DOCSLIB.ORG

Welding & Metalworking Products Promotion!

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Welding & Metalworking Products Promotion! WELDING & METALWORKING PRODUCTS PROMOTION! AIRMAX PAPR CLASSIC STYLE PORT-A-TORCH® OUTFIT • Offers affordable protection from harmful contaminants while you weld • Components are industrial-grade for professional use • Features a W40 series variable A D F, • Cutting attachments feature solid forged heads, adjustable shade 9-13 with light shade 4 triangular stainless steel tubes, solid brass • Flame resistant face seal and breathing hose protect against sparks forged levers and a lock ring • Lightweight blower unit mounts on an adjustable belt • Stored in a heav y-dut y, weather-proof • Audible alarm signals when battery and flame-retardant tool bag charge or new filter is required • Includes: Welding tip (23A90-3), • NIOSH approved HE filtration fuel gas regulator (601-15-200), from particulate contaminants oxygen regulator (601-80-540), torch handle (85), cutting attachment (72-3), mixer (D-85), cutting tip (6290-1AC), 3/16" x 12' hose, 20 cu. ft. oxygen cylinder, 10 cu. ft. "MC" acetylene cylinder, cylinder wrench, goggles, striker and instruction manual Model MFG Promo Model MFG Promo No. No. Price No. No. Price SED529 12993 599.95 TTU624 4403211 595.00 AIR-ACETYLENE FEATHER AIR-ACETYLENE TARGET TORCHTM KITS FLAME® TORCH KIT • Hot turbine flame • Interchangeable snap-in tips • Feather brush flame • For professional soldering • Interchangeable screw-in tip and brazing applications • Includes: Heavy-duty torch, • Includes: Heavy-duty torch, UL listed brass regulator, UL listed brass regulator, handle, lighter, wrench, quick-disconnect handle, tip and 12' hose tips and 12' hose 330-1777 330-1663 Model MFG Tip Reg. Promo Model MFG Tip Reg. Promo No. No. No. FTG Price No. No. No. FTG Price 330-1780 KX-7B GA-8 B Cylinder 235.00 330-1663 KA-1H BA-3 B Cylinder 145.00 330-1777 KX-3B GA-3, GA-11 B Cylinder 298.00 Pricing in effect until June 28, 2013 or while quantities last. Taxes and freight extra. Issue #SDW5407NA **DUE TO CURRENT MARKET FLUCTUATIONS, PRICES MAY VARY WITHOUT PRIOR NOTICE.** TM ® COMFOFLEX PREMIUM QUALITY MAX FOAM EAR PLUGS WELDERS' GLOVES • Uncorded • Heat and flame resistant • Pre-shaped foam ear plugs shoulder split cowhide leather with a smooth outer skin • Fully sock-lined for added comfort • Packed in poly bags ® stitched welted seams • NRR of 33 dB • Kevlar • 13 1/2" long with reinforced thumb • 200 pairs per box Model MFG Buy 3* boxes No. No. & SAVE! Model Buy 12* pairs No. Size & SAVE! SD630 MAX-1 21.99/Box* 610-0328 Large 6.08/Pr.* Z1500 SERIES SAFETY EYEWEAR SOFTOUCHTM PIGSKIN TIG • Modern design with extended wraparound coverage WELDERS' GLOVES • Scratch-resistant polycarbonate clear lens with UV protection • Seamless index finger construction provides • Ultra soft non-slip nosepiece unobstructed control over small diameter • Distortion-free welding rods and ultra light TIG torches • Compliant with CSA standard Z94.3 • Sewn with DuPont® Kevlar® thread for higher seam strength and seam flame resistance • Extra long 4" split pigskin cuff offers wrist and forearm protection against heat 610-2008M Model Buy 12* pairs Model Buy 12* No. Size & SAVE! No. & SAVE! 610-2008M Medium 8.99/Pr.