DOCSLIB.ORG

Chapter 13. TERRAIN MAPPING and ANALYSIS 13.1 Data for Terrain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chapter 13. TERRAIN MAPPING and ANALYSIS 13.1 Data for Terrain Chapter 13. TERRAIN MAPPING AND ANALYSIS 13.1 Data for Terrain Mapping and Analysis 13.1.1 DEM 13.1.2 TIN Box 13.1 Terrain Data Format 13.2 Terrain Mapping 13.2.1 Contouring 13.2.2 Vertical Profiling 13.2.3 Hill Shading Box 13.2 The Pseudoscopic Effect Box 13.3 A Worked Example of Computing Relative Radiance 13.2.4 Hypsometric Tinting 13.2.5 Perspective View 13.3 Slope and Aspect 13.3.1 Computing Algorithms for Slope and Aspect Using Raster Box 13.4 Conversion of D to Aspect Box 13.5 A Worked Example of Computing Slope and Aspect Using Raster 13.3.2 Computing Algorithms for Slope and Aspect Using TIN Box 13.6 A Worked Example of Computing Slope and Aspect Using TIN 13.3.3 Factors Influencing Slope and Aspect Measures Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 13.4 Surface Curvature Box 13.7 A Worked Example of Computing Surface Curvature 13.5 Raster Versus TIN Box 13.8 Terrain Mapping and Analysis Using ArcGIS Key Concepts and Terms Review Questions Applications: Terrain Mapping and Analysis Task 1: Use DEM for Terrain Mapping Task 2: Derive Slope, Aspect, and Curvature from DEM Task 3: Build and Display a TIN Challenge Question References 1 Data for Terrain Mapping and Analysis zDEM (digital elevation model) and TIN (triangulated irregular network) are two common types of input data for terrain mapping and analysis. zA DEM represents a regular array of elevation points. It can be converted to an elevation raster by placing each elevation point at the center of a cell. zA TIN approximates the land surface with a series of nonoverlapping triangles. zA DEM can be converted into a TIN by using the maximum z-tolerance algorithm or the VIP (very important point) algorithm. zA TIN can be converted into a DEM by using local first-order polynomial interpolation. Input Data to TIN Besides DEM, a TIN can also use additional point data such as surveyed elevation points, GPS (global positioning system) data, and LIDAR data; line data such as contour lines and breaklines; and area data such as lakes and reservoirs. 2 Figure 13.1 A breakline, shown as a dashed line in (b), subdivides the triangles in (a) into a series of smaller triangles in (c). Terrain Mapping Terrain mapping techniques include contouring, vertical profiling, hill shading, hypsometric tinting, and perspective view. 3 Figure 13.2 A contour line map. Figure 13.3 The contour line of 900 connects points that are interpolated to have the value of 900 along the triangle edges. 4 Figure 13.4 A vertical profile. Figure 13.5 An example of hill shading, with the sun’s azimuth at 315° (NW) and the sun’s altitude at 45°. 5 Figure 13.6 A hypsometric map. Different elevation zones are shown in different gray symbols. Figure 13.7 A 3-D perspective view. 6 Figure 13.8 Three controlling parameters of the appearance of a 3-D view: the viewing azimuth a is measured clockwise from the north, the viewing angle u is measured from the horizon, and the viewing distance d is measured between the observation point and the 3-D surface. Figure 13.9 Draping of streams and shorelines on a 3-D surface. 7 Figure 13.10 A 3-D perspective view of an elevation zone map. Figure 13.11 A view of 3-D buildings in Boston, Massachusetts. 8 Slope and Aspect zSlope measures the rate of change of elevation at a surface location. Slope may be expressed as percent slope or degree slope. zAspect is the directional measure of slope. Aspect starts with 0° at the north, moves clockwise, and ends with 360° also at the north. Because it is a circular measure, We often have to manipulate aspect measures before using them in data analysis. Figure 13.12 Slope, either measured in percent or degrees, can be calculated from the vertical distance a and the horizontal distance b. 9 Figure 13.13 Aspect measures are often grouped into the four principal directions (top) or eight principal directions (bottom). Figure 13.14 Transformation methods to capture the N–S direction (a), the NE–SW direction (b), the E–W direction (c), and the NW–SE direction (d). 