DOCSLIB.ORG

HAZET Torque Wrench – No Extension Necessary

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
HAZET Torque Wrench – No Extension Necessary CATALOG OCTOBER 2021 IMPACT SOCKETS AND ACCESSORIES CATALOG IMPACT SOCKETS AND ACCESSORIES ADAPTER 1/4" - 1/4" Application: Connecting sockets with square drive according to DIN 3120 and operating tools with 6-point drive. • Adapter Outside square 6.3 = 1/4" – Outside hexagon 6.3 = 1/4". • Clamping ball. • Surface: phosphatized, oiled. • Drive: ... CODE 2304 PRICE € 16,99 ADAPTER 3/8" - 1/2" Application: Connecting sockets with square drive according to DIN 3120 and operating tools with 6-point drive. • Adapter Outside square 12.5 = 1/2" – Outside hexagon 10 = 3/8". • Clamping ball. • Surface: phosphatized, oiled. • Drive: ... CODE 2311 PRICE € 17,04 AMPLIFIER IMPACT 1/2"-3/4" WITH BOREHOLE • Outside square Drive 20 = 3/4" – Inside square (Robertson) drive 12.5 = 1/2". • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Square, hollow 12.5 mm ... CODE 9007S-1 PRICE € 17,47 CATALOG IMPACT SOCKETS AND ACCESSORIES AMPLIFIER IMPACT 3/8" - 1/2" • Outside square Drive 12.5 = 1/2" – Inside square (Robertson) drive 10 = 3/8". • Drive with borehole for locking pin retaining and grove for O-ring, output with locking pin retaining. • Surface: phosphatized, oiled. • Made in Germany. ... CODE 8807S-1 PRICE € 14,17 BIT 5/16" TORX® • Screwdriver bit TORX® T 45 for 2597 - Installing and removing the doors on VW , AUDI , ŠKODA. • Hexagon drive ISO 1173 C8 (5/16"). • Drive: Hexagon, solid 8 (5/16 inches). • Output: Inside TORX® profile. • Wrench size: , T45. • Dime ... CODE 2597-01 PRICE € 8,11 HEXAGON BIT 1/4″ • Hexagon bit 6.3 mm (1/4"). • Output: Hexagon, hollow 6.3 (1/4 inch). CODE 9023M-1-B PRICE € 17,42 IMPACT ADAPTER 1/4" • Made in Germany. • For impact operation. CODE 8508S-1 8508S-3 8508S-4 PRICE € 16,60 € 14,56 € 18,63 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT ADAPTER 3/4" • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • For impact operation. CODE 1007S-1 1007S-2 PRICE € 32,65 € 38,15 BIT 5/16" XZN • Similar to DIN 65254. • Hexagon drive ISO 1173 C8 (5/16"). • Made in Germany. • Drive: Hexagon, solid 8 (5/16 inches). • Output: Internal serration profile XZN. • Wrench size: , M10. • Special purpose steel for excessive use. • Hig ... CODE 2597-02 2597-03 PRICE € 8,11 € 8,30 IMPACT ADAPTER 1/2" • Outside hexagon 24 mm – Outside square drive 12.5 = 1/2". • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Outside hexagon 24 mm. • Output: Square, s ... CODE 1003S-07 PRICE € 15,05 IMPACT ADAPTER 3/4" • Operating impact and power screwdriver sockets 900 SZ 6 , 903 SZ 6 , 985 S , 990 S , 1003 S-07. • Inside square (Robertson) Drive 20 = 3/4" – Inside hexagon 24 mm. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Squ ... CODE 1003S-1 PRICE € 22,81 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT ADAPTER 3/8" • Fixation of power screwdriver sockets with Inside square (Robertson) drive 10 = 3/8". • With locking pin retaining. • Surface: steel grey, oiled. • Made in Germany. • Drive: Hexagon, solid 8 (5/16 inches). • Output: Square, solid 10 m ... CODE 8808S-1 PRICE € 25,92 IMPACT BALL JOINT 1" • With hinge - for working in areas with restricted access and for getting around obstructive edges. