DOCSLIB.ORG

Manuel D'utilisation Manual Del Operador 18 Volt Hammer Drill

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Manuel D'utilisation Manual Del Operador 18 Volt Hammer Drill OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR 18 VOLT HAMMER DRILL PERCEUSE À PERCUSSION DE 18 V TALADRO DE PERCUSIÓN DE 18 V P214 INCLUDES: Hammer Drill, Auxiliary Handle INCLUT : Perceuses à percussion, poignée INCLUYE: Taladros de impacto, mango Assembly, Depth Stop Rod, Operator’s auxiliaire, tige de butée de profondeur, auxiliar, barra limitadora de profundidad, Manual manual del utilisation manual del operador TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO **************** **************** **************** General Power Tool Safety Warnings Avertissements de sécurité générales Advertencias de seguridad para relatives aux outils électriques ........2-3 ........................................................2-3 herramientas eléctrica ................... 2-3 Avertissements de sécurité relatifs Drill-Driver Safety Warnings ...............3 Advertencias de seguridad de perceuses à percussion .....................3 Symbols ..............................................4 taladros de impacto ...........................3 Symboles ............................................4 Símbolos ............................................4 Features ..............................................5 Caractéristiques .................................5 Características ...................................5 Assembly ............................................5 Assemblage ........................................5 Armado ..............................................5 Operation .........................................6-9 Utilisation ........................................6-9 Funcionamiento ............................. 6-9 Maintenance .......................................9 Entretien .............................................9 Mantenimiento ...................................9 Illustrations ..................................10-11 Illustrations ..................................10-11 Illustraciones .............................. 10-11 Parts Ordering and Service Commande de pièces et dépannage Pedidos de piezas y servicio ............................................Back page ......................................... Page arrière ......................................Pág. posterior WARNING: To reduce the AVERTISSEMENT : Pour ADVERTENCIA: Para reducir risk of injury, the user must read and réduire les risques de blessures, el riesgo de lesiones, el usuario debe leer understand the operator’s manual l’utilisateur doit lire et veiller à bien y comprender el manual del operador before using this product. comprendre le manuel d’utilisation avant antes de usar este producto. d’employer ce produit. SAVE THIS MANUAL FOR CONSERVER CE MANUEL GUARDE ESTE MANUAL FUTURE REFERENCE POUR FUTURE RÉFÉRENCE PARA FUTURAS CONSULTAS GENERAL POWER TOOL SAFETY WARNINGS Use personal protective equipment. Always wear eye WARNING protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection Read all safety warnings and all instructions. Failure to used for appropriate conditions will reduce personal follow the warnings and instructions may result in electric injuries. shock, fire and/or serious injury. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source Save all warnings and instructions for future reference. and/or battery pack, picking up or carrying the tool. The term “power tool” in the warnings refers to your mains- Carrying power tools with your finger on the switch or operated (corded) power tool or battery-operated (cordless) energising power tools that have the switch on invites power tool. accidents. WORK AREA SAFETY Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a Keep work area clean and well lit. Cluttered or dark rotating part of the power tool may result in personal injury. areas invite accidents. Do not overreach. Keep proper footing and balance Do not operate power tools in explosive atmospheres, at all times. This enables better control of the power tool such as in the presence of flammable liquids, gases in unexpected situations. or dust. Power tools create sparks which may ignite the dust or fumes. