DOCSLIB.ORG

Partial Orders Strict Orders Equivalence Relations Sections 6.7-6.9 Prof

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Partial Orders Strict Orders Equivalence Relations Sections 6.7-6.9 Prof Partial Orders Strict Orders Equivalence Relations Sections 6.7-6.9 Prof. Sandy Irani Partial Orders A binary relation R on a set A is a partial order if R is: • Reflexive • Anti-Symmetric • Transitive Notation: x, y ∈ A, xRy ↔ x ≼ y Standard example: (ℤ, ≤) x is related to y if x ≤ y Reflexive? Anti-symmetric? Transitive? Partial Orders + Another example: (ℤ , ≼푝) + + n For x, y ∈ ℤ , x ≼푝 y if there is an n ∈ ℤ such that x = y Relfexive? Anti-Symmetric? Transitive? Incomparable Elements Another example: ({2, 4, 8, 64}, ≼푝) + + n For x, y ∈ ℤ , x ≼푝 y if there is an n ∈ ℤ such that x = y 4 4 ≼푝8? 2 64 8 ≼푝 4? 8 4 and 8 are incomparable Two elements, x and y, in a partial order are incomparable if x ⋠ y and y ⋠ x Incomparable Elements What about (ℤ, ≤)? Are any two elements incomparable? 4 ≤ 8? 8 ≤ 4? 4 ≤ 4? A partial order (A, ≼) is also a total order if for every x, y ∈ A, x ≼ y or y ≼ x. + (ℤ , ≼푝) is not a total order Partial Orders/Total Orders Relation R on the set {0,1}5 is defined as follows. For every x, y ∈ {0,1}5 x is related to y if y can be obtained by taking x and changing zero or more 0’s to 1’s. Examples: Partial Orders/Total Orders Relation R on the set {0,1}5 is defined as follows. For every x, y ∈ {0,1}5 x is related to y if y can be obtained by taking x and changing zero or more 0’s to 1’s. Reflexive? Anti-symmetric? Transitive? Total Order? Prefix A string x is a prefix of a string y if y can be obtained by adding zero or more characters to the end of x. Consider {a, b}* (the set of all strings over the alphabet {a, b}.) Examples: Partial Orders/Total Orders * Relation R on the set {a, b}* is defined as follows. For every x, y ∈ {a, b}* xRy if x is a prefix of y Select the correct description of R. A) Partial Order C) Total Order and a Total Order but not a Partial Order B) Partial Order D) Neither a Total Order but not a Total Order nor a Partial Order Partial Orders/Total Orders Relation R on the set {a, b}* is defined as follows. For every x, y ∈ {a, b}* xRy if x is a prefix of y Reflexive? Anti-symmetric? Transitive? Total Order? Partial Orders/Total Orders * Relation R on the set of players on a football team. For every two players, x and y on the team, xRy if y weighs at least as much as x (Big team, so can assume that here are all possible height/weight combinations) Select the correct description of R. A) Partial Order C) Total Order and a Total Order but not a Partial Order B) Partial Order D) Neither a Total Order but not a Total Order nor a Partial Order Partial Orders/Total Orders Relation R on the set of players on a football team. For every two players, x and y on the team, xRy if y weighs at least as much as x Reflexive? Anti-symmetric? Transitive? Total Order? Partial Orders/Total Orders Relation R on the set of players on a football team. For every two players, x and y on the team, xRy if y weighs at least as much as x (No two players on the team have the same weight) Reflexive? Anti-symmetric? Transitive? Total Order? Hasse Diagrams Hasse Diagrams are a clean way to depict a partial order. If x ≼ y, then x appears below y. (Converse not necessarily true) A line between x and y if x ≼ y and there is no z such that x ≼ z and z ≼ y Hasse Diagrams If x ≼ y, then x appears ( {2, 4, 8, 16, 32, 64}, ≼푝) below y. (Converse not necessarily true) A line between x and y if x ≼ y and there is no z such that x ≼ z and z ≼ y Maximal/Minimal Elements in a Partial Order x is a maximal element ( {2, 4, 8, 16, 32, 64}, ≼푝) if there is no y such that 64 x ≼ y 16 x is a minimal element 8 32 4 if there is no y such that y ≼ x 2 Maximal elements: Minimal elements: Hasse Diagrams * g e Which pair of elements are not comparable? a c A) b and e b B) f and e d f C) b and c D) b and g Hasse Diagrams The Hasse diagram for a total order is just a chain: ( {1, 2, 3, 4, 5}, ≤ ) 5 4 3 2 1 Strict Orders A binary relation R on a set A is a strict order