Foreword

Welcome to the growing family of new tenance requirements, assisting you in the MODIFICATION OF YOUR NISSAN owners. This vehicle is delivered to safe operation of your vehicle. VEHICLE you with confidence. It was produced using the latest techniques and strict quality control. This vehicle should not be modified. Modi- WARNING fication could affect its performance, This manual was prepared to help you under- safety or durability, and may even violate stand the operation and maintenance of your IMPORTANT SAFETY INFORMA- governmental regulations. In addition, vehicle so that you may enjoy many miles of TION damage or performance problems result- driving pleasure. Please read through this REMINDERS FOR SAFETY! ing from modification may not be covered manual before operating your vehicle. under NISSAN warranties. Follow these important driving rules to A separate Warranty Information and Main- help ensure a safe and comfortable trip WHEN READING THE MANUAL tenance Log Booklet (in U.S.), Warranty for you and your passengers! and Roadside Assistance Information This manual includes information for all booklet (in Canada) explains details about ¼ Never drive under the influence of al- options available on this model. Therefore, the warranties covering your vehicle and cohol or drugs. you may find some information that does not apply to your vehicle. vehicle maintenance schedules. Addition- ¼ Always observe posted speed limits ally, a separate Customer Care/Lemon Law and never drive too fast for condi- All information, specifications and illustrations Booklet (U.S. only) will explain how to tions. in this manual are those in effect at the time of resolve any concerns you may have with printing. NISSAN reserves the right to change your vehicle, as well as clarify your rights ¼ Always use your seat belts and appro- specifications or design at any time without under your state’s lemon law. priate child restraint systems. Preteen notice. Your NISSAN dealer knows your vehicle best. children should be seated in the rear When you require any service or have any seat. questions, he will be glad to assist you with ¼ Always provide information about the the extensive resources available to him. proper use of vehicle safety features READ FIRST — THEN DRIVE to all occupants of the vehicle. SAFELY ¼ Always review this Owner’s Manual Before driving your vehicle please read for important safety information. your Owner’s Manual carefully. This will ensure familiarity with controls and main-

੬ 00.1.17/A33-D/V5.0 ੭ IMPORTANT INFORMATION CALIFORNIA PROPOSITION 65 ABOUT THIS MANUAL WARNING You will see various symbols in this manual. They are used in the following ways: WARNING

Engine Exhaust, some of its constitu- WARNING ents, and certain vehicle components contain or emit chemicals known to State This is used to indicate the presence of a of California to cause cancer and birth hazard that could cause death or serious defects or other reproductive harm. personal injury. To avoid or reduce the risk, the procedures must be followed precisely.

SIC0697 CAUTION If you see this symbol, it means Do not do this or Do not let this happen. This is used to indicate the presence of a hazard that could cause minor or moder- ate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

© 2000 NISSAN MOTOR CO., LTD. TOKYO, JAPAN All rights reserved. No part of this Owner’s Manual may be reproduced or stored in a retrieval system, or trans- mitted in any form, or by any means, electronic, me- chanical, photocopying, recording or otherwise, without the prior written permission of Nissan Motor Co., Ltd.

੬ 00.1.17/A33-D/V5.0 ੭ Welcome To The World Of NISSAN

portation services to the supply of lubricants, parts and accessories. NISSAN pioneered the use of electronics and computers in automobiles, and has led the indus- try in improving both performance and fuel effi- ciency through new engine designs and the use of synthetic materials to reduce vehicle weight. The company has also developed ways to build quality into its vehicles at each stage of the production process, both through extensive use of automation and — most importantly — through an awareness that people are the cen- tral element in quality control. From the time the parts arrived from our suppli- ers until you took delivery of your new Nissan, WFW0002 dozens of checks were made to ensure that only the best job was being done in producing and Your new NISSAN is the result of our dedication the facilities include the Nissan Manufacturing delivering your vehicle. NISSAN also takes great to produce the finest in safe, reliable and eco- facility in Smyrna, Tennessee, vehicle styling care to ensure that when you take your NISSAN nomical transportation. Your vehicle is the prod- design at Nissan Design International in San to your dealer for maintenance, the service tech- uct of a successful worldwide company that Diego, California, and engineering at Nissan nician will perform his work according to the manufactures cars and trucks in over 17 coun- Technical Center North America in Farmington quality standards that have been established by tries and distributes them in 170 nations. Hills, Michigan. Additionally, NISSAN employs the factory. nearly 18,000 people throughout the United NISSAN vehicles are designed and manufac- States, Canada, and Mexico. An additional Safety has also been built into your NISSAN. As tured by Nissan Motor Co., Ltd. which was 71,000 people work for the 1,500 NISSAN and you know, seat belts are an integral part of the founded in Tokyo, Japan in 1933, and NISSAN INFINITI dealers across North America. safety systems that will help protect you and your affiliates world wide, collectively growing to be- passengers in the event of a sudden stop or an come the fifth largest automaker in the world. In NISSAN is also a substantial contributor to the accident. We urge you to use the seat belts every addition to cars and trucks, NISSAN also makes Canadian economy. Nissan Canada Inc., its sup- time you drive the vehicle. forklift trucks, marine engines, boats and other pliers and over 140 dealers employ approxi- diversified products. mately 4,500 people. These include company The NISSAN story of growth and achievement employees and the staffs of NISSAN dealers all reflects our major goal: to provide you, our NISSAN has made a substantial and growing across Canada. In addition, many Canadians customer, with a vehicle that is built with quality investment in North America. NISSAN’S commit- work for companies that supply NISSAN and and craftsmanship — a product that we can be ment is nearly $4 billion dollars in capital invest- NISSAN dealers with materials and services proud to build and you can be proud to own. ments in facilities across the continent. Some of ranging from operation of port facilities and trans-

੬ 00.1.17/A33-D/V5.0 ੭ NISSAN CUSTOMER CARE PROGRAM

NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.

However, if there is something that your The Consumer Affairs Department will ask for You can write to NISSAN with the information NISSAN dealer cannot assist you with or you the following information: on the left at: would like to provide NISSAN directly with — Your name, address, and telephone For U.S. mainland and Alaska customers comments or questions, please contact our number Nissan North America, Inc. (NISSAN’s) Consumer Affairs Department us- — Vehicle identification number (on dash- Consumer Affairs Department ing our toll-free number: board) P.O. Box 191 For U.S. mainland customers — Date of purchase Gardena, California 90248-0191 1-800-NISSAN-1 — Current odometer reading For Hawaii customers (1-800-647-7261) — Your NISSAN dealer’s name Nissan Motor Corporation in Hawaii — Your comments or questions 2880 Kilihau St. For Hawaii customers Honolulu, Hawaii 96819 OR (808) 836-0888 (Oahu Number) For Canada customers For Canadian customers Nissan Canada Inc. 1-800-387-0122 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5

We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.

੬ 00.1.17/A33-D/V5.0 ੭ Table of Seats, restraints and supplemental air bag systems Contents Instruments and controls

Pre-driving checks and adjustments

Heater, air conditioner and audio systems

Starting and driving

In case of emergency

Appearance and care

Do-it-yourself

Maintenance

Technical and consumer information

Index

੬ 00.1.17/A33-D/V5.0 ੭ 1 Seats, restraints and supplemental air bag systems

Seats ...... 1-2 Pregnant women ...... 1-24 Front manual seat adjustment ...... 1-2 Injured persons...... 1-24 Front power seat adjustment ...... 1-4 Three-point type seat belt with retractor ...... 1-24 Folding rear seat ...... 1-6 Seat belt extenders ...... 1-27 Head restraint adjustment ...... 1-7 Seat belt maintenance ...... 1-28 Active head restraint (front seats)...... 1-8 Child restraints ...... 1-28 Armrest ...... 1-9 Precautions on child restraints...... 1-28 Supplemental restraint system...... 1-9 Installation on rear seat outboard or center Precautions on supplemental restraint system .... 1-9 positions ...... 1-30 Supplemental air bag warning labels...... 1-19 LATCH (Lower anchors and tether for children) Supplemental air bag warning light...... 1-19 system ...... 1-35 Seat belts ...... 1-21 Top tether strap child restraint ...... 1-36 Precautions on seat belt usage ...... 1-21 Installation on front passenger seat...... 1-37 Child safety...... 1-23

੬ 00.1.17/A33-D/V5.0 ੭ SEATS

FRONT MANUAL SEAT ADJUSTMENT

WARNING

¼ Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause loss of control of the vehicle. ¼ After adjustment, gently rock in the seat to make sure it is securely SSS0133 locked.

WARNING ¼ For most effective protection when the vehicle is in motion, the seat ¼ Do not ride in a moving vehicle when should be upright. Always sit well the seatback is reclined. This can be back in the seat and adjust the seat dangerous. The shoulder belt will not belt properly. See “Precautions on be against your body. In an accident seat belt usage” later in this section. you could be thrown into it and re- ceive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.

1-2 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SPA0097 SPA0099A Forward and backward Reclining Seat lifter (Driver’s seat) Pull the lever up while you slide the seat To recline the seatback, pull the lever up and Turn either dial to adjust the angle and height forward or backward to the desired position. lean back. To bring the seatback forward of the seat cushion to the desired position. Release the lever to lock the seat in position. again, pull the lever and move your body forward. The seatback moves forward.

Seats, restraints and supplemental air bag systems 1-3

੬ 00.1.17/A33-D/V5.0 ੭ FRONT POWER SEAT ADJUSTMENT

WARNING

¼ Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. ¼ Do not leave children unattended in- side the vehicle. They could unknow- ingly activate switches or controls. Unattended children could become SPA0467 involved in serious accidents. Lumbar support (Driver’s seat) The lumbar support feature provides lower Operating tips back support to the driver. Move the lever up ¼ The motor has an auto-reset overload pro- or down to adjust the seat lumbar area. tection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ¼ Do not operate the power support seat for a long period of time when the engine is off. This will discharge the battery.

1-4 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0148 SSS0147 Forward and backward Reclining Seat lifter (Driver’s seat) Moving the switch forward or backward will Move the recline switch backward until the Push the front or rear end of the switch up or slide the seat forward or backward to the desired angle is obtained. To bring the seat- down to adjust the angle and height of the seat desired position. back forward again, move the switch forward cushion. and move your body forward. The seatback will move forward.

Seats, restraints and supplemental air bag systems 1-5

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Rear seats will not fold when the lock levers are in lock position for security of the trunk.

WARNING

¼ When returning the seatbacks to the upright position, be certain that they are completely secured in the latched position. If they are not completely secured in the right position, passen- gers may be injured in an accident or sudden stop. SPA0467 ¼ Never allow anyone to ride in the Lumbar support (Driver’s seat) luggage area or on the rear seat when The lumbar support feature provides lower it is in the fold-down position. Use of back support to the driver. Move the lever up these areas by passengers without or down to adjust the seat lumbar area. proper restraint can be extremely dangerous in an accident or sudden stop. SSS0149 ¼ Properly secure all cargo to help pre- FOLDING REAR SEAT vent it from sliding or shifting. Do not place cargo higher than the seat- Interior trunk access backs. In a sudden stop or collision, The trunk can be readily accessible from the unsecured cargo could cause per- rear seat for loading and unloading, as shown. sonal injury.

1-6 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Closely supervise children when they ment after someone else uses the seat. are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked with the rear seatback securely latched when not in use, and prevent children’s access to car keys.

SSS0125 HEAD RESTRAINT ADJUSTMENT To raise the head restraint, just pull it up. To lower, push the lock knob and push the head restraint down.

WARNING

Head restraints should be adjusted properly as they may provide significant protection against injury in an accident. Do not remove them. Check the adjust-

Seats, restraints and supplemental air bag systems 1-7

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Active head restraints are designed to supplement other safety systems. Always wear seat belts. No system can prevent all injuries in any acci- dent. ¼ Do not attach anything to the head restraint stalks. Doing so could im- pair active head restraint function.

The head restraint moves forward utilizing the force that the seatback receives from the oc- SSS0178 SPA1025 cupant in a rear-end collision. The movement of the head restraint helps support the occu- Adjust the head restraints so the center is level ACTIVE HEAD RESTRAINT (front pant’s head by reducing its backward move- with the center of your ears. seats) ment and helping absorb some of the forces that may lead to whiplash type injuries. WARNING Active head restraints are effective for colli- sions at low to medium speeds in which it is said that whiplash injury occurs most. ¼ Always adjust the head restraints properly as specified in the previous Active head restraints operate only in certain rear-end collisions. After the collision, the head section. Failure to do so can reduce restraints return to their original positions. the effectiveness of the active head restraint. Properly adjust the active head restraints as described in the previous section.

1-8 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SUPPLEMENTAL RESTRAINT SYSTEM PRECAUTIONS ON instructions and precautions on seat belt us- SUPPLEMENTAL RESTRAINT age.) SYSTEM After turning the ignition key to the ON position, the supplemental air bag warning This Supplemental Restraint System (SRS) light illuminates. The supplemental air bag section contains important information con- warning light will turn off after about 7 cerning the driver and passenger supplemen- seconds if the system is operational. tal air bags, supplemental side air bags and pre-tensioner seat belts. Supplemental front air bag system: This system can help cushion the impact force to the face and chest of the driver and front passenger in certain frontal collisions. Supplemental side air bag system (if so equipped): This system can help cushion the impact force to the head and the chest area of the driver and front passenger in certain side impact collisions. The supplemental side air bag is designed to inflate on the side where the vehicle is impacted. These supplemental restraint systems are de- SSS0150 signed to supplement the crash protection provided by the driver and front passenger ARMREST seat belts and are not a substitute for them. Seat belts should always be correctly worn Pull the armrest forward until it is horizontal. and the driver and front passenger seated a suitable distance away from the steering wheel, instrument panel and front door finish- ers. (See “Seat belts” later in this section for

Seats, restraints and supplemental air bag systems 1-9

੬ 00.1.17/A33-D/V5.0 ੭ wheel or instrument panel. Always use the seat belts. ¼ Keep hands on the outside of the steering wheel. Placing them inside the steering wheel rim could increase the risk that they are injured when the supplemental front air bag inflates.

SSS0131

WARNING you are sitting well back and upright in the seat. Front air bags inflate with ¼ The supplemental front air bags ordi- great force. If you are unrestrained, narily will not inflate in the event of a leaning forward, sitting sideways or side impact, rear impact, roll over, or out of position in any way, you are at lower severity frontal collision. Al- greater risk of injury or death in a ways wear your seat belts to help crash and may also receive serious reduce the risk or severity of injury in or fatal injuries from the supplemen- various kinds of accidents. tal front air bag if you are up against it when it inflates. Always sit back ¼ The seat belts and the supplemental against the seatback and as far away front air bags are most effective when as practical from the steering

1-10 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0132 SSS0006

SSS0007

Seats, restraints and supplemental air bag systems 1-11

੬ 00.1.17/A33-D/V5.0 ੭ WARNING

¼ Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some ex- amples of dangerous riding positions are shown in the previous illustra- tions. ¼ Children may be severely injured or killed when the supplemental front air SSS0008 SSS0099 bag or supplemental side air bag in- flates if they are not properly re- strained. ¼ Also never install a rear facing child restraint in the front seat. An inflating supplemental front air bag could se- riously injure or kill your child. For additional information, see “Child re- straints” later in this section.

SSS0009 SSS0100

1-12 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0101 SSS0140 SSS0159

WARNING ¼ The seat belts and the supplemental trations. side air bag are most effective when ¼ When sitting in the rear seat, do not Supplemental side air bag (if so you are sitting well back and upright hold onto the seatback of the front equipped): in the seat. The side air bag inflates seat. If the supplemental side air bag with great force. Do not allow anyone inflates, you may be seriously in- ¼ The supplemental side air bag ordi- to place their hand, leg or face near jured. Be especially careful with chil- narily will not inflate in the event of a the side air bag on the side of the dren, who should always be properly frontal impact, rear impact or lower seatback of the front seat. Do not restrained. severity side collision. Always wear allow anyone sitting in the front seat your seat belts to help reduce the risk ¼ Do not use seat covers on the front to extend their hand out of the win- or severity of injury in various kinds seatbacks. They may interfere with dow or lean against the door. Some of accidents. supplemental side air bag inflation. examples of dangerous riding posi- tions are shown in the previous illus- Seats, restraints and supplemental air bag systems 1-13

੬ 00.1.17/A33-D/V5.0 ੭ SSS0162 SSS0173 Supplemental front air bag system severity frontal collisions, although they may inflate if the forces in another type of collision The driver supplemental air bag is located in are similar to those of a higher severity frontal the center of the steering wheel; the front impact. They may not inflate in certain frontal passenger supplemental air bag is mounted in collisions. Vehicle damage (or lack of it) is not the dashboard above the glove box. These always an indication of proper supplemental systems are designed to meet optional certifi- air bag operation. cation requirements under U.S. regulations. They are also permitted in Canada. The op- When the supplemental front air bag inflates, a tional certification allows front air bags to be fairly loud noise may be heard, followed by designed to inflate somewhat less forcefully release of smoke. This smoke is not harmful than previously. However, all of the informa- and does not indicate a fire, but care should be tion, cautions and warnings in this manual taken not to inhale it, as it may cause irritation still apply and must be followed. The front and choking. Those with a history of a breath- air bags are designed to inflate in higher ing condition should get fresh air promptly. 1-14 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ Supplemental front air bags along with the use of seat belts, helps to cushion the impact force panel. Also, do not place any objects serious personal injury. Tampering on the face and chest of the front occupants. between any occupant and the steer- includes changes to the steering They can help save lives and reduce serious ing wheel or instrument panel. Such wheel and the instrument panel as- injuries. However, an inflating front air bag objects may become dangerous pro- sembly by placing material over the may cause facial abrasions or other injuries. jectiles and cause injury if the supple- steering wheel pad, above the dash- Front air bags do not provide restraint to the mental front air bag inflates. board, or by installing additional trim lower body. material around the air bag system. ¼ Right after inflation, several air bag The seat belts should be correctly worn and system components will be hot. Do ¼ Work around and on the supplemen- the driver and passenger seated upright as far not touch them; you may severely tal front air bag system should be as practical away from the steering wheel or burn yourself. done by an authorized NISSAN dash board. Since the supplemental front air dealer. Installation of electrical equip- bags inflates quickly in order to help protect ¼ No unauthorized changes should be ment should also be done by an au- the front occupants, the force of the front air made to any components or wiring of thorized NISSAN dealer. The SRS wir- bag inflating can increase the risk of injury if the supplemental front air bag sys- ing harnesses* should not be the occupant is too close to or is against the air tem. This is to prevent accidental bag module during inflation. The air bag will modified or disconnected. Unautho- inflation of the air bag or damage to deflate quickly after the collision is over. rized electrical test equipment and the air bag system. After turning the ignition key to the ON probing devices should not be used ¼ position, the supplemental air bag warning Do not make unauthorized changes on the air bag system. to your vehicle’s electrical system, light illuminates. The supplemental air bag * The SRS wiring harnesses are cov- warning light will turn off after about 7 suspension system or front end ered with yellow insulation either just seconds if the system is operational. structure. This could affect proper before the harness connectors or operation of the supplemental air bag over the complete harness for easy system. WARNING identification. ¼ Tampering with the supplemental ¼ Do not place any objects on the steer- front air bag system may result in ing wheel pad or on the instrument When selling your vehicle, we request that you inform the buyer about the supplemental front

Seats, restraints and supplemental air bag systems 1-15

੬ 00.1.17/A33-D/V5.0 ੭ air bag system and guide the buyer to the When the supplemental side air bag inflates, a appropriate sections in this Owner’s Manual. fairly loud noise may be heard, followed by release of smoke. This smoke is not harmful and does not indicate a fire, but care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breath- ing condition should get fresh air promptly. Supplemental side air bags along with the use of seat belts, help to cushion the impact force on the head and the chest of the front occu- pants. They can help save lives and reduce serious injuries. However, an inflating side air bag may cause abrasions or other injuries. SSS0165 Side air bags do not provide restraint to the lower body. Supplemental side air bag system (if so equipped) The seat belts should be correctly worn and the driver and passenger seated upright as far The supplemental side air bags are located in as practical away from the supplemental side the outside of the seatback of the front seats. air bag. Since the side air bag inflates quickly The supplemental side air bag (on the driver or in order to help protect the front occupants, the front passenger seat) is designed to inflate in force of the side air bag inflating can increase higher severity side collisions, although it may the risk of injury if the occupant is too close to inflate if the forces in another type of collision or is against the side air bag module during are similar to those of a higher severity side inflation. The side air bag will deflate quickly impact. It is designed to inflate on the side after the collision is over. where the vehicle is impacted. It may not After turning the ignition key to the ON inflate in certain side collisions. Vehicle dam- position, the supplemental air bag warning age (or lack of it) is not always an indication of light illuminates. The supplemental air bag proper supplemental side air bag operation. warning light will turn off after about 7 1-16 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ seconds if the system is operational. This could affect proper operation of before the harness connectors or WARNING the supplemental side air bag sys- over the complete harness for easy tem. identification.

¼ Do not place any objects near the ¼ Tampering with the supplemental seatback of the front seats. Also, do side air bag system may result in When selling your vehicle, we request that you not place any objects (an umbrella, serious personal injury. Tampering inform the buyer about the supplemental side bag, etc.) between the front door fin- includes changes to the front seats air bag system and guide the buyer to the isher and the front seat. Such objects assembly by placing material near appropriate sections in this Owner’s Manual. may become dangerous projectiles the seatback of the front seat, or by Pre-tensioner seat belt system (For installing additional trim material, and cause injury if the supplemental front seats) side air bag inflates. such as seat covers, around the side air bag system. ¼ Right after inflation, several supple- WARNING mental side air bag system compo- ¼ Work around and on the supplemen- nents will be hot. Do not touch them; tal side air bag system should be ¼ The pre-tensioner seat belt cannot be you may severely burn yourself. done by an authorized NISSAN dealer. Installation of electrical equip- reused after activation. It must be ¼ No unauthorized changes should be ment should also be done by an au- replaced together with the retractor made to any components or wiring of thorized NISSAN dealer. The SRS wir- as a unit. the supplemental side air bag sys- ing harnesses* should not be ¼ If the vehicle becomes involved in a tem. This is to prevent accidental modified or disconnected. Unautho- frontal collision but the pre-tensioner inflation of the side air bag or damage rized electrical test equipment and is not activated, be sure to have the to the side air bag system. probing devices should not be used pre-tensioner system checked and, if ¼ Do not make unauthorized changes on the side air bag system. necessary, replaced by your NISSAN to your vehicle’s electrical system, * The SRS wiring harnesses are cov- dealer. suspension system or side panel. ered with yellow insulation either just ¼ No unauthorized changes should be

Seats, restraints and supplemental air bag systems 1-17

੬ 00.1.17/A33-D/V5.0 ੭ The front seat pre-tensioner seat belt system made to any components or wiring of activates in conjunction with the supplemental the pre-tensioner seat belt system. front air bag. Working with the seat belt retrac- This is to prevent accidental activa- tor, it helps tighten the seat belt the instant the tion of the pre-tensioner seat belt or vehicle becomes involved in certain types of damage to the pre-tensioner seat belt collisions, thereby restraining seat occupants. operation. Tampering with the pre- The pre-tensioner is encased with the seat tensioner seat belt system may result belt’s retractor. These seat belts are used the in serious personal injury. same as conventional seat belts. ¼ Work around and on the pre- When the pre-tensioner seat belt activates, tensioner system should be done by smoke is released and a loud noise may be an authorized NISSAN dealer. Instal- heard. The smoke is not harmful, but care should be taken not to inhale it as it may cause lation of electrical equipment should irritation and choking. Those with a history of a also be done by an authorized breathing condition should get fresh air NISSAN dealer. Unauthorized electri- promptly. cal test equipment and probing de- vices should not be used on the pre- If any abnormality occurs in the pre-tensioner system, the supplemental air bag warning light tensioner seat belt system. will not come on, will flash intermittently ¼ If you need to dispose of the pre- or will turn on for 7 seconds and remain on tensioner or scrap the vehicle, con- after the ignition key has been turned to the tact an authorized NISSAN dealer. ON or START position. In this case, the pre- tensioner seat belt may not function properly. Correct pre-tensioner disposal proce- dures are set forth in the appropriate When selling your vehicle, we request that you NISSAN Service Manual. Incorrect inform the buyer about the pre-tensioner seat disposal procedures could cause belt system and guide the buyer to the appro- personal injury. priate sections in this Owner’s Manual.

1-18 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SPA0945B SPA1097 SUPPLEMENTAL AIR BAG SUPPLEMENTAL AIR BAG WARNING LABELS WARNING LIGHT Warning labels about the supplemental air bag The supplemental air bag warning light, dis- system are placed in the vehicle as shown in playing in the instrument panel, monitors the illustration. the circuits of the supplemental front air bag and supplemental side air bag systems, and pre-tensioner seat belt. The circuits monitored by the air bag warning light are the diagnosis sensor unit, satellite sensors, front air bag modules, side air bag modules and all related wiring, and pre-tensioner seat belt. After turning the ignition key to the ON posi- tion, the supplemental air bag warning light illuminates. The supplemental air bag warning

Seats, restraints and supplemental air bag systems 1-19

੬ 00.1.17/A33-D/V5.0 ੭ light will turn off after about 7 seconds if the Repair and replacement procedure system is operational. tensioner seat belt has in flated, the If any of the following conditions occur, the The supplemental front air bags, supplemental air bag module will not function again supplemental front air bag system, supple- side air bags and pre-tensioner seat belt are and must be replaced. The module mental side air bag system, and pre-tensioner designed to inflate on a one-time-only basis. should be replaced by an authorized seat belt need servicing: As a reminder, unless it is damaged, the NISSAN dealer. The supplemental supplemental air bag warning light will remain ¼ The supplemental air bag warning light front air bag module or supplemental illuminated after inflation has occurred. Repair remains on after approximately 7 seconds. side air bag module cannot be re- and replacement of these systems should be ¼ The supplemental air bag warning light done only by authorized NISSAN dealers. paired. flashes intermittently. ¼ ¼ The supplemental air bag warning light To ensure long-term functioning, these The supplemental front air bag sys- does not come on at all. systems must be inspected 10 years after tem, supplemental side air bag sys- Under these conditions, the supplemental front the date of manufacture noted on the cer- tem and pre-tensioner seat belt air bags, supplemental side air bags and/or tification label located on the driver side should be inspected by an authorized pre-tensioner seat belt may not operate prop- center pillar. NISSAN dealer if there is any damage erly. They must be checked and repaired. to the front end or side portion of the When maintenance work is required on the Take your vehicle to the nearest authorized vehicle. NISSAN dealer. vehicle, the supplemental front air bags, supplemental side air bags, related parts and ¼ If you need to dispose of these pre-tensioner seat belt should be pointed out WARNING supplemental systems or scrap the to the person conducting the maintenance. vehicle, contact an authorized The ignition key should always be in the LOCK NISSAN dealer. If the supplemental air bag warning light position when working under the hood or in- is on, it could mean that the supplemen- side the vehicle. Correct disposal procedures are set tal front air bag system, supplemental forth in the appropriate NISSAN Ser- side air bag system and/or pre-tensioner WARNING vice Manual. Incorrect disposal pro- seat belt will not operate in an accident. cedures could cause personal injury. ¼ Once the supplemental front air bag, supplemental side air bag and/or pre-

1-20 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SEAT BELTS

PRECAUTIONS ON SEAT BELT USAGE Your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced if you are wearing your seat belt and it is properly adjusted. NISSAN strongly encourages you and all of your pas- sengers to buckle up every time you drive, even if your seating position includes a supple- mental air bag. Most states, provinces or territories require that seat belts be worn at all times when a vehicle is being driven. SSS0134

WARNING chance or severity of injury in an accident. Serious injury or death can ¼ Every person who drives or rides in occur if the seat belt is not worn this vehicle should use a seat belt at properly. all times. Children should be properly ¼ Always route the shoulder belt over restrained and, if appropriate, in a your shoulder and across your chest. child restraint. Never run the belt behind your back ¼ The belt should be properly adjusted under your arm or across your neck. to a snug fit. Failure to do so may The belt should be away from your reduce the effectiveness of the entire face and neck, but not falling off your restraint system and increase the shoulder.

