Current issue date: 2 September 2020 Original approval(s): Expiry date: 31 December 2022 ISO 14001 - 1 January 2005 Certificate identity number: 10290211 ISO 45001 - 11 September 2007 ISO 9001 - 9 December 2002
Certificate of Approval
This is to certify that the Management System of:
Atlas Copco Airpower NV
Business Area Compressor Technique
Boomsesteenweg 957, 2610 Wilrijk, Belgium
has been approved by Lloyd's Register to the following standards:
ISO 14001:2015, ISO 45001:2018, ISO 9001:2015
Approval number(s): ISO 14001 – 0019527, ISO 45001 – 0019525, ISO 9001 – 0019526
This certificate is valid only in association with the certificate schedule bearing the same number on which the locations applicable to this approval are listed.
The scope of this approval is applicable to:
ISO 14001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
ISO 45001:2018 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
ISO 9001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco brand as well as other Brands from the Brand portfolio.
Paul Graaf Area Operations Manager North Europe Issued by: Lloyd's Register EMEA for and on behalf of: Lloyd's Register Quality Assurance Limited
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 1 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ACA - CC - Atlas Copco Canada Inc. Atlas Copco ISO 14001:2015
Compressors Canada Head office Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process 5060 Rue Levy, Ville St. Laurent, Quebec,
compressors and generators. H4R 2P1, Canada
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Branch Office Air ISO 14001:2015
Repair Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process 675 Malenfant Boulevard, Dieppe New Brunswick,
compressors and generators. E1A 5T8, Canada
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 2 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ACA - CC - Atlas Copco Canada Inc. Branch Office British ISO 14001:2015
Colombia (Vancouver) Sales, marketing, installation and servicing of Atlas Copco Unit 4, 19840 - 96th Avenue, Langley, British Colombia, equipment for industrial compressors, gas and process
compressors and generators. V1M3B9, Canada
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Calgary Sales Office ISO 14001:2015 Sales, marketing, installation and servicing of Atlas Copco Suite 276, 2880 - 45th Ave, SE Calgary, AB, equipment for industrial compressors, gas and process T2B 3M1, Canada
compressors and generators.
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 3 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ACA - CC - Atlas Copco Canada Inc. Edmonton Customer ISO 14001:2015
Service Center Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process 17810 - 114 Avenue, Edmonton, Alberta, T5S 2L8,
compressors and generators. Canada
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ACA - CC - Atlas Copco Canada Inc. Toronto Customer ISO 14001:2015
Service Center (Ontario Branch) Sales, marketing, installation and servicing of Atlas Copco Unit 13, 2900 Argentia Road, Mississauga, Ontario, L5N 7X9, equipment for industrial compressors, gas and process
compressors and generators. Canada
ISO 45001:2018 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
ISO 9001:2015 Sales, marketing, installation and servicing of Atlas Copco equipment for industrial compressors, gas and process
compressors and generators.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 4 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
AEA - CC - Atlas Copco Gas and Process Service ISO 14001:2015
Workshop Marketing, sales, distribution, assembling, installation and Jebel Ali Free Zone Area, South Blue Shade, Warehouse No. service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially FZS 1 AH02, Dubai, United Arab Emirates built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
ISO 45001:2018 Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
ISO 9001:2015 Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
AEA - CC - Atlas Copco Services Middle East OMC ISO 45001:2018 Gold and Diamond Park,, Building 2, 1st floor, office nr. 2121, Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment Dubai, United Arab Emirates equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 5 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
AEA - CC - Atlas Copco Services Middle East OMC ISO 14001:2015 Gold and Diamond Park, Building No.2, 1st Floor, Office No. Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment 2121, Sheikh Zayed Road, Dubai, equipment, generators sets, vacuum pumps, and specially United Arab Emirates built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
ISO 9001:2015 Marketing, sales, distribution, assembling, installation and service of air/gas compressors and air/gas treatment equipment, generators sets, vacuum pumps, and specially built gas and process compressors and expansion turbines, cryogenic pumps, assemblies and related products and services under Atlas Copco Brand as well as
other Brands from the Brand Portfolio.
AFR - CC - Atlas Copco Compresseurs S.A.S. Atlas Copco ISO 14001:2015
France SAS Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, 2 Avenue de l'Eguillette, ZI du Vert Galant, turbo machinery, vacuum pumps, air / gas treatment 95310 Saint-Ouen-l'Aumône, France equipment, assemblies and related products and services,
under Atlas Copco Brand.
ISO 45001:2018 Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, assemblies and related products and services,
under Atlas Copco Brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 6 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, design, distribution, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, assemblies and related products and services,
under Atlas Copco Brand.
APA - PC - Atlas Copco Airpower N.V. Airtec ISO 14001:2015 Marketing, design, sales, manufacturing, installation and Boomsesteenweg 957, 2610 Wilrijk, Belgium service of compressors, air treatment equipment,
generator sets and related products and services.
ISO 45001:2018 Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
ISO 9001:2015 Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
APF - PC - Atlas Copco Airpower Oil-free Air ISO 14001:2015 Marketing, design, sale, manufacturing, installation and Boomsesteenweg 957, 2610 Wilrijk, Belgium service of compressors, air treatment equipment,
generator sets and related products and services.
ISO 45001:2018 Marketing, design, sale, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 7 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, design, sale, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
API - PC - Atlas Copco Airpower Industrial Air ISO 14001:2015 Marketing, design, sales, manufacturing, installation and Boomsesteenweg 957, 2610 Wilrijk, Belgium service of compressors, air treatment equipment,
generator sets and related products and services.
ISO 45001:2018 Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
ISO 9001:2015 Marketing, design, sales, manufacturing, installation and service of compressors, air treatment equipment,
generator sets and related products and services.
APS - DC - Atlas Copco Airpower Service Center ISO 14001:2015 Distribution of air compressors, air treatment equipment, Boomsesteenweg 957, 2610 Wilrijk, Belgium
generator sets and related accessories and spares.
ISO 45001:2018 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
ISO 9001:2015 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 8 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ARG - CC - Atlas Copco Argentina S.A.C.I. ISO 14001:2015 Estados Unidos 5335, B1667JHQ Malvinas Argentinas, Buenos Marketing of compressors, quality air systems, service and
spare parts supply. Aires, Argentina
ISO 45001:2018 Marketing of compressors, quality air systems, service and
spare parts supply.
ISO 9001:2015 Marketing of compressors, quality air systems, service and
spare parts supply.
ASA - CC - Atlas Copco GmbH Kompressoren & ISO 14001:2015
Drucklufttechnik Marketing, sales, design and service of air/gas compressors, generator sets and related products and Office Park 1, Top B02, 1300 Flughafen Wien,
services. Austria
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 9 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
AUA - CC - Atlas Copco Compressors Australia ISO 14001:2015 Marketing, sales, design and service of air/gas 3 Bessemer Street, Blacktown, 2148, Australia compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
AUA - CC - Atlas Copco Compressors Australia Brisbane ISO 14001:2015
Branch Marketing, sales, design and service of air/gas 25 Bluestone Circuit, Seventeen Mile Rocks, Brisbane, compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies. Queensland, 4073, Australia
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 10 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
AUA - CC - Atlas Copco Compressors Australia Melbourne ISO 14001:2015
Branch Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and 1480 Sydney Rd, 3061 Campbellfield, Victoria,
separation equipment, accessories and assemblies. Australia
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
AUA - CC - Atlas Copco Compressors Australia Perth ISO 14001:2015
Branch Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and 535 Abernethy Road, Kewdale, Western Australia,
separation equipment, accessories and assemblies. 6105, Australia
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, vacuum, air/gas treatment equipment and
separation equipment, accessories and assemblies.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 11 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
BDA - CC - Atlas Copco Bangladesh Limited ISO 14001:2015 Impetus, level #6, 242/B, Tejgaon-Gulshan Link Road, Tejgaon Sales and service of reciprocating gas, oil injected and oil
free compressors, dryers and air line accessories. I/A, Dhaka - 1208, Bangladesh
ISO 45001:2018 Sales and service of reciprocating gas, oil injected and oil
free compressors, dryers and air line accessories.
