DOCSLIB.ORG

RSA5100B Series Real-Time Signal Analyzers Printable Help

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
RSA5100B Series Real-Time Signal Analyzers Printable Help xx RSA5100B Series Real-Time Signal Analyzers ZZZ Printable Help *P077089900* 077-0899-00 RSA5100B Series Real-Time Signal Analyzers ZZZ Printable Help www.tektronix.com 077-0899-00 Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. Planar Crown is a registered trademark of Aeroflex Inc. Instrument help part number: 076-0339-00 Contacting Tektronix Tektronix, Inc. 14150 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA For product information, sales, service, and technical support: In North America, call 1-800-833-9200. Worldwide, visit www.tektronix.com to find contacts in your area. Table of Contents Table of Contents Welcome Welcome............................................................................................................. 1 About Tektronix Analyzer Product Software ................................................................................................... 3 Accessories StandardAccessories.......................................................................................... 3 Options Options.......................................................................................................... 5 Documentation and Support Documentation................................................................................................. 5 Video Tutorials................................................................................................. 6 Orientation Front Panel Connectors............................................................................................ 9 Front-Panel Controls............................................................................................... 9 Touch Screen....................................................................................................... 13 Touch-ScreenActions............................................................................................. 13 ElementsoftheDisplay........................................................................................... 15 Rear-Panel Connectors............................................................................................ 19 Setting Up Network Connections................................................................................ 19 Operating Your Instrument Restoring Default Settings........................................................................................ 21 Running Alignments .............................................................................................. 21 Presets............................................................................................................... 22 Setting Options..................................................................................................... 28 OperatingSystem Restore........................................................................................ 31 Using the Measurement Displays Selecting Displays................................................................................................. 33 Taking Measurements Measurements Available Measurements..................................................................................... 35 General Signal Viewing Overview ........................................................................................................... 43 RSA5100B Series Printable Help i Table of Contents DPX DPX Primer ................................................................................................... 43 DPX Display Overview...................................................................................... 65 DPX Display .................................................................................................. 65 DPX Settings.................................................................................................. 74 Time Overview TimeOverviewDisplay...................................................................................... 89 TimeOverviewSettings ..................................................................................... 91 Spectrum Spectrum Display............................................................................................. 94 Spectrum Settings............................................................................................. 96 Spectrogram Spectrogram Display......................................................................................... 97 Spectrogram Settings....................................................................................... 100 Amplitude Vs Time Amplitude Vs Time Display............................................................................... 104 Amplitude Vs Time Settings .............................................................................. 105 Frequency Vs Time FrequencyVsTime Display............................................................................... 106 Frequency Vs Time Settings............................................................................... 107 Phase Vs Time PhaseVs Time Display..................................................................................... 108 Phase Vs Time Settings .................................................................................... 109 RF I & Q Vs Time RFI & Q vsTime Display................................................................................. 110 RFI&QvsTimeSettings................................................................................. 111 Common Controls for General Signal Viewing Displays General Signal Viewing Shared Measurement Settings ................................................ 112 Analog Modulation Overview ......................................................................................................... 125 AM AM Display ................................................................................................. 125 AMSettings................................................................................................. 126 FM FM Display.................................................................................................. 131 FM Settings.................................................................................................. 133 PM PM Display.................................................................................................. 139 PM Settings.................................................................................................. 141 ii RSA5100B Series Printable Help Table of Contents RF Measurements Overview ......................................................................................................... 149 Channel Power and ACPR Channel Power and ACPR (Adjacent Channel Power Ratio) Display................................ 149 Channel Power and ACPR Settings ...................................................................... 152 MCPR MCPR (Multiple Carrier Power Ratio) Display......................................................... 155 MCPR Settings.............................................................................................. 158 Occupied BW & x dB BW Occupied BW & x dB BW Display....................................................................... 163 Occupied BW & x dB BW Settings ...................................................................... 166 Spurious SpuriousDisplay............................................................................................ 167 Spurious Display Settings.................................................................................. 171 CCDF CCDFDisplay............................................................................................... 178 CCDF Settings .............................................................................................. 179 Phase Noise PhaseNoise Display........................................................................................ 180 Phase Noise Settings ....................................................................................... 185 Settling Time Measurements Settling Time Measurement Overview ................................................................... 187 Settling Time Displays Settling Time Displays ..................................................................................... 191 Settling Time Settings ...................................................................................... 199 Common Controls for Settling Time Displays Settling Time Displays Shared Measurement Settings ................................................. 199 SEM (Spectrum Emission Mask) SEMDisplay................................................................................................ 207 Spectrum Emission Mask Settings........................................................................ 210 Common Controls for RF Measurements Displays RF Measurements Shared Measurement Settings....................................................... 217 WLAN Measurements WLAN Overview................................................................................................ 225 WLAN Chan Response WLAN Channel Response Display......................................................................