if R is: • Anti-Reflexive • Anti-Symmetric • Transitive Notation: x, y ∈ A, xRy ↔ x ≼ y Standard example: (ℤ, <) x is related to y if x < y Anti-Reflexive? Anti-symmetric? Transitive? Strict vs. Partial Orders Partial Order Strict Order 4 4 2 64 2 64 8 8 For x, y ∈ ℤ, x ≼푝 y For x, y ∈ ℤ, x ≼푝 y if there is an n, if there is an n, n ∈ ℤ+ n ∈ ℤ+, n > 1 and xn = y and xn = y Strict Orders A binary relation R on a set A is a strict order if R is: • Anti-Reflexive • Transitive If a relation R is anti-reflexive and transitive, then R is also anti-symmetric. [ (Anti-Reflexive) ᴧ (Transitive) ] → (Anti-Symmetric) Contrapositive: [¬(Anti-Symmetric) ᴧ (Transitive) ] → ¬(Anti-Reflexive) [¬(Anti-Symmetric) ᴧ (Transitive) ] → ¬(Anti-Reflexive) Proof: Anti-symmetric means you never have this pattern: ¬(Anti-Symmetric) means that you do have this pattern Somewhere: If the relation is transitive, then you also have: Which means that the relation is not Anti-Reflexive. □ Strict Orders A binary relation R on a set A is a strict order if R is: • Anti-Reflexive • Transitive A strict order is also a total order if for every x, y if x ≠ y then xRy or yRx (i.e. every distinct pair of elements in the domain are comparable.) Partial Orders/Total Orders * Relation R on the set {0,1}8 is defined as follows. For every x, y ∈ {0,1}8 if y contains more 1’s than x. Select the correct description of R. A) Strict Order C) Total Order and a Total Order but not a Strict Order B) Strict Order D) Neither a Strict Order but not a Total Order nor a Partial Order Partial Orders/Total Orders Relation R on the set {0,1}8 is defined as follows. For every x, y ∈ {0,1}8 if y contains more 1’s than x. Anti-Reflexive? Anti-symmetric? Transitive? Total Order? Partial Orders/Total Orders Relation R on a group of people. For every x, y in the group, xRy if y is taller than x. Select the correct description of R. Anti-Reflexive? Anti-symmetric? Transitive? Total Order? Precedence Relationships Strict orders are useful for representing precedence relationships Vertices: set of tasks Relation: task x must be completed before task y begins. Prerequisite structure for some ICS/CS classes: ICS 31 ICS 32 ICS 33 ICS 51 CS 151 CS 152 ICS 6B ICS 6D Prerequisite are represented by a directed graph with no cycles which is not necessarily transitive. Directed Acyclic Graphs (DAGs) A directed graph is acyclic if it does not have any positive length cycles. <v> is a cycle of length 0. (no edges) <v,v> is a cycle of length 1. v DAGs and Precedence Constraints Graph representing prerequisite structure must be a DAG G. Course x must be taken before course y ↔ (x,y) is in the transitive closure of G. Theorem: G is a directed acyclic graph (DAG) if and only if G+ is a strict order. Topological Sort of a DAG A topological sort of a DAG G is an ordering of the vertices such that for every edge (u,v) in G, u comes before v in the ordering. ICS 31 ICS 32 ICS 33 ICS 51 CS 151 CS 152 ICS 6B ICS 6D Note: there can be more than one topological sorts for a graph. Topological Sorts * Which ordering is not a valid topological sort for the graph given below: d a f e b c A) f, d, a, c, b, e C) f, b, d, a, e, c B) f, c, d, b, a, e Topological Sorts To find a topological sort, keep removing vertices that are minimal (in-degree 0) d a f e b c Equivalence Relations A binary relation R is an equivalence relation if R is: • Reflexive • Symmetric • Transitive Notation: if xRy then x ~ y a d e c b f Equivalence Relation Example Domain: ℤ For x, y ∈ ℤ, x ~ y if x-z is an integer multiple of 5 (x - z = 5k for k ∈ ℤ) Here is the arrow diagram for the relation on a restricted, finite set: {-4, -1, 2, 6, 7, 8, 19, 21, 27} 27 19 -1 6 7 8 2 21 -4 Equivalence Relation Example Domain: ℤ For x, y ∈ ℤ, x ~ y if x-z is an integer multiple of 5 (x - z = 5k for k ∈ ℤ) Reflexive: Symmetric Transitive: Equivalence Relation Example Domain: group of people For x, y in the group, x ~ y if x and y have the same birthday Reflexive: Symmetric Transitive: Equivalence Relations * Domain is a group of people: Relation R: xRy if x and y have the same first name or same last name.