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: burnished, oiled. • Made in Germany. • Drive: Square, hol ... CODE 1106S PRICE € 131,89 IMPACT EXTENSION 1/4" • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • For impact operation. CODE 8505S-2 8505S-6 PRICE € 11,56 € 13,83 PLASTIC SLEEVE FOR 903 S • Made in Germany. • For impact operation. CODE 903SLG-015 903SLG-017 903SLG-019 903SLG-021 903SLG-022 PRICE € 10,82 € 5,48 € 5,48 € 5,48 € 5,48 CATALOG IMPACT SOCKETS AND ACCESSORIES PLASTIC SLEEVE FOR 904 S • Made in Germany. • For impact operation. CODE 904SLG-017 904SLG-019 PRICE € 10,72 € 10,33 PLASTIC SLEEVE FOR 905 S • Made in Germany. • For impact operation. CODE 905SLG-017 905SLG-021 PRICE € 5,34 € 5,20 IMPACT BALL JOINT 1/2" WITH BOREHOLE • Angular movement 25°. • With hinge - for working in areas with restricted access and for getting around obstructive edges. • With borehole for locking pin or safety spring and grove for O- ring. • Surface: burnished, oiled. • Made in Germ ... CODE 9006S PRICE € 53,37 IMPACT BALL JOINT 3/4" • With hinge - for working in areas with restricted access and for getting around obstructive edges. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: burnished, oiled. • Made in Germany. • Drive: Square, hol ... CODE 1006S PRICE € 87,58 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT BALL JOINT 3/8" • With hinge - for working in areas with restricted access and for getting around obstructive edges. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: burnished, oiled. • Made in Germany. • Drive: Square, hol ... CODE 8806S PRICE € 32,07 IMPACT EXTENSION 1" • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Square, hollow 25 mm (1 inch). • Output: Square, solid 25 mm (1 inch). • For impact operation. CODE 1105S-13 1105S-7 PRICE € 117,23 € 92,34 IMPACT EXTENSION 1/2" WITH BOREHOLE • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Square, hollow 12.5 mm (1/2 inch). • Output: Square, solid 12.5 mm (1/2 inch). • Dimensions / length: 130 m ... CODE 9005S-5 PRICE € 32,52 SQUARE SOCKET 1/4″ • Square socket 6.3 mm (1/4"). • Output: Square, solid 6.3 mm (1/4 inch). CODE 9023M-1-020 PRICE € 17,42 CATALOG IMPACT SOCKETS AND ACCESSORIES SQUARE SOCKET 3/8″ • Square socket 10 mm (3/8"). • Output: Square, solid 10 mm (3/8 inch). CODE 9023M-1-021 PRICE € 17,42 IMPACT EXTENSION 3/4" • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Square, hollow 20 mm (3/4 inch). • For impact operation. CODE 1005S-13 1005S-7 PRICE € 102,58 € 60,66 IMPACT EXTENSION 3/8" WITH LOCKING PIN RETAINING • With locking pin retaining. • Surface: phosphatized, oiled. • Made in Germany. • For impact operation. CODE 8805S-3 8805S-6 PRICE € 14,47 € 19,84 IMPACT SCREWDRIVER SOCKET HEXAGONAL LONG SQUARE 1/2" WITH BOREHOLE Application: For screw connections on commercial vehicles and cars, e.g. on chassis, brake system (brake carriers), engines and shock absorbers. • Drive optionally with - Inside square (Robertson) 12.5 mm = 1/2" or - Outside hexagon 24 mm, • ... CODE 985S-14LG 985S-17LG 985S-19LG PRICE € 16,65 € 16,93 € 17,38 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT SCREWDRIVER SOCKET HEXAGONAL SHORT SQUARE 1/2" WITH BOREHOLE Application: For screw connections on commercial vehicles and cars, e.g. on chassis, brake system (brake carriers), engines and shock absorbers. • Drive optionally with - Inside square (Robertson) 12.5 mm = 1/2" or - Outside hexagon 24 mm, • ... CODE 985S-14 985S-17 985S-19 985S-22 985S-24 PRICE € 14,47 € 14,99 € 15,14 € 17,47 € 17,77 IMPACT SCREWDRIVER SOCKET SERRATION PROFILE XZN SQUARE 1/2" LONG • Choice of Inside square (Robertson) drive 12.5 = 1/2" or - Outside hexagon 24 mm. • Long design. