DOCSLIB.ORG

Triple Play Splash T-Ball™ • Thoroughly Dry the Unit Before Storing

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Triple Play Splash T-Ball™ • Thoroughly Dry the Unit Before Storing IMPORTANT INFORMATION ™ • Disconnect hose after use. Do not store the unit connected to the hose. Triple Play Splash T-Ball™ • Thoroughly dry the unit before storing. Store out of direct sunlight. Triple Play Splash T-Ball SKU: 648465C STREAM HEIGHT AND WATER PRESSURE AGES 2+ YEARS • Stream height without ball is around 60 in. to 67 in. (1.5m-1.7m). ENG ADULT ASSEMBLY AND SUPERVISION REQUIRED • For best results, ball should be 25 in. o of the ground. • To raise the ball height, increase the garden hose’s water pressure. To lower the ball height, decrease the water pressure. CONTENTS D. DISPOSAL • Disassemble and dispose of equipment in such a manner that no hazardous conditions such B. C. C. as, but not limited to, small parts and sharp edges exist at the time equipment is discarded. A. D. E. Rotate the tee to adjust for left or right-handed children. F. G. x3 B. Illustrations are for reference only. Styles may vary from actual contents. E. LIMITED WARRANTY The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product WATCH ASSEMBLY VIDEO: is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is www.littletikes.com/videoinstructions Switch from required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available A. pop-up T-Ball under this warranty will be the replacement of the defective part or replacement of the product. This to splash T-Ball! warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. *The warranty period is three (3) months for Hose Connection daycare or commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for WARNING purchase after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of • Keep these instructions for future reference. purchase for warranty service. This warranty gives you specic legal rights, and you may also have other • Adult assembly required. rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or • Constant, competent adult supervision is required when children are playing near water. Do not leave limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. children unattended. • This product is intended for use by children ages 2 years and up. • Only one (1) batter at a time should play with this unit. • Do not aim at eyes or face. • Do not place hands, ngers or face near or on ball tee. Please keep this manual as it contains important information. • Do not place face directly in front of the running water when playing splash T-Ball. • Never hit the ball or swing the bat at people or pets. © The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other • Do not put any objects other than the balls provided on the tee. countries. All logos, names, characters, likenesses, images, slogans, • This product is intended for outdoor domestic family use only. and packaging appearance are the property of Little Tikes. • Only use on a grass area. Never use on concrete or hard surfaces. • Use this product on a level surface and avoid using near swimming pools, on or near steps, hills or inclines. Printed in China www.littletikes.com 0319-3-C www.littletikes.co.uk • Keep the area around the product clean and clear of objects to prevent slips and falls. • It is recommended to use protective gear, such as a batting helmet, when playing. Little Tikes Consumer Service MGA Entertainment UK Ltd MGA Entertainment (Netherlands) B.V. • Do not allow children to sit, stand, play or climb on top of the surface. Failure to do so may cause the 2180 Barlow Road 50 Presley Way Klipperaak 201, 2411 ND Bodergraven, NL product to become unstable. Hudson, Ohio 44236 U.S.A. Crownhill Tel: +31 (0) 172-758 038 • Intended for use with the supplied accessories only. Milton Keynes E-mail: [email protected] 1-800-321-0183 MK8 0ES • Never use with anything except clean hose water. Use of other liquids may be harmful or damage the unit. Bucks, UK • Do not store or leave hose in product when not in use. 0800 521 558 4 1 TIP: When putting together the Triple Play Splash T-Ball™ take note of T-BALL the orientation. See image on page 1 for correct assembly. ASSEMBLY 1A 2A 3A 1 E 2 E BACK VIEW E B TIP! There is a slot (circled) on one side of A the bottom piece (E). Match it with the correct side on the tower (B). A Insert all three balls into the tray on Rotate the tee to adjust for left or Ball will pop up and land on the tee B the base (A). Make sure the dial is right-handed children. Then, press holder. Swing the bat to hit the ball. turned to the left. down on the pedal once with your E foot to release a ball. TIP: Hold the pedal down until the Attach the bottom piece (E) to the base (A). ball enters the chamber on the E bottom piece (E). POP-UP LAUNCHER Attach the tower (B) to the bottom piece (E). Buttons will snap in place. INSIDE VIEW NOTE: Large opening on the tower should 3 face towards the turn dial. 1B 2B 3B C B 4 B D E C 3 C 2 While keeping the base steady, push in Insert all three balls into the tray. Press down the pedal to release a the buttons with one hand and remove ball. Swing when the ball pops up. tower (B) with your other hand. When B pulling, angle it away from your face. 1 SPLASH T-BALL Attach top piece (D) to the tee (C). Opening on the top piece should face the ball holder on the tee. It will snap in place. 1C 2C 3C 5 FRONT VIEW: BASE (A) Step to release ball. Turn dial to the: A = Pop-Up T-Ball = Splash T-Ball Before beginning, make sure the hose Turn the dial to the right. Swing when the ball oats up. To install the tee (C) to the tower (B), rst align connector is extended out. Connect a Then, insert the balls into the tray. TIP: Increase or decrease the water the arrows. Then, angle the tee as shown. Insert garden hose (not included) into the Gradually turn on the hose until pressure to adjust the height of the ball. the front and then push down on the back. Securely connect a garden hose for Splash T-Ball. connector on the base. Twist the you have a preferred height. Press See IMPORTANT INFORMATION for TIP: Pull out the connector before connecting the hose. connector clockwise until it is securely the pedal to release a ball. more details on water pressure. 2 attached to the hose. 3.
