DOCSLIB.ORG

USBCNC Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
USBCNC Manual EDINGCNC Manual User Manual EdingCNC Software Document Release 4.02 14 June 2017 Release 4.02 1 EDINGCNC Manual Title: Eding CNC user Manual Software Author: Bert Eding Date: Wednesday, 14 June 2017 Document History Version Date Author Comment 1 2006-03-10 Bert Eding Initial version 4.02.00 19-12-2014 Bert Eding Updated for V4.02 Start with new history for V4.02 4.02.00 19-12-2014 3D printing finalized. Including support for Linear Delta systems. 4.02.00 19-12-2014 zWear and xWear (turning) added 4.02.00 19-12-2014 Chip load calculator added 4.02.00 19-12-2014 iCNC600 CPU support added 4.02.00 19-12-2014 G0 acceleration and velocity factor added. 4.02.00 19-12-2014 User macro.cnc added, there are now 2 macro files. 4.02.00 19-12-2014 M48, M49, M50, M51, M52 feed and speed override control added 4.02.00 19-12-2014 User definable M-Functions and re- definable M functions added, you can me your own M3 with this. 4.02.00 19-12-2014 Exec interpreter function allows to start external programs from the interpreter. 4.02.00 19-12-2015 G64 P.. R.. Q.. F.. The new PATH CONTROL functions here allow very FAST and constant speed foam milling. 4.02.00 19-12-2015 Firmware changes are latched ESTOP signals and use MACHINE ON virtual output that starts the watchdog signal, system-ready for iCNC600 board. 4.02.01 09-01-2015 Added shortcuts ctrl+alt+s and ctrl+alt+f, see shortcut table. 4.02.05 19-02-2015 New shortcuts to navigate directly to the F-Key menus, see keyboards shortcuts table. 4.02.12 28-03-2015 Added optional stop M1 4.02.14 30-03-2015 Added safety relay function. 4.02.19 16-05-2015 Added safety relay function. 4.02.20 20-05-2015 Added #5152 Tool output on/off 4.02.25 02-07-2015 Minor text corrections 4.02.26 08-07-2015 Added variables to contain G68 rotation and G51 scaling, see system parameters/variables table 4.02.27 13-07-2015 Tool Wear changed to Delta, so ZDelta and XDelta. This is conform Siemens CNC. Note that the signa of Delta is 14 June 2017 Release 4.02 2 EDINGCNC Manual the opposite from Wear. ZDelta negative will mill deeper as ZDelta 0. So a negative number indicates the tool Length is shorter. 4.02.28 04-09-2015 Home tandem textual update. Screens that show green Home LEDs updated, home LEDs are only YELLOW or OFF. Removed Typo’s 4.02.33 17-10-2015 Added section in chapter Run behavior during simulation and render that explains how to make macro.cnc code work correctly in simulation and render mode. 4.02.37 1-12-2015 Small text improvements 4.02.40 27-01-2016 New shortcut keys for teach in and AUX outputs. New TANKNIFE LU command for setting lift up distance. Added description of how to disable the automatic update in Windows 10. 4.02.41 02-02-2016 Added description under hand wheel setup of how to use the PAUSE input to select the hand wheel axis and the multiplication factor. 4.02.41 08-02-2016 Textual corrections 4.02.43 14-03-2016 Make software work with Windows 10 additions in chapter 1.4 Updates in system variables. 4.02.44 25-03-2016 Added #5070 spindle speed in rev/sec 4.02.45 18-04-2016 Added existing interpreter command ResetModulo for Rotation axes. 4.02.48 09-05-2016 Added description of noStartSpindleIfPauseActive and noStartJogIfPauseActive in chapter 2.1.10 Safety/Door open Input Setup. 4.02.49 27-05-2015 Updated some texts, see msg command 4.02.51 27-05-2015 Added Cross compensation for compensation non accuracy due to non-squareness of the machine XY axes. See chapter “XY Non rectangular Cross compensation” 4.02.61 13-09-2016 Added remark at IO screen that digital values are shown as RAW values. 4.02.65 04-11-2016 More explanation fir M56, how to make it render/simulation proof. 4.02.69 11-12-2016 Update description of G61/G64/LAF, Added prerequisites For nesting 14 June 2017 Release 4.02 3 EDINGCNC Manual 4.02.73 28-02-2017 M52 extension for adaptive feed Override by measuring consumed spindle power. Added WCS zeroing method, in setup this method can be switched by the G10L20 zeroing check. Added section in chapter 1 for solving problems on Windows 10 with invisible network mapped drives. 4.02.75 03-04-2017 Added explanation and function to job g-code list-box buttons in chapter “2.2.1 Operate page introduction” 4.02.77 03-05-2017 Added M57 read output values 4.02.79 07-06-2017 Added description how to change the tool number without an automatic tool change using M6T#5011 14 June 2017 Release 4.02 4 EDINGCNC Manual © Copyright Eding CNC Holding B.V. All rights reserved. Reproduction in whole or in part prohibited without the prior written consent of the copyright owner. 