DOCSLIB.ORG

Bis(Trimethylsilyl)Carbodiimide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Bis(Trimethylsilyl)Carbodiimide SIB1856.0 - BIS(TRIMETHYLSILYL)CARBODIIMIDE BIS(TRIMETHYLSILYL)CARBODIIMIDE Safety Data Sheet SIB1856.0 Date of issue: 09/17/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Physical state : Liquid Substance name : BIS(TRIMETHYLSILYL)CARBODIIMIDE Product code : SIB1856.0 Formula : C7H18N2Si2 Synonyms : BIS(TRIMETHYLSILYLIMINO)METHANE; N,N'-METHANETETRAYLBIS[1,1,1- TRIMETHYLSILYLAMINE] Chemical family : ORGANOSILANE 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Chemical intermediate For research and industrial use only 1.3. Details of the supplier of the safety data sheet GELEST, INC. 11 East Steel Road Morrisville, PA 19067 USA T 215-547-1015 - F 215-547-2484 - (M-F): 8:00 AM - 5:30 PM EST [email protected] - www.gelest.com 1.4. Emergency telephone number Emergency number : CHEMTREC: 1-800-424-9300 (USA); +1 703-527-3887 (International) SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (GHS-US) Flam. Liq. 3 H226 Acute Tox. 4 (Oral) H302 Skin Irrit. 2 H315 Eye Irrit. 2A H319 Full text of H-phrases: see section 16 2.2. Label elements GHS-US labeling Hazard pictograms (GHS-US) : GHS02 GHS07 Signal word (GHS-US) : Warning Hazard statements (GHS-US) : H226 - Flammable liquid and vapor H302 - Harmful if swallowed H315 - Causes skin irritation H319 - Causes serious eye irritation Precautionary statements (GHS-US) : P280 - Wear protective gloves/protective clothing/eye protection/face protection P210 - Keep away from heat, open flames, sparks. - No smoking P233 - Keep container tightly closed P240 - Ground/bond container and receiving equipment P241 - Use explosion-proof electrical equipment P242 - Use only non-sparking tools P243 - Take precautionary measures against static discharge P264 - Wash hands thoroughly after handling P270 - Do not eat, drink or smoke when using this product P330 - Rinse mouth P301+P312 - If swallowed: Call a doctor if you feel unwell P303+P361+P353 - If on skin (or hair): take off immediately all contaminated clothing. rinse skin with water/shower P332+P313 - If skin irritation occurs: Get medical advice/attention P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove 09/17/2015 EN (English US) SDS ID: SIB1856.0 Page 1 BIS(TRIMETHYLSILYL)CARBODIIMIDE Safety Data Sheet contact lenses, if present and easy to do. Continue rinsing P337+P313 - If eye irritation persists: Get medical advice/attention P321 - Specific treatment (see first aid instructions on this label) P362+P364 - Take off contaminated clothing and wash it before reuse P370+P378 - In case of fire: Use water spray, foam, carbon dioxide, dry chemical to extinguish P403+P235 - Keep in a cool place P501 - Dispose of contents/container to licensed waste disposal facility. 2.3. Other hazards No additional information available 2.4. Unknown acute toxicity (GHS US) No data available SECTION 3: Composition/information on ingredients 3.1. Substance Substance type : Mono-constituent Name : BIS(TRIMETHYLSILYL)CARBODIIMIDE CAS No : 1000-70-0 EC no : 213-673-2 Name Product identifier % Classification (GHS-US) Bis(trimethylsilyl)carbodiimide (CAS No) 1000-70-0 95 - Flam. Liq. 3, H226 100 Acute Tox. 4 (Oral), H302 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 3.2. Mixture Not applicable SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Remove contaminated clothing and shoes. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). If possible show this sheet; if not available show packaging or label. IF exposed or concerned: Get medical advice/attention. First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical advice. First-aid measures after skin contact : Wash with plenty of soap and water. Get medical advice/attention. First-aid measures after eye contact : Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention. First-aid measures after ingestion : Never give anything by mouth to an unconscious person. Get medical advice/attention. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation : May cause irritation to the respiratory tract. Symptoms/injuries after skin contact : Causes skin irritation. Symptoms/injuries after eye contact : Causes serious eye irritation. Symptoms/injuries after ingestion : Harmful if swallowed. Swallowing a small quantity of this material will result in serious health hazard. 4.3. Indication of any immediate medical attention and special treatment needed No additional information available SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Water spray. Foam. Carbon dioxide. Dry chemical. Unsuitable extinguishing media : Do not use straight streams. 5.2. Special hazards arising from the substance or mixture Fire hazard : Flammable liquid and vapor. Irritating fumes and organic acid vapors may develop when material is exposed to elevated temperatures or open flame. 5.3. Advice for firefighters Firefighting instructions : Use water spray to cool exposed surfaces. Exercise caution when fighting any chemical fire. Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Avoid all eye and skin contact and do not breathe vapor and mist. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Eliminate ignition sources. Use special care to avoid static electric charges. 09/17/2015 EN (English US) SDS ID: SIB1856.0 2/7 BIS(TRIMETHYLSILYL)CARBODIIMIDE Safety Data Sheet 6.1.1. For non-emergency personnel Protective equipment : Wear protective equipment as described in Section 8. Emergency procedures : Evacuate unnecessary personnel. 6.1.2. For emergency responders Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with proper protection. For further information refer to section 8: "Exposure controls/personal protection". 6.2. Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up For containment : Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams. Methods for cleaning up : Clean up any spills as soon as possible, using an absorbent material to collect it. Sweep or shovel spills into appropriate container for disposal. Use only non-sparking tools. 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed : Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Precautions for safe handling : Avoid all eye and skin contact and do not breathe vapor and mist. Provide good ventilation in process area to prevent accumulation of vapors. Ground/bond container and receiving equipment. Take precautionary measures against static discharge. Use only non-sparking tools. Hygiene measures : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash contaminated clothing before reuse. 7.2. Conditions for safe storage, including any incompatibilities Technical measures : Proper grounding procedures to avoid static electricity should be followed. Use explosion-proof electrical equipment. Storage conditions : Keep container tightly closed. Keep in a cool place. Incompatible materials : Acids. Alcohols. Oxidizing agent. Peroxides. Storage area : Store in a well-ventilated place. Store away from heat. 7.3. Specific end use(s) No additional information available SECTION 8: Exposure controls/personal protection 8.1. Control parameters No additional information available 8.2. Exposure controls Appropriate engineering controls : Provide local exhaust or general room ventilation. Personal protective equipment : Avoid all unnecessary exposure. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Hand protection : Neoprene or nitrile rubber gloves. Eye protection : Chemical goggles. Contact lenses should not be worn. Skin and body protection : Wear suitable protective clothing. Respiratory protection : Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. NIOSH-certified combination organic vapor - amine gas (brown cartridge) respirator. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Clear liquid. Molecular mass : 186.4 g/mol Color : Straw. Odor : Mild. Odor threshold : No data available Refractive index : 1.4351 pH : No data available 09/17/2015 EN (English US) SDS ID: SIB1856.0 3/7 BIS(TRIMETHYLSILYL)CARBODIIMIDE Safety Data Sheet Relative evaporation rate (butyl acetate=1) : No data available Melting point : No data available Freezing point : -23 °C Boiling point : 164 °C Flash point : 42 °C Auto-ignition temperature : No data available Decomposition temperature
Load more

Recommended publications
  • Polycarbodiimides As Classification-Free and Easy to Use Crosslinkers for Water-Based Coatings
    White paper Polycarbodiimides as classification-free and easy to use crosslinkers for water-based coatings By Dr. A.J. Derksen, Stahl International bv, The Netherlands Polycarbodiimides (CDl) selectively react with carboxylic acid (–COOH) groups in polymer chains. This type of crosslinking reaction results in a classic 3D polymer-crosslinker network. Compared to polyisocyanates, polycarbodiimides are much less sensitive to presence of water and able to achieve long pot lives. Due to the high reactivity, curing with CDI type crosslinkers can be done under room temperature or typical oven conditions used for drying of applied coatings. In addition to standard CDI crosslinker chemistry, on offer is also a range of dual reactivity CDI crosslinkers. A second type of reactive groups is attached to the polycarbodiimide in this range. Upon curing, this crosslinker not only reacts with the –COOH groups in the polymer chains, but also two of the reactive groups attached to the separate CDI molecules can couple to form an even denser network structure. Building further on the success of these polycarbodiimide crosslinkers, VOC-free polycarbodiimides, in aqueous delivery form, were introduced, which give extreme long pot lives. 1. Introduction when dealing with flexible substrates. A high level of crosslinking Crosslinking is widely practiced in nearly all the coating may be acceptable for hard coatings on rigid substrates, but industries in order to improve the performance of the coating. low levels may be best for soft coatings on extensible, flexible These improvements include wear, abrasion and chemical substrates such as rubber and leather. An important crosslinking resistances and toughness1. The improved performance originates system for aqueous resins involves the use of water-dispersible from the formation of a continuous three-dimensional network, oligomeric polyisocyanates.
