I OYS AIAK IE MAK I

GAE & OE r 2 nt pt 22 OOKS SECIAY ECOMMEE

h Stn Mhn Crbn. ll lltrtd th phtrph plt ... • • • • .. • • ( t. I COES.— Gnrl rptn—Mhn—Strppn— Abln— Addtnl Strppn nd Abln—Mzn—Mzn llr — Mzn BOYS lln nd Eptn—dn nd Unldn th Crbn—An nd rn — rn tn—Idt Atn—Clnn—Clnn bfr rn. h rnn v Mhn Gn Mhn Md E. (.00 Clbr Mdl, , Wtr Cld. ll lltrtd ANTI- th hlftn plt ... ( t, 8 I 6 COES.—Gnrl rptn—t—ld Strppn—tld ld Strppn f Grp—d Sp Adjtnt—Mhn—rpd Mntn rn—Stpp—Ufl t. MAK I h Mhn f th rnn Att fl, n pt fr. Illtrtd th plt nd dr ( t, I I 0 .00 r Mhn Gn Mhn Md E. ll lltrtd th hlftn plt ( t, 8 6 COES.—Gnrl rptn—Mhn—Strppn—Srvn th Gn — pr nd Adjtnt—Sht rpd Mntn—rn th Gn—Knd f r—rn—Ufl t—Stpp. h hpn Sbhn Gn Mhn Md E. ll lltrtd th hlftn plt ( t, 8 I 6 COES.—t—Gnrl rptn—Mhn—Ctt Cpntr —Strppn— bl Gn—Sht—Mzn—dn nd Unldn Mzn—rn: fr, rn nd Aftr— d Gnrn tn— rr l—Antn—t Stpp—ndr t. h Cplt Gnnr. A prtl n f ntr tn, n pl ln nd f thnlt ptbl th ffn. Wth prbl nt nd fll lltrtd th plt nd dr ... ( t, 2 2 0 h Arrr ndb. t. I, fl. br. ( t, 22 2 0 h b dl th th flln rfl: . I (S.M..E. Mr III nd , . 2 Mntr, . (. 4 .0 nh nd (. .00 nh, . 4 Mr , fl Mr III, rnn Att fl .00 nh. Eh pn h plt tn dln th xntn n vr ptn: Strppn (h fl, lt, Mzn, lht Gn (rn n, Crtrd, d Sp, rr rr, Wht f Sprn, Extrtr, rrl, d tn nd rrl rn. In ddtn, plt hn th plt pn nd drt xpldd v prvdd fr h rfl. h Arrr ndb. rt II. Mhn Crbn nd tl. br ( t, 22 2 0 COES.—h Stn Mhn Crbn, Mr , II, —h hpn Mhn Crbn—h nhtr Mhn Crbn—. tl (Wbl Mr I—. 2 tl (.8. Eh pn h plt tn dln th xntn n vr ptn. A plt hn th plt pn nd drt v prvdd. h Arrr ndb. rt III. ht Mhn Gn. br ( t, 22 2 0 COES.—Cprn f rn Gn nd r rthr Gn—h rn AESO ht Mhn Gn .0 nh, Mr nd —h r rthr ht Mhn Gn, Mr II— Gn p— ht Mhn Gn .0 nh, Mr ( GAE A OE IMIE Arn Gn .0—h th Mhn Gn. Eh pn h plt tn dln th xntn n vr Price Two Shillings (net) ptn. A plt hn th plt pn nd drt v (By post 2s. 2d.) prvdd.

