DOCSLIB.ORG

Plastic Processing and Packaging Industries

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plastic Processing and Packaging Industries Plastic Processing And Packaging Industries The Book covers PART-1 •Introduction •Brief History •Definition •Classification of Plastic •Technical Specifications •Mechanical Tests •Thermal Tests •Electrical Tests •Optical Tests •Plastic Processing •Break up of Plastic Processing Capacity •Consumption Pattern of Thermoplastic •Demand Estimates of Plastics by 2000 AD •compuonding & Formulation •Waste Recycling •Plastic Processing Machinery •Major Products of Exports •Thermosets •Phenol Formaldehyde •Urea Formaldehyde •Melamine Formaldehyde •Cellulose Acetate •Injection Moulding •Injection Moulding Process •Historical Development •Injection Moulding Machines •Moulds •Waste Recycling •Injection Moulded Products •Extrusion •Extrusion Process •Extruder Construction •Mechanism of Flow •Extrusion Operations •Advancing of Blown-Film •Cast Film Extrusion •Sheet Extrusion •Pipe Extrusion •Rods/Profiles Extrusion •Co-Extrusion •Blow Moulding •Historical Developments •Process Description •Extrusion Blow Moulding •Injection Blow Moulding •Cold Preform Blow Moulding •Stretch or Orientation Blow Moulding •Co-Extrusion Blow Moulding •Materials •Moulds •Automation •Other Processes •Rotational Moulding Process •Thermoforming Process •Compounding of PVC •Introduction •Elements of Compounding •Methods of Compounding •Compounder Extruder •Custom Compounding for Special Properties •PVC Formulations for Common Products •PVC Pipe Formulations •Windows Profile Formulations •Interior PVC Profile Formulations •PVC Siding Formulations •Cellular PVC Profile Formulations •Extruded PVC Sheet & Film •Formulations •Calendered PVC Sheet & Film •Formulations •PVC Injection Moulded Pipe Fitting Formulations •High Flow PVC Injection Moulding Formulations •Extrusion Blow Moulding Rigid PVC Containers •Crystal Clear Food Contact Bottles Formulations •Clear Bottles Good on Taint/Odour Formulations •Blow Moulded Bottle Formulations •Blow Moulded PVC Bottle Formulations •Mineral Water Bottles Formulations •Epoxy Reicpe for 1 Ltr. Bottle Formulations •PVC Bottles for Shampoo Formulations •Shoe Soles Formulations •Tests for Compounds •Floor and Wall Converings Formulations •Typical Light Stable Formulations •Carbon Black Properties •Comparison Titanium Di-oxide & Zinc-oxide •Potable Water Pipe •General Purpose Vinyl Film •Sheeting for outdoor Upholsetery •Processing of PVC •Introduction •PVC Resin •Injection Moulding •Extrusion •Additives for Improving Processing •Heat Stabilizers •Processing Aids •Lubricants •Impact Modifiers Compounding •Hot Melt Compounding •Compounding Lines •Suggested K-Value of PVC Resins •Influence of Formulations •Applications of PVC •World of PVC Applications •Review of Major Applications •Rigid PVC Pipes •Flow through Rigid PVC Pipes •Manufacturing of PVC Sheets •Blister Packaging •Vacuum Formed Products •Skin Packaging •Typical Application of PVC Sheets •Typical Blister Packaging Applications •End use Applications Chart •Non-Packaging Applications •tropicalised Blister Pack •PVC Integral Foam Sheets Applications •Typical high flow PVC Formulations •Blow Moulded Bottles & Containers •PET Vis-A-Vix PVC Stretched Bottles •PVC heat Shrinkable Bands •Blow Moulding of PVC Bottles •Injection Blow Moulding •Orientation •Cushioned Vinyl Flooring •Production of cushion vinyl flooring •Screen coating system •Double sided coating of open weave fabrics •PVC in medical Applications •Moulding of PVC Footwear (compounding, Moulding, Machines and Moulds) PVC Uppers •Rotational casting & Slush Moulding •Improving Moulding Through Melt Flow Oscillation •Orientation Effects in moulding Technology •How Does Rheo moulding work •Melt flow oscillation improves properties •Polymides to extend High-Wear Applications to Replacemental •Polyurethanes •History of Development •Raw materials •Foams (Flexible, Polyether & Polyester Foams) Part-2 •Blow Moulded Plastic Containers •Bopp Adhesive Tape •Bopp Film •Conference Bags, Folders & Diary •Disposable Plastic Cup, Glasses etc. •Disposable Plastic Syringes •Fibre