Load more

Recommended publications
  • Scott Spaces and the Dcpo Category
    SCOTT SPACES AND THE DCPO CATEGORY JORDAN BROWN Abstract. Directed-complete partial orders (dcpo’s) arise often in the study of λ-calculus. Here we investigate certain properties of dcpo’s and the Scott spaces they induce. We introduce a new construction which allows for the canonical extension of a partial order to a dcpo and give a proof that the dcpo introduced by Zhao, Xi, and Chen is well-filtered. Contents 1. Introduction 1 2. General Definitions and the Finite Case 2 3. Connectedness of Scott Spaces 5 4. The Categorical Structure of DCPO 6 5. Suprema and the Waybelow Relation 7 6. Hofmann-Mislove Theorem 9 7. Ordinal-Based DCPOs 11 8. Acknowledgments 13 References 13 1. Introduction Directed-complete partially ordered sets (dcpo’s) often arise in the study of λ-calculus. Namely, they are often used to construct models for λ theories. There are several versions of the λ-calculus, all of which attempt to describe the ‘computable’ functions. The first robust descriptions of λ-calculus appeared around the same time as the definition of Turing machines, and Turing’s paper introducing computing machines includes a proof that his computable functions are precisely the λ-definable ones [5] [8]. Though we do not address the λ-calculus directly here, an exposition of certain λ theories and the construction of Scott space models for them can be found in [1]. In these models, computable functions correspond to continuous functions with respect to the Scott topology. It is thus with an eye to the application of topological tools in the study of computability that we investigate the Scott topology.
    [Show full text]
  • Section 8.6 What Is a Partial Order?
    Announcements ICS 6B } Regrades for Quiz #3 and Homeworks #4 & Boolean Algebra & Logic 5 are due Today Lecture Notes for Summer Quarter, 2008 Michele Rousseau Set 8 – Ch. 8.6, 11.6 Lecture Set 8 - Chpts 8.6, 11.1 2 Today’s Lecture } Chapter 8 8.6, Chapter 11 11.1 ● Partial Orderings 8.6 Chapter 8: Section 8.6 ● Boolean Functions 11.1 Partial Orderings (Continued) Lecture Set 8 - Chpts 8.6, 11.1 3 What is a Partial Order? Some more defintions Let R be a relation on A. The R is a partial order iff R is: } If A,R is a poset and a,b are A, reflexive, antisymmetric, & transitive we say that: } A,R is called a partially ordered set or “poset” ● “a and b are comparable” if ab or ba } Notation: ◘ i.e. if a,bR and b,aR ● If A, R is a poset and a and b are 2 elements of A ● “a and b are incomparable” if neither ab nor ba such that a,bR, we write a b instead of aRb ◘ i.e if a,bR and b,aR } If two objects are always related in a poset it is called a total order, linear order or simple order. NOTE: it is not required that two things be related under a partial order. ● In this case A,R is called a chain. ● i.e if any two elements of A are comparable ● That’s the “partial” of it. ● So for all a,b A, it is true that a,bR or b,aR 5 Lecture Set 8 - Chpts 8.6, 11.1 6 1 Now onto more examples… More Examples Let Aa,b,c,d and let R be the relation Let A0,1,2,3 and on A represented by the diagraph Let R0,01,1, 2,0,2,2,2,33,3 The R is reflexive, but We draw the associated digraph: a b not antisymmetric a,c &c,a It is easy to check that R is 0 and not 1 c d transitive d,cc,a, but not d,a Refl.