GAE & OE IMIE, AESO COES AGE OYS AIAK IE (MAK ...... AA ...... GEEA ESCIIO ...... EMOIG A EACIG E O ...... ACIG O A EMOIG E MAGAIE . . . . SIIG A ASSEMIG E O ...... 2 MECAISM 2 O SUO ...... MAGAIE ...... 4 MAGAIE IIG A EMYIG ...... OAIG A UOAIG ...... OIG, SIG SEIG, AIMIG A IIG . . . . IIG OSIIOS A SIIG ...... 2 CEAIG ...... 2 AACME O OYS AIAK IE . . . 2 GEEA ...... 2 ESCIIO ...... 2 ASSEMY ...... 2 IE I GEA IAI Y AUSME ...... 2 GAE & OE IMIE EOIG 28 AESO E SAA MIIAUE 0 SCAE AGE . . . 28 44 E IMOISE AGE ...... 0 IUSAIOS AGE E OYS AI AK IE ...... 4

E OYS AI AK IE WI EEC COE I OSIIO . 6 ACIG E MAGAIE I OSIIO ...... 0 IIG E MAGAIE ...... 6 EMYIG E MAGAIE ...... E COEC O ...... 8 A COEC AIM O : A SAIOAY AK A AK COSSIG OM E O IG O OM IG O E A AK AOACIG OIQUEY SIIG OSIIO 20 KEEIG OSIIO ...... 20 SAIG OSIIO ...... 2 E CEAIG OUI ...... 22 AACME O OYS AIAK IE ...... 26 E SAA MIIAUE 0 SCAE AGE ...... 2 E IMOISE AGE ...... COOUE CA SOWIG MECAISMS, EC. n t n Cvr 4 2

MAGAIE Ovrhd bx tp, pt . . . . rnd. Ovrhd bx tp, ht (pt . . . lb. Ovrhd bx tp, ht (flld . . . 2½ lb. AMMUIIO .nh. In hp lr t th rl .00 ntn, bt vr h lrr. Wht : z. nth (plt rnd : n.

GEEA ESCIIO Aftr th ttl f rn th rtrnn br f th .E.. hd n hrd thn t bt th pn, th nrl prn bn tht pn dnd t tp drn tn t t f dt, bt—nd th ft tht nnt b vdd—t nvr ntndd t tp drn tn. h pn dnd t ffrd n f prttn nt lht rrd fhtn vhl, i.e., th tp f vhl hh th Grd r ll t hv t dl th, rtnl n th rl t f thr n rbrn r brn lndn n r t. It vr prtnt tht th Grd rlz th bfr dbt r t t pblt. An xpl t prv th pnt tht n ld nvr thn f pttn nt bxn rn bntht t fht hvht nl n drd th plt nnhltn f th bntht. In r td f th pn t vtl t t t n ht t n d, h nd hn t n d t, nd, hvn rpd tht, nt t xpt rl fr t. lzn th jb t dnd fr, t frtl pn—n ft, thr nt bttr.

CAACEISICS n ht pn ll d n t hv nld f t n hrtrt. h r : ( Extrl rt t rn f 00 rd nd bl. ( Gd pntrtn ( " ntrtn ". ( Et n bv zzl flh, hh t b n drd hn tn th pn. IIG (v Crt dtnt zzl blt, hh l ftr t b brn n nd hn tn. Grd prnnl ll hv lttl hn f frn th pn t th prpr rn n t th rt dtn th . (v It rnbl lht, nbln t t b vd l bllt trvl. It ntrtn t nt tht t rh t fr fr n ptn t nthr. th .00 bllt. hr r, ntrll, f rn hh hv th rrd dnr r. h d nt, hvr, prvnt pr t bn btnd, nd thr r t rnzd thd : EEAIOS ( 0th l, frn th .22 ntn. ( rn t 2 rd nt n pn rn tp btt. Whn t fr? h n b ddd nl b th frr, hvn t.h rdnr 0rd rn ntbl lr nld f th pntrtv pr f th . bllt. ntl trnthnd t prvnt pntrtn.

llt n llt trn t n llt trn t n n drt ht nl f 20 dr nl f 4 dr MAI AS Yrd Inh MM. Inh MM. Inh MM. 00 . 2.2 .6 .0 .4 .0 ( l rdr (. 00 .82 20. .6 6.0 .8 .6 (b rrl (2. 00 .4 8.8 .60 . . 8.8 ( rht brt nd frht (. (d d (4. h pn l fl fr pntrtn h nd nd b plnt. h x pntrtn t b xptd ( Crdl (. n th fr f frn : (f rnnn (6. ( rnt pprt (. . 4 nh. ( r ll . . . (h tl rp (8. ( Sndb . . . . 0 nh. ( ht brt nd bht (. OE. It is important to realize that the range to the target (j Ch rt (0. is not the only factor in answering the question" When to fire? " ( Shldr p (. The second, and perhaps the more important, is " When can I be ( Shldr p rp (2. CEAI of getting penetration? " This is governed by the firer's determination not to fire until he is sure of a kill. ( Ol bttl (.