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away Keep children and bystanders away while operating a from moving parts. Loose clothes, jewellery or long hair power tool. Distractions can cause you to lose control. can be caught in moving parts. ELECTRICAL SAFETY If devices are provided for the connection of dust Power tool plugs must match the outlet. Never modify extraction and collection facilities, ensure these are the plug in any way. Do not use any adapter plugs with connected and properly used. Use of dust collection earthed (grounded) power tools. Unmodified plugs and can reduce dust-related hazards. matching outlets will reduce risk of electric shock. Do not wear loose clothing or jewelry. Contain long Avoid body contact with earthed or grounded surfaces hair. Loose clothes, jewelry, or long hair can be drawn such as pipes, radiators, ranges and refrigerators. into air vents. There is an increased risk of electric shock if your body Do not use on a ladder or unstable support. Stable is earthed or grounded. footing on a solid surface enables better control of the Do not expose power tools to rain or wet conditions. power tool in unexpected situations. Water entering a power tool will increase the risk of electric shock. POWER TOOL USE AND CARE Do not force the power tool. Use the correct power Do not abuse the cord. Never use the cord for carrying, tool for your application. The correct power tool will pulling or unplugging the power tool. Keep cord away do the job better and safer at the rate for which it was from heat, oil, sharp edges or moving parts. Damaged designed. or entangled cords increase the risk of electric shock. Do not use the power tool if the switch does not turn When operating a power tool outdoors, use an it on and off. Any power tool that cannot be controlled extension cord suitable for outdoor use. Use of a cord with the switch is dangerous and must be repaired. suitable for outdoor use reduces the risk of electric shock. Disconnect the plug from the power source and/or If operating a power tool in a damp location is the battery pack from the power tool before making unavoidable, use a ground fault circuit interrupter any adjustments, changing accessories, or storing (GFCI) protected supply. Use of a GFCI reduces the power tools. Such preventive safety measures reduce risk of electric shock. the risk of starting the power tool accidentally. Use battery only with charger listed. For use with Store idle power tools out of the reach of children and 18V nickel-cadmium and 18V lithium-ion battery packs, do not allow persons unfamiliar with the power tool see tool/appliance/battery pack/charger correlation or these instructions to operate the power tool. Power supplement 987000-432. tools are dangerous in the hands of untrained users. PERSONAL SAFETY Maintain power tools. Check for misalignment or Stay alert, watch what you are doing and use common binding of moving parts, breakage of parts and any sense when operating a power tool. Do not use a power other condition that may affect the power tool’s tool while you are tired or under the influence of drugs, operation. If damaged, have the power tool repaired alcohol or medication. A moment of inattention while before use. Many accidents are caused by poorly operating power tools may result in serious personal injury. maintained power tools. 2 — English GENERAL POWER TOOL SAFETY WARNINGS Keep cutting tools sharp and clean. Properly maintained screws, or other small metal objects, that can make cutting tools with sharp cutting edges are less likely to a connection from one terminal to another. Shorting bind and are easier to control. the battery terminals together may cause burns or a fire. Use the power tool, accessories and tool bits etc. Under abusive conditions, liquid may be ejected from in accordance with these instructions, taking into the battery; avoid contact. If contact accidentally account the working conditions and the work to be occurs, flush with water. If liquid contacts eyes, performed. Use of the power tool for operations different additionally seek medical help. Liquid ejected from the from those intended could result in a hazardous situation. battery may cause irritation or burns. BATTERY TOOL USE AND CARE SERVICE Recharge only with the charger specified by the Have your power tool serviced by a qualified repair manufacturer. A charger that is suitable for one type person using only identical replacement parts. This will of battery pack may create a risk of fire when used with ensure that the safety of the power tool is maintained. another battery pack. When servicing a power tool, use only identical Use power tools only with specifically designated replacement parts. Follow instructions in the battery packs. Use of any other battery packs may create Maintenance section of this manual. Use of unauthorized a risk of injury and fire. parts or failure to follow Maintenance instructions may When battery pack is not in use, keep it away from create a risk of shock or injury. other metal objects, like paper clips, coins, keys, nails, HAMMER DRILL SAFETY WARNINGS Wear ear protectors with impact drilling. Exposure to Do not place battery tools or their batteries near fire noise can cause
