DOCSLIB.ORG

100 Instant Trade-In

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
100 Instant Trade-In ELECTRICAL PROMOTIONS FEBRUARY 1, 2020 - APRIL 30, 2020 $100 INSTANT TRADE-IN RECEIVE $100 OFF INSTANTLY WHEN YOU BUY A QUALIFYING M18 FUEL™ KIT AND TRADE-IN A PROFESSIONAL GRADE CORDLESS TOOL AND 2 BATTERIES QUALIFYING M18 FUEL™ KITS WAS $349 WAS $299 WAS $379 NOW $249 NOW $199 NOW $279 AFTER TRADE-IN AFTER TRADE-IN AFTER TRADE-IN M18 FUEL™ 3/8” ™ ™ ™ Compact Impact M18 FUEL 1/4” M18 FUEL w/ ONE-KEY Wrench w/ Friction Ring Hex Impact Driver Kit 1/2" Compact Impact Wrench Kit (2853-22) w/ Pin Detent Kit (2759-22) (2754-22) WAS $399 WAS $299 WAS $449 NOW $299 NOW $199 NOW $349 AFTER TRADE-IN AFTER TRADE-IN AFTER TRADE-IN M18 FUEL™ 2-Tool Combo Kit: M18 FUEL™ 1/2” M18 FUEL™ 1/2” Hammer Drill Hammer Drill/Driver Kit High Torque Impact Wrench & Impact Driver (2997-22) (2804-22) w/ Friction Ring (2767-22) IMPACT WRENCHES DRILLS & IMPACT DRIVERS REG. TRADE-IN REG. TRADE-IN MET # DESCRIPTION PRICE PRICE MET # DESCRIPTION PRICE PRICE 2754-22 M18 FUEL™ 3/8” Compact Impact Wrench w/ Friction Ring Kit $349.00 $249.00 2803-22 M18 FUEL™ 1/2” Drill/Driver Kit $279.00 $179.00 2755-22 M18 FUEL™ 1/2” Compact Impact Wrench w/ Pin Detent Kit $349.00 $249.00 2804-22 M18 FUEL™ 1/2” Hammer Drill/Driver Kit $299.00 $199.00 2755B-22 M18 FUEL™ 1/2” Compact Impact Wrench w/ Friction Ring Kit $349.00 $249.00 2853-22 M18 FUEL™ 1/4” Hex Impact Driver Kit $299.00 $199.00 2758-22 M18 FUEL™ 3/8” Compact Impact Wrench w/ Friction Ring Kit w/ ONE-KEY™ $399.00 $299.00 2760-22 M18 FUEL™ SURGE™ 1/4” Hex Hydraulic Driver Kit $329.00 $229.00 2759-22 M18 FUEL™ 1/2” Compact Impact Wrench w/ Pin Detent Kit w/ ONE-KEY™ $379.00 $279.00 2805-22 M18 FUEL™ 1/2” Drill/Driver Kit w/ ONE-KEY™ $329.00 $229.00 2759B-22 M18 FUEL™ 1/2” Compact Impact Wrench w/ Friction Ring Kit w/ ONE-KEY™ $399.00 $299.00 2806-22 M18 FUEL™ 1/2” Hammer Drill/Driver Kit w/ ONE-KEY™ $349.00 $249.00 2852-22 M18 FUEL™ 3/8” Mid-Torque Impact Wrench w/ Friction Ring Kit $399.00 $299.00 2857-22 M18 FUEL™ 1/4” Hex Impact Driver Kit w/ ONE-KEY™ $349.00 $249.00 2861-22 M18 FUEL™ 1/2” Mid-Torque Impact Wrench w/ Friction Ring Kit $399.00 $299.00 2866-22 M18 FUEL™ Drywall Screw Gun Kit $299.00 $199.00 2860-22 M18 FUEL™ 1/2” Mid-Torque Impact Wrench w/ Pin Detent Kit $399.00 $299.00 COMBO KITS 2766-22 M18 FUEL™ High Torque 1/2” Impact Wrench w/ Pin Detent Kit $449.00 $349.00 ™ REG. TRADE-IN 2767-22 M18 FUEL High Torque 1/2” Impact Wrench w/ Friction Ring Kit $449.00 $349.00 MET # DESCRIPTION PRICE PRICE ™ ™ 2862-22 M18 FUEL High Torque 1/2” Impact Wrench w/ Pin Detent Kit w/ ONE-KEY $499.00 $399.00 2997-22 M18 FUEL™ 2-Tool Hammer Drill & Impact Driver Combo Kit $399.00 $299.00 ™ ™ 2863-22 M18 FUEL High Torque 1/2” Impact Wrench w/ Friction Ring Kit w/ ONE-KEY $499.00 $399.00 2996-22 M18 FUEL™ 2-Tool Hammer Drill & Impact Driver Combo Kit w/ ONE-KEY™ $449.00 $349.00 ™ ™ 2864-22 M18 FUEL 3/4” High Torque Impact Wrench w/ Friction Ring Kit w/ ONE-KEY $529.00 $429.00 2999-22 M18 FUEL™ 2-Tool Hammer Drill & Surge Hex Hydraulic Impact Driver Combo Kit $429.00 $329.00 2769-22 M18 FUEL™ 1/2” Ext. Anvil Controlled Torque Impact Wrench Kit w/ ONE-KEYv $549.00 $449.00 2896-22 M18 FUEL™ 2-Tool Drywall Screw Gun & Surge Hex Hydraulic Impact Driver Combo Kit $399.00 $299.00 2865-22 M18 FUEL™ 7/16” Hex High Torque Impact Wrench Kit w/ ONE-KEY™ $579.00 $479.00 2997-23 M18 FUEL™ 3-Tool Combo Kit $549.00 $449.00 2997-25 M18 FUEL™ 5-Tool Combo Kit $749.00 $649.00 2997-27 M18 FUEL™ 7-Tool Combo Kit $999.00 $899.00 MT20-3330-PE P1 ELECTRICAL P1 MT20-3330-PE OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020. ALL ITEMS MAY NOT BE IN STOCK. PLEASE SEE COUNTER ASSOCIATE FOR DETAILS. WHILE SUPPLIES LAST. FREE WHEN YOU PURCHASE A SELECT INSTANT M18™ REDLITHIUM™ XC5.0 Battery Pack (48-11-1850) $129 Value BARE TOOL $249 $ $ $ 139 159 139 M18 FUEL™ High ™ M18 FUEL™ M18 FUEL™ 1/2” M18 FUEL 1/4” Torque 1/2” Impact 1/2” Drill/Driver Hammer Drill/Driver Hex Impact Driver Wrench w/ Friction - Tool Only (2803-20) - Tool Only (2804-20) - Tool Onlyl (2853-20) Ring - Tool Only (2767-20) $189 $ $ $ M18 FUEL™ 3/8” 169 199 259 Compact Impact M18 FUEL™ M18 FUEL™ SAWZALL® M18 FUEL™ SAWZALL® Wrench w/ Friction HACKZALL® Reciprocating Saw Reciprocating Saw w/ ONE- Ring - Tool Only (2754-20) - Tool Only (2719-20) - Tool Only (2720-20) KEY™ - Tool Only (2721-20) $ 189 $219 $219 $179 M18 FUEL™ M18 FUEL™ M18 FUEL™ M18 FUEL™ 1/2" Compact 6-1/2” Circular Metal Cutting 4-1/2” / 5” Grinder, Impact Wrench w/ Saw - Tool Only Circular Saw Paddle Switch No-Lock Pin Detent - Tool (2730-20) - Tool Only (2782-20) - Tool Only (2780-20) Only (2755-20) YOUR CHOICE M18 FUEL™ M18™ ™ M18 FUEL M18 FUEL™ 3/8” Compact REDLITHIUM™ 1/2” Hammer 1/4” Hex Impact Impact Wrench w/ XC5.0 Extended Drill/Driver - Tool Driver - Tool Only Friction Ring - Tool Capacity Battery FREE Only (2804-20) (2853-20) Only (2754-20) BARE TOOL OR BATTERY Pack (48-11-1850) INSTANT $159 Value! $139 Value! $189 Value! $129 Value! WHEN YOU PURCHASE $469 $2,629 M18 FUEL™ 1-1/2” ™ ® A QUALIFYING M18 FUEL HOLE HAWG 1/2” Magnetic Drill High Right Angle Drill Kit (2707-22) ™ Demand Kit (2787-22HD) ™ $ KIT w/ QUIK-LOK (2708-22) ......... 449 Lineman (2788-22HD) ............. $2,729 $429 M18 FUEL™ 4-1/2” / 5” Grinder, Paddle Switch $499 No-Lock Kit w/ 2 Batteries (2780-22) M18 FUEL™ Deep Cut $419 w/2 Batteries (2781-22) .............................. $429 Band Saw Kit (2729-21) M18 FUEL™ SAWZALL® Reciprocating Saw Kit (2720-22) Braking Grinder (2783-22) ........................ $479 w/ 2 Batteries (2729-22) ... $599 OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020. ALL ITEMS MAY NOT BE IN STOCK. PLEASE SEE COUNTER ASSOCIATE FOR DETAILS. WHILE SUPPLIES LAST. OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020. ALL ITEMS MAY NOT BE IN STOCK. PLEASE SEE COUNTER ASSOCIATE FOR DETAILS. WHILE SUPPLIES LAST. WHEN YOU PURCHASE A SELECT PURCHASE A SELECT RECEIVE HIGH OUTPUT ™ 50% MORE POWER & RUNS COOLER FREE VS REDLITHIUM™ M18™ REDLITHIUM HIGH OUTPUT™ XC8.0 Battery (48-11-1880) BARE TOOL $ 199 Value INSTANT $249 $249 $349 ™ M18 FUEL SUPER M18 FUEL™ 7-1/4” M18 FUEL™ Deep ® SAWZALL Reciprocating Circular Saw Cut Band Saw - Saw - Tool Only (2722-20) - Tool Only (2732-20) Tool Only (2729-20) $299 $399 $749 M18 FUEL™ M18 FUEL™ M18 FUEL™ 1-3/4” 1” SDS Plus 1-1/8” SDS Plus SDS Max Rotary Rotary Hammer Rotary Hammer Hammer w/ ONE KEY™ - Tool Only (2712-20) - Tool Only (2715-20) - Tool Only (2718-20) * FULL LIST OF QUALIFYING M18 FUEL KITS ON TEAR PAD YOUR CHOICE M18 FUEL™ M18 FUEL™ M18 FUEL™ 4-1/2” / 5” Grinder, Paddle Switch 4-1/2” / 5” Grinder, Slide Switch 4-1/2” / 5” Braking No-Lock - Tool Only (2780-20) Lock-On - Tool Only (2781-20) Grinder - Tool Only (2783-20) FREE $ $ $ INSTANT 219 Value 219 Value 229 Value WHEN YOU PURCHASE A SELECT M18 FUEL™ ROTARY HAMMER KIT $529 $649 $749 ™ M18 FUEL 1” SDS Plus M18 FUEL™ 1” SDS Plus M18 FUEL™ Rotary Hammer Kit (2712-22) Rotary Hammer w/ Dust 1-1/8” SDS Plus Rotary High Demand™ (2712-22HD) .........$679 Extraction Kit (2712-22DE) Hammer w/ DE Kit (2715-22DE) PURCHASE A SELECT YOUR CHOICE FREE SDS MAX ROTARY HAMMER INSTANT OR $ $ 679 899 M18 Fuel™ 4-1/2” / 5” M18 FUEL™ 4-1/2” / 5” M18 FUEL™ 1-9/16” SDS M18 FUEL™ 1-3/4” SDS MAX Rotary Grinder, Paddle Switch Grinder, Slide Switch Max Hammer Drill Kit (2717-21HD) Hammer Kit w/ 12.0 Battery (2718-21HD) No-Lock Kit (2780-21) Lock-On Kit (2781-21) $ (2717-22HD) ...................................$799 w/ (2) 12.0 Battery (2718-22HD) ..... $999 319 Value OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020. ALL ITEMS MAY NOT BE IN STOCK. PLEASE SEE COUNTER ASSOCIATE FOR DETAILS. WHILE SUPPLIES LAST. OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020. ALL ITEMS MAY NOT BE IN STOCK. PLEASE SEE COUNTER ASSOCIATE FOR DETAILS. WHILE SUPPLIES LAST. BUY THIS RECEIVE THIS FREE INSTANT M18™ FORCE LOGIC™ 750 MCM Crimper Kit M18™ FORCE LOGIC™ Cable Cutter Kit (2672-21) AL (2779-750A) ................$5449 $ CU (2779-750C)................$5449 1699 Value BUY ONE RECEIVE ONE OF THESE OF THESE FREE INSTANT $3199 M18™ FORCE LOGIC™ 350 MCM AL Crimper Kit (2679-350A) OR OR $329925 750 MCM Cu/Al Crimping Jaw 750 MCM Cu/Al Crimping M18™ FORCE LOGIC™ w/ 750 MCM Cu 6T U-Style Die Jaw with 400-750 MCM Al 6T 600 MCM CU (49-16-750C) U-Style Dies (49-16-750A) Crimper Kit (2679-600C) $749 Value $999 Value M18™ FORCE LOGIC™ BUY ONE OF THESE 6T UTILITY CRIMPER KITS RECEIVE THIS FREE INSTANT $ $ $ $ 2299 2299 2299 2299 USB Rechargeable M18™ FORCE LOGIC™ M18™ FORCE LOGIC™ M18™ FORCE LOGIC™ 6T M18™ FORCE LOGIC™ BEACON™ Hard Hat Light 6T Utility Crimper 6T Utility Crimper Kit Utility Crimper Kit with 6T Utility Crimper Kit (2116-21) Kit with D3 Grooves with D3 Grooves Fixed D3 Grooves Kearney with D3 Grooves $ “Snub Nose” (2678-22) BG Die (2678-22BG) Grooves (2678-22K) Fixed O Die (2678-22O) 99 Value BUY THIS RECEIVE THIS $1599 FREE M18 FUEL™ INSTANT 1/2” Hammer ™ ™ M18 FORCE LOGIC Drill/Driver 10T Knockout Tool - Tool Only (2804-20) 1/2” - 4” Kit (2677-23) $159 Value BUY THIS RECEIVE A + $2199 M18 FUEL™ FREE 1/2” Hammer ™ M18™ FORCE LOGIC™ Drill/Driver M18 ™ 6T Knockout 1/2”- 4” GOODS PACKAGE - Tool Only REDLITHIUM XC5.0 Battery Pack (48-11-1850) Kit (2676-23) INSTANT (2804-20) $288 Value OFFERS VALID FEBRUARY 1, 2020 - APRIL 30, 2020.
