DOCSLIB.ORG

Electric Clutch

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Electric Clutch Operators/Parts Manual Manufacturing, Inc. www.greatplainsmfg.com 12905 2-Section No-Till Electric Clutch Effective 5/9/16 172-234M General Information General Information Important Notice Great Plains Manufacturing, Inc. provides this publica- describes the state of this product at the time of its pub- tion “as is” without warranty of any kind, either expressed lication, and may not reflect the product at all times in the or implied, while every precaution has been taken in the future. preparation of this manual, Great Plains Manufacturing, Printed in the United States of America. Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting For your convenience, record your Serial Number, Mod- from the use of the information contained herein. Great el Number and the Date Purchased in the spaces Plains Manufacturing, Inc. reserves the right to revise provided below. Have this information before you when and improve its products as it sees fit. This publication calling a Great Plains Authorized Dealer. This Operator’s Manual applies to the 2-Section No-Till Electric Clutch listed below: • 172-225A 24’ 2SNT Electric Clutch Field Update • 172-227A 30' 2SNT Electric Clutch Field Update Owner’s Information Name: _____________________________________ Serial Number _______________________________ Address ____________________________________ Model Number _______________________________ City________________State ____ Zip ___________ Date Purchased ______________________________ Phone______________________________________ Name of Dealership ___________________________ Dealer’s Name _______________________________ Address ____________________________________ City________________State ____ Zip ___________ Phone______________________________________ 2-Section No-Till Electric Clutch 172-234M Great Plains Mfg., Inc. 5/9/16 Introduction Table of Contents Using this Manual . 1 Maintenance . 7 Introduction . 1 Lubrication . 7 Section 1 Assembly Instructions & Set-Up . 2 Section 4 Parts . 8 Torque Values Chart for UNC Threads . 2 Lower Jackshaft Assembly . 8 Section 2 Installation Instructions . 2 Upper Jackshaft Assembly. 10 Section 3 Maintenance & Lubrication . 7 Using this Manual For your safety and to help in developing a better under- cation. The parts sections are for reference only and standing of your equipment we highly recommend that don’t require cover to cover reading. After reviewing your you read the operator sections of this manual. Reading manual store it in a dry, easily accessible location for fu- these sections not only provides valuable training but ture reference. also familiarizes you with helpful information and its lo- Introduction This manual has been prepared to instruct you in the safe and efficient operation of your 2-Section No-Till ! DANGER! Electric Clutch. Read and follow all instructions and Indicates an imminently hazardous situation which, if safety precautions carefully. not avoided, will result in death or serious injury. This The parts on your 2-Section No-Till Electric Clutch have signal word is limited to the most extreme situations. been specially designed and should only be replaced with genuine Great Plains parts. Therefore, should your 2-Section No-Till Electric Clutch require replacement ! WARNING! parts go to your Great Plains Dealer. Indicates a potentially hazardous situation which, if not The right hand and left hand as used throughout this avoided, could result in death or serious injury. manual is determined by facing in the direction the ma- chine will travel when in use unless otherwise stated. ! CAUTION! Indicates a potentially hazardous situation which, if not ! avoided, may result in minor or moderate injury. It may The SAFETY ALERT SYMBOL indicates that there is a also be used to alert against unsafe practices. potential hazard to personal safety involved and extra safety precautions must be taken. When you see this symbol, be alert and carefully read the message that fol- NOTE: Indicates a special point of information which lows it. In addition to design and configuration of requires your attention. equipment; hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment. IMPORTANT: Indicates additional information is pro- Watch for the following safety notations