DOCSLIB.ORG

Safety Data Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Safety Data Sheet SAFETY DATA SHEET Creation Date 22-Sep-2009 Revision Date 10-Dec-2020 Revision Number 5 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product Description: Allyl chloride, stabilized Cat No. : 102910000; 102910010; 102911000; 102910025 Synonyms 3-Chloropropene CAS-No 107-05-1 EC-No. 203-457-6 Molecular Formula C3 H5 Cl 1.2. Relevant identified uses of the substance or mixture and uses advised against Recommended Use Laboratory chemicals. Uses advised against No Information available 1.3. Details of the supplier of the safety data sheet Company UK entity/business name Fisher Scientific UK Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom EU entity/business name Acros Organics BVBA Janssen Pharmaceuticalaan 3a 2440 Geel, Belgium E-mail address [email protected] 1.4. Emergency telephone number For information US call: 001-800-ACROS-01 / Europe call: +32 14 57 52 11 Emergency Number US:001-201-796-7100 / Europe: +32 14 57 52 99 CHEMTREC Tel. No.US:001-800-424-9300 / Europe:001-703-527-3887 SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the substance or mixture CLP Classification - Regulation (EC) No 1272/2008 Physical hazards Flammable liquids Category 2 (H225) Health hazards ______________________________________________________________________________________________ ACR10291 Page 1 / 12 SAFETY DATA SHEET Allyl chloride, stabilized Revision Date 10-Dec-2020 ______________________________________________________________________________________________ Acute oral toxicity Category 4 (H302) Acute dermal toxicity Category 4 (H312) Acute Inhalation Toxicity - Vapors Category 4 (H332) Skin Corrosion/Irritation Category 2 (H315) Serious Eye Damage/Eye Irritation Category 2 (H319) Germ Cell Mutagenicity Category 2 (H341) Carcinogenicity Category 2 (H351) Specific target organ toxicity - (single exposure) Category 3 (H335) Specific target organ toxicity - (repeated exposure) Category 2 (H373) Environmental hazards Acute aquatic toxicity Category 1 (H400) Full text of Hazard Statements: see section 16 2.2. Label elements Signal Word Danger Hazard Statements H225 - Highly flammable liquid and vapor H319 - Causes serious eye irritation H351 - Suspected of causing cancer H341 - Suspected of causing genetic defects H373 - May cause damage to organs through prolonged or repeated exposure H315 - Causes skin irritation H335 - May cause respiratory irritation H400 - Very toxic to aquatic life H302 + H312 + H332 - Harmful if swallowed, in contact with skin or if inhaled Precautionary Statements P280 - Wear protective gloves/protective clothing/eye protection/face protection P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P302 + P352 - IF ON SKIN: Wash with plenty of soap and water P332 + P313 - If skin irritation occurs: Get medical advice/attention P337 + P313 - If eye irritation persists: Get medical advice/attention P240 - Ground and bond container and receiving equipment P243 - Take action to prevent static discharges P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking P261 - Avoid breathing dust/fume/gas/mist/vapors/spray P260 - Do not breathe dust/fume/gas/mist/vapors/spray P273 - Avoid release to the environment P301 + P312 - IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P403 + P235 - Store in a well-ventilated place. Keep cool ______________________________________________________________________________________________ ACR10291 Page 2 / 12 SAFETY DATA SHEET Allyl chloride, stabilized Revision Date 10-Dec-2020 ______________________________________________________________________________________________ 2.3. Other hazards Lachrymator (substance which increases the flow of tears) SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS 3.1. Substances Component CAS-No EC-No. Weight % CLP Classification - Regulation (EC) No 1272/2008 Allyl chloride 107-05-1 EEC No. 203-457-6 >95 Acute Tox. 4 (H302) Acute Tox. 4 (H312) Acute Tox. 4 (H332) Skin Irrit. 2 (H315) Eye Irrit. 2 (H319) Muta. 2 (H341) Carc. 2 (H351) STOT SE 3 (H335) STOT RE 2 (H373) Aquatic Acute 1 (H400) Flam. Liq. 2 (H225) Propylene oxide 75-56-9 EEC No. 200-879-2 0.05-0.09 Flam. Liq. 1 (H224) Acute Tox. 4 (H302) Acute Tox. 3 (H311) Acute Tox. 3 (H331) Eye Irrit. 2 (H319) STOT SE 3 (H335) Muta. 1B (H340) Carc. 1B (H350) Component Specific concentration limits M-Factor Component notes (SCL's) Allyl chloride - 1 - Full text of Hazard Statements: see section 16 SECTION 4: FIRST AID MEASURES 4.1. Description of first aid measures Eye Contact Immediate medical attention is required. Get medical attention. Skin Contact Wash off immediately with plenty of water for at least 15 minutes. Immediate medical attention is required. Ingestion Do NOT induce vomiting. Get medical attention. Inhalation Remove to fresh air. