READY VAULT Instructions #1050224 Product #222933 Revision A

1 IMPORTANT SAFETY INFORMATION • This vault is designed to increase safety of unloaded firearm(s). Completely unload the firearm(s) before using this device. • Treat every firearm as if it were loaded. • Always keep the muzzle pointed in a safe direction when handling any firearm. • Read the owner’s manual and instructions supplied with your firearm before attempting to operate the firearm and use this vault. • Always store unloaded and locked firearms in a safe place inaccessible to children and other unauthorized persons. Store ammunition in a separate locked or secure location. • Do not store the combination to the vault in the same place as your vault. • This vault is only part of an effective firearm safety and storage solution, and should not be a substitute for safe firearm handling or secure storage. • This vault is designed to be a convenient locking mechanism, but tools, determination, and time can overcome any vault. • Always engage the safety and never touch the trigger when placing or removing the firearm from the vault. • Always fasten the vault to a secure object. See mounting instructions.

IMPORTANT

• This vault features a programmable lock mechanism. Upon removing this product from the packaging for the first time, be sure to program the lock to a unique combination (See programming lock instructions for more details). • You should document your programmed combination and store this documented combination in a secure location, so that the combination can be retrieved if forgotten. Combination should be stored in a secure location, inaccessible to children and unauthorized individuals. • If you lose your combination, there are no alternative methods for gaining entry, rendering the vault unusable. Your vault will have to be destroyed to access contents. • Perchlorate Notice – This product may contain a CR coin cell lithium battery. The State of California requires the following disclosure statement: “Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate”

2 CONTENT B E A

F C

D QTY ITEM A 1 SUPERMAX VAULT B 4 LONG WOOD SCREWS C 4 SHORT WOOD SCREWS D 4 NUTS E 8 FENDER WASHERS F 4 BOLTS LOCKING AND UNLOCKING

TO UNLOCK

• Rotate knob to the CLEAR position (Counter-clockwise) to clear out any combinations that may have previously been entered.

• Enter the correct combination (The default code is: 1, 2, 3, 4, 5) • Rotate knob to the UNLOCKED position (Clockwise)

3 TO LOCK VAULT

• Fully close vault door. • Rotate knob to the LOCKED position. (Counter-clockwise)

• Check to make sure that vault is locked securely. • Pull on door to ensure vault is locked. • Attempt to rotate the knob to the UNLOCKED position. (Clockwise)

PROGRAMMING LOCK

• The default code is: 1, 2, 3, 4, 5 • This vault features a programmable lock mechanism. Upon removing this product from the packaging for the first time, the vault should be programmed to a unique combination. You should document your programmed combination and store this documented combination in a secure location, so that the combination can be retrieved if forgotten.

TO PROGRAM LOCK:

1. Open the vault, remove the foam cover on the back of the lock mechanism, and locate the program button.

L-Bracket and Program Button

4 2. While the vault is open, turn the knob to the LOCKED position. (Counter-clockwise)

3. Enter the existing code. (The default code is: 1, 2, 3, 4, 5) 4. Push the L-Bracket towards the lock mechanism, which depresses the Program Button. 5. Turn the knob to the CLEAR position (Counter-clockwise) and then release the knob allowing it to return to the LOCKED position.

6. Carefully enter the new desired combination, ensuring that the buttons are firmly pressed. • Combinations can be a single button, all 5 buttons, or any number of buttons in any order. Two or more buttons can be pushed simultaneously to create a unique combination (1&2 pushed simultaneously is a different combination then pushing 1 then 2, or 2 then 1). Each of the 5 buttons can only be pushed once in a lock combination. 7. To save the new combination, turn the knob to the UNLOCKED position. (Clockwise) 8. Before locking the vault closed, lock the locking mechanism and test your code with door open.

Note: You should document your programmed combination and store this documented combination in a secure location, so that the combination can be retrieved if forgotten. The Combination should be stored in a secure location, inaccessible to children and unauthorized individuals.

For more information on programming the lock, see our website for a demonstrational video. http://www.btibrands.com 5 MOUNTING

Always fasten the vault to a secure object before use. • The vault can be mounted by either side, or by the back of the vault.

TO FASTEN VAULT:

1. Find a location where it will be convenient to mount and store the vault. Be sure to leave adequate room for the vault door to drop open. Vault door space

2. If mounting the vault on the left or right side, remove both of the side plates by removing the thumb nuts inside of the vault.

Remove the 4 thumb nuts inside of the vault to remove each side plate. 6 3. Hold the vault in the desired mounted location and use a pencil to mark the 4 mounting holes on the mounting surface.

4. Move the vault, and pre-drill the 4 marked holes for the mounting screws. • For hard woods, use a 5/32” drill bit. • For soft woods, use a 9/64” drill bit. 5. Place vault over pre-drilled holes, and fasten vault using 4 fasteners and fender washers. • For mounting into most types of furniture, the shorter wood screws will be the easiest fastener to use.

• For mounting through a wall into a stud, the longer wood screws should be used to fully engage the stud.

• There are also 4 bolts and nuts included, for mounting scenarios where a through hole can be drilled and there is access on both sides of the mounting surface to tighten the nuts.

6. If vault is mounted on the left or right side, reinstall the side plate, that is on the opposite side from the mounting surface. Reinstall the 4 thumb nuts inside of the vault to secure plate.

7 INTERNAL LIGHT This vault includes an internal light kit that automatically activates when the vault is opened. • The Battery compartment holds 2 CR2032 batteries (Batteries included). The Battery compartment is attached to the top of the vault using hook and loop. Battery compartment can easily be peeled off of the hook and loop. • Upon first use of the vault, remove the plastic tab in the Battery compartment, to allow the batteries to contact the battery terminals

Automatic Battery Light Compartment

Hook and ON - OFF Loop Switch

• The Battery compartment features an on/off switch to allow the user to turn off the automatic light, if desired.

Battery ON - OFF Compartment Switch

8