14 June 2017 Release 4.02 5 EDINGCNC Manual ACKNOWLEDGEMENTS The G-Code part of this user manual has been derived from the full report of the RS274/NGC language. Parts that are less relevant to EdingCNC users or parts that are not supported are left out. 14 June 2017 Release 4.02 6 EDINGCNC Manual Table of contents Table of contents .................................................................................................................................. 7 1 Introduction ................................................................................................................................... 12 1.1 Context and scope ....................................................................................................... 13 1.2 Definitions, acronyms and abbreviations ...................................................................... 14 1.3 Minimum PC requirements ........................................................................................... 15 1.4 Installation of EDINGCNC ............................................................................................. 16 1.4.1 USB ............................................................................................................................................... 16 1.4.2 Ethernet ....................................................................................................................................... 18 1.4.3 Set admin mode and switch off UAC ........................................................................................... 22 1.4.4 Read and Write privilege software directory, Windows 10 ......................................................... 24 1.4.5 Disable automatic update in Windows 10 ................................................................................... 28 1.4.6 Connected drives not visible Windows 10 ................................................................................... 30 1.4.7 Profiles, If you have different setups e.g. lathe and milling......................................................... 31 2 The user interface ....................................................................................................................... 33 2.1.1 Setup Pages .................................................................................................................................. 37 2.1.2 UI and Connection ....................................................................................................................... 37 2.1.3 Motor setup ................................................................................................................................. 38 2.1.4 Homing and ESTOP setup ............................................................................................................ 40 2.1.5 Backlash setup ............................................................................................................................. 41 2.1.6 LAF setup...................................................................................................................................... 42 2.1.7 Kinematic Setup ........................................................................................................................... 45 2.1.8 Tool change Area setup ............................................................................................................... 45 2.1.9 Tangential knife setup.................................................................................................................. 45 2.1.10 Safety/Door open Input setup ..................................................................................................... 48 2.1.11 Spindle and PWM setup ............................................................................................................... 48 2.1.12 UI setup items .............................................................................................................................. 51 2.1.13 IO setup ........................................................................................................................................ 52 2.1.14 Interpreter settings ...................................................................................................................... 53 2.1.15 Traffic light setup ......................................................................................................................... 53 2.1.16 JobTimeEstimation ....................................................................................................................... 54 2.1.17 Hand wheel Setup ........................................................................................................................ 54 2.1.18 Load/Run Automatically .............................................................................................................. 56 2.1.19 Probing Setup ..............................................................................................................................