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Immediate medical attention is required. If not breathing, give artificial respiration. Self-Protection of the First Aider Ensure that medical personnel are aware of the material(s) involved, take precautions to protect themselves and prevent spread of contamination. 4.2. Most important symptoms and effects, both acute and delayed Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like ______________________________________________________________________________________________ ACR10291 Page 3 / 12 SAFETY DATA SHEET Allyl chloride, stabilized Revision Date 10-Dec-2020 ______________________________________________________________________________________________ headache, dizziness, tiredness, nausea and vomiting 4.3. Indication of any immediate medical attention and special treatment needed Notes to Physician Treat symptomatically. Symptoms may be delayed. SECTION 5: FIREFIGHTING MEASURES 5.1. Extinguishing media Suitable Extinguishing Media Carbon dioxide (CO 2). Dry chemical. Water mist may be used to cool closed containers. Chemical foam. Water mist may be used to cool closed containers. Extinguishing media which must not be used for safety reasons No information available. 5.2. Special hazards arising from the substance or mixture Flammable. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Vapors may form explosive mixtures with air. Do not allow run-off from fire-fighting to enter drains or water courses. Hazardous Combustion Products Carbon monoxide (CO), Carbon dioxide (CO2), Phosgene, Hydrogen chloride gas. 5.3. Advice for firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation. Wear protective gloves/clothing and eye/face protection. Remove all sources of ignition. Take precautionary measures against static discharges. Avoid contact with skin, eyes or clothing. 6.2. Environmental precautions Do not flush into surface water or sanitary sewer system. Do not allow material to contaminate ground water system. Prevent product from entering drains. Local authorities should be advised if significant spillages cannot be contained. 6.3. Methods and material for containment and cleaning up Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Provide adequate ventilation. 6.4. Reference to other sections Refer to protective measures listed in Sections 8 and 13. SECTION 7: HANDLING AND STORAGE 7.1. Precautions for safe handling ______________________________________________________________________________________________ ACR10291 Page 4 / 12 SAFETY DATA SHEET Allyl chloride, stabilized Revision Date 10-Dec-2020 ______________________________________________________________________________________________ Ensure adequate ventilation. Wear personal protective equipment/face protection. Do not breathe mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Handle product only in closed system or provide appropriate exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Use only non-sparking tools. Remove all sources of ignition. Take precautionary measures against static discharges. Keep away from open flames, hot surfaces and sources of ignition. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Hygiene Measures Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work. 7.2. Conditions for safe storage, including any incompatibilities Flammables area. Keep away from heat, sparks and flame. Keep container tightly closed in a dry and
Load more

Recommended publications
  • Material Safety Data Sheet Allyl Chloride MSDS
    He a lt h 2 3 Fire 3 1 3 Re a c t iv it y 0 Pe rs o n a l Pro t e c t io n H Material Safety Data Sheet Allyl Chloride MSDS Section 1: Chemical Product and Company Identification Product Name: Allyl Chloride Contact Information: Catalog Codes: 10058 Finar Limited 184-186/P, Chacharwadi Vasna, CAS#: 107-05-1 Sarkhej-Bavla Highway, Ta.: Sanand, Dist.: Ahmedabad, RTECS: UC7350000 Email: [email protected] TSCA: TSCA 8(b) inventory: Allyl Chloride Web: www.finarchemicals.com CI#: Not available. Synonym: 3-Chloropropene; 3-Chloroprene Chemical Name: Allyl Chloride Chemical Formula: Not available. Section 2: Composition and Information on Ingredients Composition: Name CAS # % by Weight Allyl Chloride 107-05-1 100 Toxicological Data on Ingredients: Allyl Chloride: ORAL (LD50): Acute: 460 mg/kg [Rat]. 425 mg/kg [Mouse]. DERMAL (LD50): Acute: 2066 mg/kg [Rabbit]. VAPOR (LC50): Acute: 11000 mg/m 2 hours [Rat]. 5800 mg/m 3 2 hours [Guinea pig]. Section 3: Hazards Identification Potential Acute Health Effects: Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (permeator). Severe over-exposure can result in death. Potential Chronic Health Effects: CARCINOGENIC EFFECTS: Classified A3 (Proven for animal.) by ACGIH, 3 (Equivocal evidence.) by NTP, C (Possible for human.) by EPA. Classified None. by OSHA, None. by NIOSH. 3 (Not classifiable for human.) by IARC. MUTAGENIC EFFECTS: Mutagenic for bacteria and/or yeast. TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. The substance may be toxic to kidneys, lungs, liver, upper respiratory tract, skin, eyes.