10 Computing Algorithms for Slope and Aspect Using Raster zThe slope and aspect for an area unit (i.e., a cell or triangle) are measured by the quantity and direction of tilt of the unit’s normal vector—a directed line perpendicular to the unit. zDifferent approximation (finite difference) methods have been proposed for calculating slope and aspect from an elevation raster. Usually based on a 3-by-3 moving window, these methods differ in the number of neighboring cells used in the estimation and the weight applying to each cell. Figure 13.15 The normal vector to the cell is the directed line perpendicular to the cell. The quantity and direction of tilt of the normal vector determine the slope and aspect of the cell. 11 Figure 13.16 Ritter’s algorithm for computing slope and aspect at C0 uses the four immediate neighbors of C0. Figure 13.17 Horn’s algorithm for computing slope and aspect at C0 uses the eight neighboring cells of C0. The algorithm also applies a weight of 2 to e2, e4, e5, and e7, and a weight of 1 to e1, e3, e6, and e8. 12 Computing Algorithms for Slope and Aspect using TIN The x, y, and z values of points that make up a TIN are used to compute slope and aspect for each triangle. Figure 13.18 The algorithm for computing slope and aspect of a triangle in a TIN uses the x, y, and z values at the three nodes of the triangle. 13 Factors Influencing Slope and Aspect Measures Factors that can influence slope and aspect measures include the resolution of DEM, the quality of DEM, the computing algorithm, and local topography. Figure 13.19 DEMs at three different resolutions: USGS 30-meter DEM (a), USGS 10-meter DEM (b), and 1.83-meter DEM derived from LIDAR data (c). 14 Figure 13.20 Slope layers derived from the three DEMs in Figure 13.19. The darkness of the symbol increases as the slope becomes steeper. Surface Curvature Surface curvature measures can determine if the surface at a cell location is upwardly convex or concave. 15 National Elevation Dataset http://gisdata.usgs.gov/ned/ 16.
Load more

Recommended publications
  • Hirise Digital Elevation Model of Phobos: Implications for Morphological Analysis of Grooves
    50th Lunar and Planetary Science Conference 2019 (LPI Contrib. No. 2132) 1759.pdf HIRISE DIGITAL ELEVATION MODEL OF PHOBOS: IMPLICATIONS FOR MORPHOLOGICAL ANALYSIS OF GROOVES. R. Hemmi1 and H. Miyamoto2, 1The University Museum, The University of Tokyo (7-3-1 Hongo, Bunkyo-ku, Tokyo, 113-0033, Japan, [email protected]), 2Depatment of Systems Inno- vation, School of Engineering, The University of Tokyo Introduction: Linear narrow depressions common- ly known as “grooves,” can be observed on a variety of small bodies including Phobos, Gaspra, Ida, Eros, and small saturnian satellites [1]. Characteristics of grooves may reflect geological events, inherent in individual bodies. The surface of Phobos is mostly covered by grooves many of which are less than ~1 km wide. It remains controversial whether their morphologies rep- resent past internal (e.g., tidal disruption [2]) or exter- nal processes (e.g., crater chains [3,4], rolling boulders [5], etc.). The presence of raised rims on grooves is an important diagnostic of impact cratering processes as opposed to extensional stress which would form rim- less depressions [6]. Groove rims were previously identified from images [6–8]; however, their detailed topographies have not been well investigated. This is primarily due to limited spatial resolutions of previous digital terrain models (up to 100 meters) which are similar to the widths of target features (a few hundreds Fig. 1. HiRISE stereo pair images of Phobos (upper of meters). In this study, we produce a digital elevation images) and a part of HRSC global orthomosaic (lower model (DEM) from Mars Reconnaissance Orbiter’s image) with ground control points (magenta crosses).