Load more

Recommended publications
  • Digital TV Signal Analyzer 1750
    Digital TV signal analyzer 1750 USER MANUAL ©Copyright 2011, Telemann No part of this document may be copied or replaced without the written consent of Telemann Corporation. Any content in this document is subject to change without notice. Table of Contents CHAPTER01.GETTING STARTED 1. FEATURES (1) 1750 enables user to measure the followings 6 (2) Portable digital TV signal analyzer 7 (3) The contents of this manual will describe the care and operation of 1750 7 2. SAFETY INSTRUCTIONS (1) GENERAL 8 (2) CIRCUMSTANCES 8 (3) INSTALLATION 8 (4) BATTERY CHARGE 9 (5) MAINTENANCE 9 3. UNIT OVERVIEW (1) FRONT VIEW 10 (2) BACK VIEW 11 (3) BOTTOM VIEW 11 (4) KEYPAD - EACH BUTTON’S NAME AND FUNCTION. 12 4. PREPARATION & INSTALLATION (1) INSTALLATIONS 14 (2) CHARGING BATTERY 16 (3) CABLE SPECIFICATIONS 17 CHAPTER02. SPECIFICATIONS 1. SIGNAL LEVEL MEASUREMENTS (1) C/N & MER/BER 23 (2) CHANNEL LEVEL 24 (3) CONSTELLATION 26 (4) CTB/CSO 28 (5) ANTENNA FOCUS 29 (6) DATA LOGGER 30 3 Digital TV signal analyzer 1750 2. SPECTRUM MEASUREMENTS (1) CHANNEL SWEEP 34 (2) FREQUENCY SPECTRUM 35 (3) TILT SWEEP 37 (4) REVERSE NOISE 38 (5) UPSTREAM SIGNAL GENERATOR - OPTION 38 3. SCAN (AUTO SEARCH) (1) FEATURES 42 (2) SCAN MODE 42 4. CHANNEL PLAN (1) CHANNEL PLAN 46 (2) CHANNEL CONFIG 47 (3) COMMON OPERATIONS 48 5. SUB-FUNCTIONS (1) COMMON OPERATIONS 52 (2) SUB-FUNCTIONS 57 6. SYSTEM CONFIGURATION (1) LANGUAGE 68 (2) CABLE LOSS 68 (3) AUTO TIMEOUT 68 (4) VIDEO SYNC 69 (5) CONSTELLATION 69 (6) CHANNEL EDIT 69 (7) LCD CONTRAST 69 (8) COMPANY & USER NAME 70 CHAPTER03.
    [Show full text]
  • HP 71400 Lightwave Signal Analyzer Application Note 371
    HP 71400 Lightwave Signal Analyzer Application Note 371 Measuring Modulated Light 2 Table of Contents Page Introduction 3 Chapter I. Generating, Detecting, and Displaying Modulated Light 4 Generating Modulated Light 4 Intensity Modulation Detection and Display 6 Intensity Noise Measurements 8 Relative Intensity Noise 11 Frequency Modulated Light 12 References 16 Chapter II. Using the Lightwave Signal Analyzer 17 System Description 17 Operation 18 Electrical Calibration 18 Connector Cleaning 18 Main Menu 19 User-Defined Menu 19 Operating Modes 20 Lightwave Modes 20 Bypass the Lightwave Input 21 Measurement Example 21 Chapter III. HP 71400C Measurement Examples 24 Modulated Laser Power 25 Detected Electrical Power 26 Low-level Signals 27 Relative Intensity Noise (RIN Lasr) 28 Relative Intensity Noise (RIN SYS) 30 Cable Reflections and Noise 31 Modulation Linearity of Laser Diode 32 Pulsed Laser Modulation Spectrum 33 PRBS Digital Modulation Spectrum 34 Frequency Response and Intensity Noise 35 Frequency Response with Tracking Generator 36 Linewidth of DFB Laser Diode 38 Chirp of a Modulated DFB Laser 40 FM Power Spectrum of a DFB Laser 41 Optical Heterodyne YAG Laser Spectrum 42 Photoreceiver Frequency Response 43 3 Introduction Modern fiber-optic communication systems need to modulate information onto infrared light. This allows propagation through optical fibers with the greatest possible fidelity. The quest for faster information transfer rates and greater propagation distances, as well as the development of microwave-frequency analog-modulated systems, has driven development toward the use of single-mode fibers. These fibers propagate light at wavelengths of 1300 and 1550 nanometers.* The sources and detectors of modulated light are key components in such systems.