* SEC955 3.32/Ea.* 610-2008 Large 8.99/Pr.* W60 TRUESIGHT* WELDING HELMET PREMIUM QUALITY GRAIN • Variable shade 5-13 COWHIDE LEATHER GLOVES • LED indicator for weld, torch and grind modes • Superior abrasion resistance • Amber band pass for enhanced • Unlined, full grain cowhide palm clarity of weld puddle • Full split leather 4" gauntlet cuff • No retainer for easy helmet installation and removal • Meets ANSI standard Z 8 7.1 and compliant with CSA standard Z94.3 SI842 Model Buy 12* pairs Model MFG Promo No. Description Size & SAVE! No. No. Price SI842 Split Back Large 4.55/Pr.* SEC603 29371 379.00 SM592 Cowhide Back Large 4.99/Pr.* 2 WELDERS' DOORAGS WELDERS' CAPS NT843 • Athletic mesh lining to allow NT837 • Athletic mesh lining to allow sweat to quickly evaporate sweat to quickly evaporate • Preshrunk and presoftened lightweight fabric, • Preshrunk and presoftened lightweight fabric, flame retardant until washed flame-retardant until washed • Air-cushioned front lining for • Air-cushioned front lining for comfort and sweat absorbency comfort and sweat absorbency • Assorted styles include: Happy Hour, Nautical, • Assorted styles Free Spirit, Safari, Paradise, Camo, Feast and Wild • One size fits all • 12 per package • 12 per package Happy Free Camo Wild Safari Hour Feast Spirit Model Promo No. Size Price ASSORTED STYLES NT838 7 1/8 39.95/Pkg. Model Promo NT839 7 1/4 39.95/Pkg. No. Colour/Style Price NT840 7 3/8 39.95/Pkg. NT835 Camo, Wild, Safari 49.95/Pkg. NT841 7 1/2 39.95/Pkg. NT836 Happy Hour, Feast, Free Spirit 49.95/Pkg. NT842 7 5/8 39.95/Pkg. NT837 Authentic Woodland Camo 49.95/Pkg. CAMO NT843 7 1/8 39.95/Pkg. NT844 7 1/4 39.95/Pkg. NT845 7 3/8 39.95/Pkg. HEADGEAR PADS & SWEATBANDS NT846 7 1/2 39.95/Pkg. • Field-tested to improve helmet grip NT847 7 5/8 39.95/Pkg. • Absorbent air-cushioned layer lined with 10% fleece cotton • Velcro fastening system, fits all major brands of headgear • Flame retardant headgear pads • Two per package W20 860P LEATHER WELDING HELMET • Ideal for use in confined spaces • Tough, pliable, breathable leather covering • Flip-front glass holder, 2" x 4 1/4" • Includes adjustable headgear Sweatband Non-Suspender Headgear Suspender Model MFG Promo Headgear No. No. Price 141-1120 14531 82.50 Model Promo No. Description Price GRAVITY FED EYEWASH 620-3200V Suspender Pads 2.99/Pkg. • 9-gallon high-density green polyethylene tank 620-3100V Non-Suspender Pads 2.99/Pkg. • Supplies a continuous flow of water for 15 minutes at 0.4 GPM SAM548 Sweatbands w/Elastic Strap 2.99/Pkg. • Wide-fill opening with threaded cap • Easy-to-operate yellow activation arm • Light design and mounting bracket included CHILL-ITS® COOLING • Includes one bottle of bacteriostatic additive TOWEL BANDANA • Certified by CSA to meet the • Advanced PVA towel material ANSI standard Z358.1-2009 keeps you cool without the bulk • Activates quickly and easily when soaked in water for 2-5 minutes • Lightweight and low profile SAR314 • Tie closure for a personal fit • One size Model MFG Promo No. No. Description Price Model MFG Promo No. No. Price SAR314 7501 Gravity Fed Eyewash 199.95 SAR315 9082 Bacteriostatic Water Additive, 49.95/Case SEC684 12567 3.49 Four 8-oz. Bottles/Case 