    [Show full text]
  • Parameters Derived from And/Or Used with Digital Elevation Models (Dems) for Landslide Susceptibility Mapping and Landslide Risk Assessment: a Review
    International Journal of Geo-Information Review Parameters Derived from and/or Used with Digital Elevation Models (DEMs) for Landslide Susceptibility Mapping and Landslide Risk Assessment: A Review Nayyer Saleem * , Md. Enamul Huq , Nana Yaw Danquah Twumasi, Akib Javed and Asif Sajjad State Key Laboratory of Information Engineering in Surveying, Mapping and Remote Sensing, Wuhan University, Wuhan 430079, China; [email protected] (M.E.H.); [email protected] (N.Y.D.T.); [email protected] (A.J.); [email protected] (A.S.) * Correspondence: [email protected]; Tel.: +86-131-6411-7422 Received: 15 September 2019; Accepted: 27 November 2019; Published: 29 November 2019 Abstract: Digital elevation models (DEMs) are considered an imperative tool for many 3D visualization applications; however, for applications related to topography, they are exploited mostly as a basic source of information. In the study of landslide susceptibility mapping, parameters or landslide conditioning factors are deduced from the information related to DEMs, especially elevation. In this paper conditioning factors related with topography are analyzed and the impact of resolution and accuracy of DEMs on these factors is discussed. Previously conducted research on landslide susceptibility mapping using these factors or parameters through exploiting different methods or models in the last two decades is reviewed, and modern trends in this field are presented in a tabulated form. Two factors or parameters are proposed for inclusion in landslide inventory list as a conditioning factor and a risk assessment parameter for future studies. Keywords: digital elevation models (DEMs); landslide hazards; landslide susceptibility mapping; landslide conditioning factors; landslide risk assessment 1.
    [Show full text]
  • Comparative Analysis of Digital Elevation Models: a Case Study Around Madduleru River
    Indian Journal of Geo Marine Sciences Vol. 46 (07), July 2017, pp. 1339-1351 Comparative analysis of digital elevation models: A case study around Madduleru River Subbu Lakshmi. E1 & Kiran Yarrakula2* Centre for Disaster Mitigation and Management, VIT University, Vellore, Pin 632014, India *[E-mail: [email protected]] Received 14 July 2016 ; revised 28 November 2016 High resolution DEM is generated from Cartosat-1 stereo data. The performance of different DEMs is evaluated based on error statistics. To identify the hill profiles, the TIN plots have generated and compared for SRTM, Cartosat -1, and SOI toposheet. The study divulges that, elevation values of Cartosat-1 DEM are better in flat terrain and SRTM images in hilly region produced better, when compared each other. [Keywords: Cartosat-1 DEM, SRTM-DEM, Google earth, Survey of India Toposheet, Accuracy Assessment, Digital elevation model] Introduction corresponding image points are identified in the Cartosat-1 DEM with 2.5m spatial particular stereo images In general, the accuracy resolution and vertical resolution 7.5m is intended of Cartosat-1 DEM seems to be fine in the flat to be used for generating DEM. The ground terrain which is helpful to interpret the land control points and geometric model are the features13. Past few years many scientists and essential components required for generating researchers have done a series of local and global DEM from stereo data1. DEM in variety of assessments of these elevation products. Many application such as land use land cover to analyze new technologies are giving opportunities for the spatio-temporal change on the river2&3, generating digital elevation models in remote cadastral mapping, to assess the vertical sensing to determine Earth surface elevation at characteristics of topographical variability of increasing resolution for larger areas14.
    [Show full text]
  • AN ASSESSMENT of DIGITAL ELEVATION MODELS (Dems) from DIFFERENT SPATIAL DATA SOURCES
    AN ASSESSMENT OF DIGITAL ELEVATION MODELS (DEMs) FROM DIFFERENT SPATIAL DATA SOURCES Olalekan Adekunle ISIOYE, Nigeria And JOBI N Paul, Nigeria Key words : Digital Elevation Model (DEM), Google Earth image, SRTM, spot height SUMMARY Digital Elevation Model (DEM) represents a very important geospatial data type in the analysis and modelling of different hydrological and ecological phenomenon which are required in preserving our immediate environment. DEMs are typically used to represent terrain relief. DEMs are particularly relevant for many applications such as lake and water volumes estimation, soil erosion volumes calculations, flood estimate, quantification of earth materials to be moved for channels, roads, dams, embankment etc. In this study, three different sources of spatial data in the generation of DEMs (Shuttle Radar Topography Mission SRTM 30, Digitized Topographical map and Google Earth Pro.) were compared with field measured data from Total Station Instrument, the field data were used to generate a Digital Elevation Models DEMs from 495 radial points over the test site. The accuracy of generated DEMs were assessed statistically by comparing (1) estimates of some topographic attributes(slope and aspect), (2)overall spot height estimation performance and, (3) independence of spot estimation errors and the magnitude of field measured height. From the results obtained it was concluded that the DEMs from the satellite imagery (SRTM 30) does not perform well in collecting data for topographic works. The digitized topographic map gives a good result but the variation from the reference in this study may be as a result of human activities and erosion that has occurred from when the topographic map was produced and also the quality of the topographic map.