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Squar ... CODE 990S-14LG 990S-16LG 990S-18LG PRICE € 15,53 € 15,77 € 15,83 IMPACT SCREWDRIVER SOCKET SERRATION PROFILE XZN SQUARE 1/2" SHORT • Choice of Inside square (Robertson) drive 12.5 = 1/2" or - Outside hexagon 24 mm. • Short design. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Squa ... CODE 990S-14 990S-16 990S-18 PRICE € 13,97 € 14,02 € 14,12 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT SOCKET 6-POINT EXTRA LONG SQUARE 1/2" WITH TRACTION PROFILE FOR WHEEL MOUNTING AND DISMOUNTING • Safe distance from wing when screwing closed with HAZET torque wrench – no extension necessary. • Outside plastic sleeve (rotatable) to protect the rim. • Extra long design. • With borehole for locking pin or safety spring and grove for O ... CODE 904SLG-17 904SLG-19 904SLG-21 PRICE € 51,82 € 51,82 € 52,02 IMPACT SOCKET 6-POINT EXTRA SHORT SQUARE 1/2" WITH TRACTION PROFILE WITH BOREHOLE • Extra short design. • With borehole for locking pin or safety spring and grove for O-ring. • Surface: phosphatized, oiled. • Made in Germany. • Drive: Square, hollow 12.5 mm (1/2 inch). • Output: Outside hexagon Traction profile. • For impact operation. CODE 900SK-13 900SK-17 900SK-19 900SK-21 PRICE € 5,73 € 7,09 € 12,77 € 12,96 IMPACT SOCKET 6-POINT EXTRA SLIM AND LONG SQUARE 1/2" WITH TRACTION PROFILE FOR WHEEL MOUNTING OR DISMOUNTING Application: Especially for wheel mounting or dismounting. • Plastic insert - to protect the surface of the wheel bolts. • Extra slim style. • Long design. • With borehole for locking pin or safety spring and grove for O-ring. • Made in Ger ... CODE 902SLG-17 902SLG-19 PRICE € 21,54 € 21,20 CATALOG IMPACT SOCKETS AND ACCESSORIES IMPACT SOCKET 6-POINT EXTRA SLIM AND LONG SQUARE 1/2" WITH TRACTION PROFILE FOR WHEEL MOUNTING OR DISMOUNTING • Especially for wheel mounting or dismounting. • Extra slim style. • Long design. • With borehole for locking pin or safety spring and grove for O-ring.
Load more

Recommended publications
  • Taylor's Residential Series™ Test Kits
    Taylor’s Residential Series™ Test Kits INTRODUCTION aylor’s Residential Series™ test kits are designed for spa and pool owners who have low bather loads and test their water between visits from a service technician Tor trips to their pool supplies store. This series uses the same quality reagents as Taylor’s kits for professional analysts. Buyers have a choice of three progressively more sophisticated models: 3-Way, 6-Way, and 9-Way, as described below. Every Residential kit is available in our classic case—the solid blue, injection-molded plastic kit which is so durable it The K-1004 6-Way DPD kit monitors three variables that impact water can be refilled season after season. Tabs on every case make quality so problems can be detected and treated early, with less them easy to hang from hooks. expense. Residential kits feature .75 oz. reagents color-coded to 3-WAY (DPD) instructions; sanitizer values for both chlorine and bromine Free Chlorine .25–2.5 ppm testing; five sets of printed-color standards encased in Total Bromine .5–5 ppm plastic for longevity (calibrated to work with Taylor pH pH 6.8–8.2 reagents R-0014, R-0015, and R-0016); and molded fill English: K-1101 lines to ensure the correct sample size. Spanish: K-1101S Instructions are written in clear, nontechnical terms and Spanish version is available in a case pack of twelve (K-1101S-12) include pictograms for ease of following steps. Instruction 6-WAY (OT) cards printed on waterproof paper that resists fading and Total Chlorine .5–5 ppm tearing.