3 FLOWMETER HAND CUTTING TORCHES REGULATORS • Solid forged head cuts to 12" • Triangular tube design with brazed connections • Designed for MIG and TIG applications • Equipped with FlashGuard® check valves • Provides accurate regulation of gas flow • Positive pressure E torches for acetylene and alternate fuels • Combination of regulator and • Low pressure F injector torches for maximum performance flowmeter as one unit with alternate fuels such as propane, natural gas, • Flow capacity: 50 SCFH MAPP® gas, and propylene, NOT FOR uSE with acetylene • Inlet gauge: 1 1/2", 4000 PSI • Flowmeter: 60 SCFH • 6' hose included • Conforms to CGA E-4 standard for gas pressure regulators TTT903 331-4150 Model MFG Connection Promo Model MFG Head Promo No. No. Inlet Outlet Price No. No. Angle° Length" Price ARGON POSITIVE PRESSuRE E TORCH 331-4150 191AR-60-6HSP CGA580 5/8"-18 RH (M) 120.00 TTT903 1003440 90 21 350.00 CO2 LOW PRESSuRE F INJECTOR TORCH 331-3200 191CD-60-6HSP CGA320 5/8"-18 RH (F) 125.00 TTT907 1003470 90 21 350.00 FLOW GAUGE REGULATORS STRAIGHT CUTTING 242V TORCH • Designed for MIG and TIG applications • Rugged construction for heavy-duty applications • Body machined from class "A" brass bar stock • Cutting capacity up to 8" • Chrome-plated housing cap • Uses Victor® series 1 tips • Accurate measurement of • Features: Solid brass forged head, triangular stainless steel tubes gas flow up to 50 SCFH with brazed connections, stainless steel cutting oxygen lever, • 2", 4000 PSI inlet gauges non-slip grooves on handle, Flashguard® check valves, positive for easy reading pressure mixer (for acetylene and all other fuel gases) • Outlet connection: • UL listed, meets CGA standard E.5 5/8"-18 RH (F), 0.32" orifice • UL listed Model MFG Max. Inlet/Delivery Inlet Promo No. No. Pressure (PSI) Connection Price ARGON 331-1540 190AR-50 0-50 CGA580 79.50 Model MFG Head Promo No. No. Angle° Price CO2 331-1575 190CD-45 0-45 CGA320 79.50 TTU546 1003569 90 185.00 TM FLAMESHIELD SOLDERING 24-OZ. FIBREGLASS LAVASHIELD & WELDING PAD WELDING BLANKETS • Protects walls, joints and wall studs from burn • General purpose drop cloth for protection against welding spatter damage associated with low-temperature soldering • Black fibreglass coated with neoprene on both sides • A must for every tool box and maintenance truck • Double-locked stitched Kevlar® • 9" x 12", coated fibreglass thread hemmed on all sides • One grommet on each corner • Large brass grommets for extra durability and easy handling • Temperature resistant: 1000°F (538°C) • Heavy-duty vertical curtain protection against sparks, molten metal splash, welding spatter and grinding spray Model Promo No. Dimensions' Price Model MFG Promo NT896 6 x 6 70.75 No. No. Price NT821 6 x 8 95.00 146-1032 912FS 11.95 4 PENCIL FLAME TORCH KIT AUTO-IGNITE HAND TORCH • Solid brass construction • Durable cast iron construction • General purpose utility flame • High output swirl flame • Needle valve control and filtered orifice • Precise flame adjustment • Includes: BV769 torch unit and • CGA600 inlet connection TTu686 14.1-oz. propane cylinder • Use with propane or MAPP® • Replacement tip end available TTu686 BV769 Model MFG Promo No. No. Price TTU690 BZUL100 19.50/Kit Model MFG Promo No.
