Balancier Limited Edition (For White Gold Version)

Total Page：16

File Type：pdf, Size：1020Kb

Balancier Limited edition (for white gold version) 33 pieces in white gold Hand-wound movement Four handed display • hours and minutes • small seconds • power-reserve • GREUBEL FORSEY balance wheel system • stop balance Movement Exterior Movement dimensions Case • Diameter : 36.40 mm • In white gold with asymmetrical convex • Thickness : 8.35 mm synthetic sapphire crystal • Transparent back with synthetic sapphire crystal Number of parts • Lateral window with shaped synthetic • Movement: 269 parts sapphire crystal • Three-dimensional, variable geometry-shaped lugs Number of jewels • Raised polished engraving “Balancier” and • 37 “Greubel Forsey” on a hand-punched background • Olived-domed jewels in gold chatons • Gold security screws • Hand-polished bezel, caseband with Chronometric power reserve hand-finished straight graining • 72 hours • Hand-engraved individual number Barrels Case dimensions • Two series-coupled fast rotating barrels • Diameter : 43.50 mm (1 turn in 3.2 hours), one of which is equipped • Height : 13.94 mm with a slipping spring to avoid excess tension Water resistance of the case Balance wheel • Water-resistant 3 atm - 30 m - 100 ft (standard • In-house variable-inertia with 6 gold mean-time NIHS 92-20/SN ISO 22810:2010) screws (12.60 mm diameter) • Stop balance activated by crown Crown • In white gold with engraved Frequency and black lacquered GF logo • 21’600 vibrations/hour Dial side Balance spring • Hour-ring in gold, hand matt lapped, engraved and • Phillips terminal curve black lacquered hour indexes, minute-circle and • Geneva-style stud « Greubel Forsey » • Small second and power-reserve indicators in Main plate gold, engraved and black lacquered, hand matt • Nickel silver, frosted and spotted, straight-grained lapped flanks, nickel-palladium treatment Movement side Bridges • Flat black polished gold plate with raised • Nickel silver, frosted and spotted with polished engraved text, polished bevelling and bevelling and countersinks, straight-grained countersinks, straight-grained flanks with flanks, nickel-palladium treatment apparent gold chatons • Flat black polished and barrel-polished steel • Flat black polished gold central plate, "GF" balance wheel bridge, hand-polished bevelling engraved with individual number, polished and countersinks, straight-grained flanks bevelling and countersinks, straight-grained flanks Gearing • Involute circle profile Hands • Hours and minutes, small seconds and Displays power-reserve in polished blued steel, • Hours and minutes hand-polished countersinks • Small seconds • 72-hours power reserve on a sector Strap and clasp • Hand-sewn alligator • White gold pin buckle, hand-engraved with the GF logo.

Copy Link

Recommended publications

Floating and Platform Balances an Introduction
Floating and Platform Balances An introduction ©Darrah Artzner 3/2018 Floating and Platform Balances • Introduce main types • Discuss each in some detail including part identification and function • Testing and Inspecting • Cleaning tips • Lubrication • Performing repairs Balance Assembly Type Floating Platform Floating Balance Frame Spring stud Helicoid spring Hollow Tube Mounting Post Regulator Balance wheel Floating Balance cont. Jewel Roller Pin Paired weight Hollow Tube Safety Roller Pivot Wire Floating Balance cont. Example Retaining Hermle screws Safety Roller Note: moving fork Jewel cover Floating Balance cont. Inspecting and Testing (Balance assembly is removed from movement) • Inspect pivot (suspension) wire for distortion, corrosion, breakage. • Balance should appear to float between frame. Top and bottom distance. • Balance spring should be proportional and not distorted in any way. • Inspect jewels for cracks and or breakage. • Roller pin should be centered when viewed from front. (beat) • Rotate balance wheel three quarters of a turn (270°) and release. It should rotate smoothly with no distortion and should oscillate for several (3) minutes. Otherwise it needs attention. Floating Balance cont. Cleaning • Make sure the main spring has been let down before working on movement. • Use non-aqueous watch cleaner and/or rinse. • Agitate in cleaner/rinse by hand or briefly in ultrasonic. • Rinse twice and final in naphtha, Coleman fuel (or similar) or alcohol. • Allow to dry. (heat can be used with caution – ask me how I would do it.) Lubrication • There are two opinions. To lube or not to lube. • Place a vary small amount of watch oil on to the upper and lower jewel where the pivot wire passed through the jewel holes.
