John Deere 850K Crawler Dozer - 8/22/19 NJ State Approved Co-Op #65MCESCCPS
Total Page:16
File Type:pdf, Size:1020Kb
The Educational Services Commission of New Jersey Grounds Equipment PageBid #ESCNJ1 of 18/19-2525 John Deere 850K Crawler Dozer - 8/22/19 NJ State Approved Co-op #65MCESCCPS Current Date 22Aug2019 850K CRAWLER DOZER 850K Standard Equipment Three-function hydraulic- 12 Volt Power Port ENGINE: pilot T-bar joystick with push Electronic Monitor System John Deere PowerTech PSS button angle with Audible and Visual 6.8L certified to FT4 / Stage function for PAT Warning: IV emissions Hydraulic Diagnostic Ports Engine Coolant Temperature 187 SAE Net hp (139.5 kW): 29.7 Gallon (112 Liter) Long Track PAT Independent Hydraulic Oil Transmission Oil 205 SAE Net hp (152 kW): Reservoir Temperature Std, WT, WLT, and LGP Hydraulic Oil Temperature Isolation Mounted POWER TRAIN: Transmission Pressure No power Derating up to Dual Path Hydrostatic Machine Diagnostic Service 10,000 ft Altitude Transmission Code Electronic control with Automatic Load Sensing for Indicator lights automatic engine protection Speed and Power Low Alternator Voltage Management Engine Air Filter Restriction Dual Turbo Configuration: AutoTracking Steering Transmission Filter Variable-Geometry Control Restriction Turbocharger(VGT) and 30 Gallon (115 Liter) Hydraulic Filter Restriction Fixed Turbo Hydrostatic Reservoir Tank Water in Fuel Cooled Exhaust Gas Single Lever-Steering, Fasten-Seat-Belt Recirculation Direction / Speed Control Return-To-Neutral Diesel particulate filter with Counter Rotation Park Brake Electronically Controlled Fuel and Horn Calibration/Service Mode Delivery System Combined Decelerator/Brake Decelerator Function Mode Wet Sleeve Cylinder Liners Pedal Digital Readout: Vertical Spin-on Engine Oil Selectable reverse speed Tachometer Filter ratios 100%, 115%, or Alternator Voltage Vertical Spin on Dual Stage 130% of forward ground Hourmeter Fuel Filter speed Electronic Control with Machine Diagnostic Service Fuel/Water Sensor Automatic Transmission Code(s) Electric Fuel Primer Protection Transmission Charge Dual Safety Element Dry- Double Reduction Final Pressure Type Air Cleaner, Evacuator Drives with Wet Multi-Disk Transmission Direction and Valve Brakes Speed Engine glow plug starting Integral Final Drive Seal Diagnostic Service Codes system Protection Monitor Settings Primary and Secondary Calibration COOLING SYSTEM: Service Brakes (Conforms to Transmission Control Engine Coolant -34 Degree F ISO 10265) Settings (-37 Degree C) Automatic Spring-Applied, Machine Travel History Coolant Recovery Tank Hydraulic Released Park Gauges, Electric, V-Cool, Tilt-out fan box, Brake - Lever Illuminated: suction type Operated (Conforms to ISO Engine Coolant Temperature Automatic Reversing Cooling 10265) Fan Transmission Diagnostic Engine Oil Pressure Perforated engine hood and Ports Fuel Level 1 Bid Term: 2/20/19 - 2/19/21 https://configurator.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Equipme... 