Be Part of the BIM Revolution. Improve Your Process with Building Information Modeling and Intelligent Structural Steel Detailing and Fabrication Software

Total Page:16

File Type:pdf, Size:1020Kb

Be Part of the BIM Revolution. Improve Your Process with Building Information Modeling and Intelligent Structural Steel Detailing and Fabrication Software Be part of the BIM revolution. Improve your process with Building Information Modeling and intelligent structural steel detailing and fabrication software. Minimize time from design to fabrication Intelligent 3D modeling software for structural steel detailing and fabrication that helps to improve accuracy and reduce time from design to installation. 3D steel modeling with the intelligence of BIM user-friendly library enables you to access simple and complex structural connections, and when ® Autodesk Advance Steel structural steel detailing member size changes are made, connections are software is built to help structural engineers, automatically updated. detailers, and fabricators more quickly and easily create information-rich building models that can A built-in steel connection design engine that help drive the fabrication of steel components. checks connection compliance against AISC and EC3 standards helps validate your models. Check Building Information Modeling (BIM) is a process- your steel connections at any time against industry based workflow that helps businesses work more standards and then run a report with formulas efficiently and helps teams complete projects on included for printing and reference. time and on budget. Advance Steel helps detailers and fabricators model with intelligence and Miscellaneous steel modeling helps designers and engineers extend their BIM Dedicated tools for stairs, railings and cage ladders. workflows through to detailed modeling. Advance Steel also has powerful tools for miscellaneous steel creation. Create more be automatically unfolded during the creation of accurate stairs and railings with the use of special your shop drawings, and the pattern can be fully wizards. These dedicated wizards save more represented within the CNC data to help drive time by helping you quickly generate straight fabrication. and spiral stairs, straight and curved railings, and cage ladders. Once created, you can more easily Advance Steel also enables you to import other modify the properties using a large selection of non-standard components for detailing and shop customizable parameters to suit the needs of your drawing creation, helping you create a full as-built project. model. For example, you can import components such as engines and tanks and add welds and Additionally, you can design sheet metal or bolts to them for better coordination, clash model complex folded plate by using specific detection, and more accurate bills of material. commands. These miscellaneous elements can Built-in steel connection design engine. Structural steel modeling Advance Steel helps simplify the structural modeling process through several intelligent features. It contains an extensive library of objects and powerful tools to help designers create structural elements. The dedicated wizard tools make it easier to create elements like trusses, bracings, purlins, and portal frames. The Advance Steel Connection vault gives you access to different types of ready-to-use parametric steel connections. The comprehensive, Large library of parametric steel connections. Customizable documentation for more Interoperable for maximum efficiency Finally, Advance Steel models can be taken efficient fabrication between processes into Autodesk® Navisworks® software for Autodesk Advance Steel software helps to improve Advance Steel offers bidirectional links to design, multidiscipline collaboration, construction the steel detailing process by providing ready-to- analysis, and coordination tools to help you work simulation, and whole-project analysis, enabling use templates that aid the creation of high-quality better with different disciplines and help provide a you to work more closely and efficiently with other shop drawings. The software also has features that validated end-result to your client. project stakeholders to help reduce the risk of automatically generate CNC data for fabrication. unexpected issues at the job site. The Advance Steel Revit® plug-in enables you to Shop drawing templates can be used to create import a Revit design model into Advance Steel so more accurate single