    [Show full text]
  • Mechanical Keyswitch B3F
    Mechanical Keyswitch B3F Miniature, Space-Saving Keyswitch Provides Long Service Life and Easy Mounting ■ Extended mechanical/electrical service life: 10 x 106 operations for 12 x 12 mm type and 1 x 106 operations for the 6 x 6 mm type ■ Ideal for applications such as audio, office and communications equipment, measuring instruments, TVs, VCRs, etc. ■ Taped radial type, vertical type, high force type, and gold-plated contact type are available as series versions ■ Flux-tight base structure allows automatic soldering of the keyswitches onto a PC board Ordering Information Flat Projected ■ B3F-1■■■, B3F-3■■■ 6 x 6 mm type Part Number Switch Without ground terminal With ground terminal Type Plunger height x pitch Operating Force Bags Sticks* Bags Sticks* Standard Flat 4.3 x 6.5 mm General-purpose: 100 g B3F-1000 B3F-1000S B3F-1100 B3F-1100S 150 g B3F-1002 B3F-1002S B3F-1102 B3F-1102S High-force: 260 g B3F-1005 B3F-1005S B3F-1105 B3F-1105S 5.0 x 6.5 mm General-purpose: 100 g B3F-1020 B3F-1020S B3F-1120 B3F-1120S 150 g B3F-1022 B3F-1022S B3F-1122 B3F-1122S High-force: 260 g B3F-1025 B3F-1025S B3F-1125 B3F-1125S 5.0 x 7.5 mm General-purpose: 100 g — — B3F-1110 — Projected 7.3 x 6.5 mm General-purpose: 100 g B3F-1050 B3F-1050S B3F-1150 B3F-1150S 150 g B3F-1052 B3F-1052S B3F-1152 B3F-1152S High-force: 260 g B3F-1055 B3F-1055S B3F-1155 B3F-1155S Vertical Flat 3.15 mm General-purpose: 100 g — — B3F-3100 — 150 g — — B3F-3102 — High-force: 260 g — — B3F-3105 — 3.85 mm General-purpose: 100 g — — B3F-3120 — 150 g — — B3F-3122 — High-force: 260 g — — B3F-3125 — Projected 6.15 mm General-purpose: 100 g — — B3F-3150 — 150 g — — B3F-3152 — High-force: 260 g — — B3F-3155 — * Number of switches per stick: Without ground terminal ...
    [Show full text]
  • Bridge Index
    Co Br# Page Facility Carried Featured Intersedtion Co Br# Page Facility Carried Featured Intersedtion 1 001 12 2-G RISING SUN RD BRANDYWINE CREEK 1 087 9 10-C SNUFF MILL RD BURRIS RUN 1 001A 12 2-G RISING SUN RD BRANDYWINE CREEK 1 088 9 10-C SNUFF MILL RD TRIB OF RED CLAY CREEK 1 001B 12 2-F KENNETT PIKE WATERWAY & ABANDON RR 1 089 9 10-C SNUFF MILL RD. WATERWAY 1 002 9 12-G ROCKLAND RD BRANDYWINE CREEK 1 090 9 10-C SNUFF MILL RD. WATERWAY 1 003 9 11-G THOMPSON BRIDGE RD BRANDYWINE CREEK 1 091 9 10-C SNUFF MILL RD. WATERWAY 1 004P 13 3-B PEDESTRIAN NORTHEAST BLVD 1 092 9 11-E KENNET PIKE (DE 52) 1 006P 12 4-G PEDESTRIAN UNION STREET 1 093 9 10-D SNUFF MILL RD WATERWAY 1 007P 11 8-H PEDESTRIAN OGLETOWN STANTON RD 1 096 9 11-D OLD KENNETT ROAD WATERWAY 1 008 9 9-G BEAVER VALLEY RD. BEAVER VALLEY CREEK 1 097 9 11-C OLD KENNETT ROAD WATERWAY 1 009 9 9-G SMITHS BRIDGE RD BRANDYWINE CREEK 1 098 9 11-C OLD KENNETT ROAD WATERWAY 1 010P 10 12-F PEDESTRIAN I 495 NB 1 099 9 11-C OLD KENNETT RD WATERWAY 1 011N 12 1-H SR 141NB RD 232, ROCKLAND ROAD 1 100 9 10-C OLD KENNETT RD. WATERWAY 1 011S 12 1-H SR 141SB RD 232, ROCKLAND ROAD 1 105 9 12-C GRAVES MILL RD TRIB OF RED CLAY CREEK 1 012 9 10-H WOODLAWN RD.