throughout vided that is necessary to prevent possible damage to your Operators Manual: the equipment only. 5/9/16 Great Plains Mfg., Inc. 2-Section No-Till Electric Clutch 172-234M -1 Section 1 Assembly Instructions & Set-Up Section 1 Assembly Instructions & Set-Up Torque Values Chart for UNC Threads Bolt head identification marks are as per grade. NOTE: Manufactur- Grade 2 Grade 5 Grade 8* ing marks will vary. Bolt Bolt Size Foot Pounds Newton-Meters Foot Pounds Newton-Meters Foot Pounds Newton-Meters inches mm Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 1/4" 6.35 5 6 6.8 8.13 9 11 12.2 14.9 12 15 16.3 20.3 5/16" 7.94 10 12 13.6 16.3 17 20.5 23.1 27.8 24 29 32.5 39.3 3/8" 9.53 20 23 27.1 31.2 35 42 47.5 57.0 45 54 61.0 73.2 7/16" 11.11 30 35 40.7 47.4 54 64 73.2 86.8 70 84 94.9 113.9 1/2" 12.70 45 52 61.0 70.5 80 96 108.5 130.2 110 132 149.2 179.0 9/16" 14.29 65 75 88.1 101.6 110 132 149.2 179.0 160 192 217.0 260.4 5/8" 15.88 95 105 128.7 142.3 150 180 203.4 244.1 220 254 298.3 358.0 3/4" 19.05 150 185 203.3 250.7 270 324 366.1 439.3 380 456 515.3 618.3 7/8" 22.23 160 200 216.8 271.0 400 480 542.4 650.9 600 720 813.6 976.3 1" 25.40 250 300 338.8 406.5 580 596 786.5 943.8 900 1080 1220.4 1464.5 1 1/8" 25.58 800 880 1084.8 1193.3 1280 1440 1735.7 1952.6 1 1/4" 31.75 1120 1240 1518.7 1681.4 1820 2000 2467.9 2712.0 1 3/8" 34.93 1460 1680 1979.8 2278.1 2380 2720 3227.3 3688.3 1 1/2" 38.10 1940 2200 2630.6 2983.2 3160 3560 4285.0 4827.4 * Thick nuts must be used with Grade 8 bolts NOTE: Torque requirements listed above do not apply to self-locking nuts. For self-locking nuts increase the torque requirements listed by 15%. Section 2 Installation Instructions Refer to Figure 2-1 page 3: Refer to Figure 2-3 on page 4: 1. Unfold the drill and lower it to the ground. 8. Install the round bore bearings (#11) in the casting 2. Remove the lower jackshaft shield from the 3-bolt and replace the snap ring (#12). Place the new 1" casting (#1) shaft (#13) with the sprocket (#14)and the roll pin (#15) into the 3-bolt casting. Leave the set screws 3. Loosen and remove the chain tighteners (#2) be- loose for now. tween the lower jackshaft and the gear box shaft. 9. Lower the drill back down. Install the lower jack shaft 4. Remove the cover plates from the gauge wheel collar(#16) with the 1/4" x 1 1/2" roll pin (#17). arms (#3). 10. Remove the top outside casting bolt (#18). 5. Support the gauge wheel arm until the tire is free to turn. Loosen the chain tightener (#4) and remove 11. Install sprocket (#20) to electric clutch (#21) with the the connectors. Place a wire (#5) on the end of the 1/4" x 3/4" bolts (#22). chain (#6). From the front of the tube pull the chain 12. Run the 3/8" x 3 1/2" bolt (#23) through the clutch through leaving the end of the wire to hook the edge anchor (#19) and thread 3/8" nut (#24) onto the bolt. of the tube. Tighten the bolt to the anchor tab. Place the 3/8" x 1 6. Raise the drill to the up position and drive out the roll 1/4" bolt (#25)with the thick flat washer (#27) and pin (#7) in the sprocket. lock washer (#26) in the end of the shaft and tighten it down. Refer to Figure 2-2 on page 4: Refer to Figure 2-4 on page 5: 7. Remove the hex shaft (#8) from the bearings (#10). Take the snap ring (#9) out of the casting and re- 13. Pull the wire (#28) back around the shaft and move the hex bore bearings (#10). through the tube and install the chain connectors. 2 2-Section No-Till Electric Clutch 172-234M Great Plains Mfg., Inc. 5/9/16 Section 2 Installation Instructions Replace the shields (#29). 18. Mount the shaft under the gear box with the 5/16" Refer to Figure 2-5 on page 5: bolts (#39). Leave the bolts loose and place a 1/8" thick plate between the 1" shaft and the bottom of 14. Remove the gear box shaft by first loosening the set the gear box shaft (See Insert Figure 2-6). Push the screws on the bearings (#30) and the bevel gears 1" shaft against it and put the shaft on the gear box (#31). Also remove the clutch arms (#32) and the keeping the lower one level. Tighten the bolts on the carriage bolt (#33) from the cam plate. If a small bearings (#39). Bolt the clutch cam plate against the seeds attachment is involved, remove the shields mounting bracket (#40). Lock the set screws (#41) and the chains. Take the 5/16" bolts (#34) out of the on the bearings and the bevel gear.