ISO 9001:2015 Sales and service of reciprocating gas, oil injected and oil
free compressors, dryers and air line accessories.
BEL - CC - Atlas Copco Belgium N.V. ISO 14001:2015 Marketing, sales and service of air/gas compressors, Brusselsesteenweg 346, 3090 Overijse, Belgium
generator sets and related products and services.
ISO 45001:2018 Marketing, sales and service of air/gas compressors,
generator sets and related products and services.
ISO 9001:2015 Marketing, sales and service of air/gas compressors,
generator sets and related products and services.
BEN - CC - OriginAir Europe ISO 14001:2015 (Re)manufacturing, installation and service of Ten Bergstraat 4, 2830 Willebroek, Belgium compressors, air treatment equipment and related
products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 12 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 (Re)manufacturing, installation and service of compressors, air treatment equipment and related
products and services.
ISO 9001:2015 (Re)manufacturing, installation and service of compressors, air treatment equipment and related
products and services.
BQD - PC - Product Company Brazil ISO 14001:2015 Alameda Araguaia 2700, Tamboré, Barueri - São Paulo, Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related 06455-000, Brazil
products.
ISO 45001:2018 Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related
products.
ISO 9001:2015 Marketing, design, manufacturing, assembling of air compressors, blowers, generator sets and related
products.
BRD - CC - Atlas Copco Brasil Ltda Compressor Technique ISO 14001:2015
- Head Office Marketing, sales, distribution, service of air / gas Alameda Araguaia, 2700, Tamboré, Barueri - São Paulo, compressors, blowers, vacuum pumps, air / gas treatment
equipment and related products. 06455-000, Brazil
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 13 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution, service of air / gas compressors, blowers, vacuum pumps, air / gas treatment
equipment and related products.
ISO 9001:2015 Marketing, sales, distribution, service of air / gas compressors, blowers, vacuum pumps, air / gas treatment
equipment and related products.
BRD - CC - Belo Horizonte Branch, Atlas Copco Brasil Ltda ISO 9001:2015
Avenida Heráclito Mourão de Miranda, 1500, Bairro Castelo, Sales of air / gas compressors, blowers, vacuum pumps,
air / gas treatment equipment and related products. Belo Horizonte - MG, 31330-142, Brazil
BRD - CC - Brazil Service Center (BSC) São Paulo Atlas ISO 14001:2015
Copco Brasil Ltda Distribution of air / gas compressors, blowers, vacuum Avenida Piraíba 202, Tamboré, Barueri - SP (São Paulo), pumps, air / gas treatment equipment, related products
and spare parts. 06460-121, Brazil
ISO 45001:2018 Distribution of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment, related products
and spare parts.
ISO 9001:2015 Distribution of air / gas compressors, blowers, vacuum pumps, air / gas treatment equipment, related products
and spare parts.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 14 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
BRD - CC - Curitiba Branch, Atlas Copco Brasil Ltda ISO 9001:2015 Antonio Kaminski street 73, Orleans, Curitiba - PR, 81200-402, Sales of air / gas compressors, blowers, vacuum pumps,
air / gas treatment equipment and related products. Brazil
BRD - CC - Porto Alegre Branch, Atlas Copco Brasil Ltda ISO 9001:2015 Joaquim Silveira street, 1038, Porto Alegre, São Sebastião - RS, Sales of air / gas compressors, blowers, vacuum pumps,
air / gas treatment equipment and related products. 91060-320, Brazil
BRD - CC - Rio de Janeiro Branch, Atlas Copco Brasil Ltda ISO 9001:2015
Avenida da Américas, 1155 – Sala 505, 22631-000 Barra da Sales of air / gas compressors, blowers, vacuum pumps,
air / gas treatment equipment and related products. Tijuca, Rio de Janeiro - RJ, Brazil
CHA - CC - Atlas Copco (Schweiz) AG Kompressoren und ISO 14001:2015
Druckluftaufbereitung Marketing, sales, design and service of air/gas compressors, generator sets and related products and Büetigenstrasse 80, 2557 Studen / Biel,
services. Switzerland
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
CJE - CC - Liuzhou Tech Machinery Co., Ltd Liuzhou ISO 14001:2015
Customer Center Marketing, Sales and Servicing of air compressors, filters
and dryers. B-22-1 Yanghe New Industrial Zone, Liuzhou,
Guangxi 545006, China
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 15 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, Sales and Servicing of air compressors, filters
and dryers.
ISO 9001:2015 Marketing, Sales and Servicing of air compressors, filters
and dryers.
CJI - CC - Wuxi Pneumatech Air/Gas Purity Equipment Co ISO 14001:2015
Ltd. Sales, commissioning and after-sales services of No. 36 Zhujiang Road, New District, Wuxi 214028, Jiangsu, refrigerated compressed air dryers, regenerative compressed air dryers, compressed air filters and relative China
accessories.
ISO 45001:2018 Sales, commissioning and after-sales services of refrigerated compressed air dryers, regenerative compressed air dryers, compressed air filters and relative
accessories.
ISO 9001:2015 Sales, commissioning and after-sales services of refrigerated compressed air dryers, regenerative compressed air dryers, compressed air filters and relative
accessories.
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Antofagasta Branch Marketing, sales, design, distribution, assembling, Avenida Pedro Aguirre Cerda 15600, Modulo C20 -C21 installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas -Megacentro Antofagasta, Chile treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 16 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Calama Branch Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Calle el litio, Sitio 1, Manzana G, Puerto Seco Calama, Chile expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 17 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Concepción Branch Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Calle 3 N° 1954, Parque Industrial Ejército Concepción, Chile expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 18 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Copiapó Branch Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Panamericana Norte 3604, Megacentro Copiapó, expanders, turbo machinery, vacuum pumps, air/gas Chile treatment equipment, generator sets, assemblies and
related products and services.
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Head Office Aerea de Negocio Compressores Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Avenida el Retiro 1270, Renca, Megacentro Santiago, Chile expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 19 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
CLK - CC - Atlas Copco Chile S.P.A. ISO 14001:2015
Iquique Branch Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Avenida Sotomayor # 2141 Ciudad Iquique Comuna, expanders, turbo machinery, vacuum pumps, air/gas Iquique Region de Tarapaca , Chile treatment equipment, generator sets, assemblies and
related products and services.
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 20 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
COF - PC - Atlas Copco (Shanghai) Process Equipment Co., ISO 14001:2015
Ltd. Research and development, manufacture and assembling No. 899 Cenglin Road, Lingang New City, Pudong New Area, of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, Shanghai 201306, China screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and
technical consultation.
ISO 45001:2018 Research and development, manufacture and assembling of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and
technical consultation.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 21 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Research and development, manufacture and assembling of single stage and multiple stages gear type turbo compressor, direct drive turbo compressor, expander, screw compressor and ancillary facilities; sales of self-manufactured products; Import, export, wholesale and commission agency of the above-mentioned similar commodities and related parts and components (except auctions); offering relevant after-sales services, maintenance, test and debugging, sales of lube oil and
technical consultation.