    [Show full text]
  • The Church Grows in Power. Essential Question
    Big Idea The Church grows in power. Essential Question How did the Church gain power in Medieval Europe? Words To Know Secular – this means not-religious. Canon Laws – laws developed by the Church, based on the bible. Excommunication – the limiting or ending of a person’s membership in the Catholic Church. Holy Sacraments – sacred ceremonies of the church. Interdict – an order or ban from the church preventing a person or group of people from receiving holy sacraments in the Catholic Church. Words To Know Papal Supremacy – the authority or power of the Pope over all secular rulers (non religious rulers, including kings and emperors). Let’s Set The Stage… After the fall of the Roman Empire, western Europe broke into small warring kingdoms. Since it was the official church of the Roman Empire, most people in Western Europe were Christians. The Church owned a great deal of wealth and land. It became the most important unifying and stabilizing force in western Europe during the Middle Ages. The power vacuum left by the Roman Empire was filled by the Catholic Church. The Power of the Church The church was the center of medieval life in western Europe. Almost every village and town had a church building. Church bells rang out the hours, called people to worship and warned of danger. Over the course of the early Middle Ages, the Catholic Church became more influential and powerful, to the point where the Church and the beliefs of its clergy [people who had high positions in the Church like priests and bishops] controlled secular [non-religious] life and secular government.
    [Show full text]
  • Department of Housing and Economic Development Employee Directory
    Department of Housing and Economic Development Employee Directory Name Number Name Number Name Number HED Main Reception ADMINISTRATION Bureau of HOUSING 744-4190 City Hall - Room 1000 City Hall - Room 1003 Eager, Bill 744-9475 Sulewski, Patricia 744-6926 Customer Service 744-3653 Murawski, Peter 744-6228 Housing Preservation City Hall - Room 1006 EXECUTIVE OFFICE Human Resources (HR) Brutus, Patrick 744-7077 City Hall - Room 1000 Cannon, Angela 744-9610 Colinet, Ketsia 744-0141 Mooney, Andrew 744-9476 Henry, Amy 744-6330 Cowan, Darlene 744-9613 Gempeler, Amy 744-4133 Rodriguez, Betra 744-9061 Harrison, Kimberley 744-9782 Quesada, Yolanda 744-9362 Ryan, Lenore 744-4180 Lewis, Edward 744-4461 Wilson, Lynette 744-9445 Thomas, Hattie 744-8282 Ludwig, Katie 744-0268 IT/GIS/Research Simpkins, Anthony 744-9777 Bureau of Housing Ahmed, Rizwana 744-7222 Smith, Angelique 744-1082 Eager, Bill 744-9475 Hague, Robert 744-5204 Homeownership Center Sulewski, Patricia 744-6926 Imparl, Paul 744-9234 City Hall - Room 1006 Karnuth, John 744-0263 Alarcon, Luis 744-0835 Bureau of Economic Development Perry, Susan 744-4154 Barth, Leona 744-0891 Jasso, Michael 744-0771 Phillips, Stavros 744-2714 Baxter, Marcia 744-0696 Castillo, Isabel (Liz) 744-0919 Raya, Josephine 744-0756 Breems, Kara 744-6746 Scales, Cherie 744-0844 Daniels, Alberta 744-0857 Bureau of Planning & Zoning Williams, Cora 744-0894 Davis, Anita 744-0841 City Hall - Room 905 Office Operations Gibson, Regina 744-0070 Scudiero, Patti 744-5765 Davis, Lance 744-2075 Hall, Jonathan 744-0826 Reblin,
    [Show full text]
  • Electric Actuators Vsi-1000 Series