Load more

Recommended publications
  • Thermodynamics of Titanium Oxide in Ladle Slags
    ISIJ International, Vol. 41 (2001), No. 12, pp. 1447–1453 Thermodynamics of Titanium Oxide in Ladle Slags Sung-Mo JUNG and R. J. FRUEHAN1) Formerly Postdoctoral research associate, at Department of Materials Science and Engineering, Carnegie Mellon University, now at Graduate School of Iron and Steel Technology, Pohang University of Science and Technology, Pohang 790-784, Korea. 1) Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213 USA. (Received on May 17, 2001; accepted in final form on August 27, 2001) It is necessary to have information on the thermodynamic behavior of titanium oxide in ladle type slags in order to control the titanium content in several grades of steel. In the present study, the thermodynamics was determined from the equilibrium between Fe–Csat–Ti and CaO–SiO2-–30%Al2O3–MgO–TiOx slags , in equilibrium with CO and from the equilibrium between Fe–Csat–(16 18)%Cr–Si–Ti and CaO–SiO2– 20%Al2O3–MgO–TiOx slags in equilibrium with CO. From the experiment with Fe–Csat–Ti alloy, the activity coefficients of TiO1.5 and TiO2 vary with basicity from 0.3 to 1.5 and from 0.5 to 2.3, respectively. And from , the experiment with Fe–Csat–(16 18)%Cr–Si–Ti alloy, the activity coefficients of TiO1.5 and TiO2 vary with ba- sicity from 0.4 to 1.4 and from 0.6 to 3.5, respectively. The results obtained from the equilibrium between , Fe–Csat–(16 18)%Cr–Si–Ti and CaO-SiO2–20%Al2O3–MgO–TiOx slags were used to estimate the titanium content of silicon-added stainless steel.
    [Show full text]
  • ARCHIVES of FOUNDRY ENGINEERING Volume 18, Issue 1/2018, 129 - 1 3 4 During Electrolytic Dissolution
    ARCHIVES ISSN (2299-2944) Volume 18 of Issue 1/2018 FOUNDRY ENGINEERING 129 – 134 DOI: 10.24425/118825 24/1 Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences A Study of Inclusions in Aluminum and Titanium Deoxidized 4130 R.B. Tuttle *, S. Kottala Saginaw Valley State University, 209 Pioneer Hall, 7400 Bay Rd., 48710 University Center, United States * Corresponding author. E-mail address: [email protected] Received 02.10.2017; accepted in revised form 14.11.2017 Abstract In this paper, the authors investigated the size distribution of titanium oxide (TiO2), titanium nitride (TiN) and titanium carbide (TiC) inclusions in a titanium deoxidized 4130 steel and compared it with the 4130 base alloy composition inclusions. TiN and TiC inclusions are of particular interest due to their role as heterogeneous nuclei for various phase reactions in steels. Two types of samples were prepared, a polished sample and a filtered sample. Electrolytic dissolution was employed to make the filter paper samples. The size range of titanium inclusions was found to be more than that of the non-metallic inclusions from 4130 base alloy heat. Titanium inclusions from the filter and polished samples were round in shape. TiC and TiN inclusions were not found in the electrolytic extraction samples. Inclusions and their chemistries were analyzed using scanning electron microscope and energy dispersive spectrometer. The inclusion size range was larger for the titanium deoxidized samples than the base alloy. However, in both steels the majority of inclusions had a size smaller than 10 μm. Keywords: Steel, Sand casting, Inclusions, Electrolytic extraction, Inclusion characterization 1.
    [Show full text]
  • Effect of Deoxidation Sequence on Carbon Manganese Steel Weld Metal Microstructures
    Effect of Deoxidation Sequence on Carbon Manganese Steel Weld Metal Microstructures Deoxidation sequence has a strong influence on nonmetallic inclusions formation and the subsequent weld refinement BY F-C. LIAO AND S. LIU ABSTRACT. During investigation of indi­ boundary ferrite and Widmanstatten side­ the molten metal for the purpose of vidual and combined effects of aluminum plate ferrite are often grouped together as deoxidation. Some common deoxidizers and titanium on low-carbon low-alloy primary ferrite (PF). As the weld tempera­ used in steel making are aluminum, silicon, steel weld metal microstructures, experi­ ture continues to drop, fine acicular ferrite manganese, and titanium. In arc welding, mental welds were made on 12.7-mm (AF) laths begin to nucleate intragranularly. these same elements are also used for (0.5-in.) thick A516 C70 pressure vessel Finally, the remaining austenite transforms weld pool deoxidation and alloying. They steel plates using ER70S-3 welding wire to a variety of microstructural features, enter the weld pool from the base metal, and a low-oxygen potential commercial which include bainite (B), martensite (M) electrode, or fluxes. In ladle refining of flux. In the aluminum or titanium (individ­ and pearlite (P). Together with the re­ steels, the deoxidation reactions occur at ual) addition series welds, the results indi­ tained austenite, martensite and carbides near isothermal and equilibrium condi­ cated that the final weld metal microstruc­ form the microconstituents known as tions quite different from those found in tures are related to the inclusion size dis­ MAC. The relative proportions of the dif­ most welding conditions.