Seats, restraints and supplemental air bag systems 1-21

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Position the lap belt as low and snug as possible around the hips, not the waist. A lap belt worn too high could increase the risk of internal injuries in an accident. ¼ Be sure the seat belt tongue is se- curely fastened to the proper buckle. ¼ Do not wear the belt inside out or twisted. Doing so may reduce its ef- fectiveness. ¼ Do not allow more than one person to SSS0136 use the same belt. ¼ Never carry more people in the ve- must be replaced together with the replaced unless the collision was mi- hicle than there are seat belts. retractor. See your NISSAN dealer. nor and the belts show no damage and continue to operate properly. ¼ If the seat belt warning light glows ¼ Removal and installation of the pre- Seat belt assemblies not in use dur- continuously while the ignition is tensioner seat belt system compo- ing a collision should also be in- nents should be done by an autho- turned ON with all doors closed and spected and replaced if either dam- rized NISSAN dealer. all seat belts fastened, it may indicate age or improper operation is noted. a malfunction in the system. Have the ¼ All seat belt assemblies including re- system checked by your NISSAN tractors and attaching hardware dealer. should be inspected after any colli- sion by your NISSAN dealer. NISSAN ¼ Once the pre-tensioner seat belt has recommends that all seat belt assem- activated, it cannot be reused and blies in use during a collision be

1-22 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ All US states and provinces of Canada require the use of approved child restraints for infants and small children. (See “Child restraints” later in this section.) In addition, there are many types of child restraints available for larger children which should be used for maximum protection. NISSAN recommends that all preteens and children be restrained in the rear seat if possible. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. This is especially important because your SSS0016 SSS0014 vehicle has a supplemental restraint sys- CHILD SAFETY tem (air bag system) for the front passen- WARNING ger (see “Supplemental Restraint System” Children need adults to help protect them. earlier in this section for precautions). They need to be properly restrained. Infants and children need special pro- Infants and small children The proper restraint depends on the child’s tection. The vehicle’s seat belts may not size. Generally, infants (up to about 1 year and NISSAN recommends that infants and small fit them properly. The shoulder belt may less than 20 lb (9 kg) should be placed in rear children be placed in child restraints that com- facing child restraints. Front facing child re- come too close to the face or neck. The ply with Federal Motor Vehicle Safety Stan- straints are available for children who outgrow lap belt may not fit over their small hip dards or Canadian Motor Vehicle Safety Stan- rear facing child restraints. bones. In an accident, an improperly dards. You should choose a child restraint that fitting seat belt could cause serious or fits your vehicle and always follow the manu- fatal injury. Always use appropriate child facturer’s instructions for installation and use. restraints.

Seats, restraints and supplemental air bag systems 1-23

੬ 00.1.17/A33-D/V5.0 ੭ Larger children PREGNANT WOMEN Children who are too large for child restraint NISSAN recommends that pregnant women systems should be seated and restrained by use seat belts. The seat belt should be worn the seat belts which are provided. snug, and always position the lap belt as low as possible around the hips, not the waist. If the child’s seating position has a shoulder Place the shoulder belt over your shoulder and belt that fits close to the face or neck, the use across your chest. Never run the lap/shoulder of a booster seat (commercially available) may belt over your abdominal area. Contact your help overcome this. The booster seat should doctor for specific recommendations. raise the child so that the shoulder belt is properly positioned across the top, middle INJURED PERSONS portion of the shoulder and the lap belt is low NISSAN recommends that injured persons on the hips. The booster seat should fit the use seat belts, depending on the injury. Check vehicle seat and have a label certifying that it with your doctor for specific recommendations. SSS0018 complies with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety THREE-POINT TYPE SEAT BELT Standards. Once the child has grown so the WITH RETRACTOR shoulder belt is no longer on or near the face and neck, use the shoulder belt without the booster seat. WARNING ¼ Every person who drives or rides in WARNING this vehicle should use a seat belt at all times. Never let a child stand or kneel on any ¼ Do not ride in a moving vehicle when seat and do not allow a child in the cargo the seatback is reclined. This can be areas while the vehicle is moving. The dangerous. The shoulder belt will not child could be seriously injured or killed be against your body. In an accident in an accident or a sudden stop.

1-24 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0020 SSS0102 SSS0061 Fastening the seat belts 3. Position the lap belt portion low and snug you could be thrown into it and re- on the hips as shown. ceive neck or other serious injuries. 1. Adjust the seat. You could also slide under the lap 4. Pull the shoulder belt portion toward the belt and receive serious internal inju- 2. Slowly pull the seat belt out of the retractor retractor to take up extra slack. ries. and insert the tongue into the buckle until it snaps. The front passenger and rear seat belts have a ¼ For most effective protection when cinching mechanism for child restraint installa- the vehicle is in motion, the seat The retractor is designed to lock during a sudden stop or on impact. A slow pulling tion. It is referred to as the automatic locking should be upright. Always sit well mode. back in the seat and adjust the seat motion will permit the belt to move, and belt properly. allow you some freedom of movement in When the cinching mechanism is activated the the seat. seat belt cannot be withdrawn again until the seat belt tongue is detached from the buckle and fully retracted. For additional information, see “Child restraints” later in this section.

Seats, restraints and supplemental air bag systems 1-25

੬ 00.1.17/A33-D/V5.0 ੭ The automatic locking mode should be forward. The retractor should lock and re- used only for child restraint installation. strict further belt movement. During normal seat belt use by a passen- If the retractor does not lock during this check ger, the locking mode should not be acti- or if you have any questions about belt opera- vated. If it is activated it may cause uncom- tion, see your NISSAN dealer. fortable seat belt tension.

WARNING

When fastening the seat belts, be certain that seatbacks are completely secured in the latched position. If they are not completely secured in the right position, passengers may be injured in an acci- SSS0021 dent or sudden stop. Unfastening the seat belts To unfasten the belt, press the button on the buckle. The seat belt will automatically retract. Checking seat belt operation Your seat belt retractors are designed to lock belt movement using two separate methods: ¼ when the belt is pulled quickly from the retractor. ¼ when the vehicle slows down rapidly. You can check their operation as follows: ¼ grasp the shoulder belt and pull quickly 1-26 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ WARNING

¼ After adjustment, release the adjust- ment button and try to move the shoulder belt down to make sure it is securely fixed in position. ¼ The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the entire restraint system and increase the SPA0829 SSS0152 chance or severity of injury in an accident. Center of rear seat (if so equipped) Shoulder belt height adjustment (For front seats) Selecting correct set of seat belts: SEAT BELT EXTENDERS The shoulder belt anchor height should be The center seat belt buckle is identified by the If, because of body size or driving position, it is CENTER mark. The center seat belt tongue adjusted to the position best suited for you. (See “Precautions on seat belt usage” earlier not possible to properly fit the lap-shoulder belt can be fastened only into the center seat belt and fasten it, an extender is available which is buckle. in this section.) To lower, push the release button, and then move the shoulder belt an- compatible with the installed seat belts. The chor to the desired position, so that the belt extender adds approximately 8 inches (200 passes over the shoulder. Release the adjust- mm) of length and may be used for either the ment button to lock the shoulder belt anchor driver or front passenger seating position. See into position. your NISSAN dealer for assistance if the ex- tender is required. To raise, move the adjuster up to the desired position without pushing the button.

Seats, restraints and supplemental air bag systems 1-27

੬ 00.1.17/A33-D/V5.0 ੭ CHILD RESTRAINTS

buckles, tongues, retractors, flexible wires PRECAUTIONS ON CHILD WARNING and anchors work properly. If loose parts, RESTRAINTS deterioration, cuts or other damage on the ¼ webbing is found, the entire belt assembly Only NISSAN belt extenders, made by should be replaced. WARNING the same company which made the original equipment belts, should be ¼ Infants and small children should al- used with NISSAN belts. ways be placed in an appropriate ¼ Persons who can use the standard child restraint while riding in the ve- seat belt should not use an extender. hicle. Failure to use a child restraint Such unnecessary use could result in can result in serious injury or death. serious personal injury in the event of ¼ Infants and small children should an accident. never be carried on your lap. It is not possible for even the strongest adult SEAT BELT MAINTENANCE to resist the forces of a severe acci- dent. The child could be crushed be- ¼ To clean the seat belt webbings, apply a mild soap solution or any solution recom- tween the adult and parts of the ve- mended for cleaning upholstery or carpets. hicle. Also, do not put the same seat Then brush the webbing, wipe it with a cloth belt around both your child and your- and allow it to dry in the shade. Do not allow self. the seat belts to retract until they are com- ¼ Never install a rear facing child re- pletely dry. straint in the front seat. An inflating ¼ If dirt builds up in the shoulder belt guide of supplemental air bag could seriously the seat belt anchors, the seat belts may injure or kill your child. A rear facing retract slowly. Wipe the shoulder belt guide child restraint must only be used in with a clean, dry cloth. the rear seat. ¼ Periodically check to see that the seat belt and the metal components such as 1-28 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ Vehicle Safety Standard 213 or Canadian ¼ NISSAN recommends that the child Motor Vehicle Safety Standard 213. ¼ Follow all of the child restraint manu- restraint be installed in the rear seat. facturer’s instructions for installation ¼ check the child restraint in your vehicle to According to accident statistics, chil- and use. When purchasing a child be sure it is compatible with the vehicle’s dren are safer when properly re- restraint, be sure to select one which seat and seat belt system. Choose a child strained in the rear seat than in the will fit your child and vehicle. It may restraint that meets the guidelines of the front seat. Society of Automotive Engineers recom- not be possible to properly install some types of child restraints in your ¼ An improperly installed child re- mended practice J1819 for child restraint vehicle. straint could lead to serious injury or installation. ¼ If the child restraint is not anchored death in an accident. ¼ if the child restraint is compatible with your properly, the risk of a child being vehicle, place your child in the child re- injured in a collision or a sudden stop straint and check the various adjustments In general, child restraints are designed to be greatly increases. installed with the lap portion of a three-point to be sure the child restraint is compatible ¼ Adjustable seatbacks should be posi- type seat belt. In addition, this vehicle is with your child. Always follow all recom- mended procedures. tioned to fit the child restraint, but as equipped with a universal child restraint lower upright as possible. anchor system, referred to as the LATCH All US states and Canadian provinces re- (Lower Anchors and Tether for Children) sys- quire that infants and small children be ¼ After attaching the child restraint, tem. Some child restraints include two rigid or restrained in approved child restraints at test it before you place the child in it. webbing-mounted attachments that can be all times while the vehicle is being oper- Tilt it from side to side. Try to tug it connected to these lower anchors. For details, ated. forward and check to see if the belt see “LATCH (Lower Anchors and Tether for holds the restraint in place. If the Children) SYSTEM” later in this section. WARNING restraint is not secure, tighten the Child restraints for infants and children of belt as necessary, or put the restraint various sizes are offered by several manufac- ¼ Improper use of a child restraint can in another seat and test it again. turers. When selecting any child restraint, result in increased injuries for both ¼ For a front facing child restraint, keep the following points in mind: the infant or child and other occu- check to make sure the shoulder belt ¼ choose only a restraint with a label certify- pants in the vehicle. ing that it complies with Federal Motor Seats, restraints and supplemental air bag systems 1-29

੬ 00.1.17/A33-D/V5.0 ੭ INSTALLATION ON REAR SEAT does not go in front of the child’s face OUTBOARD OR CENTER or neck. If it does, put the shoulder POSITIONS belt behind the child restraint. If you must install a front facing child re- straint in the front seat, see instruc- WARNING tions later in this section. ¼ The three-point belt on your vehicle is ¼ When your child restraint is not in equipped with a locking mode retrac- use, store it in the trunk or keep it tor which must be used when install- secured with a seat belt to prevent it ing a child restraint. from being thrown around in case of a sudden stop or accident. ¼ Failure to do so will result in the child restraint not being properly secured. It could tip over or otherwise be un- SSS0153 CAUTION secured and cause injury to the child Front facing in a sudden stop or collision. When you install a child restraint in a rear Remember that a child restraint left in a outboard or center seat, follow these steps: closed vehicle can become very hot. 1. Position the child restraint on the seat. It Check the seating surface and buckles can be placed in a front facing direction, before placing your child in the child depending on the size of the child. Always restraint. follow the restraint manufacturer’s instruc- tions.

1-30 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0154 SSS0043 SSS0107 2. Route the seat belt tongue through the child 3. Pull on the shoulder belt until all of the belt restraint and insert it into the buckle until is fully extended. At this time, the belt you hear and feel the latch engage. retractor is in the automatic locking mode Be sure to follow the child restraint manu- (child restraint mode). It reverts back to facturer’s instructions for belt routing. emergency locking mode when the belt is fully retracted.

Seats, restraints and supplemental air bag systems 1-31

੬ 00.1.17/A33-D/V5.0 ੭ retractor, the automatic locking mode (child restraint mode) is canceled; the seat belt only locks during a sudden stop or impact.

SSS0062 SSS0108 4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re- to remove any slack in the belt. straint, use force to tilt the child restraint from side to side, and tug it forward to make sure that it is securely held in place. 6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt is allowed to wind back into the 1-32 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0155 SSS0156 SSS0046 Rear facing 2. Route the seat belt tongue through the child restraint and insert it into the buckle until When you install a child restraint in a rear you hear and feel the latch engage. outboard or center seat, follow these steps: Be sure to follow the child restraint manu- 1. Position the child restraint on the seat. The facturer’s instructions for belt routing. direction of the child restraint depends on the type of the child restraint and the size of the child. Always follow the restraint manu- facturer’s instructions.

Seats, restraints and supplemental air bag systems 1-33

੬ 00.1.17/A33-D/V5.0 ੭ SSS0045A SSS0109 SSS0110 3. Pull on the shoulder belt until all of the belt 4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re- is fully extended. At this time, the belt to remove any slack in the belt. straint, use force to tilt the child restraint retractor is in the automatic locking mode from side to side, and tug it forward to make (child restraint mode). It reverts back to sure that it is securely held in place. emergency locking mode when the belt is fully retracted. 6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt is allowed to wind back into the 1-34 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ retractor, the automatic locking mode (child restraint mode) is canceled; the seat belt only ¼ Do not secure a child restraint in the locks during a sudden stop or impact. center rear seating position using the child restraint lower anchors. The child restraint will not be secured properly. ¼ The LATCH system anchors are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstance are they to be used for adult seat belts or harnesses.

SSS0177A Some child restraints include two rigid or LATCH (LOWER ANCHORS AND webbing-mounted attachments that can be TETHER FOR CHILDREN) connected to two anchors located at certain SYSTEM seating positions in your vehicle. This system is known as the LATCH (Lower Anchors and Tether for Children) system. This system may WARNING also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do ¼ Attach LATCH system compatible not have to use a vehicle seat belt to secure child restraints only at the locations the child restraint. Your vehicle is equipped shown. If a child restraint is not se- with special anchor points that are used with cured properly, your child could be LATCH system compatible child restraints. seriously injured or killed in an Check your child restraint for a label stating that it is compatible with the LATCH system. accident. This information may also be in the child restraint owner’s manual. If you have such a Seats, restraints and supplemental air bag systems 1-35

੬ 00.1.17/A33-D/V5.0 ੭ child restraint, refer to the illustration for the rear seating positions equipped with LATCH restraint will not be secured properly if system anchors which can be used to secure the LATCH system anchors are ob- the child restraint. structed. The LATCH system anchors are located at the 1. To install the LATCH system compat- rear of the seat cushion near the seatback. A ible child restraint, insert the child label is attached to the seatback to help you restraint LATCH system anchor at- locate the LATCH system anchors. tachments into the anchor points on Some child restraints may also require the use the rear seat. If the child restraint is of a top tether strap. See “Top tether strap equipped with a top tether, see “Top child restraint” later in this section for installa- tether strap child restraint” later in tion instructions. this section for installation instruc- When installing a child restraint, carefully read tions. and follow the instructions in this manual and SSS0157 those supplied with the child restraint. 2. After attaching the child restraint and before placing the child in it, use TOP TETHER STRAP CHILD When you install a LATCH system compatible force to tilt the child restraint from RESTRAINT child restraint to the lower anchor attachments side to side and tug it forward to in the rear seat, follow these steps. If your child restraint has a top tether strap, it make sure that the child restraint is must be secured to the provided anchor point. securely held in place. First, secure the child restraint with the rear WARNING 3. Check to make sure that the child seat belt. restraint is properly secured prior to Remove the anchor cover from the anchor Inspect the lower anchors by inserting each use. point which is located directly behind the child your fingers into the lower anchor area seat. and feeling to make sure there are no obstructions over the LATCH system Secure the top tether strap to the anchor bracket. anchors, such as seat belt webbing or seat cushion material. The child Keep the removed cover in a secured place to prevent loss or damage to the cover. 1-36 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ WARNING

The child restraint anchor point is de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstance is it to be used for adult seat belts or har- nesses.

Anchor point locations Anchor points are located on the rear parcel shelf finisher. SSS0129 If you have any questions when installing a INSTALLATION ON FRONT ¼ NISSAN recommends that child re- top strap child restraint on the rear seat, PASSENGER SEAT straints be installed in the rear seat. consult your NISSAN dealer for details. However, if you must install a front WARNING facing child restraint in the front pas- senger seat, move the passenger seat to the rearmost position. ¼ Never install a rear facing child re- straint in the front passenger seat. ¼ A child restraint with a top tether Supplemental air bags inflate with strap should not be used in the front great force. A rear facing child re- passenger seat. straint could be struck by the supple- ¼ The three-point belt in your vehicle is mental air bag in a crash and could equipped with a locking mode retrac- seriously injure or kill your child. tor which must be used when install-

Seats, restraints and supplemental air bag systems 1-37

੬ 00.1.17/A33-D/V5.0 ੭ ing a child restraint. ¼ Failure to use the retractor’s locking mode will result in the child restraint not being properly secured. The child restraint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.

SSS0135 SSS0055 Front facing 2. Route the seat belt tongue through the child restraint and insert it into the buckle until If you must install a child restraint in the front you hear and feel the latch engage. Be sure seat, follow these steps: to follow the child restraint manufacturer’s 1. Position the child restraint on the front instructions for belt routing. passenger seat. It should be placed in a front facing direction only. Move the seat to the rearmost position. Always follow the child restraint manufacturer’s instructions. Child restraints for infants must be used in the rear facing direction and therefore must not be used in the front seat.

1-38 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ SSS0113 SSS0056 SSS0114 3. Pull on the shoulder belt until all of the belt 4. Allow the belt to retract. Pull up on the belt 5. Before placing the child in the child re- is fully extended. At this time, the belt to remove any slack in the belt. straint, use force to tilt the child restraint retractor is in the automatic locking mode from side to side, and tug it forward to make (child restraint mode). It reverts back to sure that it is securely held in place. emergency locking mode when the belt is fully retracted. 6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured prior to each use. If the lap belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the Seats, restraints and supplemental air bag systems 1-39

੬ 00.1.17/A33-D/V5.0 ੭ seat belt is allowed to wind back into the retractor, the automatic locking mode (child restraint mode) is canceled; the seat belt only locks during a sudden stop or impact.

1-40 Seats, restraints and supplemental air bag systems

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

Seats, restraints and supplemental air bag systems 1-41

੬ 00.1.17/A33-D/V5.0 ੭ 2 Instruments and controls

Instrument panel ...... 2-2 Heated seats (if so equipped)...... 2-20 Meters and gauges ...... 2-3 Traction control system (TCS) cancel switch Speedometer and odometer ...... 2-4 (if so equipped) ...... 2-21 Tachometer ...... 2-4 Power outlet ...... 2-21 Engine coolant temperature gauge...... 2-5 Cigarette lighter and ashtray (accessory)...... 2-22 Fuel gauge ...... 2-5 Storage...... 2-22 Warning/indicator lights and audible reminders...... 2-7 Trays...... 2-22 Checking bulbs...... 2-7 Glasses case...... 2-23 Warning lights...... 2-7 Cup holder...... 2-23 Indicator lights ...... 2-9 Glove box ...... 2-24 Audible reminders ...... 2-11 Console box ...... 2-25 Brake pad wear warning ...... 2-12 Cargo net (if so equipped) ...... 2-25 Security systems ...... 2-12 Windows...... 2-26 Vehivle security system...... 2-12 Power windows ...... 2-26 Nissan Vehicle Immobilizer System ...... 2-13 Sunroof (if so equipped) ...... 2-28 Windshield wiper and washer switch...... 2-14 Automatic sunroof ...... 2-28 Rear window and outside mirror (if so equipped) Clock ...... 2-29 defogger switch ...... 2-15 Adjusting the time...... 2-29 Headlight and turn signal switch...... 2-16 Headlight switch ...... 2-16 Interior light ...... 2-29 Turn signal switch ...... 2-18 Ceiling...... 2-29 Fog light switch (if so equipped)...... 2-18 Personal light ...... 2-30 Hazard warning flasher switch...... 2-19 Vanity mirror light (if so equipped)...... 2-31 Horn...... 2-19 Trunk light ...... 2-32

੬ 00.1.17/A33-D/V5.0 ੭ Integrated HomeLink Universal Transceiver Programming problem-Diagnosis...... 2-34 (if so equipped) ...... 2-32 Clearing the programmed information...... 2-34 Programming HomeLink ...... 2-33 Rolling code programming ...... 2-34 Programming HomeLink for Canadian Reprogramming a single HomeLink button...... 2-35 customers ...... 2-33 If your vehicle is stolen ...... 2-35 Operating the integrated HomeLink Universal Transceiver...... 2-34

੬ 00.1.17/A33-D/V5.0 ੭ INSTRUMENT PANEL

Windshield wiper/washer switch (P.2-14) Traction control system (TCS) cancel switch (if so equipped) (P.2-21) Ventilator (P.4-2) Rear window and outside mirror (if so equipped) defogger switch (P.2-15) Heater/air conditioner control (P.4-3) Meters/gauges (P.2-3) Instrument brightness control switch (P.2-17) Clock (P.2-29) Security indicator light (P.2-12) Headlight, fog light (if so equipped) Radio/cassette player (P.4-14)/CD player (P.4-19) and turn signal switch (P.2-16) Passenger supplemental air bag (P.1-9)

Glove box (P.2-24) Fuse box cover (P.8-21) Outside mirror remote control (P.3-15) Steering switch for audio control (if so equipped) (P.4-24) Driver supplemental air bag (P.1-9) Tilting steering wheel lock lever (P.3-13) Cruise control main/set switch (P.5-14) Tray (P.2-22) or ashtray (accessory) (P.2-22) Ignition switch/steering lock (P.5-4) Hazard warning flasher switch (P.2-19) Power outlet (P.2-21) or cigarette lighter (accessory) (P.2-22) See the page indicated in parentheses for operating details. SIC1566 2-2 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ METERS AND GAUGES

SIC1321 Instruments and controls 2-3

੬ 00.1.17/A33-D/V5.0 ੭ Changing the display: Pushing the reset knob changes the display as follows: TRIP A , TRIP B , TRIP A Resetting the trip odometer: Pushing the reset knob for more than 1 second resets the trip odometer to zero.

SIC1227 SIC1249 SPEEDOMETER AND ODOMETER TACHOMETER Speedometer The tachometer indicates engine speed in revolutions per minute (r/min). The speedometer indicates vehicle speed. Odometer/Twin trip odometer CAUTION The odometer/twin trip odometer are displayed when the ignition key is in the ON position. When engine speed approaches the red zone, shift to a higher gear. Operating The odometer records the total distance the the engine in the red zone may cause vehicle has been driven. serious engine damage. The twin trip odometer records the distance of individual trips.

2-4 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ CAUTION

If the gauge indicates engine coolant temperature over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued op- eration of the vehicle may seriously damage the engine. See “If your vehicle overheats” in the “6. In case of emer- gency” section for immediate action re- quired.

SIC0173 SIC1565 ENGINE COOLANT FUEL GAUGE TEMPERATURE GAUGE The gauge indicates the approximate fuel level The gauge indicates the engine coolant tem- in the tank. perature. The gauge may move slightly during braking, The engine coolant temperature will vary with turning, acceleration, or going up or down hill. the outside air temperature and driving condi- The gauge needle is designed to move to the tions. E (Empty) position when the ignition key is turned to the OFF position. Refill the fuel tank before the gauge regis- ters Empty.

Instruments and controls 2-5

੬ 00.1.17/A33-D/V5.0 ੭ The low fuel warning light comes on when the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the gauge reaches E. There will be a small reserve of fuel in the tank when the fuel gauge needle reaches E. The indicates that the fuel filler lid is located on the driver’s side of the vehicle.

CAUTION

¼ If the vehicle runs out of fuel, the malfunction indicator lamp (MIL) may come on. Refuel as soon as possible. After a few driving trips, the lamp should turn off. If the lamp remains on after a few driving trips, have the vehicle inspected by an au- thorized NISSAN dealer. ¼ For additional information, see the “Malfunction indicator lamp (MIL)” later in this section.