[Show full text]
Pioneers in Optics: Christiaan Huygens
Downloaded from Microscopy Pioneers https://www.cambridge.org/core Pioneers in Optics: Christiaan Huygens Eric Clark From the website Molecular Expressions created by the late Michael Davidson and now maintained by Eric Clark, National Magnetic Field Laboratory, Florida State University, Tallahassee, FL 32306 . IP address: [email protected] 170.106.33.22 Christiaan Huygens reliability and accuracy. The first watch using this principle (1629–1695) was finished in 1675, whereupon it was promptly presented , on Christiaan Huygens was a to his sponsor, King Louis XIV. 29 Sep 2021 at 16:11:10 brilliant Dutch mathematician, In 1681, Huygens returned to Holland where he began physicist, and astronomer who lived to construct optical lenses with extremely large focal lengths, during the seventeenth century, a which were eventually presented to the Royal Society of period sometimes referred to as the London, where they remain today. Continuing along this line Scientific Revolution. Huygens, a of work, Huygens perfected his skills in lens grinding and highly gifted theoretical and experi- subsequently invented the achromatic eyepiece that bears his , subject to the Cambridge Core terms of use, available at mental scientist, is best known name and is still in widespread use today. for his work on the theories of Huygens left Holland in 1689, and ventured to London centrifugal force, the wave theory of where he became acquainted with Sir Isaac Newton and began light, and the pendulum clock. to study Newton’s theories on classical physics. Although it At an early age, Huygens began seems Huygens was duly impressed with Newton’s work, he work in advanced mathematics was still very skeptical about any theory that did not explain by attempting to disprove several theories established by gravitation by mechanical means.
[Show full text]
Computer-Aided Design and Kinematic Simulation of Huygens's
applied sciences Article Computer-Aided Design and Kinematic Simulation of Huygens’s Pendulum Clock Gloria Del Río-Cidoncha 1, José Ignacio Rojas-Sola 2,* and Francisco Javier González-Cabanes 3 1 Department of Engineering Graphics, University of Seville, 41092 Seville, Spain; [email protected] 2 Department of Engineering Graphics, Design, and Projects, University of Jaen, 23071 Jaen, Spain 3 University of Seville, 41092 Seville, Spain; [email protected] * Correspondence: [email protected]; Tel.: +34-953-212452 Received: 25 November 2019; Accepted: 9 January 2020; Published: 10 January 2020 Abstract: This article presents both the three-dimensional modelling of the isochronous pendulum clock and the simulation of its movement, as designed by the Dutch physicist, mathematician, and astronomer Christiaan Huygens, and published in 1673. This invention was chosen for this research not only due to the major technological advance that it represented as the first reliable meter of time, but also for its historical interest, since this timepiece embodied the theory of pendular movement enunciated by Huygens, which remains in force today. This 3D modelling is based on the information provided in the only plan of assembly found as an illustration in the book Horologium Oscillatorium, whereby each of its pieces has been sized and modelled, its final assembly has been carried out, and its operation has been correctly verified by means of CATIA V5 software. Likewise, the kinematic simulation of the pendulum has been carried out, following the approximation of the string by a simple chain of seven links as a composite pendulum. The results have demonstrated the exactitude of the clock.