    [Show full text]
  • Origins of Life: Transition from Geochemistry to Biogeochemistry
    December 2016 Volume 12, Number 6 ISSN 1811-5209 Origins of Life: Transition from Geochemistry to Biogeochemistry NITA SAHAI and HUSSEIN KADDOUR, Guest Editors Transition from Geochemistry to Biogeochemistry Staging Life: Warm Seltzer Ocean Incubating Life: Prebiotic Sources Foundation Stones to Life Prebiotic Metal-Organic Catalysts Protometabolism and Early Protocells pub_elements_oct16_1300&icpms_Mise en page 1 13-Sep-16 3:39 PM Page 1 Reproducibility High Resolution igh spatial H Resolution High mass The New Generation Ion Microprobe for Path-breaking Advances in Geoscience U-Pb dating in 91500 zircon, RF-plasma O- source Addressing the growing demand for small scale, high resolution, in situ isotopic measurements at high precision and productivity, CAMECA introduces the IMS 1300-HR³, successor of the internationally acclaimed IMS 1280-HR, and KLEORA which is derived from the IMS 1300-HR³ and is fully optimized for advanced U-Th-Pb mineral dating. • New high brightness RF-plasma ion source greatly improving spatial resolution, reproducibility and throughput • New automated sample loading system with motorized sample height adjustment, significantly increasing analysis precision, ease-of-use and productivity • New UV-light microscope for enhanced optical image resolution (developed by University of Wisconsin, USA) ... and more! Visit www.cameca.com or email [email protected] to request IMS 1300-HR³ and KLEORA product brochures. Laser-Ablation ICP-MS ~ now with CAMECA ~ The Attom ES provides speed and sensitivity optimized for the most demanding LA-ICP-MS applications. Corr. Pb 207-206 - U (238) Recent advances in laser ablation technology have improved signal 2SE error per sample - Pb (206) Combined samples 0.076121 +/- 0.002345 - Pb (207) to background ratios and washout times.
    [Show full text]
  • Dimethyl Sulfoxide Oxidation of Primary Alcohols
    Western Michigan University ScholarWorks at WMU Master's Theses Graduate College 8-1966 Dimethyl Sulfoxide Oxidation of Primary Alcohols Carmen Vargas Zenarosa Follow this and additional works at: https://scholarworks.wmich.edu/masters_theses Part of the Chemistry Commons Recommended Citation Zenarosa, Carmen Vargas, "Dimethyl Sulfoxide Oxidation of Primary Alcohols" (1966). Master's Theses. 4374. https://scholarworks.wmich.edu/masters_theses/4374 This Masters Thesis-Open Access is brought to you for free and open access by the Graduate College at ScholarWorks at WMU. It has been accepted for inclusion in Master's Theses by an authorized administrator of ScholarWorks at WMU. For more information, please contact [email protected]. DIMETHYL SULFOXIDE OXIDATION OF PRIMARY ALCOHOLS by Carmen Vargas Zenarosa A thesis presented to the Faculty of the School of Graduate Studies in partial fulfillment of the Degree of Master of Arts Western Michigan University Kalamazoo, Michigan August, 1966 ACKNOWLEDGMENTS The author wishes to express her appreciation to the members of her committee, Dr, Don C. Iffland and Dr. Donald C, Berndt, for their helpful suggestions and most especially to Dr, Robert E, Harmon for his patience, understanding, and generous amount of time given to insure the completion of this work. Appreciation is also expressed for the assistance given by her. colleagues. The author acknowledges the assistance given by the National Institutes 0f Health for this research project. Carmen Vargas Zenarosa ii TABLE OF CONTENTS Page
    [Show full text]
  • The Importance of Reaction Conditions on the Chemical Structure of N,O-Acylated Chitosan Derivatives