Corrugated Sheet •F.R. Plastic Products •HDPE containers Polyjars •HDPE/LDPE Pipes & Fittings •HDPE/PP Woven Sacks (Bags) •HMHDPE Film & Bags •Injection Moulded Plastic Components •Injection Moulded Thermo Plastic Products •Laminations •LDPE/HDPE Carry Bags from Dana •Multilayer Co-extrusion (3 layer film with lamination & printing) •PET Bottles & Containers •Plastic Bottles & Containers •Plastic Buttons from Polyster Sheets and Rods •Plastic Collapsible Tubes •Plastic I.V. Bottles •Plastic Moulded Furniture •Polypropylene TQ Blown Film •Polythene Bags with Printing •Polyurethane Foam •PP/HDPE Box Strappings •PVC Compound for Blown Films •PVC Flexible anbd Transperant Blown Films •PVC Flexible Pipes •PVC Footwear •PVC Helical Pipes •PVC Insulation Tape •PVC Leather Cloth •PVC Water Tubing •PVC wire & Cables •Reprocessed High Density Polythylene Dana from Waste •Reprocessed Polythene Data •Rigid PVC Pipes & Fittings •Roto Moulding Products •Thermocole Sheets Part-3 •Directory Section •Manufactuers and suppliers of Plant and Machineries (Indian and Overseas) Engineers India Research Institute (EIRI) is a renowned name in the industrial world for offering technical and financial consultancy services. EIRI services are: •Detailed Feasibility Reports •New Project Identification •Project Feasibility and Market Study •Identification of Lucrative Industrial Project Opportunities •Preparation of Project Profiles / Pre-Investment and Detailed Feasibility Studies, •Market Surveys / Studies, Market Survey Cum Detailed Techno-Economic Feasibility Reports •Project Reports in CD Roms •Identification of Plant /Process/Machinery and Equipment, Industrial General Guidance for setting up new industrial projects. • •Our most up-to-date and Technologically Advanced Industrial Project Reports, categorized with respect to Financial Outlays and Sector – wise Classification are immensely useful for : Existing Small or Medium Scale Industrialists facing competition from large houses Young Entrepreneurs dreaming to start their own industrial enterprise Young Graduates and Professionals wishing to begin their career Industrialists interested in Debottlenecking their capacities & New Product – Lines Large Industrial Houses pursuing Expansion, Growth and Diversification Plans Latest Books.
Load more

Recommended publications
  • Variation Analysis of Liquid Delivery Using Blister Packs
    Manufacturing of Lab-on-a-Chip Devices: Variation Analysis of Liquid Delivery using Blister Packs by Sivesh Selvakumar B.E. Mechanical Engineering (2009) College of Engineering, Guindy, India Submitted to the Department of Mechanical Engineering in Partial Fulfillment of the Requirements for the Degree of Master of Engineering in Manufacturing MASSACHUSETTS INSTITUTE OF TECHNOLOGY at the Massachusetts Institute of Technology NOV 0 4 2010 September 2010 LIBRARI ES ARCHIVES © 2010 Sivesh Selvakumar All rights reserved The author hereby grants to MIT permission to reproduce and to distribute publicly paper and electronic copies of the thesis document in whole or in part in any medium now known or hereafter created Signature of Author............ .......... e artm t of Mechanical Engineering ......................g '21ust 2 " 10 Certified by........... .... A..h. Lectu epartment of Mecanical Engineering 71 A -"Ii ThesMwSupervisor A ccepted by............................................ David E. Hardt Chairman, Committee on Graduate Students This page has been intentionally left blank Manufacturing of Lab-on-a-Chip Devices: Variation Analysis of Liquid Delivery using Blister Packs by Sivesh Selvakumar B.E. Mechanical Engineering (2009) College of Engineering, Guindy, India Submitted to the Department of Mechanical Engineering in Partial Fulfillment of the Requirements for the Degree of Master of Engineering in Manufacturing Abstract Components for on-chip storage and delivery of liquid reagent are necessary for many commercial applications of lab-on-a-chip technology. One such system uses a 'blister pack' that is pushed by an actuator. Over the course of product development, Daktari Diagnostics had completed nominal design of a blister pack for their flow rate requirements.