Load more

Recommended publications
  • Fish Tapes, Accessories & Conduit Tools
    FISH TAPES, ACCESSORIES & CONDUIT TOOLS Innovative, high quality solutions for wire pulling and conduit bending PULL FISH BEND For Professionals...Since 1857® 49’ 50’ ! INTRODUCING Exclusive PENDING Laser-Etched Fiberglass Fish Tapes Laser-Etched MarkingsPATENT Unique sloped handle optimizes the position of your hand for quick hand-over-hand rewinds and allows a more level tape payout. 7 Raised fingergrips NON-CONDUCTIVE PERMANENT 1' MARKINGS DURABLE LEADER 5 8 help transfer 100% of the 1 winding power from your hand and fingers. E The Advantages of C N Laser-Etched Markings I S Polypropylene case • Laser-etched in 1' increments allowing and handle are extremely you to more accurately measure the S durable and offer the maximum depth of conduit runs. L in shock and impact resistance. O • Descending markings let you know right away how much tape is left to pay out. O T • Laser-etched markings are permanent. Y They won’t rub or scratch off. T FISH TAPES, ACCESSORIES & CONDUIT TOOLS CONDUIT & ACCESSORIES TAPES, FISH I The round inner ring design L provides a smooth, consistent A and comfortable surface for U winding and rewinding. Q All dimensions are in inches and (millimeters) unless otherwise specified. WARNING: Do NOT use any fish tape on or near live circuits. WARNING: Wear approved eye protection when feeding, pulling or rewind- Use extreme caution when working near any electrical equipment. ing fish tape. Laser-etched markings are also available WARNING: Use on a safeKlein work® positionSteel toFish avoid Tapes. loss of balance when using fish tape. 2 WARNING: Never remove screws while fish tape is coiled inside reel.
    [Show full text]
  • P-5505 Popular Grounding Products.Indd
    POPULAR GROUNDING PRODUCTS FOR ELECTRICAL TRADESMEN grounding products Meet the requirements of today’s electrical code with popular grounding products from IDEAL. GROUNDING TAILS 9-IN-1 RATCH-A-NUT™ SCREWDRIVER • Patented Wire Connector Wrench accepts a wide variety of connectors and reduces finger fatigue • Pro-quality, 28 tooth, all metal ratchet can • Ensures compliance with Article 250 of the handle 225 lbs. of National Electrical Code torque without failure • Ultra-flexible lead wire and bonding jumpers • Ergonomic, slip-free textured grip provides excellent make for fast and efficient pigtailing torque and is impervious to perspiration, gas, oil and • Thread-forming, hole finding grounding screw chemicals • Stranded tail SKUs feature heavy-duty fork terminal to easily • Bits included: 1/4 in. Slotted, 3/16 in. Slotted, attach to device grounding screw #1 Phillips, #2 Phillips, 1/4 in. Nutdriver, 5/16 in. Nutdriver and 7/16 in. Nutdriver Solid Wire Grounding Tails Qty./Pkg. Part No. • Replacement bits available 12 AWG solid, 6.5" tail w/loop & Box of 50 30-3404 ground screw and stripped end Description Part No. 12 AWG solid, 8 in. tail w/loop & Box of 50 30-3392 9-in-1 Ratch-a-Nut™ Screwdriver ground screw and stripped end 35-988 12 AWG solid, 8 in. tail w/loop & Plastic Box 30-3399 ground screw and stripped end of 100 COMBO HEAD™ CUSHIONED- 12 AWG solid, 10 in. tail w/loop & GRIP SCREWDRIVER Bag of 50 30-3410 ground screw and stripped end • Designed to accurately and 12 AWG stranded, 8 in. tail w/#10 securely fit most Bag of 25 30-3184 fork & #10 ring and ground screw fasteners • Patented design ensures full fastener GROUNDING SCREWS engagement • Zinc-plated grounding screws offer a thread-forming, hole-finding feature Blade Handle Overall Part plus combination hex, Phillips, Slotted Description and Robertson head Length Length Length No.