COV - PC - Liuzhou Tech Machinery Co., Ltd ISO 14001:2015 B-22-1 Yanghe New Industrial Zone 545006 Liuzhou, Guangxi, Design, manufacture, assembling, sales and servicing of
air compressors and filters. Sales and servicing of dryers. China
ISO 45001:2018 Design, manufacture, assembling, sales and servicing of
air compressors and filters. Sales and servicing of dryers.
ISO 9001:2015 Design, manufacture, assembling, sales and servicing of
air compressors and filters. Sales and servicing of dryers.
COX - PC - Pan-Asia Gas Technologies (Wuxi) Co., Ltd ISO 14001:2015 No. 15-2 ChangJiang South Road, New District, Wuxi, Jiangsu Design, manufacture and after-sales service of air compressor, compressed air dryer and ancillary 214028, China
equipment and parts of the above products.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 22 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Design, manufacture and after-sales service of air compressor, compressed air dryer and ancillary
equipment and parts of the above products.
ISO 9001:2015 Design, manufacture and after-sales service of air compressor, compressed air dryer and ancillary
equipment and parts of the above products.
CPR - CC - Atlas Copco Compressor AB ISO 14001:2015 Marketing, sales and service of air/gas compressors, Sickla Industriväg 19, 131 82 Nacka, Sweden generator sets, related accessories and aftermarket
products.
ISO 45001:2018 Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket
products.
ISO 9001:2015 Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket
products.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015
Copco China / Hong Kong Ltd. Beijing Regional Office Sales, commissioning and after-sales services of Atlas Rm. 601 6F, Silver Tower, 2#, East 3 Ring N. Rd, Chaoyang Copco equipment for industrial compressors, portable
compressors and generators. District 100027, Beijing, China
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 23 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015 Copco China / Hong Kong Ltd. Guangzhou Regional Office Sales, commissioning and after-sales services of Atlas
No 65, GuangPu xi Road, Guangzhou, Guangdong Province, Copco equipment for industrial compressors, portable
compressors and generators. China
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015 Copco China / Hong Kong Ltd. Chongqing Regional Office Sales, commissioning and after-sales services of Atlas
Room 2402, Huarun Building, Xie Jia Wan Zheng Street, Jiulong Copco equipment for industrial compressors, portable
compressors and generators. Po District 400050, Chongqing, China
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 24 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015
Copco China / Hong Kong Ltd. Head Office Sales, commissioning and after-sales services of Atlas Floor 12, Building 36, No. 1888, New Jinqiao Road, Shanghai Copco equipment for industrial compressors, portable
compressors and generators. 201206, China
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015
Copco China / Hong Kong Ltd. Shanghai Regional Office Sales, commissioning and after-sales services of Atlas Floor 12, Building 36, No. 1888, New Jinqiao Road, Shanghai Copco equipment for industrial compressors, portable
compressors and generators. 201206, China
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 25 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015 Copco China / Hong Kong Ltd. Hong Kong Regional Office Sales, commissioning and after-sales services of Atlas
Unit 1018, Tower 2, Grand Central Plaza, No. 138 Shatin Rural Copco equipment for industrial compressors, portable
compressors and generators. Committee Road, Shatin, NT, Hong Kong,
SAR, China
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015
Copco China / Hong Kong Ltd. Shenyang Regional Office Sales, commissioning and after-sales services of Atlas Door 2, 3rd Hunnan Road, Hunnan New District, Shenyang, Copco equipment for industrial compressors, portable
compressors and generators. Liaoning Province, China
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 26 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CQK - CC - Atlas Copco (Shanghai) Trading Co., Ltd. Atlas ISO 14001:2015
Copco China / Hong Kong Ltd. Xian Regional Office Sales, commissioning and after-sales services of Atlas Room 4815, Shang Yuan Road, Cao Tan Zone, Copco equipment for industrial compressors, portable Economic-Technological Development Area, Xian, Shanxi compressors and generators.
Province, China
ISO 45001:2018 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
ISO 9001:2015 Sales, commissioning and after-sales services of Atlas Copco equipment for industrial compressors, portable
compressors and generators.
CRP - PC - Atlas Copco Crépelle SAS ISO 14001:2015 Marketing, design, manufacturing, assembling, service of 2, Place Guy de Dampierre, 59008 Lille Cedex, air / gas compressors, air / gas treatment equipment, France assemblies and related products and services, under Atlas
Copco Brand as well as other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 27 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, design, manufacturing, assembling, service of air / gas compressors, air / gas treatment equipment, assemblies and related products and services, under Atlas
Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015 Marketing, design, manufacturing, assembling, service of air / gas compressors, air / gas treatment equipment, assemblies and related products and services, under Atlas
Copco Brand as well as other brands i.e. multi-brand.
CZI - CC - Atlas Copco s.r.o. Atlas Copco Central Region ISO 14001:2015 Marketing, sales, design and service of air/gas Prumyslová 1428/10, 10200 Hostivar, Prague, compressors, generator sets and related products and Czech Republic
services.
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
DFE - CC - ALUP Kompressoren GmbH ISO 9001:2015 Planning and sales of compressors, compressed air Ferdinand-Lassalle-Strasse 43, 72770 Reutlingen, Germany stations and accessories as well as sales of service
products and services for compressed air.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 28 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
DFS - CC - Atlas Copco Kompressoren und ISO 14001:2015
Drucklufttechnik GmbH Planning and sales of compressors, compressed air stations and accessories as well as sales of service Langemarckstrasse 35, 45141 Essen, Germany
products and services for compressed air.
ISO 45001:2018 Planning and sales of compressors, compressed air stations and accessories as well as sales of service
products and services for compressed air.
ISO 9001:2015 Planning and sales of compressors, compressed air stations and accessories as well as sales of service
products and services for compressed air.
DKA - CC - Atlas Copco Kompressorteknik A/S ISO 14001:2015 Sales and service of compressors, generator sets, Djursvang 5B, 2620 Albertslund, Denmark refrigerant dryers and related accessories and aftermarket
products.
ISO 45001:2018 Sales and service of compressors, refrigerant dryers, generator sets and related accessories and aftermarket
products.
ISO 9001:2015 Sales and service of compressors, generator sets, refrigerant dryers and related accessories and aftermarket
products.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 29 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
EGY - Atlas Copco Equipment S.A.E. CT Division ISO 14001:2015 1st industrial zone, Part 7, Block No 13024, El Obour, Cairo, Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas 11828, Egypt Copco equipment belonging to CT (IAT, OFA, CTS) & CR
(APW, CRS).
ISO 45001:2018 Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas Copco equipment belonging to CT (IAT, OFA, CTS) & CR
(APW, CRS).
ISO 9001:2015 Operations (marketing and sales), commissioning, after-sales services, maintenance and repairing of Atlas Copco equipment belonging to CT (IAT, OFA, CTS) & CR
(APW, CRS).
ENS - PC - Atlas Copco Energas GmbH ISO 14001:2015 Design, manufacture, in-house and field service of turbo Schlehenweg 15, 50999 Köln, Germany
machinery.
ISO 45001:2018 Design, manufacture, in-house and field service of turbo
machinery.
ISO 9001:2015 Design, manufacture, in-house and field service of turbo
machinery.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 30 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ESA - CC - Atlas Copco S.A.E. - Divisíon Compresores ISO 14001:2015 Avenida De José Gárate 3, Pol. Ind. de Coslada, 28823 Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related Coslada, Madrid, Spain
products and services.
ISO 45001:2018 Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related
products and services.
ISO 9001:2015 Marketing, sales and service of air/gas compressors, air/gas treatment equipment, generator sets, and related
products and services.