    [Show full text]
  • Inclusions Properties at 1673 K and Room Temperature with Ce Addition
    www.nature.com/scientificreports OPEN Inclusions properties at 1673 K and room temperature with Ce addition in SS400 steel Received: 13 January 2017 Fei Pan 1,2,3, Hao-Long Chen4, Yen-Hsun Su1, Yen-Hao Su 5 & Weng-Sing Hwang1 Accepted: 13 April 2017 Inclusion species formed in SS400 steel with Ce-addition was predicted by thermodynamic calculation. The Published: xx xx xxxx analysis of the inclusion morphology and size distribution was carried out by applying Scanning Electron Microscopy (SEM) and Transmission Electron Microscope (TEM). Nano-Fe3O4 particles were also found in cerium-deoxidized and -desulfurized steel and their shapes were nearly spherical. The complex Ce2O3 inclusions covering a layer of 218 nm composed by several MnS particles with similar diffraction pattern. Most importantly, the complex Ce2O3 characterized by using TEM diffraction is amorphous in the steel, indicating that Ce2O3 formed in the liquid iron and then MnS segregated cling to it. Nonmetallic inclusions with high melting point in steel could be harmful in production of high grade wire, spring, and bearing steels1, 2. Inclusions larger than 10 µm are probable to lower the yield strength obviously and also decrease tensile strength3. However, the yield strength and tensile strength would increase remarkably for steels with inclusions less than 0.3 µm3. Adding a or several metal elements into steel has been exploited by steel manufactures in order to form finer grain structures in steel and to improve the performance of the steel4. Titanium5, Aluminium6 and Magnesium7 have been studied a lot as deoxidizers and their functions have also been researched a lot to improve the strength of steel.
    [Show full text]
  • The Effect of Different Non-Metallic Inclusions on the Machinability of Steels
    Materials 2015, 8, 751-783; doi:10.3390/ma8020751 OPEN ACCESS materials ISSN 1996-1944 www.mdpi.com/journal/materials Review The Effect of Different Non-Metallic Inclusions on the Machinability of Steels Niclas Ånmark 1,2,*, Andrey Karasev 1 and Pär Göran Jönsson 1 1 Department of Materials Science and Engineering, KTH Royal Institute of Technology, Stockholm SE-100-44, Sweden; E-Mails: [email protected] (A.K.); [email protected] (P.G.J.) 2 Department of Materials and Manufacturing, Swerea KIMAB, Kista SE-164-40, Sweden * Author to whom correspondence should be addressed; E-Mail: [email protected]; Tel.: +46-0-72-508-43-42. Academic Editor: Richard Thackray Received: 19 December 2014 / Accepted: 11 February 2015 / Published: 16 February 2015 Abstract: Considerable research has been conducted over recent decades on the role of non-metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc.) are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades. Keywords: inclusions; machinability; steel 1. Introduction Advances in steelmaking during the last six decades have resulted in steel grades with very low level of impurities. In recent years, new “clean and ultra-clean” steels have been developed and commercialized by steel producers around the world, thereby responding to the current and future market demands of steel having significantly improved mechanical properties (e.g., fatigue strength and impact toughness) and an improved corrosion resistance.