    [Show full text]
  • Call GUS!GUS! 1-800-245-83391-800-245-8339 Order U N Online D Today! E R D Georgiaunderground.Net G R O U N
    AerialAerial InstallationInstallation Aerial Hardware | Strand and Wire | Cable Lashers | Drills | Fall Protection Buckets, Pouches, Trays and Aprons | Aerial Hand Tools | Lay-up Sticks, Wire Lifters and Height Sticks | Blocks, Guides and Swivels | Cable Benders Pullers | Reel Stands | Ladders Pulling Cable Grips | Swivels O R G I A G E CallCall GUS!GUS! 1-800-245-83391-800-245-8339 Order U N Online D Today! E R D georgiaunderground.net G R O U N version 07.07.19 Table of Contents Aerial Hardware ..................................................................4 Strand and Wire .................................................................10 Cable Lashers and Drills. 11 Lay-up Sticks, Wire Lifters and Height Sticks ........................................11 Fall Protection ..................................................................12 Buckets, Pouches, Trays and Aprons ...............................................13 Aerial Hand Tools ...............................................................14 Blocks and Guides ..............................................................20 Cable Benders, Pullers, Reel Stands and Ladders ....................................22 Pulling Cable Grips and Swivels ...................................................23 3 Aerial Hardware Bell Spacers Weaver K-1 Stainless Steep Strandvises Bonding Clamp Straps AED 100-0016-02 1/2” AED 2125 AED 34-08912 10” AED 5100 AED 100-0016-02 3/4” AED 34-08922 16” Screw Anchors Band Mounting Square Nuts Square Washers Plates AED 6526WCA 6” Helix, AED D-510
    [Show full text]
  • Operation and Safety Instruction Manual
    OPERATION AND SAFETY INSTRUCTION MANUAL Models: 8-18-50 8-18-50K* 8-18-100 8-18-100K* 8-18-150 8-18-150K* *Includes Accessory Kit Attached To Canister Wee Buddy® With Accessory Kit Wee Buddy® Without Accessory Kit Read and understand these operating and safety instructions before using or servicing this equip- ment. Failure to follow instructions could result in an accident causing serious injury. Do not allow chil- dren or untrained personnel to use this equipment. Follow your company installation procedures. General Information The Wee Buddy® fiberglass fish tape features a highly visible, non-conductive fiberglass fish tape made of a solid fiberglass core rod with a protective polymer jacket (1/8” total outside diameter). This lightweight and compact unit is ideal for all general conduit fishing. Available with or without accessory kit. SAFETY FIRST WARNING Do not use on live circuits. Electric shock may result. The Buddy® is equipped with a metal tip. Do not use on or near live circuits. Electric shock may occur. Disconnect power. • The minimum bending radius of Wee Buddy® fish tape is 1.5”. Do not attempt to bend the tape beyond the recommended radius. • Keep secure footing. Protect yourself from the possibility of falling should the pulling eye move suddenly or separate from fish tape. • Check for damage prior to using fish tape. Cracks, gouges, nicks, white stress marks on jacket or sharp bends will weaken fish tape. Injury could result if tape breaks while being pulled. • Do not use slip joint pliers, locking pliers or powered pulling equipment on fish tape.
