DOCSLIB.ORG

Honda Pilot Specifications

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Honda Pilot Specifications Honda Pilot Specifications Engineering DESCRIPTION LX EX EX-L TOURING ELITE Engine Type: V6 • • • • • Engine Block / Cylinder Head: Aluminum-Alloy • • • • • Horsepower (SAE net): 280 @ 6000 rpm • • • • • Torque (SAE net): 262 lb-ft @ 4700 rpm • • • • • Displacement: 3471 cc • • • • • Redline: 6800 rpm • • • • • Bore and Stroke: 89 mm x 93 mm • • • • • Compression Ratio: 11.5 : 1 • • • • • Valve Train: 24-Valve SOHC i-VTEC® • • • • • Direct Fuel Injection • • • • • Drive-by-Wire Throttle System • • • • • Eco Assist™ System • • • • • Variable Cylinder Management™ (VCM®) • • • • • Active Control Engine Mount System (ACM) • • • • • Active Noise Cancellation™ (ANC) • • • • • Hill Start Assist • • • • • CARB Emissions Rating1 : ULEV-2 • • • • • Direct Ignition System with Immobilizer • • • • • 100K +/- Miles No Scheduled Tune-Ups2 • • • • • Intelligent Variable Torque Management™ (i-VTM4™) AWD System Available Available Available Available • Intelligent Traction Management • • • • Snow (2WD Models) • • • Snow / Sand / Mud (AWD Models) • • • • Remote Engine Start • • • • Idle-Stop • • 2WD = Two-Wheel Drive • AWD = All-Wheel Drive Transmissions DESCRIPTION LX EX EX-L TOURING ELITE 6-Speed Automatic Transmission • • • 9-Speed Automatic Transmission • • with Shift-By-Wire (SBW) • • with Paddle Shifters • • 6-Speed Automatic Transmission 9-Speed Automatic Transmission GEAR : RATIO GEAR : RATIO 1st : 3.359 1st : 4.713 2nd : 2.095 2nd : 2.842 3rd : 1.485 3rd : 1.909 4th : 1.065 4th : 1.382 5th : 0.754 5th : 1.000 6th : 0.556 6th : 0.808 Reverse : 2.269 7th : 0.699 Final Drive : 4.250 8th : 0.580 9th : 0.480 Reverse : 3.83 Final Drive : 4.334 Body / Suspension / Chassis DESCRIPTION LX EX EX-L TOURING ELITE Unit-Body Construction • • • • • MacPherson Strut Front Suspension • • • • • Multi-Link Rear Suspension • • • • • Electric Power-Assisted Rack-and-Pinion Steering (EPS) • • • • • Stabilizer Bar • • • • • Front: 25 mm (solid) • • • • • Rear: 26.5 mm (tubular) • • • • • Steering Wheel Turns, Lock-to-Lock: 3.14 • • • • • Steering Ratio: 16.0 : 1 • • • • • Turning Diameter, Curb-to-Curb: 39.4 ft • • • • • Power-Assisted Brakes • • • • • Ventilated Front Disc: 12.6 in • • • • • Solid Rear Disc: 13.0 in • • • • • Compact Spare Tire: T165/80 D17 104M • • • • • Wheels: 18-Inch Alloy • • • Wheels: 20-Inch Alloy Available Available Available • • All-Season Tires: 245/60 R18 105H • • • All-Season Tires: 245/50 R20 102H • • Exterior Measurements DESCRIPTION LX EX EX-L TOURING ELITE Wheelbase: 111.0 in • • • • • Length: 194.5 in • • • • • Height: 69.8 in • • • • • Width: 78.6 in • • • • • Track: Front / Rear: 66.3 in / 66.3 in • • • • • Ground Clearance (Unladen): 7.3 in • • • • • Approach / Departure Angles: 18° / 19.7° • • • • • Curb Weight for 2WD: 4054 lbs 4074 lbs 4118 lbs 4140 lbs - with Honda Sensing - 4079 lbs 4123 lbs - - with Navigation - - 4120 lbs - - with RES - - 4136 lbs - - Curb Weight for AWD: 4220 lbs 4239 lbs 4284 lbs 4303 lbs 4317 lbs with Honda Sensing - 4246 lbs 4288 lbs - - with Navigation - - 4288 lbs - - with RES - - 4301 lbs - - Weight Distribution for 2WD (Front/Rear, %) 58.1 / 41.9 58.1 / 41.9 58.1 / 41.9 57.2 / 42.8 - with RES - - 57.7% / 