[Show full text]
A Royal 'Haagseklok'
THE SPLIT (Going and Strike) BARREL (top) p.16 Overview Pendulum Applications. The Going-wheel The Strike-wheel Ratchet-work Stop-work German Origins Hidden Stop Work English Variants WIND-ME MECHANISM? p.19 An "Up-Down" Indicator (Hypothetical Project) OOSTERWIJCK'S UNIQUE BOX CASE p.20 Overview Show Wood Carcass Construction Damage Control Mortised Hinges A Royal 'Haagse Klok' Reviewed by Keith Piggott FIRST ASSESSMENTS p.22 APPENDIX ONE - Technical, Dimensions, Tables with Comparable Coster Trains - (Dr Plomp's 'Chronology' D3 and D8) 25/7/1 0 Contents (Horological Foundation) APPENDIX TWO - Conservation of Unique Case General Conservation Issues - Oosterwijck‟s Kingwood and Ebony Box INTRODUCTION First Impressions. APPENDIX SIX - RH Provenance, Sir John Shaw Bt. Genealogy HUYGENS AUTHORITIES p.1 Collections and Exhibitions Didactic Scholarship PART II. „OSCILLATORIUM‟ p.24 Who was Severijn Oosterwijck? Perspectives, Hypotheses, Open Research GENERAL OBSERVATIONS p.2 The Inspection Author's Foreword - Catalyst and Conundrums Originality 1. Coster‟s Other Contracts? p.24 Unique Features 2. Coster‟s Clockmakers? p.24 Plomp‟s Characteristic Properties 3. Fromanteel Connections? p.25 Comparables 4. „Secreet‟ Constructions? p.25 Unknown Originator : German Antecedents : Application to Galilei's Pendulum : Foreknowledge of Burgi : The Secret Outed? : Derivatives : Whose Secret? PART I. „HOROLOGIUM‟ p.3 5. Personal Associations? p.29 6. The Seconds‟ Hiatus? p.29 The Clock Treffler's Copy : Later Seconds‟ Clocks : Oosterwijck‟s Options. 7. Claims to Priority? p.33 THE VELVET DIALPLATE p.3 8. Valuation? p.34 Overview Signature Plate APPENDIX THREE - Open Research Projects, Significant Makers Chapter Ring User-Access Data Comparable Pendulum Trains, Dimensions.
[Show full text]
Technical Data Sheet RM
TECHNICAL SPECIFICATIONS OF THE TOURBILLON RICHARD MILLE RM 053 PABLO MAC DONOUGH Limited edition of 15 pieces. CALIBER RM053: manual winding tourbillion movement tilted 30° with hours, minutes and seconds. Dimensions: 50 mm x 42.70 mm x 20.00 mm. MAIN FEATURES POWER RESERVE Circa 48 hours. BASEPLATE AND BRIDGES IN GRADE 5 TITANIUM The manufacturing of these components in grade 5 titanium gives the whole assembly a high degree of rigidity and achieves excellent surface flatness which is essential for ensuring that the gear train functions perfectly. The skeletonized baseplate and the bridges have been subjected to intensive and complete validation tests to optimize their resistance capacities. It is tilted 30° providing optimal conditions for users to check the time on their wrist. Both compact and lightweight, the RM053 movement is ultra-resistant to the centrifugal and centripetal forces generated during a match. FREE SPRUNG BALANCE WHEEL WITH VARIABLE INERTIA The free-sprung balance provides better reliability in the event of shocks, movement assembly and disassembly. It also guarantees better chronometric results over an extended period of time. There is no need for an index plate, allowing more precise and frequent adjustment using 4 setting screws. FAST ROTATING BARREL (6 hours per revolution instead of 7.5 hours) This type of barrel provides the following advantages: - The phenomenon of periodic internal mainspring adhesion is significantly diminished, thereby increasing performance, - Provision of an excellent mainspring delta curve with an ideal power reserve/performance/regularity ratio. BARREL PAWL WITH PROGRESSIVE RECOIL This device permits a profitable winding gain (circa 20 %), especially during the winding start.