Load more

Recommended publications
  • Lps Free to a Good Home
    List of my LPs available to eBay customers at £1 (for each LP) + Postage (These are LPs that failed to sell on eBay). All LPs are enclosed in the original cover If I was sold any extra material (such as booklets, inserts, pictorial inner sleeves) with the LP, then I will have mentioned it on the details page for the LP. The date quoted for the LP is that printed on the Record and/or Cover. I have no idea when this particular copy was pressed or issued. The pictures in this listing are scans of the covers of the actual LP records available. NOTE 1 - The bottom of each cover picture is missing as my scanner is just too small to scan the full height, but all the width is shown as I have scanned the left and right sides and stitched the pictures together. NOTE 2 - If there is a vertical dark stripe down the middle of the picture, then it is caused by the way I stitch 2 scans together, and doesn't exist on the cover itself. The list of LPs available (each LP also has a full page of details with large PICTURE) is :- Cilla Black 1978 LP Modern Priscilla (LP Never on CD Max Boyce 1977 LP The Road and the Miles...(SONGS No CD Billy Connolly 1981 LP The Pick of Billy Connolly Deanna Durbin 1982 LP Can't Help Singing (MFP 16 Tracks The Everly Brothers 1984 LP The Everly Brothers. Elton John 1974 LP Greatest Hits (Photo Inner 10 Trk Tom Jones 1982 LP It's Not Unusual (Pickwick 17 Tracks Scott Joplin 1981 LP Rag Time (12 Tracks Jazz Bette Midler 1990 LP Some People's Lives (Inner Anne Murray 1981 LP The Very Best of Anne Murray Bob Newhart 1965? LP
    [Show full text]
  • Gaslightpdffinal.Pdf
    Credits. Book Layout and Design: Miah Jeffra Cover Artwork: Pseudodocumentation: Broken Glass by David DiMichele, Courtesy of Robert Koch Gallery, San Francisco ISBN: 978-0-692-33821-6 The Writers Retreat for Emerging LGBTQ Voices is made possible, in part, by a generous contribution by Amazon.com Gaslight Vol. 1 No. 1 2014 Gaslight is published once yearly in Los Angeles, California Gaslight is exclusively a publication of recipients of the Lambda Literary Foundation's Emerging Voices Fellowship. All correspondence may be addressed to 5482 Wilshire Boulevard #1595 Los Angeles, CA 90036 Details at www.lambdaliterary.org. Contents Director's Note . 9 Editor's Note . 11 Lisa Galloway / Epitaph ..................................13 / Hives ....................................16 Jane Blunschi / Snapdragon ................................18 Miah Jeffra / Coffee Spilled ................................31 Victor Vazquez / Keiki ....................................35 Christina Quintana / A Slip of Moon ........................36 Morgan M Page / Cruelty .................................51 Wayne Johns / Where Your Children Are ......................53 Wo Chan / Our Majesties at Michael's Craft Shop ..............66 / [and I, thirty thousand feet in the air, pop] ...........67 / Sonnet by Lamplight ............................68 Yana Calou / Mortars ....................................69 Hope Thompson/ Sharp in the Dark .........................74 Yuska Lutfi Tuanakotta / Mother and Son Go Shopping ..........82 Megan McHugh / I Don't Need to Talk
    [Show full text]
  • Other Worldly Glimpses
    Rhode Island College Digital Commons @ RIC Honors Projects Overview Honors Projects 4-18-2020 Other Worldly Glimpses Jordan Payeur [email protected] Follow this and additional works at: https://digitalcommons.ric.edu/honors_projects Part of the Fiction Commons Recommended Citation Payeur, Jordan, "Other Worldly Glimpses" (2020). Honors Projects Overview. 169. https://digitalcommons.ric.edu/honors_projects/169 This Honors is brought to you for free and open access by the Honors Projects at Digital Commons @ RIC. It has been accepted for inclusion in Honors Projects Overview by an authorized administrator of Digital Commons @ RIC. For more information, please contact [email protected]. OTHER WORLDLY GLIMPSES By Jordan Payeur An Honors Project Submitted in Partial Fulfillment of the Requirements for Honors in The Department of English The School of Arts and Sciences Rhode Island College 2020 2 Author’s Note For my honors project, I decided to develop my series of short stories to reflect the different types of worlds that are built within the fantasy genre. Modernly, the terms “low fantasy” and “high fantasy” have begun to be defined as the subgenres of fantasy. These two terms have been debated, some writers and/or readers having slightly different opinions on what each encompasses. In general, low fantasy is defined as a world in which there are fantastical elements, but the story takes place within the world we live. High fantasy, on the other hand, is a world imagined by the author, entirely separate from our world (though there are various things within these other worlds that may resemble ours). The first short story in this series, “What a Life”, is a modern fairytale that represents the more tradition fantasy genre.