    [Show full text]
  • Airborne Lidar-Derived Digital Elevation Model for Archaeology
    remote sensing Article Airborne LiDAR-Derived Digital Elevation Model for Archaeology Benjamin Štular 1,* , Edisa Lozi´c 1,2 and Stefan Eichert 3 1 Research Centre of the Slovenian Academy of Sciences and Arts, Novi trg 2, 1000 Ljubljana, Slovenia; [email protected] 2 Institute of Classics, University of Graz, Universitätsplatz 3/II, 8010 Graz, Austria 3 Natural History Museum Vienna, Burgring 7, 1010 Vienna, Austria; [email protected] * Correspondence: [email protected] Abstract: The use of topographic airborne LiDAR data has become an essential part of archaeological prospection, and the need for an archaeology-specific data processing workflow is well known. It is therefore surprising that little attention has been paid to the key element of processing: an archaeology-specific DEM. Accordingly, the aim of this paper is to describe an archaeology-specific DEM in detail, provide a tool for its automatic precision assessment, and determine the appropriate grid resolution. We define an archaeology-specific DEM as a subtype of DEM, which is interpolated from ground points, buildings, and four morphological types of archaeological features. We introduce a confidence map (QGIS plug-in) that assigns a confidence level to each grid cell. This is primarily used to attach a confidence level to each archaeological feature, which is useful for detecting data bias in archaeological interpretation. Confidence mapping is also an effective tool for identifying the optimal grid resolution for specific datasets. Beyond archaeological applications, the confidence map provides clear criteria for segmentation, which is one of the unsolved problems of DEM interpolation.
    [Show full text]
  • Digital Elevation Models of the Moon from Earth-Based Radar Interferometry Jean-Luc Margot, Donald B
    1122 IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 38, NO. 2, MARCH 2000 Digital Elevation Models of the Moon from Earth-Based Radar Interferometry Jean-Luc Margot, Donald B. Campbell, Raymond F. Jurgens, Member, IEEE, and Martin A. Slade Abstract—Three-dimensional (3-D) maps of the nearside and of stereoscopic coverage. More recently, the Clementine space- polar regions of the Moon can be obtained with an Earth-based craft [7] carried a light detection and ranging (lidar) instrument, radar interferometer. This paper describes the theoretical back- which was used as an altimeter [1]. The lidar returned valid ground, experimental setup, and processing techniques for a se- quence of observations performed with the Goldstone Solar System data for latitudes between 79 S and 81 N, with an along-track Radar in 1997. These data provide radar imagery and digital ele- spacing varying between a few km and a few tens of km. The vation models of the polar areas and other small regions at IHH across track spacing was roughly 2.7 in longitude or 80 km m spatial and SH m height resolutions. A geocoding procedure at the equator. Because the instrument was somewhat sensitive relying on the elevation measurements yields cartographically ac- to detector noise and to solar background radiation, multiple re- curate products that are free of geometric distortions such as fore- shortening. turns were recorded for each laser pulse. An iterative filtering procedure selected 72 548 altimetry points for which the radial Index Terms—Interferometry, moon, radar, topography. error is estimated at 130 m [1].
    [Show full text]
  • How Is a Digital Elevation Model Made?
    How is a digital elevation model made? The Earth Observation Center (EOC) provides value-added products derived from remote sensing data for use in science as well as trade and industry. These value added products also include digital elevation models (DEM) derived from radar data using SAR interferometry methodology. A digital terrain model (DTM) depicts the topographical surface of the ground. This can be contrasted to a digital elevation model (DEM), which also includes all the objects on that surface, such as vegetation and buildings. In contrast to the two-dimensional representations typical of aerial or satellite images and topographical maps, DEMs have the advantage that land surface altitude information is depicted in terms of elevation values for each pixel. With this z-value a three-dimensional representation and analysis of the surface in question becomes possible. Radar recording systems offer completely new possibilities to generate digital elevation models. Since they actively send out microwave signals they do not require an external light source, as do conventional optical recording systems which depend on sunlight. This means that data can be received independently of the time of day (or night). And because of the centimeter-range wavelengths utilized, the radiation can penetrate the atmosphere virtually uncorrupted, so radar systems can operate independently of the weather as well. This radar advantage is particularly useful for areas with high annual cloud coverage, such as near the equator. The three-dimensional orientation of a ground pixel cannot be unambiguously determined with only one radar image. Similar to stereo images, two images must be recorded from different positions and then combined.
