FINITE ELEMENTS in ANALYSIS and DESIGN an International Journal for Innovations in Computational Methodology and Application
Total Page:16
File Type:pdf, Size:1020Kb
FINITE ELEMENTS IN ANALYSIS AND DESIGN An International Journal for Innovations in Computational Methodology and Application AUTHOR INFORMATION PACK TABLE OF CONTENTS XXX . • Description p.1 • Audience p.1 • Impact Factor p.2 • Abstracting and Indexing p.2 • Editorial Board p.2 • Guide for Authors p.4 ISSN: 0168-874X DESCRIPTION . The aim of this journal is to provide ideas and information involving the use of the finite element method and its variants, both in scientific inquiry and in professional practice. The scope is intentionally broad, encompassing use of the finite element method in engineering as well as the pure and applied sciences. The emphasis of the journal will be the development and use of numerical procedures to solve practical problems, although contributions relating to the mathematical and theoretical foundations and computer implementation of numerical methods are likewise welcomed. Review articles presenting unbiased and comprehensive reviews of state-of-the-art topics will also be accommodated. All submissions to FINEL will be peer reviewed, and must have archival value to be suitable for publication. Reflecting the aforementioned emphasis on solution of practical problems, numerical demonstration of proposed methodologies will generally be considered a necessary ingredient for papers appearing in FINEL. Conversely, applications of existing finite element techniques to widely studied problems will typically not be favorably considered for publication, except where such presentations are particularly novel or enlightening, either with respect to the results obtained or the method of application used. The journal encompasses any field where numerical solution procedures for initial/boundary value problems are needed to meet design and analysis needs. Although the following list is not exhaustive, contributions are sought in structural mechanics, geomechanics, mechanical engineering, mechanics of materials, fluid mechanics, thermal sciences, hydrology, chemical engineering, biomechanics, electrical engineering, aero/astro engineering, and environmental engineering and science. In addition to contributions focused directly on numerical methodologies, submissions dealing with computer-aided engineering methods, parallel computing, optimal design strategies, mesh generation and post processing, code validation, experimental verification, and visualization are also solicited. Related Conferences will be found via the links on the right menu bar under 'Related websites'. AUDIENCE . Theoreticians, code developers, numerical analysts, and practitioners interested in tracking the latest developments in engineering computation. AUTHOR INFORMATION PACK 24 Sep 2021 www.elsevier.com/locate/finel 1 IMPACT FACTOR . 2020: 2.972 © Clarivate Analytics Journal Citation Reports 2021 ABSTRACTING AND INDEXING . ACM Computing Reviews Applied Mechanics Reviews CAD/CAM Abstracts Cambridge Scientific Abstracts Current Contents - Engineering, Computing & Technology Engineering Index Metals Abstracts Science Citation Index Shock and Vibration Digest Zentralblatt MATH Current Contents Scopus Web of Science Research Alert INSPEC EDITORIAL BOARD . Editor-in-Chief John E. Dolbow, Duke University Department of Civil and Environmental Engineering, 121 Hudson Hall, 27708-0287, Durham, North Carolina, United States of America Editorial Board W. Aquino, Duke University, Durham, NC, United States of America F. Armero, University of California Berkeley, Berkeley, California, United States of America K.J. Bathe, Adina R & D Inc., Watertown, MA, United States of America M. Bischoff, University of Stuttgart, Stuttgart, Germany M. Cerrolaza, Polytechnic University of Catalonia, Barcelona, Spain J.A.T. De Freitas, University of Lisbon Higher Technical Institute, Lisboa, Portugal C.A. Felippa, University of Colorado Boulder Ann and HJ Smead Department of Aerospace Engineering Sciences, Boulder, CO, United States of America A. Gil, Swansea University Zienkiewicz Centre for Computational Engineering, Swansea, United Kingdom R. Grandhi, Wright State University, Dayton, OH, United States of America I. Harari, Tel Aviv University Iby and Aladar Fleischman Faculty of Engineering, Tel Aviv, Israel G. Hofstetter, University of Innsbruck, Innsbruck, Austria G.M. Hulbert, University of Michigan, Ann Arbor, MI, United States of America A. Ibrahimbegovic, Ecole Normale Superieure Paris-Saclay, Cachan, France A.R. Khoei, Sharif University of Technology, Tehran, Iran F. Kikuchi, The University of Tokyo, Tokyo, Japan J.H. Kim, University of Connecticut, Storrs, CT, United States of America T.A. Laursen, Khalifa University, Abu Dhabi, United Arab Emirates S.H. Lo, The University of Hong Kong, Hong Kong, China H.A. Mang, TU Wien University, Vienna, Austria S.A. Meguid, University of Toronto, Toronto, ON, Canada H.S. Park, Boston University, Boston, MA, United States of America J.