8/22/2019 The Educational Services Commission of New Jersey Grounds Equipment PageBid #ESCNJ2 of 18/19-2525 John Deere 850K Crawler Dozer - 8/22/19 NJ State Approved Co-op #65MCESCCPS side shields Selectable Decelerator Mode Electronic Engine Speed Dial Tilt-out bar-type grille with Warm-Up Indicator 10-Fin/in. Engine Coolant Horn, Electric (Conforms to Radiator UNDERCARRIAGE: SAE J994, J1446, ISO 9533) 10-Fin/in. Hydrostatic Oil-to- Oscillating Undercarriage Air Cooler 24 in. (610 mm) Closed Coded Keyless Start with 10-Fin/in. Hydraulic Oil-to- Center Moderate Service Electric Fuel Shut Off Air Cooler Single Grouser Track Interior Mounted Rearview 10-Fin/in. Charge Air Cooler Shoes Mirror (Conforms to SAE (Air to Air) Adjustable Track Sag J985) 6-Fin/in. Fuel Cooler Segmented Sprockets (Fuel/Air) Front & Rear Chain Guides OVERALL VEHICLE: Enclosed Safety Fan Guard with Bolt-on Wear Surfaces Unitized Mainframe with: (Conforms to SAE J1308 - Integral Bottom Protection ISO 3457) OPERATOR STATION: Integral front tow loops JDLink Ultimate Machine Integral Machine Transport ELECTRICAL: Monitoring System w/ 3-year Tie-Downs 24 Volt System Message Service Bolt-on Bottom Access 130 Amp Sealed Alternator Modular Design Isolation Covers for cab units Mounted ROPS/FOPS Fold-out grill 100 Amp Sealed Alternator Operator Station (Conforms Perforated Engine Side for canopy units to SAE J1040 - ISO 3471) Shields (2) Grill-Mounted and (2) Manual/Hydraulic Operated Left & Right Side Hinged Rear-Mounted Halogen Operator Station Tilt Feature Engine Access Panel Lights Hinged Mounted Hood with Prewired for Optional Roof Left and Right Front Access Radiator Access Panel Mounted Work Lights Floormat Transmission Rear Access Bypass Start Safety Cover Interior and exterior sound Cover on Starter treatment Hand holds for Machine 24 Volt Electrical Load Slip-Resistant Steps and Fueling Center Ergonomically Located Lockable Vandal Protection (2) Batteries with 190 Handholds for Left, for: Minute Reserve Capacity, Right Access (Conforms to Engine Access Panel 950 CCA SAE J185 - ISO 2867) Side tank access doors Blade-Type Fuses Air-suspension seat Fuel tank Electrical Master Disconnect Thigh Support Instrument Panel Positive Terminal Battery Lumbar Transmission Reservoir Covers Backrest Tilt Hydraulic Reservoir Reverse Warning Alarm Height, Weight and Fore-Aft 97.5 Gallon (368 Liter) Fuel (Conforms to SAE J994, Tank: J1446, ISO 9533) Side Console Leg Cushions Shut Off Valve at Tank Adjustable Armrests Outlet HYDRAULICS: Adjustable Foot Rests Water Drain on tank 43 gpm (163 L/min) Load 3 in. (76 mm) Seat Belt with Fast-Fuel Installation Ready Sensing hydraulic system Retractors (Conforms to SAE Ground Level Storage in Left with variable J386 - ISO Rear Service Compartment displacement piston pump 6683) Maintenance Free Center Pilot Pressure Control Lunch Box Storage Crossbar Pivot System Lockable Glove (Storage) Two-function hydraulic-pilot Box T-bar joystick for OSD Cupholders Built-in Operator's Manual Storage Compartment and Manual 2 Bid Term: 2/20/19 - 2/19/21 https://configurator.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Equipme... 8/22/2019 The Educational Services Commission of New Jersey Grounds Equipment PageBid #ESCNJ3 of 18/19-2525 John Deere 850K Crawler Dozer - 8/22/19 NJ State Approved Co-op #65MCESCCPS Required - You must select one from each category BASE MACHINE Ex-Works Dubuque, Iowa, United States of America As not all option codes have field kits, please review your order option codes and available kits prior to placing a machine order. Description Code Price 850K CRAWLER DOZER 8940T $341,847.00 ENGINE Description Code Price John Deere PowerTech 6 Cyl EPA FT4/EU Stage IV 0940 $10,822.00 Compliant PSS 6.8L (414 cu. in.) DOZER CONFIGURATION Description Code Price Power-Angle-Tilt (PAT) 1020 $39,348.00 Includes inside mounted C-Frame with low mounted lift cylinders. Dozer w/ 2083 mm (82 in.) Gauge Long Track Frame (8 Roller) Power-Angle-Tilt (PAT) 1030 $63,008.00 Dozer w/ 2388 mm (94 in.) Gauge Low Ground Pressure (LGP) Track Frame (8 Roller) Includes inside mounted C-Frame with low mounted lift cylinders. Outside Dozer w/ 1880 mm (74 in.) Gauge Standard Track 1040 No Added Cost Frame (7 Roller) Includes outside mounted push beams with high mounted lift cylinders. Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer). Power-Angle-Tilt (PAT) Dozer w/ 2235 mm (88 in.) Gauge 1025 $40,309.00 Wide Long Track (WLT) Frame (8 Roller) Includes inside mounted C-Frame with low mounted lift cylinders. Outside Dozer w/ 2032 mm (80 in.) Gauge Wide Track 1050 $10,576.00 (WT) Frame (7 Roller) Includes outside mounted push beams with high mounted lift cylinders. Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer). Outside Dozer w/ 2184 mm (86 in.) Gauge Low Ground 1060 $28,505.00 Pressure (LGP) Track Frame (8 Roller) Includes outside mounted push beams with high mounted lift cylinders. Lift Cylinders with Hoses Routed behind Cylinder Profile (Outside Dozer). TRACK SHOES AND CHAIN 3 Bid Term: 2/20/19 - 2/19/21 https://configurator.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Equipme... 8/22/2019 The Educational Services Commission of New Jersey Grounds Equipment PageBid #ESCNJ4 of 18/19-2525 John Deere 850K Crawler Dozer - 8/22/19 NJ State Approved Co-op #65MCESCCPS Description Code Price Standard Outside Dozer Tracks Only 40 Link 4510 No Added Cost with 24 in. (610 mm) Moderate Service Shoes 40 Link with Extended Life Bushings 4610 $3,861.00 24 in. (610 mm) Moderate Service Shoes 40 Link Moderate Service Shoes 4515 $1,190.00 with 30 in. (760 mm) Moderate Service Shoes With Clipped Corners Can only be used with code 1050 Wide Track (WT) Outside Dozer. 40 Link with Extended Life Bushings 4615 $5,048.00 30 In.(760mm) Moderate Service Shoes With Clipped Corners Can only be used with code 1050 Wide Track (WT) Outside Dozer. 40 Link 4525 $507.00 with 24 in. (610 mm) Extreme Service Shoes 40 Link with Extended Life Bushings 4625 $4,365.00 24 in. (610 mm) Extreme Service Shoes 40 Link Extreme Service Shoes 4530 $1,697.00 with 30 in. (760 mm) Extreme Service Shoes With Clipped Corners Can only be used with code 1050 Wide Track (WT) Outside Dozer. 40 Link Extreme Service Shoes 4630 $6,393.00 with Extended Life Bushing and 30 in. (760 mm) Extreme Service Shoes Can only be used with code 1050 Wide Track (WT) Outside Dozer. Extra Long Track or Low Ground Pressure Track Sealed and Lubed Track Chain W/ Moderate Service Shoes. Full Width and Closed Center Grousers except as noted. Recommend Moderate Service Shoes for Grading Applications. 45 Link Moderate Service Shoes 4535 $537.00 with 24 In. (610 mm) Moderate Service Shoes 45 Link with Extended Life Bushings 4635 $5,061.00 24 in. (610 mm) Moderate Service Shoes 45 Link Moderate Service Shoes 4540 $2,230.00 with 30 in. (760 mm) Moderate Service Shoes With Clipped Corners Requires codes 1025, 1030 or 1060. 45 Link with Extended Life Bushings 4640 $6,756.00 4 Bid Term: 2/20/19 - 2/19/21 https://configurator.deere.com/servlet/com.deere.u90947.eproducts.view.servlets.Equipme..