42.3% - - Weight Distribution for AWD (Front/Rear, %) 57.1 / 42.9 57.1 / 42.9 57.1 / 42.9 56.1 / 43.9 56.7 / 43.3 with RES - - 56.7 / 43.3 - - Towing Capacity for 2WD: 3,500 lbs3 • • • • - Towing Capacity for AWD: 5,000 lbs3 • • • • • 2WD = Two-Wheel Drive • AWD = All-Wheel Drive Interior Measurements DESCRIPTION LX EX EX-L TOURING ELITE Headroom — Front (in) 40.1 40.1 39.5 39.5 39.5 Headroom — Middle (in) 40.2 40.2 39.9 39.9 40.9 Headroom — Rear (in): 38.9 in • • • • • Legroom — Front: 40.9 in • • • • • Legroom — Middle: 38.4 in • • • • • Legroom — Rear: 31.9 in • • • • • Shoulder Room — Front: 62.0 in • • • • • Shoulder Room — Middle: 62.0 in • • • • • Shoulder Room — Rear: 57.6 in • • • • • Hip Room — Front: 59.1 in • • • • • Hip Room — Middle: 57.3 in • • • • • Hip Room — Rear: 44.6 in • • • • • Cargo Volume — Behind 3rd-Row (cu ft) 16.54 / 18.55 16.54 / 18.55 16.54 / 18.55 16.54 / 18.55 16.04 / 18.05 Cargo Volume — Behind 2nd-Row (cu ft) 46.84 / 55.95 46.84 / 55.95 46.84 / 55.95 46.84 / 55.95 46.04 / 55.05 Cargo Volume — Behind 1st-Row (cu ft) 83.94 / 109.05 83.84 / 109.2 83.84 / 109.25 83.84 / 109.25 82.14 / 108.55 Passenger Volume (cu ft) 152.9 152.9 151.7 151.7 153.1 Seating Capacity 8 8 8 8 7 EPA Mileage Ratings6 / Fuel DESCRIPTION LX EX EX-L TOURING ELITE 6-Speed Automatic Transmission (6AT) — 2WD City: 19 MPG • • • Highway: 27 MPG • • • Combined: 22 MPG • • • 6-Speed Automatic Transmission (6AT) — AWD City: 18 MPG • • • Highway: 26 MPG • • • Combined: 21 MPG • • • 9-Speed Automatic Transmission (9AT) — 2WD City: 20 MPG • Highway: 27 MPG • Combined: 23 MPG • 9-Speed Automatic Transmission (9AT) — AWD City: 19 MPG • • Highway: 26 MPG • • Combined: 22 MPG • • Fuel Tank Capacity: 19.5 gal • • • • • Required Fuel: Regular Unleaded • • • • • 2WD = Two-Wheel Drive • AWD = All-Wheel Drive Active Safety DESCRIPTION LX EX EX-L TOURING ELITE Vehicle Stability Assist™ (VSA®) with Traction Control7 • • • • • Anti-Lock Braking System (ABS) • • • • • Electronic Brake Distribution (EBD) • • • • • Brake Assist • • • • • Tire Pressure Monitoring System (TPMS)8 • • • • • Tire Fill Assist • • • • • Location and Pressure Indicators • • • • • Daytime Running Lights (DRL) • LED LED LED LED Multi-Angle Rearview Camera9 with Guidelines • • • • • with Dynamic Guidelines • • • • Collision Mitigation Braking System™ (CMBS™)10 (HS) Available Available • • Road Departure Mitigation System (RDM)11 (HS) Available Available • • Forward Collision Warning (FCW)12 (HS) Available Available • • Lane Departure Warning (LDW)13 (HS) Available Available • • HS = Honda Sensing™ Feature Passive Safety DESCRIPTION LX EX EX-L TOURING ELITE Advanced Compatibility Engineering™ (ACE™) Body Structure • • • • • Dual-Stage, Multiple-Threshold Front Airbags (SRS) • • • • • SmartVent® Front Side Airbags • • • • • 3-Row Side Curtain Airbags with Rollover Sensor • • • • • 3-Point Seat Belts at All Seating Positions • • • • • Front 3-Point Seat Belts with Automatic Tensioning System • • • • • Lower Anchors and Tethers for Children (LATCH) • • • • • Lower Anchors (2nd-Row All) • • • • • Lower Anchors (3rd-Row Passenger-Side) • • • • • Tether Anchors (2nd-Row All) • • • • • Tether Anchors (3rd-Row All) • • • • • Driver’s and Front Passenger’s Seat-Belt Reminder • • • • • Child-Proof Rear Door Locks • • • • • Driver-Assist Technology DESCRIPTION LX EX EX-L TOURING ELITE Honda LaneWatchTM14 • • • Lane Keeping Assist System (LKAS)15 (HS) Available Available • • Adaptive Cruise Control (ACC)16 (HS) Available Available • • Auto High-Beam Headlights • Blind Spot Information System (BSI) with Cross Traffic Monitor17 • HS = Honda Sensing™ Feature Exterior Features DESCRIPTION LX EX EX-L TOURING ELITE One-Touch Turn Indicators • • • • • Integrated Glass Antenna • • • • • Rear Privacy Glass • • • • • LED Brake Lights • • • • • Intermittent Rear Window Wiper / Washer • • • • • Security System • • • • • Variable Intermittent Windshield Wipers • • • • Rain Sensing Remote Entry • Programmable Programmable Programmable Programmable Multi-Reflector Halogen Headlights with Auto-Off with Auto-On / Off with Auto-On / Off with Auto-On / Off with Auto-On / Off Door Handles Black Body-Colored Body-Colored Chrome Chrome Smart Entry • • • • Fog Lights • • • • One-Touch Power Moonroof with Tilt Feature • • • Power Tailgate • • • Roof Rails • • Body-Colored Parking Sensors (Front / Rear) • • Panoramic Roof • LED Headlights with Auto-On / Off • Acoustic Glass • • • Windshield • • • Front Doors • • Power Side Mirrors including Expanded View Driver’s Mirror Black Body-Colored Body-Colored Body-Colored Body-Colored Heated Side Mirrors AWD models AWD models AWD models • Memory and Integrated LED Turn Indicators • • AWD = All-Wheel Drive Comfort and Convenience DESCRIPTION LX EX EX-L TOURING ELITE Air Conditioning with Air-Filtration System • Sunglasses Holder • Push Button Start • • • • • Power Windows with Auto-Up/Down Driver’s and Front • • • • • Passenger’s Window Power Door and Tailgate Locks • • • • • Cruise Control • • • • • Tilt and Telescopic Steering Column • • • • • Multi-Functional Center Console Storage • • • • • Lockable Glove Compartment • • • • • Sliding Sun Visors • • • • • Remote Fuel Filler Door Release • • • • • Rear Window Defroster with Timer • • • • • Rear-Seat Heater Ducts • • • • • Cargo Area Light • • • • • Hidden Storage Well • • • • • Cargo Area Tie-Down Anchors (4 Total) • • • • • Cargo Area Bag Hooks • • • • • Capless Fuel Filler • • • • • Map Lights (All Rows) • • • • LED (Front Row) Tri-Zone Automatic Climate Control System with Humidity Control and Air Filtration • • • • HomeLink® Remote System18 • • • • Driver’s and Front Passenger’s Illuminated Vanity Mirrors • • • • Conversation Mirror with Sunglasses Holder • • • • Rear Entertainment System (RES) Available19 Blu-ray Blu-ray 115-Volt Power Outlet with RES • • Integrated Sunshades (2nd-Row) with RES • • Automatic-Dimming Rearview Mirror • • • Leather-Wrapped Steering Wheel • • Heated Courtesy Door Lights (Front-Row) • • Blue Ambient LED Lighting • • Beverage Holders • • • • • Front Row (5) • • • Illuminated Illuminated 2nd-Row (6) • • • Illuminated 3rd-Row (4) • • • • • Seatback Pockets • • • • • Front Passenger’s Seatback Pocket • • • • • Driver’s Seatback Pocket • • • • Illuminated Steering Wheel-Mounted Controls • • • • Cruise / Audio / Phone • • • • • Display Audio • •
Load more

Recommended publications
  • Supercross Amateur Racing