2-6 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS

Low washer fluid warning light (if so Engine oil pressure warning light High beam indicator light (Blue) equipped)

Charge warning light or Brake warning light Cruise main switch indicator light

Anti-lock brake warning light Door open warning light or Cruise set indicator light (if so equipped)

Seat belt warning light Low fuel warning light Malfunction indicator lamp (MIL)

Traction control system indicator light (if Supplemental air bag warning light Overdrive off indicator light so equipped)

Trunk lid open warning light Turn signal/hazard indicator light Slip indicator light (if so equipped)

CHECKING BULBS WARNING LIGHTS Apply the parking brake and turn the ignition CAUTION key to ON without starting the engine. The Engine oil pressure warning following lights will come on: light Running the engine with the oil pressure , or , , , , This light warns of low engine oil pressure. If warning light on could cause serious the light flickers or comes on during normal damage to the engine almost immedi- driving, pull off the road in a safe area, stop the ately. Turn off the engine as soon as it is The following lights come on briefly and then engine immediately and call a NISSAN dealer safe to do so. go off: or other authorized repair shop. , or , The oil pressure warning light is not de- If any light fails to come on, it may indicate a signed to indicate a low oil level. Use the Charge warning light burned-out bulb or an open circuit in the elec- dipstick to check the oil level. See “Engine If the light comes on while the engine is trical system. Have the system repaired oil” in the “8. Do-it-yourself” section. running, it may indicate that the charging sys- promptly. tem is not functioning properly. Turn the en- Instruments and controls 2-7

੬ 00.1.17/A33-D/V5.0 ੭ gine off and check the alternator belt. If the belt Supplemental air bag warning is loose, broken, missing or if the light remains light WARNING on, see your NISSAN dealer immediately. After turning the ignition key to the ON posi- tion, the supplemental air bag warning light will If the supplemental air bag warning light CAUTION illuminate. The supplemental air bag warning is on, it could mean that the supplemen- light will turn off after about 7 seconds if the tal air bag system, supplemental side air Do not continue driving if the belt is system is operational. bag system (if so equipped) and/or pre- tensioner seat belt will not operate in an loose, broken or missing. If any of the following conditions occur, the supplemental front air bag, supplemental side accident. Door open warning light air bag and pre-tensioner seat belt needs servicing and your vehicle must be taken to Trunk lid open warning light This light comes on when any of the doors are your nearest authorized NISSAN dealer. not closed securely while the ignition key is ¼ The supplemental air bag warning light This light comes on when the trunk lid is not ON. remains on after approximately 7 seconds. closed securely while the ignition key is ON. Seat belt warning light and ¼ The supplemental air bag warning light Low washer fluid warning chime flashes intermittently. light (if so equipped) ¼ The light and chime remind you to fasten seat The supplemental air bag warning light This light comes on when the washer tank fluid belts. The light illuminates whenever the igni- does not come on at all. is at a low level. Add washer fluid as neces- tion key is turned to ON, and will remain Unless checked and repaired, the Supplemen- sary. See “Window washer fluid” in the “8. illuminated until the driver’s seat belt is fas- tal Restraint System and/or the pre-tensioner Do-it-yourself” section. tened. At the same time, the chime will sound seat belt may not function properly. For addi- for about 6 seconds unless the driver’s seat tional information, see “Supplemental restraint or Brake warning light belt is securely fastened. system” in the “1. Seats, restraints and supple- This light functions for both the parking brake mental air bag systems” section. See “Seat belts” in the “1. Seats, restraints and and the foot brake systems. supplemental air bag systems” section for pre- Parking brake indicator: cautions on seat belt usage. When the ignition key is in the ON position, the

2-8 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ light comes on when the parking brake is If the light comes on while you are driving, applied. pedal effort as well as greater pedal contact your NISSAN dealer for repair. travel. Low brake fluid warning light: Low fuel warning light ¼ If the brake fluid level is below the The light warns of a low brake fluid level. If the MIN mark on the brake fluid reservoir, This light comes on when the fuel in the tank is light comes on while the engine is running with getting low. Refuel as soon as it is convenient, do not drive until the brake system the parking brake not applied, stop the vehicle preferably before the fuel gauge reaches E. and perform the following: has been checked at a NISSAN dealer. There will be a small reserve of fuel remain- 1. Check the brake fluid level. Add brake fluid ing in the tank when the fuel gauge needle as necessary. See “Brake and clutch fluid” reaches E. in the “Do-it-yourself” section. 2. If the brake fluid level is correct, have the warning system checked by a NISSAN INDICATOR LIGHTS WARNING dealer. Overdrive off indicator light or Anti-lock brake This light comes on during driving when the ¼ Your brake system may not be work- warning light (if so overdrive switch is pressed to prevent over- drive operation. ing properly if the warning light is on. equipped) Driving could be dangerous. If you The O/D OFF indicator light comes on for 2 judge it to be safe, drive carefully to After turning the ignition key to the ON posi- seconds each time the ignition key is turned the nearest service station for re- tion, the light will illuminate. The light will turn ON. This shows the light is functioning prop- pairs. Otherwise, have your vehicle off after about 2 seconds if the system is erly. operational. towed because driving it could be If the O/D OFF indicator light blinks for dangerous. If the light comes on while the engine is approximately 8 seconds after coming on for running, it may indicate that the anti-lock brake ¼ Pressing the brake pedal with the 2 seconds, have your NISSAN dealer check system is not functioning properly. Have the engine stopped and/or low brake fluid the transmission and repair it if necessary. system checked by your NISSAN dealer. level may increase your stopping dis- The automatic transmission is equipped with tance and braking will require greater If an abnormality occurs in the system, the an electronic fail-safe mode. This system al- anti-lock function will cease but the ordinary lows the vehicle to be driven even in the event brakes will continue to operate normally. of damage to the electrical circuits. If this Instruments and controls 2-9

੬ 00.1.17/A33-D/V5.0 ੭ occurs, the gears automatically engage and indicate the cruise control system is not func- vehicle. The lamp should turn off after lock into third gear. tioning properly. Have the system checked by a few driving trips. If the lamp does your NISSAN dealer. not turn off after a few driving trips, have the See the “Driving the vehicle” in the “5. Starting vehicle inspected by an authorized NISSAN and driving” section for fail-safe before visiting Malfunction indicator lamp dealer. You do not need to have your your NISSAN dealer. (MIL) vehicle towed to the dealer. Turn signal/hazard indicator If the malfunction indicator lamp comes on ¼ Malfunction indicator lamp blinking — An lights steady or blinks while the engine is running, it engine misfire has been detected which The light flashes when the turn signal switch may indicate a potential emission control mal- may damage the emission control system. lever or hazard switch is turned on. function. To reduce or avoid emission control system damage: High beam indicator light The malfunction indicator lamp may also come on steady if the fuel filler cap is loose or a) Do not drive at speeds above 45 MPH (Blue) missing, or if the vehicle runs out of fuel. (72 km/h). This light comes on when the headlight high Check to make sure the fuel filler cap is b) Avoid hard acceleration or deceleration. beam is on and goes out when the low beam is installed and closed tightly, and that the ve- c) Avoid steep uphill grades. selected. hicle has at least three gallons of fuel in the d) If possible, reduce the amount of cargo fuel tank. being hauled or towed. Cruise main switch indicator After a few driving trips, the lamp should The malfunction indicator lamp may stop light turn off if no other potential emission control blinking and come on steady. system malfunction exists. The light comes on when the cruise control Have the vehicle inspected by an autho- main switch is pushed. The light goes out Operation rized NISSAN dealer. You do not need to when the main switch is pushed again. When have your vehicle towed to the dealer. the cruise main switch indicator light comes The malfunction indicator lamp will come on in one of two ways: on, the cruise control system is operational. CAUTION Cruise set indicator light ¼ Malfunction indicator lamp on steady — An emission control system malfunction has The light comes on while the vehicle speed is been detected. Check the fuel filler cap. If Continued vehicle operation without controlled by the cruise control system. If the the fuel filler cap is loose or missing, tighten having the emission control system light blinks while the engine is running, it may or install the cap and continue to drive the 2-10 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ b) If engine speed is above 4,000 rpm in a mission only as high as the indicated shift lever checked and repaired as necessary selected gear. Use D range on low fric- position. could lead to poor driveability, reduced tion road surfaces. fuel economy, and possible damage to AUDIBLE REMINDERS If the traction control system indicator light the emission control system. comes on and stays on for an extended period Key reminder chime of time when the system is turned on, have The chime will sound if the driver side door is Traction control system your vehicle checked by your NISSAN dealer. opened while the key is left in the ignition indicator light (if so equipped) Slip indicator light (if so switch (ignition switch is turned off). Remove equipped) the key and take it with you when leaving the The traction control system indicator light vehicle. should come on when you turn the ignition key This light will blink on when your traction to ON. The light will go off as you start the control system is limiting wheel spin. Slippery Light reminder chime engine. If the indicator light does not come on road conditions may exist if the slip indicator The headlights will turn off when the front door or go off, have the TCS checked by your light blinks on. If this happens, adjust your is opened with the light switch on unless the NISSAN dealer. driving accordingly. ignition key is in the ON position. If the light stays on or comes on when you are You may feel or hear the system working, but When you turn the headlight switch ON again driving, there may be a problem with your this is normal. after the lights automatically turn off and when traction control system and it may not operate you open the driver’s door, the lights will not properly. Have the system checked by your The light will blink on for a few seconds after turn off automatically and a chime will sound NISSAN dealer. the traction control system stops limiting wheel spin. instead. See the battery saver system under The traction control system indicator light may “Headlight switch” in this section for details. come on for the following reasons. The slip indicator light also comes on when you turn the ignition key to ON. The light will go Make sure to turn the light switch off when you leave the vehicle. a) If the system is turned off by pressing off as you start the engine. If the light does not the button on the instrument panel, the come on or go off, have the TCS checked by Seat belt warning chime indicator light will come on and stay on. your NISSAN dealer. The traction control sys- To turn the system back on, press the tem operates in all transmission shift lever The chime will sound for about 6 seconds button again. The indicator light will go positions. But the system can upshift the trans- unless the drivers seat belt is securely fas- off. tened. Instruments and controls 2-11

੬ 00.1.17/A33-D/V5.0 ੭ SECURITY SYSTEMS

BRAKE PAD WEAR WARNING The disc brake pads have audible wear warn- ings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard.

IC0005 SIC1228 Your vehicle has two types of security sys- How to activate the vehicle security tems, as follows: system ¼ Vehicle Security System 1. Close all windows. ¼ Nissan Vehicle Immobilizer System The system can be activated even if the The security condition will be shown by the windows are open. security indicator light. 2. Remove the key from the ignition switch. VEHICLE SECURITY SYSTEM 3. Close and lock all doors, hood and trunk lid. The vehicle security system provides visual and audio alarm signals if parts of the vehicle Lock all doors by pressing the LOCK button are disturbed. on the multi-remote controller. When using the multi-remote controller, the hazard indi- cators flash twice to indicate all doors are locked. 2-12 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ 4. Confirm that the SECURITY indicator light ¼ The alarm automatically turns off after ap- the registered Nissan Vehicle Immobilizer Sys- comes on. The SECURITY light glows for proximately 1 minute. However, the alarm tem key. about 30 seconds and then blink. The sys- reactivates if the vehicle is tampered with If the engine fails to start using the registered tem is now activated. If, during this 30 again. The alarm can be shut off by unlock- Nissan Vehicle Immobilizer System key, it may second time period, the door is unlocked by ing a door or trunk lid with the key, or by be due to interference caused by another the key or the multi-remote controller, or the pressing the UNLOCK button on the multi- Nissan Vehicle Immobilizer System key, an ignition key is turned to ACC or ON, the remote controller. automated toll road device or automated pay- system will not activate. The alarm is activated by: ment device on the key ring. Restart the en- ¼ If the key is turned slowly toward the ¼ Opening the door without using the key or gine using the following procedures: front of the vehicle when locking the multi-remote controller. 1. Leave the ignition switch in the ON position door, the system may not activate. If the ¼ for approximately 5 seconds. key is returned beyond the vertical po- Opening the trunk lid without using the key or multi-remote controller. sition toward the rear of the vehicle to 2. Turn the ignition switch to the OFF or LOCK remove the key, the system may be ¼ Opening the hood. position and wait approximately 10 sec- deactivated. If the indicator light fails to onds. glow for 30 seconds, unlock the door How to stop alarm 3. Repeat step 1 and 2 again. once and lock it again. The alarm will stop only by unlocking a door or ¼ Even when the driver and/or passengers trunk lid with the key, or by pressing the 4. Restart the engine while holding the device are in the vehicle, the system will acti- UNLOCK button on multi-remote controller. (which may have caused the interference) vate with all doors, hood and trunk lid The alarm will not stop if the ignition switch is separate from the registered Nissan Ve- locked and ignition key off. Turn the turned to ACC or ON. hicle Immobilizer System key. ignition key to ACC to turn the system If the system does not operate as de- If this procedure allows the engine to start, off. scribed above, have it checked by your NISSAN recommends placing the regis- Vehicle security system operation NISSAN dealer. tered Nissan Vehicle Immobilizer System key on a separate key ring to avoid inter- The security system will give the following NISSAN VEHICLE IMMOBILIZER ference from other devices. alarm: SYSTEM Statement related to section 15 of FCC ¼ The headlights blink and the horn sounds The Nissan Vehicle Immobilizer System will rules for Nissan Vehicle Immobilizer Sys- intermittently. not allow the engine to start without the use of tem (CONT ASSY-IMMOBILIZER) Instruments and controls 2-13

੬ 00.1.17/A33-D/V5.0 ੭ WINDSHIELD WIPER AND WASHER SWITCH This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must ac- cept any interference received, including interference that may cause undesired op- eration.

SIC1228 SIC1322A Security indicator light The windshield wiper and washer operates when the ignition key is in the ON position. If Nissan Vehicle Immobilizer System is mal- functioning, this light will remain on while the Push the lever down to operate the wiper. ignition key is in the ON position. Intermittent operation can be adjusted from 2 If the light still remains on and/or the en- to 13 seconds by turning the knob. gine will not start, see your NISSAN dealer Pull the lever toward you to operate the for Nissan Vehicle Immobilizer System ser- washer. Then the wiper will also operate sev- vice as soon as possible. Please bring all eral times. Nissan Vehicle Immobilizer System keys that you have when visiting your NISSAN dealer for service.

2-14 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ REAR WINDOW AND OUTSIDE MIRROR (if so equipped) DEFOGGER SWITCH WARNING CAUTION

In freezing temperatures the washer so- When cleaning the inner side of the rear lution may freeze on the windshield and window, be careful not to scratch or obscure your vision which may lead to damage the rear window defogger. an accident. Warm the windshield with the defroster before you wash the wind- shield.

CAUTION SIC1502 The following could damage the washer system: To defog/defrost the rear window glass and outside mirrors, start the engine and push the ¼ Do not operate the washer continu- switch on. The indicator light will come on. ously for more than 30 seconds. Push the switch again to turn the defogger off. ¼ Do not operate the washer if the res- It will automatically turn off in approximately 15 ervoir tank is empty. minutes.

Instruments and controls 2-15

੬ 00.1.17/A33-D/V5.0 ੭ HEADLIGHT AND TURN SIGNAL SWITCH position, the headlight low or high beam will turn off. Turn the switch to the position: The front clearance, side marker, tail, license plate and instrument lights will come on. Turn the switch to the position: Headlights will come on and all the other lights remain on.

SIC1229 HEADLIGHT SWITCH tail light, headlight, instrument light and other lights turn on automatically, depending on the Lighting brightness of the surroundings. When the ig- nition key is turned to the OFF position, the Turn the switch to the AUTO position: light will turn off automatically. When the ignition key is in the ON position, the When the light switch is turned to the 2-16 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ passenger’s door is opened. ¼ When the headlight switch remains in the or position after the lights auto- matically turn off, the lights will turn on when the ignition switch is turned to the ON or ACC position from the OFF position.

CAUTION

¼ When you turn on the headlight switch after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the SIC1230 IC1284MA light switch to the OFF position when Be sure not to put anything on top of the you leave the vehicle for extended Instrument brightness control photo sensor located on the top left-hand periods of time, otherwise the battery The instrument brightness control operates side of the instrument panel. The photo will go dead. sensor controls the autolamp; if it is cov- when the light switch is in the or ¼ position. ered, the photo sensor reacts as if it is dark Never leave the light switch on when and the headlights will illuminate. the engine is not running for ex- Turn the control to adjust the brightness of tended periods of time even if the instrument panel lights (except clock) and Battery saver system headlights turn off automatically. power window switch lights. ¼ When the headlight switch is in the or When the control is turned to the right until a position while the ignition switch is in click sound is heard, the light intensity will be the ON position, the lights (including the at maximum. When the control is turned to the front fog light) will automatically turn off 45 left until a click sound is heard, the light will be seconds after the ignition switch has been turned off. turned to the OFF position. However, the lights will turn off if the driver’s or front Instruments and controls 2-17

੬ 00.1.17/A33-D/V5.0 ੭ FOG LIGHT SWITCH (if so equipped) Headlight beam select WARNING To select the high beam, push the lever for- ward. Pull it back to select the low beam. When the daytime running light system Passing signal is active, tail lights on your vehicle are Pulling the lever toward you will flash the not on. It is necessary at dusk to turn on headlight high beam. your headlights. Failure to do so could cause an accident injuring yourself and Daytime running light system others. (Canada only) The headlights automatically illuminate at a TURN SIGNAL SWITCH reduced intensity when the engine is started with the parking brake released. The daytime Turn signal running lights operate with the headlight switch SIC0880 Move the lever up or down to signal the turning in the OFF position or in the position. To turn the fog lights on, turn the headlight Turn the headlight switch to the position direction. When the turn is completed, the turn signals cancel automatically. switch to the position, then turn the for full illumination when driving at night. switch to the position. To turn them off, If the parking brake is applied before the Lane change signal turn the switch to the OFF position. engine is started, the daytime running lights do To indicate a lane change, move the lever up The headlights must be on for the fog lights to not illuminate. The daytime running lights illu- or down to the point where lights begin flash- operate. minate once the parking brake is released. ing. The daytime running lights will remain on until the ignition switch is turned off.

2-18 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ HAZARD WARNING FLASHER HORN SWITCH

¼ Do not use the hazard warning flash- ers while moving on the highway un- less unusual circumstances force you to drive so slowly that your ve- hicle might become a hazard to other traffic. ¼ Turn signals do not work when the hazard warning flasher lights are on.

The flasher can be actuated with the ignition switch either off or on. SIC1232 SIC1280 Push the switch on to warn other drivers when To sound the horn, push the center pad area of you must stop or park under emergency con- the steering wheel. ditions. All turn signal lights will flash. Some state laws may prohibit the use of the hazard warning flasher switch while driv- ing.

WARNING

¼ If stopping for an emergency, be sure to move the vehicle well off the road.

Instruments and controls 2-19

੬ 00.1.17/A33-D/V5.0 ੭ HEATED SEATS (if so equipped)

The heater is controlled by a thermostat, automatically turning the heater on and off. ¼ Any liquid spilled on the heated seat The indicator light will remain on as long as should be removed immediately with the switch is on. a dry cloth. 3. When the vehicle’s interior is warmed, or ¼ When cleaning the seat, never use before you leave the vehicle, be sure to turn gasoline, thinner, or any similar ma- the switch off. terials. ¼ If any abnormalities are found or the CAUTION heated seat does not operate, turn the switch off and have the system ¼ The battery could run down if the seat checked by your NISSAN dealer. heater is operated while the engine is SIC0693 not running. The front seats are warmed by built-in heaters. ¼ Do not use the seat heater for ex- The switches located on the center console tended periods or when no one is can be operated independently of each other. using the seat. 1. Start the engine. ¼ Do not put anything on the seat which insulates heat, such as a blanket, 2. Select heat range. cushion, seat cover, etc. Otherwise, ¼ For low heat, press the top of the switch. the seat may become overheated. ¼ For high heat, press the bottom of the ¼ Do not place anything hard or heavy switch. on the seat or pierce it with a pin or ¼ For no heat, the switch has a center OFF similar object. This may result in position between low and high. damage to the heater. The indicator light in the switch will illumi- nate when low or high is selected. 2-20 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ TRACTION CONTROL SYSTEM (TCS) CANCEL SWITCH (if so POWER OUTLET equipped)

draw. Do not use double adapters or more than one electrical accessory. ¼ Use this power outlet with the engine running. (If the engine is stopped, this could result in a discharged bat- tery.) ¼ Avoid using when the air conditioner, headlights or rear window defogger is on. ¼ Before inserting or disconnecting a plug, be sure to turn off the power SIC1065 SIC1533 switch of electrical accessory being To cancel the Traction Control System (TCS), The power outlet is for powering electrical used or the ACC power of the vehicle. push the TCS cancel switch. The indicator accessories such as cellular telephones. ¼ Push the plug in as far as it will go. If will come on. Push it again to turn the system back on. good contact is not made, the plug CAUTION may overheat or the internal tempera- See “Traction control system” in the “5. Start- ture fuse may blow. ing and driving” section. ¼ Use caution as the socket and plug ¼ When not in use, be sure to close the may be hot during or immediately cap. Do not allow water to contact the after use. socket. ¼ This power outlet is not designed for use with a cigarette lighter unit. ¼ Do not use with accessories that ex- ceed a 12 volt, 120W (10A) power

Instruments and controls 2-21

੬ 00.1.17/A33-D/V5.0 ੭ CIGARETTE LIGHTER AND STORAGE ASHTRAY (accessory) WARNING

The cigarette lighter should not be used while driving so full attention may be given to vehicle operation.

CAUTION

The cigarette lighter socket is a power source for the cigarette lighter element SIC1233 only. The use of the cigarette lighter SIC1243 socket as a power source for any other The cigarette lighter element is an accessory. accessory is not recommended. TRAYS A genuine NISSAN cigarette lighter unit can be purchased from your local NISSAN dealer. WARNING The cigarette lighter operates when the igni- tion switch is in the ACC or ON position. The storage tray should not be used Push the lighter in all the way. When the lighter while driving so full attention may be is heated, it will spring out. given to vehicle operation. Return the lighter to its original position after use.

2-22 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ CAUTION

¼ Do not use for anything other than glasses. ¼ Do not leave glasses in the glasses case while parking in direct sunlight. The heat may damage the glasses.

SIC1238 SIC1279A GLASSES CASE CUP HOLDER The glasses case can be opened by pushing the button. WARNING

WARNING The cup holder should not be used while driving so full attention may be given to The glasses case should not be used vehicle operation. while driving so full attention may be given to vehicle operation. For larger cups, remove the inside tray.

Instruments and controls 2-23

੬ 00.1.17/A33-D/V5.0 ੭ SIC1235 SPA0388 GLOVE BOX CAUTION When locking or unlocking the glove box, use the master key. ¼ Avoid abrupt starting and braking when the cup holder is being used to The glove box may be opened by pulling the handle. prevent spilling the drink. If the liquid is hot, it can scald you or your pas- senger. WARNING ¼ Use only soft cups in the cup holder. Keep glove box lid closed while driving Hard objects can injure you in an to help prevent injury in an accident or a accident. sudden stop.

2-24 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ SIC1242A CARGO NET (if so equipped) The cargo net helps keep packages in the cargo area from moving around while your vehicle is driven. To install the cargo net, attach the hooks to the retainers. SIC1236 To remove the cargo net, detach the hooks CONSOLE BOX from the cargo net retainers. used while driving so full attention may WARNING be given to vehicle operation.

The center console box should not be

Instruments and controls 2-25

੬ 00.1.17/A33-D/V5.0 ੭ WINDOWS

WARNING and become trapped in a window. Unattended children could become ¼ Properly secure all cargo to help pre- involved in serious accidents. vent it from sliding or shifting. ¼ Be sure to secure hooks into the The power windows operate when the ignition key is in the ON position and for about 45 retainers. The cargo restrained in the seconds, after the ignition key is turned to the net must not exceed 30 lb (13.6 kg) or OFF position. If the driver’s door or the front the net may not stay secured. passenger’s door is opened during this period of about 45 seconds, power to the windows is canceled. To open or close the window, push down or SIC0929 pull up the switch and hold it. The main switch (driver side switches) will open or close all the POWER WINDOWS windows. WARNING

¼ Make sure that all passengers have their hands, etc. inside the vehicle before closing the windows. Use the window lock switch to prevent unex- pected use of the power windows. ¼ Do not leave children unattended in- side the vehicle. They could unknow- ingly activate switches or controls

2-26 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ The auto reverse function can be activated when the driver’s window is closed by auto- matic operation when the ignition key is in the ON position or for about 45 seconds after the ignition key is turned to the OFF position. ¼ Depending on the environment or driv- ing conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the window occurs.

WARNING

SIC0627B SPA0980 There are some small distances imme- The passenger side switch will open or close Automatic operation diately before the closed position which only the corresponding window. To open or cannot be detected. Make sure that all close the window, hold the switch down or up. To fully open or close the driver’s side window, passengers have their hands, etc., in- completely press or lift the switch and release side the vehicle before closing the win- Locking passenger’s windows it; it need not be held. The window will auto- dow. When the lock button is pushed in, only the matically open or close all the way. To stop the driver side window can be opened or closed. window, just press the switch on the opposite Push it in again to cancel. side. Auto reverse function (For driver’s window) If the control unit detects something caught in the driver’s window as it moves up, the window will be immediately lowered.

Instruments and controls 2-27

੬ 00.1.17/A33-D/V5.0 ੭ SUNROOF (if so equipped)

To close the roof, press and hold the switch to the side. WARNING Automatic operation There are some small distances imme- To fully open or close the roof, completely diately before the closed position which press the switch to the or side and cannot be detected. Make sure that all release it; it need not be held. The roof will passengers have their hands, etc., in- automatically open or close all the way. To side the vehicle before closing the sun- stop the roof, just press the switch toward the roof. opposite. A light press on the switch will cause the roof to open or close until the switch is released. Tilting the sunroof To tilt up, first close the sunroof, then press SIC1293 Auto reverse function (When closing and hold the side of the tilt switch. To tilt the sunroof) AUTOMATIC SUNROOF down the sunroof, press and hold the side. If the control unit detects something caught in The sunroof will only operate when the ignition the sunroof as it moves to the front, the Sun shade key is in the ON position. sunroof will immediately open backward. Open or close the sun shade by sliding it The automatic sunroof is operational for about The auto reverse function can be activated backward or forward. 45 seconds, even if the ignition key is turned to when the sunroof is closed by automatic op- The shade will open automatically when the the OFF position. If the driver’s door or the eration when the ignition key is in the ON sunroof is opened. However, it must be closed front passenger’s door is opened during this position or for about 45 seconds after the manually. period of about 45 seconds, power to the ignition key is turned to the OFF position. sunroof is canceled. ¼ Depending on the environment or driv- Sliding the sunroof ing conditions, the auto reverse function To open the roof, press and hold the switch to may be activated if an impact or load similar to something being caught in the the side. sunroof occurs. 2-28 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ CLOCK INTERIOR LIGHT

WARNING

¼ In an accident you could be thrown from the vehicle through an open sunroof. Always use seat belts and child restraints. ¼ Do not allow anyone to stand up or extend any portion of their body out of the opening while the vehicle is in motion or while the sunroof is clos- ing. SIC0910 IC1226 The digital clock displays time when the igni- CEILING CAUTION tion key is in ACC or ON. The ceiling light has a three-position switch. If the power supply is disconnected, the clock ¼ Remove water drops, snow, ice or will not indicate the correct time. Readjust the When the switch is in the center k position, the sand from the sunroof before open- time. light will illuminate when a door is opened. ing. ADJUSTING THE TIME The light will stay on for about 30 seconds ¼ Do not place any heavy object on the when: sunroof or surrounding area. Push the H button to adjust the hour. ¼ The doors are unlocked by the multi-remote Push the M button to adjust the minute. controller, a key or the lock-unlock switch If the sunroof does not close while all doors are closed. Have your NISSAN dealer check and repair ¼ The driver’s door is opened and then closed the sunroof. while the key is removed from the ignition switch. Instruments and controls 2-29

੬ 00.1.17/A33-D/V5.0 ੭ PERSONAL LIGHT

¼ The key is removed from the ignition switch These lights will turn on again when any of the while all doors are closed. above operations is performed after the lights have turned off automatically. (The lights will The ceiling light will turn off while the 30 turn off 30 minutes after the latest operation of second timer is activated, when: the above as well.) ¼ The driver’s door is locked either with the multi-remote controller, a key, or the lock- CAUTION unlock switch. ¼ The ignition switch is turned ON. ¼ Turn off the interior, personal and vanity mirror lights when you leave When the interior light switch or personal the vehicle. light switch is in the ON position, the inte- rior, personal, and vanity mirror lights will ¼ Do not use for extended periods of automatically turn off 30 minutes after the time with the engine stopped. This IC1019-B ignition switch has been turned to the OFF could result in a discharged battery. position. To turn on the light again, insert When the interior light or the personal light the key into the ignition switch and move it switch is in the ON position, the interior, to the ON position. personal, and vanity mirror lights will auto- matically turn off 30 minutes after the igni- After the above procedure, the interior, per- tion switch has been turned to the OFF sonal, and vanity mirror lights will automati- position. To turn on the light again, insert cally turn off 30 minutes after the latest opera- the key into the ignition switch and move it tion of the following with the ignition switch in to the ON position. the ACC or OFF position: After the above procedure, the interior, per- ¼ Opening or closing any door sonal, or vanity mirror lights will automatically ¼ Locking or unlocking with the multi-remote turn off 30 minutes after the latest operation of controller, a key or the lock-unlock switch. the following with the ignition switch in the ACC or OFF position: ¼ Inserting or removing a key from the ignition switch ¼ Opening or closing any door 2-30 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ VANITY MIRROR LIGHT (if so equipped) CAUTION

¼ Turn off the interior, personal and vanity mirror lights when you leave the vehicle. ¼ Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.

IC1163-B SIC0186 ¼ Locking or unlocking with the multi-remote The light on the vanity mirror will turn on when controller, a key or the lock-unlock switch. the cover on the vanity mirror is opened. ¼ Inserting or removing a key from the ignition When the interior light or the personal light switch switch is in the ON position, the interior, personal, and vanity mirror lights will auto- These lights will turn on again when any of the matically turn off 30 minutes after the igni- above operations is performed after the lights tion switch has been turned to the OFF have turned off automatically. (The lights will position. To turn on the light again, insert turn off 30 minutes after the latest operation of the key into the ignition switch and move it the above as well.) to the ON position.

Instruments and controls 2-31

੬ 00.1.17/A33-D/V5.0 ੭ INTEGRATED HomeLink TRUNK LIGHT UNIVERSAL TRANSCEIVER (if so equipped) The light illuminates when the trunk lid is The Integrated HomeLink Universal Trans- opened. When the trunk lid is closed, the light ceiver provides a convenient way to consoli- WARNING will go off. date the functions of up to three individual hand-held transmitters into one built-in device. ¼ Do not use the Integrated HomeLink The Integrated HomeLink Universal Trans- Universal Transceiver with any ga- ceiver power will automatically turn off 30 rage door opener that lacks safety minutes after the ignition switch has been stop and reverse features as required turned to the off position. by federal safety standards. (These Integrated HomeLink Universal Transceiver: standards became effective for ¼ Will operate most Radio Frequency (RF) opener models manufactured after devices such as garage doors, gates, home April 1, 1982). A garage door opener and office lighting, entry door locks and which cannot detect an object in the security systems. path of a closing garage door and then automatically stop and reverse, ¼ Is powered by your vehicle’s battery. No separate batteries are required. If the vehi- does not meet current federal safety cle’s battery is discharged or is discon- standards. Using a garage door nected, HomeLink will retain all program- opener without these features in- ming. creases the risk of serious injury or death. Once the Integrated HomeLink Universal Transceiver is programmed, retain the ¼ During programming, your garage original transmitter for future programming door or gate may open or close. Make procedures (i.e., new vehicle purchases). sure that people and objects are clear Upon sale of the vehicle, the programmed of the garage door or gate that you Integrated HomeLink Universal Trans- are programming. ceiver buttons should be erased for secu- rity purposes. For additional information, ¼ Your vehicle’s engine should be refer to “Programming HomeLink ” later in turned off while programming the In- this section.