ESJ - CC - Aire Comprimido Industrial Iberia S.L. Customer ISO 14001:2015
Centers Multibrand CT Market and service activities for compressors, dryers,
Las Arenas, 6 - 8, “Pol. Industrial Las Arenas”, 28320 Pinto filters and ancillary equipment.
(Madrid), Alguer, 18 08830 Sant Boi de Llobregat (Barcelona),
Spain
ISO 45001:2018 Market and service activities for compressors, dryers,
filters and ancillary equipment.
ISO 9001:2015 Market and service activities for compressors, dryers,
filters and ancillary equipment.
FRA - CC - ABAC FRANCE SAS ISO 14001:2015 Marketing, sales, distribution, installation and service of 9 Rue Lavoisier, CS 80071 - ZI des Auréats,
air/gas compressors and air/gas treatment equipment. 26802 Portes les Valence Cedex, France
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 31 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution, installation and service of
air/gas compressors and air/gas treatment equipment.
ISO 9001:2015 Marketing, sales, distribution, installation and service of
air/gas compressors and air/gas treatment equipment.
FRB - CC - Multiair France ISO 14001:2015 Marketing, sales, distribution, installation and service of Parc des Ecouardes, 2, Rue Marie Sklodowska,
air/gas compressors and air/gas treatment equipment. 95150 Taverny, France
ISO 45001:2018 Marketing, sales, distribution, installation and service of
air/gas compressors and air/gas treatment equipment.
ISO 9001:2015 Marketing, sales, distribution, installation and service of
air/gas compressors and air/gas treatment equipment.
FRJ - PC - Atlas Copco Mobility Solutions Center ISO 14001:2015 Marketing, design, manufacturing of compressors, air Rue Pierre Curie 165, 60230 Chambly, France
treatment equipment and related products and services.
ISO 45001:2018 Marketing, design, manufacturing of compressors, air
treatment equipment and related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 32 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, design, manufacturing of compressors, air
treatment equipment and related products and services.
FRT - CC - Exlair ets Atep ISO 14001:2015 Sales, installation, service of air/gas compressors and Zac de la Robole - 100 Rue Paul Langevin,
air/gas treatment equipment. 13799 Aix en Provence, France
ISO 45001:2018 Sales, installation, service of air/gas compressors and
air/gas treatment equipment.
ISO 9001:2015 Sales, installation, service of air/gas compressors and
air/gas treatment equipment.
FRT - CC - Exlair ets Techfluid ISO 14001:2015 P.A. de la Plaine, 34 bis rue de la Distillerie, 59650 Sales, installation, service of air/gas compressors and
air/gas treatment equipment. Villeneuve-d'Ascq, France
ISO 45001:2018 Sales, installation, service of air/gas compressors and
air/gas treatment equipment.
ISO 9001:2015 Sales, installation, service of air/gas compressors and
air/gas treatment equipment.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 33 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
GBM - CC - ABAC UK ISO 45001:2018 Unit 5, Westway 21 Chesford Grange Warrington, Cheshire, Sales of Air/Gas Compressors, associated equipment and
spare parts, from all Brands of the Brand Portfolio. WA1 4SZ, United Kingdom
GBT - CC - Atlas Copco Ltd. ISO 14001:2015 Swallowdale Lane, Hemel Hempstead, Hertfordshire, HP2 7EA, The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated United Kingdom
equipment.
ISO 45001:2018 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
ISO 9001:2015 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
GBT - CC - Atlas Copco Ltd. Glasgow Branch Office ISO 14001:2015 1 Wilkie Court, Bothwell Park Industrial Estate, Glasgow, G71 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated 7ER, United Kingdom
equipment.
ISO 45001:2018 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 34 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
GBT - CC - Atlas Copco Ltd. Kettering Branch Office ISO 14001:2015 The design, manufacture, service, maintenance and repair Cunliffe Drive, Kettering, NN16 8LD, of portable and installed air compressors and associated United Kingdom
equipment.
ISO 45001:2018 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
ISO 9001:2015 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
GBT - CC - Atlas Copco Ltd. Leigh Branch Office ISO 14001:2015 The design, manufacture, service, maintenance and repair Unit 10, Commonwealth Close, Leigh, WN7 3BD, of portable and installed air compressors and associated United Kingdom
equipment.
ISO 45001:2018 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 35 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 The design, manufacture, service, maintenance and repair of portable and installed air compressors and associated
equipment.
GBV - Atlas Copco Medical Ltd ISO 14001:2015 Telford Crescent Speedwell, Industrial Estate, Staveley, S43 Design, Engineering, manufacture, sales and service of
Medical Gas equipment. 3PF, United Kingdom
ISO 45001:2018 Design, Engineering, manufacture, sales and service of
Medical Gas equipment.
ISO 9001:2015 Design, Engineering, manufacture, sales and service of
Medical Gas equipment.
GCH - PC - Atlas Copco Ltd. Trading as ISO 14001:2015
EngineeredSolutions Marketing, design, sales, manufacturing, distribution, Swallowdale Lane, Hemel Hempstead, Hertfordshire, HP2 7EA, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas United Kingdom
treatment equipment and air management systems.
ISO 45001:2018 Marketing, design, sales, manufacturing, distribution, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas
treatment equipment and air management systems.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 36 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, design, sales, manufacturing, distribution, assembling, and installation of industrial compressors, gas and process compressors and expanders, air and gas
treatment equipment and air management systems.
GRG - CC - Atlas Copco Hellas A.E. ISO 14001:2015 Marketing, sales, design and service of air/gas 82, Varis Koropiou Av., 19400 Koropi, Athens, compressors, generator sets and related products and Greece
services.
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
HOY - CC - Atlas Copco Compressors LLC Central Regional ISO 14001:2015
Office Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen 2501 Landmeier Road, Elk Grove Village, IL, Generators, Air Treatment equipment, Vacuum Pumps 60007, United States
and related services and parts.
ISO 45001:2018 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 37 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
HOY - CC - Atlas Copco Compressors LLC Eastern ISO 14001:2015
Regional Office Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen 92 Interstate Dr., West Springfield, MA, 01089, Generators, Air Treatment equipment, Vacuum Pumps United States
and related services and parts.
ISO 45001:2018 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
ISO 9001:2015 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
HOY - CC - Atlas Copco Compressors LLC Southern ISO 14001:2015
Regional Office Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen 15045 Lee Road, Houston, TX, 77032, Generators, Air Treatment equipment, Vacuum Pumps United States
and related services and parts.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 38 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
ISO 9001:2015 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
HOY - CC - Atlas Copco Compressors LLC Western ISO 14001:2015
Regional Office Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen 48434 Milmont Drive, Fremont, CA, 94538, Generators, Air Treatment equipment, Vacuum Pumps United States
and related services and parts.
ISO 45001:2018 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
ISO 9001:2015 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 39 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
HOY - CC - Atlas Copco Compressors LLC, Corporate office ISO 14001:2015
300 Technology Center Way, Suite 550, Rock Hill, SC, 29730, Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen United States Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
ISO 45001:2018 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
ISO 9001:2015 Marketing, sales, installation of Oil-Free Air compressors, Oil-Injected Air compressors, Air Blowers, Nitrogen Generators, Air Treatment equipment, Vacuum Pumps
and related services and parts.
HUN - CC - Atlas Copco Hungary Kft. ISO 14001:2015 Marketing, sales, design and service of air/gas Áti-Sziget Ipari Park 72-73, 2310 Szigetszentmiklós, Hungary compressors, generator sets and related products and
services.
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 40 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
INE - Global Engineering Centre India Airpower (GECIA) ISO 14001:2015 Survey No. 247/2, Near Yes Bank, Next to Bharat Petrol Pump, Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Hinjewadi, Pune, 411057, India Flow calculations of components. Design of control system. Preparation of Technical literature and
documentation services.