Load more

Recommended publications
  • Safety Warnings
    SAFETY INFORMATION Doc ID: 192-297A Doc Revision: 010418 Improper installation, service or maintenance of this product can cause death, serious injury, and/or property damage. • Only a trained and qualified mechanic should install this product. • Read these directions thoroughly before installation. • For assistance or additional information, please call Rekluse Motor Sports. Failure to become familiar with Rekluse auto clutch operation before use can cause death, serious injury, and/or property damage. • Completely familiarize yourself with the operation of the Rekluse auto clutch. • Do NOT allow anyone unfamiliar with the operation of the Rekluse auto clutch to operate a Rekluse auto clutch equipped motorcycle. • Do NOT attempt to ride a Rekluse auto clutch equipped motorcycle on public roads until you are completely familiarized with the operation of this product. • First practice riding Rekluse auto clutch equipped motorcycles in a safe area free of obstructions. A Rekluse auto clutch can engage suddenly and cause death, serious injury, and/or property damage. Loss of control can result from sudden and unexpected engagement of the clutch from a free-wheeling state. Rear tire may slow from the engine's compression braking effect and cause the rear tire to skid. • Always select a suitable transmission gear for your ground speed, engine RPM and terrain. • Release the clutch lever slowly and apply a small amount of throttle to control engine compression braking after downshifting. See installation and/or user’s guide for more information about free-wheeling. Rekluse auto clutch can make your motorcycle appear to be in neutral when in gear, even when the engine is running and clutch lever released.
    [Show full text]
  • Mission CO2 Reduction: the Future of the Manual Transmission: Schaeffler
    56 57 Mission CO2 Reduction The future of the manual transmission N X D H I O E A S M I O U E N L O A N G A D F J G I O J E R U I N K O P J E W L S P N Z A D F T O I E O H O I O O A N G A D F J G I O J E R U I N K O P O A N G A D F J G I O J E R A N P D H I O E A S M I O U E N L O A N G A D F O I E R N G M D S A U K Z Q I N K J S L O G D W O I A D U I G I R Z H I O G D N O I E R N G M D S A U K N M H I O G D N O I E R N G U O I E U G I A F E D O N G I U A M U H I O G D V N K F N K K R E W S P L O C Y Q D M F E F B S A T B G P D R D D L R A E F B A F V N K F N K R E W S P D L R N E F B A F V N K F N W F I E P I O C O M F O R T O P S D C V F E W C G M J B J B K R E W S P L O C Y Q D M F E F B S A T B G P D B D D L R B E Z B A F V R K F N K R E W S P Z L R B E O B A F V N K F N J V D O W R E Q R I U Z T R E W Q L K J H G F D G M D S D S B N D S A U K Z Q I N K J S L W O I E P JürgenN N B KrollA U A H I O G D N P I E R N G M D S A U K Z Q H I O G D N W I E R N G M D G G E E A Y W T R D E E S Y W A T P H C E Q A Y Z Y K F K F S A U K Z Q I N K J S L W O Q T V I E P MarkusN Z R HausnerA U A H I R G D N O I Q R N G M D S A U K Z Q H I O G D N O I Y R N G M D T C R W F I J H L M L K N I J U H B Z G V T F C A K G E G E F E Q L O P N G S A Y B G D S W L Z U K RolandO G I SeebacherK C K P M N E S W L N C U W Z Y K F E Q L O P P M N E S W L N C T W Z Y K W P J J V D G L E T N O A D G J L Y C B M W R Z N A X J X J E C L Z E M S A C I T P M O S G R U C Z G Z M O Q O D N V U S G R V L G R M K G E C L Z E M D N V U S G R V L G R X K G K T D G G E T O
    [Show full text]
  • 5-Speed Manual Transmission Again, Or by Turning the Ignition Do Not Rest Your Foot on the Clutch the Transmission Has Five Fully Key to the "OFF" Position
    5-Speed Manual Transmission again, or by turning the ignition Do not rest your foot on the clutch The transmission has five fully key to the "OFF" position. pedal while driving; this can synchronized forward speeds. The cause the clutch to slip, resulting gear shift pattern is provided on Operation of the "WINTER" in damage to the clutch. mode should be limited to the transmission lever knob. The slippery road conditions only. backup lights turn on when When you are stopped on an Operation of the "WINTER" shifted into the reverse gear. upgrade, do not hold the vehicle mode during normal driving in place by letting the clutch pedal conditions will cause decreased up part-way. Use the foot brake or performance and sluggish the parking brake. acceleration. Never shift into reverse gear until the vehicle is completely stopped. Do not "over-speed" the engine when shifting down to a lower