    molecules Article The Importance of Reaction Conditions on the Chemical Structure of N,O-Acylated Chitosan Derivatives Agnieszka Piegat 1,* , Agata Goszczy ´nska 1, Tomasz Idzik 2 and Agata Niemczyk 1 1 West Pomeranian University of Technology Szczecin, Faculty of Chemical Technology and Engineering, Polymer Institute, Division of Functional Materials and Biomaterials, 45 Piastow Ave, 70-311 Szczecin, Poland 2 West Pomeranian University of Technology Szczecin, Faculty of Chemical Technology and Engineering, Department of Organic and Physical Chemistry, 42 Piastow Ave, 71-065 Szczecin, Poland * Correspondence: [email protected]; Tel.: +48-91-449-44-55 Academic Editor: Massimiliano Fenice Received: 16 July 2019; Accepted: 21 August 2019; Published: 22 August 2019 Abstract: The structure of acylated chitosan derivatives strongly determines the properties of obtained products, influencing their hydrodynamic properties and thereby their solubility or self-assembly susceptibility. In the present work, the significance of slight changes in acylation conditions on the structure and properties of the products is discussed. A series of chitosan-acylated derivatives was synthesized by varying reaction conditions in a two-step process. As reaction media, two diluted acid solutions—i.e., acetic acid and hydrochloric acid)—and two coupling systems—i.e., 1-ethyl-3-(3-dimethyl-aminopropyl)-1-carbodiimide hydrochloride (EDC) and N–hydroxysulfosuccinimide (EDC/NHS)—were used. The chemical structure of the derivatives was studied in detail by means of two spectroscopic methods, namely infrared and nuclear magnetic resonance spectroscopy, in order to analyze the preference of the systems towards N- or O-acylation reactions, depending on the synthesis conditions used. The results obtained from advanced 1H-13C HMQC spectra emphasized the challenge of achieving a selective acylation reaction path.
    [Show full text]
  • Biophysical Properties of the Iron-Sulfur Clusters In
    Properties of Iron-Sulfur Clusters in Heterodisulfide Reductase by Carly Engel A dissertation submitted to the Graduate Faculty of Auburn University in partial fulfillment of the requirements for the Degree of Doctor of Philosophy Auburn, Alabama August 3, 2019 Keywords: heterodisulfide reductase, iron-sulfur clusters, electron paramagnetic resonance, redox studies, rapid freeze quench Approved by Evert Duin, Chair, Professor of Biochemistry Doug Goodwin, Associate Professor of Biochemistry Holly Ellis, William P. Molette Professor of Biochemistry Anne Gorden, Associate Professor of Chemistry Robert Pantazes, Assistant Professor of Chemical Engineering Abstract Global warming is a continuing crisis today. It has caused great damage to our planet and health. One of the leading causes of this issue originates from humans releasing an enormous amount of greenhouse gases into the air, in particular CO2 and CH4. Infrared radiation produced by the sun become trapped by these molecules and, therefore, increases the Earth’s temperature drastically. Ultimately, the source of most of the CH4 is biological. One enzyme known to aid in the production of methane is heterodisulfide reductase (Hdr). Hdr recycles the substrates used by the enzyme that catalyzes the methane formation. In addition, reduced ferredoxin (FdRED) is produced and used to push the first step in methanogenesis. The goal of this research is to understand the role of the cofactors, iron-sulfur clusters, and flavin adenine dinucleotide (FAD) in catalysis, with emphasis on the flavin-based electron bifurcation process and heterodisulfide (HDS) reduction. Redox titrations of methyl-viologen hydrogenase: heterodisulfide reductase (Mvh:Hdr) yielded multiple midpoint potentials for different [4Fe-4S]+ and [2Fe-2S]+ clusters.