    Supercross Amateur Racing AMATEUR CLASS DESIGNATIONS Class Name Age Displacement Specifications 51cc Limited 4 - 8 0cc-51cc 2-stroke or 4-stroke 51cc Limited 4 - 6 and 51cc Limited 4 – 8 age range minicycles are both approved in this class 51cc Limited 4 - 6 0cc-51cc 2-stroke or 4-stroke Single-speed automatic. Maximum (adjusted length) wheelbase 36 inches. Maximum wheel size 10 inches. Maximum seat height 24 inches. No larger than 14 mm round intake. 51cc Limited 7 - 8 0cc-51cc 2-stroke or 4-stroke Single-speed automatic. Maximum (adjusted length) wheelbase 41 inches. Maximum wheel size 12 inches. Retrofitted 12-inch wheels are permitted on all class 2 minicycles. OEMs part must be used. No larger than 19mm round intake. Ultracross 50’s 4-8 0-51cc 2-stroke or 51cc Limited 4 - 6 and 51cc Limited 4 – 8 age range 4-stroke minicycles are both approved in this class 65cc 7 - 11 59cc-65cc 2-stroke Minimum wheel size 12 inches. Maximum front wheel 14 inches. Maximum (adjusted length) wheelbase 45 inches. Maximum wheelbase must maintain manufacturer specifications. 65cc 7 - 9 59cc-65cc 2-stroke Minimum wheel size 12 inches. Maximum front wheel 14 inches. Maximum (adjusted length) wheelbase 45 inches. Maximum wheelbase must maintain manufacturer specifications. 65cc 10 - 11 59cc-65cc 2-stroke Minimum wheel size 12 inches. Maximum front wheel 14 inches. Maximum (adjusted length) wheelbase 45 inches. Maximum wheelbase must maintain manufacturer specifications. 85cc 9 - 12 79cc-85cc 2-stroke Maximum front wheel 17” Minimum rear wheel 12” Maximum rear wheel 16” Maximum wheel base 51” Mini Senior 12 - 15 79cc-85cc 2-stroke or 75-150cc 4-stroke Maximum front wheel17” Minimum rear wheel 12” Maximum rear wheel 16” Maximum wheel base 51” Supermini 1 9 - 15 79cc-112cc 2-stroke or 75cc-150cc 4-stroke Maximum front wheel 19” Maximum rear wheel 16” Maximum wheel base 52” *Competitors 9 thru 11 yrs of age are only allowed to use a 79cc - 85cc 2-stroke minicycle if competing in this class.
    [Show full text]
  • Types of Divisible Load Overweight Permits – Perm 69 (07/09)
    State of New York Department of Transportation Central Permit Office Types of Divisible Load Overweight Permits – Perm 69 (07/09) Statewide Permit Types Type 1 (F1) Max. Axle and Grouping Weights in Lbs. Fee $360.00 Steering axle 22,400 Min. Axles 3 Any other Single axle 25,000 Max. Axles 4 Tandem Group 47,000 Min. Wheelbase 16 Feet Tridem Group 57,000 Max. Gross Vehicle Weight 97,400 Lbs. Max. Trailer Length 48 Feet Permitted Gross weight is based on the F1 formula : (1,250 x Wheelbase* ) + 42,500 * Overall Wheelbase in inches is rounded to the nearest whole foot. Type 1A (F1) - This permit type is Large Through Truck Restricted. Max. Axle and Grouping Weights in Lbs. Fee $750.00 (5 or 6 axles) Steering axle 22,400 $900.00 (7 or more axles) Any other Single axle 25,000 Min. Axles 5 Tandem Group 47,000 Min. Wheelbase 16 Feet Tridem Group 57,000 Max. Gross Vehicle Weight 102,000 Lbs. Quad 62,000 Max. Trailer Length 48 Feet Permitted Gross weight is based on the F1 formula : (1,250 x Wheelbase* ) + 42,500 * Overall Wheelbase in inches is rounded to the nearest whole foot. Type 7 (F2) - This permit type is Large Through Truck Restricted. Max. Axle and Grouping Weights in Lbs. Fee $750.00 (6 axles) Steering axle 22,400 $900.00 (7 or more axles) Any other Single axle 25,000 Min. Axles 6 Tandem Group 48,000 Min. Wheelbase 36 ½ feet Tridem Group 58,000 Max. Gross Vehicle Weight 107,000 Lbs.