    [Show full text]
  • 1. Comparison of a SETAC with the SFERT
    A NOTE FROM THE ITU LIBRARY & ARCHIVES SERVICE An erratum for this volume was issued for the French version of this publication. For reference purposes, it has been included with this PDF. This electronic version (PDF) was scanned by the International Telecommunication Union (ITU) Library & Archives Service from an original paper document in the ITU Library & Archives collections. La présente version électronique (PDF) a été numérisée par le Service de la bibliothèque et des archives de l'Union internationale des télécommunications (UIT) à partir d'un document papier original des collections de ce service. Esta versión electrónica (PDF) ha sido escaneada por el Servicio de Biblioteca y Archivos de la Unión Internacional de Telecomunicaciones (UIT) a partir de un documento impreso original de las colecciones del Servicio de Biblioteca y Archivos de la UIT. ﻫﺬﻩ ﺍﻟﻨﺴﺨﺔ ﺍﻹﻟﻜﺘﺮﻭﻧﻴﺔ (PDF) ﻧﺘﺎﺝ ﺗﺼﻮﻳﺮ ﺑﺎﻟﻤﺴﺢ ﺍﻟﻀﻮﺋﻲ ﺃﺟﺮﺍﻩ ﻗﺴﻢ ﺍﻟﻤﻜﺘﺒﺔ ﻭﺍﻟﻤﺤﻔﻮﻇﺎﺕ ﻓﻲ ﺍﻻﺗﺤﺎﺩ ﺍﻟﺪﻭﻟﻲ ﻟﻼﺗﺼﺎﻻﺕ (ITU) ﻧﻘﻼ ﻣﻦ ﻭﺛﻴﻘﺔ ﻭﺭﻗﻴﺔ ﺃﺻﻠﻴﺔ ﺿﻤﻦ ﺍﻟﻮﺛﺎﺋﻖ ﺍﻟﻤﺘﻮﻓﺮﺓ ﻓﻲ ﻗﺴﻢ ﺍﻟﻤﻜﺘﺒﺔ ﻭﺍﻟﻤﺤﻔﻮﻇﺎﺕ. ً 此电子版（PDF版本）由国际电信联盟（ITU）图书馆和档案室利用存于该处的纸质文件扫描提供。 Настоящий электронный вариант (PDF) был подготовлен в библиотечно-архивной службе Международного союза электросвязи путем сканирования исходного документа в бумажной форме из библиотечно-архивной службы МСЭ. © International Telecommunication Union COMITE CONSULTATIF INTERNATIONAL TELEPHONIQUE (C.C.I.F.) Xth PLENARY MEETING Budapest, 3rd— 10th September, 1934 VOLUME IV Transmission: Standards ; Methods and Apparatus for Measurements; Maintenance. English Edition. Issued by the International Standard Electric Corporation, London, 193b ERRATA DU TOME IV du Compte rendu de la Xu Assemblée plénière du C. C. I. F. Page 3, 5e ligne après le titre, lire téléphonique.