MAGAIE REMOVING AND REPLACING THE BOLT h zn pltfr f th rfl h rd prtn hh EMOIG prvnt th blt bn ld hn th zn pt. h ft th n th rfl ltd t th rr f th bd h fft f th t prvnt th n hvn prt n blt (4 nd n th lfthnd d. npltn nl d rnd r vlbl. h th ft th frrd, r th blt lvr t t hht Whr d rnd r nt vlbl th blt n b d ptn nd thdr th blt pltl t th rr. t prt b th nrtn f hlfpnn ndr th lp f th h jtr tp ttd jt n rr f th zn th zn, th nbln th n t btn th prt nr nd dtl vr th blt. r th jtr tp th th fr rldn tht hh fr fft t nrl b thb f th lft hnd nd rv th blt fr th bd. rdd. EACIG Before attempting to replace the bolt, the following points must be noted : (i) Hold the bolt with the knob of the bolt lever upwards and pointing to the right. (ii) Ensure that the ring of the cocking piece (15) is vertical and in alignment with the lower portion of the bolt lever. (iii) The ejector (16) must be on top of the bolt, and in line with the lower portion of the bolt lever. This will auto- matically position the extractor (17) correctly. Lay the bolt on the bolt way, taking care that it is perfectly flat. Push the bolt forward as far as it will go, then turn the bolt lever down to the right. It is important to ensure that it is com- pletely pressed down. The mainspring (20) should now be released by pressing the (22), and the catch will be applied by rotating it to the rear.

PLACING ON AND REMOVING THE

ACIG O Hold the magazine in the right hand, fingers on the right-hand side, thumb on the left, with the larger portion of the magazine to the rear and the magazine platform downwards. Tilt the rear of the magazine upwards, inserting the forward portion into the magazine way, allowing the two lugs on the for- ward position of the magazine to rest on the sides of the maga- zine way. Push the magazine fully forward, pressing the rear portion downwards until it is engaged by the magazine catch.

EMOIG Place the palm of the right hand in rear of the magazine catch, the fingers and thumb assuming a similar position to that when placing on. Press the magazine catch with the palm, when the rear of the magazine will be released. The magazine can now be removed. STRIPPING AND ASSEMBLING THE BOLT h tn f prn th blt lvr dnrd brn th It is of the utmost importance that no attempt be made to strip rf n ntt, drn th blt frrd nt th or interfere with the bolt. Misfires will occur if this instruction is b f th rtrd. not complied with. h ln hldr n th blt r n n lnnt th The stripping and assembling of the bolt must only be carried th ln r n th bd. out by a qualified armourer. Whn th blt lvr fll prd dn th brh ld. rn th frrd vnt th n p hld b b th r, th prn th nprn nd n MECHANISM th tn.