part and assembly that you can continue to work where the designer drawings at any time. These can be labeled left off. Once detailing is complete, you can take and dimensioned to your requirements and the model back into Revit and resave it as a native expectations, so the process can fit in your Revit software file, if required for handoff... This with shop needs. The shop templates are easily helps provide a smoother BIM workflow between customizable so that they can be refined to fit in design and fabrication. with your current business needs. The same level of interoperability is available with You can also produce general arrangement Autodesk® Robot™ Structural Analysis Professional drawings for use during erection at the jobsite. structural analysis software. You can import These clear drawings can be quickly created in your model between Advance Steel and Robot isometric, top, elevation, and anchor views, and to optimize your structure steel and evaluate the automatically dimensioned and labeled by using design before fabrication against major standards Saw cut bill of material with explicit pictures. the customizable drawing styles. and codes. Bills of material (BOMs) can be easily created using ready-to-use templates. Quantities are defined by the parts used in the information-rich model, helping to eliminate waste with more accurate BOMs. Information can also be exported to different file formats so that it can be used in third-party systems, such as procurement solutions. Advance Steel also automatically generates computer numerical code (CNC) for use with most machine manufacturers—including welding robots—enabling you to drive fabrication straight from the 3D model. Example of an automatically generated shop drawing. Share models between Advance Steel and Revit. Autodesk Advance Steel has helped me in increasing my competitive position with complex structural steel projects, including cambered bridges detailing market. I benefit from advanced detailing functionality, flexible dimensioning, highly customizable BOM, and DSTV export. Overall, I am pleased that I made the decision to move to Advance Steel. – Ilko Dimitrov IDC-1 Owner & Steel Detailer ACBS Canada Czech Republic and Slovakia GRAITEC Inc GRAITEC s.r.o. 183, St.Charles St. W. Jeremenkova 90a Suite 300 140 00 PRAHA 4 Longueuil (Québec) Canada Tel.: +420/244 016 055 J4H 1C8 Fax: +420/244 016 088 Hotline: Tel.: (450) 674-0657 ext 300 +420/244 016 050 Email: Fax: (450) 674-0665 [email protected] Hotline: (450) 674-0657 Tel verde: 1-800-724-5678 Germany, Switzerland, Austria Email: [email protected] Graitec Innovation GmbH Dietrich-Oppenberg-Platz 1 France D-45127 Essen GRAITEC Sarl Deutschland 17 Burospace Tel.: +49-(0) 201 / 647297-50 Learn more or purchase 91573 Bièvres Cedex Fax: +49-(0) 201 / 647297-88 Tel.: 0825 88 16 50 Email: [email protected] Access specialists worldwide who can provide product expertise, a deep understanding Fax: 33 (0)1 69 85 33 70 Email: [email protected] Italy of your industry, and value that extends beyond your software. To license Autodesk® GRAITEC s.r.l. Advance Steel software, contact an Autodesk Authorized Reseller. Locate a reseller near India Via Petrarca, 3 Graitec Solutions Pvt Ltd 30033 eNoa l (Venice) you at www.autodesk.com/advancesteel. Office No. 1328, Level 13 Tel.: +39 041 5801088 Platinum Techno Park Fax: +39 041 5801402 Plot No. 17/18, Sector 30A Email: [email protected] Autodesk Education Vashi, Navi Mumbai – 400705 INDIA Poland Autodesk offers students and educators a variety of resources to help ensure students Tel.: +91 22 6181 8328 Robobat Polska Sp. z o.o. are prepared for successful design careers, including access to free* software, curricula, Fax: +91 22 6121 4950 ul. Radzikowskiego 47D Email: [email protected] 31-315 Kraków training materials, and other resources. Anyone can get expert guidance at an Tel. : +48 12 639 25 00 Autodesk Authorized Training Center (ATC®) site, and validate skills with Autodesk Fax : +48 12 639 25 02 Email: [email protected] Certification. Learn more at www.autodesk.com/education. Latin America GRAITEC Latin America Romania support from Canada & USA offices GRAITEC Roumanie SRL Autodesk Subscription Tel.: (450) 674-0657 ext 300 Str. Samuil Vulcan, Nr. 10 Fax: (450) 674-0665 Sector 5, CP: 051702 Autodesk® Subscription gives you a greater advantage with powerful cloud-based Hotline: (450) 674-0657 ext 240 Bucuresti, Romania Email: [email protected] Tel.: +40 (21) 410 0119 services, access to the latest software, online technical support, and flexible licensing Fax: +40 (21) 410 0124 privileges.