    [Show full text]
  • Remote Sensing of Terrestrial Impact Craters: the Tandem-X Digital Elevation Model
    PostPrint Version: Meteoritics & Planetary Science, 52/7, 2017 Remote sensing of terrestrial impact craters: The TanDEM-X digital elevation model Manfred GOTTWALD1, Thomas FRITZ1, Helko BREIT1, Birgit SCHÄTTLER1, Alan HARRIS2 1Remote Sensing Technology Institute, German Aerospace Center, Oberpfaffenhofen, D-82234 Wessling, Germany 2Institute of Planetary Research, German Aerospace Center, Rutherfordstrasse 2, D-12489 Berlin, Germany ABSTRACT With the TanDEM-X digital elevation model (DEM) the terrestrial solid surface is globally mapped with unprecedented accuracy. TanDEM-X is a German X-band radar mission whose two identical satellites have been operated in single-pass interferometer configuration over several years. The acquired data are processed to yield a global DEM with 12 m independent posting and relative vertical accuracies of better than 2 m and 4 m in moderate and mountainous terrain, respectively. This DEM provides new opportunities for space-borne remote sensing studies of the entire sample of terrestrial impact craters. In addition, it represents an interesting repository to aid in the search for new impact crater candidates. We have used the TanDEM-X DEM to investigate the current set of confirmed impact structures. For a subsample of the craters, including small, mid-sized and large structures, we compared the results with those from other DEMs. This quantitative analysis demonstrates the excellent quality of the TanDEM-X elevation data. Our findings help to estimate what can be gained by using the TanDEM-X DEM in impact crater studies. They may also be beneficial for identifying regions and morphologies where the search for currently unknown impact structures might be most promising. INTRODUCTION Interplanetary spaceflight over the past 50 years has shown that impact craters are abundant on large and small solid bodies throughout the Solar System.
    [Show full text]
  • Google Earth, Google Sketchup and GIS Software; an Interoperable Work Flow for Generating Elevation Data
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 30 January 2019 doi:10.20944/preprints201901.0302.v1 Google Earth, Google SketchUp and GIS software; An interoperable work flow for generating elevation data José Gomes Santos 1, *, Kevin Bento 2 and Joaquim Lourenço Txifunga 3 1 Department of Geography and Tourism – Faculty of Arts, University of Coimbra, Portugal; Centre for Studies in Geography and Regional Planning – CEGOT University of Coimbra, Coimbra 3004-530, Portugal; [email protected] 2 Department of Geography and Tourism – Faculty of Arts, University of Coimbra,; [email protected] 3 Department of Geography and Tourism – Faculty of Arts, University of Coimbra,; [email protected] * Correspondence: [email protected]; Tel.: +351 962609367 Abstract: Data creation is often the only way for researchers to produce basic geospatial information for the pursuit of more complex tasks and procedures such as those that lead to the production of new data for studies concerning river basins, slope morphodynamics, applied geomorphology and geology, urban and territorial planning, detailed studies, for example, in architecture and civil engineering, among others. This exercise results from a reflection where specific data processing tasks executed in Google Sketchup (Pro version, 2018) can be used in a context of interoperability with Geographical Information Systems (GIS) software. The focus is based on the production of contour lines and Digital Elevation Models (DEM) using an innovative sequence of tasks and procedures in both environments (GS and GIS). It starts in Google Sketchup (GS) graphic interface, with the selection of a satellite image referring to the study area – which can be anywhere on Earth's surface; subsequent processing steps lead to the production of elevation data at the selected scale and equidistance.