    [Show full text]
  • The Porcelain Tower, Or, Nine Stories of China
    %is<ii^>^ 3 1735 060 217 449 UNIVERSITY OF PITTSBURGH Dar. PR5349 S286 Darlington Atemorial Litrary T-'ki'/d. 5^.^ .:^x^ ,,W^^j^ //^c^%o////iS'^/^/2^ ^.^ . ; LIFE IN CHINA. PORCELAIN TOWER OR, NINE STORIES OP CHINA. COMPILED FROM ORIGINAL SOURCES. By " T. T. T." To raise a tower your arts apply, And build it thrice three stories high; Make every story rich and fair With blocks of wood, in carvinga rare ; With such its ruder form conceal. And make it strong with plates of steel. From the Song of the Pagoda, Jy—SheLorh. EMBELLISHED BY J. LEECH. PHILADELPHIA: LEA AND BLANCHARD. 1842. ^ 5 ^' TO HIS FRIENDS IN GENERAL, AND TO THE PUBLIC IN PARTICULAR, THE ACCOMPANYING SPECIMENS OF REAL CHINA ARE RESPECTFULLY PRESENTED, BY THEIR MOST OBSEQUIOUS SERVANT THE MANUFACTURER, WHO TAKES THIS OPPORTUNITY OF INFORMING ALL PARTIES, (and PARTICULARLY SMALL TEA-PARTIES,) THAT HIS "services" ARE ALWAYS AT THEIR COMMAND. LIST OF ILLUSTRATIONS. Fum-Fum and Fee-Fee before the Em- peror, Frontispiece. Ho-Fi caught in his own trap, - page 8'2 Din-Din suspended in his office, - 57 ^ Hyson flailed by his father, ) - 112 Si-Long's arrival at the Philosopher's, 124 Faw-Faw and Fee-Fee united, ') - 233 - Fum-Fum smoking his own tail, ) 260 " Hey-Ho discovers Fun, " ' ) ^^^ Fun lowered from the window, ) - 2S5 1^ CONTENTS. Page Invocation, , . , . viii Preface, ..... x THE FIRST STORY. Ho-Fi of the Yellow Girdle, . 13 THE SECOND STORY. Kublai Khan ; or The Siege of Kinsai, . 60 THE THIRD STORY. Fashions in Feet; or the Tale of the Beautiful To-To 86 THE FOURTH STORY.
    [Show full text]
  • Dashew Art & Writing Collective
    THE DASHEW ART & WRITING COLLECTIVE PRESENTS en ve lo pe SPRING 2019 ‘EGO’ editors note LE KANG ‘SUBMISSION’ HANNAH NAHM ‘TAMARENSSET TWO’ Dear readers, table of KHALED SAHOUR ‘SUNSET ONE’ It is our pleasure to present to you the first edition of Dashew Center’s new art and writing magazine, ALEXEY STAROSELETS Envelope. Just like the name suggests, carefully enclosed within Envelope is a special selection of artwork, contents ‘NOCTILUQUE’ ISABELLE LIN digital media and literature. It is a platform for the international students of UCLA to have a voice and express ‘TAMARNSSET THREE’ their past and present experiences with the extended UCLA community. Through the process of creation, KHALED SAHOUR Envelope hopes to enrich and enlighten the international community in UCLA. ‘CYCLING IN LA’ LIUTAURAS RUSAITIS ‘BEST OF BOTH WORLDS’ Each work is hence a unique representation of the identities of our talented group of artists. The diverse SALONI KOTHARI ‘JUST WHAT I NEEDED’ RHEA PLAWAT variety of backgrounds and experiences possessed by our international student body became immediately ‘CALIFORNIA DREAMIN’ apparent as we sifted through the submissions. It was a delight compiling such a rich body of work and finally NOVIA ELVINA ‘BEAUTY IN THORNS’ seeing it come together as one. ‘REFUGEES’ NOVIA ELVINA RHEA PLAWAT ‘DAMIEN RICE’ ‘PHYSALIS’ Envelope’s collection consists of a wide global range of masterpieces. We have poems and portraiture MARIA PAVLIDOU ISABELLE LIN exploring themes of conflicts of self-identity, such as Saloni Kothari’s painting titled “An Honest Self Portrait” ‘COSMOLOGIES’ ‘PROGRESS’ and Ainhoa Santos Goicoechea’s “Cerveza San Miguel.” We also have an amazing collection of Chinese ISABELLE LIN ORODE NANNA calligraphy that range from ones that espouse traditional values of harmony to ones that express the ‘GO BEFORE RAIN’ LIQI ZHAO ‘CYCLING IN LA’ beauty of nature.