gear. The shift lever cannot be shifted directly from fifth gear into Reverse. When shifting into Reverse gear from fifth gear, Driving Tips depress the clutch pedal and shift completely into Neutral position, Always depress and release the then shift into Reverse gear. clutch pedal fully when shifting. Instruments and Controls Shift Speed Chart For cruising, choose the highest Transfer Control gear for that speed (cruising speed The lower gears of the 4WD Models is defined as a relatively constant transmission are used for normal The "4WD" indicator light speed operation). acceleration of the vehicle to the illuminates when 4WD is engaged desired cruising speed. The The upshift indicator (U/S) lights with the 4WD-2WD switch.
    [Show full text]
  • Clutch/Brake Packages Section F
    Clutch/Brake Packages Section F CBC Clutch/Brake Combination ............................................................................................................................................. 203 Dimensional and Technical Data ................................................................................................................................................. 205 FSPA Packages Description .................................................................................................................................................... 213 Dimensional and Technical Data ................................................................................................................................................ 215 AMCB AccuStop Description .................................................................................................................................................. 223 Dimensional and Technical Data ................................................................................................................................................ 225 21 DCB Clutch/Brake Description .......................................................................................................................................... 227 Dimensional and Technical Data ................................................................................................................................................ 228 202 EATON Airflex® Clutches & Brakes 10M1297GP November 2012 CBC Clutch/Brake Combination CBC Clutch/Brake
    [Show full text]
  • FE Analysis of a Dog Clutch for Trucks with All-Wheel-Drive FE-Analys Av En Klokoppling För Allhjulsdrivna Lastbilar
    FE analysis of a dog clutch for trucks with all-wheel-drive FE-analys av en klokoppling för allhjulsdrivna lastbilar Växjö, 2010-05-28 15p Mechanical Engineering/4MT01E Handledare: Hans Hansson, SwePart Transmission AB Handledare: Andreas Linderholt, Linnéuniversitetet, Institutionen för teknik Examinator: Anders Karlsson, Linnéuniversitetet, Institutionen för teknik Thesis nr: TEK 054/2010 Författare: Mattias Andersson, Kordian Goetz Organisation/ Organization Författare/Author(s) Linnéuniversitetet Mattias Andersson, Kordian Goetz Institutionen för teknik Linnaeus University School of Engineering Dokumenttyp/Type of Document Handledare/tutor Examinator/examiner Examensarbete/Master Thesis Andreas Linderholt Anders Karlsson Titel och undertitel/Title and subtitle FE-analys av en klokoppling för allhjulsdrivna lastbilar / FE analysis of a dog clutch for trucks with all-wheel-drive Sammanfattning (på svenska) Examensarbetet är utfört för att försöka förbättra inkopplingen av allhjulsdrift på lastbilar. När en lastbil kör på halt eller löst väglag kan hjulspinn uppstå vid bakhjulen. Om föraren kopplar in allhjulsdriften när hjulen börjat slira uppstår en relativ rotationshastighet mellan halvorna i klokopplingen. Om denna relativa rotationshastighet är för hög kommer halvorna i kopplingen studsa mot varandra innan de kopplas ihop eller inte koppla ihop alls. För att undvika detta problem har klokopplingens tandgeometri modifierats. FE simuleringar är gjorda på den ursprungliga modellen samt alla nya modeller för att ta reda på vilken som kopplar vid högst relativa rotationshastighet. Resultaten visar att förbättringar kan göras. Enkla modifieringar på avfasningarnas avstånd och vinklar visar att klokopplingen kan klara upp till 120 rpm i relativ rotationshastighet jämfört med den ursprungliga modellen som endast klarar 50 rpm. Nyckelord Klokoppling, Allhjulsdrift, FE-analys Abstract (in English) The thesis is carried out in order to improve the transfer case in trucks with all-wheel-drive.