    ELECTRIC ACTUATORS TM VSI-1000 SERIES DESCRIPTION VSI-1000 Series Electric Actuators are used on Kele KBV Series butterfly valves to provide two-position (with or without battery backup) or proportional control in a NEMA 4X housing. The VSI-1000 Series comes standard on 8" and larger non-spring return assemblies and on 5" and larger two- position spring return assemblies. They can be ordered on smaller valve assemblies as an option. Standard fea- tures include 2 SPDT fully adjustable auxiliary switches KBV-2-6-E2SO (two-position only), manual override crank, and an inter- assembly includes nal heater to prevent condensation in outdoor installa- VSI-BB1020 actuator tions. SPECIFICATIONS FEATURES Power 120 VAC standard •Lightweight, compact design Models 1005 to 1020 12/24 VDC optional • Two-position or modulating control Models 1005 to 1040 24 VAC optional • Two-position battery-backed models Torque range 347-17,359 in-lb • NEMA 4X watertight, corrosion-resistant housing Motor 120 VAC, 1 phase, 60 Hz; • Integral position indicator enclosed, non-ventilated, high • Space heater standard starting torque, reversible induc- • Two 1/2" conduit connections tion, Class E insulation • Detachable manual override crank Thermal overload Auto reset, embedded • Terminal strip wiring Travel limit switches Cam operated, adjustable SPDT • Worm gear drive, no electro-mechanical brake for open/close stop required • Mounting orientation in any direction Position indicator High-visibility graduated dial • 4-20 mA or 500Ω optional feedback signal Conduit connections
    [Show full text]
  • FY2020-2029 Decade Plan
    Table of Contents Section 1 – Introduction Section 2 – Decade Plan Spreadsheets Spreadsheet 1: Summary of Projects Spreadsheet 2: Level 1 Priority Renewal Projects Spreadsheet 3: Water 2120 Projects Spreadsheet 4: Special Projects and Priority 1 Growth Projects Spreadsheet 5: Priority 2 Growth Projects Section 3 – Project Summary Sheets Basic Renewal Program Category 100: Sanitary Sewer Pipelines Category 200: Drinking Water Pipelines Category 300: Southside Reclamation Plant (SWRP) Category 400: Soil Amendment Facility (SAF) Category 500: Lift Stations and Vacuum Stations Category 600: Odor Control Facilities Category 700: Drinking Water Plant: Groundwater System Category 800: Drinking Water Plant: Treatment Systems Category 900: Reuse Line and Plant Category 1000: Compliance Category 1100: Shared Facilities Category 1200: Franchise Agreement Compliance Category 1300: Vehicles and Heavy Equipment Water 2120 Projects Category 8000: Water 2120 Projects Special Projects Category 9400: Special Projects Growth Projects Category 2000: Drinking Water Plant Growth Category 2100: Arsenic Treatment Growth Category 2200: Wastewater Facility Growth Category 2300: Water Lines Growth Category 2400: Land Acquisition Category 2500: Other Agreements Category 2600: Water Rights and Storage Category 2700: Development Agreements Category 2800: MIS/GIS Category 2900: Vehicles and Heavy Equipment Category 3000: Utility Risk Reduction Category 3100: Master Plans Category 3200: Miscellaneous Albuquerque Bernalillo County Water Utility Authority Decade Plan 2020 – 2029 INTRODUCTION Background The Decade Plan for the Water Authority is developed every two years and describes the proposed Capital Improvement Program (CIP) spending for the next ten years. The Decade Plan provides a direct link from the Water Authority’s financial plan to the proposed capital needs. The Decade Plan outlines projects in the Basic Program, Special Projects and the Growth funding categories.