    [Show full text]
  • Essential Tools for Contractors
    2016 CONTRACTOR RESOURCE ESSENTIAL PRODUCTS FOR CONTRACTORS Insulated Tools Holemaking Test & Measurement Safety Equipment Cable & Bolt Cutters Wire Pulling & Conduit Tools Power Tool Accessories Work @ Height Pliers Torque Wrenches / Screwdrivers These days, it can be hard to find companies that make TABLE OF CONTENTS products you can count on. But that’s exactly what you’ll get from Pliers with Tether Ring 1 Klein Tools. We don’t just make great products, we make great products Fish Tapes, Lubricants & Accessories 2 that stand up to the demands of the Conduit Benders, Fish Rods & Accessories professionals who use them every day. 3 Because our standards are as high as Low Voltage Wire Pulling yours, we demand that every product we 4 offer delivers all the performance, Holemaking 5 durability and precision that you need to get the job done right. Test & Measurement and Accessories 6-7 And by using only the highest quality Electrical Testers materials, superior workmanship, and 8 keeping our manufacturing as close to Torque Tools 9 home as we can, we’re able uphold those rigorous standards. Power Tool Accessories 10-11 Klein isn’t just the name of our company, Personal Protective Safety Equipment / Gloves it’s also our family name, so we have to 12-14 be proud of everything we make. And Insulated Tools 15-16 since we’re an American company that’s been family-owned and family-run, since Cable Cutters 17 1857, you know you can count on us to be here tomorrow. Bolt Cutters 18 So buy a Klein tool and you’ll know what Reference Guide 19-20 all the professionals know…when you pick up a Klein, it’ll never let you down.
    [Show full text]
  • United Rentals Tool Solutions Catalog
    United Rentals Tool Solutions Catalog UnitedRentals.com | 800.UR.RENTS © 2017 United Rentals, Inc. 38363_UR 2017_00_FC_BC_Tools.indd 1 4/4/17 10:38 AM Tool Solutions Products 38363_UR 2017_00_IFC-IBC.indd 1 4/4/17 3:43 PM TABLE OF CONTENTS Cooling, Ventilation & Vacuum ........... 2-3 Piping................................................. 21-25 Sanders & Grinders................................42 Air Horns .....................................................2 Flange Spreaders......................................24 Angle Grinders & Sanders ........................42 Blowers ................................................... 2-3 Hydrostatic Test Pump Air........................21 Hand Sanders ...........................................42 Cooling Fans...............................................2 Geared Threader.......................................21 Belt Sanders..............................................42 Cooling Trailers ...........................................2 Threading Machines..................................21 Saws .................................................. 43-44 Vacuums .....................................................3 Pit Bull.......................................................22 Reciprocating Saws ..................................43 Rolling Unit................................................22 Air Tools ................................................ 4-7 Band Saws................................................43 Track Unit..................................................22 Texas Pneumatic Ventilation
    [Show full text]
  • Greenlee's Professional Hand Tools Continues to Grow with an Even Larger Collection of Products
    Hand Tools The success of Greenlee's professional hand tools continues to grow with an even larger collection of products. Each Greenlee hand tool is "Made for the Trade" and each kit and accessory has been carefully assembled to meet the demanding requirements of today's professional electrical contractor. Contents Pliers 4 Cutting, Stripping & Crimping 8 Screw & Nut Drivers 11 Wrenches 21 Insulated Drivers 25 Cutting Tools 27 Tape Measures, Levels, Hammers & Flashlights 31 Tool Bags, Pouches, Belts & Work Gloves 34 Tool Kits 40 MADE FOR THE TRADE!™ MADE FOR THE TRADE!™ Pliers High Leverage Side-Cutting Pliers • High leverage pliers design and diamond-serrated jaws for optimum cutting and gripping performance. • Forged from chrome vanadium steel for greater durability and strength. • Precision-machined and laser-hardened blades strengthen cutters and provide consistent performance. • Effectively cuts hardened wire, ACSR, bolts, screws and nails. • Through-hardened steel for longer life. • Exceeds ASME/ANSI specifications. • Rugged riveted construction for smooth precise action. • Lifetime limited warranty. • Note: This is not an insulated tool. 0151-09SM Stripping Only • Stripping hole allows for easy and convenient wire stripping of #12 AWG wire (0151-09SM & 0151-09SD only). • The wire looping hole perfectly forms wire for threaded connections 0151-09SD (0151-09SM & 0151-09SD only). Hand Tools Crimping Only • Crimping die for non-insulated connectors, lugs and terminals. Fish Tape Pulling Only • Pulls 1/8" and 1/4" fish tape. Molded Grip Only • Custom grip allows area for user identification. 0151-09M • Slip-proof, ergonomic molded grips for increased comfort and reduced user fatigue. • Wider grip design provides larger load bearing area.