ISO 45001:2018 Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Flow calculations of components. Design of control system. Preparation of Technical literature and
documentation services.
ISO 9001:2015 Provision of following services to Atlas Copco Compressor Technique. Business Area Design, Stress analysis and Flow calculations of components. Design of control system. Preparation of Technical literature and
documentation services.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 B-503/504, West Gate, Near YMCA Club, S.G. Highway, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Ahmedabad, Gujarat, 380015, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 41 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 1A, 5th Floor, Kushal Garden Arcade, Peenya Industrial Area, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Phase II, Bangalore, 560058, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 C/O Chakan Logistics Park Pvt Ltd., Gat No 357, Plot No 38, 40, Design, Manufacture, Assembly of oil Injected screw, Oil 41, 42, 43 and 44, Ambethan Road, Village - Kharabwadi, free screw, Air/Gas reciprocating and centrifugal Taluka - Khed, Chakan, District - Pune, Maharashtra, 410501, Compressors, Dryers and Airline accessories.
India
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 42 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 SCO - 811, First Floor, NAC, Manimajra, Chandigarh, (U.T.), Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal 160101, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 Unitech Business Park, Tower A, Block - F, Sector - 41, South Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal City - 1, Gurgaon, 122001, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 43 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 No 8B, 8th Floor, 1-10-39 to 44, Gumidelli Towers, Begumpet, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Main Road, Hyderabad, 500016, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 Sveanagar, Mumbai-Pune Rd., Dapodi, Pune Maharashtra, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal 411012, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 44 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 8th Floor, Shyamala Tower, 136, Arcot Road, Saligramam, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Chennai, 600093, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 7th Floor, Wework, Zenia Building, Hiranandani Circle, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Hiranandani Business Park, Thane, Maharashtra, 400607, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 45 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INK - CC - Atlas Copco (India) Ltd ISO 14001:2015 Merlin Acropolis, 14th Floor, Office Unit No. 15/3, 1858/1, Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal Rajdanga Main Road, West Bengal, Kolkata, 700107, India
Compressors, Dryers and Airline accessories.
ISO 45001:2018 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil Injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
INO - CC - Chicago Pneumatic Compressors ISO 14001:2015 #8B, 8th Floor, 1-1039 to 64, Gumidelli Towers, Begumpet, Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and Hyderabad, 500016, India
dryers.
ISO 45001:2018 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 46 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
INO - CC - Chicago Pneumatic Compressors ISO 14001:2015 Sales and servicing of reciprocating air/gas compressors, Sveanagar, Mumbai-Pune Road, Pune, Maharastra, oil injected screw compressors, airline accessories and 411012, India
dryers.
ISO 45001:2018 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
ISO 9001:2015 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
INO - CC - Chicago Pneumatic Compressors ISO 14001:2015 Merlin Acropolis, 14th Floor, Office Unit No. 15/3, 1858/1, Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and Rajdanga Main Road, West Bengal, Kolkata, 700107, India
dryers.
ISO 45001:2018 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 47 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Sales and servicing of reciprocating air/gas compressors, oil injected screw compressors, airline accessories and
dryers.
ITJ - PC - Ceccato Aria Compressa S.R.L. C.ARIA C. S.R.L. ISO 14001:2015
Design, manufacture and servicing of air compressors, air Via Soastene 34, 36040 Brendola (Vicenza), dryers, air filters, blowers, assemblies and related Italy
products.
ISO 45001:2018 Design, manufacture and servicing of air compressors, air dryers, air filters, blowers, assemblies and related
products.
ISO 9001:2015 Design, manufacture and servicing of air compressors, air dryers, air filters, blowers, assemblies and related
products.
ITQ - CC - MultiAir Italia SRL representing ABAC, Ceccato ISO 14001:2015
and Worthington Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, Via Galilei Galileo 40, 20092 Cinisello Balsamo - Milano, Italy expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 48 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ISO 9001:2015 Marketing, sales, design, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and
related products and services.
ITR - PC - Atlas Copco ABAC Aria Compressa – AARIAC ISO 14001:2015
S.r.l Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative Via Cristoforo Colombo 3, 10070 Robassomero (Torino), Italy
screw electro compressors.
ISO 45001:2018 Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative
screw electro compressors.
ISO 9001:2015 Design, manufacture, sales and service of electro compressors, alternative pistons compressors and rotative
screw electro compressors.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 49 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
IYA - CC - Atlas Copco Italia S.p.A. Div. Compressori ISO 14001:2015 Marketing, sales, design, manufacturing, distribution, Via Galilei Galileo, 40, 20092 Cinisello Balsamo - Milano, Italy assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand
Portfolio.
ISO 45001:2018 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand
Portfolio.
ISO 9001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other Brands from the Brand
Portfolio.
JPP - CC - Atlas Copco KK Compressor Technique ISO 14001:2015
Business Area Sales and Distribution of compressed air assemblies and
Sumitomo Fudosan Onarimon Tower 8F 1-1-1 Shibakoen, aftermarket business.
Minato-ku, Tokyo 105-0011, Japan
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 50 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales and Distribution of compressed air assemblies and
aftermarket business.
ISO 9001:2015 Sales and Distribution of compressed air assemblies and
aftermarket business.
JPP - CC - Atlas Copco KK Compressor Technique ISO 14001:2015
Kawasaki Office Sales and Distribution of compressed air assemblies and
aftermarket business. 16-1, Higashi Ohgishima, Kawasaki-ku,
Kanagawa-Ken 210-0869, Japan
ISO 45001:2018 Sales and Distribution of compressed air assemblies and
aftermarket business.
ISO 9001:2015 Sales and Distribution of compressed air assemblies and
aftermarket business.
KEN - CC - Atlas Copco Eastern Africa Customer Center ISO 14001:2015
LTD Marketing, sales, distribution, installation and service of Airport North Road, Embakasi, Nairobi, P.O. Box 40090, 00100, air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment Kenya equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 51 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
KRC - Atlas Copco Korea Co., Ltd. CT Head Office ISO 14001:2015 6-9 Fl. Yemizi Bldg, 14-1, Pangyoyeok-ro 192 beon-gil, Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas Bundang-gu, Seongnam-si, Gyeonggi-do, compressors, blowers, expanders, turbo machinery, Republic of Korea vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
ISO 45001:2018 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 52 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
KRC - CC - Atlas Copco Korea Co., Ltd. CT Yongin Branch ISO 14001:2015
Office Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas 22-10, Jubuk-ro 173beon-gil, Yonging-si, compressors, blowers, expanders, turbo machinery, Gyeonggi-do 449-935, Republic of Korea vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
ISO 45001:2018 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
ISO 9001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 53 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
MXA - CC - Atlas Copco Mexicana S.A de C.V. Área de ISO 14001:2015
Negocios Compresores Marketing, sales, design, manufacturing, distribution, Blvrd. Abraham Lincoln No 13, Los Reyes Zona Industrial C.P, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, 54073 Tlalnepantla de Baz, Estado de México, Mexico vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under
Atlas Copco Brand.
ISO 45001:2018 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under
Atlas Copco Brand.
ISO 9001:2015 Marketing, sales, design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under
Atlas Copco Brand.