Load more

Recommended publications
  • Baseball Pitch by Pitch Dice Game Instruction
    Baseball Pitch By Pitch Dice Game By Michel Gaudet July 2021 This game is a dice-based baseball game for one or two players. It simulates a baseball game between two teams from history, modern day, or your own imagination. It’s play with a D4. D6, D8, D10 (0-9 or 1-10), D12 and a D20 dice. Player Positions Pitch Table D6 Swing Table D4 DP Table D6 1 Pitcher (P) 1-2 Strike 1 hit Double Play 2 Catcher (C) 3-4 Ball 2 no hit 1-3 DP 3 First baseman (1B) 5-6 Hit by Pitch 3-4 no swing 4-6 Single Out 4 Second baseman (2B) Base Stealing Table D8 5 Third baseman (3B) 1-3 Runner is Out Foul Table D12 TP Table D6 6 Shortstop (SS) 4-8 Runner is Safe 1 FO7 Triple play 7 Left fielder (LF) Base Double steals Table D8 2 FO5 1-2 TP 8 Center fielder (CF) 1-3 Lead runner is out 3 FO9 3-4 DP 9 Right fielder (RF) 4-5 Trailing runner is out 4 FO3 5-6 Single Out 6-8 Both runners reach safely 5-12 Foul Hit Table D20 Hit If Out Out Table 1 1-6 Foul ball Roll a D12 (Foul Table) Groundout to First (G-3) Roll a D6 Groundout to Second Base (4-3) Groundout to Third Base (5-3) 7-8 Pop Out P-D6 Number Groundout to Short (6-3) Ex. P1 Groundout to Pitcher (1-3) Single, Roll a D6 9-12 Groundout Groundout to Catcher (2-3) See Single Table Pop Out Pitcher (P1) 13 Single No Out Pop Out Catcher (P2) 14 Double, DEF (LF) F7 Fly out to Left Field (F7) 15 Double, DEF (CF) F8 Fly out to Center Field (F8) 16 Double, DEF (RF) F9 Fly out to Right Field (F9) 17 Double No Out Double Play (DP) Triple, Roll a D4, Triple Play (TP) 18 1-2 DEF RF F8 or F9 Error (E) 3-4 DEF CF 19-20 Home Run (HR) No Out Single Table D6 IF Out Defense (D12) 1 DEF (1B) 1-2 Error Runners take an extra base.