    [Show full text]
  • Increasing the Production of 3-Chloro-1-Propene (Allyl Chloride) in Unit 600
    Increasing the Production of 3-Chloro-1-Propene (Allyl Chloride) in Unit 600 Background You are currently employed by the TBWS Corp. at their Beaumont, Texas plant, and you have been assigned to the allyl chloride facility. A serious situation has developed at the plant, and you have been assigned to assist with troubleshooting the problems which have arisen. Recently your sister plant in Alabama was shut down by the EPA (Environmental Protection Agency) for violations concerning sulfur dioxide emissions from a furnace in their allyl chloride facility. Fortunately, the Beaumont facility had switched to natural gas as a fuel for their process in the early 1990s and, hence, is currently in compliance with the EPA and Texas regulations. However, the loss of the Alabama plant, albeit for a short time only, has put considerable pressure on the Beaumont plant to fulfill contractual obligations to our customers in Alabama for allyl chloride. Thus, part of your assignment is to advise management concerning the increase in production of allyl chloride that can be made at the Beaumont facility. Another related issue which has been discussed by management is the long term profitability of both allyl chloride facilities. Allyl chloride is used as a precursor in the production of allyl alcohol, glycerin, and a variety of other products used in the pharmaceutical industry. More efficient plants have been built recently by our competitors and we are being slowly squeezed out of the market by these rival companies. We still maintain a loyal customer base due to our excellent technical and customer service departments and our aggressive sales staff.
    [Show full text]
  • Cl2-1,5-Hexadiene from Reaction of Allyl Chloride and K2ptcl4
    UC San Diego UC San Diego Previously Published Works Title Unexpected synthesis and structural characterization of Pt(II)Cl2-1,5-hexadiene from reaction of allyl chloride and K2PtCl4 Permalink https://escholarship.org/uc/item/3s82k79p Journal Inorganica Chimica Acta, 364(1) ISSN 00201693 Authors Nair, Reji N Golen, James A Rheingold, Arnold L et al. Publication Date 2010-12-01 DOI 10.1016/j.ica.2010.09.006 Peer reviewed eScholarship.org Powered by the California Digital Library University of California Inorganica Chimica Acta 364 (2010) 272–274 Contents lists available at ScienceDirect Inorganica Chimica Acta journal homepage: www.elsevier.com/locate/ica Note Unexpected synthesis and structural characterization of Pt(II)Cl2-1,5-hexadiene from reaction of allyl chloride and K2PtCl4 ⇑ Reji N. Nair a, James A. Golen b,c, Arnold L. Rheingold b, Douglas B. Grotjahn a, a Department of Chemistry and Biochemistry, 5500 Campanile Drive, San Diego State University, San Diego, CA 92182-1030, United States b Department of Chemistry and Biochemistry, University of California, San Diego, La Jolla, CA 92093-0358, United States c Department of Chemistry and Biochemistry, University of Massachusetts Dartmouth, North Dartmouth, MA 02747, United States article info abstract Article history: An unexpected, new and convenient synthetic procedure for the synthesis of Pt(II)Cl2-1,5-hexadiene is Available online 21 September 2010 reported which is done under mild conditions, including a very short reaction time of 10 min. The com- plex was isolated and crystallized, leading to the first reported crystal structure of the diene complex. Dedicated to Professor Arnold L.