    [Show full text]
  • Bendix ABS-6 Advanced with ESP Stability System
    Bendix® ABS-6 Advanced with ESP® Stability System Frequently Asked Questions to Help You Make an Intelligent Investment in Stability Contents: Key FAQs (Start here!)………….. Pg. 2 Stability Definitions …………….. Pg. 6 System Comparison ……………. Pg. 7 Function/Performance ………….. Pg. 9 Value ………………………………. Pg. 12 Availability/Applications ……….. Pg. 14 Vehicle System Integration …….. Pg. 16 Safety ………………………………. Pg. 17 Take the Next Step ………………. Pg. 18 Please note: This document is designed to assist you in the stability system decision process, not to serve as a performance guarantee. No system will prevent 100% of the incidents you may experience. This information is subject to change without notice © 2007 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group. All Rights Reserved. 03/07 1 Key FAQs What is roll stability? Roll stability counteracts the tendency of a vehicle, or vehicle combination, to tip over while changing direction (typically while turning). The lateral (side) acceleration creates a force at the center of gravity (CG), “pushing” the truck/tractor-trailer horizontally. The friction between the tires and the road opposes that force. If the lateral force is high enough, one side of the vehicle may begin to lift off the ground potentially causing the vehicle to roll over. Factors influencing the sensitivity of a vehicle to lateral forces include: the load CG height, load offset, road adhesion, suspension stiffness, frame stiffness and track width of vehicle. What is yaw stability? Yaw stability counteracts the tendency of a vehicle to spin about its vertical axis. During operation, if the friction between the road surface and the tractor’s tires is not sufficient to oppose lateral (side) forces, one or more of the tires can slide, causing the truck/tractor to spin.
    [Show full text]
  • 2021 Ram 1500 Classic
    SEDANS MINIVANS/CROSSOVERS SPORT UTILITY TRUCKS/COMMERCIAL LAW ENFORCEMENT 2021 RAM 1500 CLASSIC SELECT STANDARD FEATURES 3.6L Pentastar® V6 / 850RE 8-speed Automatic Air Conditioning — Manual Alternator — 160-amp Axle — 3.21 ratio Battery — 730-amp Cluster — Instrument, with 3.5-inch display screen for Driver Information Display Fuel Tank — 26-gallon Headlamps — Automatic quad-lens halogen with incandescent taillamps Mirrors — 6 x 9-inch Seats — 40/20/40 split-bench front seat with folding front armrest/cup holder, floor-mounted storage tray on Crew Cab (Quad Cab® and Crew Cab models include folding rear bench seat) Shock Absorbers — Heavy-duty, front and rear Spare Tire — Full-size Stabilizer Bar — Front and rear Steering — Electronic, rack and pinion Storage — Front, behind the seats (Regular Cab only) Properly secure all cargo. — Rear, in-floor bins, two with removable liners (Crew Cab only) — Rear, underseat compartment (Quad Cab and Crew Cab models only) Styled Steel Wheels — 17 x 7-inch Suspension — Front, upper and lower A-arms, coil springs, twin-tube shocks — Rear, five-link, coil springs, twin-tube shocks Tires — P265 / 70R17 BSW A/S Transfer Case — Electronic part-time (4x4 models only) Windows — Manual (Regular Cab only) — Power, front and rear with driver’s one-touch up/down (Quad Cab and Crew Cab models only) SAFETY & SECURITY Air Bags(2) — Advanced multistage front — Supplemental side-curtain — Supplemental front-seat side-mounted Brakes — Power-assisted four-wheel antilock disc Electronic Stability Control(3) — Includes Four-wheel Antilock Brake System, Brake Assist, All-Speed Traction Control, Rain Brake Support, Ready Alert Braking, Electronic Roll Mitigation, Hill Start Assist and Trailer Sway Damping(3) ParkView® Rear Back-Up Camera(22) ENGINES HORSEPOWER(17) TORQUE(17) Properly secure all cargo.