    [Show full text]
  • Pharmaceutical Packaging Materials Quality Control and USP
    Application Note Pharmaceutical Testing and Research Pharmaceutical Packaging Materials Quality Control and USP Chapter <661.1> Compliance Identification of packaging materials using the Agilent Cary 630 FTIR for quality control and detection of counterfeit pharmaceuticals Authors Introduction Frank Higgins The composition and quality of packaging materials can have a critical impact on Fabian Zieschang the performance, function, and production costs of pharmaceutical medications or Agilent Technologies Inc., USA drugs. Improper packaging can cause the active pharmaceutical ingredients (API) in medications to degrade faster and have shorter shelf lives. Detecting problems, impurities, or incorrect polymer compositions early in the packaging process or packaging material supply can prevent the costly recall of defective end-products from the consumer. Mid-infrared FTIR spectroscopy has a long history of identifying the chemical composition of polymers, fillers, and additives used in the pharmaceutical, coatings, and chemical industries. The mid-infrared spectrum is often referred to as the chemical fingerprint of a material. This is because of the rich detail provided by the technique and its specificity in confirming a known composition. FTIR spectroscopy is a rapid and easily implemented technique that is widely used for the screening of polymers and other packaging materials. FTIR spectroscopy can be used for: – The qualification and identification of raw materials to be used for pharmaceutical packaging in accordance with regulations – Quality assurance (QA) of materials during the manufacture of packaging – The identification of suspected counterfeit pharmaceutical products by comparing the differences in the plastic packaging composition between a genuine product and a product of uncertain origin. This application note focuses on the use of the Agilent Cary The Cary 630 FTIR spectrometer meets the performance 630 FTIR spectrometer for the analysis of polymers used in specifications required by USP.
    [Show full text]
  • Monomaterial Packaging: a Solution to the Global Plastics Crisis
    Dividella MONOMATERIAL PACKAGING: A SOLUTION TO THE GLOBAL PLASTICS CRISIS In this article, Peter Grassl, Sales Director, Dividella, discusses the extent of environmental damage caused by plastic waste in the oceans, and explains how cardboard monomaterial packaging is not only a step towards tackling this issue, but also a potential source of extensive cost savings in pharmaceutical logistics and storage. OVERVIEW The most obvious manifestation of this environmental crisis is the “Great Pacific In February 2108, a young sperm whale Garbage Patch”, an 80,000-tonne island washed up on a beach in south-eastern of mostly plastic refuse swirling around Spain. When scientists carried out a between California and Hawaii. These necropsy, they discovered the huge mammal plastics not only kill animals, but also had succumbed to a fatal infection caused decimate coral reefs and damage human by more than 30 kg of plastics in its health as they break down into microplastic stomach and intestines. The whale was far from alone; some 90% of dead sea birds are found to have “Dividella has long espoused the plastic in their gullets. concept of using 100% monomaterials And the problem is only getting worse, an estimated in its packaging solutions – not just 10 billion kg of plastics for environmental reasons but also enter rivers and oceans to deliver much lower total cost of every year – a quantity on course to double by 2025 ownership and total cost of package.” (Figure 1). Peter Grassl Sales Director T: +41 81 750 33 66 Dividella AG Werdenstrasse 76 9472 Grabs Switzerland Figure 1: An estimated 10 billion kg of plastics enter rivers and oceans every year.
