Initial view is not respected when loaded in VE Note: Extended Workbench features: Note: Extended Workbench features: Note: Extended Workbench features: Not all Extended Workbench features are supported. Contact the VE Not all Extended Workbench features are supported. Contact the VE Not all Extended Workbench features are supported. Contact the VE CAD Product Owner if you are using Extended Workbench features. CAD Product Owner if you are using Extended Workbench features. CAD Product Owner if you are using Extended Workbench features. 1. PMI - GDT /FDT/ Mark-up import , Model views / Captures (with section geometry) not supported 2. Drawing (2D) representation not supported 3. Construction Geometry import (2D wireframes ,POINTS , Axis , Up to V5-6R2016, Infinite Planes) not supported CATIA V6 (3DXML) 3D 3dxml R2018x Support CATIA Yes No 4. Exact Geometry / NURBS /Solids Object and no Tessellation Not supported Not supported V6 / 3DExperience controls 5. Textures and UV coordinates not supported 6. Animation/ Kinematics not supported 7. No support for Representation from CATIA V5, Workspaces from CATIA V 4 and Configuration from SolidWorks CGR files are supported if referenced from a CATIA 5 assembly. 1. Animations not supported 1. Animations not supported In this case, the following limitations apply: CATIA Graphical 2. Normals not supported 2. Normals not supported 1. Animations not supported 3D CGR R14 up to R24 Yes No Representation 3. Textures not supported 3. Textures not supported 2. Normals not supported 4. UV Coordinates from Mesh not supported 4. UV Coordinates from Mesh not supported 3. Textures not supported 4. UV Coordinates from Mesh not supported Basic Support by Product Capabilities, Limitations and comments by Processing Workflow VE Generator - Standalone Category File Format Type Extension(s) VE Generator 9.0 VE-Generator - SAP-PLM as primary PDM; Conversion workflow VE-Generator - Foreign PDM, Integrated using VDI (Not integrated with SAP ERP) Version support Import Export Limitations and comments Limitations and comments Limitations and comments 1. Requires ProE license for translation when using Assembly upload 1. Requires ProE license for translation when using Assembly upload 1. Requires ProE license for translation when using Assembly upload method method method Creo Parametric ASM, 2001 - Creo Parametric 2. No assembly level features or family tables support when using 2. No assembly level features or family tables support when using 2. No assembly level features or family tables support when using 3D Yes No (Pro/ENGINEER) Assembly XAS 5.0 Asset upload method Asset upload method Asset upload method 3. PMI and Views support (Initial Release) 3. PMI and Views support (Initial Release) 3. PMI and Views support (Initial Release) 4. Animations not supported 4. Animations not supported 4. Animations not supported 1. Requires ProE license for translation when using Assembly upload 1. Requires ProE license for translation when using Assembly upload 1. Requires ProE license for translation when using Assembly upload method method method 2. No assembly level features or family tables support when using 2. No assembly level features or family tables support when using 2. No assembly level features or family tables support when using Creo Parametric PRT, 2001 - Creo Parametric 3D Yes No Asset upload method Asset upload method Asset upload method (Pro/ENGINEER) Part XPR 5.0 3. PMI and Views support (Initial Release) 3. PMI and Views support (Initial Release) 3. PMI and Views support (Initial Release) 4. No texture support 4. No texture support 4. No texture support 5. Animations not supported 5. Animations not supported 5. Animations not supported 1. No texture support 1. No texture support 1. No texture support Creo Parametric 2001 - Creo Parametric 2. Animations not supported 2. Animations not supported 2. Animations not supported (Pro/ENGINEER) Neutral 3D NEU Yes No 5.0 3. PMI ID and semantic PMI information is not available 3. PMI ID and semantic PMI information is not available 3. PMI ID and semantic PMI information is not available Assembly and Part 4. No wireframe, points, and coordinate systems 4. No wireframe, points, and coordinate systems 4. No wireframe, points, and coordinate systems IGES, IGES 3D Up to 5.2 Yes No No texture support No texture support Not supported IGS 1.Scene tree hierarchy does not group similar entities 2.Only geometrical representations are imported. No project , process, and operation-related information is imported. 3. GlobalID from each IFC entity has been used as persistent Industry Foundation identifier. Non unique global ids will be replaced with new one and 3D IFC, IFCXML IFC 2x3,IFC 2x4 and IFC4 Yes No Not supported Not supported Classes (IFC ) Format will be reported as warning. 4.Initial view may not be respected when loaded in Visual Enterprise scene 5.Old IFC format 2x2 is not supported 6. Colors defined for entities as part of layers are not supported. Valid for both Solids and Quick View modes: Valid for both Solids and Quick View modes: Valid for both Solids and Quick View modes: 1. Where an assembly has sub folders and files with the same name 1.