    [Show full text]
  • (Pilot Program). Teachers Guide and Index. Indiana State Office O
    DOCUMENT RESUME ED 050 261 VT 012 915 TITLE VIEW for the Handicapped (pilot Program). Teachers Guide and Index. INSTITUTION Indiana State Office of the State Superintendent of Public Instruction, Indianapolis. PUB DATE Mar 71 NOTE 102p. EDRS PRICE EDRS Price MF-$0.65 HC-$6.58 DESCRIPTORS *Educable Mentally Handicapped, Job Skills, Job Training, Junior High Schools, Occupational Information, *Prevocational Education, Senior High Schools, *Special Education, *Teaching Guides IDENTIFIERS VIEW, Vocational Information for Education and Work ABSTRACT Compiled by special education teachers, this guide and accompanying index is for teacher use in providing a program of prevocational orientation, cross-occupational skill training, and job-specific information to educable mentally handicapped (EMH) students in junior and senior high school special education programs. Part I, Prevocational Orientation, contains purposes, concepts, and learning activities for 10 sections covering general job information such as wages and working conditions. Part II provides (1)task analysis of cleaning, moving, and proper use of tools and equipment, with activities directed toward specific task training, and (2) a skill profile for stocking, sorting, packaging, tying, care of tools and equipment, serving, driving and operating, tending, and assembling and collating, with activities directed toward development of each skill. The guide is designed to be used with a deck of Vocational Information for Education and Work (VIEW) scripts describing 5C job titles which are appropriate for EMH and generally available in Indiana. An alphabetical listing and vocabulary lists for the VIEW scripts along with "Dictionary of Occupational Titles" numbers are appended. The accompanying index describes the 50 job titles.
    [Show full text]
  • SOTT Catalogue Corporate DOWNLOAD
    Well, here you go, it ’s ready : The fifth edition of SOTT’s Tool catalog ! Once again, we’ve put a lot of work in to create an even better catalog for you. Over 100 new tools have been added, each with a clear explanation of how , when and why to use it. Isn’t it good to know that I have held each item in my hands to judge whether it is worthy to be included in the SO TT catalogue ? I can genuinely say that this fifth edition is better than ever ! We have updated the categories and added new ones. Also, we’ve also created a special selection of “tools for interior decoration films”. But in case of any remaining questions about a product… Y ou‘ve come to know us : we are always ready to help ! And so this is the perfect moment for the next happy announcement : SOTT has partnered with Solar Screen to improve service, logistics and development. Starting today, SOTT Tools and Liquids are part of Solar Screen, who with their incredible service, experience and outstanding logistic power will be able to speedily serve any customer anywhere in Europe. W e believe that this partnership will bring even more benefits to all SO TT customers. Our commitment to you remains unchanged as you will now experience it through the Solar Screens delivery program. For those who just got a scare and think that SO TT must have folded: not so fast ! I myself will continue to be personally involved in developing SO TT tools with SolarScreen.
    [Show full text]
  • Rock Album Discography Last Up-Date: September 27Th, 2021
    Rock Album Discography Last up-date: September 27th, 2021 Rock Album Discography “Music was my first love, and it will be my last” was the first line of the virteous song “Music” on the album “Rebel”, which was produced by Alan Parson, sung by John Miles, and released I n 1976. From my point of view, there is no other citation, which more properly expresses the emotional impact of music to human beings. People come and go, but music remains forever, since acoustic waves are not bound to matter like monuments, paintings, or sculptures. In contrast, music as sound in general is transmitted by matter vibrations and can be reproduced independent of space and time. In this way, music is able to connect humans from the earliest high cultures to people of our present societies all over the world. Music is indeed a universal language and likely not restricted to our planetary society. The importance of music to the human society is also underlined by the Voyager mission: Both Voyager spacecrafts, which were launched at August 20th and September 05th, 1977, are bound for the stars, now, after their visits to the outer planets of our solar system (mission status: https://voyager.jpl.nasa.gov/mission/status/). They carry a gold- plated copper phonograph record, which comprises 90 minutes of music selected from all cultures next to sounds, spoken messages, and images from our planet Earth. There is rather little hope that any extraterrestrial form of life will ever come along the Voyager spacecrafts. But if this is yet going to happen they are likely able to understand the sound of music from these records at least.