    [Show full text]
  • ETR 273-1-1 TECHNICAL February 1998 REPORT
    ETSI ETR 273-1-1 TECHNICAL February 1998 REPORT Source: ERM Reference: DTR/ERM-RP01-018-1-1 ICS: 33.020 Key words: Analogue, data, measurement uncertainty, mobile, radio, testing Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 1: Introduction ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: F-06921 Sophia-Antipolis CEDEX - FRANCE Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [email protected] Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16 Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 1998. All rights reserved. Page 2 ETR 273-1-1: February 1998 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to "ETSI Editing and Committee Support Dept." at the address shown on the title page. Page 3 ETR 273-1-1: February 1998 Contents Foreword ...........................................................................................................................................9
    [Show full text]
  • EDU33210 Series 20 Mhz Function/Arbitrary Waveform
    EDU33210 Series 20 MHz Function / Arbitrary Waveform Generators Find us at www.keysight.com Page 1 EDU33210 Series Function / Arbitrary Waveform Generators The Keysight EDU33210 Series function / arbitrary waveform generators offer the standard signals and features you expect — such as modulation, sweep, and burst. It also provides features that give you the capabilities and flexibility you need to get your job done quickly, no matter how complex. An intuitive, information-packed front-panel interface enables you to easily recall where you left off when your attention is focused elsewhere. And that is just the beginning. Features • Use the signature 7-inch color display for a simultaneous parameter set up, signal viewing, and editing. • Get six built-in modulation types and 17 popular waveforms to simulate typical applications for testing. • Acquire 16-bit arbitrary waveform capability with memory up to 8 M samples per channel. • Begin using the USB and LAN IO interface for remote connectivity. • Receive Keysight's PathWave BenchVue software to enable PC control. Keysight EDU33211A Keysight EDU33212A 20 MHz, single-channel function/arbitrary waveform 20 MHz, dual-channel function/arbitrary waveform generator generator Find us at www.keysight.com Page 2 Simple set up and operation The 7-inch wide video graphics array (WVGA) color display gives you both the waveform setting and other parameters in one view. The EDU33212A 20 MHz dual-channel function / arbitrary waveform generator can simultaneously display both channels' waveform information. Color-coded keypads along with display and output connectors help you prevent set up and connection errors. The EDU33210 Series 20 MHz function / arbitrary waveform generators ship standard with USB and LAN connectivity, making it easy for remote access and control.
    [Show full text]
  • Keysight 35670A Dynamic Signal Analyzer
    Keysight 35670A Dynamic Signal Analyzer Versatile two- or four-channel high-performance FFT-based spectrum/network analyzer 122 μHz to 102.4 kHz 16-bit ADC Technical Overview 02 | Keysight | 35670A Dynamic Signal Analyzer - Technical Overview The Keysight Technologies, Inc. Versatile enough to be Key Specifications 35670A is a portable two- or four-channel dynamic signal analyzer your only instrument Frequency 102.4 kHz 1 channel with the ver sa til i ty to be several for low fre quen cy range: 51.2 kHz 2 channel instruments at once. Rugged and 25.6 kHz 4 channel portable, it’s ideal for field work. analysis Dynamic 90 dB typical Yet it has the per for mance and range: func tion al ity required for demanding With the 35670A, you carry several Accuracy: ±0.15 dB R&D applications. Optional features instruments into the field in one Channel ±0.04 dB and ±0.5 optimize the instrument for trou- package. Fre quen cy, time, and match: degrees ble shoot ing mechanical vibration amplitude domain analysis are all Real-time 25.6 kHz/1 channel and noise problems, characterizing avail able in the standard in stru ment. bandwidth: control systems, or general spectrum Build on Resolution: 100, 200, 400 & and network analysis. that capability with options that ei- 800 lines ther add new measurement capability Time > 6 Msamples or enhance all mea sure ment modes. capture: Take the Keysight AY6 Add two chan nels (four total) Source Random, burst 35670A 1D0 Computed order tracking types: random, periodic 1D1 Real-time octave chirp, burst chirp, where it’s needed! measurements pink noise, sine, UK4 Microphone adapter and swept-sine Whether you’re moving an in stru ment power supply (Option 1D2), around the world or around the lab, 1D2 Swept-sine mea sure ments arbitrary (Option portability is a real benefit.