    [Show full text]
  • TEE Internal Core API Specification V1.1.2.50
    GlobalPlatform Technology TEE Internal Core API Specification Version 1.1.2.50 (Target v1.2) Public Review June 2018 Document Reference: GPD_SPE_010 Copyright 2011-2018 GlobalPlatform, Inc. All Rights Reserved. Recipients of this document are invited to submit, with their comments, notification of any relevant patents or other intellectual property rights (collectively, “IPR”) of which they may be aware which might be necessarily infringed by the implementation of the specification or other work product set forth in this document, and to provide supporting documentation. The technology provided or described herein is subject to updates, revisions, and extensions by GlobalPlatform. This documentation is currently in draft form and is being reviewed and enhanced by the Committees and Working Groups of GlobalPlatform. Use of this information is governed by the GlobalPlatform license agreement and any use inconsistent with that agreement is strictly prohibited. TEE Internal Core API Specification – Public Review v1.1.2.50 (Target v1.2) THIS SPECIFICATION OR OTHER WORK PRODUCT IS BEING OFFERED WITHOUT ANY WARRANTY WHATSOEVER, AND IN PARTICULAR, ANY WARRANTY OF NON-INFRINGEMENT IS EXPRESSLY DISCLAIMED. ANY IMPLEMENTATION OF THIS SPECIFICATION OR OTHER WORK PRODUCT SHALL BE MADE ENTIRELY AT THE IMPLEMENTER’S OWN RISK, AND NEITHER THE COMPANY, NOR ANY OF ITS MEMBERS OR SUBMITTERS, SHALL HAVE ANY LIABILITY WHATSOEVER TO ANY IMPLEMENTER OR THIRD PARTY FOR ANY DAMAGES OF ANY NATURE WHATSOEVER DIRECTLY OR INDIRECTLY ARISING FROM THE IMPLEMENTATION OF THIS SPECIFICATION OR OTHER WORK PRODUCT. Copyright 2011-2018 GlobalPlatform, Inc. All Rights Reserved. The technology provided or described herein is subject to updates, revisions, and extensions by GlobalPlatform.
    [Show full text]
  • Iscore Baseball | Training
    | Follow us Login Baseball Basketball Football Soccer To view a completed Scorebook (2004 ALCS Game 7), click the image to the right. NOTE: You must have a PDF Viewer to view the sample. Play Description Scorebook Box Picture / Details Typical batter making an out. Strike boxes will be white for strike looking, yellow for foul balls, and red for swinging strikes. Typical batter getting a hit and going on to score Ways for Batter to make an out Scorebook Out Type Additional Comments Scorebook Out Type Additional Comments Box Strikeout Count was full, 3rd out of inning Looking Strikeout Count full, swinging strikeout, 2nd out of inning Swinging Fly Out Fly out to left field, 1st out of inning Ground Out Ground out to shortstop, 1-0 count, 2nd out of inning Unassisted Unassisted ground out to first baseman, ending the inning Ground Out Double Play Batter hit into a 1-6-3 double play (DP1-6-3) Batter hit into a triple play. In this case, a line drive to short stop, he stepped on Triple Play bag at second and threw to first. Line Drive Out Line drive out to shortstop (just shows position number). First out of inning. Infield Fly Rule Infield Fly Rule. Second out of inning. Batter tried for a bunt base hit, but was thrown out by catcher to first base (2- Bunt Out 3). Sacrifice fly to center field. One RBI (blue dot), 2nd out of inning. Three foul Sacrifice Fly balls during at bat - really worked for it. Sacrifice Bunt Sacrifice bunt to advance a runner.
    [Show full text]
  • Domain Tips and Tricks Lab
    Installing a Domain Service for Windows: Domain Tips and Tricks Lab Novell Training Services www.novell.com OES10 ATT LIVE 2012 LAS VEGAS Novell, Inc. Copyright 2012-ATT LIVE-1-HARDCOPY PERMITTED. NO OTHER PRINTING, COPYING, OR DISTRIBUTION ALLOWED. Legal Notices Novell, Inc., makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc., reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes. Further, Novell, Inc., makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc., reserves the right to make changes to any and all parts of Novell software, at any time, without any obligation to notify any person or entity of such changes. Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses.
    [Show full text]
  • Show Command Output Redirection
    show Command Output Redirection The show Command Output Redirection feature provides the capability to redirect output from Cisco IOS command-line interface (CLI) show commands and more commands to a file. • Finding Feature Information, page 1 • Information About show Command Output Redirection, page 1 • How to Use the show Command Enhancement, page 2 • Additional References, page 2 • Feature Information for show Command Output Redirection, page 3 Finding Feature Information Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required. Information About show Command Output Redirection This feature enhances the show commands in the Cisco IOS CLI to allow large amounts of data output to be written directly to a file for later reference. This file can be saved on local or remote storage devices such as Flash, a SAN Disk, or an external memory device. For each show command issued, a new file can be created, or the output can be appended to an existing file. Command output can optionally be displayed on-screen while being redirected to a file by using the tee keyword.