    [Show full text]
  • Materials Definitions, 7/12/19
    Recycling Steering Committee Modernizing Oregon’s recycling system with support from Oregon Consensus Materials Definitions, 7/12/19 The following definitions are intended for reference use only when describing materials for collection and processing research and do not define any statement of work for infrastructure research conducted by Cascadia Consulting and DEQ contract 057-19. GLASS Container Glass means any color glass bottle or jar used to package food, beverages and other consumable liquids. Includes bottles that are returned by consumers to be washed and refilled. Includes bottles and jars for: ● Food ● Beer ● Liquor ● Wine ● Juice ● Soft drinks ● Medicine METAL (FERROUS AND NON-FERROUS) Aluminum means aluminum beverage cans and food containers, aerosol and other non-food cans, aluminum foil, pans and trays, and scrap aluminum such as lawn furniture and screen doors. Metal Containers means tin, steel and aluminum cans or containers used to contain products such as beverages, food or aerosolized products. Scrap Metal is the combination of ferrous and non-ferrous waste metal, metallic material and any product that contains metal that is capable of being recycled from previous consumption or product manufacturing. For curbside collection programs, scrap metal typically cannot be longer than 30 inches and must weigh less than 30 pounds. Scrap metal can include aluminum pie pans, trays, and foil. For some depots it may include bulky materials such as appliances (e.g., discarded stoves, washers, dryers, refrigerators, and other large household appliances or “white goods”) Tinned Cans means steel food and beverage cans with a tin coating and may include other coatings. The Recycling Steering Committee is a collaborative of representation from the Assoc.
    [Show full text]
  • Improving Subject Compliance with Smart Pill Bottles by Norman M
    Vol. 3, No. 8, August 2007 “Can You Handle the Truth?” Improving Subject Compliance with Smart Pill Bottles By Norman M. Goldfarb According to the American Heart Association, 12% of patients never fill their prescriptions, 12% fill them but do not take them, and 29% start taking them but stop prematurely. Only 47% take them all.1 Compliance by subjects in clinical trials can be much higher, but there are reports of average compliance rates in some trials of only 43% to 78%.2,3 One approach to addressing this compliance problem is to give subjects “smart” pill containers that help them take pills on time and correctly.4 Some of these devices upload data about when the container has been opened, and provide reporting and analysis functionality. The smart pill containers described below perform some or all of these functions. CerePak CerePak is a blister pack that records when pills are removed. Subjects can also answer questions printed on the packaging by pressing “buttons.” The data is uploaded through RFID to a reader attached to a computer. The product is customized to hold up to 32 pills. Company: MeadWestVaco Product: CeraPak Alerts user: Beeps Instructions: Printed on packaging Records & transmits Records openings of individual blisters. Upload data by placing package on data: reader connected to computer. Cost: $75 for package; $250 for reader Website: www.meadwestvaco.com eCAP eCAP is a closure (cap) that fits standard pill bottles. eCAP beeps and flashes to remind subjects to take their medicine. It records openings and transmits them through RFID to a reader.