    [Show full text]
  • Kinetic Data Paper
    Experimental Study of Kinetic Processes During the Steel Treatment at two LMF’s Jörg Peter Kent D. Peaslee David G. C. Robertson University of Missouri-Rolla Department of Materials Science and Engineering 1870 Miner Circle 218 McNutt Hall Rolla, MO 65409-0340 Tel.: 573-341-4714 Fax: 573-341-6934 E-mail: [email protected] or [email protected] Brian G. Thomas University of Illinois at Urbana-Champaign Mechanical and Industrial Engineering Department 1206 West Green Street Urbana, IL 61801 Tel.: 217-333-6919 Fax: 217-244-6534 Keywords: ladle refining, mass transfer rate constant, kinetics, industrial trials ABSTRACT The mass transfer rate during ladle refining was quantified by taking sequential steel and slag samples during the treatment of 20 heats. Each heat was stirred with a different argon flow rate, ranging between 0 and 63 scfm. Heats were treated at two different plants. Al-killed steel was produced at an LMF in 151-t ladles. Si-deoxidized steel was produced at an LMF in 123-t ladles. Mass transfer rate constants were determined for each heat by using process simulation (Metsim) and thermodynamic (FactSage) models. Relationships between mass transfer rate constants and stirring powers as well as ladle geometries were compared between the two plants and published literature. It was found that the reaction kinetics during ladle refining depend on the bulk transport of the steel to the slag/steel interface and on the thermodynamic equilibrium at the slag/steel interface. The necessary refining time decreases if the newly-defined specific steel transport rate is maximized and the slag has a low basicity and FeO concentration before the start of de-S.
    [Show full text]
  • Aluminum-Free Steelmaking: Desulfurization and Nonmetallic Inclusion Evolution of Si-Killed Steel in Contact with Cao-Sio2-Caf2-Mgo Slag
    processes Article Aluminum-Free Steelmaking: Desulfurization and Nonmetallic Inclusion Evolution of Si-Killed Steel in Contact with CaO-SiO2-CaF2-MgO Slag Stephano P. T. Piva and Petrus Christiaan Pistorius * Department of Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA 15213, USA; [email protected] * Correspondence: [email protected] Abstract: In some applications, deep desulfurization and deoxidation of steels without the use of aluminum are required, using Si as a deoxidant instead, with double-saturated slags in the CaO-SiO2-CaF2-MgO system. This work studied the desulfurization and nonmetallic inclusion evolution for the system using an induction furnace and compared the results with FactSage kinetic simulations. Steel samples were taken from the steel melt and analyzed with ICP-MS and combustion analysis for chemistry, and SEM/EDS for nonmetallic inclusion quantity, size, and composition. The results indicate that the steel was deeply desulfurized, with a final sulfur partition coefficient of 580; MgO was reduced from the slag, yielding dissolved [Mg] that transformed liquid Mn–silicate inclusions into forsterite and MgO. Intentional reoxidation of the melt with oxidized electrolytic iron demonstrated a significant concentration of dissolved [Mg] in the steel, by the formation of additional forsterite and MgO upon reoxidation. Citation: Piva, S.P.T.; Pistorius, P.C. Keywords: Aluminum-Free Steelmaking: steelmaking; slag; kinetics; clean steel; nonmetallic inclusions; ladle treatment Desulfurization and Nonmetallic Inclusion Evolution of Si-Killed Steel in Contact with CaO-SiO2-CaF2-MgO Slag. Processes 2021, 9, 1258. 1. Introduction https://doi.org/10.3390/pr9081258 For certain steel products, alumina-containing nonmetallic inclusions are undesirable, whether because of their effect on steel castability (the tendency of solid alumina and spinel Academic Editors: Chenn Q.