Load more

Recommended publications
  • Instruction Manual Read Instructions Before Operating This Tool
    SDS4 HAMMER DRILL Instruction Manual Read instructions before operating this tool. G10100 www.evolutionfury.com SDS4 HAMMER DRILL EC - DECLARATION OF CONFORMITY SDS HAMMER DRILL FIG 1 FIG 2 EC - DECLARATION OF CONFORMITY GB Congratulations on your purchase of an Evolution Power We, the importer Tools SDS4 4 Function Hammer Drill. Please complete Evolution Power Tools Ltd. your product registration on line to validate your machine’s Venture One warranty period and ensure prompt service if needed. We Longacre Close sincerely thank you for selecting a product from Evolution Sheffield Power Tools. S20 3FR WARRANTY GB Declare that the product Part numbers: ZIC-SD6A-20 12 MONTH LIMITED WARRANTY. Evolution power tools Evolution: SDS4 reserves the right to make improvements and modifications SDS 4 Function Hammer Drill to design without prior notice. Complies with the essential requirements of the following Evolution Power Tools will, within twelve (12) months from European Directives: the original date of purchase, repair or replace any goods 2006/42/EC – Machine Directive found to be defective in materials or workmanship. This 2006/95/EC – Low Voltage Directive warranty is void if the tool being returned has been used 2004/108/EC – EMC Directive to drill / chisel materials beyond the recommendations 2002/95/EC – Restriction of the use of Certain Hazardous in the Instruction Manual or if the drill has been damaged Substances in Electrical and Electric Equipment by accident, neglect, or improper service. This warranty does not apply to machines and / or components which Standards and Technical specifications referred to:- have been altered, changed, or modified in any way, or EN 55014-1:2006 subjected to use beyond recommended capacities and EN 55014-2/A1:2001 specifications.
    [Show full text]
  • Repair Prices
    REPAIR PRICES MODEL RETAIL MVP DESCRIPTION NUMBER PRICE REPAIR PRICE BENCHTOP – MITER-TABLE SAWS CUT-OFF-TILE SAWS 3814 $199.00 $125.37 14" Benchtop Abrasive Cutoff Machine 3912 $201.96 12" Compound Miter Saw 4100 $333.54 10" Worksite Table Saw 4310 $354.96 10" Dual-Bevel Slide Miter Saw with Upfront Controls 4405 $295.80 10" Single-Bevel Slide Miter Saw with Upfront Controls 4412 $398.82 12" Dual-Bevel Slide Miter Saw with Upfront Controls 5312 $408.00 12" Dual-Bevel Slide Miter Saw with Upfront Controls 4100-09 $599.00 $377.37 10 In. Worksite Table Saw with Gravity-Rise™ Wheeled Stand 4212L $287.64 12" Dual-Bevel Compound Miter Saw with Upfront Controls & Laser Tracking 4410L $402.90 10" Dual-Bevel Slide Miter Saw with Upfront Controls & Laser Tracking 5412 $463.08 12" Dual-Bevel Slide Miter Saw with Upfront Controls CM10GD $599.00 $377.37 10 In. Dual-Bevel Glide Miter Saw CM12 $208.08 12" Single-Bevel Compound Miter Saw CM12SD $345.87 12" Dual-Bevel Slide Miter Saw CM8S $449.00 $282.87 8-1/2 In. Single-Bevel Slide Miter Saw GCM12SD $649.00 $408.87 12" Dual-Bevel Glide Miter Saw GTS1031 $379.00 $238.77 10 In. Portable Jobsite Table Saw TC10 $581.40 10" Wet Tile and Stone Saw CONCRETE – DEMOLITION-ROTARY HAMMERS • HAMMER DRILLS 11240 $256.02 1-9/16" SDS-max® Combination Hammer 11247 $245.82 1-9/16" Spline Combination Hammer 11248 $312.12 1-9/16" Spline Combination Hammer 11304 $887.00 Brute™ Breaker Hammer 11387 $314.16 Round Hex Demolition Hammer 11388 $314.16 SDS-max® Demolition Hammer 1194AVSR $75.11 1/2" Dual Torque Hammer Drill
    [Show full text]
  • Hammer Drill
    Hammer Drill 15 mm (9/16”) MODEL HP1501 004187 DOUBLE INSULATION INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS Model HP1501 Concrete 15 mm (9/16”) Capacities Steel 13 mm (1/2”) Wood 25 mm (1”) No load speed (RPM) 0 - 2,800/min. Blows per minute 0 - 44,800 Overall length 299 mm (11-3/4”) Net weight 1.7 kg (3.7 lbs) • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 3. Keep bystanders, children, and visitors away while operating a power tool. Distrac- 1. Keep your work area clean and well lit. tions can cause you to lose control. Cluttered benches and dark areas invite acci- dents. Electrical Safety 2. Do not operate power tools in explosive 4. Double insulated tools are equipped with atmospheres, such as in the presence of a polarized plug (one blade is wider than flammable liquids, gases, or dust. Power the other.) This plug will fit in a polarized tools create sparks which may ignite the dust outlet only one way. If the plug does not fit or fumes. fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- 2 trician to install a polarized outlet. Do not 13.