Load more

Recommended publications
  • DXF Reference
    AutoCAD 2012 DXF Reference February 2011 © 2011 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Intent, Autodesk Inventor, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Beast, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, Illuminate Labs
    [Show full text]
  • Metadefender Core V4.12.2
    MetaDefender Core v4.12.2 © 2018 OPSWAT, Inc. All rights reserved. OPSWAT®, MetadefenderTM and the OPSWAT logo are trademarks of OPSWAT, Inc. All other trademarks, trade names, service marks, service names, and images mentioned and/or used herein belong to their respective owners. Table of Contents About This Guide 13 Key Features of Metadefender Core 14 1. Quick Start with Metadefender Core 15 1.1. Installation 15 Operating system invariant initial steps 15 Basic setup 16 1.1.1. Configuration wizard 16 1.2. License Activation 21 1.3. Scan Files with Metadefender Core 21 2. Installing or Upgrading Metadefender Core 22 2.1. Recommended System Requirements 22 System Requirements For Server 22 Browser Requirements for the Metadefender Core Management Console 24 2.2. Installing Metadefender 25 Installation 25 Installation notes 25 2.2.1. Installing Metadefender Core using command line 26 2.2.2. Installing Metadefender Core using the Install Wizard 27 2.3. Upgrading MetaDefender Core 27 Upgrading from MetaDefender Core 3.x 27 Upgrading from MetaDefender Core 4.x 28 2.4. Metadefender Core Licensing 28 2.4.1. Activating Metadefender Licenses 28 2.4.2. Checking Your Metadefender Core License 35 2.5. Performance and Load Estimation 36 What to know before reading the results: Some factors that affect performance 36 How test results are calculated 37 Test Reports 37 Performance Report - Multi-Scanning On Linux 37 Performance Report - Multi-Scanning On Windows 41 2.6. Special installation options 46 Use RAMDISK for the tempdirectory 46 3. Configuring Metadefender Core 50 3.1. Management Console 50 3.2.
    [Show full text]
  • An Approach to Accessing Product Data Across System and Software Revisions', Advanced Engineering Informatics, Vol
    Citation for published version: Ball, A, Ding, L & Patel, M 2008, 'An approach to accessing product data across system and software revisions', Advanced Engineering Informatics, vol. 22, no. 2, pp. 222-235. https://doi.org/10.1016/j.aei.2007.10.003 DOI: 10.1016/j.aei.2007.10.003 Publication date: 2008 Document Version Peer reviewed version Link to publication NOTICE: this is the author’s version of a work that was accepted for publication in Advanced Engineering Informatics. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Advanced Engineering Informatics, vol 22, issue 2, 2008, DOI 10.1016/j.aei.2007.10.003 University of Bath Alternative formats If you require this document in an alternative format, please contact: [email protected] General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. Take down policy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Download date: 26. Sep. 2021 An Approach to Accessing Product Data across System and Software Revisions Alexander Ball1, Lian Ding2, and Manjula Patel1 1UKOLN, University of Bath, Bath, UK 2Department of Mechanical Engineering, University of Bath, Bath, UK 3rd October 2007 Abstract Long-term users of engineering product data are hampered by the ephemeral nature of CAD file formats and the applications that work with them.