    [Show full text]
  • A Study of Water Vapor Transmission Rate of Blister Packs by Usp Standard and Continuous Gravimetric Protocol
    A STUDY OF WATER VAPOR TRANSMISSION RATE OF BLISTER PACKS BY USP STANDARD AND CONTINUOUS GRAVIMETRIC PROTOCOL By Nikhil Mehrotra A THESIS Submitted to Michigan State University in partial fulfillment of the requirements for the degree of Master of Science Packaging 2010 ABSTRACT A STUDY OF WATER VAPOR TRANSMISSION RATE OF BLISTER PACKS BY USP STANDARD AND CONTINUOUS GRAVIMETRIC PROTOCOL By Nikhil Mehrotra The water vapor transmission rate (WVTR) is essential in determining the shelf life of pharmaceutical products in the package. The WVTR of blister pack was determined by using USP 671 and the continuous gravimetric protocols. The WVTR values from the two protocols were compared and the accuracy was validated. The WVTR of the blister pack determined using the USP 671 protocol was 0.0452 mg/day/blister with a standard error of 0.0010 while the WVTR using the continuous gravimetric protocol was 0.0652 mg/day/blister with a standard error of 0.0067. The WVTR were compared using t-statistic for unequal sample size with unequal variance and no significant difference was detected. The accuracy of the two protocols was compared through the pooled variance of the data -4 points. USP 671 standard protocol had a pooled variance of 4.99 x 10 while for -5 the continuous gravimetric protocol it was 2.13 x 10 . Therefore the continuous gravimetric protocol showed higher accuracy than the USP standard protocol. Several recommendations have been suggested for the USP standard protocol in order to make the protocol more accurate: for the WVTR of the blister pack, the unsteady state should be considered and excluded from the calculation, Monitoring of the humidity and temperature is critical, Chamber size and the time of equilibrium for the specific relative humidity needs to be outlined.
    [Show full text]
  • 121:2; :21" Good 'Seal Range For' Uncoated Tyvek®, Evidence of Seal
    USOO5830547A Ulllted States Patent [19] [11] Patent Number: 5,830,547 MacKenZie et al. [45] Date of Patent: Nov. 3, 1998 [54] PEEL-OPEN PACKAGE 0 785 066 7/1997 European Pat. Off. 7144391 6/1995 Japan . [75] Inventors: Fiona MacKenzie, Bloomington, 07205562 3/1997 Japan - Minn; Roy Christopherson, SWindon; 96/04861 2/1996 WIPO - Kingdom European Patent Of?ce, International Search Report for [73] Assignee: ReXam Medical Packaging, Inc-, PCT/IB 97/00862, completed Oct. 27, 1997 by P. Olle. Vernon H1115, 111- “Coated Vs. Uncoated Webs In Thermoform/Fill/Seal”; Randall D. Brinkman; Paper Film Foil Conv. 1984, 58, No. [21] Appl. No.: 678,984 10, Oct. 19, 1984; pp. 78—82. [22] Filed? Jul- 12, 1996 Primary Examiner—Christopher Raimund 6 Attorne , A em, or Firm—Bell Seltzer Intellectual Pro ert [51] Int. Cl. ................................................... .. B29D 22/00 Law GryoupgofAlston & Bird LLP P Y [52] US. Cl. ...................... .. 428/361; 428/365; 206/363; 206/439 [57] ABSTRACT [58] Field of Search ................................ .. 428/358, 36.5, _ _ _ 428/357, 361; 206/363, 439 A peel-open package includes a polymeric ?lm, a lid adhered to the polymeric ?lm along a continuous portion [56] References Cited thereof and a product encapsulated between the polymeric ?lm and lid material. The polymeric ?lm is typically a US PATENT DOCUMENTS coeXtruded multiple layer ?lm having a scalable layer and at 3 891 089 6/1975 Goodwin et a1‘ ' least one base layer. The sealable layer comprises an ethyl 4j194:622 3/1980 Lewis _ ene copolymer derived from at least one monomer selected 473617237 11/1982 Heiremans et a1_ _ from the group consisting of vinyl acetate and 4,367,312 1/1983 Bontinck et a1.