    [Show full text]
  • Separation of a Multicomponent System Formed in the Production of Epichlorohydrin*
    THEORETICAL BASES OF CHEMICAL TECHNOLOGY Separation of a Multicomponent System Formed in the Production of Epichlorohydrin* E.A. Okhlopkova@, L.A. Serafimov, A.V. Frolkova, P.P. Tsekin Moscow Technological University (Institute of Fine Chemical Technologies), Moscow, 119571 Russia @ Corresponding author e-mail: [email protected] Epichlorohydrin is an important product of the basic organic synthesis. One promising direction of epichlorohydrin manufacturing is the liquid-phase epoxidation of allyl chloride with an aqueous solution of hydrogen peroxide in an organic solvent, methanol, in the presence of a heterogeneous catalyst, a titanium-containing zeolite. The multicomponent system of epichlorohydrin production according to this method contains allyl chloride, methanol, water, epichlorohydrin, 3-chloro-1,2-propanediol, 3-chloro-1-methoxypropanol-2 and hydrogen peroxide. In this work the thermodynamic topological analysis of the phase diagram of this multicomponent system of epichlorohydrin production was performed. On the basis of this study a principal technological scheme of separation of the studied system containing five distillation columns and a Florentine vessel was proposed. Keywords: epichlorohydrin, phase equilibrium, mathematical simulation, separation complex. Introduction Epichlorohydrin is an important product of the basic organic synthesis. It is used for producing a number of products that are applied in different industries. Epichlorohydrin contains an active epoxy group and a labile chlorine atom. Due to this it easily enters various reactions of electrophilic and nucleophilic addition and substitution. Paints, glues, ion exchange resins, synthetic fibers and rubbers characterized by high thermal stability and gas-tightness [1] are produced on its basis. About 80% of products based on epichlorohydrin are used for obtaining epoxy resins [2].
    [Show full text]
  • Allyl Chloride
    ENEA0070 - ALLYL CHLORIDE ALLYL CHLORIDE Safety Data Sheet ENEA0070 Date of issue: 06/25/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Physical state : Liquid Substance name : ALLYL CHLORIDE Product code : ENEA0070 Formula : C3H5Cl Synonyms : 3-CHLOROPROPENE; 2-PROPENYL CHLORIDE Chemical family : ESTER 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture : Chemical intermediate For research and industrial use only 1.3. Details of the supplier of the safety data sheet GELEST, INC. 11 East Steel Road Morrisville, PA 19067 USA T 215-547-1015 - F 215-547-2484 - (M-F): 8:00 AM - 5:30 PM EST [email protected] - www.gelest.com 1.4. Emergency telephone number Emergency number : CHEMTREC: 1-800-424-9300 (USA); +1 703-527-3887 (International) SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification (GHS-US) Flam. Liq. 3 H226 Acute Tox. 3 (Oral) H301 Acute Tox. 4 (Inhalation:vapour) H332 Skin Irrit. 2 H315 Eye Irrit. 2A H319 Aquatic Acute 3 H402 Full text of H-phrases: see section 16 2.2. Label elements GHS-US labeling Hazard pictograms (GHS-US) : GHS02 GHS06 GHS07 Signal word (GHS-US) : Danger Hazard statements (GHS-US) : H226 - Flammable liquid and vapor H301 - Toxic if swallowed H315 - Causes skin irritation H319 - Causes serious eye irritation H332 - Harmful if inhaled H402 - Harmful to aquatic life Precautionary statements (GHS-US) : P210 - Keep
    [Show full text]
  • The Production of Epichlorohydrin from Glycerol. a Bachelor Integration Project for Delfzijl’S Chempark
    The production of epichlorohydrin from glycerol. A Bachelor Integration Project for Delfzijl’s Chempark Ruurd Feikes van der Heide University of Groningen Faculty of Science and Engineering IE&M Bachelor Thesis Supervisor 1: prof. Dr. Ir. HJ (Erik) Heeres Supervisor 2: Dr. Ing. H. Kloosterman Syncom supervisor: Dr. Ir. Andre Heeres June 2018 Pelsterstraat 32 9711 KM Groningen (06) 13787270 [email protected] student number 2674122 1 Table of content Introduction (RDP) -Problem context -Stakeholder analysis -System description -Goal statement -Design goal -Scope -Research questions -Cycle choice Abstract Backgrounds -Glycerol -Epichlorohydrin Benchmark -Propylene into epichlorohydrin, via allyl chloride -Allyl chloride to epichlorohydrin -TRL Innovation - Glycerol into epichlorohydrin -Hydrochlorination -Hexanoic acid -Acetic acid -Dehydrochlorination -TRL Cost analysis -Hexanoic acid -Solid oxide Discussion and conclusions References Appendix 2 Problem context The city of Delfzijl (Netherlands) has a chemical park with multiple factories present. The companies at the chemical park have interrelationships with each other which results that if a few of them stop producing products, the other companies will find problems in their own existence. The committee Willems started an investigation how the chemical park should optimize its competitiveness among the business environment nowadays. Willems used to be a high ranked employee of Shell before leaving the company. The committee stated that if the companies on the park want to stay in business, changes within production methods have to be made. A more sustainable production method where green raw materials like biomass are converted into valuable products is the solution to stay competitive. Prof. Dr. Ir.