2-32 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ 3. Using both hands, simultaneously push the tegrated HomeLink Universal Trans- hand-held transmitter button and the de- ceiver. sired HomeLink button. Do not release the buttons until step 4 has been completed. NOTE: Some garage door openers may require the procedures noted under “Canadian Programming”. 4. The HomeLink indicator light will flash, first slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. The rapid flashing light SPA0609A indicates the Integrated HomeLink Univer- sal Transceiver has been successfully pro- PROGRAMMING HomeLink grammed. 1. With the ignition key in the OFF position, To program the remaining two buttons, follow press and hold the two outside buttons, and steps 2 through 4. release when the indicator light begins to If, after repeated attempts, you do not suc- flash (approximately 20 seconds). This pro- cessfully program the Integrated HomeLink cedure erases the factory set default codes Universal Transceiver to learn the signal of the and does not have to be followed when hand-held transmitter, refer to “Rolling Code programming additional hand-held trans- Programming” later in this section. mitters. PROGRAMMING HomeLink FOR 2. Hold the end of the hand-held transmitter CANADIAN CUSTOMERS (from the device you wish to train) approxi- mately 2 to 5 inches (50 to 127 mm) away Prior to 1992, D.O.C. regulations required from the surface of HomeLink keeping the hand-held transmitters to stop transmitting af- indicator light in view. ter 2 seconds. To program your hand-held Instruments and controls 2-33

੬ 00.1.17/A33-D/V5.0 ੭ transmitter to HomeLink , continue to press ¼ replace the hand-held transmitter batteries indicator light begins to flash (approximately and hold the HomeLink button (note steps 2 with new batteries. 20 seconds). through 4 under “Programming HomeLink ”) ¼ position the hand-held transmitter with its while you press and re-press (“cycle”) your ROLLING CODE PROGRAMMING battery area facing away from the hand-held transmitter every 2 seconds until HomeLink surface. Rolling code garage door openers (or other the indicator light flashes rapidly (indicating rolling code devices) which are “code pro- successful programming). ¼ press and hold both the HomeLink and tected” and manufactured after 1996, may be NOTE: hand-held transmitter buttons without inter- determined by the following. ruption. If programming a garage door opener, etc., A. Reference the garage door opener Owner’s ¼ it is advised to unplug the device during position the hand-held transmitter 2 to 5 Manual for verification. the “cycling” process to prevent possible inches (50 to 127 mm) away from the B. The hand-held transmitter appears to pro- damage to the garage door opener compo- HomeLink surface. Hold the transmitter in gram the Integrated HomeLink Universal nents. that position for up to 15 seconds. If HomeLink is not programmed within that Transceiver but does not activate the ga- OPERATING THE INTEGRATED time, try holding the transmitter in another rage door. HomeLink UNIVERSAL position - keeping the indicator light in view C. Press and hold the trained HomeLink but- TRANSCEIVER at all times. ton. If the garage door opener has the rolling code feature, the HomeLink indica- If you continue to have programming difficul- The Integrated HomeLink Universal Trans- tor light will flash rapidly, then remains on ceiver (once programmed) may now be used ties, please contact the NISSAN Consumer after 2 seconds. to activate the garage door, etc. To operate, Affairs Department. The phone numbers are simply press the appropriate programmed In- located in the Foreword of this Owner’s To program the Integrated HomeLink Univer- tegrated HomeLink Universal Transceiver Manual. sal Transceiver to a garage door opener with button. The red indicator light will illuminate the rolling code feature, follow these instruc- while the signal is being transmitted. CLEARING THE PROGRAMMED tions after completing the “Programming INFORMATION HomeLink ” (the aid of a second person may PROGRAMMING make the following procedures quicker and PROBLEM-DIAGNOSIS Individual buttons cannot be cleared, however easier). to clear all programming, press and hold the If the HomeLink does not quickly learn the two outside buttons and release when the 1. Locate the training button on the garage hand-held transmitter information: door opener motor unit. Exact location and 2-34 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ color of the button may vary by garage door versal Transceiver button, complete the follow- manufacturer or dealer of those devices for opener brand. If there is difficulty locating ing. additional information. the training button, reference the garage 1. Press and hold the desired HomeLink When your vehicle is recovered, you will door opener Owner’s Manual. button. Do not release the button until step need to reprogram the Integrated 2. Press the training button on the garage 4 has been completed. HomeLink Universal Transceiver with door opener motor unit (which may activate your new transmitter information. 2. When the indicator light begins to flash a training light). slowly (after 20 seconds), position the FCC Notice: NOTE: hand-held transmitter 2 to 5 inches (50 to This device complies with FCC rules part 127 mm) away from the HomeLink sur- Following step 2, there are 30 seconds 15. Operation is subject to the following in which to initiate step 3. face. two conditions: (1) This device may not cause harmful interference and (2) This 3. Press and hold the hand-held transmitter 3. Firmly press and release the programmed device must accept any interference that HomeLink button. Press and release the button. may be received, including interference HomeLink button a second time to com- 4. The HomeLink indicator light will flash, that may cause undesired operation. plete the training process. (Some garage first slowly and then rapidly. When the door openers may require you to do this The transmitter has been tested and com- indicator light begins to flash rapidly, re- plies with FCC and DOC/MDC rules. procedure a third time to complete the lease both buttons. training.) Changes or modifications not expressly The Integrated HomeLink Universal Trans- approved by the party responsible for com- The garage door opener should now recognize ceiver button has now been reprogrammed. pliance could void the user’s authority to the Integrated HomeLink Universal Trans- The new device can be activated by pushing operate the device. ceiver and activate when the HomeLink but- the HomeLink button that was just pro- DOC: ISTC 1763K1313 ton is pressed. The remaining two buttons may grammed. This procedure will not affect any now be programmed (if not yet programmed, other programmed HomeLink buttons. FCC I.D.: CB2V67690 follow steps 2 through 4 in the “Programming HomeLink ” procedures earlier in this section). IF YOUR VEHICLE IS STOLEN REPROGRAMMING A SINGLE If your vehicle is stolen, you should change the HomeLink BUTTON codes of any non-rolling code device that has been programmed into HomeLink . Consult To reprogram an Integrated HomeLink Uni- the Owner’s Manual of each device or call the Instruments and controls 2-35

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

2-36 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

Instruments and controls 2-37

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

2-38 Instruments and controls

੬ 00.1.17/A33-D/V5.0 ੭ 3 Pre-driving checks and adjustments

Keys ...... 3-2 Interior trunk lid release ...... 3-11 Doors...... 3-3 Fuel filler lid...... 3-12 Locking with key...... 3-3 Opener operation ...... 3-12 Locking with inside lock knob...... 3-3 Fuel filler cap...... 3-12 Locking with power door lock switch...... 3-4 Steering wheel ...... 3-13 Child safety rear door lock ...... 3-4 Tilt operation...... 3-13 Multi-remote control system...... 3-4 Sun visors ...... 3-14 How to use multi-remote control system...... 3-5 Mirrors ...... 3-14 Battery replacement ...... 3-8 Inside mirror ...... 3-14 Hood...... 3-9 Automatic anti-dazzling inside mirror (if so Trunk lid ...... 3-10 equipped)...... 3-14 Opener operation ...... 3-10 Outside mirrors...... 3-15 Key operation ...... 3-11

੬ 00.1.17/A33-D/V5.0 ੭ KEYS

hicle. New keys must be registered to the Nissan Vehicle Immobilizer System compo- nents in your vehicle by your NISSAN dealer. At this time, you should bring all Nissan Ve- hicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is because the registration process will erase all memory of the Nissan Vehicle Immobilizer System components.

SIC1239B SPA1207B You can only drive your vehicle using the safe place (such as your wallet), not in the master or valet keys which are registered to vehicle. NISSAN does not record any key the Nissan Vehicle Immobilizer System com- numbers so it is very important to keep track of ponents in your vehicle. These keys have a your key number plate. transponder chip in the key head. A key number is only necessary when you The master key can be used for all the locks. have lost all keys and do not have one to duplicate from. If you still have a key, this key The valet key cannot be used for the trunk lid can be duplicated by your NISSAN dealer. or glove box locks. Nissan Vehicle Immobilizer System KEY - To protect belongings when you leave a key Master and Valet keys: with someone, give them the valet key only. The key number is necessary when you need Never leave these keys in the vehicle. extra Nissan Vehicle Immobilizer System Record the key number on the key number keys. As many as 5 Nissan Vehicle Immobi- plate supplied with your keys and keep it in a lizer System keys can be used with one ve- 3-2 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ DOORS

WARNING

¼ Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintention- ally opening the doors, and will help keep out intruders.

¼ Before opening any door, always look SPA0084 SPA0085 for and avoid oncoming traffic. LOCKING WITH KEY LOCKING WITH INSIDE LOCK ¼ Do not leave children unattended in- KNOB side the vehicle. They could unknow- Power ingly activate switches or controls. To individually lock the doors from the outside The power door lock system allows you to lock move the inside lock knob to the LOCK posi- Unattended children could become or unlock all doors simultaneously. involved in serious accidents. tion, then close the door. To unlock, pull up the ¼ Turning the driver’s door key to the front of inside lock knob to the unlock position. the vehicle will lock all doors. When locking the door without a key, be ¼ Turning the driver’s door key one time to sure not to leave the key inside the vehicle. the rear of the vehicle will unlock the corre- sponding door. From that position, return- ing the key to neutral (where the key can only be removed and inserted) and turning it to the rear again within 5 seconds will unlock all doors. Pre-driving checks and adjustments 3-3

੬ 00.1.17/A33-D/V5.0 ੭ MULTI-REMOTE CONTROL SYSTEM It is possible to lock/unlock all doors to release the trunk lid and activate the panic alarm by using the remote controller from outside the vehicle. Before locking the doors, make sure the key is not left in the vehicle. The remote controller can operate at a dis- tance of approximately 33 ft (10 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.) As many as four remote controllers can be used with one vehicle. For information con- cerning the purchase and use of additional remote controllers, contact your NISSAN SPA0944 SPA0086 dealer. LOCKING WITH POWER DOOR CHILD SAFETY REAR DOOR The multi-remote controller will not function LOCK SWITCH LOCK when: ¼ All door locks will be engaged when the power Child safety locking helps prevent doors from the battery is dead, door lock switch is moved to the LOCK posi- being opened accidentally, especially when ¼ the distance between the vehicle and the tion with the driver’s or front passenger’s door small children are in the vehicle. remote controller is over 33 ft (10 m). open. Then close the door and all doors will be When the lever is in the lock position, the locked. The panic alarm will not activate when the rear door can be opened only from the key is in the ignition switch. When the power door lock switch is moved to outside. the LOCK position with front doors open while a key is in the ignition switch, all doors will lock CAUTION once and then unlock automatically. The following conditions or occurrences will damage the remote controller.

3-4 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ In hazard indicator and horn mode, when the ¼ Do not allow the remote controller to LOCK button is pushed, the hazard indicator become wet. flashes twice and the horn chirps once. When the UNLOCK button is pushed, the hazard ¼ Do not drop the remote controller. indicator flashes once. ¼ Do not strike the remote controller If hazard indicator and horn mode is not nec- sharply against another object. essary, you can switch to hazard indicator only mode by following the switching procedure. ¼ Do not place the remote controller for an extended period in an area where In hazard indicator only mode, when the LOCK temperatures exceed 140°F (60°C). button is pushed, the hazard indicator flashes twice. When the UNLOCK button is pushed, If a multi-remote controller is lost or neither the hazard indicator nor the horn oper- stolen, NISSAN recommends erasing ates. the ID code of that controller. This will (Switching procedure) prevent the controller from unautho- rized use to unlock the vehicle. For in- Push the LOCK and UNLOCK buttons on the formation regarding the erasing proce- multi-remote controller simultaneously for dure, please contact an authorized more than 2 seconds to switch from one mode to the other. NISSAN dealer. When pushing the buttons to set hazard indi- cator only mode, the hazard indicator flashes 3 HOW TO USE MULTI-REMOTE times. CONTROL SYSTEM When pushing the buttons to set hazard indi- Setting hazard indicator and horn cator and horn mode, the hazard indicator flashes once and the horn chirps once. mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

Pre-driving checks and adjustments 3-5

੬ 00.1.17/A33-D/V5.0 ੭ SPA1260 Locking doors 5. The hazard indicator flashes twice and the horn chirps once. 1. Remove the ignition key.*1 ¼ When the LOCK button is pushed with all 2. Close all the doors.*2 doors locked, the hazard indicator flashes 3. Push the LOCK button on the multi-remote twice and the horn chirps once as a re- minder that the doors are already locked. controller. 4. All the doors will lock. *1: Doors lock with the remote controller while All of the doors will lock when the LOCK a key is in the ignition switch. However, the button on the multi-remote controller is panic alarm will not activate when the key pushed even though a door remains open is in the ignition switch. and/or the ignition key is in the ON posi- *2: Doors lock with the remote controller while tion. any door is open. However, hazard indica- tor and horn mode will not function.

3-6 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ in the center k position with the ignition key in any position except the ON position. 2. Push the UNLOCK button on the multi- remote controller again within 5 seconds. ¼ All doors unlock ¼ The hazard indicator flashes once if all doors are completely closed. If the following operation is not carried out within 5 minutes after pressing the “UNLOCK” button, all doors will be locked automatically. ¼ When any door is not opened. ¼ When the ignition key is not set in the ON position. The interior light can be turned off without waiting for 30 seconds by turning the ignition switch to the ON position or by locking the doors with the multi-remote controller.

SPA0981 Releasing the trunk lid ¼ The hazard indicator flashes once if all 1. Push the trunk button on the multi-remote Unlocking doors controller for longer than 0.5 second with doors are completely closed with the igni- the key removed from the ignition key cyl- 1. Push the UNLOCK button on the multi- tion key in any position except the ON inder. remote controller once. position. 2. The trunk lid opens. ¼ Only the driver’s door unlocks ¼ The interior light turns on and the light timer activates for 30 seconds when the switch is The trunk lid will not open when the trunk lid Pre-driving checks and adjustments 3-7

੬ 00.1.17/A33-D/V5.0 ੭ cancel lever is in the CANCEL position. Recommended battery: Sanyo CR2025 or It can be opened only with the key. equivalent See “Trunk lid” later in this section for cancel Make sure that the ⊕ side faces the lever. bottom case. Using the panic alarm 3. Close the lid securely. If you are near your vehicle and feel threat- 4. Push the remote controller button two or ened, you may activate the alarm to call atten- three times to check its operation. tion as follows: See your NISSAN dealer if you need any 1. Push the PANIC button on the remote assistance for replacement. controller for longer than 0.5 seconds. If the battery is removed for any reason 2. The theft warning alarm and headlights will other than replacement, perform step 4 stay on for 30 seconds. above. 3. The panic alarm stops when: ¼ Be careful not to touch a circuit board ¼ It has run for 30 seconds, or and a battery terminal. ¼ The LOCK or the UNLOCK button is ¼ An improperly disposed battery can pressed, or harm the environment. Always confirm local regulations for battery disposal. ¼ The panic button or the trunk lid release button is pushed on the multi-remote con- ¼ The remote controller is water-resistant; troller for longer than 0.5 seconds. SPA1046 however, if it does get wet, immediately wipe completely dry. BATTERY REPLACEMENT ¼ When changing batteries, do not let dust Replace the battery as follows: or oil get on the controller. 1. Open the lid using a suitable tool. FCC Notice: 2. Replace the battery with a new one. Changes or modifications not expressly approved by the manufacturer compliance 3-8 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ HOOD could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This de- vice may not cause harmful interference, and (2) this device must accept any inter- ference received, including interference that may cause undesired operation of the device.

SPA0984

1. Pull the hood lock release handle k1 lo- cated below the instrument panel; the hood WARNING will then spring up slightly. 2. Move the lever k2 at the front of the hood ¼ Make sure the hood is completely with your fingertips and raise the hood. closed and latched before driving. 3. When closing the hood, slowly close the Failure to do so could cause the hood hood and make sure it locks into place. to fly open and result in an accident. ¼ If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.

Pre-driving checks and adjustments 3-9

੬ 00.1.17/A33-D/V5.0 ੭ TRUNK LID

WARNING

¼ Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Precautions when starting and driving” in the “5. Starting and driv- ing” section for exhaust gas. ¼ Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously SPA0095 injured. Keep the car locked with the trunk closed when not in use, and Cancel lever prevent children’s access to car keys. When the lever is in the cancel position, the trunk lid cannot be opened with the trunk lid release button. It can be opened only with the master key.

SPA0985 OPENER OPERATION The trunk lid release button is located under the driver’s arm rest. To open the trunk lid, pull the release button. To close, push the trunk lid down securely. 3-10 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ vides a means of escape for children and adults in the event they become locked inside the trunk. The handle is located on the back side of the trunk lid inside the trunk compartment. To open the trunk lid from the inside, pull the release handle towards you until the lock releases and push up on the trunk lid. The release lever is made of a material that glows in the dark after a brief exposure to ambient light.

SPA0992 SPA1208 KEY OPERATION INTERIOR TRUNK LID RELEASE To open the trunk lid, turn the key clockwise. To close, lower and push the trunk lid down WARNING securely. Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously in- jured. Keep the car locked, with the trunk closed, when not in use, and pre- vent children’s access to car keys.

The interior trunk lid release mechanism pro- Pre-driving checks and adjustments 3-11

੬ 00.1.17/A33-D/V5.0 ੭ FUEL FILLER LID

SPA0986 SPA0653 OPENER OPERATION FUEL FILLER CAP ously injured if it is misused or mis- To open the fuel filler lid, push the opener The fuel filler cap is a ratcheting type. Tighten handled. Always stop the engine and switch. To lock, close the fuel filler lid securely. the cap clockwise until ratcheting clicks are do not smoke or allow open flames or heard. sparks near the vehicle when refuel- Put the fuel filler cap on the cap holder while ing. refueling. ¼ Fuel may be under pressure. Turn the cap one-half turn, and wait for any WARNING hissing sound to stop to prevent fuel from spraying out and possible per- ¼ Gasoline is extremely flammable and sonal injury. Then remove the cap. highly explosive under certain condi- ¼ Do not attempt to top off the fuel tank tions. You could be burned or seri-

3-12 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ STEERING WHEEL

after the fuel pump nozzle shuts off minate. If the lamp illuminates automatically. because the fuel filler cap is loose or Continued refueling may cause fuel missing, tighten or install the cap and overflow, resulting in fuel spray and continue to drive the vehicle. The possibly a fire. lamp should turn off after a few driving trips. If the lamp does ¼ Use only a genuine fuel filler cap as a not turn off after a few driving trips, replacement. It has a built-in safety have the vehicle inspected by an au- valve needed for proper operation of thorized NISSAN dealer. the fuel system and emission control system. An incorrect cap can result in ¼ For additional information, see the a serious malfunction and possible “Malfunction indicator lamp (MIL)” in injury. the “2. Instruments and controls” SPA0234 section. ¼ Never pour fuel into the throttle body to attempt to start your vehicle. TILT OPERATION Pull the lock lever and while holding down, adjust the steering wheel up or down to the CAUTION desired position. Push the lock lever back into place to lock the ¼ If fuel is spilled on the car body, flush steering wheel in place. it away with water to avoid paint dam- age. WARNING ¼ Tighten until the fuel filler cap clicks. Failure to tighten the fuel filler cap Do not adjust the steering wheel while properly may cause the mal- driving. You could lose control of your function indicator lamp (MIL) to illu- vehicle and cause an accident.

Pre-driving checks and adjustments 3-13

੬ 00.1.17/A33-D/V5.0 ੭ SUN VISORS MIRRORS

SPA0991 SPA0470 SPA1109 INSIDE MIRROR AUTOMATIC ANTI-DAZZLING CAUTION The night position will reduce glare from the INSIDE MIRROR (if so equipped) headlights of vehicles behind you at night. The inside mirror is designed so that it auto- Store the main sun visor after storing matically changes reflection according to the the extension sun visor. WARNING intensity of the headlight of the following ve- hicle. Use the night position only when neces- When the inside mirror is in the AUTO position, sary, because it reduces rear view clar- excessive glare from the headlights of the ity. vehicle behind you will be reduced. When the switch of the inside mirror is in the OFF position, the inside mirror will operate nor- mally.

3-14 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ ignition switch is in the ACC or ON position. Turn the control knob to right or left to select the right or left outside mirror, then adjust.

SPA0987 MPA0008 OUTSIDE MIRRORS Foldable outside mirrors Push the outside mirror backward to fold it. WARNING

Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use inside mirror or glance over your shoulder to properly judge distances to other objects.

The outside mirror will operate only when the Pre-driving checks and adjustments 3-15

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

3-16 Pre-driving checks and adjustments

੬ 00.1.17/A33-D/V5.0 ੭ 4 Heater, air conditioner and audio systems

Ventilators ...... 4-2 Audio system...... 4-12 Heater and air conditioner (Manual) ...... 4-3 FM radio reception ...... 4-12 Controls ...... 4-3 AM radio reception ...... 4-13 Heater operation...... 4-4 Audio operation precautions ...... 4-13 Air conditioner operation ...... 4-5 FM-AM radio with cassette player...... 4-15 Air flow charts...... 4-6 FM-AM radio with cassette player and compact disc Heater and air conditioner (Automatic) (if so (CD) player ...... 4-19 equipped) ...... 4-9 CD care and cleaning ...... 4-24 Automatic operation ...... 4-9 Steering switch for audio control (if so Manual operation...... 4-10 equipped)...... 4-24 Ambient temperature switch (AMB) ...... 4-11 Antenna ...... 4-25 Operating tips ...... 4-11 Car phone or CB radio ...... 4-25 Servicing air conditioner...... 4-11

੬ 00.1.17/A33-D/V5.0 ੭ VENTILATORS

SAA0373 SAA0374 Adjust the air flow direction of ventilators. Open or close, and adjust the air flow direction of ventilators. : This symbol indicates that the vents are closed when the vent switch is moved to the left. : This symbol indicates that the vents are open when the vent switch is moved to the right.

4-2 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ HEATER AND AIR CONDITIONER (Manual)

CONTROLS Fan control dial This dial turns the fan on and off, and controls fan speed. Air flow control buttons These buttons allow you to select the air flow outlets. — Air flows from center and side venti- lators. — Air flows from center and side venti- SAA0468 lators and foot outlets. — Air flows mainly from foot outlets. animals. WARNING — Air flows from defroster outlets and ¼ Do not use the recirculation mode for foot outlets. ¼ The air conditioner cooling function long periods as it may cause the operates only when the engine is run- interior air to become stale and the — Air flows mainly from defroster out- lets. ning. windows to fog up. ¼ Do not leave children, impaired ¼ Positioning of the heating or air con- Temperature control/MAX A/C lever adults, or pets alone in your vehicle. ditioning controls should not be done This lever allows you to adjust the temperature On hot, sunny days, temperatures in while driving, so full attention may be of the outlet air. given to vehicle operation. a closed vehicle could quickly be- MAX A/C: come high enough to cause severe or possibly fatal injuries to people or When the temperature control/MAX A/C lever is moved to the left end, the air conditioner cooling will start automatically and the A/C Heater, air conditioner and audio systems 4-3

੬ 00.1.17/A33-D/V5.0 ੭ indicator and air recirculation lights will turn on. HEATER OPERATION 4. Move the temperature control lever to the desired position. Air recirculation button Heating Defrosting or defogging OFF position: This mode is used to direct hot air from the This mode is used to defrost/defog the win- Outside air is drawn into the passenger com- floor outlets. Some air will also come from the dows. partment. defrost vents. 1. Push the button in. Use the off position for normal heater, or air 1. Push the air recirculation button to the OFF conditioner operation. position for normal heating. 2. Turn on the fan control dial. ON position (Indicator light ON): 2. Push the button in. 3. Move the temperature control lever to the desired position between the middle and Interior air is recirculated inside the vehicle. 3. Turn on the fan control dial. the HOT position. Push the air recirculation button to the ON 4. Move the temperature control lever to the ¼ To quickly remove ice or fog from the position when driving on a dusty road or to desired position between the middle and windows, turn on the fan control dial to 4 avoid traffic fumes and for maximum cooling the HOT position. and the temperature control lever to the full when using the air conditioner. For quick heating, move the air recirculation HOT position. Air conditioning button button to the ON position. Be sure to return the ¼ When the button is pushed, the air Start the engine, move the fan control dial to air recirculation button to the OFF position for conditioner will automatically be turned on the desired (1 to 4) position and push the air normal heating. to defog the windshield, and the air recircu- late mode will automatically be turned off. conditioning button to turn on the air condi- Ventilation tioner. The indicator light will come on when Outside air is drawn into the passenger the air conditioner is on. To stop the air con- This mode directs outside air from the side and compartment to improve the defogging per- ditioner, push the switch again to return it to center vents. formance. the original position. 1. Push the air recirculation button to the OFF The air conditioner cooling function oper- position. ates only when the engine is running. 2. Push the button in. 3. Turn on the fan control dial.

4-4 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ Bi-level heating recirculate mode will automatically be recirculation button to the OFF position for turned off. normal cooling. This mode directs outside air from the side and center vents and hot air from the floor outlets. Outside air is drawn into the passenger Dehumidified heating compartment to improve the defogging per- 1. Push the air recirculation button to the OFF formance. This mode is used to heat and dehumidify. position. AIR CONDITIONER OPERATION 1. Push the air recirculation button to the OFF 2. Push the button in. position. 3. Turn on the fan control dial. Start the engine, move the fan control dial to the desired (1 to 4) position and push in the air 2. Push the button in. 4. Normally move the temperature control le- conditioning button to activate the air condi- 3. Turn on the fan control dial. ver to the midpoint between HOT and tioner. When the air conditioner is on, cooling COLD. and dehumidifying functions will be added to 4. Push on the air conditioning button. The indicator light will come on. Heating and defogging the heater operation. Cooling 5. Move the temperature control lever to the This mode heats the interior and defogs the desired position. windshield. This mode is used to cool and dehumidify. Dehumidified defogging 1. Push the button in. 1. Push the air recirculation button to the OFF 2. Turn on the fan control dial. position. This mode is used to defog the windows and dehumidify. 3. Move the temperature control lever to the 2. Push the button in. 1. Push the button in. desired position between the middle and 3. Turn on the fan control dial. the HOT position. 2. Turn on the fan control dial. 4. Push on the air conditioning button. The Operating tips indicator light will come on. 3. Push on the air conditioning button. The indicator light will come on. ¼ Clear snow and ice from the wiper 5. Move the temperature control lever to the blades and air inlet in front of the wind- desired position. 4. Move the temperature control lever to the shield. This will improve heater opera- desired position. For quick cooling when the outside tempera- tion. ture is high, move the air recirculation button to When the button is pushed, the air con- ¼ When the button is pushed, the air the ON position. Be sure to return the air ditioner will automatically be turned on to de- Heater, air conditioner and audio systems 4-5

੬ 00.1.17/A33-D/V5.0 ੭ fog the windshield, and the air recirculate quick heating, cooling or defrosting. mode will automatically be turned off. The air recirculation button should be in Outside air is drawn into the passenger com- the OFF position for normal cooling, heat- partment to improve the defogging perfor- ing and defrosting. mance. Operating tips ¼ Keep the windows and sun roof closed while the air conditioner is in operation. ¼ After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This will allow the air conditioner to cool the interior more quickly. ¼ The air conditioning system should be operated for about 10 minutes at least once a month. This helps prevent dam- age to the system due to lack of lubrica- tion. ¼ If the coolant temperature gauge exceeds the HOT position, turn the air conditioning off. For additional information, see “If your vehicle overheats” in the “6. In case of emergency” section. AIR FLOW CHARTS The charts on the following pages show the button and lever positions for maximum and 4-6 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ SAA0469 SAA0470 Heater, air conditioner and audio systems 4-7

੬ 00.1.17/A33-D/V5.0 ੭ SAA0471 SAA0472 4-8 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ HEATER AND AIR CONDITIONER (Automatic) (if so equipped)

On hot, sunny days, temperatures in a closed vehicle could quickly be- come high enough to cause severe or possibly fatal injuries to people or animals. ¼ Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up. ¼ Positioning of the heating or air con- ditioning controls should not be done while driving, so full attention may be given to vehicle operation.

Start the engine and operate the controls to activate the air conditioner. AUTOMATIC OPERATION Cooling and/or dehumidified heating SAA0463 (AUTO) WARNING ning. This mode may be normally used all year round as the system automatically works to ¼ Do not leave children, impaired keep a constant temperature. Air flow distribu- ¼ The air conditioner cooling function adults, or pets alone in your vehicle. tion and fan speed are also controlled auto- operates only when the engine is run- matically.