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) Head ISO 14001:2015
Office Marketing, sales, distribution and service of compressors 26, Jalan Anggerik Mokara 31/47, Kota Kemuning, Seksyen 31, and ancillary equipment and installations of associated
services. 40460 Shah Alam, Selangor, Malaysia
ISO 45001:2018 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 54 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) ISO 14001:2015
Johor Bahru Branch Office Marketing, sales, distribution and service of compressors No. 1 Jalan Tiong Emas 1, Kawasan Perindustrian Tiong Nam, and ancillary equipment and installations of associated
services. 81100 Johor Bahru, Johor, West Malaysia,
Malaysia
ISO 45001:2018 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
ISO 9001:2015 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
MYS - CC - Atlas Copco (Malaysia) Sdn Bhd (87259-U) ISO 14001:2015
Penang Branch Office Marketing, sales, distribution and service of compressors No. 531 & 533, Jalan Masjid Negeri, 11600 Penang, West and ancillary equipment and installations of associated
services. Malaysia, Malaysia
ISO 45001:2018 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 55 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
NFA - CC - Oy Atlas Copco Kompressorit Ab ISO 14001:2015 Marketing, sales and service of air/gas compressors, Itäinen Valkoisenlähteentie 14A, 01380 Vantaa,
generator sets, related accessories and aftermarket. Finland
ISO 45001:2018 Marketing, sales and service of air/gas compressors,
generator sets, related accessories and aftermarket.
ISO 9001:2015 Marketing, sales and service of air/gas compressors,
generator sets, related accessories and aftermarket.
NLA - CC - Atlas Copco Internationaal B.V. Atlas Copco ISO 14001:2015
Compressors Nederland Marketing, sales, design and service of air/gas compressors, generator sets and related products and Merwedeweg 7, 3336 LG Zwijndrecht,
services. The Netherlands
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 56 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
NLC - CC - Creemers Compressors B.V. ISO 14001:2015
Sales, installation and maintenance of air compressors. Galliërsweg 27, 5349 AT Oss, The Netherlands
ISO 45001:2018
Sales, installation and maintenance of air compressors.
NLK - CC - Alup-Grassair Kompressoren B.V. ISO 14001:2015 Sales and service of compressors, generator sets, related Galliërsweg 27, 5349 AT Oss, The Netherlands
accessories and aftermarket products.
ISO 45001:2018 Sales and service of compressors, generator sets, related
accessories and aftermarket products.
ISO 9001:2015 Sales and service of compressors, generator sets, related
accessories and aftermarket products.
NLY - PC - Atlas Copco Internationaal B.V. / Atlas Copco ISO 14001:2015
EngineeredSolutions Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas Technologieweg 19, 4906 AC Oosterhout, purification, nitrogen generation, oxygen generation and The Netherlands
associated products.
ISO 45001:2018 Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas purification, nitrogen generation, oxygen generation and
associated products.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 57 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Sales, design, engineering, procurement, manufacturing, supply and servicing customized and engineered gas purification, nitrogen generation, oxygen generation and
associated products.
NNA - CC - Atlas Copco Kompressorteknikk AS ISO 14001:2015 Marketing, sales ,design, manufacturing, distribution, Berghagan, Industy Omrade, 1405 Langhus, assembling, installation and service of air / gas Norway compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
ISO 45001:2018 Marketing, sales ,design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
ISO 9001:2015 Marketing, sales ,design, manufacturing, distribution, assembling, installation and service of air / gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air / gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as other brands from the Brand
Portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 58 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
NZA - CC - Atlas Copco New Zealand Limited ISO 14001:2015 8 George Bourke Drive, Mount Wellington, Auckland, 1060, New Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division, Zealand
Oil Free Air Division and Quality Air Division.
ISO 45001:2018 Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division,
Oil Free Air Division and Quality Air Division.
ISO 9001:2015 Sales and service. Product portfolio of CT Business Area. This includes Industrial Air Division, CT Service Division,
Oil Free Air Division and Quality Air Division.
PHI - CC - Atlas Copco (Philippines), Inc. ISO 14001:2015 North Main Avenue, Lot 12, Block 2, Laguna Technopark, 4024 Marketing, sales and service of air/gas compressors and
generator sets. Biñan, Laguna, Philippines
ISO 45001:2018 Marketing, sales and service of air/gas compressors and
generator sets.
ISO 9001:2015 Marketing, sales and service of air/gas compressors and
generator sets.
PKA - CC - Atlas Copco Pakistan (Pvt.) Limited ISO 14001:2015 588, Block H3, Abdul Haque Road, Opposite Emporium Mall, Marketing, sales and aftermarket services of products
under Atlas Copco brand as well as other brands. Johar Town, Lahore, Pakistan
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 59 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales and aftermarket services of products
under Atlas Copco brand as well as other brands.
ISO 9001:2015 Marketing, sales and aftermarket services of products
under Atlas Copco brand as well as other brands.
PLK - CC - Atlas Copco Polska Sp. z.o.o. ISO 14001:2015 Marketing, sales and service of air/gas compressors, UL. Badylarska 25, 02-484 Warszawa, Poland generator sets, related accessories and aftermarket
products.
ISO 45001:2018 Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket
products.
ISO 9001:2015 Marketing, sales and service of air/gas compressors, generator sets, related accessories and aftermarket
products.
PNB - PC - Atlas Copco Product Company Pune - Dapodi ISO 14001:2015
Plant Design, Manufacture, Assembly of oil injected screw, Oil Sveanagar, Bombay Pune Rd., Dapodi, Pune, Maharashtra, free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories. 411012, India
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 60 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Design, Manufacture, Assembly of oil injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
ISO 9001:2015 Design, Manufacture, Assembly of oil injected screw, Oil free screw, Air/Gas reciprocating and centrifugal
Compressors, Dryers and Airline accessories.
PNE - PC - Atlas Copco Product Company - Chakan Plant ISO 14001:2015 S. No.65/2B, Gat No.133, 134/1, 134/2, 139, 141, 145, 146, Design, manufacture, assembly of oil injected screw, air Village Mahalunge, Taluka Khed, Pune, Maharashtra, 410501, compressors, dryers and Generator set.
India
ISO 45001:2018 Design, manufacture, assembly of oil injected screw, air
compressors, dryers and Generator set.
ISO 9001:2015 Design, manufacture, assembly of oil injected screw, air
compressors, dryers and Generator set.
PNF - PC - Atlas Copco (India) Ltd / Gas and Process ISO 14001:2015
Application Design, manufacture, packaging, sales and service of Gas
Block D/1, Plot No 24, MIDC, Opposite Bird Valley Garden, and Process compressors and expanders.
Telco Road, Chinchwad, Pune, Maharashtra 411019, India
ISO 45001:2018 Design, manufacture, packaging, sales and service of Gas
and Process compressors and expanders.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 61 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, manufacture, packaging, sales and service of Gas
and Process compressors and expanders.
PRA - CC - Sociedade Atlas Copco de Portugal Unipessoal ISO 14001:2015
Lda - CT Division Branch office Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories Rua Eng. Ferreira Dias, 1101, 4100-247 Porto,
and compressed air assemblies. Portugal
ISO 45001:2018 Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories
and compressed air assemblies.
ISO 9001:2015 Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories
and compressed air assemblies.
PRA - CC - Sociedade Atlas Copco de Portugal Unipessoal ISO 14001:2015
Lda-CT Division Import, trade, rent, installation and servicing of Lagoas Parque Edifício 15 piso 0, 2740-265 Porto Salvo, compressed air equipment, generators and accessories
and compressed air assemblies. Portugal
ISO 45001:2018 Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories
and compressed air assemblies.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 62 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Import, trade, rent, installation and servicing of compressed air equipment, generators and accessories
and compressed air assemblies.
ROF - CC - Atlas Copco Romania Srl ISO 14001:2015 Sos,Bucuresti-Ploiesti Km 13,2, 075100 Bucharest (Otopeni Marketing, sales, design and service of air/gas compressors, generator sets and related products and Iilofov), Romania
services.