[Show full text]
Readingsample
History of Mechanism and Machine Science 21 The Mechanics of Mechanical Watches and Clocks Bearbeitet von Ruxu Du, Longhan Xie 1. Auflage 2012. Buch. xi, 179 S. Hardcover ISBN 978 3 642 29307 8 Format (B x L): 15,5 x 23,5 cm Gewicht: 456 g Weitere Fachgebiete > Technik > Technologien diverser Werkstoffe > Fertigungsverfahren der Präzisionsgeräte, Uhren Zu Inhaltsverzeichnis schnell und portofrei erhältlich bei Die Online-Fachbuchhandlung beck-shop.de ist spezialisiert auf Fachbücher, insbesondere Recht, Steuern und Wirtschaft. Im Sortiment finden Sie alle Medien (Bücher, Zeitschriften, CDs, eBooks, etc.) aller Verlage. Ergänzt wird das Programm durch Services wie Neuerscheinungsdienst oder Zusammenstellungen von Büchern zu Sonderpreisen. Der Shop führt mehr als 8 Millionen Produkte. Chapter 2 A Brief Review of the Mechanics of Watch and Clock According to literature, the ﬁrst mechanical clock appeared in the middle of the fourteenth century. For more than 600 years, it had been worked on by many people, including Galileo, Hooke and Huygens. Needless to say, there have been many ingenious inventions that transcend time. Even with the dominance of the quartz watch today, the mechanical watch and clock still fascinates millions of people around the, world and its production continues to grow. It is estimated that the world annual production of the mechanical watch and clock is at least 10 billion USD per year and growing. Therefore, studying the mechanical watch and clock is not only of scientiﬁc value but also has an economic incentive. Never- theless, this book is not about the design and manufacturing of the mechanical watch and clock. Instead, it concerns only the mechanics of the mechanical watch and clock.
[Show full text]
Huygens and the Advancement of Time Measurements
Huygens and the Advancement of Time Measurements Kees Grimbergen1,2 1 Medical Physics, Academic Medical Centre, University of Amsterdam 2 Museum van het Nederlandse Uurwerk (MNU), Museum of the Dutch Clock, Zaandam, The Netherlands Academic Medical Center Titan: From Discovery to Encounter, Noordwijk 16 April, 2004 MNU Zaans Uurwerkenmuseum 1976 2001 Museum van het Nederlandse Uurwerk Museum van het Nederlandse Uurwerk • Collection of Dutch Clocks; Period 1500 - 1850 * Hague clocks * Longcase clocks * Wall clocks * Table clocks * Regional clocks (Zaan region, Brabant, Friesland) * Precision clocks Salomon Coster with ‘privilege’ Christiaan Huygens; Collection Museum van het Nederlandse Uurwerk, ca 1658 Christiaan Huygens 14 april 1629 - 8 juli 1695 P. Bourguignon ca 1688; coll KNAW Museum of the Dutch Clock Medical Physics Laboratory Henk van der Tweel 1915 - 1997 Mechanical Clocks (> 1300) 1200 . 1300 . 1400 . 1500 . 1600 . 1700 . 1800 . 1900 . 2000 . 2100 Foliot/Balance Wheel Pendulum/Balance spring Huygens 1656, 1675 Early Turret Clocks Maastricht 1400?; Winkel (N-H) ~1460 Early Mechanical Clocks Nürnberg ca 1450 Nederland ca 1520 (MNU) Museum of the Dutch Clock Exhibition Willem Barents and his Clock; 1596-1996 • Model from ca 1450 • Not touched since 1596 • Collection Rijksmuseum Mechanical Clocks; 1300 - 1656 Foliot/Vertical Verge-Escapement M = I ¶w/¶t = I ¶2f/¶t2 M I w M j Mechanical Clocks; 1300 - 1656 Foliot/Vertical Verge-Escapement T = 2 Ö2 fmax(I/M) M T I w M j Mechanical Clocks; 1300 - 1656 Foliot/Vertical Verge-Escapement
[Show full text]
TECHNICAL GUIDE Cal
TECHNICAL GUIDE Cal. 6R24A REMARKS ON DISASSEMBLING and reassembling the moVement l HOW TO REMOVE THE SETTING STEM beFore dismantling the moVement Crown position: 0 position Push the SETTING LEVER gently (refer to the picture on the right) in order to disengage it from the SETTING STEM. Then pull out the crown with stem completely. Push here l SETTING MECHANISM 64 YOKE 65 SETTING LEVER 63 Setting lever JUmper 68 CAlenDAR COrrectOR 1st intermeDIAte WHeel 69 WinDing piniON 70 clUtcH WHeel 13/30 TECHNICAL GUIDE Cal. 6R24A l Balance and escaPement How to disassemble/reassemble the BALANCE and BALANCE COCK • Disassembling 1) Rotate the STUD SUPPORT until it touches to the BALANCE COCK. When doing so, make sure that the second bend of the balance-spring does not touch the REGULATOR PIN. 2) Push out the stud parallel to the slit of the STUD SUPPORT (the direction also shown by the red arrow in the illustration) in order to remove it from the STUD SUPPORT. 3) Unscrew the BALANCE COCK SCREW and remove the BALANCE COCK WITH REGULATOR. 4) Remove the BALANCE COMPLETE WITH STUD. 14/30 TECHNICAL GUIDE Cal. 6R24A • Reassembling 1) Install the BALANCE COMPLETE WITH STUD to the MAIN PLATE. 2) Set the BALANCE COCK WITH REGURATOR and tighten the BALANCE COCK SCREW. 3) Temporarily set the stud to the STUD SUPPORT. Do not engage the balance-spring to the REGULATOR PIN. The balance-spring passes outside of the REGULATOR-PIN at this stage. 4) Push back the stud parallel to the slit of the STUD SUPPORT.