    [Show full text]
  • Sprag Clutch
    Sprag Clutch Overrunning - Indexing - Backstopping 2nd Edition Clutches & Couplings Wentloog Corporate Park, Newlands Road, Cardiff CF3 2EU Wales Tel: +44 (0) 29 20792737 Fax: +44 (0) 29 20793004 (Sales): +44 (0) 29 20791360 E-Mail: [email protected] Web: www.renold.com Products: Shaft Couplings, Resilient Gear and Fluid Soft-Start, Clutches: Sprag and Trapped Roller Freewheels, Slipping and Air Types. Gears Holroyd Gears Works, Milnrow, Rochdale OL16 3LS England Tel: +44 (0) 1706 751000 Fax: +44 (0) 1706 751001 E-Mail: [email protected] Web: www.renold.com Products: Worm, Helical and Bevel-Helical Speed Reducer Gear Units, Geared Motor Units and Fully Engineered Drive Packages. For more information telephone us on +44 (0) 29 20792737 or fax +44 (0) 29 20791360 E-Mail: [email protected] Contents Page No Renold Clutches & Couplings Company Profile 5 Sprag Clutch General Specification 6 Sprag Clutch Product Features 7 Typical Applications 8 Examples of Sprag Clutch Mounting Arrangements 9 Pictorial Content Indexing - Overrunning - Backstopping 10 - 11 Selection of Sprag Clutches - Ratings Table 12 - 16 SA Series Sprag Clutch 17 SB Series Sprag Clutch 19 SO/SX Series Sprag Clutch 22 Stub Shaft Adaptors 28 Sprag Clutch Flexible Couplings 30 DM Series Sprag Clutch 34 Sprag Clutch Holdbacks 37 Sprag Clutch Holdback - Selections 38 Sprag Clutch Holdback - Applications 39 SH Series Sprag Clutch Holdbacks 40 SLH Series Sprag Clutch Holdbacks 42 SH & SLH Series Sprag Clutch Bore Sizes 44 Enhanced Seal Holdbacks 46 Tension Release Mechanisms 48 Torque Limited Sprag Clutch 49 USA Bore & Shaft Sizes and Tolerances 50 Installation and Lubrication 51 Renold Group Product Range 52 - 53 Renold Worldwide Sales & Services 54 RENOLD Clutches and Couplings.
    [Show full text]
  • Centric Overload & Centrifugal Clutches
    ALTRA MOTION Centric Overload & Centrifugal Clutches Solutions To Torque/Timing Control BOSTON GEAR Centric Overload & Centrifugal Clutches Boston Gear Boston Gear offers the industry’s largest line up of reliable speed reducers, gearing and other quality drivetrain components. With more than 125 years of frontline experience, Boston Gear is recognized globally as a premier resource for extremely reliable, high- performance power transmission components. Boston Gear offers the industry’s most comprehensive product array featuring more than 30,000 standard products combined with the ability to custom engineer unique solutions when required. Product lines include standard enclosed gear drives, custom speed reducers, AC/DC motors, DC drives and Centric brand overload clutches and torque limiters. VISIT US ON THE WEB AT BOSTONGEAR.COM Altra Motion Altra is a leading global designer and producer of a wide range of electromechanical power transmission and motion control components and systems. Providing the essential control of equipment speed, torque, positioning, and other functions, Altra products can be used in nearly any machine, process or application involving motion. From engine braking systems for heavy duty trucks to precision motors embedded in medical robots to brakes used on offshore wind turbines, Altra has been serving customers around the world for decades. Altra’s leading brands include Ameridrives, Bauer Gear Motor, Bibby Turboflex, Boston Gear, Delevan, Delroyd Worm Gear, Formsprag Clutch, Guardian Couplings, Huco, Jacobs Vehicle Systems, Kilian, Kollmorgen, Lamiflex Couplings, Marland Clutch, Matrix, Nuttall Gear, Portescap, Stieber, Stromag, Svendborg Brakes, TB Wood’s, Thomson, Twiflex, Warner Electric and Wichita Clutch. VISIT US ON THE WEB AT ALTRAMOTION.COM Boston Gear Centric Clutch Products Table of Contents INTRODUCTION .................................................................................................