    [Show full text]
  • An Experimental Study of Non-Metallic Inclusions Precipitation and Its Effect on Impact Toughness Variations in Low Alloy Steel Subjected to Complex Deoxidation
    University of Northern Iowa UNI ScholarWorks Dissertations and Theses @ UNI Student Work 2017 An experimental study of non-metallic inclusions precipitation and its effect on impact toughness variations in low alloy steel subjected to complex deoxidation Pavel Bizyukov University of Northern Iowa Let us know how access to this document benefits ouy Copyright ©2017 Pavel Bizyukov Follow this and additional works at: https://scholarworks.uni.edu/etd Part of the Metallurgy Commons Recommended Citation Bizyukov, Pavel, "An experimental study of non-metallic inclusions precipitation and its effect on impact toughness variations in low alloy steel subjected to complex deoxidation" (2017). Dissertations and Theses @ UNI. 368. https://scholarworks.uni.edu/etd/368 This Open Access Dissertation is brought to you for free and open access by the Student Work at UNI ScholarWorks. It has been accepted for inclusion in Dissertations and Theses @ UNI by an authorized administrator of UNI ScholarWorks. For more information, please contact [email protected]. AN EXPERIMENTAL STUDY OF NON-METALLIC INCLUSIONS PRECIPITATION AND ITS EFFECT ON IMPACT TOUGHNESS VARIATIONS IN LOW ALLOY STEEL SUBJECTED TO COMPLEX DEOXIDATION An Abstract of a Dissertation Submitted in Partial Fulfillment of the Requirements for the Degree Doctor of Industrial Technology Approved: _________________________________ Dr. Scott R. Giese, Committee Chair _________________________________ Dr. Kavita Dhanwada Dean of the Graduate College Pavel Bizyukov University of Northern Iowa May 2017 ABSTRACT A low level of non-metallic inclusions in steel is the key requirement in the concept of clean steel. Although the concept has received its name quite recently, it has been implemented at the large-scale steel mills for more than 40 years.
    [Show full text]
  • Metallurgy for the Non-Metallurgist, Second Edition Copyright © 2011, ASM International® A.C
    Edited by Arthur C. Reardon ASM International® Materials Park, Ohio 44073-0002 www.asminternational.org Copyright © 2011 by ASM International® All rights reserved No part of this book may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the written permission of the copyright owner. First printing, October 2011 Great care is taken in the compilation and production of this book, but it should be made clear that NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE GIVEN IN CONNECTION WITH THIS PUBLICATION. Although this information is believed to be accurate by ASM, ASM cannot guarantee that favorable results will be obtained from the use of this publication alone. This publication is intended for use by persons having technical skill, at their sole discretion and risk. Since the conditions of product or material use are outside of ASM’s control, ASM assumes no liability or obligation in connection with any use of this information. No claim of any kind, whether as to products or information in this publication, and whether or not based on negligence, shall be greater in amount than the purchase price of this product or publication in respect of which damages are claimed. THE REMEDY HEREBY PROVIDED SHALL BE THE EXCLUSIVE AND SOLE REMEDY OF BUYER, AND IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHETHER OR NOT CAUSED BY OR RESULTING FROM THE NEGLIGENCE OF SUCH PARTY.
    [Show full text]
  • Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ
    metals Article Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ Hao-Nan Lou 1, Chao Wang 1, Bing-Xing Wang 1,*, Zhao-Dong Wang 1, Yu-Qian Li 2 and Zi-Gang Chen 2 1 State Key Laboratory of Rolling and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang 110819, Liaoning, China; [email protected] (H.-N.L.); [email protected] (C.W.); [email protected] (Z.-D.W.) 2 Handan Iron & Steel Group Co., Ltd., No. 232, Fuxing Road, Fuxing Distirct, Handan 056015, Hebei, China; [email protected] (Y.-Q.L.); [email protected] (Z.-G.C.) * Correspondence: [email protected]; Tel.: +86-024-8368-1190 Received: 6 June 2018; Accepted: 9 July 2018; Published: 11 July 2018 Abstract: We have studied here the evolution of inclusions in ladle furnace (LF), Ruhrstahl & Heraeus furnace (RH), and simulated welded samples during Ti-Mg oxide metallurgy treatment and the mechanical properties of the heat-affected zone (HAZ) after high heat input welding. The study indicated that inclusions in an LF furnace station are silicomanganate and MnS of size range ~0.8–1.0 µm. After Mg addition, fine Ti-Ca-Mg-O-MnS complex oxides were obtained, which were conducive to the nucleation of acicular ferrite (AF). The corresponding microstructure changed from ferrite side plate (FSP) and polygonal ferrite (PF) to AF, PF, and grain boundary ferrite (GBF). After a simulated welding thermal cycle of 200 kJ/cm, disordered arrangements of acicular ferrite plates, fine size cleavage facets, small inclusions, and dimples all promoted high impact toughness.