** Learn more at www.autodesk.com/subscription. Mobile: 0729 002 107 Email: [email protected] Russia GRAITEC CJSC Singapore Autodesk 360 Dmitrovskoe shosse 60A Graitec ASIA-PACIFIC ® Moscow, 127474, Russia 541 Orchard Road The Autodesk 360 cloud-based framework provides tools and services to extend Tel.: +7(495) 225-13-65 #09-01 Liat Towers design beyond the desktop. Streamline your workflows, effectively collaborate, and Fax: +7 (495) 225-13-65 Singapore 238881 Email: [email protected] Tel.: +65 6933 1377 quickly access and share your work anytime, from anywhere. Learn more at Fax: +65 6933 1398 www.autodesk.com/autodesk360. Email: [email protected] United Kingdom GRAITEC Ltd USA Riverside House, Brunel Road Gulf Coast Office *Free products are subject
Recommended publications
  • The Steel Detailer Solidworks Download Crack
    The Steel Detailer Solidworks Download Crack 1 / 4 The Steel Detailer Solidworks Download Crack 2 / 4 3 / 4 Download Free eBook:ProtaStructure Suite Enterprise 2019 SP2 - Free epub, ... control over the effective stiffness(cracked), including new settings for basement .... and ProtaBIM thousands of engineers, CAD technicians and project ... and concrete building design, detailing and structural BIM collaboration.. crack, XSTEEL 5.4 of Tekla. crack, free, download, hack, hacked, ..... STEEL CAD DETAILING SYSTEM V6.118 FINAL (C) DESIGN DATA INC.. Has anyone out there used the Steel Detailer add-on? I'm looking for at least something similar that is as powerful as it looks. I haven't been .... Steel Detailing Download, Steel Detailing, Steel Detailing free download, ... DoubleCAD XT Better drafting & detailing with an easy to use CAD software. What's New for SOLIDWORKS 2017 Add-in The Steel Detailer ... are a registered TSD customer you can download the latest release now ».. Advance Steel detailing software is a comprehensive tool structural engineering professionals use for steel detailing, steel fabrication, and ... Download free trial.. Authorized SOLIDWORKS & Markforged reseller in Canada. Providing . BuiltWorks and The Steel Detailer . What's New in. BuiltWorks Modelling & Detailing.. BuiltWorks is an add-in application for real-time steel design within the native SOLIDWORKS environment, providing tools for 3D solid parametric modeling, .... Free download solidworks structural steel shapes Files at Software Informer. ... The Steel Detailer Solidworks Download Crack -- bit.ly/2fAB6pE 9f2d7f2b5e .... The Steel Detailer - Solidworks mining, industrial and commercial solutions. Download and trial The ONLY SOLIDWORKS. ADD ON for Structural Steel.. Mar 7 .... the steel detailer solidworks download crack.
    [Show full text]
  • Summer 2016 (PDF)
    National Institute of Steel Detailing Summer 2016 2016 Person of the Year – Kerri Olsen On the Job Site – Mosaic-Potash Mine Conveyors On the Job Site Behind Every Principal There is a Promise pages 16 - 19 page 7 Annual Meeting 2016 The Ever Changing World pages 12 & 13 of Steel Detailing pages 20-22 INSIDE THIS ISSUE From the Editor . 3 Special Announcements From the President . 4 49th Annual NISD Conference . Inside Front Cover Annual Meeting Event Sponsors – Summer 2016 . 5 NISD's Website & Discussion Board . Inside Back Cover Kerri Olsen 2016 Person of the Year Award . 6 Calendar . 6 Behind Every Principle There is a Promise . 7 & 15 Individual Detailer Certification Application . 8 The “Connection” is the official publication of the National New Members . 9 & 11 Institute of Steel Detailing, Inc ., 2600 Kitty Hawk Rd ., Suite 117, Livermore, CA 94551 . Editor, John Linn NISD Publications Order Form . 10 QPP New & Renewals . 11 NISD is not responsible for any statement made or opinion IDC Program Graduates . 11 expressed herein . All material is for informational purposes NISD 48th Annual Meeting – Orlando, Florida . 12-13 only and is not intended for use without independent, substantiating investigation on the part NISD Membership Application . 14 of potential users . Permission is granted Publications from NISD . 15 to cite or quote from articles herein On the Job Site – Will Rogers Memorial Center . 16-17 provided customary acknowledgement On the Job Site – A Beautiful Stair in Portland . 18-19 of the source is made . The Ever Changing World of Steel Detailing . 20-22 Connection FROM THE EDITOR National Institute of Steel Detailing, Inc.