    [Show full text]
  • Risk Based Design of Allyl Chloride Production Plant Alba Turja*, Micaela Demichela
    Risk Based Design of Allyl Chloride Production Plant Alba Turja*, Micaela Demichela Department of Material Science and Chemical Engineering, SAfeR Research Group, Polytechnic of Turin C.so Duca degli Abruzzi, 24 10129 Turin [email protected] The necessity to identify and quantify the risks for men and the environment, but also the excessive consumption of resources and energy related to the process plants has led to the formulation of analytical methods capable of assessing the reliability and availability of these systems in order to optimize their operation. Integrated Dynamic Decision Analysis (I.D.D.A.), in particular, represents a tool for the logic modeling of the process plants based on “dynamic” event trees able to describe the system both as “logic” concatenation of events and “probabilistic” coherence. This approach was used for reviewing the design of a plant for the production of allyl chloride by chlorination of propylene in exothermic conditions. This paper aims at building an objective and documented reference for the decision making about the design altrenatives to be adopted for risk minimization. 1. Introduction In order to have guarantees of consistency and completeness in a risk assessment used as a basis for a proper plant design, the probabilistic model of the system should be completed with a phenomenological interface of the process. This approach was used for reviewing the design of a plant for the production of allyl chloride by chlorination of propylene in exothermic conditions. The allyl chloride is product by the chlorination of propylene at high temperature: CH2=CH-CH3 + Cl2 CH2=CH-CH2Cl + HCl (1) r1= 3301562 exp (-15118/RT) p p ; reaction velocity [kmole /h m³] C3 H 6 Cl2 Cl2 ,reacted CH2=CH-CH3 + Cl2 CH2Cl-CHCl-CH3 (2) r2= 185,5 exp (-13811/RT) p p ; reaction velocity [kmole /h m³] C3 H 6 Cl2 Cl2 ,reacted At these temperatures (300-600°C), the chlorination occurs through a radical mechanism where the hydrogen atom in allylic position is replaced preferentially by chlorine giving rise to allyl chloride.
    [Show full text]
  • Production of Allyl Chloride
    PRODUCTION OF ALLYL CHLORIDE Chaitanya Bolke, Hrushikesh Kandale, Sumit Dekate and Dr. C. Ravi Kumar Department of Chemical Engineering, Visvesvaraya National Institute of Technology, Nagpur, Maharashtra, 440010 Introduction: Allyl chloride is produced by the thermal chlorination of propylene at elevated temperatures and relatively low pressures. Allyl chloride is used as a precursor in the production of allyl alcohol, glycerin, and a variety of other products used in the pharmaceutical industry. Reactions: Main Reaction: C3H6 + Cl2 C3H5Cl + HCl ∆H298K = -112KJ/mole Allyl Chloride Side Reactions: C3H6 + Cl2 C3H5Cl + HCl ∆H298K = -121KJ/mole 2-Chloropropene C3H6 + 2Cl2 C3H4Cl2 + 2HCl ∆H298K = -222KJ/mole Dichloropropene C3H6 + 3Cl2 3C + 6HCl ∆H298K = -306KJ/mole Carbon Assumptions: • All reactions are considered as conversion reactions. • Heat exchanger is used instead of boiler, since there is no provision of boiler in DWSIM. • Heater is used in place of fired heater, since there is no provision of fired heater in DWSIM. Process Description: • The propylene feed (Stream 1) is heated in Propylene Heater and brought up to a temperature of 545℃. • The chlorine (Stream 2) is mixed with the hot propylene in a Jet Mixer and then the mixed reactant stream (Stream 3) at 511℃ is fed to the Reactor. • The reaction is isothermic in nature, thus Stream 4 is at 511℃. • The gases leaving the reactor (Stream 4) contain unreacted propylene along with the reaction products like allyl chloride, chloropropene and di-chloropropene. • These hot gases (Stream 4) are cooled in a waste-heat boiler (Boiler) using Boiler Feed Water at 90℃ and the outlet stream (MSTR-019) at 200℃ leaves the waste-heat boiler.