    [Show full text]
  • Signal Analyzer MS2830A Brochure
    Product Brochure Signal Analyzer MS2830A MS2830A-040: 9 kHz to 3.6 GHz MS2830A-041: 9 kHz to 6 GHz MS2830A-043: 9 kHz to 13.5 GHz « MS2830A-044: 9 kHz to 26.5 GHz* » « MS2830A-045: 9 kHz to 43 GHz* » *: See catalog for MS2830A-044/045. Signal Analyzer MS2830A The MS2830A is a high-speed, high-performance, cost-effective Spectrum Analyzer/Signal Analyzer. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains. Behavior in the time domain that cannot be handled by a sweep type spectrum analyzer can be checked in the frequency domain. A wide frequency can be analyzed using sweep type spectrum analysis functions while detailed signal analysis of a specific frequency band is supported too. Moreover, the built-in signal generator function outputs both continuous wave (CW) and modulated signals for use as a reference signal source when testing Tx characteristics of parts and as a signal source for evaluating Rx characteristics. Frequency option MS2830A-040 MS2830A-041 MS2830A-043 MS2830A-044*1 MS2830A-045*1 Frequency range 9 kHz to 3.6 GHz 9 kHz to 6 GHz 9 kHz to 13.5 GHz 9 kHz to 26.5 GHz 9 kHz to 43 GHz ±1 × 10–7/day (Standard) Aging rate ±1 × 10–8/day (MS2830A-002) ±1 × 10–8/day (Standard) ±1 × 10–10/month (MS2830A-001/037) ±1 × 10–10/month (MS2830A-001/037) 5 minutes, ±5 × 10–7 (Standard) 5 minutes, ±5 × 10–8 (MS2830A-002) 5 minutes, ±5 × 10–8 (Standard) Start time/Characteristics 7 minutes, ±1 × 10–9 (MS2830A-001) 7 minutes, ±1 × 10–9 (MS2830A-001) 15 minutes,
    [Show full text]
  • Performance Verification Guide DSG800 Series RF Signal Generator
    RIGOL Performance Verification Guide DSG800 Series RF Signal Generator Aug. 2015 RIGOL Technologies, Inc. RIGOL Guaranty and Declaration Copyright © 2015 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information RIGOL is a registered trademark of RIGOL Technologies, Inc. Publication Number PVG02100-1110 Notices RIGOL products are covered by P.R.C. and foreign patents, issued and pending. RIGOL reserves the right to modify or change parts of or all the specifications and pricing policies at company’s sole decision. Information in this publication replaces all previously corresponding material. Information in this publication is subject to change without notice. RIGOL shall not be liable for either incidental or consequential losses in connection with the furnishing, use or performance of this manual as well as any information contained. Any part of this document is forbidden to be copied, photocopied or rearranged without prior written approval of RIGOL. Product Certification RIGOL guarantees this product conforms to the national and industrial standards in China as well as the ISO9001:2008 standard and the ISO14001:2004 standard. Other international standard conformance certification is in progress. Contact Us If you have any problem or requirement when using our products or this manual, please contact RIGOL. E-mail: [email protected] Website: www.rigol.com DSG800 Performance Verification Guide I RIGOL General Safety Summary Please review the following safety precautions carefully before putting the instrument into operation so as to avoid any personal injury or damage to the instrument and any product connected to it. To prevent potential hazards, please use the instrument only specified by this manual.
    [Show full text]
  • Signal Analyzer MS2690A/MS2691A/MS2692A Brochure
    Product Brochure Signal Analyzer MS2690A/MS2691A/MS2692A MS2690A: 50 Hz to 6.0 GHz MS2691A: 50 Hz to 13.5 GHz MS2692A: 50 Hz to 26.5 GHz Excellent Eco Product The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the Wireless communications are tending toward use of higher frequencies excellent general level accuracy, dynamic range and performance of a above 3 GHz and wider bandwidths. However, general-purpose high-end spectrum analyzer. Its easy operability and built-in functions spectrum analyzers suffer from a degraded noise floor above 3 GHz due are perfect for tests of Tx characteristics. Not only can it capture to the 3-GHz baseband, so they cannot be used to verify the true wideband signals but FFT technology supports multifunction signal product performance. Because the MS269xA baseband can be analyses in both the time and frequency domains. Behavior in the time extended up to 6 GHz it offers excellent level accuracy and modulation domain that cannot be handled by a sweep type spectrum analyzer can precision at frequencies from 50 Hz to 6 GHz. Adding the full line of be checked in the frequency domain. A wide frequency can be analyzed versatile analysis software options eliminates the need for an external using sweep type spectrum analysis functions while detailed signal PC at wireless modulation analysis. Moreover, installing a preselector analysis of a specific frequency band is supported too. Moreover, the bypass option (MS2692A-067) enables use of the signal analyzer and built-in signal generator function outputs both continuous wave (CW) modulation analysis functions up to 26.5 GHz (MS2692A).