ISO 45001:2018 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
ISO 9001:2015 Marketing, sales, design and service of air/gas compressors, generator sets and related products and
services.
RSB - CC - Atlas Copco Srbija doo ISO 14001:2015 Marketing, sales, distribution, installation and service of Milutina Milankovica 23, Belgrade, 11070, air/gas compressors, blowers, expanders, turbo Serbia machinery, vacuum pumps and air/gas treatment
equipment.
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps and air/gas treatment
equipment.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 63 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps and air/gas treatment
equipment.
RUA - CC - JSC Atlas Copco, CT Division - North-West ISO 14001:2015
Regional Office Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation. 10/1, Oktyabrskaya emb, St. Petersburg, 193091,
Russian Federation
ISO 45001:2018 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
ISO 9001:2015 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
RUA - CC - JSC Atlas Copco, CT Division - Siberian and Far ISO 14001:2015
East Regional Office Sales and service of Atlas Copco compressors and related
bldg. 4, 15, Krivoschekovskaya Str., Novosibirsk, 630007, equipment in the Russian Federation.
Russian Federation
ISO 45001:2018 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
ISO 9001:2015 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 64 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
RUA - CC - JSC Atlas Copco, CT Division - URAL - VOLGA ISO 14001:2015
Regional Office Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation. bldg. 4, 12, Sibirskiy highway, Yekaterinburg,
Russian Federation
ISO 45001:2018 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
ISO 9001:2015 Sales and service of Atlas Copco compressors and related
equipment in the Russian Federation.
RUA - CC - JSC Atlas Copco, CT Division, Head Office ISO 14001:2015 Sales and service of Atlas Copco compressors, vacuum 15 Vashutinskoe Road, Khimki, Moscow, 141402, pumps and systems and related equipment in the Russian Russian Federation
Federation.
ISO 45001:2018 Sales and service of Atlas Copco compressors, vacuum pumps and systems and related equipment in the Russian
Federation.
ISO 9001:2015 Sales and service of Atlas Copco compressors, vacuum pumps and systems and related equipment in the Russian
Federation.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 65 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
SAA - CC - Atlas Industrial Equipment Co. ISO 14001:2015 7th Floor, Room 706 and 707, Falastein Street, Al Rehab Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment District, Jeddah, 21462, Saudi Arabia equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 45001:2018 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 9001:2015 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
SAA - CC - Atlas Industrial Equipment Co. AL-Khobar ISO 14001:2015
Regional Office Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment Dammam. Khobar Highway, Al-Khobar, 31952, equipment, vacuum pumps, generators sets, gas and Saudi Arabia process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 66 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 9001:2015 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
SAA - CC - Atlas Industrial Equipment Co. Jubail Regional ISO 14001:2015
Office Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment Second Support Industries - Road 116, equipment, vacuum pumps, generators sets, gas and Jubail Industrial City, Saudi Arabia process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 45001:2018 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 67 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
SAA - CC - Atlas Industrial Equipment Co. Riyadh Regional ISO 14001:2015
Office Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment Khurais Highway Olayan Complex, Riyadh, 11421, equipment, vacuum pumps, generators sets, gas and Saudi Arabia process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 45001:2018 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 9001:2015 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 68 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
SAA - CC - Atlas Industrial Equipment Co. Safat Regional ISO 14001:2015
Office Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment P.O. Box: 1096, Safat, East Ahmadi, 13011, equipment, vacuum pumps, generators sets, gas and Kuwait process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 45001:2018 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
ISO 9001:2015 Marketing, sales, distribution, installation and service of industrial air/gas compressors, air/gas treatment equipment, vacuum pumps, generators sets, gas and process compressors and expansion turbines, cryogenic pumps and related products and services under Atlas Copco Brand as well as other Brands from the Brand
portfolio.
SGC - CC - Atlas Copco (South-East Asia) Pte Ltd ISO 14001:2015 Marketing, sales, distribution and service of compressors 25 Tuas Avenue 2, Singapore 639456, Singapore and ancillary equipment and installations of associated
services.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 69 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
ISO 9001:2015 Marketing, sales, distribution and service of compressors and ancillary equipment and installations of associated
services.
SKD - CC - Atlas Copco s.r.o. ISO 14001:2015 Sales of Air / Gas Compressors, associated equipment Elektrárenská 4 831 04 Bratislava, Slovakia
and spare parts Atlas Copco Brand.
ISO 45001:2018 Sales of Air / Gas Compressors, associated equipment
and spare parts Atlas Copco Brand.
ISO 9001:2015 Sales of Air / Gas Compressors, associated equipment
and spare parts Atlas Copco Brand.
TBI - PC - Atlas Copco Comptec LLC ISO 14001:2015 Design, manufacture, test and service of compressors and 46 School Road, Voorheesville, NY, 12186-9698,
ancillary equipment and components. United States
ISO 45001:2018 Design, manufacture, test and service of compressors and
ancillary equipment and components.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 70 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design, manufacture, test and service of compressors and
ancillary equipment and components.
TBI - PC - Atlas Copco Service Center North America ISO 14001:2015 Design, manufacture, test and service of compressors and 950 Hall Court Deer Park, Houston, TX 77536,
ancillary equipment and components. United States
ISO 45001:2018 Design, manufacture, test and service of compressors and
ancillary equipment and components.
ISO 9001:2015 Design, manufacture, test and service of compressors and
ancillary equipment and components.
TRT - CC - Atlas Copco Makinalari Imalat A.Ş. ISO 14001:2015 Sales, marketing and service of stationary compressors İstasyon Mah. İbişağa Cad No.6, 34940 Tuzla-Istanbul, Turkey
and accessories.
ISO 45001:2018 Sales, marketing and service of stationary compressors
and accessories.
ISO 9001:2015 Sales, marketing and service of stationary compressors
and accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 71 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
TWN - CC - Atlas Copco Taiwan Ltd. ISO 14001:2015 No. 38, Alley 31, Lane 236, Heping Road, Yangmei District, Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, Taoyuan City 32647, Taiwan vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 45001:2018 Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015 Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
TWN - CC - Atlas Copco Taiwan Ltd. Kaohsiung Branch ISO 14001:2015
Office Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, No. 75, Jingzhang 3rd Street, Renwu District, vacuum pumps, air/gas treatment equipments, generator Kaohsiung City 814 814, Taiwan sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 72 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
ISO 9001:2015 Sales, distribution, installation & service of air/gas compressors, blowers, expanders, turbo machinery, vacuum pumps, air/gas treatment equipments, generator sets, assemblies and related products and services, under
Atlas Copco Brand as well as other brands i.e. multi-brand.
USZ - DC - Atlas Copco LLC North America Service Center ISO 14001:2015
Distribution of air compressors, air treatment equipment, 11313 Steele Creek Road, Charlotte, NC, 28273,
generator sets and related accessories and spares. United States
ISO 45001:2018 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
ISO 9001:2015 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
USZ - DC - Atlas Copco LLC North America Service Center ISO 14001:2015
2nd facility: Charlotte Distribution of air compressors, air treatment equipment,
2101 - C&D Westinghouse Boulevard, Charlotte, NC, 28273, generator sets and related accessories and spares.
United States
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 73 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
ISO 9001:2015 Distribution of air compressors, air treatment equipment,
generator sets and related accessories and spares.
UTB - PC - Atlas Copco Mafi-Trench Company LLC ISO 14001:2015 Design, Development, Manufacturing and service of Turbo 3037 Industrial Parkway, Santa Maria,
Expanders. CA 93455-1807, United States
ISO 45001:2018 Design, Development, Manufacturing and service of Turbo
Expanders.