    [Show full text]
  • Insight MFR By
    Manufacturers, Publishers and Suppliers by Product Category 11/6/2017 10/100 Hubs & Switches ASCEND COMMUNICATIONS CIS SECURE COMPUTING INC DIGIUM GEAR HEAD 1 TRIPPLITE ASUS Cisco Press D‐LINK SYSTEMS GEFEN 1VISION SOFTWARE ATEN TECHNOLOGY CISCO SYSTEMS DUALCOMM TECHNOLOGY, INC. GEIST 3COM ATLAS SOUND CLEAR CUBE DYCONN GEOVISION INC. 4XEM CORP. ATLONA CLEARSOUNDS DYNEX PRODUCTS GIGAFAST 8E6 TECHNOLOGIES ATTO TECHNOLOGY CNET TECHNOLOGY EATON GIGAMON SYSTEMS LLC AAXEON TECHNOLOGIES LLC. AUDIOCODES, INC. CODE GREEN NETWORKS E‐CORPORATEGIFTS.COM, INC. GLOBAL MARKETING ACCELL AUDIOVOX CODI INC EDGECORE GOLDENRAM ACCELLION AVAYA COMMAND COMMUNICATIONS EDITSHARE LLC GREAT BAY SOFTWARE INC. ACER AMERICA AVENVIEW CORP COMMUNICATION DEVICES INC. EMC GRIFFIN TECHNOLOGY ACTI CORPORATION AVOCENT COMNET ENDACE USA H3C Technology ADAPTEC AVOCENT‐EMERSON COMPELLENT ENGENIUS HALL RESEARCH ADC KENTROX AVTECH CORPORATION COMPREHENSIVE CABLE ENTERASYS NETWORKS HAVIS SHIELD ADC TELECOMMUNICATIONS AXIOM MEMORY COMPU‐CALL, INC EPIPHAN SYSTEMS HAWKING TECHNOLOGY ADDERTECHNOLOGY AXIS COMMUNICATIONS COMPUTER LAB EQUINOX SYSTEMS HERITAGE TRAVELWARE ADD‐ON COMPUTER PERIPHERALS AZIO CORPORATION COMPUTERLINKS ETHERNET DIRECT HEWLETT PACKARD ENTERPRISE ADDON STORE B & B ELECTRONICS COMTROL ETHERWAN HIKVISION DIGITAL TECHNOLOGY CO. LT ADESSO BELDEN CONNECTGEAR EVANS CONSOLES HITACHI ADTRAN BELKIN COMPONENTS CONNECTPRO EVGA.COM HITACHI DATA SYSTEMS ADVANTECH AUTOMATION CORP. BIDUL & CO CONSTANT TECHNOLOGIES INC Exablaze HOO TOO INC AEROHIVE NETWORKS BLACK BOX COOL GEAR EXACQ TECHNOLOGIES INC HP AJA VIDEO SYSTEMS BLACKMAGIC DESIGN USA CP TECHNOLOGIES EXFO INC HP INC ALCATEL BLADE NETWORK TECHNOLOGIES CPS EXTREME NETWORKS HUAWEI ALCATEL LUCENT BLONDER TONGUE LABORATORIES CREATIVE LABS EXTRON HUAWEI SYMANTEC TECHNOLOGIES ALLIED TELESIS BLUE COAT SYSTEMS CRESTRON ELECTRONICS F5 NETWORKS IBM ALLOY COMPUTER PRODUCTS LLC BOSCH SECURITY CTC UNION TECHNOLOGIES CO FELLOWES ICOMTECH INC ALTINEX, INC.
    [Show full text]
  • BIM & VDC for Structural Steel
    BIM & VDC for Structural Steel © AISC 2019 by American Institute of Steel Construction All rights reserved. This book or any part thereof must not be reproduced in any form without the written permission of the publisher. The AISC logo is a registered trademark of AISC. The information presented in this publication has been prepared following recognized principles of design and construction. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verification of its accuracy, suitability, and applicability by a licensed engineer or architect. The publication of this information is not a representation or warranty on the part of the American Institute of Steel Construction, its officers, agents, employees, or committee members, or of any other person named herein, that this information is suitable for any general or particular use, or of freedom from infringement of any patent or patents. All represen- tations or warranties, express or implied, other than as stated above, are specifically disclaimed. Anyone making use of the information presented in this publication assumes all liability arising from such use. Caution must be exercised when relying upon standards and guidelines developed by other bodies and incorporated by reference herein since such material may be modified or amended from time to time sub- sequent to the printing of this edition. The American Institute of Steel Construction bears no responsibility for such material other than to refer to it and incorporate it by reference at the time of the initial publication of this edition.