    [Show full text]
  • [Math.NT] 1 Nov 2006
    ADJOINING IDENTITIES AND ZEROS TO SEMIGROUPS MELVYN B. NATHANSON Abstract. This note shows how iteration of the standard process of adjoining identities and zeros to semigroups gives rise naturally to the lexicographical ordering on the additive semigroups of n-tuples of nonnegative integers and n-tuples of integers. 1. Semigroups with identities and zeros A binary operation ∗ on a set S is associative if (a ∗ b) ∗ c = a ∗ (b ∗ c) for all a,b,c ∈ S. A semigroup is a nonempty set with an associative binary operation ∗. The semigroup is abelian if a ∗ b = b ∗ a for all a,b ∈ S. The trivial semigroup S0 consists of a single element s0 such that s0 ∗ s0 = s0. Theorems about abstract semigroups are, in a sense, theorems about the pure process of multiplication. An element u in a semigroup S is an identity if u ∗ a = a ∗ u = a for all a ∈ S. If u and u′ are identities in a semigroup, then u = u ∗ u′ = u′ and so a semigroup contains at most one identity. A semigroup with an identity is called a monoid. If S is a semigroup that is not a monoid, that is, if S does not contain an identity element, there is a simple process to adjoin an identity to S. Let u be an element not in S and let I(S,u)= S ∪{u}. We extend the binary operation ∗ from S to I(S,u) by defining u ∗ a = a ∗ u = a for all a ∈ S, and u ∗ u = u. Then I(S,u) is a monoid with identity u.
    [Show full text]
  • Arxiv:1811.03543V1 [Math.LO]
    PREDICATIVE WELL-ORDERING NIK WEAVER Abstract. Confusion over the predicativist conception of well-ordering per- vades the literature and is responsible for widespread fundamental miscon- ceptions about the nature of predicative reasoning. This short note aims to explain the core fallacy, first noted in [9], and some of its consequences. 1. Predicativism Predicativism arose in the early 20th century as a response to the foundational crisis which resulted from the discovery of the classical paradoxes of naive set theory. It was initially developed in the writings of Poincar´e, Russell, and Weyl. Their central concern had to do with the avoidance of definitions they considered to be circular. Most importantly, they forbade any definition of a real number which involves quantification over all real numbers. This version of predicativism is sometimes called “predicativism given the nat- ural numbers” because there is no similar prohibition against defining a natural number by means of a condition which quantifies over all natural numbers. That is, one accepts N as being “already there” in some sense which is sufficient to void any danger of vicious circularity. In effect, predicativists of this type consider un- countable collections to be proper classes. On the other hand, they regard countable sets and constructions as unproblematic. 2. Second order arithmetic Second order arithmetic, in which one has distinct types of variables for natural numbers (a, b, ...) and for sets of natural numbers (A, B, ...), is thus a good setting for predicative reasoning — predicative given the natural numbers, but I will not keep repeating this. Here it becomes easier to frame the restriction mentioned above in terms of P(N), the power set of N, rather than in terms of R.