    [Show full text]
  • HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1
    HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1 Makita HM1304B HM1810 Large Makita 1-1/8” Small Hex HM1500 HK1810 SDS Plus Shank SDS Max Shank 3/4” Hex Shank D10 D8 D3 D2 D1 HK1820 D9 D7 D6 D5 D4 D3 D2 D1 D16 D11 D9 D7 D6 D5 D4 D3 D2 D1 SDS max HK1820L 3/4” Hex 21/32” SDS Round Shank Plus HM0860C HM1100C HM1202C HK0500 HM1211B ROTARY HAMMER BITS CHART SDS PLUS SHANK HR3210C R1 HR3210FCT R8 IS ADAPTER WHICH ALLOWS OLDER TOOLS TO USE DEMOLITION BITS R6 HR2811F Metal R3 R2 HR3000C Wood R4 SDS Plus HR2432 D1 R23c R23b R23 R23a HR2455 R9 R8 R10 HR2470F / FT HR160DWA & HR2400 only SDS MAX SHANK D4 R1a HR5210C D5 HR5211C D1 D11 D6 HR4010C SDS HR4011C D2 HR4510C D16 D15 max HR4511C SDS Max D18 D9 D3 HR4002 R24c R24b R24 R24a HR4500C SPLINE SHANK & 3/4” HEX SHANK 21/32” Round Shank D4 D2 3/4” HEX Shank 21/32” Round Shank D5 D3 HR3851 D8 D6 R6 D7 HR4040C R1b D1 D18 D17 R24a R24c R24b R24 D16 HR5000 Taper Shank R5 Spline Shank 67 HAMMERS DEMOLITION HAMMER BITS CHART Demolition Hammer Bits Chart HM1202C, HM1100C, HR3210C/FCT, HM0860C, HR5210C, HR3000C, HR2811F, HR5211C, HR4510C, HM1810C, HM1304B HM1500 HK1810 HR2455, HR2432, Model HR4511C, HR4500C, HR2470F/FT, HK1820, HR4010C, HR4011C, HK0500 HR4002 Ref. No. Description 1-1/8" Hex 3/4" Hex Makita Large Makita Small SDS Plus 3/4" Hex, 21/32" Round SDS Max Hex Shank Size Part No.