    [Show full text]
  • A Critical Assessment of Factors Effecting Blister Pack Formation In
    A Critical Assessment of Factors Effecting Blister Pack Formation in the Pharmaceutical Industry By Keith W Allen A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of the degree of Doctor of Philosophy of Loughborough University Aug 2010 Department of Materials Supervisor: Dr G.W.Critchlow Acknowledgements I would like to thank my friend and colleague Dennis O’Reilly for reviewing the technical content and Mark Nicholls a Senior Analyst in the Physical Properties group at GlaxoSmithKline Research and Development Site in Harlow, in assisting in analysing the surface and material properties of the blister films discussed as part of my research studies. I would also like to thank my supervisor Dr Gary Critchlow for his support and advice in the preparation of this report, and Keith Yendall from the IPTME Department of materials at Loughborough University in assisting in analysing the surfaces of blister strips. A special thanks also to my wife Maria and my Daughter Kayleigh for their patience and support in typing sections and proof reading my entire Thesis. 2 Abbreviations AES – Auger Electron Spectroscopy APS – Alcan Packaging Singen AFM – Atomic Force Microscopy bpm – Blisters Per Minute BSI – British Standards Institute CEN – European Committee for Standardisation CLF – Current Lidding Foil COCs – Cyclic Olefin Co-polymers cpm – Cycles Per Minute DMF – Drug Master File DSC – Differential Scanning Calorimetry EMEA – European Medicines Evaluation Agency EU – European Union EP – European Pharmacopeia FDA
    [Show full text]
  • Food Packaging
    The Food System and the Environment Food Packaging Robert F. Testin and Peter J. Vergano (803)656-2229 (803) 656-5684 11 segments of the packaging With self-service supermarkets, pack- aging that make products easier to use or industry, including food packag- aging has taken on the role of providing provide more convenience for the con- A ing, face environmental issues. information. The package is the manu- sumer. For example, fast-food chains are under facturers' link with the customer at the all pressure to reduce the amount of solid important point of purchase. The pack- The Role of Food waste they generate and Maine has age must attract the customer to make a Packaging in Waste banned fruit drinks in aseptic packages purchase. It also, provides information (juice boxes). on how to use and store the product and Reduction Yet, packaging is integral to today's lists ingredient and nutrition facts. Food packaging can reduce waste. life style (see box, "A Country Without Finally, utility-of-use has become a For example, a pod of fresh peas is 62 Food Packaging"). Nowhere would the key element in many food packages. percent inedible. In order to get a pound loss of modern packaging be more Microwaveable packages, single serving of fresh peas, about 2.6 pounds of peas quickly felt than in the food processing sizes, recloseable and resealable pack- and pods would have to be purchased, and distribution system. In underdevel- ages, squeezeable packages, and shelf- resulting in 1.6 pounds of discarded pods. oped countries where packaging is mini- stable packages are all examples of pack- However, buying 1 pound of frozen peas mal or nonexistent, food losses of 30-50 percent are not uncommon.
    [Show full text]
  • What You Need to Know About Ordering Blister Card Materials What You Need to Know About Ordering Blister Card Materials
    What You Need to Know About Ordering Blister Card Materials What You Need to Know About Ordering Blister Card Materials Go into any department store, grocery store, or convenience store across the globe and one of the first things that will draw your eye are the products on display in blister packaging. You’re no doubt familiar with them: thin plastic bubbles mounted to cardboard stock designed to showcase the products they contain. There are many reasons blister packaging is so popular. It is unparalleled at highlighting the enclosed product, often augmenting their contents with attention-getting design and colorful graphics. Blister packages put the actual product the consumer will buy in clear view at the point of purchase, helping to generate or confirm buying interest.And for manufacturers, blister packaging can be a relatively simple and economical way to get products in front of consumers. They can also help protect the product when it’s on display and when it’s in transit. Consumer product manufacturers considering using blister packaging for their products should take into account a number of factors that can impact how effective the packaging will be, both from a marketing and an economic standpoint. Here are a few considerations you’ll want to keep in mind when determining what kind of blister packaging and blister card composition may be right for your products. What are the main types of blister packaging? Blister packages encompass a wide range of packaging options for a host of products — consumer goods, pharmaceuticals, and food service applications are just a few.