-P. Ponthot, University of Liege, Liege, Belgium M. Puso, Lawrence Livermore National Laboratory, Livermore, CA, United States of America T. Rabczuk, Bauhaus University Weimar Institute of Structural Mechanics, Weimar, Germany E. Ramm, University of Stuttgart, Stuttgart, Germany J.N. Reddy, Texas A&M University, College Station, TX, United States of America H. Schaeffer, Intelligent Synthesis Systems, San Clemente, California, United States of America G.P. Steven, Strand 7 Pty Ltd, Sydney, NSW, Australia N. Sukumar, University of California Davis, Davis, Davis, CA, USA K.Y. Sze, The University of Hong Kong, Hong Kong, China K.K. Tamma, University of Minnesota Twin Cities, Minneapolis, MN, United States of America G. Ventura, Polytechnic of Turin, Torino, Italy AUTHOR INFORMATION PACK 24 Sep 2021 www.elsevier.com/locate/finel 2 Founding Editor W.D. Pilkey, Virginia Commonwealth University, Richmond, VA, United States of America AUTHOR INFORMATION PACK 24 Sep 2021 www.elsevier.com/locate/finel 3 GUIDE FOR AUTHORS . Submission checklist You can use this list to carry out a final check of your submission before you send it to the journal for review. Please check the relevant section in this Guide for Authors for more details. Ensure that the following items are present: One author has been designated as the corresponding author with contact details: • E-mail address • Full postal address All necessary files have been uploaded: Manuscript: • Include keywords • All figures (include relevant captions) • All tables (including titles, description, footnotes) • Ensure all figure and table citations in the text match the files provided • Indicate clearly if color should be used for any figures in print Graphical Abstracts / Highlights files (where applicable) Supplemental files (where applicable) Further considerations • Manuscript has been 'spell checked' and 'grammar checked' • All references mentioned in the Reference List are cited in the text, and vice versa • Permission has been obtained for use of copyrighted material from other sources (including the Internet) • A competing interests statement is provided, even if the authors have no competing interests to declare • Journal policies detailed in this guide have been reviewed • Referee suggestions and contact details provided, based on journal requirements For further information, visit our Support Center. BEFORE YOU BEGIN Ethics in publishing Please see our information on Ethics in publishing. Declaration of competing interest All authors must disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/ registrations, and grants or other funding. Authors should complete the declaration of competing interest statement using this template and upload to the submission system at the Attach/Upload Files step. Note: Please do not convert the .docx template to another file type. Author signatures are not required. If there are no interests to declare, please choose the first option in the template. More information. Submission declaration and verification Submission of an article implies that the work described has not been published previously (except in the form of an abstract, a published lecture or academic thesis, see 'Multiple, redundant or concurrent publication' for more information), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, including electronically without the written consent of the copyright- holder. To verify originality, your article may be checked by the originality detection service Crossref Similarity Check. AUTHOR INFORMATION PACK 24 Sep 2021 www.elsevier.com/locate/finel 4 Preprints Please note that preprints can be shared anywhere at any time, in line with Elsevier's sharing policy. Sharing your preprints e.g. on a preprint server will not count as prior publication (see 'Multiple, redundant or concurrent publication' for more information). Use of inclusive language Inclusive language acknowledges diversity, conveys respect to all people, is sensitive to differences, and promotes equal opportunities. Content should make no assumptions about the beliefs or commitments of any reader; contain nothing which might imply that one individual