    [Show full text]
  • TINA Lab Datasheet
    TINALab II High Speed Multifunction PC Instrument Details correct at time of going to press. Matrix Multimedia reserves the right to change specification. Copyright © 2009 Matrix Multimedia Limited www.matrixmultimedia.co.uk What does it do? peak to peak. Arbitrary waveforms can be programmed via the high level, easy to use language of TINA's Interpreter. With TINALab II you can turn your laptop or desktop computer into a powerful, Working automatically in conjunction with the multifunction test and measurement Function Generator, the Signal Analyzer instrument. measures and displays Bode amplitude and phase diagrams, Nyquist diagrams, and also Whichever instrument you need multimeter, works as Spectrum Analyzer. oscilloscope, spectrum analyzer, logic analyzer, arbitrary waveform generator, or Digital I/O for the high-tech Digital Signal digital signal generator it is at your fingertips Generator and Logic Analyzer instruments with a click of the mouse. allow fast 16-channel digital testing up to 40MHz. In addition TINALab II can be used with the TINA circuit simulation program for The optional Multimeter for TINALab II allows comparison of simulation and measurements DC/AC measurements in ranges from 1mV to as a unique tool for circuit development, 400V and 100 µA to 2A. It can also measure troubleshooting, and the study of analog and DC resistance in ranges from 1W to 10MW. digital electronics. Using TINALab II with TINA gives you the What does it do? unique capability to have circuit simulation and real time measurements in the same integrated environment. This provides an Features include real time: invaluable tool for troubleshooting and brings • Storage Oscilloscope your designs to life by comparing simulated • Signal Analyzer and measured results.
    [Show full text]
  • Spectrum Analyzers RSA5000 Series Real-Time Signal Analyzers ZZZ Printable Online Help
    xx RSA6000 Series Real-Time Spectrum Analyzers RSA5000 Series Real-Time Signal Analyzers ZZZ Printable Online Help *P077051902* 077-0519-02 RSA6000 Series Real-Time Spectrum Analyzers RSA5000 Series Real-Time Signal Analyzers ZZZ PrintableOnlineHelp www.tektronix.com 077-0519-02 Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. Online help version: 2.6 Contacting Tektronix Tektronix, Inc. 14150 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA For product information, sales, service, and technical support: In North America, call 1-800-833-9200. Worldwide, visit www.tektronix.com to find contacts in your area. Table of Contents Table of Contents Welcome Welcome............................................................................................................. 1 About Tektronix Analyzers Your TektronixAnalyzer........................................................................................... 3 Product Software ................................................................................................... 4 Accessories StandardAccessories.........................................................................................
    [Show full text]
  • Service Center Central and Eastern Europe List of Serviced Instruments / Third Party Manufactured Instruments (Valid from March 2013)
    Service Center Central and Eastern Europe List of Serviced Instruments / Third Party Manufactured Instruments (Valid from March 2013) Third Party Manufactured Instruments Third Party Manufactured Instruments Manufacture Type Designation Manufacture Type Designation 2224,2 Power Supply Statron 45 Fluke Multimeter Fluke 6113 Comm Tester Racal 53081A Universal Counter Agilent 112 Fluke Multimeter 4 1/4 Fluke 53131A Universal Counter 225 MHz Agilent 1604 TTi Multimeter TTi 4 1/4 53132A Universal Counter 225 MHz Agilent 12 digits 175 Fluke Multimeter 4 1/4 Fluke 1000V Hz, C 53181A Universal Counter 12.4 GHz Agilent 189 Fluke Multimeter 4 1/4 Fluke 54520A Oscilloscope Agilent Infinium 2000 Keithley Multimeter 54600B Oscilloscope 2015 Keithley Multimeter Keithley 6 1/2 54601A Oscilloscope 100 MHz 2306 Keithley Battery Charger Simulator 54610B Oscilloscope 500 MHz HP 2400 Keithley Sourcemeter Powers + Multim 6 1/2 dig 54616B Oscilloscope 500 MHz HP 2602 Keithley Sourcemeter Powers + Multim 6 1/2 dig 54831B Oscilloscope 600 MHz Agilent Infinium 2620A Multimeter Hydra II Fluke 54832D Oscilloscope 1 GHz 4+16 Channels Agilent Infinium 2750 Keithley Multimeter/Switch Keithley 6 1/2 6022A Power Supply 33120A Function/Arbitary Waveform Generator 15 MHz HP 6032A Power Supply 0 – 60V/0 – 50A HP 33220A Function Generator 6038A Power Supply 0 – 60V/0 – 10A HP 33250A Function/Arbitary Waveform Generator 80 MHz HP 6050A Electronic Load Agilent DC 33522A Function/Arbitary Waveform Generator 80 MHz HP 6247B Power Supply HP 60V 15A 34401A Multimeter HP 6554A
    [Show full text]