    [Show full text]
  • Road Map for the Future Making the Case for Full-Stability
    ROAD MAP FOR THE FUTURE MAKING THE CASE FOR FULL-STABILITY Bendix Commercial Vehicle Systems LLC 901 Cleveland Street • Elyria, Ohio 44035 1-800-247-2725 • www.bendix.com/abs6 road map for the future : making the case for full-stability TABLE OF CONTENTS 1 : Important Terms ............................................... 3-4 2 : Executive Summary ............................................. 5-7 3 : Understanding Stability Systems .................................. 8-12 4 : The Difference Between Roll-Only and Full-Stability Systems ...........13-23 5 : Stability for Straight Trucks/Vocational Vehicles ......................24-26 6 : Why Data Supports Full-Stability Systems ..........................27-30 7 : The Safety ROI of Stability Systems ................................31-33 8 : Recognizing the Limitations of Stability Systems ......................34-37 9 : Stability System Maintenance .....................................38-40 10 : Stability as the Foundation for Future Technologies ...................41-42 11 : Conclusion .................................................. 43-44 12 : Appendix A: Analysis of the “Large Truck Crash Causation Study” ..... 45-46 13 : About the Authors ................................................47 road map for the future : making the case for full-stability 1 : 1 2 IMPORtant teRMS Directional Instability Before delving into information about the The loss of the vehicle’s ability to follow the driver’s steering, technological differences acceleration or braking input. between commercial vehicle
    [Show full text]
  • N-SERIES DIMENSIONS GVWR/GCWR 12,000/18,000 Lbs
    GAS N-Series NPR NPR NPR-HD NPR-HD Specifications Gas Gas Crew Cab Gas Gas Crew Cab N-SERIES DIMENSIONS GVWR/GCWR 12,000/18,000 lbs. 12,000/18,000 lbs. 14,500/20,500 lbs. 14,500/20,500 lbs. BODY/PAYLOAD ALLOWANCE 6,782-6,978 lbs. 6,246-6,308 lbs. 8,977-9,174 lbs. 8,442-8,503 lbs. Diesel and Gas Measurements GAWR Front 4,860 lbs. 4,860 lbs. 6,630 lbs. 6,630 lbs. Cab to End of Frame Rear 8,840 lbs. 8,840 lbs. 11,020 lbs. 11,020 lbs. FRONT AXLE CAPACITY 6,830 lbs. 6,830 lbs. 6,830 lbs. 6,830 lbs. Cab to Axle REAR AXLE CAPACITY 11,020 lbs. 11,020 lbs. 11,020 lbs. 11,020 lbs. Back of Cab (in.) Ratio 4.100 4.100 4.300 4.300 SUSPENSION F/R SPRINGS Tapered/Multi-Leaf Tapered/Multi-Leaf Tapered/Multi-Leaf Tapered/Multi-Leaf Overall Width Capacity 8,440/12,900 lbs. 8,440/12,900 lbs. 8,440/12,900 lbs. 8,440/12,900 lbs. FRAME Section Modulus 7.20 in.3 7.20 in.3 7.20 in.3 7.20 in.3 Resistance Bending Moment 316,800 lb.-in. 316,800 lb.-in. 316,800 lb.-in. 316,800 lb.-in. Diesel Cab Chassis Shown SERVICE BRAKES Vacuum/Hydraulic with Vacuum/Hydraulic with Vacuum/Hydraulic with Vacuum/Hydraulic with Front/Rear 4-Channel ABS Disc/Drum 4-Channel ABS Disc/Drum 4-Channel ABS Disc/Drum 4-Channel ABS Disc/Drum Wheelbase Overall Length TRANSMISSION 6L90 6-speed auto.
    [Show full text]
  • Rollover of Heavy Commercial Vehicles
    Rollover of Heavy Commercial Vehicles - UMTRI-99- 19 August, 1999 C. B. Winkler R. D. Ervin The University of Michigan Transportation Research Institute 2901 Baxter Road, Ann Arbor, Michigan 48 109 for Volvo Truck Corporation, AB Goteborg, Sweden and the Great Lakes Center for Truck and Transit Research Ann Arbor, Michigan Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Reciplent's Catalog No. 4. Title and Subtitle 5. Report Date August, 1999 Rollover of Heavy Commercial Vehicles 6. Performing Organization Code 8. Performing Organlzatlon Report Nio. 7. Author@) Winkler, C. B.; Ervin, R.D. - 9. Performing Organlzation Name and Address 1 10. work unit NO. (TRAIS) The University of Michigan Transportation Research Institute 11. Contract or Grant NO. 2901 Baxter Road, Ann Arbor, MI 48109-2150 13. Type of Report and Perlod Coverejd - 12. Sponsoring Agency Name and Address Final Report Volvo Truck Corporation, 1B Great lakes Center for Truck and Transit Research 14. Sponsoring Agency Code I 15. Supplementary Notes 16. Abstract The state-of-the-art understanding of rollover of the commercial vehicle is reviewed. Accident statistics are presented which highlight the severity and lethal nature of rollover crashes. Physical and statistical evidlence for the linkage between vehicle roll stability and the actual occurrence of rollover accidents is presented. The fundamentals of static roll stability are described in detail and then enhanced with discussion of dynamilc considerations of the rollover process. The text concludes with a discussion of the evolving use of intelligent electronic systems and active vehicle control for reducing the occurrence of rollover.