Heater, air conditioner and audio systems 4-9

੬ 00.1.17/A33-D/V5.0 ੭ 1. Push the AUTO button on. (AUTO will be Dehumidified defogging Push the AUTO button to return to automatic displayed.) control of the fan speed. 1. Push the DEF button on. (The indica- 2. Turn the temperature set dial to the left or tor light on the button will come on.) Air recirculation right to set the desired temperature. ¼ 2. Turn the temperature set dial to the left or Push the air recirculation button to recir- Adjust the temperature set dial to about right to set the desired temperature. culate interior air inside the vehicle. The indi- 75°F (24°C) for normal operation. cator light on the switch will come on. ¼ To quickly remove ice from the outside of ¼ The temperature of the passenger compart- the windows, push the manual fan control Push it again to make the air inlet controlled ment will be maintained automatically. Air flow distribution and fan speed are also button and set to the maximum posi- automatically (FRESH, REC/FRE and controlled automatically. tion . RECIRCULATION). The indicator will go out. ¼ Heating (ECON) As soon as possible after the windshield is The air recirculation button will not be acti- clean, push the AUTO button to return to vated when the air conditioner is in DEF mode. The air conditioner does not activate. When the auto mode. you need to heat only, use this mode. Air flow control ¼ When the DEF button is pushed, the 1. Push the ECON (Economy) button on. air conditioner will automatically be turned Pushing the manual air flow control button (ECON will be displayed.) on at outside temperatures above 23°F selects the air outlet to: 2. Turn the temperature set dial to the left or (−5°C) to defog the windshield, and the air : Air flows from center and side ventila- right to set the desired temperature. recirculate mode will automatically be tors. turned off. ¼ The temperature of the passenger compart- : Air flows from center and side ventila- ment will be maintained automatically. Air Outside air is drawn into the passenger tors and foot outlets. flow distribution and fan speed are also compartment to improve the defogging per- controlled automatically. formance. : Air flows mainly from foot outlets. ¼ Do not set the temperature lower than the MANUAL OPERATION : Air flow from defroster and foot out- outside air temperature. Otherwise the sys- lets. Fan speed control tem may not work properly. To turn system off ¼ Not recommended if windows fog up. Push the fan control button to manually control the fan speed. Push the OFF button. 4-10 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ SERVICING AIR CONDITIONER

AMBIENT TEMPERATURE The air conditioning system in your NISSAN SWITCH (AMB) vehicle is charged with a refrigerant designed with the environment in mind. This refrigerant Push the ambient temperature switch. The will not harm the earth’s ozone layer. How- outside ambient temperature will be displayed ever, special charging equipment and lubricant for approximately 5 seconds. are required when servicing your NISSAN air conditioner. Using improper refrigerants or lu- The ambient temperature sensor is located bricants will cause severe damage to your air in front of the radiator. The sensor may be conditioning system. See “Capacities and rec- affected by road or engine heat, wind direc- ommended fuel/lubricants” in the “10. Techni- tion and other driving conditions. The dis- cal and consumer information” section for air play may differ from the actual ambient conditioning system refrigerant and lubricant temperature or the temperature displayed recommendations. on various signs or billboards. Your NISSAN dealer will be able to service OPERATING TIPS HA1011 your environmentally friendly air conditioning When the engine coolant temperature and The sensor on the instrument panel helps system. outside air temperature are low, the air flow maintain a constant temperature; do not put from the foot outlets may not operate for a anything on or around this sensor. WARNING maximum of 150 seconds. However, this is not a malfunction. After the coolant temperature warms up, the air flow from the foot outlets will The air conditioner system contains re- operate normally. frigerant under high pressure. To avoid personal injury, any air conditioner ser- vice should be done only by an experi- enced technician with proper equip- ment.

Heater, air conditioner and audio systems 4-11

੬ 00.1.17/A33-D/V5.0 ੭ AUDIO SYSTEM

Turn the ignition key to ACC or ON and press change. Buildings, terrain, signal distance and the power on switch to turn on the radio. If you interference from other vehicles can work listen to the radio with the engine not running, against ideal reception. Described below are the key should be turned to the ACC position. some of the factors that can affect your radio reception. Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridges, mountains and other external influences. Intermittent changes in reception quality normally are caused by these external influences. Using a cellular phone in or near the ve- hicle may influence radio reception quality.

Radio reception SAA0306 Your radio system is equipped with state-of- the-art electronic circuits to enhance radio FM RADIO RECEPTION reception. These circuits are designed to ex- Range: FM range is normally limited to 25 to tend reception range, and to enhance the 30 miles (40 to 48 km), with monaural (single quality of that reception. channel) FM having slightly more range than However there are some general characteris- stereo FM. External influences may some- tics of both FM and AM radio signals that can times interfere with FM station reception even affect radio reception quality in a moving ve- if the FM station is within 25 miles (40 km). The hicle, even when the finest equipment is used. strength of the FM signal is directly related to These characteristics are completely normal in the distance between the transmitter and re- a given reception area, and do not indicate any ceiver. FM signals follow a line-of-sight path, malfunction in your radio system. exhibiting many of the same characteristics as Remember that a moving vehicle is not the light. For example they will reflect off objects. ideal place to listen to a radio. Because of the Fade and drift: As your vehicle moves away movement, reception conditions will constantly 4-12 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ from a station transmitter, the signals will tend power lines, electric signs and even traffic head, capstan and pinch roller may col- to fade and/or drift. lights. lect a tape coating residue as the tape is played. This residue accumulation can Static and flutter: During signal interference AUDIO OPERATION cause weak or wavering sound, and from buildings, large hills or due to antenna PRECAUTIONS should be removed periodically with a position, usually in conjunction with increased head cleaning tape. If the residue is not distance from the station transmitter, static or Cassette player removed periodically, the player may flutter can be heard. This can be reduced by need to be disassembled for cleaning. adjusting the treble control counterclockwise ¼ To maintain good quality sound, to reduce treble response. NISSAN recommends using cassette tapes of 60 minutes or shorter in length. Multipath reception: Because of the reflective characteristics of FM signals, direct and re- ¼ Cassette tapes should be removed from flected signals reach the receiver at the same the player when not in use. Store cas- time. The signals may cancel each other, settes in their protective cases and away resulting in momentary flutter or loss of sound. from direct sunlight, heat, dust, mois- AM RADIO RECEPTION ture and magnetic sources. ¼ Direct sunlight can cause the cassette to AM signals, because of their low frequency, become deformed. The use of deformed can bend around objects and skip along the cassettes may cause the cassette to jam ground. In addition, the signals can be in the player. bounced off the ionosphere and bent back to earth. Because of these characteristics. AM ¼ Do not use cassettes with labels which signals are also subject to interference as they are peeling and loose. If used, the label travel from transmitter to receiver. could jam in the player. Fading: Occurs while the vehicle is passing ¼ If a cassette has loose tape, insert a through freeway underpasses or in areas with pencil through one of the cassette hubs many tall buildings. It can also occur for sev- and rewind the tape firmly around the eral seconds during ionospheric turbulence hubs. Loose tape may cause tape jam- even in areas where no obstacles exist. ming and wavering sound quality. Static: Caused by thunderstorms, electrical ¼ Over a period of time, the playback Heater, air conditioner and audio systems 4-13

੬ 00.1.17/A33-D/V5.0 ੭ disc DIGITAL AUDIO” logo on the disc ¼ CDs that are warped, scratched, or or packaging. have abnormal edges ¼ During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD and dehumidify or ventilate the player com- pletely. ¼ The player may skip while driving on rough roads. ¼ The CD player sometimes cannot func- tion when the compartment temperature is extremely high. Decrease the tem- perature before use. ¼ Do not expose the CD to direct sunlight. ¼ CDs that are of poor quality, dirty, scratched, covered with fingerprints, or that have pin holes may not work prop- erly. ¼ Do not use the following CDs as they SAA0480 may cause the CD player to malfunction. ¼ 8 cm (3.1 in) discs with an adapter ¼ Recordable compact discs (CD-R) Compact Disc (CD) player ¼ Rewritable compact discs (CD-RW) ¼ Only use high quality 4.7 inches (12 cm) ¼ round discs that have the “COMPACT CDs that are not round ¼ CDs with a paper label 4-14 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ FM-AM RADIO WITH CASSETTE PLAYER Audio main operation Power/Volume control: Turn the ignition key to ACC or ON, then push the Power/Volume control knob. The mode (radio or cassette) which was playing immedi- ately before the system was turned off re- sumes playing. When no cassette is loaded, the radio comes on. Pushing the Power/ Volume control knob again turns the system off. Turn the Power/Volume control knob to adjust the volume.

SAA0263 Heater, air conditioner and audio systems 4-15

੬ 00.1.17/A33-D/V5.0 ੭ FM-AM radio operation FM-AM band select: Push the FM-AM band select button to listen to the radio and tune in the desired station. Pushing the FM-AM band select button will change the band FM1, FM2 or AM. The FM stereo indicator, ST illuminates during FM stereo reception. When the stereo broad- cast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE (Tuning): SAA0235 Adjusting tone quality and speaker display reappears. Once the sound quality is balance: set to the desired level, press the AUDIO WARNING ⋅ ⋅ ⋅ button repeatedly until the radio or cassette To adjust BASS TREB FADER BAL (Bass, tape display appears. The radio should not be tuned while Treble, Fader, Balance), press the AUDIO driving so full attention may be given to button until the desired mode (BAS, TRE, FAD Radio/Cassette tape priority mode vehicle operation. or BAL) appears in the display. In this mode, the radio station illuminates in the Press the or button to adjust BASS display during radio operation. During cassette Push either manual tuning button or and TREB to the desired level. Use the tape operation, TAPE illuminates in the dis- . or button to adjust FADER or BAL play. modes. FADER adjusts the sound level be- SEEK/SCAN tuning: tween the front and rear speakers and BAL Push the SEEK/SCAN tuning button or adjusts the sound level between the right and for less than 1.5 seconds. SEEK tuning left speakers. begins from high to low or low to high frequen- After 10 seconds, the radio or cassette tape cies and stops at the next broadcasting sta- 4-16 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ tion. Pushing the button again continues the Station memory operations: SEEK function. Once the highest broadcasting Six stations can be set for the AM band. 12 station is reached, the radio continues in the stations can be set for the FM band (six for SEEK mode at the lowest broadcast station. FM1, six for FM2). Push the SEEK/SCAN tuning button or for more than 1.5 seconds. SCAN illu- 1. Push the FM-AM band select button to minates in the display window. SCAN tuning select AM, FM1, or FM2. The selected band begins from high to low or low to high frequen- illuminates in the display. cies and stops at each broadcasting station for 2. Tune to the desired station. 5 seconds. Pushing the button again during this 5 second period stops SCAN tuning and 3. Push the desired select button for more the radio remains tuned to that station. than 1.5 seconds. For example, in the illustrations ch2 is to be memorized. The radio mutes when the select button is pushed. 4. When the sound resumes, memorizing is complete. 5. Other station select buttons can be set in the same manner. If the battery cable is disconnected, or if the radio fuse opens, the radio memory is can- celled. In that case, reset the desired stations. Cassette tape player operation Turn the ignition key to ACC or ON, then carefully insert a cassette tape into the tape door. The cassette tape automatically pulls into the SAA0264 player. The word TAPE and moving digital Heater, air conditioner and audio systems 4-17

੬ 00.1.17/A33-D/V5.0 ੭ squares illuminate on the right side of the or REW button again, or the PLAY/STOP are trademarks of Dolby Laboratories display window. button. Licensing Corporation. Metal or chrome tape usage: CAUTION APS (automatic program search) FF, APS REW: The cassette player is automatically set to high performance play when playing a metal or Do not force the cassette tape into the Push either the APS FF or APS REW button chrome cassette tape. tape door. This could cause player dam- while the cassette tape is playing. The tape runs quickly, stops, then plays the next selec- age. Ejecting the cassette tape: tion. Either the FF or REW symbol flashes in the display while searching for the selection. Push the EJECT button. The cassette tape automatically comes out. The cassette tape automatically changes di- This system searches at the blank intervals rections to play the other side when the first between selections. If there is a blank interval side is complete. At this time, the moving within one selection or there is no interval digital squares illuminate on the left side of the between selections, the system may not stop display window. in the desired or expected location. PROG (program): PLAY/STOP: Push the PROG button. The moving digital Push the PLAY/STOP button while the cas- squares illuminate on either the right or left sette tape is playing to stop the tape. Push the side of the display window to indicate the side button again to play the tape. of program play. FF (fast forward), REW (rewind): Dolby NR (Noise Reduction): Push either the FF or REW button for the Push the Dolby NR button for Dolby NR desired direction. encoded tapes to reduce high frequency tape noise. The indicator light comes on. The FF or REW symbol illuminates in the Dolby NR is manufactured under license from display. Dolby Laboratories Licensing Corporation. To stop the FF or REW function, press the FF DOLBY NR and the double-D symbol 4-18 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ FM-AM RADIO WITH CASSETTE PLAYER AND COMPACT DISC (CD) PLAYER Audio main operation Head unit The radio has an FM diversity reception sys- tem, which employs two antennas. One is a rod type antenna; the other is an antenna printed on the window. This system automati- cally switches to the antenna which is receiv- ing less noise. The tape deck employs a permalloy head which allows for improved reproduction of high frequency ranges. Noise is also greatly re- duced by the combined use of the Dolby NR (Noise Reduction) system. The auto loudness circuit enhances the low frequency range au- tomatically in both radio reception and tape and CD playback. ON⋅OFF/Volume control: Turn the ignition key to ACC or ON, and then push the ON⋅OFF/VOL control knob while the system is off to call up the mode (radio, tape or CD) which was playing immediately before the system was turned off. When no CD or tape is loaded, the radio will come on. While the SAA0380 system is on, pushing the ON⋅OFF/VOL con- Heater, air conditioner and audio systems 4-19

੬ 00.1.17/A33-D/V5.0 ੭ When FM/AM band select button is pushed while the ignition switch is in the ACC or ON, the radio will come on at the station last played. The last station played will also come on when the power knob is turned to ON. If a compact disc or tape is playing when the FM/AM band select button is turned to ON, the compact disc or tape will automatically be turned off and the last radio station played will come on. The FM stereo indicator ST will glow during SAA0381 FM stereo reception. When the stereo broad- cast signal is weak, the radio will automatically trol knob turns the system off. button also to adjust Fader (FAD) or change from stereo to monaural reception. Balance (BAL) modes. FAD adjusts the sound To turn the radio off, press the ON⋅OFF/VOL level between the front and rear speakers and control knob. TUNE (Tuning): BAL adjusts the sound between the right and Turn the ON⋅OFF/VOL control knob to adjust left speakers. After 10 seconds, the radio or the volume. cassette tape display reappears. Once the sound quality is set to the desired level, press WARNING Adjusting tone quality and speaker the AUDIO button repeatedly until the radio or balance: cassette tape display appears. The radio should not be tuned while To adjust BASS, TRE (Treble), BAL (Balance) driving so full attention may be given to and FAD (Fader), press the AUDIO button until FM-AM radio operation vehicle operation. the desired mode BAS, TRE, FAD or BAL FM/AM band select: appears in the display. Press the or Use these buttons for manual tuning. To move button to adjust Bass (BAS) and Treble Pushing the FM/AM band select button will (TRE) to the desired level. Use the or change the band FM1, FM2 or AM. quickly through the channels, hold either of the 4-20 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ TUNE buttons down for more than 0.5 sec- Station memory operations: onds. Twelve stations can be set for the FM band SEEK/SCAN tuning: (six for FM1, six for FM2). SEEK tuning: Six stations can be set for the AM band. Push the SEEK/SCAN tuning button or 1. Tune to the desired station using the for less than 1.5 seconds. SEEK tuning SEEK/SCAN or TUNE button. begins from high to low or low to high frequen- 2. Push the desired station select button for cies and stops at the next broadcasting sta- more than 1.5 seconds. (For example, in tion. the diagram ch2 is to be memorized. The SCAN tuning: radio mutes when the select button is pushed.) Push the SEEK/SCAN tuning button or for more than 1.5 seconds. SCAN tuning 3. The indicator ch2 will then come on and the begins from high to low or low to high frequen- sound will resume. Memorizing is now com- cies and stops at each broadcasting station for plete. 10 seconds. Pushing the button again during 4. Other buttons can be set in the same this 10 seconds period will stop SCAN tuning manner. and the radio will remain tuned to that station. If the battery cable is disconnected, or if the If the SEEK/SCAN tuning button is not pushed fuse blows, the radio memory will be can- within 10 seconds, SCAN tuning moves to the celled. In that case, reset the desired stations. next station. Cassette tape player operation Turn the ignition key to ACC or ON, and then lightly insert the cassette tape into the tape door. The cassette tape will be automatically pulled into the player. The radio or CD will turn off (if it is on) and the SAA0382 cassette tape will begin to play. Heater, air conditioner and audio systems 4-21

੬ 00.1.17/A33-D/V5.0 ੭ tion, press the (fast forward) or (re- The cassette tape will automatically change CAUTION wind) again, or the TAPE button. directions to play the other side when the first side is completed. APS (Automatic Program Do not force the cassette tape into the Search) FF, APS REW: Dolby NR (Noise Reduction): tape door. This could cause player dam- When the (APS FF) button is pushed Push the Dolby NR button for Dolby NR age. while the tape is being played, the next pro- encoded tapes to reduce high frequency tape gram will start to play from the beginning. Push noise. The indicator will come on. If the system is turned off by pushing the the (APS FF) button several times to skip Dolby noise reduction manufactured under li- ON⋅OFF/VOL control knob with the cassette through programs. The tape will advance the cense from Dolby Laboratories Licensing Cor- tape still in the player, the tape will resume number of times the button is pushed (up to poration. Dolby NR and the double-D symbol playing when the system is turned back on. nine programs). are trademarks of Dolby Laboratories PLAY: When the (APS REW) button is pushed Licensing Corporation. once, the program being played starts over Metal or chrome tape usage: ¼ When the TAPE button is pushed with the from the beginning. Push the (APS system turned off and a tape loaded, the REW) button several times to skip back sev- The cassette player will be automatically set to system will come on and the tape will play. eral selections. The tape will go back the high performance play when playing a metal or number of times the button is pushed. Either chrome cassette tape. ¼ When the TAPE button is pushed with the FF or REW symbol flashes on the right either the radio or compact disc turned on TAPE EJECT: side of the display window while searching for and the tape loaded, the compact disc or the selection. the radio will automatically be turned off When this button is pushed with the tape and the tape will play. This system searches for the blank intervals loaded, the tape will be ejected. between selections. If there is a blank interval When the tape is ejected while it is being FF (Fast Forward), REW within one program or there is no interval played, the system will be turned off. (Rewind): between programs, the system may not stop in Push the (fast forward) button to fast the desired or expected location. Compact disc (CD) player operation forward the tape. To rewind the tape, push the PROG (Program): Turn the ignition key to the ACC or ON position (rewind) button. Either the FF or REW and insert the compact disc into the slot with symbol illuminates on the right side of the Push the PROG button to change the tape the label side facing up. The compact disc will display window. To stop the FF or REW func- side while the tape is being played. 4-22 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ be guided automatically into the slot and start playing, the tape or radio will automatically be PROG (Program): playing. turned off and the compact disc will start to play. When the PROG button is pushed while the After loading the disc, the number of tracks on compact disc is being played, the play pattern the disc and the play time will appear on the FF (Fast Forward), REW will change as follows: display. (Rewind): no mark: All the programs will be played If the radio or tape is already operating, it will When the (fast forward) or (rewind) repeatedly in sequence. automatically turn off and the compact disc will button is pushed while the compact disc is play. being played, the compact disc will play while 1: Only one program (the one being played fast forwarding or rewinding. When the button when the PROG button is pushed) will be CAUTION is released, the compact disc will return to repeated. normal play speed. RANDOM: Programs will be played at random, Do not force the compact disc into the APS (Automatic Program not following the sequence on the compact slot. This could damage the player. Search) FF, APS REW: disc. The same program may be repeated When the (APS FF) button is pushed twice. while the compact disc is being played, the If the system has been turned off while the When the compact disc is ejected, the program next to the present one will start to compact disc was playing, pushing the play pattern will automatically change to play from its beginning. Push several times to ON⋅OFF/VOL control knob will start the com- skip through programs. The compact disc will no mark. pact disc. advance the number of times the button is CD EJECT: 8 cm diameter compact discs can also be used pushed. (When the last program on the com- without an adapter. pact disc is skipped through, the first program When the CD EJECT button is pushed with the will be played.) When the (APS REW) compact disc loaded, the compact disc will be PLAY: button is pushed, the program being played ejected. When the CD/CHG button is pushed with the returns to its beginning. Push several times to When this button is pushed while the compact system off and the compact disc loaded, the skip back through programs. The compact disc disc is being played, the compact disc will will go back the number of times the button is system will turn on and the compact disc will come out and the system will turn off. start to play. pushed. If the compact disc comes out and is not When the CD/CHG button is pushed with the removed, it will be pulled back into the slot compact disc loaded but the tape or the radio Heater, air conditioner and audio systems 4-23

੬ 00.1.17/A33-D/V5.0 ੭ to protect it. (without 8 cm diameter com- pact discs) CD IN indicator: CD IN indicator appears on the display when the CD is loaded with the system on.

SAA0451 SAA0464 CD CARE AND CLEANING STEERING SWITCH FOR AUDIO ¼ Handle a CD by its edges. Never touch the CONTROL (if so equipped) surface of the disc. Do not bend the disc. The audio system can be operated using the ¼ Always place the discs in the storage case controls on the steering wheel. when they are not being used. MODE select switch ¼ To clean a disc, wipe the surface from the center to the outer edge using a clean, soft Push the mode select switch to change the cloth. Do not wipe the disc using a circular mode in the sequence of AM, FM1, FM2, CD motion. and CD autochanger (if so equipped) and Do not use a conventional record cleaner or Tape. alcohol intended for industrial use. Volume control switches ¼ A new disc may be rough on its inner and outer edges. Remove the rough edges us- Push the upper or lower side switch to in- ing the side of a pen or pencil as illustrated. crease or decrease the volume. 4-24 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ CAR PHONE OR CB RADIO

Tuning or button for more than 1.5 sec- If equipped with a genuine NISSAN cellular onds again. phone, your NISSAN features a non- Memory change (radio): ANTENNA directional microphone in the steering column Push the tuning switch or for less cover, so it is not necessary to look at or speak than 1.5 seconds to change the radio fre- Window antenna directly into the microphone when calling. To quency. do so could detract from the driving operation The antenna pattern is printed inside the rear and cause an accident. See the car phone Seek tuning (radio): window. manual for operation. Push the tuning switch or for more than 1.5 seconds to seek the next or previous CAUTION Some models are pre-wired to accept the radio station. genuine NISSAN cellular phone. In addition, the same model has the phone antenna built ¼ APS (Automatic Program Search) FF, APS Do not place metalized film near the into the rear glass window. REW (tape/CD or CD changer): rear window glass or attach any metal When installing a CB, ham radio or car phone Push the tuning switch or for less parts to it. This may cause poor re- ception or noise. in your NISSAN, be sure to observe the follow- 1.5 seconds to return to the beginning of the ing cautions, otherwise the new equipment present program or skip to the next program. ¼ When cleaning the inside of the rear may adversely affect the Engine control sys- Push several times to skip back or skip window, be careful not to scratch or tem and other electronic parts. through programs. damage the rear window antenna. This system searches for the blank intervals Lightly wipe along the antenna with a WARNING between selections. If there is a blank interval dampened soft cloth. within one program or there is no interval between programs, the system may not stop in ¼ A cellular telephone should not be the desired or expected location. used while driving so full attention FF REW (tape or CD changer): may be given to vehicle operation. Some jurisdictions prohibit the use of Push the tuning switch or for more cellular telephones while driving. than 1.5 seconds to rewind or fast forward the tape or to change the playing disc up or down. To stop the FF or REW function, press the Heater, air conditioner and audio systems 4-25

੬ 00.1.17/A33-D/V5.0 ੭ ¼ If you must make a call while your ¼ Connect the ground wire from the CB vehicle is in motion, the hands free radio chassis to the body. cellular phone operational mode (if ¼ For details, consult an authorized so equipped) is highly recommended. NISSAN dealer. Exercise extreme caution at all times so full attention may be given to ve- hicle operation. ¼ If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so.

CAUTION

¼ Keep the antenna as far as possible away from the Engine Control Module (ECM). ¼ Keep the antenna wire more than 8 in (20 cm) away from the Multiport Fuel Injection harness. Do not route the antenna wire next to any harness. ¼ Adjust the antenna standing-wave ra- tio as recommended by the manufac- turer.

4-26 Heater, air conditioner and audio systems

੬ 00.1.17/A33-D/V5.0 ੭ 5 Starting and driving

Precautions when starting and driving...... 5-2 Cruise control operations ...... 5-14 Exhaust gas (Carbon monoxide)...... 5-2 Break-in schedule ...... 5-15 Three way catalyst ...... 5-3 Increasing fuel economy ...... 5-16 Avoiding collision and rollover...... 5-3 Parking/parking on hills...... 5-17 Drinking alcohol/drugs and driving...... 5-4 Power steering ...... 5-18 Ignition switch...... 5-4 Brake system ...... 5-18 Automatic transmission ...... 5-4 Braking precautions...... 5-18 Manual transmission ...... 5-5 Anti-lock brake system (ABS) ...... 5-19 Key positions ...... 5-6 Traction control system (if so equipped)...... 5-20 Nissan Vehicle Immobilizer System ...... 5-6 Cold weather driving ...... 5-21 Before starting the engine...... 5-7 Freeing a frozen door lock ...... 5-21 Starting the engine...... 5-7 Anti-freeze ...... 5-21 Driving the vehicle...... 5-8 Battery ...... 5-21 Automatic transmission ...... 5-8 Draining of coolant water ...... 5-21 Manual transmission ...... 5-11 Tire equipment ...... 5-21 Parking brake ...... 5-13 Special winter equipment ...... 5-21 Cruise control ...... 5-13 Driving on snow or ice ...... 5-22 Precautions on cruise control...... 5-14 Engine block heater (if so equipped) ...... 5-22

੬ 00.1.17/A33-D/V5.0 ੭ PRECAUTIONS WHEN STARTING AND DRIVING WARNING tain colorless and odorless carbon mon- nections must pass to a trailer oxide. Carbon monoxide is dangerous. It through the seal on the trunk lid or ¼ Do not leave children, impaired can cause unconsciousness or death. the body, follow the manufacturer’s recommendation to prevent carbon adults, or pets alone in your vehicle. ¼ If you suspect that exhaust fumes are monoxide entry into the vehicle. They could accidentally injure them- entering the vehicle, drive with all selves or others through inadvertent windows fully open, and have the ¼ If a special body or other equipment operation of the vehicle. Also, on hot, vehicle inspected immediately. is added for recreational or other us- sunny days, temperatures in a closed age, follow the manufacturer’s rec- ¼ Do not run the engine in closed vehicle could quickly become high ommendation to prevent carbon spaces such as a garage. enough to cause severe or possibly monoxide entry into the vehicle. fatal injuries to people or animals. ¼ Do not park the vehicle with the en- (Some recreational vehicle appli- gine running for any extended length ¼ Closely supervise children when they ances such as stoves, refrigerator, of time. are around cars to prevent them from heaters, etc. may also generate car- bon monoxide.) playing and becoming locked in the ¼ Keep the trunk lid closed while driv- trunk where they could be seriously ing, otherwise exhaust gases could ¼ The exhaust system and body should injured. Keep the car locked with the be drawn into the passenger com- be inspected by a qualified mechanic trunk closed when not in use, and partment. If you must drive with the whenever: prevent children’s access to car keys. trunk lid open, follow these precau- a. The vehicle is raised for service. tions: b. You suspect that exhaust fumes 1. Open all the windows. EXHAUST GAS (Carbon monoxide) are entering into the passenger 2. Set the air recirculation switch compartment. OFF and the fan control at 4 (high) WARNING c. You notice a change in the sound to circulate the air. of the exhaust system. Do not breathe exhaust gases; they con- ¼ If electrical wiring or other cable con-

5-2 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ AVOIDING COLLISION AND d. You have had an accident involv- CAUTION ROLLOVER ing damage to the exhaust system, underbody, or rear of the vehicle. ¼ Do not use leaded gasoline. Deposits from leaded gasoline seriously re- WARNING THREE WAY CATALYST duce the three way catalyst’s ability to help reduce exhaust pollutants. Failure to operate this vehicle in a safe The three way catalyst is an emission control ¼ Keep your engine tuned up. Malfunc- and prudent manner may result in loss device installed in the exhaust system. Ex- tions in the ignition, fuel injection, or of control or an accident. haust gases in the converter are burned at electrical systems can cause over- high temperatures to help reduce pollutants. rich fuel flow into the three way cata- Be alert and drive defensively at all times. lyst, causing it to overheat. Do not Obey all traffic regulations. Avoid excessive WARNING keep driving if the engine misfires, or speed, high speed cornering, or sudden steer- if noticeable loss of performance or ing maneuvers, because these driving prac- ¼ The exhaust gas and the exhaust sys- other unusual operating conditions tices could cause you to lose control of your tem are very hot. Keep people, ani- are detected. Have the vehicle in- vehicle. As with any vehicle, a loss of con- mals or flammable materials away spected promptly by an authorized trol could result in a collision with other from the exhaust system compo- NISSAN dealer. vehicles or objects, or cause the vehicle to nents. rollover, particularly if the loss of control ¼ Avoid driving with an extremely low causes the vehicle to slide sideways. Be ¼ Do not stop or park the vehicle over fuel level. Running out of fuel could attentive at all times, and avoid driving when cause the engine to misfire, damag- flammable materials such as dry tired. Never drive when under the influence of grass, waste paper or rags. They may ing the three way catalyst. alcohol or drugs (including prescription or ignite and cause a fire. ¼ Do not race the engine while warming over-the-counter drugs which may cause it up. drowsiness). Always wear your seat belt. See “Seat Belts” in the “1. Seats, restraints and ¼ Do not push or tow your vehicle to supplemental air bag systems” section. And start the engine. also instruct your passengers to do so.