OEIG E EEC A WIAWIG E O O AYIG E SAEY CAC On rn th blt lvr, th ln hldr n th blt On trnn th ft th t th rr t n n th blt dn fr th r n th bd (4. h tn l nd n th n p, th prvntn th blt lvr fr thdr th blt lhtl b th tn f th blt lvr brn bn rd r th n p thdrn. nt th rr rf f th bd, prttn prr x Shld th tn b d hn th ft th ppld, trtn. th ppr prjtn ll prvnt th n p n h vnt l th n p t b frd frrd. b b th n th blt, th thdrn th trr fr th f f th blt. ECOI On thdrn th blt frthr t th rr, th jtr tp h rdn f th fft f th rl btnd fll : ntr th lt n th jtr (6 nd hld t. A th blt tll ( l rdr (. h hrt dtn t trvl, th jtr ph th pt ff th f f th blt. It thn fll thrh th pnn n th ( ffr prn (2. btt f th bd. h jtr tp prvnt frthr vnt ( Srb pd n hldr p (. f th blt t th rr. A prtn f th p ln th b nd tr th rr f f th dfltr, th tndn t fr th brrl fr O ESSIG E IGGE rd, rdn rl. On th h f dhr tn pl, th brrl rl nd On prr bn ppld, th trr (22 rtt nd lft th pr th bffr prn, th rdn th rl trn trr pl (2. h hd f th trr pl br nt th ttd t th frr t n. ndrd f th hd f th r (2, lln th r t rtt, Sh rl trnttd t th frr d ndrbl th dnn t fr th n p. b th Srb pd n th hldr p. h n p nd trr n fl frrd ndr th nfl n f th prd nprn (20. h trr pl hld n th prd ptn b th trr prn (24 nd th brn pn n th ptl rp (8. FRONT SUPPORT h frnt pprt ( h bn dnd t : O COSIG E EEC ( Gv pprt t th rfl. On phn th blt frrd, th jtr tr th b f ( rt f th brrl bn lvtd r dprd. th rtrd n th zn, frn t nt th hbr. h h flln n prt r nrprtd n th frnt blt lvr p nt th f n th rr f th bd. h pprt : prjtn n th frnt f th blt n in ln th th (a) vt. r in th bd (4. (h n. 2 (c) Catch. MAGAZINE FILLING AND EMPTYING (d) Sleeve. IIG ( Foot. The following positions may be adopted for filling : (a) Kneeling on both knees—magazine resting on thigh. Invariably the rifle will be fired with the front support resting on its foot. Occasions, however, may occur when it will be neces- (b) Kneeling on one knee—magazine resting on knee. sary to fold the front support under the rifle. This can be done by (c) Sitting—magazine resting on thigh or ground. pressing the front support catch and at the same time drawing (d) Lying—magazine resting on the ground. the front support backwards and upwards towards the barrel. The position to be adopted will depend on circumstances. To elevate the barrel, rotate the sleeve in a clockwise direction Adopt the required position, holding the magazine in the hand —to depress the barrel rotate the sleeve in the opposite direction. with the narrowest portion of the magazine towards the body. Take a in the other hand, holding it with the base of the cartridge pointing towards the magazine. Press down on the platform with the thumb of the hand hold- ing the magazine. Place the cartridge on the magazine, base just MAGAZINE clear of the magazine lips. Press the cartridge downwards and forwards until positioned under the magazine lips; repeat this This is an overhead box type consisting of the following until the magazine is filled with five rounds. parts : t. fill a magazine correctly and with speed requires (a) Case. much practice. The standard to be aimed at is a complete filling in 20 seconds. (b) Plate. EMYIG (c) Platform. Hold the magazine with the base of the rounds uppermost. (d) Spring. Using another round, place the side of the bullet on the base of the round in the magazine and force it downwards and out of The occasions on which it will be necessary to strip the maga- the magazine. Continue this action until the magazine is empty. zine for cleaning will be rare, and serious damage will occur if continual stripping is allowed. LOADING AND UNLOADING t.—h actions of loading are explained here with the firer in the lying position. The actions, however, may be per- SIIG E MAGAIE formed in any service position. Disengage the stud on the plate. Draw the plate clear of the OAIG case, taking care to prevent the spring from flying out. With- draw the spring and platform. Lie down behind the rifle, body in direct alignment with it, legs close together. Push the safety catch forward, and place on the magazine. ASSEMIG O MAGAIE Open and close the breech, remembering the point that the bolt lever must be pressed right down. Apply the safety catch. Position the platform in the case and compress the spring. The right hand must now be placed on the grip (8), Slide the plate on to the case, when the stud should reposition thumb on the left, forefinger along the outside of the trigger itself. Should it fail to do so, a tap with the hand will normally guard, remaining fingers round the front and pointing back- bring it into position. wards. 14 15 h lft hnd rp th hldr p rp (2, thb ndr nth, fnr n tp. UOAIG h th ft th frrd, rv th zn, pn nd l th brh, pr th trr, ppl th ft th nd tnd lr.