    [Show full text]
  • Pahs) in Aqueous Environmental Samples
    Sensing and Bio-Sensing Research 7 (2016) 115–120 Contents lists available at ScienceDirect Sensing and Bio-Sensing Research journal homepage: www.elsevier.com/locate/sbsr A highly sensitive monoclonal antibody based biosensor for quantifying 3–5 ring polycyclic aromatic hydrocarbons (PAHs) in aqueous environmental samples Xin Li, Stephen L. Kaattari, Mary A. Vogelbein, George G. Vadas, Michael A. Unger ⁎ Department of Aquatic Health Sciences, Virginia Institute of Marine Science, College of William & Mary, Gloucester Point, VA 23062, United States article info abstract Article history: Immunoassays based on monoclonal antibodies (mAbs) are highly sensitive for the detection of polycyclic Received 4 December 2015 aromatic hydrocarbons (PAHs) and can be employed to determine concentrations in near real-time. A sensitive Received in revised form 3 February 2016 generic mAb against PAHs, named as 2G8, was developed by a three-step screening procedure. It exhibited nearly Accepted 4 February 2016 uniformly high sensitivity against 3-ring to 5-ring unsubstituted PAHs and their common environmental meth- Available online xxxx ylated PAHs, with IC50 values between 1.68 and 31 μg/L (ppb). 2G8 has been successfully applied on the KinExA – Keywords: Inline Biosensor system for quantifying 3 5 ring PAHs in aqueous environmental samples. PAHs were detected at μ Monoclonal antibody a concentration as low as 0.2 g/L. Furthermore, the analyses only required 10 min for each sample. To evaluate PAH the accuracy of the 2G8-based biosensor, the total PAH concentrations in a series of environmental samples an- Pore water alyzed by biosensor and GC–MS were compared. In most cases, the results yielded a good correlation between Biosensor methods.
    [Show full text]
  • Organometallic Nanoprobe to Enhance Optical Response on the Polycyclic Aromatic Hydrocarbon Benzo[A]Pyrene Immunoassay Using SERS Technology
    1 Environmental Science And Pollution Research Achimer December 2017, Volume 24 Issue 35 Pages 27070-27076 http://dx.doi.org/10.1007/s11356-014-3384-8 http://archimer.ifremer.fr http://archimer.ifremer.fr/doc/00417/52844/ © Springer-Verlag Berlin Heidelberg 2014 Organometallic nanoprobe to enhance optical response on the polycyclic aromatic hydrocarbon benzo[a]pyrene immunoassay using SERS technology Dribek Mohamed 1, 3, Rinnert Emmanuel 1, *, Colas Florent 1, Crassous Marie-Pierre 1, Thioune Nene 2, David Carmen 2, 4, De La Chapelle Marc 2, Compere Chantal 1 1 IFREMER, Lab Detect Capteurs & Mesures, CS10070, F-29280 Plouzane, France. 2 Univ Paris 13, UFR SMBH, Lab CSPBAT FRE 3043, 74 Rue Marcel Cachin, F-93017 Bobigny, France. 3 Univ Francois Rabelais Tours, UFR Sci Pharmaceut, EA Nanomedicaments & Nanosondes 6295, 31 Ave Monge, F-37200 Tours, France. 4 Horiba Sci, 231 Rue Lille, F-59650 Villeneuve Dascq, France. * Corresponding author : Emmanuel Rinnert, email address : [email protected] Abstract : We demonstrated the use of a new organometallic nanoprobe for competitive surface-enhanced Raman scattering (SERS) immunoassay devoted to the detection of polycyclic aromatic hydrocarbons (PAH) such as benzo[a]pyrene (BaP) in seawater. The nanoprobes are gold nanoparticles (GNPs) labeled by a Raman reporter, the 5,5'-dithiobis(succinimidyl-2-nitrobenzoate) (DSNB) and functionalized with monoclonal antibodies anti-BaP. The antibodies are bound with a high specificity to the analyte while the GNPs enhanced the Raman scattering of the DSNB. This type of immunoassay involved the grafting of BaP onto a sensing surface. Thus, NH2-terminated self-assembled monolayer is formed on the surface of gold substrate using cysteamine.