    [Show full text]
  • Opentext Brava! Desktop Supported Formats By
    OpenText™ Brava!™ Desktop Supported Formats This list represents the current known, tested formats supported by Brava! Desktop. Please contact us with any format questions. Brava! Desktop TX and TXL Supported Formats Extensions Neutral Formats OpenText Content Sealed Format CSF Adobe Portable Document Format PDF Tagged Image File Format TIF, TIFF Image Formats CALS (Group IV) CAL, CG4, GP4, MIL CALS (ISO 8613) ISO, CAL Graphics Interchange Format GIF JPEG Compressed Image JPG, JPEG, JP2, JPM IBM MODCA Files ICA GEM Paint IMG Portable Network Graphic PNG Encapsulated PostScript PS, EPS Windows Bitmap BMP Windows Media Photo WDP, HDP Additional Document Formats XML Paper Specification XPS Brava! Desktop DXP Supported Formats Extensions Neutral Formats OpenText Content Sealed Format CSF Tagged Image File Format TIF, TIFF CAD Formats Autodesk AutoCAD Drawing (through version 2020) DWG Autodesk AutoCAD DXF (through version 2020) DXF Autodesk Design Web Format (through version 2020) DWF, DWFX Image Formats CALS (Group IV) CAL, CG4, GP4, MIL CALS (ISO 8613) ISO, CAL Enhanced Metafile EMF, WMF 2020-04 16.6.2 1 Supported Formats Extensions Graphics Interchange Format GIF JPEG Compressed Image JPG, JPEG, JP2, JPM IBM MODCA Files ICA GEM Paint IMG Portable Network Graphic PNG Windows Bitmap BMP Windows Media Photo WDP, HDP Additional Document Formats XML Paper Specification XPS Brava! Desktop CXL Supported Formats Extensions Neutral Formats OpenText Content Sealed Format CSF Adobe Portable Document Format PDF Tagged Image File Format TIF, TIFF CAD
    [Show full text]
  • Forcepoint DLP Supported File Formats and Size Limits
    Forcepoint DLP Supported File Formats and Size Limits Supported File Formats and Size Limits | Forcepoint DLP | v8.8.1 This article provides a list of the file formats that can be analyzed by Forcepoint DLP, file formats from which content and meta data can be extracted, and the file size limits for network, endpoint, and discovery functions. See: ● Supported File Formats ● File Size Limits © 2021 Forcepoint LLC Supported File Formats Supported File Formats and Size Limits | Forcepoint DLP | v8.8.1 The following tables lists the file formats supported by Forcepoint DLP. File formats are in alphabetical order by format group. ● Archive For mats, page 3 ● Backup Formats, page 7 ● Business Intelligence (BI) and Analysis Formats, page 8 ● Computer-Aided Design Formats, page 9 ● Cryptography Formats, page 12 ● Database Formats, page 14 ● Desktop publishing formats, page 16 ● eBook/Audio book formats, page 17 ● Executable formats, page 18 ● Font formats, page 20 ● Graphics formats - general, page 21 ● Graphics formats - vector graphics, page 26 ● Library formats, page 29 ● Log formats, page 30 ● Mail formats, page 31 ● Multimedia formats, page 32 ● Object formats, page 37 ● Presentation formats, page 38 ● Project management formats, page 40 ● Spreadsheet formats, page 41 ● Text and markup formats, page 43 ● Word processing formats, page 45 ● Miscellaneous formats, page 53 Supported file formats are added and updated frequently. Key to support tables Symbol Description Y The format is supported N The format is not supported P Partial metadata
    [Show full text]
  • Opentext Brava Enterprise Supported Formats
    OpenText™ Brava!™ Enterprise Supported Formats This list represents the current known, tested formats supported by Brava! Enterprise. On a Windows operating system, Brava! uses 64-bit technology and typically supports any format with access to a Windows-based application that supports the print canonical verb. Linux Publishing Agent compatibility is noted where applicable. Please contact us with any format questions. 2D CAD FORMATS EXTENSION LINUX SUPPORT 906/907 Plot File 906/907 Autodesk AutoCAD Drawing (through version 2020) DWG ✓ Autodesk AutoCAD DXF (through version 2020) DXF ✓ Autodesk Design Web Format (through version 2020) DWF, DWFX ✓ Bentley Tiled Group 4 Raster TG4 ✓ CADKEY PRT Computer Graphics Metafile CGM GTX Group III, IV G3, G4 GTX Runlength RNL HP CAD ME10 (through version 13) CMI, MI HPGL Plot File 000, HGL, PLT, HPGL ✓ Intergraph Group IV CIT ✓ Intergraph Runlength RLE IronCAD drawing – embedded PDF ICD MicroStation Drawing (through version 8.11, including XM, V8i) DGN ✓ The Information Company 1 2020-09 16 EP7 Brava! Enterprise Formats 3D CAD FORMATS 1 EXTENSION LINUX SUPPORT Adobe 3D PDF 7 PDF ✓ Autodesk AutoCAD Drawing DWG ✓ Autodesk Design Web Format DWF ✓ Autodesk Inventor (through version 2019) IPT, IAM ✓ Autodesk Revit 8 (2015 to 2020) RVT, RFA ✓ CATIA V4 MODEL, SESSION, DLV, EXP ✓ CATIA V5 CATPart, CATProduct, ✓ CATShape, CGR CATIA V6 3DXML ✓ HOOPS Streaming Format 2 HSF ✓ I-DEAS and NX I-DEAS 6 MF1, ARC, UNV, PKG ✓ Industry Foundation Classes (versions 2, 3, 4) IFC ✓ Initial Graphics Exchange Specification
    [Show full text]
  • An Overview of 3D Data Content, File Formats and Viewers