    [Show full text]
  • Standard Clutches and Brakes MATRIX PROVIDES SUPERIOR BRAKES, CLUTCHES and TORQUE LIMITERS...WORLDWIDE
    ALTRA MOTION Standard Clutches and Brakes MATRIX PROVIDES SUPERIOR BRAKES, CLUTCHES AND TORQUE LIMITERS...WORLDWIDE. With over 75 years in the design and manufacture sales and technical support in over 70 countries of standard, as well as customized brakes and around the world. Matrix support extends well clutches, Matrix products meet the needs of the beyond sales and technical applications with power transmission industry through a flexible manufacturing capability in North America, Europe approach to application and sales support. and Asia Pacific. Matrix has the capability to serve the global market. Matrix maintains a dedicated Early involvment in design processes by the customer service, sales, and distribution operation Matrix engineering team holds the key to building in North America to support a large and growing customer confidence — resulting in custom customer base in the USA. solutions which match application requirements. Based in Brechin, Scotland, Matrix is a rapidly Engineering growing company focused on providing custom engineered solutions to brake, clutch and A dedicated team of market-focused engineering coupling applications in a wide range of industrial and manufacturing staff provides successful markets. Backed by over 65 years of experience, solutions to the technical and commercial the Matrix brand name provides cost-effective challenges faced by our markets and customers. engineered solutions for applications in markets We utilize a flexible approach to solving such such as forklift trucks, construction vehicles, challenges enabling our team to provide cranes, winches, industrial automation, and application and technical support from concept to machine tools. completion. Matrix firmly commits to investing in people, Each of the products in our comprehensive range technology and processes to lead the market can be customized to meet specific and unique forward.
    [Show full text]
  • Ker-Train High Efficiency Drive-By-Wire Transmission Systems
    2017 NDIA GROUND VEHICLE SYSTEMS ENGINEERING AND TECHNOLOGY SYMPOSIUM POWER & MOBILITY (P&M) TECHNICAL SESSION AUGUST 8-10, 2017 - NOVI, MICHIGAN KER-TRAIN HIGH EFFICIENCY DRIVE-BY-WIRE TRANSMISSION SYSTEMS Mike Brown Brent Marquardt Ker-Train Research Inc. Kingston, Ontario Disclaimer: Reference herein to any specific commercial company, product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the Department of the Army (DoA). The opinions of the authors expressed herein do not necessarily state or reflect those of the United States Government or the DoA, and shall not be used for advertising or product endorsement purposes. ABSTRACT Ker-Train Research Inc. has designed and manufactured a 32-speed tracked- vehicle transmission and an 8-speed efficient power take-off fan drive that have been shown through testing to not only increase vehicle performance and overall system efficiency, but also have the ability to be controlled fully drive-by-wire making them excellent candidates for integration into autonomous vehicles. INTRODUCTION to the sprockets while bettering fuel economy at the Ker-Train Research Inc. (KTR) is a company founded same time, thus improving vehicle range and tactical on unique drive train technologies and non-conventional and logistical abilities. KTR has designed and design approaches. Unrivaled packaging is achieved in manufactured two first generation “Alpha” units for the KTR’s transmissions using patented high power density U.S. Army Tank Automotive Research, Development addendum contact coplanar gearing, high efficiency and Engineering Center (TARDEC) that are currently PolyCone clutches, compact one-to-one torque awaiting dyno testing at the TARDEC facility.