    [Show full text]
  • Fully Inkjet-Printed Biosensors Fabricated with a Highly Stable Ink Based on Carbon Nanotubes and Enzyme-Functionalized Nanoparticles
    nanomaterials Article Fully Inkjet-Printed Biosensors Fabricated with a Highly Stable Ink Based on Carbon Nanotubes and Enzyme-Functionalized Nanoparticles Mijal Mass 1 , Lionel S. Veiga 1, Octavio Garate 1, Gloria Longinotti 1, Ana Moya 2,†, Eloi Ramón 2 , Rosa Villa 2,3, Gabriel Ybarra 1,* and Gemma Gabriel 2,3,* 1 INTI-Micro y Nanotecnologías, Instituto Nacional de Tecnología Industrial (INTI), San Martín, Buenos Aires B1650WAB, Argentina; [email protected] (M.M.); [email protected] (L.S.V.); [email protected] (O.G.); [email protected] (G.L.) 2 Institut de Microelectrònica de Barcelona, IMB-CNM (CSIC), Campus Universitat Autònoma de Barcelona, Cerdanyola del Vallès, 08193 Barcelona, Spain; [email protected] (A.M.); [email protected] (E.R.); [email protected] (R.V.) 3 CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), 28029 Madrid, Spain * Correspondence: [email protected] (G.Y.); [email protected] (G.G.) † Present Addresses: Eurecat, Centre Tecnològic de Catalunya, Functional Printing & Embedded Devices Unit, 08302 Mataró, Spain. Abstract: Enzyme inks can be inkjet printed to fabricate enzymatic biosensors. However, inks Citation: Mass, M.; Veiga, L.S.; containing enzymes present a low shelf life because enzymes in suspension rapidly lose their Garate, O.; Longinotti, G.; Moya, A.; catalytic activity. Other major problems of printing these inks are the non-specific adsorption of Ramón, E.; Villa, R.; Ybarra, G.; enzymes onto the chamber walls and stability loss during printing as a result of thermal and/or Gabriel, G. Fully Inkjet-Printed mechanical stress.
    [Show full text]
  • Β-Cyclodextrin Modified Metal Nanoparticles for the Detection of Cholesterol Using SERS
    β-cyclodextrin Modified Metal Nanoparticles for the Detection of Cholesterol using SERS A thesis submitted to the Graduate School of the University of Cincinnati in partial fulfillment of the requirements for the degree of Master of Science In the Department of Chemistry of the College of Arts and Sciences by April Milarcik April 2014 B.S. Muskingum University May 2000 Committee Chair: Peng Zhang, Ph.D. Abstract β-cyclodextrin modified metal nanoparticles were investigated for the detection of cholesterol using Surface Enhanced Raman Spectroscopy (SERS). Gold and silver nanoparticles were reduced and capped with β-cyclodextrin or modified by polyelectrolyte assembly using PAH and β-cyclodextrin modified PAA polymers. The Raman spectrum of cholesterol should be enhanced due to formation of an inclusion complex with β-cyclodextrin and therefore location close to the metal surface. Suitable detection limit and repeatability for this application was not obtained through successive experiments to improve both the nanoparticles and the measurement parameters. Further improvements of β-cyclodextrin modified metal nanoparticles could provide a detection method for cholesterol using SERS with suitable repeatability and detection limit. ii iii Acknowledgements I would like to thank my research advisor, Dr. Peng Zhang, for his guidance. I would also like to thank Dr. Changwon Lee for his guidance and instruction. I would like to thank my committee members, Dr. Joseph Caruso and Dr. William Heineman, for their suggestions and review. I would like to thank my family, boyfriend, friends, and colleagues who offered their encouragement, advice, and support. I remember my father with love and gratitude. Finally, I would like to thank God for continuing to work in my life.