    [Show full text]
  • Design Vehicles and Turning Radii
    Design Vehicles and Turning Radii Brazhuman corp TTE 4824 Dr. Scott Washburn Introduction Design vehicles are selected motor vehicles with the weight, dimensions, and operating characteristics used to establish highway design controls for accommodating vehicles of designated classes. For purposes of geometric design, each design vehicle has larger physical dimensions and a larger minimum turning radius than most vehicles in its class. Introduction The design of an intersection is significantly affected by the type of design vehicle, including horizontal and vertical alignments, lane widths, turning radii, intersection sight distance, storage length of auxiliary lanes, and acceleration and deceleration lengths on auxiliary lanes. Design Vehicle Classes Four general classes of vehicles have been established, namely, passenger cars, buses, trucks, and recreational vehicles. The passenger car class includes compacts, subcompacts, sedans, pick-up trucks, SUVs, minivans, and full-size vans. Design Vehicle Classes Buses include inter-city (motor coaches), city transit, school, and articulated buses. The truck class includes single-unit trucks, truck tractor-semitrailer combinations, and truck tractors with semitrailers in combination with full trailers. Design Vehicle Classes Recreational vehicles include motor homes, cars with camper trailers, cars with boat trailers, motor homes with boat trailers, and motor homes pulling cars. Additionally, the bicycle should also be considered a design vehicle when its use on a roadway is permitted. Dimensions of Design Vehicles The 2001 AASHTO Green Book includes 19 design vehicles. The dimensions of design vehicles take into account dimensional trends in motor vehicle manufacture and represent a composite of the vehicles currently in operation; however, the design vehicle dimensions must represent the values critical to geometric design and are thus greater than nearly all vehicles belonging to the corresponding vehicle classes.
    [Show full text]
  • Optimum Suspension Geometry for a Formula SAE Car
    Portland State University PDXScholar University Honors Theses University Honors College 3-2-2018 Optimum Suspension Geometry for a Formula SAE Car Nathan Roner Portland State University Follow this and additional works at: https://pdxscholar.library.pdx.edu/honorstheses Let us know how access to this document benefits ou.y Recommended Citation Roner, Nathan, "Optimum Suspension Geometry for a Formula SAE Car" (2018). University Honors Theses. Paper 537. https://doi.org/10.15760/honors.542 This Thesis is brought to you for free and open access. It has been accepted for inclusion in University Honors Theses by an authorized administrator of PDXScholar. Please contact us if we can make this document more accessible: [email protected]. OPTIMUM SUSPENSION GEOMETRY FOR A FORMULA SAE CAR Nathan Roner An undergraduate honors thesis submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in University Honors and Mechanical Engineering Thesis Adviser Eric Lee Portland State University 2018 CONTENTS 1 Abstract 2 2 Introduction 2 3 Background 2 3.1 Iterative Design . 2 3.2 Formula SAE . 2 3.3 Software . 3 3.4 Definitions of Variables . 3 4 Methods 4 4.1 Known Requirements . 4 4.2 Tires . 4 4.3 Team Data . 4 4.4 Optimum Kinematics . 5 4.5 Solidworks . 5 4.6 Validation . 5 4.7 Revisions . 5 5 Design 6 5.1 Beginning . 6 5.2 First Iteration . 6 5.3 Second Iteration . 6 5.4 Third Iteration . 6 5.5 Subsequent Iterations . 7 1 1 Abstract another factor such as budget has been reached [6].