    [Show full text]
  • Spring 2009 Literary Magazine College of Southern Maryland
    Spring 2009 Literary Magazine College of Southern Maryland Featuring works from: Poet Michael S. Glaser and Novelist Wayne Karlin spring 2009 literary magazine college of southern maryland volume 16 number 2 Dio Sorride, cover photo by Paul Toscano EDITOR Neal Dwyer ASSOCIATE EDITORS Sonia Fernandez David Phalen Paul Toscano EDITING ASSISTANCE Brenda Jones PRODUCTION AND DESIGN Brenda Jones Carol Wade Connections is published at the College of Southern Maryland in December and May. Opinions expressed by the authors do not necessarily refl ect the offi cial views of the College of Southern Maryland. Please see the College of Southern Maryland web site for submission guidelines at: www.csmd.edu/Connections Table of Contents POETRY Language, Christine Redman-Waldeyer ..........................................11 Maybe His Name Was Raheem, Rachel Heinhorst ...........................12 Fading Youth, Christina Tyner ..........................................................13 Mrs. Davies’ Mittens, Judith Allen-Leventhal ..................................14 Baltimore Morning, Kate Richardson ...............................................27 Baltimore Afternoon, Kate Richardson .............................................28 Thoughts, Joanne Van Wie ...............................................................29 Feedback, Ben Rasnic .......................................................................34 Untitled, Sarah Landmann ...............................................................35 Porcelain Wings, Kathryn J. Yoder ...................................................37
    [Show full text]
  • Casta Del Sol Celebrates 45 Years New Residents Gathered For
    Annual Statements/ New Residents Gathered for Welcome Luncheon Coupon Books By Fran Morgan and Dottie Lewis, photos by Dave Ruff In December, you will receive welcomed the a HOA billing statement, reflect- new residents ing your current account balance and thanked all and a coupon book for 2018. We those who put strongly encourage you to review the event togeth- the statement and also note the er. Members assessments beginning January 1, of the Board 2018 will be $359.00 per month of Directors per homeowner. When the Board and committee transitioned to Powerstone Prop- chairs were also erty Management in mid-2017, at the luncheon. they agreed to go to monthly state- The room was festive with au- ments through the end of the year Joey and Eukie Shreman James and Shayneh Schott tumn colors, plants, and fall leaves. to assist in the transition. In 2018, early 100 new residents attended New residents have said this is a love living here. Another couple, James the Board has directed Powerstone a luncheon in their honor on Sat- N great opportunity to meet one another and Shayneh Schott, moved back to to begin coupon books. These urday, October 20 in the Vista Room. and chat about their experiences of California from Northern Virginia. coupon books will be received This annual event is hosted by the Wel- moving into Casta. New residents Joey They have moved back and forth be- by all homeowners in December come and the Social committees and and Eukie Shreman sold their home in tween California and Virginia several and will begin with your January is for those residents who moved into Mission Viejo to downsize and move times.
