Works: 108 E, SRS ROAD, PEENYA INDUSTRIAL AREA, PHASE 3 BANGALORE 560058 , KARNATAKA INDIA
AMS-HYREL 3D Printing Machine
25/Apr/2019 AMS-INDIA 3D Printing Machine Manufacturing Facility
• 2500 SFT MANUFACTURING AREA IN PEENYA • COLLABORATION WITH HYREL3D INC USA. • 4 MODELS • 60 DIFFERENT HEADS • BEST SUITED FOR R&D ACTIVITIES • BOTH ADDITIVE AND SUBTRACTIVE OPERATIONS ON THE SAME MACHINE • MODULAR INTERCHANGEABLE HEADS • PRINT CAPABILITY UPTO 450 DEG CENTIGRADE. • CAN PRINT MULTI MATERIALS INCLUDING LIQUIDS AND GELS.
AMS-HYREL 3D PRINTING MACHINES
11. SPECIAL 12.PATENTS & 1.INDUSTRIAL ATTACHMENTS CERTIFICATIONS R&D / MFG
10.SOFTWARE & 2.LABORATORY FIRMWARE RESEARCH
9.MATERIALS 3.BUDGET RESEARCH
8.ACCESORIES 4.BIOLOGICAL RESEARCH
7.COLD 7FLOW 6.WARM FLOW 5.HOT FLOW HEADS HEADS HEADS AMS-HYREL 3D PRINTING MACHINES
We manufacture 4 Models suitable for:
• Industrial Research • Laboratory Research • Budget Research • Biological Research
The Industrial Research machine has additional
• Power cord- 750 W • Four USB 2.0 Ports (External) • Chamber Lighting • Extra Cooling Fan with air filtration system • Chamber heater • Filament Heater and Dryer • WLAN: Wi-Fi Capable. • Emergency Off (EMO) Button • Illuminated Control Panel
AMS HYREL 3D PRINTING MACHINE
Industrial Research Hard resolution with encoder feedback of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode
Free Standing : General purpose machine 3D Printing : AT – TALL ( 500MM ) AS – STANDARD ( 250 MM)
Hot Bed : 400x300 MM 600x400 MM
BED TEMP : 120 DEG C 200 DEG C
Laser: 40W CO2 laser 5W, 450nm diode laser
Spindle Tool : 3Phase 1 Phase
HYDRA 16 A AMS HYREL 3D PRINTING MACHINE
Laboratory Research
– Can take a bed of 8x8x8 inch or 200x200x200mm at 75 degree celsius – Has standard spindle tools – Bench top Model – Knee Design
System 30 AMS HYREL 3D PRINTING MACHINE
Budget Research
• Engines are open-air models. • Engines can take up to four heads at once • Build volume is 200mm x 200mm x 200mm (X/Y/Z)
Engine SR AMS HYREL 3D PRINTING MACHINE
Biological Research
• Build volume is 4x4x4 in 100x100x100 mm. • Temperature is 75°C with Sub Ambient option. • Consists of 0.9° Stepping Motor.
Engine HR Print Heads
Modular Heads for Cold Flow, Warm Flow and Hot Flow requirements. 5 Position Yoke for Multiple heads capable of printing different materials. • Hot flow Heads – MK1 250, MK2 250, MK1 450
• Cold Flow Heads - EMO-25,COD-25,SDS-5,CSD-5,SDS-10,CSD-10,SDS-30,CSD- 30,SDS-60,CSD-60
• Warm Flow Heads - VOL-25,KRA-15,TAM-15
Print Heads Hot Flow
• Hot Flow head is for filament-based materials which are deposited at up to 450°C. • Hot Flow heads are only for 1.75mm filaments.
MK1-250 MK2-250 MK1-450 Print Heads – Cold Flow
• Cold Flow is our term for fluid or emulsified materials which are deposited at room temperature, with or without UV Crosslinking. • It is a Non-Filament based head.
SDS-5, SDS-10, CSD-5, CSD-10, EMO-25 COD-25 SDS-30, SDS-60 CSD-30, CSD-60 Print Heads – Warm Flow
Warm Flow is our term for fluid or emulsified materials which are deposited at up to 150°C, with or without UV Crosslinking.
It is a Non-Filament based.
PCL and other medium temperature material can be printed directly from Pellets the size of small peas.