    [Show full text]
  • SUCCESS STORY Tek Steel Ltd Saved Half Its Time with Autodesk® Advance Steel
    SUCCESS STORY Tek Steel Ltd saved half its time with Autodesk® Advance Steel Fire escape for Victoria Health center Nouveau-Brunswick Canada by Tek Steel Ltd Software used: Autodesk® Advance Steel The Victoria Health center, a Community Mental Health Services which promotes optimal mental health and independence for all individuals, requested to replace its non-conformed fire escape stairs. Tek Steel Ltd changed it with a three story self-supporting steel fire escape stairs in conformity to the fire code using Autodesk® Advance Steel. This switch back stair required a special cantilever design for the landings reaching the existing doors. Another challenge was that the project had to be done in a “fast track” manner to fulfill the client’s needs. Autodesk® Advance Steel really simplified the 3D modeling, speeded up the client’s project delivery and was a real money saver! Nowadays, steel detailers must have the good working tool to accomplish their work. As a mid-size steel fabricator doing “ most of our detailing in house we needed a tool able to rapidly create a full 3D model and to extract quick fabrication drawings. After evaluating different solutions Autodesk® Advance Steel was the best fit for our needs because of its capabilities for the miscellaneous steel and AutoCAD compliancy. Even though that I’m a new Advance Steel user I can say that I saved 50% of my time in this project as if I would have used my old StruCAD software. ” Don Dipaolo, Steel detailer, Tek Steel Ltd THE CHALLENGE THE SOLUTION - 2D shop and erection drawings
    [Show full text]
  • RHOSSANA L. HERRERA 1951 H Campillo St
    RHOSSANA L. HERRERA 1951 H Campillo St. Malate Manila Philippines Cellphone No. : 09288726980 [email protected] CARREER OBJECTIVES: ! To be able to enhance my knowledge and skills in the fields of engineering. ! To be associated with an organization that will provide an assured career growth and maximum professional development. QUALIFICATION: ! Six years experience as AutoCAD Drafter & Structural Steel detailer for companies that caters local and foreign customers. JOB EXPERIENCE: Structural Steel Detailer/3D Modeller November 21, 2011 – Present Sinclair Knight Merz Phil. Inc 24/F Tycoon Center Pearl Drive, Ortigas Center, Pasig City 1605, Philippines Job Description " Perform structural drawings from written descriptions, sketches, and verbal instructions for various material handling (i.e., conveyors, tanks, transfer stations, screen house, etc.) related projects. " Work closely with the steel detailing team in custom layouts, fabrication and erection drawings for various steel detailing projects. " Draws details on AutoCAD and PRO-STEEL and MicroStation PROSTEEL environment using latest version. " Works with clients and company standards, submit all drawings with quality and on time. " Ensure that the drawing guidelines and procedure set by clients and company standards are complied. Structural AutoCAD DETAILER February 22, 2010 – August 10, 2011 SY^2 + Associates Inc. (former Aromin Sy + Associates Inc.) Unit 504 Pryce Center, corner Bagtikan st. Chino Roces Avenue, Makati City, Philippines Job Description " Perform structural CADD drawing of various structures for high rise building f or offices, commercials, residential, institutional, industrial and port/marine p rojects using concrete and/or structural steel.draw/revise plan drawings base d on the site condition as per architect comment or the designers.drawing to ensure latest design or approved drawings are issued.
    [Show full text]
  • Connected Construction
    CONNECTED CONSTRUCTION: REDEFINING THE BUILT WORLD THROUGH COLLABORATION 4 JIM LYNCH 8 NICOLAS MANGON Why Using Big Data Mitigates GIS and BIM Integration Will Risk and Helps Construction Transform Infrastructure Design Businesses Take Flight and Construction RICHARDSON STEEL AND STEEL 13 CANNONDESIGN 18 DETAILING ONLINE 22 SKANSKA SWEDEN 5 Ways Digitalization Fosters 4 Tips From Steel Fabricators to Construction Giant Skanska a Collaborative Culture Bridge the Design-Construction Sweden Has Big Plans to Go in Architecture Gap Completely Digital by 2023 26 BAM IRELAND 30 LMN How Lean Construction Methods 4 Ways Architects Can Extend Their Gave BAM Ireland Its Day in Cork Client Services Post-Construction CONNECTED CONSTRUCTION: REDEFINING THE BUILT WORLD THROUGH COLLABORATION I n t r o d u c t i o n The architecture, engineering, and construction (AEC) In these pages, Autodesk executives and industry experts industry has traditionally been anything but connected. from various disciplines describe how connected data If you work in the industry, you’re all too familiar with the and next-generation construction technology improve impact of disconnected processes and data. Today, most collaboration, reduce risk, and deliver projects faster. construction sites suffer from a lack of communication Leading construction firms are featured, as well: Learn how and collaboration between the numerous teams involved. collaborative planning processes and tools helped BAM Contractors and trade specialists often find themselves Ireland bring together all disciplines on a large project. working with outdated data and plans that are rife with And read about how Skanska Sweden is implementing an errors and omissions. That’s because between every phase ambitious plan for an all-digital future.