    [Show full text]
  • Rotary Hammer Drill
    WHAT’S IN THE BOX MAINTENANCE TROUBLE SHOOTING SOUND & VIBRATION ELECTRICAL SAFETY • Keep the ventilation vents of the drill clean at all times. Sound and vibration values were measured in accordance with EN WARNING! When using mains-powered tools, basic safety precautions, including the If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard. • After each use, blow air through the drill housing to ensure it is free from all Problem Cause Remedy For EU countries only following, should always be followed to reduce risk of fire, electric shock, personal injury 60745. and material damage. Note: Double insulation does not take the place of normal safety precautions when operating this tool. The dust particles which may build up. Build up of dust particles may cause the Rotary Hammer No power supplied Make sure all plugs are Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, insulation system is for added protection against injury resulting from a possible electrical insulation failure ROTARY drill to overheat and fail. connected and power Never place any electric power tools in your household refuse. before operating the tool. within the tool. Drill is not working Lpa sound pressure level: 91.8 dB Rotary Hammer Drill • If the enclosure of the drill requires cleaning, do not use solvents but a moist outlet is in working order K uncertainty: 3 dB Save these instructions and other documents supplied with this tool for future reference.
    [Show full text]
  • M18 FUEL™ 2-Tool Combo Kit
    9/10/2018 M18 FUEL 2 Power Tool Combo Kit (2999-22) | Milwaukee Tool PRODUCTS (/PRODUCTS) SUPPORT INNOVATIONS (/INNOVATIONS) (/) SIGN UP / LOG IN View More + NEW M18 FUEL™ 2-Tool Combo Kit Our M18 FUEL™ two-tool combo kit delivers the most advanced 18-Volt cordless cutting, drilling and fastening power tool technology in the industry. This kit features two M18 FUEL™ 18-Volt lithium-ion brushless cordless tools including our ½ in. Hammer Drill/Driver (2804-20) and our SURGE™ 1/4" Hex Hydraulic Driver. Our M18 FUEL™ tool system is fully compatible with the MILWAUKEE® M18™ 18-volt cordless system. These power tools feature the most advanced cordless technology in the industry; a POWERSTATE™ Brushless Motor, REDLINK PLUS™ Intelligence tool technology, and REDLITHIUM™ Battery Technology, resulting in longer motor life, longer run time and more power. Our two-tool kit also includes two M18™ REDLITHIUM™ XC5.0 batteries, one M18™ and M12™ multi-voltage charger, a side handle, three belt clips, two bit holders, and one heavy-duty contractor bag. Close INCLUDES: (1) M18 FUEL™ SURGE™ 1/4" Hex Hydraulic Driver (2760-20) (/Products/Power-Tools/Fastening/Impact-Drivers/2760-20) (1) M18 FUEL™ ½” Hammer Drill/Driver (Tool Only) (2804-20) (/Products/Power-Tools/Drilling/Hammer-Drills/2804-20) (2) M18™ REDLITHIUM™ XC5.0 Extended Capacity Battery Pack (48-11-1850) (/Products/Batteries-and-Chargers/M18-Batteries-and- Chargers/48-11-1850) (1) M18™ & M12™ Multi-Voltage Charger (48-59-1812) (/Products/Batteries-and-Chargers/M12-Batteries-and-Chargers/48-59-1812) (1) Carrying Case (1) Side Handle (2) Belt Clip (2) Bit Holder Close https://www.milwaukeetool.com/Products/Power-Tools/Combo-Kits/2-Piece-Kits/2999-22 1/5 9/10/2018 M18 FUEL 2 Power Tool Combo Kit (2999-22) | Milwaukee Tool Where To Buy WHAT'S INCLUDED REVIEWS M18 FUEL™ ½” Hammer Drill/Driver (Tool Only) Cat.