OIG, SIG SEIG, AIMIG A IIG OIG th hldr p nt th hldr, n rtn t n fr ntt. r th h n t th h rt, pl th frfnr f th rht hnd n th trr nd t th frt prr. h rp t b fr n, nd t bttr t p th lb lr f th vr. h ll nt b pbl f frn fr th ln ptn. h dvnt t b nd fr hvn th lb lr tht t nbl bttr n t b tn hn dln th vn trt. SIG SEIG Whn th rfl h vbl bht, djt ht b vn thr t th rht r th lft. t.—Whn aiming at a moving target the swing must be even and must not be checked at the moment of taking the second pressure.

IIG The method of firing is the same as with the .300 rifle. The grip must be firmer than that with the ordinary rifle. Once a round has been fired there must be instant reloading. This is most important, and must be practised until a high stand- ard of efficiency is reached, otherwise a second shot may not be possible. Having fired the last round in the magazine, and on attempt- ing to reload, it will be found that the bolt will not go forward owing to the bolt coming in contact with the raised portion of the magazine platform. This raised portion lies in front of the rear portion of the magazine. Unless the bolt is withdrawn fully to the rear it will be found impossible to place on another magazine because the AIMIG (SAIOAY AGE front end of the bolt will prevent the rear portion of the maga- The rules to be observed are as follows : zine from entering the magazine way. (a) Keep the sights upright. The point to note here is—on the magazine becoming empty, (b) Look through the aperture and align the top of the fore- ensure that the bolt is fully withdrawn to the rear before attempt- sight in the centre of the target. Endeavour to keep the ing to place on another magazine. aim in the centre of the aperture. t. The above rules also apply to targets which are directly approaching or retiring.