[Show full text]
The Art of Making Watch Mainsprings, Repeater Springs and Balance Springs
THE ART OF MAKING WATCH MAINSPRINGS, REPEATER SPRINGS AND BALANCE SPRINGS By Mr W. BLAKEY Hydraulic Engineer Etc. AMSTERDAM MARC-MICHEL REY 1780 © Copyright 2014 Richard Watkins, Tasmania, Australia www.watkinsr.id.au Translated from William Blakey L’Art de Faire les Ressorts de Montres, 1780, Amsterdam: Marc-Michel Rey: http://gallica.bnf.fr/ark:/12148/ bpt6k61161354 Contents Translator’s Notes ......................................................................................iv Biography of William Blakey ...............................iv Dating the Technology. v The Translation .........................................vi Bibliography ............................................vi Prospectus ...................................................................................................ix Extract From the Records of the Royal Academy of Sciences ..................xi Foreword ..................................................................................................xvii The Art of Making Watch Mainsprings. .................................................... 1 The Way to Make Repeater Springs ........................................................ 27 The Way to Make Balance Springs. ......................................................... 29 iii Translator’s Notes Biography of William Blakey William Blakey was the son of an English watchmaker of the same name. Blakey senior was born about 1688. He was apprenticed as a watchmaker in 1701 and died in 1748 aged 60. In 1718 he went to France where he was in charge of a steelworks
[Show full text]
Flexure Pivot Oscillator with Intrinsically Tuned Isochronism
Flexure Pivot Oscillator With bases. We derive analytical models for the isochronism and gravity sensitivity of the oscillator and validate them by finite Intrinsically Tuned Isochronism element simulation. We give an example of dimensioning this oscil- lator to reach typical practical watch specifications and show that 1 we can tune the isochronism defect with a resolution of 1 s/day E. Thalmann within an operating range of 10% of amplitude. We present a École Polytechnique Fédérale de Lausanne (EPFL), mock-up of the oscillator serving as a preliminary proof-of- Instant-Lab, concept. [DOI: 10.1115/1.4045388] Microcity, Rue de la Maladière 71b, Keywords: compliant mechanisms, design of innovative devices CH-2000 Neuchâtel, Switzerland design of machine elements, mechanical oscillators, isochronism e-mail: etienne.thalmann@epfl.ch Downloaded from https://asmedigitalcollection.asme.org/mechanicaldesign/article-pdf/142/7/075001/6463702/md_142_7_075001.pdf by EPFL Lausanne user on 16 December 2019 M. H. Kahrobaiyan 1 Introduction École Polytechnique Fédérale de Lausanne (EPFL), 1.1 Limitations of Traditional Mechanical Watches. The Instant-Lab, time base used in classical mechanical watches is a harmonic oscil- Microcity, Rue de la Maladière 71b, lator consisting of a spiral spring attached to a balance wheel having a rigid pivot rotating on jeweled bearings. It has essentially the same CH-2000 Neuchâtel, Switzerland architecture as when it was introduced by Huygens in 1675 [1], see e-mail: mohammad.kahrobaiyan@epfl.ch Fig. 1. Subsequently, significant improvements were achieved in chronometric accuracy but seemed to have reached a plateau. The I. Vardi general consensus in horology is that the quality factor of the oscil- École Polytechnique Fédérale de Lausanne (EPFL), lator, a dimensionless number that characterizes the damping of an Instant-Lab, oscillator, needs to be improved for the accuracy to increase [2–4].