    [Show full text]
  • Digital Elevation Models of the Lunar Surface from Chandrayaan-2 Terrain Mapping Camera-2 (TMC-2) Imagery – Initial Results
    51st Lunar and Planetary Science Conference (2020) 1127.pdf Digital Elevation Models of the Lunar Surface from Chandrayaan-2 Terrain mapping Camera-2 (TMC-2) Imagery – Initial Results Amitabh, K Suresh, Kannan V Iyer, Ajay Parasar, Baharul Islam, Ashutosh Gupta, Abdullah S, Shweta Verma and T P Srinivasan, High resolution Data Processing Division, Signal and Image Processing Group, Space Applications Centre (ISRO), Ahmedabad-380058 (India); [email protected] Introduction: The Indian second moon mission Chan- Datasets Used: For carrying out Stereo processing of drayaan-2 was launched on 22 July 2019. The spacecraft Chandrayaan-2 TMC-2 images, three areas featuring reached the moon’s orbit on 20 August 2019 and began different surface characteristics have been chosen (ta- operations successfully. Terrain Mapping Camera-2 ble-2). (TMC-2) is one of the 08 payloads onboard Chan- drayaan-2 orbiter that will provide 3D mapping of Table-2: Test Data Sets Used moon. It is a line scanner similar to TMC of Chan- S. No. Orbit Date Centre Coordinates drayaan-1 with three CCD arrays, Fore, Nadir and Aft of looking at +25, 0 and -25 degrees respectively and pro- Pass Latitude Longitude vides three images (triplet) of the same object with three different view angles [1]. The swath and resolution of TMC are 20km and 5m, respectively. The specifications 1 628 15-10- 00.4666N 53.4545E of TMC-2 are provided in table-1. The 5 m resolution of 2019 the Chandrayaan-2 camera will provide the global ste- 2 1302 09-12- 15.2926N 43.2691E reo coverage with highest spatial resolution of all the lunar missions so far.
    [Show full text]
  • LIDAR and Digital Elevation Data
    LIDAR and Digital Elevation Data Light Detection and Ranging (LIDAR) is being used by the North Carolina Floodplain Mapping Program to generate digital elevation Fact Sheet Contents data. These highly accurate topographic data are then used with Data Acquisition Pg 1 other digital information and field data to analyze flood hazards Post-Processing Pg 2 and delineate floodplain boundaries, which are depicted on Flood Quality Control Pg 2 Insurance Rate Maps. This fact sheet provides information on this LIDAR Advantages Pg 3 new technology and the resulting products being created and LIDAR Contours Pg 3 distributed. For more information on LIDAR technologies and Available Products Pg 4 digital elevation data, the best overall reference is Digital Elevation User Generated Products Pg 5 Model Technologies and Applications: The DEM Users Manual, by Acronyms and Definitions Pg 6 the American Society for Photogrammetry and Remote Sensing, Bethesda, Maryland, 2001. How Does LIDAR Acquire Data? Airborne LIDAR sensors emit between 5,000 and 50,000 laser pulses per second in a scanning array. The most common scanning arrays, as shown below, go back and forth sideways relative to the points measured on the ground. The scan angle and flying height determine the average point spacing in the cross-flight direction, whereas the flying height and the airspeed determine the average point spacing in the in-flight direction. Each laser pulse has a pulse width (typically between 0.5 and 1 meter in diameter) and a pulse length (equivalent to the short time lapse between the time the laser pulse was turned on and off).
    [Show full text]
  • Photogrammetric Registration of Moc Imagery to Mola Profile
    ISPRS IGU CIG Table of contents Authors index Search Exit SIPT UCI ACSG Table des matières Index des auteurs Recherches Sortir PHOTOGRAMMETRIC REGISTRATION OF MOC IMAGERY TO MOLA PROFILE Jie Shan D. Scott Lee Jong-Suk Yoon Geomatics Engineering, School of Civil Engineering, Purdue University, West Lafayette, IN 47907-1284, USA [email protected] Commission IV, Working Group IV/9 KEY WORDS: Mars, Laser altimetry, Image registration, Ground control, Space mapping ABSTRACT The current Mars Global Survey (MGS) mission has been collecting high resolution digital images (MOC) and laser ranges (MOLA). The processing MOLA range data results in a global digital elevation model at ground spacings 1/64 degrees. However, many Mars exploration activities such as landing site selection, rover localization and site-specific studies require higher resolution topographic information. For this purpose, MOC images need to be processed based on photogrammetric principle along with MOLA data and other available ancillary data. As the first and also fundamental step, ground control needs to be selected for MOC images. This paper reports on our study on controlling MOC images by registering them to MOLA data. An approach is proposed which projects each MOLA footprint to MOC images using their exterior orientation parameters obtained from ancillary information about the time, location and orientation of the MOC images. Principles and technical details are presented. Using this approach, a stereopair of one of the selected candidate landing sites are associated to one MOLA profile. Consistent test results are obtained among the two images in the stereopair. Through this registration, further precision processing of MOC images is made possible.
    [Show full text]