    [Show full text]
  • Albums‐ Chart‐History Regarding Albums Top 50 ‐ Charts Cliff Richard
    Month of 1st Entry Peak+wks # 1: DE GB USAlbums‐ Chart‐History Regarding Albums Top 50 ‐ Charts Cliff Richard 1 2 3 4 04/1959 33 4 11/1959 2 10/1960 2 04/1961 2 Cliff Cliff Sings Me And My Shadows Listen To Cliff 5 6 7 8 10/1961 1 1 12/1961 1 6 09/1962 3 01/1963 1 14 21 Today The Young Ones 32 Minutes And 17 Seconds Summer Holiday 9 10 11 12 07/1963 15 07/1963 2 09/1963 8 04/1964 27 Cliff's Greatest Cliff's Hit Album When In Spain Cliff International 13 14 15 16 07/1964 2 01/1965 13 04/1965 9 08/1965 20 Wonderful Life Aladdin Cliff Richard More Hits By Cliff Month of 1st Entry Peak+wks # 1: DE GB USAlbums‐ Chart‐History Regarding Albums Top 50 ‐ Charts Cliff Richard 17 18 19 20 01/1966 19 05/1966 9 12/1966 6 01/1967 30 Love Is Forever Kinda Latin Finders Keepers Cinderella 21 22 23 24 04/1967 23 11/1967 37 05/1968 29 11/1968 30 Don't Stop Me Now Good News Cliff In Japan Established 1958 25 26 27 28 07/1969 5 09/1969 24 12/1970 37 03/1971 41 Best Of Cliff Sincerely Tracks'n'grooves All My Love 29 30 31 32 12/1972 49 01/1974 41 05/1976 5 03/1977 8 Best Of Cliff Vol. 2 Take Me High I'm Nearly Famous Every Face Tells A Story Month of 1st Entry Peak+wks # 1: DE GB USAlbums‐ Chart‐History Regarding Albums Top 50 ‐ Charts Cliff Richard 33 34 35 36 10/1977 30 1 1 03/1978 33 10/1978 25 02/1979 5 40 Golden Greats Small Corners Green Light Thank You Very Much ‐ Reunion Concert 37 38 39 40 09/1979 6 3 01/1980 2 09/1980 14 4 07/1981 1 5 Rock'n'Roll Juvenile Move It I'm No Hero Love Songs 41 42 43 44 09/1981 44 4 09/1982 4 05/1983 7 10/1983 57 7 Wired For Sound Now You See Me Now You Dressed For The Occasion Silver Don't 45 46 47 48 07/1984 43 12/1984 43 09/1987 9 5 12/1987 12 20 Original Greats The Rock Connection Always Guarenteed Remember Me Month of 1st Entry Peak+wks # 1: DE GB USAlbums‐ Chart‐History Regarding Albums Top 50 ‐ Charts Cliff Richard 49 50 51 52 11/1988 1 2 11/1989 53 7 11/1990 65 3 11/1991 10 Private Collection Stronger From A Distance ..
    [Show full text]
  • New Routes Outer Hebrides
    NEW ROUTES The deadline for sending route descriptions to the new routes editor is 30 June each year. OUTER HEBRIDES LEWIS GREAT-BERNERA, Bostadh Crags: Bostadh Crags consist of several small outcrops around the historical Bostadh Iron House, with numerous various features including arêtes, featured walls, cracks, hanging lips etc of Lewisian Gneiss that provide easy access low-to midgrade bouldering (f3 – f5+). Some problems are bold, but in general the landings are good. The outcrops are easily seen and reached from the carpark by the Bostadh Iron House (follow road signs), and lie scattered around; some close to the beach and some just above it. Recorded problems are listed on UKClimbing.com (http://www.ukclimbing.com/logbook/crag.php?id=21095), including accurate mapping. Crag developed and problems first ascended and recorded (see UKClimbing website for details: http://www.ukclimbing.com/logbook/crag.php?id=21095). Ole Kemi. 20 Jul 2014. LEWIS SEA-CLIFFS, ARD MOR MANGERSTA, Upper Tier: Rubik 10m E1 5a *. Andy Moles, Andrey Yakunin. 9 Aug 2014. The slab and arete just left of Inner Demons. The gear is dubious in the upper half. Ruble 10m E2 5a *. Andy Moles, Andrey Yakunin. 9 Aug 2014. The slanting groove and slab just left of Rubik. Nice climbing but very little protection and some snappy holds. Lady Mariposa 10m HVS 5a *. Andy Moles, Andrey & Anastasia Yakunin. 9 Aug 2014. The next slanting groove left of Ruble. ARD FEINIS: Spicy Wall 10m E7 6c *. Dave MacLeod, Natalie Berry. May 2014. At the right end of the crag is a smooth undercut wall.
    [Show full text]