    [Show full text]
  • 1700 Animated Linkages
    Nguyen Duc Thang 1700 ANIMATED MECHANICAL MECHANISMS With Images, Brief explanations and Youtube links. Part 1 Transmission of continuous rotation Renewed on 31 December 2014 1 This document is divided into 3 parts. Part 1: Transmission of continuous rotation Part 2: Other kinds of motion transmission Part 3: Mechanisms of specific purposes Autodesk Inventor is used to create all videos in this document. They are available on Youtube channel “thang010146”. To bring as many as possible existing mechanical mechanisms into this document is author’s desire. However it is obstructed by author’s ability and Inventor’s capacity. Therefore from this document may be absent such mechanisms that are of complicated structure or include flexible and fluid links. This document is periodically renewed because the video building is continuous as long as possible. The renewed time is shown on the first page. This document may be helpful for people, who - have to deal with mechanical mechanisms everyday - see mechanical mechanisms as a hobby Any criticism or suggestion is highly appreciated with the author’s hope to make this document more useful. Author’s information: Name: Nguyen Duc Thang Birth year: 1946 Birth place: Hue city, Vietnam Residence place: Hanoi, Vietnam Education: - Mechanical engineer, 1969, Hanoi University of Technology, Vietnam - Doctor of Engineering, 1984, Kosice University of Technology, Slovakia Job history: - Designer of small mechanical engineering enterprises in Hanoi. - Retirement in 2002. Contact Email: [email protected] 2 Table of Contents 1. Continuous rotation transmission .................................................................................4 1.1. Couplings ....................................................................................................................4 1.2. Clutches ....................................................................................................................13 1.2.1. Two way clutches...............................................................................................13 1.2.1.
    [Show full text]
  • Chain Drive Installation 1
    CHAIN DRIVE INSTALLATION THIS DRIVE IS TO BE INSTALLED BY A QUALIFIED HD MECHANIC. FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID OUR WARRANTY AND LIABILITY FOR THIS PRODUCT. 1. BDL’s drives are to be used with stock OEM parts. Use of aftermarket parts may require other modifications or may cause starter and alignment problems. (Aftermarket starters may cause premature wear on our starter gear) 2. Fill out our BDL’s registration card. 3. A starter pinion gear is enclosed and is for use on all 1994-up models only. You must replace the stock pinion gear with BDL’s pinion gear on all 1994 up models. 4. You must inspect the drive after the first 100 miles and every 2500 miles after for proper chain tension. 5. Disconnect battery, remove spark plugs and support bike so it will not fall. 6. Remove primary drive if you are replacing an existing drive. (Refer to HD manual) 7. Inspect new drive and check for fit. Install both sprockets and make sure motor and transmission shafts are square with each other. Align sprockets using a 5/16” drill rod or other sturdy straight edge to check for proper alignment. Remove sprockets at this time. 1 8. Install chain adjuster assembly if this is a new installation. 9. Re-install front sprocket and rear clutch basket assembly with chain. 10. Tighten engine nut and transmission mainshaft nut to HD specifications using red loctite. 11. Adjust chain to proper tension. (Refer to HD manual) 12. Soak clutch plates for 15 minutes. We recommend ATF type F or check the HD manual for whichever is recommended for a clutch lubricant.
    [Show full text]
  • Spicer Powr-Lok
    SPICER� MODEL 60 MODEL 70 POWR-LOK LIMITED SLIP DIFFERENTIAL SPICER AXLE DIVISION � DANA CORPORATION FORT WAYNE, INDIANA TABLE OF CONTENTS 1 LUBRICATION ................................................................... ......................................... .......................... OPERATION.......................................................................................................................................... 1 TROUBLE SYMPTOMS AND POSSIBLE CAUSES .......................................................................... 1 CHECKING WHEEL TORQUE .............. ............................................... ............................................... 2 DISASSEMBLY - Removal, Inspection and Repair......................................................................... 2 DECREASE WHEEL END TORQUE ...................................... ............................................................. 7 REASSEMBLY ....... ................................................................................................................................ 8 COMPLETE ASSEMBLY REPLACEMENT ................................................ ......................................... 11 IMPORTANT SAFETY NOTICE Should an axle assembly require component parts replacement, it is recommended that "Original Equipment" replacement parts be used. They may be obtained through your local service dealer or other original equip· ment manufacturer parts supplier. CAUTION: THE USE OF NON-ORIGINAL EQUIPMENT REPLACE· MENT PARTS IS NOT RECOMMENDED
    [Show full text]