    [Show full text]
  • Learning Binary Relations and Total Orders
    Learning Binary Relations and Total Orders Sally A Goldman Ronald L Rivest Department of Computer Science MIT Lab oratory for Computer Science Washington University Cambridge MA St Louis MO rivesttheorylcsmitedu sgcswustledu Rob ert E Schapire ATT Bell Lab oratories Murray Hill NJ schapireresearchattcom Abstract We study the problem of learning a binary relation b etween two sets of ob jects or b etween a set and itself We represent a binary relation b etween a set of size n and a set of size m as an n m matrix of bits whose i j entry is if and only if the relation holds b etween the corresp onding elements of the twosetsWe present p olynomial prediction algorithms for learning binary relations in an extended online learning mo del where the examples are drawn by the learner by a helpful teacher by an adversary or according to a uniform probability distribution on the instance space In the rst part of this pap er we present results for the case that the matrix of the relation has at most k rowtyp es We present upp er and lower b ounds on the number of prediction mistakes any prediction algorithm makes when learning such a matrix under the extended online learning mo del Furthermore we describ e a technique that simplies the pro of of exp ected mistake b ounds against a randomly chosen query sequence In the second part of this pap er we consider the problem of learning a binary re lation that is a total order on a set We describ e a general technique using a fully p olynomial randomized approximation scheme fpras to implement a randomized
    [Show full text]
  • Order Relations and Functions
    Order Relations and Functions Problem Session Tonight 7:00PM – 7:50PM 380-380X Optional, but highly recommended! Recap from Last Time Relations ● A binary relation is a property that describes whether two objects are related in some way. ● Examples: ● Less-than: x < y ● Divisibility: x divides y evenly ● Friendship: x is a friend of y ● Tastiness: x is tastier than y ● Given binary relation R, we write aRb iff a is related to b by relation R. Order Relations “x is larger than y” “x is tastier than y” “x is faster than y” “x is a subset of y” “x divides y” “x is a part of y” Informally An order relation is a relation that ranks elements against one another. Do not use this definition in proofs! It's just an intuition! Properties of Order Relations x ≤ y Properties of Order Relations x ≤ y 1 ≤ 5 and 5 ≤ 8 Properties of Order Relations x ≤ y 1 ≤ 5 and 5 ≤ 8 1 ≤ 8 Properties of Order Relations x ≤ y 42 ≤ 99 and 99 ≤ 137 Properties of Order Relations x ≤ y 42 ≤ 99 and 99 ≤ 137 42 ≤ 137 Properties of Order Relations x ≤ y x ≤ y and y ≤ z Properties of Order Relations x ≤ y x ≤ y and y ≤ z x ≤ z Properties of Order Relations x ≤ y x ≤ y and y ≤ z x ≤ z Transitivity Properties of Order Relations x ≤ y Properties of Order Relations x ≤ y 1 ≤ 1 Properties of Order Relations x ≤ y 42 ≤ 42 Properties of Order Relations x ≤ y 137 ≤ 137 Properties of Order Relations x ≤ y x ≤ x Properties of Order Relations x ≤ y x ≤ x Reflexivity Properties of Order Relations x ≤ y Properties of Order Relations x ≤ y 19 ≤ 21 Properties of Order Relations x ≤ y 19 ≤ 21 21 ≤ 19? Properties of Order Relations x ≤ y 19 ≤ 21 21 ≤ 19? Properties of Order Relations x ≤ y 42 ≤ 137 Properties of Order Relations x ≤ y 42 ≤ 137 137 ≤ 42? Properties of Order Relations x ≤ y 42 ≤ 137 137 ≤ 42? Properties of Order Relations x ≤ y 137 ≤ 137 Properties of Order Relations x ≤ y 137 ≤ 137 137 ≤ 137? Properties of Order Relations x ≤ y 137 ≤ 137 137 ≤ 137 Antisymmetry A binary relation R over a set A is called antisymmetric iff For any x ∈ A and y ∈ A, If xRy and y ≠ x, then yRx.