    Technical Report: isda08-002 Image Spatial Data Analysis Group National Center for Supercomputing Applications 1205 W Clark, Urbana, IL 61801 An Overview of 3D Data Content, File Formats and Viewers Kenton McHenry and Peter Bajcsy National Center for Supercomputing Applications University of Illinois at Urbana-Champaign, Urbana, IL {mchenry,pbajcsy}@ncsa.uiuc.edu October 31, 2008 Abstract This report presents an overview of 3D data content, 3D file formats and 3D viewers. It attempts to enumerate the past and current file formats used for storing 3D data and several software packages for viewing 3D data. The report also provides more specific details on a subset of file formats, as well as several pointers to existing 3D data sets. This overview serves as a foundation for understanding the information loss introduced by 3D file format conversions with many of the software packages designed for viewing and converting 3D data files. 1 Introduction 3D data represents information in several applications, such as medicine, structural engineering, the automobile industry, and architecture, the military, cultural heritage, and so on [6]. There is a gamut of problems related to 3D data acquisition, representation, storage, retrieval, comparison and rendering due to the lack of standard definitions of 3D data content, data structures in memory and file formats on disk, as well as rendering implementations. We performed an overview of 3D data content, file formats and viewers in order to build a foundation for understanding the information loss introduced by 3D file format conversions with many of the software packages designed for viewing and converting 3D files.
    [Show full text]
  • Get the Course Handout
    Designing a Website to Host AutoCAD® Content David Cohn CD25-1 If you want a highly practical introduction to web publishing that will focus on AutoCAD-based content, this class is for you. Learn all about the tools available to you for web-enabling AutoCAD drawings. You’ll see how to add and manage hyperlinks in AutoCAD drawings, save drawings as design web format (DWF) files, create i-drop content, and incorporate it all into custom-designed web pages. This class includes actual HTML coding and practical real-world examples. About the Speaker: David has more than 20 years of hands-on experience with AutoCAD as a user, developer, author, and consultant. He is an application engineer with The PPI Group, a contributing editor to Desktop Engineering magazine, the former publisher and editor-in-chief of CADCAMNet and Engineering Automation Report, the former senior editor of CADalyst magazine, and the author of more than a dozen books on AutoCAD. A licensed architect, David was also one of the earliest AutoCAD third-party software developers, creating numerous AutoCAD add-on programs. As an industry consultant, David has worked with many companies including Autodesk. He teaches college-level AutoCAD courses and is always a popular presenter at both Autodesk University and AUGI CAD Camps. [email protected] Designing a Website to Host AutoCAD® Content Introduction There are many reasons why people want to make AutoCAD content available on the web. For example, you may want to show off your work, provide a website for collaborating with others, make drawings available as part of an online RFQ, or create an online catalog of standard components.
    [Show full text]
  • IDOL Connector Framework Server 12.0 Administration Guide
    Connector Framework Server Software Version 12.0 Administration Guide Document Release Date: June 2018 Software Release Date: June 2018 Administration Guide Legal notices Copyright notice © Copyright 2018 Micro Focus or one of its affiliates. The only warranties for products and services of Micro Focus and its affiliates and licensors (“Micro Focus”) are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Micro Focus shall not be liable for technical or editorial errors or omissions contained herein. The information contained herein is subject to change without notice. Trademark notices Adobe™ is a trademark of Adobe Systems Incorporated. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. UNIX® is a registered trademark of The Open Group. Documentation updates The title page of this document contains the following identifying information: l Software Version number, which indicates the software version. l Document Release Date, which changes each time the document is updated. l Software Release Date, which indicates the release date of this version of the software. To verify you are using the most recent edition of a document, go to https://softwaresupport.softwaregrp.com/group/softwaresupport/search-result?doctype=online help. You will also receive new or updated editions of documentation if you subscribe to the appropriate product support service. Contact your Micro Focus sales representative for details. To check for new versions of software, go to https://www.hpe.com/software/entitlements. To check for recent software patches, go to https://softwaresupport.softwaregrp.com/patches. The sites listed in this section require you to sign in with a Software Passport.