    [Show full text]
  • Baseball/Softball
    July2006 ?fe Aatuated ScowS& For Basebatt/Softbatt Quick Keys: Batter keywords: Press this: To perform this menu function: Keyword: Situation: Keyword: Situation: a.Lt*s Balancescoresheet IB Single SAC Sacrificebunt ALT+D Show defense 2B Double SF Sacrifice fly eLt*B Edit plays 3B Triple RBI# # Runs batted in RLt*n Savea gamefile to disk HR Home run DP Hit into doubleplay crnl*n Load a gamefile from disk BB Walk GDP Groundedinto doubleplay alr*I Inning-by-inning summary IBB Intentionalwalk TP Hit into triple play nlr*r Lineupcards HP Hit by pitch PB Reachedon passedball crRL*t List substitutions FC Fielder'schoice WP Reachedon wild pitch alr*o Optionswindow CI Catcher interference E# Reachon error by # ALT+N Gamenotes window BI Batter interference BU,GR Bunt, ground-ruledouble nll*p Playswindow E# Reachedon error by DF Droppedfoul ball ALr*g Quit the program F# Flied out to # + Advanced I base alr*n Rosterwindow P# Poppedup to # -r-r Advanced2 bases CTRL+R Rosterwindow (edit profiles) L# Lined out to # +++ Advanced3 bases a,lr*s Statisticswindow FF# Fouledout to # +T Advancedon throw 4 J-l eLt*:t Turn the scoresheetpage tt- tt Groundedout # to # +E Advanced on effor l+1+1+ .ALr*u Updatestat counts trtrft Out with assists A# Assistto # p4 Sendbox score(to remotedisplay) #UA Unassistedputout O:# Setouts to # Ff, Edit defensivelineup K Struck out B:# Set batter to # F6 Pitchingchange KS Struck out swinging R:#,b Placebatter # on baseb r7 Pinchhitter KL Struck out looking t# Infield fly to # p8 Edit offensivelineup r9 Print the currentwindow alr*n1 Displayquick keyslist Runner keywords: nlr*p2 Displaymenu keys list Keyword: Situation: Keyword: Situation: SB Stolenbase + Adv one base Hit locations: PB Adv on passedball ++ Adv two bases WP Adv on wild pitch +++ Adv threebases Ke1+vord: Description: BK Adv on balk +E Adv on error 1..9 PositionsI thru 9 (p thru rf) CS Caughtstealing +E# Adv on error by # P.
    [Show full text]
  • APPENDIX a Aegis and Unix Commands
    APPENDIX A Aegis and Unix Commands FUNCTION AEGIS BSD4.2 SYSS ACCESS CONTROL AND SECURITY change file protection modes edacl chmod chmod change group edacl chgrp chgrp change owner edacl chown chown change password chpass passwd passwd print user + group ids pst, lusr groups id +names set file-creation mode mask edacl, umask umask umask show current permissions acl -all Is -I Is -I DIRECTORY CONTROL create a directory crd mkdir mkdir compare two directories cmt diff dircmp delete a directory (empty) dlt rmdir rmdir delete a directory (not empty) dlt rm -r rm -r list contents of a directory ld Is -I Is -I move up one directory wd \ cd .. cd .. or wd .. move up two directories wd \\ cd . ./ .. cd . ./ .. print working directory wd pwd pwd set to network root wd II cd II cd II set working directory wd cd cd set working directory home wd- cd cd show naming directory nd printenv echo $HOME $HOME FILE CONTROL change format of text file chpat newform compare two files emf cmp cmp concatenate a file catf cat cat copy a file cpf cp cp Using and Administering an Apollo Network 265 copy std input to std output tee tee tee + files create a (symbolic) link crl In -s In -s delete a file dlf rm rm maintain an archive a ref ar ar move a file mvf mv mv dump a file dmpf od od print checksum and block- salvol -a sum sum -count of file rename a file chn mv mv search a file for a pattern fpat grep grep search or reject lines cmsrf comm comm common to 2 sorted files translate characters tic tr tr SHELL SCRIPT TOOLS condition evaluation tools existf test test
    [Show full text]
  • Installation Instruction
    Rev 1/2020 Installation Instruction Please read the instructions completely before beginning the installation. Circ Collection Model Number: 3920CI Flush both supply lines before installation, then shut off both supply lines. Minimum hole size for the spout and handle trim is 1-1/4” and maximum of 1-1/2” SPOUT INSTALLATION 1 - Remove the tee connector, spout mounting hardware and tee connector washer from the bottom of the spout assembly. Apply a ring of silicon caulking around the center hole on the top of the sink. Do not use plumbers' putty which can damage the finish of the faucet. - From the top of the deck, insert the spout's threaded shank through the center hole of the sink. Make sure the spout flange washer is properly placed underneath of the flange and gently pressed against the sink top. Rubber washer 2 - Slip the spout mounting hardware back onto the spout. First the notched rubber washer, then the notched metal washer and lastly the brass lock nut. Hand tighten the lock nut. - Tighten the lock nut. Make sure the spout does not move side ways Adjust it if necessary. - Place the tee connector washer into the tee connector and thread the tee connector onto the end of the spout shank. Tighten to seal. - Align the spout and tighten the shank lock nut firmly. Notched rubber washer Notched metal washer Spout stabilizer Brass lock nut Tee connector washer Tee connector The measurements shown are for reference only. Products and specifications shown are subject to change without notice. www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 1/7 HANDLE TRIM INSTALLATION DO NOT DISASSEMBLE HANDLE ASSEMBLY - DROP-IN VALVES 1 - Both hot and cold side handle trims are pre-assmbled for faster installation.