    [Show full text]
  • The Baltic Sea Region the Baltic Sea Region
    TTHEHE BBALALTTICIC SSEAEA RREGIONEGION Cultures,Cultures, Politics,Politics, SocietiesSocieties EditorEditor WitoldWitold MaciejewskiMaciejewski A Baltic University Publication A chronology of the history 7 of the Baltic Sea region Kristian Gerner 800-1250 Vikings; Early state formation and Christianization 800s-1000s Nordic Vikings dominate the Baltic Region 919-1024 The Saxon German Empire 966 Poland becomes Christianized under Mieszko I 988 Kiev Rus adopts Christianity 990s-1000s Denmark Christianized 999 The oldest record on existence of Gdańsk Cities and towns During the Middle Ages cities were small but they grew in number between 1200-1400 with increased trade, often in close proximity to feudal lords and bishops. Lübeck had some 20,000 inhabitants in the 14th and 15th centuries. In many cities around the Baltic Sea, German merchants became very influential. In Swedish cities tensions between Germans and Swedes were common. 1000s Sweden Christianized 1000s-1100s Finland Christianized. Swedish domination established 1025 Boleslaw I crowned King of Poland 1103-1104 A Nordic archbishopric founded in Lund 1143 Lübeck founded (rebuilt 1159 after a fire) 1150s-1220s Denmark dominates the Baltic Region 1161 Visby becomes a “free port” and develops into an important trade center 1100s Copenhagen founded (town charter 1254) 1100s-1200s German movement to the East 1200s Livonia under domination of the Teutonic Order 1200s Estonia and Livonia Christianized 1201 Riga founded by German bishop Albert 1219 Reval/Tallinn founded by Danes ca 1250
    [Show full text]
  • The Canterbury Tales and Its Times Library Research Guide
    The Canterbury Tales and Its Times Library Research Guide McShain Library La Salle College High School SCOPE OR BAC8605KGR CheltenhamOUND Avenue Wyndmoor, PA 19038-7199 215-233-2911 SCOPE OR BACKGROUND This research guide lists a selected guide to resources available in our library on the topic of life in during the time of the Canterbury Tales. The Canterbury Tales is a collection of tales written in verse and set in the late 1300’s. The collection was begun around 1386. This era is called medieval times or the time of the middle ages. The Middle Ages is the period between ancient and modern times in Western Europe. It extends from the end of the Roman Empire (from about A.D. 400’s) to the 1500’s. INTRODUCTION TO THE TOPIC “Canterbury Tales” in Literature and Its Times, vol. 1, p. 64 – 70. R 809 LIT KEY DATES AND TIMES Black Death – 1300s A.D. (CE) Crusades – 1096 – 1270 A.D. (CE) Feudal Europe – 900s – 1000s A.D. (CE) High Middle Ages – between 1000s and the late 1200s A.D. (CE) Late Middle Ages – 1300s – 1500s A.D. (CE) Timelines on File: the Ancient and Medieval World (Prehistory – 1500 CE). R 902 TIM Scarre, Christopher. Smithsonian Timelines of the Ancient World. R 930 SMI KEYWORDS FOR SEARCHES Chaucer, Geoffrey Medieval Middle ages BROWSE FOR BOOKS USING THESE CALL NUMBERS Middle Ages, Europe – 940.1 Chaucer, Geoffrey – 821.1, 821.5 Religion – 200s 1 GRAPHICS, MAPS, DIAGRAMS, CHARTS, PHOTOGRAPHS, ETC. Curriculum Resource Center http://www.fofweb.com?Direct2.asp?ID=11900&ItemID=WE51 Historical Maps I.