Starting and driving 5-3

੬ 00.1.17/A33-D/V5.0 ੭ IGNITION SWITCH

DRINKING ALCOHOL/DRUGS AND your ability to operate your vehicle is impaired DRIVING by alcohol, drugs, or some other physical condition. WARNING

Never drive under the influence of alco- hol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgment. Driving after drinking alcohol increases the likeli- hood of being involved in an accident injuring yourself and others. Addition- ally, if you are injured in the accident, SSD0083 alcohol can increase the severity of the injury. AUTOMATIC TRANSMISSION On automatic transmission models, the igni- NISSAN is committed to safe driving. But, you tion lock is designed so that the key cannot be must choose not to drive under the influence of turned to LOCK and removed until the selector alcohol. Every year thousands of people are lever is moved to the P (Park) position. injured or killed in alcohol related accidents. When removing the key from the ignition, Although the local laws vary on what is con- make sure the selector lever is in the P (Park) sidered to be legally intoxicated, the fact is that position. alcohol affects all people differently and most people underestimate the effects of alcohol. If the selector lever is not returned to P (Park) position, the key cannot be moved toward Remember, drinking and driving don’t mix! LOCK. And that’s true for drugs too (over the counter, When the key cannot be turned toward the prescription, and illegal drugs). Don’t drive if 5-4 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ LOCK position, proceed as follows to remove the key: WARNING 1. Move the selector lever into the P (Park) position. Never remove or turn the key to the LOCK position while driving. The steer- 2. Turn the ignition key slightly in the ON ing wheel will lock. This may cause the direction. driver to lose control of the vehicle and 3. Turn the key toward the LOCK position. could result in serious vehicle damage 4. Remove the key. or personal injury. If the key is removed from the ignition switch, the selector lever cannot be moved from P (Park) position. The selector lever can be moved if the ignition switch is in the ON SSD0082C position and the foot brake pedal is de- pressed. MANUAL TRANSMISSION There is an OFF position in between LOCK The switch includes an anti-theft steering lock and ACC, although it does not show on the device. lock cylinder. When the ignition is in OFF the LOCK Normal parking position (0) steering wheel is not locked. The ignition key can only be removed when In order for the steering wheel to be locked, it the switch is in this position. must be turned about 1/6 of a turn counter- On manual transmission models, to turn the clockwise from the straight up position. ignition key to LOCK from ACC or ON, first turn To lock the steering wheel, turn the key to the key to OFF and turn the key to LOCK while the LOCK position. Remove the key. To pushing the key in. unlock the steering wheel, insert the key In order for the steering wheel to be locked, it and turn it gently while rotating the steer- must be turned about 1/6 of a turn clockwise ing wheel slightly right and left. from the straight up position. Starting and driving 5-5

੬ 00.1.17/A33-D/V5.0 ੭ To lock the steering wheel, turn the key to KEY POSITIONS the registered Nissan Vehicle Immobilizer Sys- the LOCK position. Remove the key. To tem key. unlock the steering wheel, insert the key The switch includes an anti-theft steering lock If the engine fails to start using the registered and turn it gently while rotating the steer- device. Nissan Vehicle Immobilizer System key, it may ing wheel slightly right and left. LOCK (Normal parking position) (0) be due to interference caused by another Nissan Vehicle Immobilizer System key, an The ignition key can only be removed when WARNING automated toll road device or automated pay- the switch is in this position. ment device on the key ring. Restart the en- Never remove or turn the key to the OFF (1) gine using the following procedures: LOCK position while driving. The steer- The engine can be turned off without locking 1. Leave the ignition switch in the ON position ing wheel will lock. This may cause the the steering wheel. for approximately 5 seconds. driver to lose control of the vehicle and ACC (Accessories) (2) 2. Turn the ignition switch to the OFF or LOCK could result in serious vehicle damage position and wait approximately 10 sec- or personal injury. This position activates electrical accessories onds. such as the radio when the engine is not running. 3. Repeat step 1 and 2 again. 4. Restart the engine while holding the device ON (Normal operating position) (3) (which may have caused the interference) This position turns on the ignition system and separate from the registered Nissan Ve- the electrical accessories. hicle Immobilizer System key. START (4) If this procedure allows the engine to start, NISSAN recommends placing the registered This position activates the starter motor, start- Nissan Vehicle Immobilizer System key on a ing the engine. separate key ring to avoid interference from NISSAN VEHICLE IMMOBILIZER other devices. SYSTEM The Nissan Vehicle Immobilizer System will not allow the engine to start without the use of 5-6 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ BEFORE STARTING THE ENGINE STARTING THE ENGINE

¼ Make sure the area around the vehicle is 1. Apply the parking brake. ¼ In the summer, when restarting the clear. engine within 30 minutes after it has 2. Automatic transmission: been stopped, keep the accelerator ¼ Maintenance items listed here should be pedal fully depressed while starting. checked periodically, e.g., each time you Move the selector lever to P (Park) or N check engine oil. (Neutral). (P preferred.) CAUTION ¼ Check that all windows and lights are clean. The selector lever cannot be moved out of P (Park) position and into any of the other ¼ Visually inspect tires for their appearance gear positions if the key is removed from Do not operate the starter for more than and condition. Also check tires for proper the switch. 15 seconds at a time. If the engine does inflation. not start, turn the key off and wait 10 The starter is designed not to operate if the ¼ Lock all doors. seconds before cranking again, other- selector lever is in one of the driving posi- ¼ Position seat and adjust head restraints. tions. wise the starter could be damaged. ¼ Adjust inside and outside mirrors. Manual transmission: 4. Warm-up ¼ Fasten seat belts and ask all passengers to Move the shift lever to N (Neutral) position, do likewise. and depress the clutch pedal to the floor Allow the engine to idle for at least 30 seconds after starting. Drive at moderate ¼ while cranking the engine. Check the operation of warning lights when speed for a short distance first, especially in key is turned to the ON (3) position. The starter is designed not to operate un- cold weather. less the clutch pedal is fully depressed. 3. Crank the engine with your foot off the accelerator pedal by turning the ignition key to START. Release the key when the engine starts. If the engine starts, but fails to run, repeat the above procedure. ¼ If the engine is very hard to start in extremely cold or hot weather, de- press the accelerator pedal and hold it to help start the engine. Starting and driving 5-7

੬ 00.1.17/A33-D/V5.0 ੭ DRIVING THE VEHICLE

AUTOMATIC TRANSMISSION shift into a driving gear. CAUTION The automatic transmission in your vehicle is 2. Release the parking brake and foot brake, electronically controlled by a transmission con- then gradually start the vehicle in motion. trol module to produce maximum power and When stopping the vehicle on an uphill smooth operation. WARNING grade, do not hold the vehicle by de- pressing the accelerator pedal. The foot Shown on the following pages are the recom- brakes should be used for this purpose. mended operating procedures for this trans- ¼ Do not depress the accelerator pedal mission. Follow these procedures for maxi- while shifting from P or N to R, D, 2 or mum vehicle performance and driving 1. Always depress the brake pedal enjoyment. until shifting is completed. Failure to Starting the vehicle do so could cause you to lose control and have an accident. After starting the engine, fully depress the foot ¼ brake pedal and push the selector lever button Cold engine idle speed is high, so use before shifting the selector lever to the R, N, D, caution when shifting into a forward 2 or 1 position. Be sure the vehicle is fully or reverse gear before the engine has stopped before attempting to shift the selector warmed up. lever. ¼ On slippery roads, do not downshift. This automatic transmission is designed This may cause a loss of control. so that the foot brake pedal must be de- pressed before shifting from P (Park) posi- ¼ Never shift to P or R while vehicle is tion to any drive position while the ignition moving. This could cause an acci- switch is ON. dent. The selector lever cannot be moved out of P (Park) position and into any of the other gear positions if the key is removed from the switch. 1. Keep the foot brake pedal depressed and 5-8 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ the parking brake first, then shift the lever into Do not exceed 37 MPH (60 km/h) in the 1 (Low the P (Park) position. gear) position. R (Reverse): Use this position to back up. Always be sure the vehicle is completely stopped. With the brake pedal depressed, push in the select lever button and move the lever to the R (Reverse) position N (Neutral): Neither forward nor reverse gear is engaged. The engine can be started in this position. You may shift to N (Neutral) position and restart a SD1003M stalled engine while the vehicle is moving. Shifting D (Drive): Push the button to shift into P, R or from D to Use this position for all normal forward driving. 2. All other positions can be selected without pushing the button. 2 (Second gear): P (Park): Use for hill climbing or engine braking on downhill grades. Use this selector position when the vehicle is Do not exceed 69 MPH (110 km/h) in the 2 parked or when starting the engine. Always be (Second gear) position. sure the vehicle is at a complete stop. For maximum safety, depress the brake pedal, 1 (Low gear): then push in the select lever button and move Use this position when climbing steep hills the lever to the P (Park) position. Apply the slowly or driving slowly through deep snow, parking brake. When parking on a hill, apply sand or mud, or for maximum engine braking on steep downhill grades. Starting and driving 5-9

੬ 00.1.17/A33-D/V5.0 ੭ To move the select lever, push the shift lock release button and select lever button. The select lever can be moved to N (Neutral). To push the shift lock release button using a screwdriver or other tool, follow the procedure as illustrated. If the lever cannot be moved out of P (Park) have your NISSAN dealer check the automatic transmission system as soon as possible.

WARNING

If the selector lever cannot be moved SSD0110 from the P position while the engine is running and the brake pedal is de- Overdrive switch pressed, the stop lights may not work. Each time your vehicle is started, the transmis- Malfunctioning stop lights could cause sion is automatically reset to overdrive ON. an accident injuring yourself and others. ON: For normal driving the overdrive switch is engaged. The transmission is up- Accelerator downshift shifted into overdrive as the vehicle SSD0151 — In D position — speed increases. Shift lock release For rapid passing or hill climbing, fully depress The overdrive does not engage until the the accelerator pedal to the floor. This shifts engine has warmed up. If the battery charge is low, the select lever the transmission down into second gear or first OFF: Changed for driving up and down long may not move from the P position even with gear, depending on the vehicle speed. the brake pedal depressed and the select lever slopes where engine braking would be button pushed. advantageous, push the overdrive switch. The O/D OFF light illuminates. 5-10 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ When cruising at a low speed or climb- OFF and wait for 3 seconds. Then turn the ing a gentle slope, you may feel uncom- key back to the ON position. The vehicle fortable shift shocks as the transmission should return to its normal operating con- shifts between third and overdrive re- dition. If it does not return to its normal peatedly. In this case, press the over- operating condition, have your NISSAN drive switch. The O/D OFF indicator light dealer check the transmission and repair if comes on at this time. necessary. When driving conditions change, press the overdrive switch again. The O/D OFF indicator light goes out. Remember not to drive at high speeds for extended periods of time with the O/D OFF light illuminated. This reduces the fuel SSD0002 economy. Fail-safe MANUAL TRANSMISSION When the fail-safe operation occurs, the next Shifting time the key is turned to the ON position, the To change gears, or when up shifting or down O/D OFF light will blink for approximately 8 shifting depress the clutch pedal fully, shift into seconds after coming on for 2 seconds. While the appropriate gear then release the clutch the vehicle can be driven under these circum- slowly and smoothly. stances please note that the automatic trans- mission will be locked in third gear. On the five-speed transmission model, you cannot shift directly from fifth gear into the R If the vehicle is driven under extreme con- (Reverse) position. First shift into the N (Neu- ditions, such as excessive wheel spinning tral) position, then into the R (Reverse) posi- and subsequent hard braking, the fail-safe tion. system may be activated. This will occur even if all electrical circuits are functioning If it is difficult to move the shift lever into R properly. In this case, turn the ignition key (Reverse) or 1 (Low gear), shift into N (Neu- Starting and driving 5-11

੬ 00.1.17/A33-D/V5.0 ੭ tral), then release the clutch pedal and shift Suggested up-shift speeds Suggested maximum speed in each into R (Reverse) or 1 (Low gear) again. Shown below are suggested vehicle speeds gear for shifting into a higher gear. These sugges- Downshift to a lower gear if the engine is not WARNING tions relate to fuel economy and vehicle per- running smoothly, or if you need to accelerate. formance. Actual up-shift speeds will vary ac- ¼ Do not downshift abruptly on slippery cording to road conditions, the weather and Do not exceed the maximum suggested speed roads. This may cause a loss of con- individual driving habits. (shown below) in any gear. For level road driving, use the highest gear suggested for trol. For normal acceleration in low altitude areas that speed. Always observe posted speed ¼ Do not over-rev the engine when [less than 4,000 ft (1,219 m)]: limits, and drive according to the road condi- shifting to a lower gear. This may ACCEL shift CRUISE shift tions, which will ensure safe operation. Do not cause a loss of control or engine Gear change point point over-rev the engine when shifting to a lower damage. MPH (km/h) MPH (km/h) gear as it may cause engine damage or loss of 1st to 2nd 13 (21) 13 (21) vehicle control. 2nd to 3rd 23 (37) 16 (26) Gear MPH (km/h) CAUTION 3rd to 4th 33 (53) 27 (43) 1st 30 (48) 4th to 5th 39 (63) 36 (58) 2nd 55 (88) ¼ Do not rest your foot on the clutch 3rd 80 (128) For quick acceleration when the engine is cold pedal while driving. This may cause or in high altitude areas [over 4,000 ft (1,219 4th — clutch damage. m)]: 5th — ¼ Stop your vehicle completely before Gear change MPH (km/h) shifting into R (Reverse). 1st to 2nd 15 (24) ¼ When the vehicle is stopped for a 2nd to 3rd 25 (40) period of time, for example at a stop 3rd to 4th 40 (64) light, shift to N (Neutral) and release 4th to 5th 45 (72) the clutch pedal with the foot brake applied.

5-12 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ PARKING BRAKE CRUISE CONTROL

4. Before driving, be sure the brake warning light goes out. WARNING

WARNING Do not use the cruise control when driv- ing under the following conditions: ¼ Be sure the parking brake is fully ¼ it is not possible to keep the vehicle released before driving. Failure to do at a set speed. so can cause brake failure and lead to ¼ an accident. in heavy traffic or in traffic that varies in speed. ¼ Do not release the parking brake from ¼ on winding or hilly roads. outside the vehicle. ¼ on slippery roads (rain, snow, ice, ¼ Do not use the gear shift in place of etc.). SSD0018 the parking brake. When parking, be ¼ in very windy areas. To apply: pull the lever up. sure the parking brake is fully en- gaged. Doing so could cause a loss of vehicle To release: control and result in an accident. ¼ Do not leave children unattended in a 1. Firmly apply foot brake. vehicle. They could release the park- 2. Automatic transmission models: ing brake and cause an accident. CAUTION Move the selector lever to the P (Park) position. On manual transmission models, do not Manual transmission models: shift into N (Neutral) without depressing Place the shift lever in the N (Neutral) the clutch pedal when the cruise control position. is set. Should this occur, depress the clutch pedal and turn the main switch off 3. While pulling up on the lever slightly, push immediately. Failure to do so may cause the button and lower completely.

Starting and driving 5-13

੬ 00.1.17/A33-D/V5.0 ੭ ¼ To pass another vehicle, depress the engine damage. accelerator pedal. When you release the pedal, the vehicle will return to the previ- PRECAUTIONS ON CRUISE ously set speed. CONTROL ¼ The vehicle may not maintain the set speed when going up or down steep hills. If this ¼ If the cruise control system malfunctions, it happens, drive without the cruise control. cancels automatically. The SET indicator light on the meter panel then blinks to warn To cancel the preset speed, follow either of the driver. these three methods: ¼ If the SET indicator light blinks, turn the a) Push the cancel switch; The SET indicator cruise control main switch off and have the light will go out. system checked by your NISSAN dealer. b) Tap the brake pedal; The SET indicator SSD0193 ¼ The SET indicator light may blink when the light will go out. cruise control main switch is turned on CRUISE CONTROL OPERATIONS c) Turn the main switch off. Both the CRUISE while pushing the RES/ACCEL, COAST/ indicator and SET indicator lights will go SET, or CANCEL switch (located on the The cruise control allows driving at a speed out. steering wheel). To properly set the cruise between 25 to 89 MPH (40 to 144 km/h) control system, perform the preceding without keeping your foot on the accelerator ¼ If you depress the brake pedal while push- steps in the order indicated. pedal. ing the RES/ACCEL set switch and reset at the cruising speed, turn the main switch off To turn on the cruise control, push the main once and then turn it on again. switch on. The CRUISE indicator light on the meter panel will come on. ¼ The cruise control will automatically be can- celled if the vehicle slows down below To set at cruising speed, accelerate your approximately 8 MPH (13 km/h). vehicle to the desired speed, push the COAST/SET switch and release it. (The SET ¼ Depress the clutch pedal (manual transmis- indicator light will come on.) Take your foot off sion), or move the selector lever to N (Neu- the accelerator pedal. Your vehicle will main- tral) position (automatic transmission). The tain the set speed. SET indicator light will go out. 5-14 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ BREAK-IN SCHEDULE

To reset at a faster cruising speed, use one the vehicle speed is over 25 MPH (40 km/h). During the first 1,000 miles (1,600 km), follow of the following three methods: these recommendations for the future reliabil- ity and economy of your new vehicle. a) Depress the accelerator pedal. When the vehicle attains the desired speed, push and ¼ Avoid driving for long periods at constant release the COAST/SET switch. speed, either fast or slow. ¼ b) Push and hold the RES/ACCEL set switch. Do not accelerate at full throttle in any gear. When the vehicle attains the speed you ¼ Avoid quick starts. desire, release the switch. ¼ Avoid hard braking as much as possible. c) Push, then quickly release the RES/ACCEL set switch. Each time you do this, the set ¼ Do not tow a trailer for the first 500 miles speed will increase by about 1 MPH (1.6 (800 km). km/h). To reset at a slower cruising speed, use one of the following three methods: a) Lightly tap the brake pedal. When the ve- hicle attains the desired speed, push the COAST/SET switch and release it. b) Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. c) Push, then quickly release the COAST/ SET switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). To resume the preset speed, push and re- lease the RES/ACCEL set switch. The vehicle will resume the last set cruising speed when Starting and driving 5-15

੬ 00.1.17/A33-D/V5.0 ੭ INCREASING FUEL ECONOMY

¼ Keep your engine tuned up. ¼ Follow the recommended periodic mainte- nance schedule. ¼ Keep the tires inflated at the correct pres- sure. Low pressure will increase tire wear and waste fuel. ¼ Keep the front wheels in correct alignment. Improper alignment will cause not only tire wear but also lower fuel economy. ¼ Air conditioner operation lowers fuel economy. Use the air conditioner only when necessary. SD1001M ¼ When cruising at highway speeds, it is ¼ Accelerate slowly and smoothly. Maintain more economical to use the air conditioner cruising speeds with a constant accelerator and leave the windows closed to reduce position. drag. ¼ Drive at moderate speeds on the highway. Driving at high speed will lower fuel economy. ¼ Avoid unnecessary stopping and braking. Maintain a safe distance behind other ve- hicles. ¼ Use a proper gear range which suits road conditions. On level roads, shift into high gear as soon as possible. ¼ Avoid unnecessary engine idling. 5-16 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ PARKING/PARKING ON HILLS

WARNING

¼ Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for automatic transmission models or in an appropriate gear for manual trans- mission models. Failure to do so could cause the vehicle to move un- expectedly or roll away and result in an accident.

MSD0002 ¼ Make sure the automatic transmis- sion selector lever has been pushed 1. Firmly apply the parking brake. as far forward as it can go and cannot WARNING 2. Automatic transmission models: be moved without depressing the button at the end of the lever. Move the selector lever to the P (Park) ¼ Do not stop or park the vehicle over position. flammable materials such as dry grass, waste paper or rags. They may Manual transmission models: 3. To help prevent the vehicle from rolling into the street when parked on a sloping drive ignite and cause a fire. Place the shift lever in the R (Reverse) way, it is a good practice to turn the wheels ¼ Never leave the engine running while position. When parking on an uphill grade, as illustrated. place the shift lever in the 1 (Low gear) the vehicle is unattended. ¼ position. HEADED DOWNHILL WITH CURB: k1 ¼ Never leave children unattended in Turn the wheels into the curb and move the the vehicle. vehicle forward until the curb side wheel gently touches the curb.

Starting and driving 5-17

੬ 00.1.17/A33-D/V5.0 ੭ POWER STEERING BRAKE SYSTEM

¼ HEADED UPHILL WITH CURB: k2 The power assisted steering is designed to BRAKING PRECAUTIONS use a hydraulic pump, driven by the engine, to Turn the wheels away from the curb and assist steering. The brake system has two separate hydraulic move the vehicle back until the curb side circuits. If one circuit malfunctions, you will still wheel gently touches the curb. If the engine stops or drive belt breaks, you will have braking at two wheels. still have control of the vehicle. However, ¼ HEADED UPHILL OR DOWNHILL, NO much greater steering effort is needed, espe- Vacuum assisted brake CURB: k3 cially in sharp turns or at low speeds. The brake booster aids braking by using en- Turn the wheels toward the side of the road gine vacuum. If the engine stops, you can stop so the vehicle will move away from the WARNING center of the road if it moves. the vehicle by depressing the brake pedal. However, greater foot pressure on the brake 4. Turn the ignition key to the LOCK position If the engine is not running or is turned pedal will be required to stop the vehicle and and remove the key. off while driving, the power assist for the the stopping distance will be longer. steering will not work. Steering will be Wet brakes much harder to operate. When the vehicle is washed or driven through water, the brakes may get wet. As a result, your braking distance will be longer and the vehicle may pull to one side during braking. To dry brakes, drive the vehicle at a safe speed while lightly pressing the brake pedal to heat-up the brakes. Do this until the brakes return to normal. Avoid driving the vehicle at high speeds until the brakes function correctly. Using the brakes Avoid resting your foot on the brake pedal while driving. This overheats the brakes, in- creases wear on the brake linings and pads, and reduces gas mileage. 5-18 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ To help save the brakes and to prevent the system helps the driver maintain steering con- conditions are hazardous and extra care is brakes from overheating, reduce speed and trol and helps to minimize swerving and spin- required while driving. downshift to a lower gear before going down a ning on slippery surfaces. slope or long grade. Overheated brakes may Self-test feature Using the system reduce braking performance and could result The anti-lock brake system consists of elec- in loss of vehicle control. Depress the brake pedal and hold it down. tronic sensors, electric pumps, and hydraulic solenoids controlled by a computer. The com- WARNING WARNING puter has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or ¼ While driving on a slippery surface, Do not pump the brake pedal. Doing so reverse. When the self-test occurs, you may be careful when braking, accelerating may result in increased stopping dis- hear a clunk noise and/or feel a pulsation in or downshifting. Abrupt braking or tances. the brake pedal. This is normal and is not an accelerating could cause the wheels indication of any malfunction. If the computer to skid and result in an accident. Normal operation senses any malfunction, it switches the anti- ¼ If the engine is not running or is lock brake system OFF and turns on the ABS turned off while driving, the power The anti-lock brake system will not operate at warning light in the dashboard. The brake system will then behave normally, but without assist for the brakes will not work. speeds below 3 to 6 MPH (5 to 10 km/h) to anti-lock assistance. Braking will be harder. completely stop the vehicle. (The speeds will vary according to road conditions.) When the If the light comes on during the self check, or anti-lock system senses that one or more while you are driving, you should take your ANTI-LOCK BRAKE SYSTEM (ABS) wheels are close to locking up, the actuator vehicle to your NISSAN dealer for repair at (under the hood) rapidly applies and releases your earliest convenience. The anti-lock brake system controls the brakes hydraulic pressure (like pumping the brakes at each wheel so the wheels will not lock when very quickly). While the actuator is working, WARNING braking abruptly or when braking on slippery you may feel a pulsation in the brake pedal surfaces. The system detects the rotation and hear a noise or vibration from the actuator speed at each wheel and varies the brake fluid under the hood. This is normal and indicates The anti-lock brake system is a sophis- pressure to prevent each wheel from locking that the anti-lock system is working properly. ticated device, but it cannot prevent ac- and sliding. By preventing wheel lockup, the However, the pulsation may indicate that road Starting and driving 5-19

੬ 00.1.17/A33-D/V5.0 ੭ TRACTION CONTROL SYSTEM (if so equipped) On slippery surfaces such as wet asphalt cidents resulting from careless or dan- roads, vehicle wheels may spin when the on, this could cause the three way gerous driving techniques. It can help vehicle is accelerated. This wheel spin re- catalyst to overheat and be damaged. maintain vehicle control during braking duces acceleration, or causes the vehicle to To avoid this, the TCS will automati- on slippery surfaces, but remember that swerve, thus decreasing vehicle stability. cally turn off. Shifting the gear selec- the stopping distance on slippery sur- tor to D will reactivate the TCS. The traction control system helps limit wheel faces will be longer than on normal spin on slippery roads. The system operates surfaces, even with the anti-lock sys- only if it senses one or both of the front wheels tem. Stopping distances may also be spinning or beginning to lose traction. When WARNING longer on rough, gravel or snow covered this happens, the system reduces engine roads, or if you are using tire chains. power and may also upshift the transmission This system is designed to prevent the Always maintain a safe distance from to help limit wheel spin. wheels from spinning. However, it does the vehicle in front of you. Ultimately, ¼ Indicator light not prevent vehicle slipping or spinning the responsibility for safety of self and If a malfunction occurs in the traction con- due to abrupt steering operation at high others rests in the hands of the driver. trol system, the SLIP and indicator speeds or by careless or dangerous Tire type and condition of tires may also lights come on in the meter panel. driving techniques. Be especially care- affect braking effectiveness. As long as these warning lights are on, the ful when driving on slippery surfaces traction control function is canceled. The and always drive safely. ¼ When replacing tires, install the vehicle will behaves like a model without specified size of tires on all four the traction control system. wheels. ¼ When installing a spare tire, make CAUTION sure it is the proper size and type as specified on the tire placard. See “Ve- ¼ The traction control system is most hicle identification” in the “10. Tech- effective when the transmission gear nical and consumer information” sec- selector is in the D position. tion for tire placard location. ¼ If you drive in gear 1 or 2 with the TCS