    [Show full text]
  • Three-Dimensional Investigations of Different Sulfides in Steels by Using Electrolytic Extraction
    DEGREE PROJECT IN MATERIALS SCIENCE AND ENGINEERING, SECOND CYCLE, 30 CREDITS STOCKHOLM, SWEDEN 2016 Three-dimensional Investigations of Different Sulfides in Steels by Using Electrolytic Extraction PANG KIT JERRY LAM KTH ROYAL INSTITUTE OF TECHNOLOGY SCHOOL OF INDUSTRIAL ENGINEERING AND MANAGEMENT ~ 1 ~ www.kth.se ~ 2 ~ Three-dimensional Investigations of Different Sulfides in Steels by Using Electrolytic Extraction Abstract The emphasis of this study is focusing on three-dimensional (3D) investigations of the manganese sulfide (MnS) inclusions characteristics in steels by using electrolytic extraction (EE). Two steel grades, 42CrMo4 and 157C, heat treated (HT) at 900 oC were investigated. 42CrMo4 steel samples were heat treated for 5, 10, 15 and 30 minutes while 157C steel samples were heat treated for 5 minutes. Samples of 42CrMo4 were taken from middle zone of an as-cast steel bar while that for grade 157C were taken from 3 different zones (centre, middle and surface). Inclusions were collected on film filters and analyzed by SEM for classification and determination of their characteristics including the size, number density, morphology and composition. The aspect ratio (AR) as well as particle size distribution (PSD) were also compared for steel samples conducted at various HT times. The result showed that EE is a reliable method of investigation inclusion characteristics. The inclusions were classified into 3 types according to their morphology and composition. Type I was elongated rod-like MnS, type II was coarsened sheet-like MnS and type III was spherical MnS inclusions. In addition, HT significantly reduced the Nv and fairly reduced AR but no significant reduction in size observed.
    [Show full text]
  • Of Oxides in Steel
    ISIJ International. Vol. 35 (1995), No, 3, pp. 286-291 Effect of OxYgenContent on Size Distribution of Oxides in Steel Hiroki GOTO.Ken-ichi MIYAZAWAand Kazuaki TANAKA1) Kimitsu R&DLaboratory. Nippon Steel Corporation, Kimitsu. Kimitsu. Chiba-ken, 299-1 1Japan. 1) Kimitsu Works. Nippon Steel Corporation. Kimitsu, Kimitsu, Chiba-ken, 299-1 1Japan. (Received on September22. 1994, accepted in final form on November18. 1994) The effect of the oxygen content in steel on the size distribution of oxides was investigated using Ti deoxidized steels. The numberand size of oxides in the continuously cast steel slabs have been observed and the volume fraction of the fine oxides and the amountof oxygen precipitated as oxides during cooling and solidification have been examined. The results obtained are as follows. The numberand diameter of the fine complex oxides composedof mainly Ti.O.. AI.O, and MnOincrease with increasing the oxygen content in the steel. Almost all the oxygen in the steel is existing as oxides, namely the oxygen content of the steel is almost equal to the amountof the oxides. The oxides precipitated during the cooling and solidification correspond to about 70"/* of the total oxide amountin the steel and are mostly smaller than I O,lm in size. Most of oxides present in molten steel before casting are also fine because these fine oxides can not float and separate from the molten steel and are resultantly suspendedin the molten steel. The oxides smaller than around I0,Im occupy a large proportion of the total oxide content in the steel and govern the oxygen content in the steel.
    [Show full text]