VOL-25 VCD-25 KRA-15 KCD-15 Accessories
Tool Position Accessories. Non-Tool Position Accessories. Tool Position Accessories
Lasers The LA5-808 is a diode laser, 5W at 808nm, and due to its wavelength, it is best suited for darker material. The LA6-450 is a diode laser 6W at 450nm, and performs well on opaque material of any color. The LI40 is an integrated 40w CO2 laser, and performs well on translucent as well as opaque material; available on our Hydra models only. The LI80 is an integrated 80w CO2 laser, and performs well on translucent as well as opaque material; available on our Hydra models only.
Tool Position Accessories Spindle Tools
• The ST1 is intended for light drilling and routing operations and provides between 500 and 5000 RMP to a 1/8" chuck. • Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers. • The ST3 is presently in testing, but provides more power; available on our Hydra models only.
ST1 Tool Position Accessories
Inspection microscope
• The Inspection microscope provides magnification.
• The Quiet Storm fan provides additional cooling.
Non-Tool Position Accessories
• The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
• The Printer Support Kit can included with every printer, and includes a build plate, tape, and a variety of hand tools like Allen Keys, Spanners, tweezers, Wire Brush, Razors, and a Spatula. • We can also supply the Build surfaces made of Glass,
• The SDK | Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
• The LTK | Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
Non-Tool Position Accessories
• The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool. • The Filament Kit provides a variety of filaments to get you started with your printer. • The Hot bed • Filament heater • Injection Molding attachment • Press bending attachment • Magnetic bed • The Tramming Tool, provided with every printer, is used to level the build surface • Chamber heater maintains temperature upto 50 deg. • Hepa Filter Air Purifier • Tablet for user interface
Materials to be printed with for Cold Flow Heads
Quick Cure Clay Play-Doh Adhesives Resins Clay, Generic RTV Silicon Epoxy, Two-part Sculpy Fimo Sugru Glue Kato Metal Clay,Precious Metal Clay Modeling Clay PEG PolyEthylene Glycol Porcelain Plasticine
Materials to be printed with for Warm Flow Heads
Adhesives Fimo Kato Glue PCL Plasticine Resins Sculpey Wax Materials to be printed with Hot Flow Heads
ABS, Acrylonitrile Butadiene Styrene BendLay FilaFlex Flex45 LayBrick LayWood NinjaFlex Nylon PC, PolyCarbonate PEEK, PolyEther Ether Ketone PET, PolyEthylene Terephthalate PETG, PolyEthylene Terephthalate Glycol-modified PLA, PolyLactic Acid PlastInk Rubber PP, PolyPropylene PVA, PolyVinyl Alcohol T-Glase
Software and Firmware 3D printing machines have our proprietary Repetrel software and firmware to control the machine up to 6 axes. Repetrel is the name of our proprietary software which runs our equipment. Slic3R for slicing Free-CAD for importing the STL files Team viewer for trouble shooting and maintenance.
Certifications. Thank You
Visit us at www.ams-india.co.in
Disclaimer Advance Mechanical Services Private Limited , herein referred to as AMS-India provides a wide array of presentations and reports, with the contributions of various professionals. These presentations and reports are for informational purposes and private circulation only and do not constitute an offer to buy or sell any securities mentioned therein. They do not purport to be a complete description of the markets conditions or developments referred to in the material. While utmost care has been taken in preparing the above, we claim no responsibility for their accuracy. We shall not be liable for any direct or indirect losses arising from the use thereof and the viewers are requested to use the information contained herein at their own risk. These presentations and reports should not be reproduced, re-circulated, published in any media, website or otherwise, in any form or manner, in part or as a whole, without the express consent in writing by AMS-India. Any unauthorized use, disclosure or public dissemination of information contained herein is prohibited. Unless specifically noted, AMS-India is not responsible for the content of these presentations and/or the opinions of the presenters. Individual situations and local practices and standards may vary, so viewers and others utilizing information contained within a presentation are free to adopt differing standards and approaches as they see fit. Products and names mentioned in materials or presentations are the property of their respective owners and the mention of them does not constitute an endorsement by AMS-India. Information contained in a presentation hosted or promoted by AMS-India is provided “as is” without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. AMS-India assumes no liability or responsibility for the contents of a presentation or the opinions expressed by the presenters. All expressions of opinion are subject to change without notice.