5-20 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ COLD WEATHER DRIVING

FREEING A FROZEN DOOR LOCK the “8. Do-it-yourself” section for changing installing tire chains. When installing tire engine coolant. chains, make sure they are of proper size To prevent a door lock from freezing, apply for the tires on your vehicle and are in- de-icer or glycerin to it through the key hole. If TIRE EQUIPMENT stalled according to the chain manufactur- the lock becomes frozen, heat the key before 1. SUMMER tires are of a tread design to er’s suggestions. Use only SAE Class S inserting it into the key hole. provide superior performance on dry pave- chains. Other types may damage your ANTI-FREEZE ment. However, the performance of these vehicle. Use chain tensioners when recom- tires will be substantially reduced in snowy mended by the tire chain manufacturer to In the winter when it is anticipated that the and icy conditions. If you operate your ensure a tight fit. Loose end links of the tire temperature will drop below 32°F (0°C), check vehicle on snowy or icy roads, NISSAN chain must be secured or removed to pre- anti-freeze (ethylene glycol base) to assure recommends the use of MUD & SNOW or vent the possibility of whipping action dam- proper winter protection. For additional infor- ALL SEASON tires on all four wheels. age to the fenders or underbody. If pos- mation, see “Engine Cooling System” in the “8. Please consult your NISSAN dealer for the sible, avoid fully loading your vehicle when Do-it-yourself” section. tire type, size, speed rating and availability using tire chains. In addition, drive at a information. reduced speed. Otherwise, your vehicle BATTERY may be damaged and/or vehicle handling 2. For additional traction on icy roads, studded If the battery is not fully charged during ex- and performance may be adversely af- tires may be used. However, some prov- fected. tremely cold weather conditions, the battery inces and states prohibit their use. Check fluid may freeze and damage the battery. To local, state and provincial laws before in- Never install tire chains on a T-type spare maintain maximum efficiency, the battery stalling studded tires. tire. Do not use tire chains on dry roads. should be checked regularly. For additional information, see “Battery” in the “8. Do-it- Skid and traction capabilities of studded SPECIAL WINTER EQUIPMENT snow tires, on wet or dry surfaces, may be yourself” section. It is recommended that the following items be poorer than that of non-studded snow tires. DRAINING OF COOLANT WATER carried in the vehicle during winter: 3. Tire chains may be used if desired. Make ¼ a scraper and stiff-bristled brush to remove If the vehicle is to be left outside without sure they are of proper size for the tires on ice and snow from the windows and wiper anti-freeze, drain the cooling system by open- your vehicle and are installed according to blades. ing the drain valves located under the radiator the chain manufacturer’s suggestions. Use and on the engine block. Refill before operat- of tire chains may be prohibited according ¼ a sturdy, flat board to be placed under the ing the vehicle. See “Engine cooling system” in to location. Check the local laws before jack to give it firm support. Starting and driving 5-21

੬ 00.1.17/A33-D/V5.0 ੭ ¼ a shovel to dig the vehicle out of snow- drifts. ¼ Watch for slippery spots (glare ice). pronged (cheater) adapters. You can be These may appear on an otherwise injured by an electrical shock if you use ¼ extra window washer fluid to refill the res- clear road in shaded areas. If a patch an ungrounded connection. ervoir tank. of ice is seen ahead, brake before DRIVING ON SNOW OR ICE reaching it. Try not to brake while actually on the ice, and avoid any WARNING sudden steering maneuvers. ¼ Do not use cruise control on slippery ¼ Wet ice (32°F, 0°C and freezing rain), roads. very cold snow or ice can be slick and ¼ very hard to drive on. The vehicle will Snow can trap dangerous exhaust have a lot less traction or grip under gases under your vehicle. Keep snow these conditions. Try to avoid driving clear of the exhaust pipe and from on wet ice until the road is salted or around your vehicle. sanded. ¼ Whatever the condition, drive with ENGINE BLOCK HEATER (if so caution. Accelerate and slow down equipped) with care. If accelerating or down- An engine block heater to assist extreme cold shifting too fast, the drive wheels will temperature starting is available through your lose even more traction. NISSAN dealer. ¼ Allow more stopping distance under these conditions. Braking should be WARNING started sooner than on dry pavement. ¼ Allow greater following distances on Do not use your heater with an un- slippery roads. grounded electrical system or two-

5-22 Starting and driving

੬ 00.1.17/A33-D/V5.0 ੭ 6 In case of emergency

Flat tire ...... 6-2 If your vehicle overheats...... 6-10 Changing a flat tire...... 6-2 Towing your vehicle ...... 6-11 Jump starting...... 6-7 Towing recommended by NISSAN ...... 6-11 Push starting ...... 6-9 Vehicle recovery (Freeing a stuck vehicle)...... 6-12

੬ 00.1.17/A33-D/V5.0 ੭ FLAT TIRE

CHANGING A FLAT TIRE verse), or the automatic transmission If you have a flat tire, follow the instructions into P (Park). below. ¼ Never change tires when the vehicle Stopping the vehicle is on a slope, ice or slippery areas. 1. Safely move the vehicle off the road away This is hazardous. from traffic. ¼ Never change tires if oncoming traffic 2. Turn on the hazard warning flashers. is close to your vehicle. Wait for pro- fessional road assistance. 3. Park on a level surface and apply the parking brake. Shift the manual transmis- sion into R (Reverse) position (automatic transmission in P (Park) position). MCE0001 4. Turn off the engine. Blocking wheels 5. Raise the hood to warn other traffic, and to signal professional road assistance person- Place suitable blocks at both the front and nel that you need assistance. back of the wheel diagonally opposite the flat tire to prevent the vehicle from rolling when it is 6. Have all passengers get out of the vehicle jacked up. and stand in a safe place, away from traffic and clear of the vehicle. WARNING WARNING Be sure to block the wheel as the vehicle may move and could cause personal ¼ Make sure that the parking brake is injury. securely applied and the manual transmission is shifted into R (Re-

6-2 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ SCE0289 Removing wheel cover

CAUTION

Do not use your hands to pry off wheel caps. Doing so could result in personal SCE0299 SCE0288 injury. Getting the spare tire and tools Remove jacking tools and spare tire from the storage area located inside the trunk as illus- trated.

In case of emergency 6-3

੬ 00.1.17/A33-D/V5.0 ੭ SCE0286 CE1089 Jacking up vehicle and removing the damaged tire Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Place the jack directly under the jack-up point as illustrated above so that top of the jack contacts the vehicle at the jack up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown.

6-4 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Use the correct jack up points; never use any other part of the vehicle for jack support. ¼ Never jack up the vehicle more than necessary. ¼ Never use blocks on or under the jack. ¼ Do not start or run engine while ve- hicle is on the jack, as it may cause the vehicle to move. This is especially true for vehicles with limited slid dif- CE1092 ferential carriers. The jack should be used on level firm ¼ Do not allow passengers to stay in ground. WARNING the vehicle while it is on the jack. 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut ¼ Never get under the vehicle while it is wrench. Do not remove the wheel nuts supported only by the jack. until the tire is off the ground. ¼ Use only the jack provided with your 3. Carefully raise the vehicle until the tire vehicle to lift the vehicle. Do not use clears the ground. To lift the vehicle, se- the jack provided with your vehicle curely hold the jack lever and rod with both hands as shown above. Remove the wheel on other vehicles. nuts, and then remove the tire. The jack is designed only for lifting your vehicle during a tire change.

In case of emergency 6-5

੬ 00.1.17/A33-D/V5.0 ੭ WARNING WARNING

¼ Incorrect wheel nuts or improperly Retighten the wheel nuts when the ve- tightened wheel nuts can cause the hicle has been driven for 600 miles wheel to become loose or come off. (1,000 km) (also in cases of a flat tire, This could cause an accident. etc.). ¼ Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose.

As soon as possible tighten the wheel nuts SCE0039 to the specified torque with a torque Installing the spare tire wrench. Wheel nut tightening torque: 1. Clean any mud or dirt from the surface between the wheel and hub. 80 ft-lb (108 N⋅m) 2. Carefully put the wheel on and tighten the Adjust tire pressure to the COLD pressure. wheel nuts finger tight. COLD pressure: 3. With the wheel nut wrench, tighten wheel After vehicle has been parked for three nuts alternately and evenly until they are hours or more or driven less than 1 mile tight. (1.6 km). 4. Lower the vehicle slowly until the tire COLD tire pressures are shown on the tire touches the ground. Then, with the wheel placard affixed to the center console lid. nut wrench, tighten the wheel nuts securely in the sequence as illustrated.

6-6 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ JUMP STARTING

To start your engine with a booster battery, the spare tire are designed for emer- instructions and precautions below must be gency use. See “Tires and wheels” in followed. the “8. Do-it-yourself” section. WARNING

¼ If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ¼ Explosive hydrogen gas is always present in the vicinity of the battery. SCE0040 Keep all sparks and flames away from the battery. Stowing the damaged tire and tools ¼ Do not allow battery fluid to come Securely store the spare tire and jacking into contact with eyes, skin, cloth or equipment in the vehicle. painted surfaces. Battery fluid is a corrosive sulphuric acid solution WARNING which can cause severe burns. If the fluid should come into contact with ¼ Always make sure that the spare tire anything, immediately flush the con- and jacking equipment are properly tacted area with water. secured after use. Such items can ¼ become dangerous projectiles in an Keep battery out of the reach of accident or sudden stop. children. ¼ The T-type spare tire and small size

In case of emergency 6-7

੬ 00.1.17/A33-D/V5.0 ੭ ¼ The booster battery must be rated at 12 volts. Use of an improperly rated battery can damage your vehicle. ¼ Whenever working on or near a bat- tery, always wear suitable eye protec- tors (for example, goggles or indus- trial safety spectacles) and remove rings, metal bands, or any other jew- elry. Do not lean over the battery when jump starting. ¼ Do not attempt to jump start a frozen battery. It could explode and cause SCE0154A serious injury. the N (Neutral) position (On automatic ¼ Your vehicle has an automatic engine WARNING transmission models, move the selector cooling fan. It could come on at any lever to the P (Park) position). Switch off all unnecessary electrical systems (light, time. Keep hands and other objects Always follow the instructions below. heater, air conditioner, etc.). away from it. Failure to do so could result in damage to the charging system and cause per- 3. Remove vent caps on the battery (if so sonal injury. equipped). Cover the battery with an old cloth to reduce explosion hazard. 4. Connect jumper cables in the sequence as 1. If the booster battery is in another vehicle, illustrated. position the two vehicles to bring their bat- teries into close proximity to each other. Do not allow the two vehicles to touch. 2. Apply parking brake. Move the shift lever to 6-8 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ PUSH STARTING

7. After starting your engine, carefully discon- CAUTION nect the negative cable and then the posi- CAUTION tive cable. ¼ Always connect positive (+) to posi- 8. Replace the vent caps (if so equipped). Be ¼ Automatic transmission models can- tive (+) and negative (−) to body sure to dispose of the cloth used to cover not be push started. This may cause ground (for example, strut mounting the vent holes as it may be contaminated transmission damage. bolt, etc. — not to the battery). with corrosive acid. ¼ Three way catalyst equipped models ¼ Make sure that cables do not touch should not be started by pushing moving parts in the engine compart- since the three way catalyst may be ment and that clamps do not contact damaged. any other metal. ¼ Never try to start the vehicle by tow- ing it; when the engine starts, the 5. Start the engine of the other vehicle and let forward surge could cause the ve- it run for a few minutes. hicle to collide with the tow vehicle. 6. Keep the engine speed of the other vehicle at about 2,000 rpm, and start your engine in the normal manner.

CAUTION

Do not keep starter motor engaged for more than 10 seconds. If the engine does not start right away, turn the key off and wait 3 to 4 seconds before trying again.

In case of emergency 6-9

੬ 00.1.17/A33-D/V5.0 ੭ IF YOUR VEHICLE OVERHEATS

tioner temperature control to maximum hot WARNING and fan control to high speed. contact with, or to get caught in the cooling fan, or drive belt. 3. Get out of the vehicle. Look and listen for ¼ Do not continue to drive if your ve- steam or coolant escaping from the radiator ¼ The engine cooling fan can start at hicle overheats. Doing so could before opening the hood. Wait until no any time when the coolant tempera- cause a vehicle fire. steam or coolant can be seen before pro- ture is high. ceeding. ¼ To avoid the danger of being scalded, never remove the radiator cap while 4. Open the engine hood. 6. After the engine cools down, check the the engine is still hot. When the radia- coolant level in the reservoir tank with the tor cap is removed, pressurized hot WARNING engine running. Add coolant to the reservoir water will spurt out, possibly causing tank if necessary. Have your vehicle re- paired at the nearest NISSAN dealer. serious injury. If steam or water is coming from the ¼ Do not open the hood if steam is engine, stand clear to prevent getting coming out. burned.

If your vehicle is overheating (indicated by an 5. Visually check if the cooling fan is running. extremely high temperature gauge reading), or The radiator hoses and radiator should not if you feel a lack of engine power, detect leak water. abnormal noise, etc., take the following steps: If coolant is leaking or the cooling fan does 1. Move the vehicle safely off the road, apply not run, stop the engine. the parking brake and move the shift lever to the N (Neutral) position (automatic trans- WARNING mission to the P (Park) position). Do not stop the engine. ¼ Be careful not to allow your hands, 2. Turn off the air conditioner switch. Open all hair, jewelry or clothing to come into the windows, move the heater or air condi- 6-10 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ TOWING YOUR VEHICLE

When towing your vehicle, all State (Provincial in Canada) and local regulations for towing and powertrain are in working condi- must be followed. Incorrect towing equipment tion. If any unit is damaged, dollies could damage your vehicle. Towing instruc- must be used. tions are available from an authorized NISSAN ¼ Always attach safety chains before dealer. Local service operators are generally towing. familiar with the applicable laws and proce- dures for towing. To assure proper towing and to prevent accidental damage to your vehicle, NISSAN recommends having a service opera- tor tow your vehicle. It is advisable to have the service operator carefully read the following precautions.

WARNING

¼ Never ride in a vehicle that is being towed. ¼ Never get under your vehicle after it has been lifted by a tow truck.

SCE0202 CAUTION TOWING RECOMMENDED BY NISSAN ¼ When towing, make sure that the NISSAN recommends that your vehicle be transmission, axles, steering system towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. In case of emergency 6-11

੬ 00.1.17/A33-D/V5.0 ੭ ground or four wheels on the ground transmission models with the rear (forward or backward) as this may wheels on the ground (if you do not cause serious and expensive damage use towing dollies): Always release to the transmission. the parking brake. If it is necessary to tow the vehicle with the rear wheels raised, always use towing dollies under the front VEHICLE RECOVERY (Freeing a wheels. stuck vehicle) ¼ ¼ When towing automatic transmission Tow chains or cables must be attached only to the main structural members of the ve- models with the front wheels on tow- hicle. ing dollies, or when towing manual transmission models with the front ¼ Pulling devices should be routed so they do wheels on the ground: not touch any part of the suspension, steer- ing, brake or cooling systems. ¼ Turn the ignition key to the OFF ¼ Always pull the cable straight out from the position, and secure the steering front or rear of the vehicle. Never pull on the wheel in a straight ahead position vehicle at an angle. with a rope or similar device. ¼ Never secure the steering wheel Pulling devices such as ropes or canvas by turning the ignition key to the straps are not recommended for use in vehicle towing or recovery. SCE0199 LOCK position. This may damage the steering lock mechanism. ¼ Stand clear of an stuck vehicle. CAUTION ¼ Move the gearshift lever to the N (Neutral) position. ¼ Never tow automatic transmission ¼ When towing automatic or manual models with the front wheels on the

6-12 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ WARNING

Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be dam- aged.

In case of emergency 6-13

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

6-14 In case of emergency

੬ 00.1.17/A33-D/V5.0 ੭ 7 Appearance and care

Cleaning exterior ...... 7-2 Floor mats ...... 7-4 Washing...... 7-2 Seat belts ...... 7-5 Waxing...... 7-2 Corrosion protection...... 7-5 Removing spots...... 7-3 Most common factors contributing to vehicle Underbody ...... 7-3 corrosion...... 7-5 Glass ...... 7-3 Environmental factors influence the rate of Aluminum alloy wheels...... 7-4 corrosion...... 7-5 Chrome parts...... 7-4 To protect your vehicle from corrosion ...... 7-6 Cleaning interior ...... 7-4

੬ 00.1.17/A33-D/V5.0 ੭ CLEANING EXTERIOR

Whenever possible, store or park your vehicle inside a garage or in a covered area. ¼ Avoid using tight-napped or rough cloths, such as washing mitts. Care When it is necessary to park outside, park in a must be taken when removing shady area or protect the vehicle with a body caked-on dirt or other foreign sub- cover. stances so that the paint surface is Be careful not to scratch the paint surface not scratched or damaged. when putting on or removing the body cover. Rinse the vehicle again with plenty of clean WASHING water. Thoroughly rinse surface dirt off the vehicle Inside flanges, seams and folds on the doors, with a wet sponge and plenty of clean water. hatches and hood are particularly vulnerable MAI0001 Clean the vehicle thoroughly using a mild soap to the effects of road salt. Therefore, these such as Nissan Car Wash, or a general pur- areas must be regularly cleaned. Make sure In order to maintain the appearance of your pose dishwashing liquid mixed with clean, that the drain holes in the lower edge of the vehicle, it is important to take proper care of it. lukewarm (never hot) water. door are open. Spray water under the body In the following cases, please wash your ve- and in the wheel wells to loosen the dirt and hicle as soon as possible to protect the paint CAUTION wash away road salt. surface. Avoid leaving water spots on the paint surface by using a damp chamois to dry the vehicle. ¼ After a rainfall to prevent possible damage ¼ Do not use strong household soap, from acid rain strong chemical detergents, gasoline WAXING or solvents. ¼ After driving on coastal roads Regular waxing protects the paint surface and ¼ Do not wash the vehicle in direct ¼ When contaminants such as soot, bird helps retain new vehicle appearance. After sunlight or while the vehicle body is waxing, polishing is recommended to remove droppings, tree sap, metal particles or bugs hot, as the surface may become built-up residue and to avoid a weathered get on the paint surface water-spotted. appearance. ¼ When dust or mud builds up on the surface If you wish to wax your vehicle, only use a wax 7-2 Appearance and care

੬ 00.1.17/A33-D/V5.0 ੭ specified for use over clear coats, such as causing underbody and suspension corrosion. Nissan Liquid or Spray Wax. Your Nissan Before the winter period and again in the dealer can assist you in choosing the proper spring, the underseal must be checked and, if product. necessary, re-treated. ¼ Wax your vehicle only after a thorough washing. Follow the instructions supplied with the wax. ¼ Do not use a wax containing any abrasives, cutting compounds or cleaners that may damage the vehicle finish. ¼ If the surface does not polish easily, use a road tar remover and wax again. SAI0014A Machine compounding or aggressive pol- ishing on a base coat/clear coat paint finish GLASS may dull the finish or leave swirl marks. When cleaning the rear window, it may be REMOVING SPOTS easier to clean if the high-mounted stop light is removed first. Remove tar and oil spots, industrial dust, in- sects, and tree sap as quickly as possible from Be careful when removing the high-mounted the surface of the paint to avoid lasting dam- stop light to reduce the risk of damaging the age or staining. Special cleaning products are high-mounted stop light wires. available at your NISSAN dealer or any auto- motive accessory store. The high-mounted stop light must be properly reinstalled before driving your vehicle. UNDERBODY Use glass cleaner to remove smoke and dust In areas where road salt is used in winter, the film from the glass surfaces. It is normal for underbody must be cleaned regularly. This will glass to become coated with a film after the prevent dirt and salt from building up and vehicle is parked in the hot sun. Glass cleaner Appearance and care 7-3

੬ 00.1.17/A33-D/V5.0 ੭ CLEANING INTERIOR and a soft cloth will easily remove this film. Occasionally remove loose dust from the inte- FLOOR MATS rior trim, plastic parts and seats using a CAUTION vacuum cleaner or soft brush. Wipe the vinyl The use of Genuine Nissan floor mats can and leather surfaces with a clean, soft cloth extend the life of your vehicle carpet and make dampened in mild soap solution, then wipe it easier to clean the interior. No matter what When cleaning the inside of the window, clean with a dry soft cloth. Before using any mats are used, be sure they are fitted for do not use sharp-edged tools, abrasive fabric protector, read the manufacturer’s rec- your vehicle and are properly positioned in cleaners or chlorine based disinfectant ommendations. Some fabric protectors con- the footwell to prevent interference with cleaners. They could damage the elec- tain chemicals that may stain or bleach the pedal operation. Mats should be maintained with regular cleaning and replaced if they trical conductors, radio antenna ele- seat material. become excessively worn. ments or rear window defogger ele- Use a cloth dampened only with water, to ments. clean the meter and gauge lens.

ALUMINUM ALLOY WHEELS CAUTION

Wash regularly, especially during winter ¼ Never use gasoline, thinner, or any months in areas where road salt is used. Salt similar material. could discolor the wheel if not removed. ¼ CHROME PARTS The leather seats should be regularly coated with a leather wax like saddle Clean all chrome parts regularly with a non- soap. Never use car wax. abrasive chrome polish to maintain the finish. ¼ Never use fabric protectors unless recommended by the manufacturer. ¼ Do not use glass or plastic cleaner on meter or gauge lens covers. It may damage the lens cover.

7-4 Appearance and care

੬ 00.1.17/A33-D/V5.0 ੭ CORROSION PROTECTION

SEAT BELTS MOST COMMON FACTORS The seat belts can be cleaned by wiping them CONTRIBUTING TO VEHICLE with a sponge dampened in a mild soap solu- CORROSION: tion. Allow the belts to dry completely before ¼ using them. The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. WARNING ¼ Damage to paint and other protective coat- ings caused by gravel and stone chips or Do not allow wet belts to roll up in the minor traffic accidents. retractor. NEVER use bleach, dye, or chemical solvents since these may se- ENVIRONMENTAL FACTORS verely weaken the seat belt webbing. INFLUENCE THE RATE OF SAI0012 CORROSION: Floor mat positioning aid Moisture (Driver side only) Accumulation of sand, dirt and water on the This model includes a front floor mat bracket to vehicle body underside can accelerate corro- act as a floor mat positioning aid. NISSAN floor sion. Wet floor coverings will not dry com- mats have been specially designed for your pletely inside the vehicle, and should be re- vehicle model. The driver’s side floor mat has moved for drying to avoid floor panel a grommet hole incorporated in it. Simply corrosion. position the mat by placing the floor mat bracket through the floor mat grommet hole Relative humidity while centering the mat in the floorpan contour. Corrosion will be accelerated in areas of high Periodically check to make certain that the relative humidity, especially those areas where mats are properly positioned. the temperatures stay above freezing and where atmospheric pollution exists and road salt is used. Appearance and care 7-5

੬ 00.1.17/A33-D/V5.0 ੭ Temperature CAUTION A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. ¼ NEVER remove dirt, sand or other debris from the passenger compart- Air pollution ment by washing it out with a hose. Industrial pollution, the presence of salt in the Remove dirt with a vacuum cleaner or air in coastal areas, or heavy road salt use will broom. accelerate the corrosion process. Road salt ¼ Never allow water or other liquids to will also accelerate the disintegration of paint surfaces. come in contact with electronic com- ponents inside the vehicle as this TO PROTECT YOUR VEHICLE may damage them. FROM CORROSION: ¼ Wash and wax your vehicle often to keep Chemicals used for road surface de-icing are the vehicle clean. extremely corrosive. They accelerate corro- ¼ Always check for minor damage to the paint sion and deterioration of underbody compo- and repair it as soon as possible. nents such as the exhaust system, fuel and brake lines, brake cables, floor pan and fend- ¼ Keep drain holes at the bottom of the doors ers. open to avoid water accumulation. In winter, the underbody must be cleaned ¼ Check the underbody for accumulation of periodically. sand, dirt or salt. If present, wash with water as soon as possible. For additional protection against rust and cor- rosion, which may be required in some areas, consult your local NISSAN dealer.

7-6 Appearance and care

੬ 00.1.17/A33-D/V5.0 ੭ 8 Do-it-yourself

Maintenance precautions ...... 8-2 Cleaning ...... 8-17 Engine compartment check locations ...... 8-4 Replacement ...... 8-17 Engine cooling system ...... 8-5 Parking brake and brake pedal...... 8-18 Checking engine coolant level ...... 8-5 Checking parking brake ...... 8-18 Changing engine coolant ...... 8-6 Checking brake pedal ...... 8-18 Engine oil ...... 8-7 Brake booster ...... 8-19 Checking engine oil level ...... 8-7 Clutch pedal ...... 8-19 Changing engine oil ...... 8-8 Fuses...... 8-20 Changing engine oil filter ...... 8-9 Engine compartment ...... 8-20 Automatic transmission fluid ...... 8-10 Passenger compartment ...... 8-21 Temperature conditions for checking...... 8-10 Multi-remote controller battery replacement ...... 8-22 Power steering fluid ...... 8-11 Lights...... 8-23 Brake and clutch fluid ...... 8-12 Headlights...... 8-24 Window washer fluid ...... 8-12 Battery ...... 8-13 Exterior and interior lights ...... 8-25 Drive belts ...... 8-15 Tires and wheels...... 8-30 Spark plugs ...... 8-15 Tire pressure ...... 8-30 Replacing spark plugs...... 8-16 Types of tires...... 8-30 Air cleaner ...... 8-16 Tire chains...... 8-31 Windshield wiper blades ...... 8-17 Changing tires and wheels...... 8-32

੬ 00.1.17/A33-D/V5.0 ੭ MAINTENANCE PRECAUTIONS

When performing any inspection or mainte- nance work on your vehicle, always take care nect the negative battery cable before tery. working near the fan. to prevent serious accidental injury to yourself ¼ On gasoline engine models with the or damage to the vehicle. The following are ¼ If you must work with the engine Multiport Fuel Injection (MFI) System, general precautions which should be closely running, keep your hands, clothing, the fuel filter or fuel lines should be observed. hair and tools away from moving serviced by a NISSAN dealer because fans, belts and any other moving the fuel lines are under high pressure WARNING parts. even when the engine is off. ¼ It is advisable to secure or remove ¼ Park the vehicle on a level surface, any loose clothing and any jewelry, apply the parking brake securely and such as rings, watches, etc. before CAUTION block the wheels to prevent the ve- working on your vehicle. hicle from moving. For a manual ¼ Do not work under the hood while the transmission, move the shift lever to ¼ Always wear eye protection when- engine is hot. Turn off the engine and N (Neutral) position. For an automatic ever you work on your vehicle. transmission, move the selector lever wait until it cools down. ¼ If you must run the engine in an to P (Park) position. ¼ Never connect or disconnect either enclosed space such as a garage, be the battery or any transistorized com- ¼ Be sure the ignition key is OFF or sure there is proper ventilation for ponent connector while the ignition LOCK when performing any parts re- exhaust gases to escape. placement or repairs. key is on. ¼ Never get under the vehicle while it is ¼ Never leave the engine or the auto- ¼ Your vehicle is equipped with an au- supported only by a jack. If it is nec- matic transmission related compo- tomatic engine cooling fan. It may essary to work under the vehicle, nent harness connector discon- come on at any time without warning, support it with safety stands. even if the ignition key is in the OFF nected while the ignition key is on. ¼ Keep smoking materials, flame and position and the engine is not run- ¼ Avoid direct contact with used engine sparks away from fuel and the bat- ning. To avoid injury, always discon- oil and coolant. Improperly disposed

8-2 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ engine oil, engine coolant and/or other vehicle fluids can hurt the envi- ronment. Always conform to local regulations for disposal of vehicle fluid.

This “8. Do-it-yourself” section gives instruc- tions regarding only those items which are relatively easy for an owner to perform. A genuine NISSAN Service Manual is also available. See “Owner’s Manual/Service Manual order information” in the “10. Technical and consurner information” section. You should be aware that incomplete or im- proper servicing may result in operating diffi- culties or excessive emissions, and could af- fect your warranty coverage. If in doubt about any servicing, have it done by your NISSAN dealer.

Do-it-yourself 8-3

੬ 00.1.17/A33-D/V5.0 ੭ ENGINE COMPARTMENT CHECK LOCATIONS

SDI1183 8-4 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ ENGINE COOLING SYSTEM

The engine cooling system is filled at the factory with a high-quality, year-round, anti- WARNING freeze coolant solution. The anti-freeze solu- tion contains rust and corrosion inhibitors, ¼ Never remove the radiator cap when therefore additional cooling system additives are not necessary. the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator. Wait CAUTION until the engine and radiator cool down. When adding or replacing coolant, be sure to use only a genuine NISSAN anti- ¼ See “If your vehicle overheats” in the freeze coolant or equivalent with the “6. In case of emergency” section. proper mixture ratio of 50% anti-freeze ¼ The radiator is equipped with a pres- and 50% demineralized water/distilled sure cap. To prevent engine damage, SDI0960 water. The use of other types of coolant use only a genuine NISSAN radiator CHECKING ENGINE COOLANT solutions may damage your engine cap. cooling system. LEVEL Check the coolant level in the reservoir tank when the engine is cold. If the coolant level is Outside temperature Deminer- alized below MIN, add coolant up to the MAX level. If down to Anti- water/ the reservoir tank is empty, check the coolant freeze distilled level in the radiator when the engine is cold. °C °F water If there is insufficient coolant in the radiator, fill the radiator with coolant up to the filler opening −35 −30 50% 50% and also add it to the reservoir tank up to the MAX level. If the engine cooling system frequently requires coolant, have it checked by your NISSAN dealer. Do-it-yourself 8-5

੬ 00.1.17/A33-D/V5.0 ੭ ¼ Improper servicing can result in reduced 4. Close the radiator drain plug and the drain heater performance and engine overheat- plug on the engine block securely. ing. 5. See “Capacities and recommended fuel/lubricants” in the “10. Technical and WARNING consumer information” section for cooling system capacity. Fill the radiator slowly with ¼ To avoid the danger of being scalded, the proper mixture of coolant and water. Fill never change the coolant when the the reservoir tank up to the MAX level. Then engine is hot. install the radiator cap. ¼ Never remove the radiator cap when the engine is hot. Serious burns could be caused by high pressure fluid escaping from the radiator. ¼ Avoid direct skin contact with used coolant. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible. ¼ Keep coolant out of reach of children and pets.