[Show full text]
Simple Pendulum
The (Not So) Simple Pendulum ©2007-2008 Ron Doerfler Dead Reckonings: Lost Art in the Mathematical Sciences http://www.myreckonings.com/wordpress December 29, 2008 Pendulums are the defining feature of pendulum clocks, of course, but today they don’t elicit much thought. Most modern “pendulum” clocks simply drive the pendulum to provide a historical look, but a great deal of ingenuity originally went into their design in order to produce highly accurate clocks. This essay explores horologic design efforts that were so important at one time—not gearwork, winding mechanisms, crutches or escapements (which may appear as later essays), but the surprising inventiveness found in the “simple” pendulum itself. It is commonly known that Galileo (1564-1642) discovered that a swinging weight exhibits isochronism, purportedly by noticing that chandeliers in the Pisa cathedral had identical periods despite the amplitudes of their swings. The advantage here is that the driving force for the pendulum, which is difficult to regulate, could vary without affecting its period. Galileo was a medical student in Pisa at the time and began using it to check patients’ pulse rates. Galileo later established that the period of a pendulum varies as the square root of its length and is independent of the material of the pendulum bob (the mass at the end). One thing that surprised me when I encountered it is that the escapement preceded the pendulum—the verge escapement was used with hanging weights and possibly water clocks from at least the 14th century and probably much earlier. The pendulum provided a means of regulating such an escapement, and in fact Galileo invented the pin-wheel escapement to use in a pendulum clock he designed but never built.
[Show full text]
DISCOVERING HUYGENS C.D. Andriesse Institute for the History
DISCOVERING HUYGENS C.D. Andriesse Institute for the History and Foundations of Science, Universiteit Utrecht The delicacies of our conference dinner, ladies and gentlemen, may have brought you in the right mood to hear about the dinner that was served to Christiaan Huygens at the occasion of his sister’s marriage – served not only to this frail little man, of course, but to forty healthy stomachs of his family as well. What would you think of a swine’s head and a hundred partridges, capons, turkeys, pheasants and hares around, all stuffed with lamb’s meat and lardoon? When the aromas of the meat become too much for you, sniff then at one of those strongly perfumed candles. And when there is not enough Burgundy to rinse your throat, quell the pepper with the sugar and marzipan in that astonishing quantity of pastries. Since it’s a wedding party, you bang your plate with the cutlery when two youngsters, coyly hiding behind a napkin, alternately kiss and sip from each other’s glass of wine. Is it Christiaan’s turn to dive behind a napkin? He is fond of young women, and being just thirty-one … But wait a moment. Despite his merrymaking – Christiaan uses this word (réjouissances) when he writes a learned friend the other day – it is already clear to him that he is not a man to raise a family. And to others for that matter. They all sense it, the young women he pays attention to, sends letters and little presents, asks to sit for him and let him draw their portrait: beautiful Marianne Petit, or Haasje Hooft, and not to forget the affective Suzette Caron who will inherit half his capital – to mention only these.
[Show full text]