    [Show full text]
  • Flexible Packaging Test Equipment
    Flexible Packaging Test Equipment www.rdmtest.com ASSURED QUALITY TESTING SOLUTIONS www.rdmtest.com ASSURED QUALITY TESTING SOLUTIONS THE RDM TEST EQUIPMENT TEAM ARE FOCUSSED ON MANUFACTURING FLEXIBLE PACKAGING TEST EQUIPMENT DIRECTLY FROM OUR UK FACTORY, WITHIN AN ISO 9001 MANUFACTURING ENVIRONMENT. ESTABLISHED IN 1985, OUR PRODUCTS OFFER SUPERIOR TECHNICAL PERFORMANCE, RELIABILITY, EASE OF USE AND VALUE FOR MONEY, FOR A WIDE RANGE OF PHYSICAL TESTING METHODS. LABORATORY & PRODUCTION HEAT SEALERS Heat Sealability of flexible films, ASTM F2029. Flexible pouches, packs, all heat sealable films for QC, R&D, prototyping and small scale production. (Pages 4-11) MEDICAL/CLEANROOM HEAT SEALERS with VACUUM & GAS FLUSH OPTIONS Heat Sealing medical pouches, blisters, & trays, validated to ISO11607. (Pages 12-17) TRAY / BLISTER PACK / POT HEAT SEALERS Small scale production of semi-rigid/rigid packs with flexible lidding films. (Pages 18-19) HOT TACK TESTER Hot Tack / Seal Strength of heat sealable films used in high speed packaging lines. ASTM F1921, ISO EN DIN55571. (Pages 20 -21) UK & International: T: +44 1279 817171 E: [email protected] Americas: T: +1 (469) 805 0003 E: [email protected] www.rdmtest.com ASSURED QUALITY TESTING SOLUTIONS www.rdmtest.com INTERNATIONAL SUPPORT OUR EXPERIENCED DISTRIBUTORS AND AGENTS PROVIDE LOCAL SUPPORT, OFFERING YOU ADVICE AND GUIDANCE WITH TEST METHODS, TECHNIQUES AND EQUIPMENT SELECTION. AFTER SALES SUPPORT AND CALIBRATION SERVICES ARE PROVIDED FROM OUR DIRECT OFFICES AND INTERNATIONAL PARTNERS THROUGHOUT EUROPE, ASIA/PACIFIC, AMERICAS, AND AFRICA. SEAL STRENGTH / TENSILE TESTER Measure Seal Strength, Delamination, Bond Strength, Tensile Strength. ASTM F88. (Pages 22-23) PRECISION FRICTION / SLIP TESTER Measure Static & Dynamic Friction of films, packaging, paper, & board.
    [Show full text]
  • How to Safely Pack and Ship Batteries
    How to safely pack and ship batteries Effective date: January 1, 2017 How to safely pack and ship batteries Effective January 1, 2017 How to safely pack and ship batteries Although they are very common today in portable electronics, tools and other applications, batteries can be a source of dangerous heat, sparks or fire if they are improperly packaged for shipping. For this reason, UPS® customers must follow applicable safety regulations and appropriate precautions when preparing batteries for transportation. Battery shipments may be subject to both U.S. and international safety regulations, and because of the potential dangers associated with violations of those regulations, people who do not follow the regulations when packing their shipments could be subject to fines or other penalties. UPS has assembled this illustrative guide to help you safely pack and ship many kinds of batteries. In some cases, such as with alkaline or certain nonspillable lead-acid batteries, your responsibilities may be limited to simple steps such as: selecting strong outer packaging; carefully protecting battery terminals to prevent sparking or short circuit; and carefully preparing the interior package components to keep tools or other metal objects away from batteries. Other types of batteries, including lithium ion and lithium metal types, also may be fully regulated as hazardous materials (also known as dangerous goods) for transportation, so that in addition to those basic safety precautions they require use of specialized packaging, specific hazard labeling, and specific documents certifying compliance with the applicable regulations. All shippers are required to understand and comply with the applicable regulations and UPS tariffs.
    [Show full text]