    [Show full text]
  • The Grande Hub)
    THE L M F J GRANDE HUB THE GRANARY DISTRICT SALT LAKE CITY, UT 2.162 ACRES 212 LIHTC UNITS 21,250 ft.2 COMMERCIAL 157,200 ft.2 LIHTC RESIDENTIAL 16.18% COMMERCIAL IRR $50,305,104 $12,933,126 $17,987,921 TOTAL COST TOTAL EQUITY FROM TAX CREDIT SALE VALUE TO TAX CREDIT INVESTOR [credits + tax losses] SITE EVALUATION Once stagnant and in a state of urban decay, the Granary District is currently transforming into a flourishing area of Salt Lake City. Though its character was once defined by blue collar grit, the District is now mixed with creative ambitions and entrepreneurial energy. As its redevelopment potential is exposed, the District is rapidly changing from static surfaces of pavement and underutilized buildings to a dynamic space full of investment opportunities. PROJECT PROPOSAL Based on market research, LMFJ proposes developing affordable housing under the LIHTC model [4% credits] ; a moderate sized, local pharmacy/grocery; and small-scale restaurant. With the current rapid growth and planned restoration projects, maintaining and preserving housing affordability throughout the Granary District must be imperative along with the provision of essential needs. The Granary District, Personal Photographs The basis of our development plan builds upon the vision of the Granary District — a thriving social hub of blue collar workers, entrepreneurs, and creatives who can live comfortably and actively contribute to its revitalization. LEGAL PROFILE The site contains two separate parcels located along 900S and Rio Grande St. To feasibly develop the site, LMFJ proposes purchasing the entire block these parcels are within, and demolishing all existing structures.
    [Show full text]
  • Addendum 1, 12/30/2020 6
    CITY OF RIO RANCHO DEPARTMENT OF FINANCIAL SERVICES PURCHASING DIVISION 3200 CIVIC CENTER CIRCLE NE 3rd FLOOR RIO RANCHO, NEW MEXICO 87144 TELEPHONE: 505-896-8769 FAX: 505-891-5762 ADDENDUM NUMBER (1) ONE IFB-21-PW-017 VERANDA ROAD SAFETY IMPROVEMENTS December 30, 2020 Addendum Number (1) One forms part of the contract documents and modifies them in the manner set forth below. ATTENTION CONTRACTORS Questions and Answers Attachments: o Revised Bid Form o Revised Plans o NMDOT Specs: Section 906- Minimum Testing Requirements Questions and Answers: 1. Question: Should there be either a bid item for testing or an allowance for it on this project? Answer: A material testing allowance has been added to the bid tab. See revised bid form attached hereto. 2. Question: Notes on the plans indicate that the header curb associated with the handicap ramps is incidental to the handicap ramps but bid item # 20 calls for 230’ of header curb (which is about the quantity associated with the handicap ramps). Please clarify Answer: Header curb is incidental to the ramps; therefore, quantity has been removed from the plans and Bid Form. 3. Question: Do the valve boxes being adjusted in bid item # 1 require new lids? Answer: If new lids are needed for the adjustments of the valve boxes, they will be considered incidental to the adjustment. 4. Question: Can you provide a Bid Item for Quality Control Testing? Answer: A material testing allowance has been added to the bid tab. See revised bid form attached hereto. 5. Question: What is the existing Pavement thickness for the Removal of Surfacing Bid Item? Answer: The existing pavement thickness is approximately 4 to 6 inches.
    [Show full text]
  • 1000S - Early Warning System Errors
    1000s - Early Warning System Errors Error codes below relate to Early Warning System (EWS): Error number Error message Additional info and instruction 1001 Your test has been saved. Please notify Connectivity issues likely caused this error. your test administrator. Follow the on-screen instructions. 1002 Please notify your test administrator. The designated save location is not writable or due to the inability to save a Saved Response File after test content has been viewed. Follow the on-screen instructions. 1003 Unable to save response file (at beginning The designated location for saving a of test) response file (as a backup in case of network interruption) is not writable. TestNav cannot connect to the servers, or cannot save the Saved Response File after the test content has been viewed. Click Exit Test and contact your local technical support to determine why the save locations are not working and there is a loss of connectivity. Resume the student or contact your school assessment coordinator to resume the student. The student should log in and continue testing. 1004 Unable to save response file (during test) Each operating system platform handles the EWS response file a bit differently. When displayed, the messages will include instructions unique to the platform being used for dealing with the error. This message is displayed when all of the below are true: The student has visited one or more items. The Saved Response File cannot be saved to any of the designated locations. TestNav is unable to successfully send responses to Pearson. The test has not yet been exited or submitted.
    [Show full text]