    [Show full text]
  • Cordless Systems
    Cordless Systems Cordless Systems Hilti. Outperform. Outlast. Systems Cordless 47 Cordless Systems Introduction Introduction Page 49-50 Drill drivers Cordless compact drill driver SFC 22-A Page 51 Cordless hammer drill driver SFH 22-A Page 52 Accessories for drill drivers Page 55 Impact screwdrivers Cordless impact wrench SIW 22-A Page 53 Cordless impact wrench SIW 22T-A Page 54 Accessories for impact screwdrivers Page 55 48 Cordless Systems Complete mobility - Hilti cordless drills and drivers. With power you can rely on. More work per charge or less weight. Hilti Lithium CPC gives you the choice.– The capacity of a Hilti battery is matched to the tool’s intended use. You thus always have a choice between batteries that provide more lasting power and those that save weight. Systems One charger for all voltages. Cordless They’re simply unrivalled – only Hilti offers all-in-one chargers for 22 and 36 volt Li-ion batteries. The Hilti C 4/36-350 is a prime example. Its active cooling system prevents overheating and allows uniquely short charging cycles. More power Lithium-ion cells incorporating the latest technology provide unequalled power and capacity. Four LEDs keep you informed about the Hilti CPC battery’s state of charge. Higher reliability Electronic battery management and motor control for extra-long lifetime. Rubberized, impact-resistant, fi ber- glass-reinforced casings make the tools Air-cooled charging. and batteries exceptionally rugged. All rechargeable batteries get warm when charging, but overheating can result in damage. The charging procedure is thus a constant stop-and-go. The charger must repeatedly give the battery time to cool down.
    [Show full text]
  • Industrial, Concrete & Masonry Tools
    Industrial, Concrete & Masonry Tools F Tapcon® - SDS Plus Bits & Screws Core Bits For Rotary Hammer Drills ® Tapcon Half-Flat Shank Bits . F1 2 Pc . Taper Extension Type . F12 Tapcon® Installation Kit for Concrete Screws . F1 Accessories . F12 ® Tapcon SDS-Plus / Hex Drive Bits . F1 NEW! 2 Pc . Screw-On Extension Type . F12 Concrete Tapping Screws . F1 Accessories . F12 1 Pc . Solid Construction . F13 Accessories . F13 Masonry Drill Bits Fast Spiral / Set / Display . F2 NEW! ® Chisels - Masonry Monolock 1/4" Hex Power Shank . F2 Slow Spiral / Set / Display . F3 NEW! For Electric Hammers . F14 NEW! For Pneumatic Hammers . F15 NEW! Floor Scraper Chisels . F14 Carbide Hammer Drill Bits Roto-Percussion Drill Bits . F4 Diamond Core Bits Spline Shank Rotary Hammer Drill Bits Duo . F5 Segmented Wet Cutting . F16 Quadro . F5 Full Crown Wet Cutting . F16 NEW! SDS-Plus Rotary Hammer Drill Bits . F6 Segmented Dry Cutting . F17 NEW! SDS 4 x 4 Quadro Hammer Drill Bits . F7 Marble / Granite . F17 SDS-Max™ Hammer Drill Bits Accessories . F17 Duo . F8 Quadro . F8 Diamond & Carbide Tipped Drill Bits Hammer Drill Adaptors . F9 NEW! Hammer Drill Adaptor Extension System . F9 NEW! Diamond Core Drills for Hard Tiles / Ceramics . F18 NEW! Core Cutters for Rotary Hammer Drills . F10 Carbide Tipped Glass / Ceramic Drill Bits . F19 NEW! Monolock® Carbide Tipped . F19 NEW! SDS Drill Stop . F10 Glass / Ceramic Drill Bits Rotary Rebar Cutters . F11 Fluted Rubbing Brick . F19 F Tapcon® Drills HALF FLAT SHANK BITS SDS-PLUS / HEX DRIVE BITS ANSI ANSI For concrete screw installation For concrete screw installation, Made in to use with SDS-Plus drive machines.