    [Show full text]
  • Partial Orders CSE235 Partial Orders
    Partial Orders CSE235 Partial Orders Slides by Christopher M. Bourke Instructor: Berthe Y. Choueiry Spring 2006 Computer Science & Engineering 235 Introduction to Discrete Mathematics Sections 7.6 of Rosen 1 / 1 [email protected] Partial Orders I Motivating Introduction Partial Orders CSE235 Consider the recent renovation of Avery Hall. In this process several things had to be done. Remove Asbestos Replace Windows Paint Walls Refinish Floors Assign Offices Move in Office-Furniture. 2 / 1 Partial Orders II Motivating Introduction Partial Orders CSE235 Clearly, some things had to be done before others could even begin—Asbestos had to be removed before anything; painting had to be done before the floors to avoid ruining them, etc. On the other hand, several things could have been done concurrently—painting could be done while replacing the windows and assigning office could have been done at anytime. Such a scenario can be nicely modeled using partial orderings. 3 / 1 Partial Orderings I Definition Partial Orders CSE235 Definition A relation R on a set S is called a partial order if it is reflexive, antisymmetric and transitive. A set S together with a partial ordering R is called a partially ordered set or poset for short and is denoted (S, R) Partial orderings are used to give an order to sets that may not have a natural one. In our renovation example, we could define an ordering such that (a, b) ∈ R if a must be done before b can be done. 4 / 1 Partial Orderings II Definition Partial Orders CSE235 We use the notation a 4 b to indicate that (a, b) ∈ R is a partial order and a ≺ b when a 6= b.
    [Show full text]
  • 3 Limits of Sequences and Filters
    3 Limits of Sequences and Filters The Axiom of Choice is obviously true, the well-ordering theorem is obviously false; and who can tell about Zorn’s Lemma? —Jerry Bona (Schechter, 1996) Introduction. Chapter 2 featured various properties of topological spaces and explored their interactions with a few categorical constructions. In this chapter we’ll again discuss some topological properties, this time with an eye toward more fine-grained ideas. As introduced early in a study of analysis, properties of nice topological spaces X can be detected by sequences of points in X. We’ll be interested in some of these properties and the extent to which sequences suffice to detect them. But take note of the adjective “nice” here. What if X is any topological space, not just a nice one? Unfortunately, sequences are not well suited for characterizing properties in arbitrary spaces. But all is not lost. A sequence can be replaced with a more general construction—a filter—which is much better suited for the task. In this chapter we introduce filters and highlight some of their strengths. Our goal is to spend a little time inside of spaces to discuss ideas that may be familiar from analysis. For this reason, this chapter contains less category theory than others. On the other hand, we’ll see in section 3.3 that filters are a bit like functors and hence like generalizations of points. This perspective thus gives us a coarse-grained approach to investigating fine-grained ideas. We’ll go through some of these basic ideas—closure, limit points, sequences, and more—rather quickly in sections 3.1 and 3.2.
    [Show full text]
  • Ordered Sets
    Ordered Sets Motivation When we build theories in political science, we assume that political agents seek the best element in an appropriate set of feasible alternatives. Voters choose their favorite candidate from those listed on the ballot. Citizens may choose between exit and voice when unsatisfied with their government. Consequently, political science theory requires that we can rank alternatives and identify the best element in various sets of choices. Sets whose elements can be ranked are called ordered sets. They are the subject of this lecture. Relations Given two sets A and B, a binary relation is a subset R ⊂ A × B. We use the notation (a; b) 2 R or more often aRb to denote the relation R holding for an ordered pair (a; b). This is read \a is in the relation R to b." If R ⊂ A × A, we say that R is a relation on A. Example. Let A = fAustin, Des Moines, Harrisburgg and let B = fTexas, Iowa, Pennsylvaniag. Then the relation R = f(Austin, Texas), (Des Moines, Iowa), (Harrisburg, Pennsylvania)g expresses the relation \is the capital of." Example. Let A = fa; b; cg. The relation R = f(a; b); (a; c); (b; c)g expresses the relation \occurs earlier in the alphabet than." We read aRb as \a occurs earlier in the alphabet than b." 1 Properties of Binary Relations A relation R on a nonempty set X is reflexive if xRx for each x 2 X complete if xRy or yRx for all x; y 2 X symmetric if for any x; y 2 X, xRy implies yRx antisymmetric if for any x; y 2 X, xRy and yRx imply x = y transitive if xRy and yRz imply xRz for any x; y; z 2 X Any relation which is reflexive and transitive is called a preorder.
