Connecting Delphi XM Skyfi to Your Vehicle with an FM Modulator

Radio to the power of X™ Connecting Delphi XM SKYFi to Your Vehicle With an FM To vehicle To ground + To vehicle Modulator audio/stereo - (red) (black) 12V power (female) terminal Note: Connect FM modulator ground terminal to vehicle ground before making any

12V DC other connections. IN + SKYFi Universal Adaptor (male) (red) 6V DC

FM Modulator OUT DELPHI SA 10003 RADIO TO FM Connect the red (+) lead to the vehicle MADE IN MALAYSIA

88.1MHZ AUDIO 12V power terminal, which is powered IN 87.9MHZ 88.5MHZ TO FM ANTENNA when the ignition is in the accessory position.

Frequency switch The 12V power connecting cord is SKYFi Car Cradle Audio In ™ XM Antenna permanently connected for SKYFi FM To vehicle modulation. AM/FM antenna 6V DC In

The SKYFi name, XM name, and related logos are trademarks of XM Satellite Radio Inc. Turning on the FM Modulator Changing the Transmitting Frequency Installation Note: The FM antenna connector used to connect the FM modulator to the With ignition in the accessory position, this FM The FM modulator allows you to change the XM audio/stereo system may require an additional modulator is always on in a standby condition. Satellite Radio broadcast signal to an FM adaptor. Some audio/stereo systems have AM When you turn on your SKYFi Receiver, the FM frequency and output the sound to your vehicle antennas that require an active bias from your modulator will automatically switch the vehicle radio via an FM station. You may experience vehicle’s audio/stereo system. If AM reception is stereo input from your FM antenna to an XM® some interference if a local FM station is broad- not restored, try a different adaptor that will allow Satellite Radio signal. casting at the same frequency. If this occurs, the active bias to reach the AM antenna. change your FM modulator frequency using the Professional installation is recommended. switch on the side of the unit. The switch has three frequency settings: 87.9MHz, 88.1MHz, and 88.5MHz. Note: Reset the vehicle stereo frequency to the same value as the FM modulator frequency.