ISO 9001:2015 Design, Development, Manufacturing and service of Turbo
Expanders.
UTF - PC - Atlas Copco Houston Product Company ISO 14001:2015 Design and fabrication of custom and standard packaged 15045 Lee Road, Houston, TX, 77032, compressed air systems for demanding applications in United States energy, industrial power and petrochemical markets
worldwide.
ISO 45001:2018 Design and fabrication of custom and standard packaged compressed air systems for demanding applications in energy, industrial power and petrochemical markets
worldwide.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 74 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Design and fabrication of custom and standard packaged compressed air systems for demanding applications in energy, industrial power and petrochemical markets
worldwide.
UTH - CC - Quincy Compressor LLC ISO 14001:2015 Marketing, Sales, Distribution, installation and service of 701 Dobson Avenue, AL 36507, United States Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the
Brand Portfolio.
ISO 45001:2018 Marketing, Sales, Distribution, installation and service of Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the
Brand Portfolio.
ISO 9001:2015 Marketing, Sales, Distribution, installation and service of Air/Gas compressors, Blowers, Vacuum Pumps, Air / Gas treatment Equipment, Assemblies and Related Products and Services under Quincy Brand and all Brands from the
Brand Portfolio.
UTR - CC - Atlas Copco Medical Products Beacon Medaes ISO 14001:2015
Design, manufacture, sales and service of medical air 1059 Paragon Way, Rock Hill 111, SC, 29730, products, medical vacuum systems, manifolds and United States
pipeline components for use in medical facilities.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 75 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Design, manufacture, sales and service of medical air products, medical vacuum systems, manifolds and
pipeline components for use in medical facilities.
ISO 9001:2015 Design, manufacture, sales and service of medical air products, medical vacuum systems, manifolds and
pipeline components for use in medical facilities.
UTX - CC - Atlas Copco Compressors LLC, Edmac ISO 14001:2015 Supplier of parts, accessories and consumables for air 2101 Westinghouse Blvd, Suite D, Charlotte, NC,
compressors, blowers and vacuum pumps. 28273, United States
ISO 45001:2018 Supplier of parts, accessories and consumables for air
compressors, blowers and vacuum pumps.
ISO 9001:2015 Supplier of parts, accessories and consumables for air
compressors, blowers and vacuum pumps.
UTY - PC - Quincy Compressor LLC ISO 14001:2015 Design, Manufacturing, Assembling of Air / Gas 701 Dobson Avenue, Bay Minette, AL, 36507, Compressors, Vacuum Pumps, Air/ Gas, Assemblies and United States Related Products and Services under Quincy Brand and
all Atlas Copco Multi-Brands.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 76 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Design, Manufacturing, Assembling of Air / Gas Compressors, Vacuum Pumps, Air/ Gas, Assemblies and Related Products and Services under Quincy Brand and
all Atlas Copco Multi-Brands.
ISO 9001:2015 Design, Manufacturing, Assembling of Air / Gas Compressors, Vacuum Pumps, Air/ Gas, Assemblies and Related Products and Services under Quincy Brand and
all Atlas Copco Multi-Brands.
UVC (CR) - Atlas Copco Compressors LLC ISO 14001:2015 Assembly and test of compressor and generator products 1059 Paragon Way, Rock Hill, SC, 29730, along with the distribution of industrial compressors, oil United States
free compressors, parts and service items.
ISO 45001:2018 Assembly and test of compressor and generator products along with the distribution of industrial compressors, oil
free compressors, parts and service items.
ISO 9001:2015 Assembly and test of compressor and generator products along with the distribution of industrial compressors, oil
free compressors, parts and service items.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 77 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
VNE - CC - Atlas Copco Vietnam Co., Ltd. Binh Duong ISO 14001:2015
Branch Office Sales, design, supply and installation of industrial Lof F, road 12, Song Than IZ2, Di An District Binh Duong compressors (including air and gas treatment equipment and air management systems), generators, medical gas Province, Vietnam pipeline equipment and accessories; and aftermarket
(including service and spare part) for equipment.
ISO 45001:2018 Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories; and aftermarket
(including service and spare part) for equipment.
ISO 9001:2015 Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories; and aftermarket
(including service and spare part) for equipment.
VNE - CC - Atlas Copco Vietnam Co., Ltd. Head Office ISO 14001:2015 Sales, design, supply and installation of industrial 1st fl., Simco Building, 28 Pham Hung Road, compressors (including air and gas treatment equipment Tu Liem district Hanoi, Vietnam and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket
(including service and spare part) for equipment.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 78 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket
(including service and spare part) for equipment.
ISO 9001:2015 Sales, design, supply and installation of industrial compressors (including air and gas treatment equipment and air management systems), generators, medical gas pipeline equipment and accessories ; and aftermarket
(including service and spare part) for equipment.
WUX - PC - Atlas Copco (Wuxi) Compressor Co., Ltd. (Plant ISO 14001:2015
I) Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, No. 22 Changjiang Road, New District, Wuxi, vacuum pumps, desiccant compressed air dryers, Jiangsu 214028, China compressed air filters, auxiliary equipment and
accessories.
ISO 45001:2018 Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and
accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 79 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and
accessories.
WUX - PC - Atlas Copco (Wuxi) Compressor Co., Ltd. (Plant ISO 14001:2015
II) Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, No. 45 Ximei Road, New District, Wuxi, vacuum pumps, desiccant compressed air dryers, Jiangsu 214028, China compressed air filters, auxiliary equipment and
accessories.
ISO 45001:2018 Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and
accessories.
ISO 9001:2015 Marketing, design and manufacture of air and gas screw, reciprocating and centrifugal compressors and blowers, vacuum pumps, desiccant compressed air dryers, compressed air filters, auxiliary equipment and
accessories.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 80 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd ISO 14001:2015 Marketing, sales, distribution, installation and service of 10 Innes Road, Jet Park, Boksburg, Gauteng, air/gas compressors, blowers, expanders, medical gases, South Africa turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Cape Town ISO 14001:2015
office Marketing, sales, distribution, installation and service of Unit 6, Jarin Park, 3 Dawn Road, Montague Gardens, Cape air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment Town, South Africa equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 81 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Durban ISO 14001:2015
office Marketing, sales, distribution, installation and service of 47 Gillits Road, Unit D7 Pinemead Industrial Park, Westmead air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment Durban, South Africa equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 82 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ZAA - CC - Atlas Copco Industrial SA (Pty) Ltd, Port ISO 14001:2015
Elizabeth office Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, 41B 5th Avenue, Newton Park, Port Elizabeth, turbo machinery, vacuum pumps and air/gas treatment South Africa equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 45001:2018 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
ISO 9001:2015 Marketing, sales, distribution, installation and service of air/gas compressors, blowers, expanders, medical gases, turbo machinery, vacuum pumps and air/gas treatment equipment, generator sets, assemblies and related products and services, under Atlas Copco Brand as well as
other brands i.e. multi-brand.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 83 of 84
Certificate identity number: 10290211
Certificate Schedule
Location Activities
ZDI - CC - Atlas Copco (Thailand) Ltd. ISO 14001:2015 125 Moo Wellgrow Industrial Estate, Bangna-Trad rd. km 36, Sales and service of compressors, generator sets, related
accessories and aftermarket products. Bangwua Bangpakong, Chachoengsao, 24130,
Thailand
ISO 45001:2018 Sales and service of compressors, generator sets, related
accessories and aftermarket products.
ISO 9001:2015 Sales and service of compressors, generator sets, related
accessories and aftermarket products.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register EMEA, Jan Van Gentstraat 7 (bus 202) 2000 Antwerp Belgium for and on behalf of: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page 84 of 84