AIMIG (MOIG AGE The rules to be observed are as follows : When the target is vn drtl across the front of the rifle (a) Keep the sights upright. (b) Look through the aperture and align the foresight one target's width in front of the target and in line with the centre of it. Endeavour to maintain this aim in the centre of the aperture. When the target is vn bll (a) Keep the sights upright. (b) Look through the aperture and align the foresight on the front edge of the target and in line with the centre of it. Endeavour to maintain this aim in the centre of the aperture. 18 IIG OSIIOS A SIIG h ptn hh v th bt rlt nd t trll n btnn d fr fft r : ( Sttn. ( Knln. ( Stndn. h ln ptn n b d, bt nt tbl fr ttn th bt rlt, prtlrl nt vn trt. h r thrh hh th rfl n b n hn n th ln ptn vr ll tht lttl fr fft n b xptd. Whn tn th rfl fr prtlr t, th flln pnt t b brn n nd : ( Ablt t ht th fln nd rr f th trt. ( h fld f fr hld b dt. ( h tt hld b d f n vlbl vr. (v br th hrtrt ntnd prvl— zzl flh nd zzl blt—nd ll fr th. (v An ltrntv ptn t b ltd nd rt t t rnntrd. h ptn ltd ll nrll b pd b t n, n th frr, th thr th brvr. h lttr hld l t n th rl f prttr fr th frr. It t b brn n nd tht th rfl n b frd fll tht th brvr bn prnt. 2 CLEANING MAEIAS Breech Cover.—The cover affords protection for the body and mechanism and should be kept on the rifle whenever it is not actually in use. It also acts as a hold-all for the cleaning materials. Cleaning Rod.—The rod is sectioned to permit of its being carried in the breech cover. It consists of handle, through which is the cord, attached to the handle is one of the sections of the rod. There are three other sections, the cord passing through each. At the end of the rod there is a small which is externally threaded to take the loop. To assemble, hold the handle in the left hand and pull the cord. This has the effect of joining up all the sectioned pieces. To enable it to be retained in position, fix the cord in the slot provided in the handle. The rod is carried in the long pocket on the right-hand side of the breech cover. Loop.—This is a solid tube internally threaded at one end for securing to the rod. The other end has an eyelet for the insertion of the flannelette. The loop is carried in the pocket on the left-hand side of the breech cover; flannelette may also be carried in this pocket. Pullthrough.—This consists of a 9-foot length of rope with a loop in the centre to take either gauze or flannelette. If no rod is available it would be carried in the long pocket on the right-hand side of the breech cover. Gauze.—This is a piece of fine wire mesh 3½ in. by 31 in. It will be used in exactly the same way as the gauze is used on the Service rifle. The gauze is carried in the same pocket as the loop. Wire Brush. This is a very stiff wire brush, used for cleaning the barrel. At one end there is a small brass tube internally threaded to enable it to be connected to the cleaning rod. This brush is carried in the same pocket as the loop. Bristle Brush.—The brush is secured to a long wire handle. It is used for cleaning the chamber. This brush is carried with the cleaning rod. Combination Tool.—This tool is shaped like a spanner at one end, to be used for the removal of the recoil reducer (this should AACME O OYS AIAK only be removed by a qualified armourer). The other end is bent and shaped like a screwdriver to permit the removal of the IE O EMI IIG WI .22 deflector. AMMUIIO The combination tool is carried with the cleaning rod. GENERAL O CEA E IE To enable men to get sufficient practice in aiming and swing- Remove the bolt and magazine, remove the deflector from ing with the Boys anti-tank rifle an attachment has been de- the recoil reducer by unscrewing the screws, using the combina- ' signed which, when fitted to the Boys anti-tank rifle and a .22 tion tool. rifle, allows this practice and at the same time fires .22 ammu- All dirt, old oil and fouling should be removed from both the nition. deflector and the recoil reducer. Once cleaned it should be left This attachment consists of the following : in a slightly oiled condition. (a) Front bracket (30). Clean the barrel in a similar way to cleaning a Service rifle, (b) Rear bracket (31). using the cleaning rod; the size of the flannelette to be 6 in. by (c) Plate (32). 4 in. Re-oil the barrel, using oily flannelette 4 in. by 4 in. (d) Clamp with wing nuts (33). The chamber will be cleaned with the bristle brush, which should be surrounded by flannelette to prevent the brush getting (e) Trigger connector (34). too dirty to clean the chamber. All other parts of the rifle will be dry-cleaned and then left in DESCRIPTION a slightly oily condition. O ACKE As with the Service rifle, the barrel and chamber should be The front bracket is a clamping attachment for fitting to the dry before firing. It is also advisable to dry out the recoil reducer, barrel of the anti-tank rifle; it also acts as a support for the nose- but it is realized that this will not always be possible. cap of the .22 rifle. It consists of a semi-circular portion, which is slotted to fit over the foresight bracket. This semi-circular portion has a right-hand extension, which is also slotted to take the standard of the .22 rifle. EA ACKE The rear bracket is attached to the butt of the .22 rifle and to the anti-tank rifle. It is a flat, iron bar, to which is riveted a semi-circular fitting lined with leather. This part is set at an angle to take the small of the butt of the .22 rifle. An elongated slot is situated in the centre of the iron bar. AE The object of this is to attach the rear bracket to the anti-tank rifle. The plate is a flat, iron bar; it has a hole in the centre, and each end is recessed to permit fitting to the upper tubes of the anti- 24 tank rifle. 25 CAM h prtn lp th btt f th .22 rfl t th rlr prtn f th rr brt. h lp Uhpd, lnd th lthr, nd t h t rd t t th n nt. IGGE COECO h prp f th t nnt th trr f th nttn rfl th th trr f th .22 rfl. h prtn nn th lp ft bhnd th trr f th nttn rfl. h t r f th lp p n h d f th nttn rfl trr rd. Atthd t th lp b nt nd blt thn rd. h rd p fr th lp t th trr f th .22 rfl, th nd f th rd bn hpd t ft rnd th trr f th .22 rfl.