    [Show full text]
  • Version 1 Last Updated 23/05/2019 Updated by Amanda Fairholme
    Version 1 Last Updated 23/05/2019 Updated By Amanda Fairholme Updated to match VE Comments Viewer 9.0 FP7 release Format Notes Category File Format Type Extension(s) VE Viewer Known restrictions and comments 3D File Formats Autodesk 3D Studio 3D Scene 3DS Autodesk 3D Studio Project 3D Scene PRJ Design Web Format 3D/2D DWF (Autodesk) The file formats DWG and DXF have 2D characteristics when vector lines are applied and do not function in the same manner as pure 3D file formats. For example, you cannot rotate a model rendered with AutoCAD Drawing 3D /2D DXF vector lines and saved in a DWG format. Interchange If you are using SAP 3D Visual Enterprise Author, CAD files should be saved as .rh files before being inserted or dragged into Office documents. The file formats DWG and DXF have 2D characteristics when vector lines are applied and do not function in the same manner as pure 3D file formats. For example, you cannot rotate a model rendered with AutoCAD Drawing Object 3D /2D DWG, DXF vector lines and saved in a DWG format. If you are using SAP 3D Visual Enterprise Author, CAD files should be saved as .rh files before being inserted or dragged into Office documents. FiLMBOX 3D Scene FBX JT 3D JT JT file format versions 6.4 to 10.2 SketchUp Document 3D Scene SKP Hewlett-Packard Graphics 3D Scene HPGL, PLT Library LightWave 3D and Binary 3D Scene LWO, LW Object LightWave Scene 3D Scene LWS Open Inventor File 3D Scene IV OpenFlight Scene 3D Scene FLT Description Database Rhinoceros 3D Model 3D Scene 3DM The 3D Visual Enterprise native binary 3D format.
    [Show full text]
  • Sketchup in Digital Archives
    SketchUp in digital archives Software and file format analysis and exploration of the options for digital preservation SketchUp software and file format 2 Title SketchUp software and file format: exploration of the options for digital preservation Author(s) Henk Vanstappen, Datable Date September 2019 License This document is licensed under the Attribution-ShareAlike 4.0 ​ Unported (CC BY-SA 4.0) license. Copyright may apply on third party ​ images SketchUp software and file format 3 Contents 1. Executive Summary 5 ​ ​ 2. Introduction 6 ​ ​ 3. SketchUp software 7 ​ ​ 3.1. Sketchup products and product suites 7 ​ ​ 3.1.1. Product suites 7 ​ ​ 3.1.2. SketchUp for Web 8 ​ ​ 3.1.3. Sketchup Pro (Desktop) 8 ​ ​ 3.1.4. Sketchup LayOut 8 ​ ​ 3.1.5. SketchUp Viewers 8 ​ ​ 3.1.6. 3D Warehouse 9 ​ ​ 3.1.7. Extensions Warehouse 9 ​ ​ 3.1.8. Trimble Connect 9 ​ ​ 3.2. Developer tools 9 ​ ​ 3.2.1. Ruby API 9 ​ ​ 3.2.2. Sketchup SDK 9 ​ ​ 3.3. Software license 10 ​ ​ 3.4. System requirements 10 ​ ​ 3.5. Software features and tools 11 ​ ​ 3.5.1. Features history 11 ​ ​ 3.5.2. Drawing, Extrusion tool (push/pull) and Follow Me 13 ​ ​ 3.5.3. Smoothed edges and sandbox 13 ​ ​ 3.5.4. Dynamic components 14 ​ ​ 3.5.5. Style Builder 15 ​ ​ 3.5.6. Solid modeling tools 15 ​ ​ 3.5.7. Geolocation and display in Google Earth 16 ​ ​ 3.5.8. BIM support 16 ​ ​ 3.5.9. Extensions or plugins 16 ​ ​ 4. Sketchup model and file format 17 ​ ​ 4.1. SketchUp model hierarchy 17 ​ ​ 4.2.
    [Show full text]
  • Transition Guide for Users of Rhino Software
    Autodesk Alias 2011 Transition Guide for Users of Rhino Software March 2010 2 Copyright and trademarks © 2010 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer’s Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green
    [Show full text]