    [Show full text]
  • Pliers, Clamping, & Cutting
    PLIERS, CLAMPING, & CUTTING TABLE OF CONTENTS XL SERIES PLIERS . 742-743 LOCK JOINT PLIERS . .744 POWER-TRACK® II PLIERS . .745 ASSORTED PLIERS SETS . .746 NEEDLE-NOSE PLIERS . 747-748 CUTTING PLIERS . 749-752. LINEMAN'S PLIERS . 752-753. SPECIALTY PLIERS. 754 MINIATURE PLIERS . 755. LOCKING PLIERS . 756-762. LOCKING C-CLAMPS . 762-765 SAFETY WIRE TWISTERS. 766 WIRE STRIPPERS & CUTTERS . .767 AUTOMOTIVE PLIERS . 768-769. RETAINING RING PLIERS SETS . 770-772 RETAINING RING PLIERS . 773-774 1000V PLIERS . 775-781. HACKSAW . 782. C-CLAMPS . 782-784 EYE BOLTS . 785. SNIPS . 785-787 . MULTI-PURPOSE TOOLS . .787 KNIVES. 788 PROTO® STAINLESS STEEL ELECTRICIAN'S SCISSORS A handy electrician's tool that can accomplish common tasks like stripping, crimping, cutting, and snipping from thin delicate wires to thicker multi-core cables, conveniently locked on the belt until needed. Ergonomic handles with hole for tethering. Built-in wire stripper can strip and crimp for AWG 12, 14 and 16 cables. Stainless steel construction. Includes a holder with a quick release button and a belt clip. Cuts multi- wire cables and snips tiny wires. Micro anti-slip teeth on blades for better cutting grip. SAFETY WIRE PLIERS Safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened. Safety wire is available in a variety of gauges and materials, depending on the application. In aircraft and racing applications, stainless steel wire is used, most commonly in .032" diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored to a second fastener or part, then twisted again.
    [Show full text]
  • Electrical Technology Tool List Hays Campus 2019-2020
    Electrical Technology Tool List Hays Campus 2019-2020 Following are the required tools for the Electrical Technology program. These tools can be purchased from the vendor of your choice. All tools are to be of the finest quality. Tools will be inspected prior to being used in the department. The department reserves the right to refuse the use of worn or defective tools or tools which do not conform to the specifications of this list and the department chairperson. Required Tools and Equipment High Leverage Diagonal Cutting Pliers – Angled Head Wire Striper 10-18 AWG Solid & 12-20 AWG Stranded Utility knife Cable splicer kit 120’ Fish Tape Safety Glasses High Leverage cable cutter Conduit-fitting and Reaming screwdriver 12 piece Hex-Key Set Standard Long nose pliers Heavy duty long nose pliers – side-cutting & stripping 8” adjustable wrench 12” adjustable wrench ¼” stubby screwdriver –flat ¼” – 4”square shank screwdriver – flat 3/16” – 3” round shank screwdriver – flat 3/16” – 6” round shank screwdriver – flat 5/16” – 6” round shank screwdriver – flat #2 Phillip’s screwdriver – stubby #1 Phillip’s – 3” round shank #2 Phillip’s – wire bending 4” round shank 1/4” 6” round shank screwdriver – flat 7 piece nut driver set (3/16”, ¼”, 5/16”, 11/32”, 3/8”, 7/16”, ½”) Scratch awl No.2 square-recess tip screwdriver – round shank 3/16” rapi-drive screwdriver 25’ tape measure Crimping tool Dual NM cable stripper/cutter High leverage side-cutting pliers – fish tape pulling 18 oz hammer Fuse puller Tap tool Electrician’s knife Hacksaw Revised 4-9-19 3/8” – 1” flat bore bits Lockout Hasp/tag Electrical tape Hard hat ½” EMT bender Non-contact Volt sensor Auto ranging DMM – True RMS Clamp Meter Tool pouch or bag Fuse for DMM (2) BX & AC cutter with extra blades 49/60 rosin core solder Drill bit set Flashlight Pad lock Small file Pocket Phillip’s Soldering pencil Wallboard saw Cordless tool set (optional) Receptacle tester Estimated Cost: $1200.00 - $1300.00 Note: Estimated costs reflect current market value and are subject to change.