    [Show full text]
  • N-Heterocyclic Carbene–Carbodiimide (NHC–CDI) Betaine Adducts: Synthesis, Characterization, Cite This: Chem
    Chemical Science PERSPECTIVE View Article Online View Journal | View Issue N-Heterocyclic carbene–carbodiimide (NHC–CDI) betaine adducts: synthesis, characterization, Cite this: Chem. Sci.,2021,12, 2699 properties, and applications All publication charges for this article have been paid for by the Royal Society of Chemistry Jessica R. Lamb, †* Christopher M. Brown and Jeremiah A. Johnson * N-Heterocyclic carbenes (NHCs) are an important class of reactive organic molecules used as ligands, organocatalysts, and s-donors in a variety of electroneutral ylide or betaine adducts with main-group compounds. An emerging class of betaine adducts made from the reaction of NHCs with carbodiimides (CDIs) form zwitterionic amidinate-like structures with tunable properties based on the highly modular NHC and CDI scaffolds. The adduct stability is controlled by the substituents on the CDI nitrogens, while the NHC substituents greatly affect the configuration of the adduct in the solid state. This Perspective is Received 24th November 2020 intended as a primer to these adducts, touching on their history, synthesis, characterization, and general Accepted 18th January 2021 properties. Despite the infancy of the field, NHC–CDI adducts have been applied as amidinate-type DOI: 10.1039/d0sc06465c Creative Commons Attribution 3.0 Unported Licence. ligands for transition metals and nanoparticles, as junctions in zwitterionic polymers, and to stabilize rsc.li/chemical-science distonic radical cations. These applications and potential future directions are discussed.
    [Show full text]
  • Hydrogels Based on Schiff Base Linkages for Biomedical Applications
    molecules Review Hydrogels Based on Schiff Base Linkages for Biomedical Applications 1, 1, 1,2, Junpeng Xu y, Yi Liu y and Shan-hui Hsu * 1 Institute of Polymer Science and Engineering, National Taiwan University, No. 1, Sec. 4 Roosevelt Road, Taipei 10617, Taiwan 2 Institute of Cellular and System Medicine, National Health Research Institutes, No. 35 Keyan Road, Miaoli 35053, Taiwan * Correspondence: [email protected]; Tel.: +886-2-3366-5313; Fax: +886-2-3366-5237 These authors contributed equally to this paper. y Received: 19 July 2019; Accepted: 13 August 2019; Published: 19 August 2019 Abstract: Schiff base, an important family of reaction in click chemistry, has received significant attention in the formation of self-healing hydrogels in recent years. Schiff base reversibly reacts even in mild conditions, which allows hydrogels with self-healing ability to recover their structures and functions after damages. Moreover, pH-sensitivity of the Schiff base offers the hydrogels response to biologically relevant stimuli. Different types of Schiff base can provide the hydrogels with tunable mechanical properties and chemical stabilities. In this review, we summarized the design and preparation of hydrogels based on various types of Schiff base linkages, as well as the biomedical applications of hydrogels in drug delivery, tissue regeneration, wound healing, tissue adhesives, bioprinting, and biosensors. Keywords: Schiff base; hydrogel; click chemistry; self-healing; dynamic covalent bond; tissue engineering 1. Introduction Hydrogels with a three-dimensional structure and high water content are an important category of soft materials [1,2]. Hydrogels provide a physiologically similar environment for cell growth and they are often used to mimic the extracellular matrix (ECM) [3].
    [Show full text]
  • Direct and Rapid Measurement of Hydrogen Peroxide in Human Blood Using a Microfuidic Device R
    www.nature.com/scientificreports OPEN Direct and rapid measurement of hydrogen peroxide in human blood using a microfuidic device R. Gaikwad1, P. R. Thangaraj2 & A. K. Sen1* The levels of hydrogen peroxide (H 2O2 ) in human blood is of great relevance as it has emerged as an important signalling molecule in a variety of disease states. Fast and reliable measurement of H2O2 levels in the blood, however, continues to remain a challenge. Herein we report an automated method employing a microfuidic device for direct and rapid measurement of H2O2 in human blood based on laser-induced fuorescence measurement. Our study delineates the critical factors that afect measurement accuracy—we found blood cells and soluble proteins signifcantly alter the native H2O2 levels in the time interval between sample withdrawal and detection. We show that separation of blood cells and subsequent dilution of the plasma with a bufer at a ratio of 1:6 inhibits the above efect, leading to reliable measurements. We demonstrate rapid measurement of H2O2 in plasma in the concentration range of 0–49 µM, ofering a limit of detection of 0.05 µM, a sensitivity of 0.60 µM−1, and detection time of 15 min; the device is amenable to the real-time measurement of H2O2 in the patient’s blood. Using the linear correlation obtained with known quantities of H2O2 , the endogenous H2O2 concentration in the blood of healthy individuals is found to be in the range of 0.8–6 µM. The availability of this device at the point of care will have relevance in understanding the role of H2O2 in health and disease.
    [Show full text]