    [Show full text]
  • Marketplace to Advertise, Call 231.228.2274 Or E-Mail [email protected] the Northwest’S Premier Rolling House ENGINEERED BUILDING PRODUCTS, INC
    marketplace To advertise, call 231.228.2274 or e-mail [email protected] The Northwest’s Premier Rolling House ENGINEERED BUILDING PRODUCTS, INC. • Plate • Structural Profiles Now accepting fabrication orders for the following: • Architectural Shapes • Rolling • Forming • Fabrication • Clip Angles (2 x 2 x ¼ to 6 x 6 x ½) MARKS METAL TECHNOLOGY • Shear Tabs (up to ½” x 6” FB) 10300 SE Jennifer, Clackamas, OR 97015 • Base Plates [email protected] • Cap Plates www.marksmetal.com 800.526.1031 • Leveling Plates WE BRING METAL TO LIFE • Plasma Cutting Computerized Structural Steel Detailing Quick Turnarounds • Competetive Rates • Superior Quality Service Experienced Staff including licensed Professional Engineers Give us the opportunity to show you what we can do! with many years of detailing experience. 35 years of service to steel fabricators and contractors. Engineered Building Products, Inc. Software: ACAD, Steel-Logic, Xsteel Bloomfield, CT 06002 Gress Corporation 815 West Chester Pike, Contacts: Rich DeMorais, [email protected] West Chester, PA 19382 Richard McDougall, [email protected] Ph: (610) 918-3817 Fax: (610) 918-3819 E-mail: [email protected] (P) 860-243-1110 Estimator: Eric Gress, ext. 103 www.gresscorp.com (F) 860-243-1834 Glenn Ihde & Company Structural Steel Detailing WINBUILD AUTOMATIC STRUCTURE Tekla Structures 3D Modeling Services DESIGN WITH INTEGRATED RSMeans FORMAT QPP Firm – Professional Engineer and NISD Certified Detailers on Staff DATA BASE DISPLAYS COST, REVENUE and Competitive Rates – Quick Turnarounds – All Sizes and Types of Projects Fabrication Equipment Control Data – Electronic Drawing File Transfers RETURN-ON-INVESTMENT. NOW QUALIFY NEW Staffing to Meet Project Requirements – AISC & NISD Member 1732 Bonner Street, McKinney, Texas 75069 COMMERCIAL BUILDING PROSPECTS IN MINUTES.
    [Show full text]
  • Enabling Engineers to Construct and Integrate Geometric Views to Generate an Evolving Project Model
    CIFECENTER FOR INTEGRATED FACILITY ENGINEERING The Perspective Approach: Enabling Engineers to Construct and Integrate Geometric Views to Generate an Evolving Project Model By John Haymaker, Benjamin Suter, Martin Fischer, and John Kunz CIFE Working Paper #WP081 November 2003 STANFORD UNIVERSITY COPYRIGHT © 2003 BY Center for Integrated Facility Engineering If you would like to contact the authors, please write to: c/o CIFE, Civil and Environmental Engineering Dept., Stanford University Terman Engineering Center Mail Code: 4020 Stanford, CA 94305-4020 THE PERSPECTIVE APPROACH: ENABLING ENGINEERS TO CONSTRUCT AND INTEGRATE GEOMETRIC VIEWS AND GENERATE AN EVOLVING PROJECT MODEL JOHN HAYMAKER, BEN SUTER, MARTIN FISCHER, JOHN KUNZ Stanford University, Department of Civil and Environmental Engineering Center for Integrated Facility Engineering, Building 550, Room 553H, Stanford, CA 94305 [email protected], [email protected], [email protected], [email protected] Abstract Enabling engineers to construct integrated and task-specific views of an evolving AEC project is an important and unresolved issue in both practice and research. Many current project-modeling approaches construct and integrate a predefined central model from which task-specific views are constructed. Others construct and integrate a “federation” of predefined task-specific views. AEC processes have been slow to adopt these approaches. This paper formalizes the Perspective Approach, in which engineers from multiple disciplines iteratively construct geometric engineering
    [Show full text]
  • Delivering a New Perspective
    Autodesk Customer Success Story Steel Detailing Online, Inc. COMPANY Steel Detailing Online, Inc. Delivering a new perspective LOCATION Colorado, United States Advance Steel helps a steel detailer deliver SOFTWARE Autodesk® Advance Steel Autodesk® AutoCAD® more value to his clients Advance Steel helps me work out the constructability of a design, and gives me that other set of eyes when I’m rechecking complex spatial geometry. — Bart Rohal Founder and President Steel Detailing Online, Inc. Image courtesy of SDO INC. The firm In addition, as the popularity of Building Information Modeling (BIM) grows, more of Founded in 2002, the Colorado-based company Rohal’s clients are asking him to support BIM Steel Detailing Online provides structural steel workflows, thereby enabling the client to bid detailing to steel fabricators, steel erectors, on those projects. Although BIM