    [Show full text]
  • 1-Propene, 3-Chloro
    1-Propene, 3-chloro- Other names: 1-Chloro-2-propene; 1-Chloropropene-2; 1-Propene, 3-chloro-; 2-Propenyl chloride; 3-Chloro-1-propene; 3-Chloro-1-propylene; 3-Chloropropene; 3-Chloropropene-1; 3-Chloropropylene; 3-Chlorpropen; 3-chloropropene (allyl chloride); Allile(cloruro di); Allylchlorid; Allyle(chlorure d'); CH2=CHCH2Cl; Chlorallylene; Chloroallylene; NCI-C04615; NSC 20939; Propene, 3-chloro-; UN 1100; «alpha»-Chloropropylene. InChI: InChI=1S/C3H5Cl/c1-2-3-4/h2H,1,3H2 InChI Key: OSDWBNJEKMUWAV-UHFFFAOYSA-N Formula: C3H5Cl SMILES: C=CCCl Molecular Weight: 76.53 CAS: 107-05-1 Physical Properties Property Value Unit Source ∆ G° 50.29 kJ/mol Joback Method f ∆ H° -5.60 NIST Webbook f gas kJ/mol ∆ H° 6.44 Joback Method fus kJ/mol ∆ H° 29.90 NIST Webbook vap kJ/mol IE 10.05 ± 0.01 eV NIST Webbook IE 10.05 eV NIST Webbook IE 9.90 eV NIST Webbook IE 10.04 ± 0.01 eV NIST Webbook IE 10.05 eV NIST Webbook IE 10.05 eV NIST Webbook IE 10.34 eV NIST Webbook IE 10.20 eV NIST Webbook IE 10.34 eV NIST Webbook logP 1.41 Crippen Method oct/wat P 4438.52 Joback Method c kPa T 318.20 NIST Webbook boil K Property Value Unit Source T 318.00 NIST Webbook boil K T 318.30 ± 0.40 NIST Webbook boil K T 318.30 ± 0.30 NIST Webbook boil K T 318.15 ± 0.30 NIST Webbook boil K T 317.45 ± 0.50 NIST Webbook boil K T 318.30 ± 0.30 NIST Webbook boil K T 318.30 ± 0.50 NIST Webbook boil K T 318.25 ± 0.20 NIST Webbook boil K T 318.90 ± 0.50 NIST Webbook boil K T 317.75 ± 0.30 NIST Webbook boil K T 318.60 ± 0.50 NIST Webbook boil K T 477.44 Joback Method c K T 138.65 ± 0.50
    [Show full text]
  • United States Patent Office Patented Sept
    3,833,677 United States Patent Office Patented Sept. 3, 1974 1. 2 3,833,677 in which Q represents a -CH=CH-, -CH=N-, PROCESS FOR THE PREPARATION OF SUBST -NH-, -S-, or -O-group; n1 is a whole number TUTED AROMATIC COMPOUNDS Charles Grard, Lyon, France, assignor to Rhone from 1 to 6 and n is 0 or a whole number from 1 to 5 Poulenc S.A., Paris, France (n not being greater than the total number of carbon No Drawing. Filed Feb. 25, 1970, Ser. No. 14,222 atoms in the aromatic ring and n2 being lower than the Claims priority, application France, Feb. 27, 1969, total number of carbon atoms in the aromatic ring); R1 690518S represents an aliphatic, cycloaliphatic or araliphatic hy nt. C. C07c 15/00 drocarbyl radical or an acyl radical each of which may U.S. C. 260-668 R 11. Claims be substituted by halogen (e.g. chlorine or bromine), or a O functional group such as nitrile, amino, nitro, nitroso, ABSTRACT OF THE DISCLOSURE amide, aldehyde, ketone, ester, ether, or a heterocyclic radical; R2 represents a radical which may be identical Friedel-Crafts-type condensation may be effected by with R1 or may be aryl, chlorine, bromine, hydroxyl, utilising, as catalyst, a derivative of ruthenium, rhodium, nitrile, nitro, nitroso, aldehyde, ether, or amine, or a hy osmium, or iridium, particularly a halide or halonitrile 5 drocarbon chain, which may be interrupted by one or complex, which catalyst may be used in conjunction with a more hetero atoms, forming a benzene or heterocyclic Brönsted acid catalyst.