    [Show full text]
  • Keep TEE Probe Care Top-Of-Mind
    Keep TEE Probe Care Top-Of-Mind Three Ways to Prevent Catastrophic TEE Probe Failures 1. Perform Frequent Quality Visual Inspections • When removed from storage • During removal • Before soaking in disinfectant • When set-up and connected to the scanner • After removal • After soaking in disinfectant • Before insertion • During pre-cleaning • Before storing 2. Perform Frequent and Time-based Leakage Testing Frequent • After EVERY patient exam, following a thorough visual inspection, under magnification, and prior to lengthy soak in disinfectant Time-based • Test once at the beginning of the soak cycle and once again at the end in order to reveal intermittent, slow leaks (the beginning of hard, catastrophic failures) 3. Establish a TEE Probe Preventative Maintenance Program • Address wearable items before they can contribute to larger, costly failures • Restore optimal performance and maintain uptime • Extend TEE probe lifecycyle • Suggested Intervals: • Bending rubber replacement - every 6-12 months • Articulation adjustment - every 6-12 months • Re-coating/re-labeling - every 12-18 months Industry Best-Practices for TEE Probe Care and Handling • Always use a protective tip cover when the probe is outside of the patient • Always transport TEE probes in covered bins • Don't coil the insertion tube in less than a 12-inch diameter • Use a TEE bite guard on every patient • Anytime a probe changes hands, perform a quick visual inspection of the tip, bending section and insertion tube. See below • Thoroughly inspect the tip and bending section,
    [Show full text]
  • CS2043 - Unix Tools & Scripting Cornell University, Spring 20141
    CS2043 - Unix Tools & Scripting Cornell University, Spring 20141 Instructor: Bruno Abrahao January 31, 2014 1 Slides evolved from previous versions by Hussam Abu-Libdeh and David Slater Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Vim: Tip of the day! Line numbers Displays line number in Vim: :set nu Hides line number in Vim: :set nonu Goes to line number: :line number Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Counting wc How many lines of code are in my new awesome program? How many words are in this document? Good for bragging rights Word, Character, Line, and Byte count with wc wc -l : count the number of lines wc -w : count the number of words wc -m : count the number of characters wc -c : count the number of bytes Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Sorting sort Sorts the lines of a text file alphabetically. sort -ru file sorts the file in reverse order and deletes duplicate lines. sort -n -k 2 -t : file sorts the file numerically by using the second column, separated by a colon Example Consider a file (numbers.txt) with the numbers 1, 5, 8, 11, 62 each on a separate line, then: $ sort numbers.txt $ sort numbers.txt -n 1 1 11 5 5 8 62 11 8 62 Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting uniq uniq uniq file - Discards all but one of successive identical lines uniq -c file - Prints the number of successive identical lines next to each line Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Character manipulation! The Translate Command tr [options] <char_list1> [char_list2] Translate or delete characters char lists are strings of characters By default, searches for characters in char list1 and replaces them with the ones that occupy the same position in char list2 Example: tr 'AEIOU' 'aeiou' - changes all capital vowels to lower case vowels Instructor: Bruno Abrahao CS2043 - Unix Tools & Scripting Pipes and redirection tr only receives input from standard input (stdin) i.e.