projects are contractors, engineers, and architects. All currently a small percentage of his work, it is work is performed in-house by the company’s obvious to Rohal that BIM capabilities will become founder and president, Bart Rohal, whose steel a more common requirement, as will requests detailing career started in 1980. After progressing for the delivery of CNC files for fabrication. from Smoley’s Tables and drafting arms to 2D AutoCAD® software in the late ‘80s, Rohal made another big transition in 2010—adopting The solution Autodesk® Advance Steel software and 3D modeling for his steel detailing and checking. In 2011, Rohal began using 3D modeling in the form of Advance Steel software for detailing and checking. The software enables him to The challenges automatically generate traditional project “A lot of my projects are commercial buildings, deliverables such as shop drawings and erection which tend to be more complex due to the tight plans, as well as CNC files and material lists as constraints caused by all the building disciplines needed, directly from the Advance Steel model.
    [Show full text]
  • Building Information Models by Brasuell.Indd
    Get on the Fast Track in technology Structural Design The Evolution of an Automated Engineering Process By Dale E. Brasuell, P.E., S.E. When a large multi-national corporation pier concrete foundation. The interior struc- sign requirements, fi t within the budget, and found themselves with design and budget ture was dictated by process considerations, meet the required deadline for completion. problems on a large industrial project, and was a complex and non-repetitive layout After the review, Nabholtz Construction Burrough — Brasuell Corporation was with no similarities between any two bays or of Conway, Arkansas was engaged as the contacted because of their unique approach levels. In addition, the facility was to be erected contractor and with Burrough – Brasuell to structural engineering projects. Burrough next to an existing facility and space for Corporation undertook to provide a Design- - Brasuell Corporation (BBC) is a structural erection and storage was at a premium. Build proposal. engineering fi rm that specializes in forensic Finally, the process equipment had to be Beginning in May of 2004, Dale Brasuell engineering and large industrial commercial installed into the structure as an integral part of BBC began preliminary design by creating facility design. of the erection process. a 3D model of the proposed structure,© draw- Structural engineers have many softwareCopyright The workfl ow for a typical project of this ing lines and 3D faces in AutoCAD and choices, but the key to effi ciency and speed type is: assigning member or plate element proper- is that project information is only entered • Initial concept drawings and ties to them through the Interface program.
    [Show full text]
  • Steel Detailer Competency Profile
    Apprenticeship and Industry Training Steel Detailer Competency Profile 20416 (2016) Classification: Public ALBERTA INNOVATION AND ADVANCED EDUCATION CATALOGUING IN PUBLICATION DATA Alberta. Alberta Innovation and Advanced Education. Apprenticeship and Industry Training. Alberta steel detailer program : competency profile. ISBN 978-1-4601-2538-0 (PDF) ALL RIGHTS RESERVED: © 2016, Her Majesty the Queen in right of the Province of Alberta, as represented by the Minister of Advanced Education, 10th floor, Commerce Place, Edmonton, Alberta, Canada, T5J 4L5. All rights reserved. No part of this material may be reproduced in any form or by any means, without the prior written consent of the Minister of Advanced Education Province of Alberta, Canada. Classification: Public STEEL DETAILER Table of Contents STEEL DETAILER Table of Contents ........................................................................................................................................ 1 Apprenticeship and Inustry Training System .......................................................................................................................... 2 Occupational Committee ........................................................................................................................................................... 2 Alberta Apprenticeship and Industry Traiing Board (Board) ................................................................................................. 3 Safety Education .......................................................................................................................................................................
    [Show full text]