    [Show full text]
  • Air Tools and Air Tool Safety
    Air Tools and Air Tool Safety Chapter5 Compressed Air & Gas Handbook n Seventh Edition February 2018 Air Tools and Air Tool Safety Chapter AIR TOOLS AND AIR TOOL SAFETY 5 Air tools are designed to provide increased productivity, long service life, and safe operation. But, as with any type of tool or machine, these advantages can be realized only through proper application, proper maintenance, and user training. Application Air tools should be selected by a person who is familiar with air tools and their proper application. Air tool selection must take into account the particular factors in a given job that will affect air tool and operator performance. Some factors to be considered are the workstation design, the operator-tool-task relationship, and the environment in which the user will perform the task. The workstation should be carefully designed so that the workpiece is held securely, so that there is sufficient light and ventilation, and so that means are provided for safely holding or suspending the tool. The workstation should also be arranged for operator convenience and comfort. Maintenance Air tools must undergo periodic inspection and routine maintenance to ensure that they are operating properly. Tool maintenance and repairs should be performed by authorized, trained, and competent personnel. Premature failure and poor performance of air tools can often be attributed to the following: 1. water or foreign materials such as rust or pipe scale in the air supply lines 2. inadequate or improper lubrication 3. worn parts 4. incorrect air pressure and air flow Training Air tools should be operated only by qualified personnel who have been trained in their proper operation and safe use.
    [Show full text]
  • “Out Perform - out Last” Impact Drivers / Wrenches
    Drill/Drivers DS14DVF3 DS14DMR(HS) 14.4v 10mm Cordless Driver Drill 14.4v 10mm Cordless Driver Drill - 10mm keyless chuck - Powerful 50Nm of Torque - 22-stage adjustable clutch for - 13mm Keyless chuck precise torque settings - 22-stage torque adjustment - Maximum torque of 34Nm - Comfortable non-slip grip handle - Soft grip, slip resistant handle - New Super Ni-MH battery - Comes with torch, bit set and 2 x 1.4Ah batteries DS18DVF3 18v 13mm Cordless Driver Drill - 13mm keyless chuck NEW SUPER - 22-stage adjustable clutch for NEW SUPER precise torque setting - Maximum torque of 45Nm NI-MH BATTERY - Soft grip, slip resistant handle - Comes with torch, bit set and MORE POWER. 2 x 1.4Ah batteries MORE LIFE. DS18DVB2 DS18DMR(HS) 18v 13mm Cordless Driver Drill 13mm Cordless Driver Drill - Two speed, variable speed reverse - 2-speed, variable speed reverse - Electronic feedback power control - 13mm keyless chuck - 22-stage torque adjustment - 22-stage torque adjustment - 13mm keyless chuck - Automatic spindle lock & single - High 45Nm torque sleeve chuck for quick bit setting - Electric brake - Powerful fan cooled motor - Soft grip handle & belt hook - High Power 65Nm torque - 2 x 2.0Ah batteries - New Super Ni-MH batteries (available in 2 & 3 battery option) Impact Hammer Drill/Drivers DV14DMR(HS) DV18DMR(HS) 14.4v Cordless Impact Driver Drill 18v Cordless Impact Driver Drill - 22 position torque adjustable clutch - 22 position torque adjustable clutch - Powerful 52Nm of Torque - Powerful 62Nm of Torque - 3 mode selection: Drill, impact drill,driv-