    [Show full text]
  • TEE Management Framework V1.0
    GlobalPlatform Device Technology TEE Management Framework Version 1.0 Public Release November 2016 Document Reference: GPD_SPE_120 Copyright 2012-2016 GlobalPlatform, Inc. All Rights Reserved. Recipients of this document are invited to submit, with their comments, notification of any relevant patents or other intellectual property rights (collectively, “IPR”) of which they may be aware which might be necessarily infringed by the implementation of the specification or other work product set forth in this document, and to provide supporting documentation. The technology provided or described herein is subject to updates, revisions, and extensions by GlobalPlatform. Use of this information is governed by the GlobalPlatform license agreement and any use inconsistent with that agreement is strictly prohibited. TEE Management Framework – Public Release v1.0 THIS SPECIFICATION OR OTHER WORK PRODUCT IS BEING OFFERED WITHOUT ANY WARRANTY WHATSOEVER, AND IN PARTICULAR, ANY WARRANTY OF NON-INFRINGEMENT IS EXPRESSLY DISCLAIMED. ANY IMPLEMENTATION OF THIS SPECIFICATION OR OTHER WORK PRODUCT SHALL BE MADE ENTIRELY AT THE IMPLEMENTER’S OWN RISK, AND NEITHER THE COMPANY, NOR ANY OF ITS MEMBERS OR SUBMITTERS, SHALL HAVE ANY LIABILITY WHATSOEVER TO ANY IMPLEMENTER OR THIRD PARTY FOR ANY DAMAGES OF ANY NATURE WHATSOEVER DIRECTLY OR INDIRECTLY ARISING FROM THE IMPLEMENTATION OF THIS SPECIFICATION OR OTHER WORK PRODUCT. Copyright 2012-2016 GlobalPlatform, Inc. All Rights Reserved. The technology provided or described herein is subject to updates, revisions, and extensions by GlobalPlatform. Use of this information is governed by the GlobalPlatform license agreement and any use inconsistent with that agreement is strictly prohibited. TEE Management Framework – Public Release v1.0 3 / 228 Contents 1 Introduction .........................................................................................................................
    [Show full text]
  • Triple Play Tournaments 2016 Triple Play Tournaments Prides Itself in Running Very Organized Tournaments at a Great Value for Youth Baseball Teams
    Triple Play Tournaments 2016 Triple Play Tournaments prides itself in running very organized tournaments at a great value for youth baseball teams. All tournaments will be held at local St. Charles County and St. Louis County fields including C&H Ballpark, Woodlands Ballpark, Bridgeton Municipal Athletic Complex (BMAC), and Pacific Athletic Association, other local parks and high school fields may be used for some tournaments. Team Name Age Level Division: A AA AAA Major (Circle One) Head Coach Address Coach’s Email Coach’s Cell Month Dates Ages Divisions Event Ball Park Min Entry Select Games Fee Tournament(s) March 18-20 7u-14u A, AA, AAA Opening Day Classic C & H 4 $375 April 8-10 7u-14u A, AA, AAA Spring Time Classic C & H/ BMAC 3 $375 April 15-17 7u-14u A, AA, AAA Moon Shot Rumble C&H/ STP Sports Complex 3 $375 April 29-5/1 7u-14u A, AA, AAA On the Bump Classic C & H/STP Sports Complex 3 $375 May 13-15 7u-14u A, AA, AAA Swing for the Fences Battle C & H/STP Sports Complex 3 $375 May 14 -15 7u-14u A/Rec Only Spring Fling Pacific 3 $375 May 20-22 7u-18u A, AA, AAA Hot Corner Classic C & H/ BMAC 3 $375 June 3-5 7u-18u A, AA, AAA School’s Out Classic C & H/ TBD 3 $375 June 4-5 7u-18u AA Only June Showdown Pacific 3 $375 June 10-12 7u-18u A, AA, AAA Wood Bat Battle C & H/TBD 3 $375 June 17-19 7u-18u A, AA, AAA Father’s Day Classic C & H/TBD 3 $375 June 24-26 7u-18u A, AA, AAA RBI Bonanza C & H/TBD 3 $375 July 8-10 7u-18u A, AA, AAA July Showdown C & H/Woodlands 3 $375 July 15-17 7u-18u A,AA,AAA Triple Play World Series C&H/ Woodlands
    [Show full text]