    [Show full text]
  • Truck Handling Stability Simulation and Comparison of Taper-Leaf and Multi-Leaf Spring Suspensions with the Same Vertical Stiffness
    applied sciences Article Truck Handling Stability Simulation and Comparison of Taper-Leaf and Multi-Leaf Spring Suspensions with the Same Vertical Stiffness Leilei Zhao 1, Yunshan Zhang 2, Yuewei Yu 1,*, Changcheng Zhou 1,*, Xiaohan Li 1 and Hongyan Li 3 1 School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255000, China; [email protected] (L.Z.); [email protected] (X.L.) 2 Shandong Automobile Spring Factory Zibo Co.,Ltd., Zibo 255000, China; [email protected] 3 State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China; [email protected] * Correspondence: [email protected] (Y.Y.); [email protected] (C.Z.); Tel.: +86-135-7338-7800 (C.Z.) Received: 16 December 2019; Accepted: 31 January 2020; Published: 14 February 2020 Abstract: The lightweight design of trucks is of great importance to enhance the load capacity and reduce the production cost. As a result, the taper-leaf spring will gradually replace the multi-leaf spring to become the main elastic element of the suspension for trucks. To reveal the changes of the handling stability after the replacement, the simulations and comparison of the taper-leaf and the multi-leaf spring suspensions with the same vertical stiffness for trucks were conducted. Firstly, to ensure the same comfort of the truck before and after the replacement, an analytical method of replacing the multi-leaf spring with the taper-leaf spring was proposed. Secondly, the effectiveness of the method was verified by the stiffness tests based on a case study. Thirdly, the dynamic models of the taper-leaf spring and the multi-leaf spring with the same vertical stiffness are established and validated, respectively.
    [Show full text]
  • FHWA Highway Statistics VM-1 Data Procedure FHWA-PL-11-031
    FHWA Highway Statistics VM-1 Data Procedure FHWA-PL-11-031 Travel Monitoring and Surveys Division Office of Highway Policy Information Federal Highway Administration 1200 New Jersey Avenue, SE Washington, DC 20590 Originally Developed - August 2011 Updated - March 2019 This document is intended to provide the procedures and steps used in the development of the FHWA Highway Statistics VM-1 publication. The document has 4 components as defined below. Component 1: Approaches to Compute National VMT by Roadway Functional Class Group and Vehicle Types Component 2: Reconciling National Vehicle Registration Data Based on Axle Spacing and Tire Arrangements Component 3: Vehicle Occupancy Factor Computation Component 4: Fuel Efficiency Modeling Component 1 Approaches to Compute National VMT by Roadway Functional Class Groups and Vehicle Types Background Prior to the 2009 Highway Statistics, vehicle miles traveled (VMT) related data elements in table VM-1 were based on a modeling procedure with initial inputs from the Highway Performance and Monitoring System (HPMS) data and constrictions established from the Vehicle Inventory and Use Survey (VIUS) data. It has been noticed that VMT by vehicle type and roadway functional class data under this historical procedure were drifting away from what is being reported through the HPMS system. When the original historical modeling method was developed (early 1990s), the modeling logic was necessary due to potential field traffic data quality issues and the availability of the Vehicle Inventory and Use Survey (VIUS) data. However, with the advancement in traffic data collection instruments, implementation of institutionalized processes and procedures by State highway agencies in data collection, practical experience gained in traffic data collection, and the discontinuation of the VIUS (the last one was carried out in 2002), the original modeling method is deemed no longer appropriate.
    [Show full text]
  • Selecting a Rear Suspension Frame Design Has a Tremendous Amount to Do Came with Coil Springs
    Product Tech Chris Alston Explains Drag Racing Suspensions Our popular Battle Cruiser line offers two affordable, fully adjust- Selecting a able styles of rear suspension. The “double-adjustable” ladder bar is ideal for e.t. brackets and street-strip applications. The 4-link is Rear now available with a choice of front-mount designs that fit aftermarket rear frames (as shown) Suspension or a boxed crossmember. LADDER BARS Unlike “slapper bars” and other bolt-on devices, welded ladder bars give you a strong suspen- sion with some basic adjustability. Any ladder bar that uses an adjustable front mount can be adjusted for three things. First is what we’ll call the suspension’s “intersect point” in the chas- sis. When you raise or lower a ladder bar in its front mount, you’re actually adjusting the inter- Chassisworks’ exclusive front sect point of how the drive loads are applied crossmember features a tighter in the chassis. Secondly, you can adjust pinion bend, more adjustment holes and angle by rotating the two rod ends at the rear of the ladder bar. Finally, you can adjust the stronger, 360-degree brackets. preload in the car by setting one side differently from the other, effectively shifting weight from one rear tire to another. Adjusting pinion angle LADDER-BAR LENGTH 4-LINKS or preload in a standard-type Anyone who tells you that short-wheelbase cars A 4-link is definitely superior to ladder bars. ladder bar requires removing the bar, then need 30-inch ladder bars, intermediate However, a 4-link is only superior in application screwing or unscrewing the ends.
    [Show full text]