    [Show full text]
  • WET DIAMOND CORE BITS COMBINATION CORE DRILL RIG "Combo" Rig Cat
    ELECTRIC & CORDLESS TOOLS HI-LINE UTILITY SUPPLY CO. Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 19 BREAKER HAMMER Cat. No. 11304 This portable electric breaker is commonly used to drive ground rods. Its shock mounted handles absorb vibration while 1,340 BPM are delivered. 1-1/8" hex drive; 15 amp; Wgt: 66.5 lbs. Electric & Cordless Bit not included. Tools HAMMER HAULER Cat. No. T1657 WET DIAMOND CORE BITS COMBINATION CORE DRILL RIG "Combo" Rig Cat. No. M-1C This complete combination core drill rig accommodates 1"- 10" core bits and includes: - COMBINATION ANCHOR/VACUUM BASE - MAST Size Premium Heavy Duty - CARRIAGE MC-1C 1-1/2" POL-1.5 HOL-1.5 - CONTROL PANEL - VACUUM PUMP 1-5/8" POL-1.625 HOL- - CEILING JACK 1-3/4" POL-1.75 HOL-1.75 - MOTOR MOUNT PLATE 1-7/8" POL-1.875 HOL- - CHOICE OF DRILL MOTOR 2" POL-2 HOL-2 2-1/4" POL-2.25 HOL-2.25 “Anchor” Rig 2-1/2" POL-2.5 HOL-2.5 Cat. No. M-1A 2-3/4" POL-2.75 HOL-2.75 Same as above 3" POL-3 HOL-3 but has a smaller 3-1/4" POL-3.25 HOL-3.25 base and does not include a vacuum 3-1/2" POL-3.5 HOL-3.5 pump. 4" POL-4 HOL-4 4-1/4" POL-4.25 HOL-4.25 4-1/2" POL-4.5 HOL-4.5 COMBO ANCHOR MOTOR RPM 5" POL-5 HOL-5 RIG RIG 20 Amp Core Bore 350/900 5055 5001 5-1/2" POL-5.5 HOL-5.5 20 Amp Milwaukee 300/600 5048 5009 6" POL-6 HOL-6 20 Amp Milwaukee 450/900 5059 5003 20 Amp Milwaukee 600/1200 5049 5010 15 Amp Milwaukee 500/1000 5051 5006 Many other types and sizes available 15 Amp Milwaukee 375/750 5052 5007 to fit your exact application.
    [Show full text]
  • Summer Tool Sale Monday, August 17Th – 30Th
    SUMMER TOOL SALE MONDAY, AUGUST 17TH – 30TH SAVE $10 - $150 OFF SAVE $108 WITH THE PURCHASE OF BOTH THE BRUSHLESS TOOL KIT AND 40-PC. BIT SET. PLUS RECEIVE A FREE 2-PACK OF 18V 3.0AH BATTERIES WHEN ITEMS ARE PURCHASED TOGETHER. A $149 VALUE! SAVINGS ONLY VALID WITH PURCHASE OF 40-PIECE SHOCKWAVE BIT SET (053408607). RECEIVE FREE BATTERIES WITH PURCHASE OF KIT AND BIT SET. FREE + = SAVE SALE $ WHEN PURCHASED WITH $ 99 $ 100 40-PC SHOCKWAVE BIT SET 19 SAVE $8 149 18V 2-TOOL FUEL RED LITHIUM-ION BRUSHLESS COMBO KIT 40-PIECE SHOCKWAVE BIT SET M18 RED LITHIUM HIGH OUTPUT Kit includes: 1/2” hammer drill driver, 1/4” dex impact driver, 053408607 CP 3.0AH BATTERY 2 PACK (1) battery, charger & contractor bag REG. $27.99 2000003849 053309155 REG. $149 REG. $399 SAVE $108 WITH THE PURCHASE OF BOTH YOUR CHOICE OF TOOL KITS AND 40-PC. BIT SET. PLUS RECEIVE A FREE 18V 5 AMP BATTERY WHEN ITEMS ARE PURCHASED TOGETHER. A $129 VALUE! SAVINGS ONLY VALID WITH PURCHASE OF 40-PIECE SHOCKWAVE BIT SET (053408607). RECEIVE FREE BATTERY WITH PURCHASE OF KIT AND BIT SET. SAVE $ WHEN PURCHASED WITH 100 40-PC SHOCKWAVE BIT SET SALE 18V DRILL DRIVER KIT $ 99 Kit includes: 1/2" drill/driver, 19 $ (2) batteries, charger & carrying case SAVE 8 053308133 40-PIECE SHOCKWAVE BIT SET REG. $279 053408607 REG. $27.99 SAVE $ WHEN PURCHASED WITH + 100 40-PC SHOCKWAVE BIT SET 18V HAMMER DRILL KIT Kit includes: hammer drill/driver, (2) batteries, charger & carrying case 053309172 REG.
    [Show full text]