ASSEMY ld th frnt brt th th xtndn prtn pntn t th rht nd tth t t th nttn rfl. Inrt th plt btn th brrl nd th fr tb dtl n rr f th trnnn. ld th rr brt ndr th fr tb nd dtl bl th plt. Inrt th r n th lntd lt nd nt th thrdd hl n th plt nd r p. l th bnt tndrd f th .22 rfl n th lttd pr tn f th frnt brt dr th .22 rfl b bt hlf n nh. r th btt f th .22 rfl n t th rr brt. l th lp vr th ll f th btt nd r p t th rr brt. Atth th lp n rr f th trr f th nttn rfl tth th rd t th lp b n f th nt nd blt. th rd t th trr f th .22 rfl nd h t n.

AUSME Adjt th lnth f th trr nntr t ll th n p f th .22 rfl t b rld hn th trr f th nt tn rfl prd, nd r th lp. trl djtnt f th .22 rfl btnd b lhtl n rn th thb r f th rr brt nd vn th btt n th rrd drtn. Whn rrtl ptnd r p th thb r. 26 2 Adjustment for elevation will not be necessary, as the front bracket is so fitted that the correct elevation is automatically obtained.

EOIG Load the .22 rifle. Aim and fire the anti-tank rifle. The shot should hit the selected mark. If it does not, adjust the .22 rifle as previously explained and fire again until the aim of the anti- tank rifle and the shot of the .22 rifle coincide.

E SAA MIIAUE 0 SCAE AGE The following points must be borne in mind when construct- ing the apparatus necessary for a range of this type : (i) On a scale of 1 / 30th, a representative tank target 4.4 in. by 2 in., moving at 1 foot per second at a range of 15 yards, would represent a light tank, size about 111 feet, travelling across the line of the anti-tank rifle at 20 miles per hour at a range of 450 yards. (ii) If the representative target has a run of 11 feet, the time taken to complete the run should be 11 seconds. During this time the anti-tank rifle would, at a range of 15 yards, move through an arc of 14 degrees. (iii) To be able to judge whether the firer is aiming the re- quired amount in front, scoring areas similar to the representative target must be inscribed in front of the actual target. The distance these scoring areas should be in front and in rear (this enables a run in the oppo- site direction) of the actual target is the length of the target less .6 of an inch. This correctly allows for the time of flight of the .22 bullet during its 15 yards of flight. The strawboard on which the target and scoring areas are attached should be 18 in. by 10 in: the target and scoring areas will be 12 in. long.

ESCIIO O AAAUS This consists of two uprights about 4 feet high, but if used from the ricochet pit of a 30-yards range would be higher. The uprights are slotted at the top to allow for the laying in of a board 12 feet long. 28 29 h d f th brd fr rv n hh rnnr trvl. h lttr d f hrdd nd hpd t trvl thl n th rv. On th d f th rnnr r rd t pr f thrpl brt, h tn tn lp, hh hld th trbrd n hh th trt ntd. rd r tthd t h n h d f th rnnr. 0 h p rnd h t th nd f th rnnr nd r tn b t th frnpnt t t ndn dr. On d f th brd frn th rnnn tr trht t 0 ll lvl vnt f th trt. h thr d hpd. h b rvrn th brd n ndltn rn ll b btnd. t.—An ntr rn r 0rd rn tbl fr th rtn f th pprt. h nrl ft prtn ll b brvd.

E IMOISE AGE Whn t nt pbl t btn th pprt ntnd bv, th flln prvd pprt ll b fnd fl :

ESCIIO O AAAUS lnth f d (brnh f tr ll d, bt 4½ ft n hht nd bt fr 2 t 4 nh th. prn ppr lp ( nh d dl. Abt 40 rd f trn (frl trn. hr tpl. 2 rd f r (ll . nh nl.

ASSEMY rv th t lnth f d n th rnd bt 0 rd prt. tn th r hn. l th tpl t th thr pl rd. h t d fr th trn. nd th t nh nl nd p th thrh th hl n th ppr lp. In th ptn th ll hld th trbrd t th r. 0 tn th trn t th ntr f th nl, p thrh th tpl nd t b t th frnpnt t th t ndn dr. v th trbrd fr th drt rn r t th dnl r, rv nl nd bl n dnl r.