    [Show full text]
  • Toxic Chemical Vapor Cloud Release
    U.S. CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD INVESTIGATION REPORT TOXIC CHEMICAL VAPOR CLOUD RELEASE (154 Treated, Five Hospitalized for Toxic Chemical Exposure) MFG CHEMICAL, INC. DALTON, GEORGIA APRIL 12, 2004 KEY ISSUES: • REACTIVE CHEMICALS PROCESS DESIGN • PROCESS SCALE-UP • EMERGENCY PLANNING AND RESPONSE REPORT NO. 2004-09-I-GA APRIL 2006 April 2006 Abstract This report examines a toxic chemical release. On April 12, 2004, a runaway chemical reaction during the production of triallyl cyanurate at MFG Chemical, Inc. (MFG) in Dalton, Georgia, released highly toxic and flammable allyl alcohol and toxic allyl chloride into the nearby community, forcing the evacuation of more than 200 families. One worker received chemical burns and 154 people, including 15 police and ambulance personnel, required decontamination and treatment for chemical exposure. This report makes recommendations to the companies involved in the incident, as well as the local, county, and state agencies in charge of preparing emergency responses to chemical releases. The U.S. Chemical Safety and Hazard Investigation Board (CSB) is an independent Federal agency whose mission is to ensure the safety of workers and the public by preventing or minimizing the effects of chemical incidents. The CSB is scientific investigative organization; it is not an enforcement or regulatory body. Established by the Clean Air Act Amendments of 1990, the CSB is responsible for determining the root and contributing causes of accidents, issuing safety recommendations, studying chemical safety issues, and evaluating the effectiveness of other government agencies involved in chemical safety. No part of the conclusions, findings, or recommendations of the CSB relating to any chemical incident may be admitted in evidence or used in any action or suit for damages arising out of any matter mentioned in an investigation report (see 42 U.S.C.
    [Show full text]
  • Epichlorohydrin
    J. Cleaner Prod., Vol. 2. Na. 3-4, pp. 181-184, 1W4 Elccvicr Scicncc Lid Prinicd in Greai Briiitin 0959-6526(95)00024-0 W59-6526194 $10.00 -+ 0.00 Clean technology in the production of epichlorohydrin Jowi W. Bijsterbosch, A. Das+ and F.P.J.M. Kerkhof* RIZA, Institute for Inland Water Management and Waste Water ïreatment, Ministry of Transport, Public Works and Water Management, PO Box 17, 8200 AA Lelystad, The Netherlands *Comprimo Consulting Services, PO Box 58026, 7040 HA Amsterdam, The Netherlands The conventional production of epichlorohydrin takes place via allyl chloride and dichlorohydrin. A major disadvantage of this chemica1 process is the formation of a large amount of chiorinated organic by-products, which are found panially in the voiuminous effluent. In order to reduce thic emicsion to surface water, measures have to be taken. Technica( measures varying from end-of-pipe techniques to alternative processes have been evaluated. Application of end-of- pipe techniques is not the optimal solution for emission reduction, either technically or economically. Results from in-proces measures focused on reduction of the amount of waste water and contaminants are more promising. However, the development of an alternative route is necessary in order to obtain a process with minimal emiscions and minimal costs. Keywords: clean technology; epìchlorohydrin; chemica1 industry Introduction water treatment facilities. However, the EOCI reduction obtained is considered to be insufficient In the early 19SOs, the first industrial production of from an environmental point of view. epichlorohydrin (ECH) took place. Nowadays, therc Within the frlimework of the Dutch government are about 20 production locations worldwide at which programme SPA (focused on pollution prevention, ECH is produced by the conventional route starting clean technoiogy and advanced waste water treatment) , with propenc and chlorine via allyl chloride (AC) and u project has been set up by RIZA (Tnstitute for Inland dichlorohydrin (DCH) to ECH.
    [Show full text]