    [Show full text]
  • Partial Order Relations
    Partial Order Relations We defined three properties of relations: reflexivity, symmetry and transitivity. A fourth property of relations is anti-symmetry. Definition of Antisymmetry:: Let R be a relation on a set A, R is antisymmetric if , and only if, for all a and b in A, if a R b and b R a then a=b. Testing for Antisymmetry of finite Relations: Let R1 and R2 be the relations on {0, 1, 2} defined as follows: a- R1= { (0,2 ), (1, 2), (2, 0)} b- R2 = { (0,0), (0, 1), (0, 2), (1, 1), (1, 2)} Draw a directed graph for R1 and R2 and indicate which relation is antisymmetric? a- R1 is not antisymmetric b- R2 is antisymmetric Testing for Antisymmetry of “Divides” relations. Let R1 be the “divides” relation on the set of all positive integers, and let R2 be the “divides” relation on the set of all integers. + For all a, b ∈ Z , a R1 b ⇔ a | b For all a, b ∈ Z, a R2 b ⇔ a | b a- Is R1 antisymmetric ? Prove or give a counterexample b- Is R2 antisymmetric ? Prove or give a counter example. Solution: -R1 is antisymmetric -R2 is not antisymmetric Partial Order Relations: Let R be a binary relation defined on a set A. R is a partial order relation if, and only if, R is reflexive, antisymmetric and transitive. Two fundamental partial order relations are the “less than or equal to” relation on a set of real numbers and the “subset” relation on a set of sets. The “Subset” Relation: Let A be any collection of sets and define the subset relation ⊆ on A as follows: For all U, V ∈ A U ⊆ V ⇔ for all x, if x ∈ U then x ∈ V.
    [Show full text]
  • Relations and Partial Orders
    “mcs-ftl” — 2010/9/8 — 0:40 — page 213 — #219 7 Relations and Partial Orders A relation is a mathematical tool for describing associations between elements of sets. Relations are widely used in computer science, especially in databases and scheduling applications. A relation can be defined across many items in many sets, but in this text, we will focus on binary relations, which represent an association between two items in one or two sets. 7.1 Binary Relations 7.1.1 Definitions and Examples Definition 7.1.1. Given sets A and B, a binary relation R A B from1 A W ! to B is a subset of A B. The sets A and B are called the domain and codomain of R, respectively. We commonly use the notation aRb or a R b to denote that .a; b/ R. 2 A relation is similar to a function. In fact, every function f A B is a rela- W ! tion. In general, the difference between a function and a relation is that a relation might associate multiple elements ofB with a single element ofA, whereas a func- tion can only associate at most one element of B (namely, f .a/) with each element a A. 2 We have already encountered examples of relations in earlier chapters. For ex- ample, in Section 5.2, we talked about a relation between the set of men and the set of women where mRw if man m likes woman w. In Section 5.3, we talked about a relation on the set of MIT courses where c1Rc2 if the exams for c1 and c2 cannot be given at the same time.
    [Show full text]
  • Rel.1 Orders
    rel.1 Orders sfr:rel:ord: Many of our comparisons involve describing some objects as being \less than", explanation sec \equal to", or \greater than" other objects, in a certain respect. These involve order relations. But there are different kinds of order relations. For instance, some require that any two objects be comparable, others don't. Some include identity (like ≤) and some exclude it (like <). It will help us to have a taxonomy here. Definition rel.1 (Preorder). A relation which is both reflexive and transi- tive is called a preorder. Definition rel.2 (Partial order). A preorder which is also anti-symmetric is called a partial order. Definition rel.3 (Linear order). A partial order which is also connected is called a total order or linear order. Example rel.4. Every linear order is also a partial order, and every partial order is also a preorder, but the converses don't hold. The universal relation on A is a preorder, since it is reflexive and transitive. But, if A has more than one element, the universal relation is not anti-symmetric, and so not a partial order. ∗ Example rel.5. Consider the no longer than relation 4 on B : x 4 y iff len(x) ≤ len(y). This is a preorder (reflexive and transitive), and even con- nected, but not a partial order, since it is not anti-symmetric. For instance, 01 4 10 and 10 4 01, but 01 6= 10. Example rel.6. An important partial order is the relation ⊆ on a set of sets. This is not in general a linear order, since if a 6= b and we consider }(fa; bg) = f;; fag; fbg; fa; bgg, we see that fag * fbg and fag 6= fbg and fbg * fag.
    [Show full text]