    [Show full text]
  • LT-20PRO Lining Trailer Features List
    LATERAL LINING LT-20PRO LINING TRAILER COMPLETE FEATURES LIST LT-20PRO TRAILER FEATURES LIST OUTFITTERS PACKAGE FEATURES LIST (OPTIONAL) Pewter screwless exterior Internal 110v outlets (16) Gas can, 5 gal Pipe wrench 12” Needle nose pliers Exterior decal package External curbside 110v GFI Diesel can, 5 gal Wrench set, metric Channel locks outlets (2) Insulated walls and ceiling Cordless sawzall Wrench set, standard Wire cutters External curbside 220v outlet White interior Sawzall blade Claw hammer Rubber bands (bag) External and internal air Cordless drill Rubber mallet Calculator Black rubber coin flooring connections 5/16” nut setter Tape measure, 33 feet Hose clamps for recirculation Aluminum gravel guard Wet out roller bed hose up to 12” liner Extension cord, 50 feet (2) Tape measure, 100 feet D rings in floor and wall Wet out table wall mount Square shovel mounted e-track Safety cone (2) Fish tape, 125 feet Wall mounted air compres- Tool pouch Roof mounted AC unit Air hose, 50 feet with quick Permanent markers (pack) sor, 30 gallon connect couplings Garden hose Duct tape (4 rolls) Tool boxes (2) CIPP vacuum system Inversion lubrication sprayer Y – shut off Zip ties (bag) Paper towel and cleaning Recessed spare tire holder Ground sheeting plastic 5 gallon pail (5) supply cabinet with spare tire and wrench Industrial scissors Shovel Safety goggles (3) Upper storage cabinets 5,200 lb. tandem torsion Flashlight Push broom Utility knife Lower resin storage cabinets axles Latex gloves (box) Screwdriver set Utility blades (100) Floor to ceiling storage cabinet Hitch tongue lock Rags (box) Adjustable wrench Tongue mounted locked stor- Trailer door locks (2) age box Multi jack Inversion hose rack Wheel chock Wall hooks for liner and calibration tube (3) First aid kit 13,000 watt generator Fire extinguisher Built in generator slide out Ratchet strap set Specifications are general and subject to change without notice.
    [Show full text]
  • Every RACK-A-TIER Needs a Hooker! 10455 Part# Part# the Ultra Compact/Collapsible Wheeled Wire Dispenser!
    Table of Contents: WIRE MANAGEMENT TOOLS Qwik Lok – Locking Plug .............................................................................. 24 Rack-A-Tiers – Wire Dispenser ..................................................................... 3 Sluggo-Ox ..................................................................................................... 24 Hooker – Pipe Wrench Adapter ..................................................................... 3 Piper - Conduit Tracking System ................................................................... 25 EZ Roll – Wheeled Wire Dispenser ............................................................... 4 Nut Blaster – Wire Connector Tools .............................................................. 25 Tug Wise – Reel Dispenser ........................................................................... 4 Breaker Lok ................................................................................................... 25 Wire Tub – Coil Spinner for MC Cable, Flex & NMSC .................................. 5 HOLE CUTTING Thomas Wheeler – Coil Spinner for MC Cable, Flex & NMSC ...................... 5 Mega TCT Hole Saws ................................................................................... 26 Pocket Kart – Reel Carrying Tool .................................................................. 6 Heavy Duty TCT Masonry Hole Saws ........................................................... 26 Reel-End – Spool Repair ..............................................................................
    [Show full text]
  • Fish Tapes & Conduit Tools
    Fish Tapes & Conduit Tools Fish Tapes Wire Pulling & Conduit Tools Pulling wire and working with conduit is very challenging without the proper tools. Klein Tools’ complete line of conduit tools allows you to get the job done while saving time, effort and materials. 119 Fish Tapes Features: Polypropylene case and handle offer the Unique sloped handle maximum in impact optimizes hand resistance. position for quick hand-over-hand Round inner ring rewinds. design provides a smooth, surface for winding and rewinding. Raised fingergrips transfer 100% of the winding power from your hand and fingers. Fish Tapes & Conduit Tools Fish Tapes MADE IN USA Available in steel and fiberglass with a wide variety of tips. US Patents: 8899554 D574,277; 8,212,178; 8,168,921; 8,164,025 Other patents pending Multi-Groove Fiberglass Fish Tapes NEW! Additional Features: • Fiberglass Performance at 25% Lower Cost!* • Rigidity for long distance. • Less surface contact when pushing through crowded conduit. • Durable 7" (178 mm) leader helps push throughcrowded conduit. Old Profile New Profile Less surface contact with wires Cat. No. Tape Size Reel Diameter Weight Multi-Groove Fiberglass – 7" (179 mm) Spiral Leader 56055 100' L x 3/16"W (30 m L x 4.8 mm W) 13" (330 mm) 3.03 lbs. (1.37 kg) 56056 200' L x 3/16"W (60 m L x 4.8 mm W) 17" (432 mm) 6.16 lbs. (2.79 kg) Multi-Groove Fiberglass – Non-Conductive 56057 50' L x 3/16" W (15 m L x 4.8 mm W) 13" (330 mm) 2.33 lbs.
    [Show full text]