SDI0114 1. Open the radiator cap and drain plug. ¼ Waste coolant must be disposed of CHANGING ENGINE COOLANT properly. ¼ Major cooling system repairs should be ¼ Check your local regulations. performed by your NISSAN dealer. The 2. Open the drain plug on the engine block. service procedures can be found in the appropriate NISSAN Service Manual. 3. Flush the cooling system by running fresh water through the radiator. 8-6 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ ENGINE OIL

SDI0973 SDI0115 6. Start the engine, and warm it up until the CHECKING ENGINE OIL LEVEL radiator fan operates. Then race the engine two or three times under no load. Watch the 1. Park the vehicle on a level surface and coolant temperature gauge for signs of apply parking brake. overheating. 2. Run the engine until it reaches operating 7. Stop the engine. After it completely cools temperature. down, refill the radiator up to the filler 3. Turn off the engine. Wait more than 10 opening. Fill the reservoir tank up to the minutes for the oil to drain back into the MAX level. oil pan. 8. Check the radiator drain plug and the drain 4. Remove the dipstick and wipe it clean. plug on the engine block for any sign of Reinsert it all the way. leakage.

Do-it-yourself 8-7

੬ 00.1.17/A33-D/V5.0 ੭ CAUTION

Oil level should be checked regularly. Operating with insufficient amount of oil can damage the engine, and such dam- age is not covered by warranty.

SDI0534 SDI0974 5. Remove the dipstick again and check the CHANGING ENGINE OIL oil level. It should be between the H and L marks. If the oil level is below the L mark, 1. Park the vehicle on a level surface and remove the oil filler cap and pour recom- apply the parking brake. mended oil through the opening. Do not 2. Run the engine until it reaches operating overfill. temperature. 6. Recheck oil level with dipstick. 3. Turn the engine off and wait more than 10 It is normal to add some oil between oil minutes. maintenance intervals or during the 4. Place a large drain pan under the drain break-in period, depending on the severity plug. of operating conditions. 5. Remove the oil filler cap.

8-8 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ 6. Remove the drain plug with a wrench and refill capacity. The drain and refill capacity completely drain the oil. depends on the oil temperature and drain time. Use these specifications for reference If oil filter is to be changed, remove and only. Always use the dipstick to determine replace it at this time. See later in “Engine when the proper amount of oil is in the oil” for changing engine oil filter. engine. 9. Start the engine. CAUTION Check for leakage around the drain plug. Correct as required. Be careful not to burn yourself, as the engine oil is hot. 10.Turn the engine off and wait more than 10 minutes. Check the oil level with the dip- stick. Add engine oil if necessary. ¼ Waste oil must be disposed of properly. 11.Dispose of waste oil in the proper manner. SDI0975 ¼ Check your local regulations. CHANGING ENGINE OIL FILTER 7. Clean and re-install the drain plug and new WARNING washer. Securely tighten the drain plug with 1. Park the vehicle on a level surface and a wrench. ¼ Prolonged and repeated contact with apply the parking brake. Drain plug tightening torque: used engine oil may cause skin can- 2. Turn the engine off. cer. 22 to 29 ft-lb 3. Loosen the oil filter with an oil filter wrench. (29 to 39 N⋅m) ¼ Try to avoid direct skin contact with (Depending on the engine model, a special used oil. If skin contact is made, wash cap type wrench may be required. See Do not use excessive force. thoroughly with soap or hand cleaner your NISSAN dealer if in doubt.) Remove 8. Refill engine with recommended oil and as soon as possible. the oil filter by turning it by hand. install the cap securely. ¼ Keep used engine oil out of reach of See “Capacities and recommended children. fuel/lubricants” in the “10. Technical and consumer information” section for drain and Do-it-yourself 8-9

੬ 00.1.17/A33-D/V5.0 ੭ AUTOMATIC TRANSMISSION FLUID TEMPERATURE CONDITIONS CAUTION FOR CHECKING ¼ The fluid level should be checked using the Be careful not to burn yourself, as the HOT range on the dipstick after the follow- engine oil may be hot. ing conditions have been met: a) the engine should be warmed up to 4. Wipe the engine oil filter mounting surface operating temperature. with a clean rag. b) the vehicle should be driven at least 5 Be sure to remove any old rubber gasket minutes. remaining on the mounting surface of the engine. c) the automatic transmission fluid should be warmed to between 122 and 176°F 5. Coat the rubber gasket on the new filter (50 and 80°C). with clean engine oil. SSD0161 ¼ The fluid can be checked at fluid tempera- 6. Screw in the oil filter until a slight resistance tures of 86 to 122°F (30 to 50°C) using the is felt, then tighten additionally more than WARNING COLD range on the dipstick after the en- 2/3 turn. gine is warmed up and before driving. How- Oil filter tightening torque: ¼ When engine is running, keep hands, ever, the fluid should be re-checked using jewelry and clothing away from any the HOT range. 10.85 to 15.19 ft-lb (14.7 to 20.6 N⋅m) moving parts such as cooling fan and 1. Park the vehicle on a level surface and set drive belt. the parking brake. 7. Start the engine and check for leakage around the oil filter. Correct as required. ¼ Automatic transmission fluid is poi- 2. Start the engine and then move the selector sonous and should be stored care- lever through each gear range. Move the 8. Turn the engine off and wait several min- fully in marked containers out of the selector lever to P (Park) position after you utes. Check the oil level. Add engine oil if have moved it through all ranges. necessary. reach of children.

8-10 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ POWER STEERING FLUID

CAUTION

¼ Do not overfill. ¼ Use only NISSAN Matic D (Continen- tal US and Alaska) or Canada Nissan automatic transmission fluid. DexronTM III/MerconTM or equivalent may also be used. Outside the conti- nental US and Alaska contact a NISSAN dealer for more information regarding suitable fluids, including TM SDI1232 recommended brand(s) of Dexron SDI1076 III/MerconTM automatic transmission 3. Check the fluid level with the engine idling. fluid. Check the fluid level in the reservoir tank. 4. Remove the dipstick and wipe it clean with The fluid level should be checked using the lint-free paper. HOT range at fluid temperatures of 122 to NOTE: 176°F (50 to 80°C) or using the COLD range at 5. Reinsert the dipstick into the charging pipe If the vehicle has been driven for a long fluid temperatures of 32 to 86°F (0 to 30°C). as far as it will go. time at high speeds, or in city traffic in hot 6. Remove the dipstick and note the reading. weather, or if it is being used to pull a CAUTION If the level is at the low side of either range, trailer, the accurate fluid level cannot be add fluid to the charging pipe. read. You should wait until the fluid has ¼ Do not overfill. cooled down (about 30 minutes). ¼ Use Genuine Nissan PSFII or equiva- lent.

Do-it-yourself 8-11

੬ 00.1.17/A33-D/V5.0 ੭ BRAKE AND CLUTCH FLUID WINDOW WASHER FLUID

tem and affect the vehicle’s stopping ability.

CAUTION

Do not spill the fluid on painted sur- faces. This will damage the paint. If fluid is spilled, wash with water.

SDI0119 SDI0961 Check the fluid level in the reservoir. If the fluid Type A: is below the MIN line or the brake warning light Add fluid when the low washer fluid warning comes on, add DOT 3 fluid up to the MAX line. light comes on. Add a washer solvent to the If fluid must be added frequently, the system water for better cleaning. In the winter season, should be thoroughly checked by your add a windshield washer anti-freeze. Follow NISSAN dealer. the manufacturer’s instructions for the mixture ratio. WARNING

Use only new fluid. Old, inferior, or con- taminated fluid may damage the brake and clutch systems. The use of im- proper fluids can damage the brake sys-

8-12 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ BATTERY

¼ Keep the battery surface clean and dry. Any WARNING corrosion should be washed off with a solution of baking soda and water. Anti-freeze is poisonous and should be ¼ Make certain the terminal connections are stored carefully in marked containers clean and securely tightened. out of the reach of children. ¼ If the vehicle is not to be used for 30 days or longer, disconnect the (—) negative battery terminal cable to prevent discharge. CAUTION WARNING Do not substitute engine anti-freeze coolant for window washer solution. ¼ Do not expose the battery to flames This may result in damage to the paint. SDI0962 or electrical sparks. Hydrogen gas Type B: generated by battery action is explo- sive. Do not allow battery fluid to To check the fluid level, use your finger to plug contact your skin, eyes, fabrics, or the center hole of the cap (as shown above), painted surfaces. After touching a then remove it from the tank. If there is no fluid in the tube, add fluid. Add a washer solvent to battery or battery cap, do not touch or the water for better cleaning. In the winter rub your eyes. Thoroughly wash your season, add a windshield washer anti-freeze. hands. If the acid contacts your eyes, Follow the manufacturer’s instructions for the skin or clothing, immediately flush mixture ratio. with water for at least 15 minutes and seek medical attention. ¼ Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the bat-

Do-it-yourself 8-13

੬ 00.1.17/A33-D/V5.0 ੭ If jump starting is necessary, see “Jump start- tery which can generate heat, reduce ing” the “6. In case of emergency” section. If battery life, and in some cases lead to the engine does not start by jump starting, the an explosion. battery may have to be replaced. Contact your NISSAN dealer. ¼ When working on or near a battery, always wear suitable eye protection and remove all jewelry. ¼ Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after han- dling. ¼ Keep the battery out of the reach of DI0137M children. Check the fluid level in each cell. It should be between the MAX and MIN lines. If it is necessary to add fluid, add only distilled water to bring the level to the indicator in each filler opening. Do not overfill. 1. Remove the cell plugs. 2. Add distilled water up to the MAX level. 3. Tighten cell plugs.

8-14 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ DRIVE BELTS SPARK PLUGS

tion and tension in accordance with the maintenance schedule in this manual. WARNING

Be sure the engine and ignition switch are off and that the parking brake is engaged securely.

CAUTION

Be sure to use the correct socket to remove the spark plugs. An incorrect SDI0141 socket can damage the spark plugs.

WARNING

Be sure the ignition key is in the OFF or LOCK position. The engine could rotate unexpectedly.

1. Visually inspect each belt for signs of un- usual wear, cuts, fraying, oil adhesion or looseness. If the belt is in poor condition or loose, have it replaced or adjusted by your NISSAN dealer. 2. Have the belts checked regularly for condi-

Do-it-yourself 8-15

੬ 00.1.17/A33-D/V5.0 ੭ AIR CLEANER

not only cleans the air, it stops flame if the engine backfires. If it is not there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed and be care- ful when working on the engine with the air cleaner removed. ¼ Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury.

SDI0145 SDI0963 REPLACING SPARK PLUGS The filter element should not be cleaned and reused. Replace it according to the mainte- Platinum-tipped spark plugs nance intervals. See “Periodic maintenance It is not necessary to replace the platinum- schedules” in the “9. Maintenance” section for tipped spark plugs as frequently as the con- maintenance intervals. When replacing the ventional type spark plugs since they will last filter, wipe the inside of the air cleaner housing much longer. Follow the maintenance sched- and the cover with a damp cloth. ule but, do not reuse them by cleaning or regapping. WARNING If replacement is required, see your NISSAN dealer for servicing. ¼ Operating the engine with the air Always replace with recommended cleaner removed can cause you or platinum-tipped spark plugs. others to be burned. The air cleaner

8-16 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ WINDSHIELD WIPER BLADES

CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water. Clean the blade by wiping it with a cloth soaked in a washer solution or a mild deter- gent. Then rinse the blade with clear water. If your windshield is still not clear after cleaning DI1018M the blades and using the wiper, replace the blades. REPLACEMENT CAUTION 1. Pull the wiper arm. 2. Push the lock pin, then remove the wiper After wiper blade replacement, return blade. the wiper arm to its original position. 3. Insert the new wiper blade to the wiper arm Otherwise it may be damaged when the until a click sounds. engine hood is opened. Make sure the wiper blade contacts the glass, otherwise the arm may be dam- aged from wind pressure.

Do-it-yourself 8-17

੬ 00.1.17/A33-D/V5.0 ੭ PARKING BRAKE AND BRAKE PEDAL

SDI0125 DI1020MH CHECKING PARKING BRAKE CHECKING BRAKE PEDAL From the released position, pull the parking With the engine running, check the distance brake lever up slowly and firmly. If the number between the upper surface of the pedal and of clicks is out of the range listed above, see the metal floor. If it is out of the range shown your NISSAN dealer. above, see your NISSAN dealer. Self-adjusting brakes SDI0146 Your vehicle is equipped with self-adjusting If you wax the surface of the hood, be brakes. careful not to let wax get into the washer The disc-type brakes self-adjust every time the nozzle. This may cause clogging or im- brake pedal is applied. proper windshield washer operation. If wax gets into the nozzle, remove it with a needle or small pin.

8-18 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ CLUTCH PEDAL

BRAKE BOOSTER WARNING Check the brake booster function as follows: See your NISSAN dealer and have it 1. With the engine off, press and release the checked if the brake pedal height does brake pedal several times. When brake pedal movement (distance of travel) re- not return to normal. mains the same from one pedal application to the next, continue on to the next step. Brake pad wear indicators 2. While depressing the brake pedal, start the The disc brake pads on your vehicle have engine. The pedal height should drop a audible wear indicators. When a brake pad little. requires replacement, it will make a high 3. With the brake pedal depressed, stop the pitched scraping or screeching sound when engine. Keeping the pedal depressed for the vehicle is in motion whether or not the about 30 seconds, the pedal height should DI1021MC brake pedal is depressed. Have the brakes not change. checked as soon as possible if the wear indi- Press the pedal by hand and be sure the free cator sound is heard. 4. Run the engine for one minute without travel is within the limits shown above. If free depressing the brake pedal, then turn it off. travel is too little or too much, see your Under some driving or climate conditions, oc- Depress the brake pedal several times. The NISSAN dealer. casional brake squeak, squeal or other noise pedal travel distance will decrease gradu- may be heard. Occasional brake noise during ally with each depression as the vacuum is light to moderate stops is normal and does not released from the booster. affect the function or performance of the brake system. If the brakes do not operate properly, see your NISSAN dealer. Proper brake inspection intervals should be followed. For additional information, see “Periodic maintenance schedules” in the “9. Maintenance” section for maintenance inter- vals.

Do-it-yourself 8-19

੬ 00.1.17/A33-D/V5.0 ੭ FUSES

system checked and repaired by your CAUTION NISSAN dealer.

Never use a fuse of higher amperage rating than that specified on the fuse box cover. This could damage the elec- trical system or cause a fire.

SDI0964 ENGINE COMPARTMENT If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition key and headlight switch are OFF. 2. Open the engine hood. 3. Remove the fusible link cover. 4. Remove the fuse with the fuse puller. 5. If the fuse is open, replace it with a new fuse. 6. If a new fuse also opens, have the electrical 8-20 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ SDI0965 SDI0966 Fusible links PASSENGER COMPARTMENT If any electrical equipment does not operate If any electrical equipment does not operate, and fuses are in good condition, check the check for an open fuse. fusible links. If any of these fusible links are 1. Be sure the ignition key and the headlight melted, replace only with genuine NISSAN switch are OFF. parts. 2. Pull to open the fuse box lid. 3. Remove the fuse with the fuse puller. 4. If the fuse is open, replace it with a new fuse. 5. If a new fuse also opens, have the electrical system checked and repaired by your NISSAN dealer.

Do-it-yourself 8-21

੬ 00.1.17/A33-D/V5.0 ੭ MULTI-REMOTE CONTROLLER BATTERY REPLACEMENT Make sure that the ⊕ side faces the Industry Canada. Operation is subject to bottom case. the following two conditions: (1) This de- vice may not cause harmful interference, 3. Close the lid securely. and (2) this device must accept any inter- 4. Push the remote controller button two or ference received, including interference three times to check its operation. that may cause undesired operation of the device. See your NISSAN dealer if you need any assistance for replacement. If the battery is removed for any reason other than replacement, perform step 4 above. ¼ Be careful not to touch a circuit board and a battery terminal. ¼ An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal. ¼ The remote controller is water-resistant; however, if it does get wet, immediately wipe completely dry. ¼ When changing batteries, do not let dust SPA1046 or oil get on the controller. Replace the battery as follows: FCC Notice: 1. Open the lid using a suitable tool. Changes or modifications not expressly approved by the manufacturer compliance 2. Replace the battery with a new one. could void the user’s authority to operate Recommended battery: Sanyo CR2025 or the equipment. This device complies with equivalent Part 15 of the FCC Rules and RSS-210 of 8-22 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ LIGHTS

SDI0976 Do-it-yourself 8-23

੬ 00.1.17/A33-D/V5.0 ੭ HEADLIGHTS Replacing the headlight bulb The headlight is a semi-sealed beam type 1. Disconnect the battery negative cable. which uses a replaceable headlight (halogen) 2. Disconnect the electrical connector from bulb. A bulb can be replaced from inside the the rear end of the bulb. engine compartment without removing the headlight assembly. 3. Pull off the rubber cap. 4. Push and turn the retaining pin to loosen it. CAUTION 5. Remove the headlight bulb. Do not shake or rotate the bulb when removing it. High pressure halogen gas is sealed inside the halogen bulb. The bulb may 6. Install the new bulb in the reverse order of break if the glass envelope is scratched removal. or the bulb is dropped. Aiming is not necessary after replacing the bulb. When aiming adjustment is neces- When handling the bulb, do not touch sary, contact your NISSAN dealer. the glass envelope.

SDI0967 8-24 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ EXTERIOR AND INTERIOR LIGHTS CAUTION Item Wattage (W) Bulb No. ¼ Do not touch the bulb. Front turn signal/Clearance light 27/8 S25 ¼ Use the same number and wattage as Front side marker light 3.8 T10 originally installed: See an authorized NISSAN Front fog light (if so equipped) Wattage 60/55 dealer for assistance. Bulb no. HB2 Rear combination light ¼ Do not leave the bulb out of the head- Turn signal 21 PY21W light reflector for a long period of time as dust, moisture, and smoke may Stop/Tail 21/5 T20 enter the headlight body and affect Back-up 13 T16 the performance of the headlight. Rear side marker light 3.8 T10 License plate light 5 High-mounted stop light (if so 21 T20 equipped)

Interior light 10 Front personal light 10 Step light 2.7 161 Trunk light 3.4 158

Vanity mirror light (if so equipped) 1.4 —

Do-it-yourself 8-25

੬ 00.1.17/A33-D/V5.0 ੭ SDI0968

MDI0006 Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens and/or cover.

SDI0969 8-26 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ SDI0970 Do-it-yourself 8-27

੬ 00.1.17/A33-D/V5.0 ੭ SDI0972 8-28 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ SDI0333A

SDI0971 SDI0756 Do-it-yourself 8-29

੬ 00.1.17/A33-D/V5.0 ੭ TIRES AND WHEELS

less than 1 mile (1.6 km). COLD tire pressures are shown on the tire placard affixed to the with high speed capability tires. Driv- glove box lid. ing faster than 85 MPH (140 km/h) may result in tire failure, loss of con- WARNING trol and possible injury.

¼ Improperly inflated tires can fail sud- TYPES OF TIRES denly and cause an accident. ¼ The vehicle capacity weight is indi- CAUTION cated on the tire placard. Do not load your vehicle beyond this capacity. When changing or replacing tires, be Overloading your vehicle may result sure all four tires are of the same type DI1033M in reduced tire life, unsafe operating (i.e., summer, all season or snow) and conditions due to premature tire fail- construction. Your NISSAN dealer may If you have a flat tire, see “Flat tire” in the ure, or unfavorable handling charac- “6. In case of emergency” section. be able to help you with information teristics and could also lead to a about tire type, size, speed rating and TIRE PRESSURE serious accident. Loading beyond the availability. Replacement tires may have specified capacity may also result in Maximum inflation pressure a lower speed rating than the factory failure of other vehicle components. equipped tires, and may not match the Do not exceed the maximum inflation pres- ¼ potential maximum vehicle speed. Never sures shown on the side wall of the tire. Before taking a long trip, or whenever exceed the maximum speed rating of the Tire inflation pressure you have loaded your vehicle heavily, use a tire pressure gauge to ensure tire. Periodically check the tire pressure (including that the tire pressure is at the speci- spare). Incorrect tire pressure may adversely fied level. affect tire life and vehicle handling. Tire pres- All season tires ¼ Do not drive your vehicle over 85 sure should be checked when tires are COLD. NISSAN specifies all season tires on some MPH (140 km/h) unless it is equipped Tires are considered COLD after the vehicle models to provide good performance for use has been parked for 3 or more hours, or driven 8-30 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ all year around, including snowy and icy road If you operate your vehicle in snowy or icy Never install tire chains on a T-type spare tire. conditions. All season tires are identified by conditions, NISSAN recommends the use of Do not use the chains on dry roads. ALL SEASON and/or M&S on the tire sidewall. snow or all season tires on all four wheels. Snow tires have better snow traction than all For additional traction on icy roads, studded season tires and may be more appropriate in tires may be used. However, some provinces some areas. and states prohibit their use. Check local, state Summer tires and provincial laws before installing studded tires. Skid and traction capabilities of studded NISSAN specifies summer tires on some mod- snow tires, on wet or dry surfaces, may be els to provide superior performance on dry poorer than that of non-studded snow tires. roads. Summer tire performance in snow and ice will be substantially reduced. Summer tires TIRE CHAINS do not have the tire traction rating M&S on the Use of tire chains may be prohibited according tire sidewall. to location. Check the local laws before install- If you operate your vehicle in snowy or icy ing tire chains. When installing tire chains, conditions, NISSAN recommends the use of make sure they are of proper size for the tires snow or all season tires on all four wheels. on your vehicle and are installed according to the chain manufacturer’s suggestions. Use Snow tires only SAE class S chains. Other types may damage your vehicle. Use chain tensioners If snow tires are needed, it is necessary to when recommended by the tire chain manu- select tires equivalent in size and load rating to facturer to ensure a tight fit. Loose end links of the original equipment tires. If you do not, it the tire chain must be secured or removed to can adversely affect the safety and handling of prevent the possibility of whipping action dam- your vehicle. age to the fenders or undercarriage. If pos- Generally, snow tires will have lower speed sible, avoid fully loading your vehicle when ratings than factory equipped tires and may using tire chains. In addition, drive at a re- not match the potential maximum vehicle duced speed. Otherwise, your vehicle may be speed. Never exceed the maximum speed damaged and/or vehicle handling and perfor- rating of the tire. mance may be adversely affected. Do-it-yourself 8-31

੬ 00.1.17/A33-D/V5.0 ੭ WARNING

¼ After rotating the tires, adjust the tire pressure. ¼ Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). ¼ Do not include the T-type spare tire or any other small size spare tire in the tire rotation. DI0048-B MDI0004 CHANGING TIRES AND WHEELS Tire wear and damage Tire rotation WARNING NISSAN recommends that tires be rotated every 7,500 miles (12,000 km). Tires should be periodically inspected Wheel nut tightening torque: for wear, cracking, bulging, or objects ⋅ 80 ft-lb (108 N m) caught in the tread. If excessive wear, See “Flat tire” in the “6. In case of emergency” cracks, bulging, or deep cuts are found, section for tire replacing procedures. the tire should be replaced. The original tires have a built-in tread wear indicator. When the wear indicator is visible, the tire should be replaced.

8-32 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ Wheel balance service should be performed Improper service for a T-type spare tire accidents and could result in serious with the wheels off the vehicle. Spin balancing may result in serious personal injury. If it personal injury. the front wheels on the vehicle could lead to is necessary to repair the T-type spare transmission damage. ¼ If the wheels are changed for any tire, contact your NISSAN dealer. reason, always replace with wheels Care of wheels which have the same offset dimen- ¼ sion. Wheels of a different offset Wash the wheels when washing the vehicle Replacing tires and wheels to maintain their appearance. could cause early tire wear, possibly When replacing a tire, use the same size, degraded vehicle handling character- ¼ Clean the inner side of the wheels when the speed rating and load carrying capacity as istics and/or interference with the wheel is changed or the underside of the originally equipped. See “Specifications” in the brake discs. Such interference can vehicle is washed. “10. Technical and consumer information” sec- lead to decreased braking efficiency tion for recommended types and sizes of tires ¼ Do not use abrasive cleaners when wash- and/or early brake pad wear. and wheels. ing the wheels. ¼ Do not install a deformed wheel or ¼ Inspect wheel rims regularly for dents or WARNING tire even if it has been repaired. Such corrosion. Such damage may cause loss of wheels or tires could have structural pressure or poor seal at the tire bead. damage and could fail without warn- ¼ The use of tires other than those ¼ NISSAN recommends that the road wheels ing. recommended or the mixed use of be waxed to protect against road salt in tires of different brands, construction ¼ The use of retread tire is not recom- areas where it is used during winter. (bias, bias-belted or radial), or tread mended. patterns can adversely affect the ride, Spare tire (T-type spare tire) braking, handling, ground clearance, US only. Canadian vehicles are equipped with body-to-tire clearance, tire chain Wheel balance a full size spare tire. clearance, speedometer calibration, Unbalanced wheels may affect vehicle han- Observe the following precautions if the T-type headlight aim and bumper height. dling and tire life. Even with regular use, spare tire must be used, otherwise your ve- Some of these effects may lead to wheels can get out of balance. Therefore, they hicle could be damaged or involved in an should be balanced as required. accident. Do-it-yourself 8-33

੬ 00.1.17/A33-D/V5.0 ੭ CAUTION spare tire. Tire chains will not fit prop- spare tire at the same time. erly on the T-type spare tire and may ¼ Do not tow a trailer while the T-type cause damage to the vehicle. ¼ The T-type spare tire should be used spare tire is installed. only for emergency. It should be re- ¼ When driving on roads covered with placed by the standard tire at the first snow or ice, the T-type spare tire opportunity. should be used on the rear wheel and ¼ Drive carefully while the T-type spare the original tire used on the front tire is installed. wheels (drive wheels). Use tire chains only on the front two original tires. Avoid sharp turns and abrupt braking ¼ while driving. Tire tread of the T-type spare tire will wear at a faster rate than the original ¼ Periodically check the T-type spare tire. Replace the T-type spare tire as tire inflation pressure, and always soon as the tread wear indicators keep it at 60 psi (420 kPa, 4.2 bar). appear. ¼ Always keep the pressure of the full ¼ Because the T-type spare tire is size spare tire (if so equipped) at the smaller than the original tire, ground recommended pressure for standard clearance is reduced. To avoid dam- tires, as indicated on the tire placard. age to the vehicle do not drive over For tire placard location, see “Tire obstacles. Also do not drive the ve- placard” in the “10. Technical and hicle through an automatic car wash consumer information”. since it may get caught. ¼ Do not drive your vehicle at speeds ¼ Do not use the T-type spare tire on faster than 50 MPH (80 km/h). other vehicles. ¼ Do not use tire chains on a T-type ¼ Do not use more than one T-type

8-34 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

Do-it-yourself 8-35

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

8-36 Do-it-yourself

੬ 00.1.17/A33-D/V5.0 ੭ 9 Maintenance

General maintenance...... 9-3 Schedule 1 ...... 9-5 Explanation of maintenance items ...... 9-3 Schedule 2 ...... 9-5 Periodic maintenance schedules ...... 9-5 Explanation of maintenance items ...... 9-10

੬ 00.1.17/A33-D/V5.0 ੭ Your new NISSAN has been designed to have However, under severe driving conditions, ad- minimum maintenance requirements with ditional or more frequent maintenance will be longer service intervals to save you both time required. and money. However, some day-to-day and Where to go for service: regular maintenance is essential to maintain your NISSAN’s good mechanical condition, as If maintenance service is required or your well as its emission and engine performance. vehicle appears to malfunction, have the sys- tems checked and tuned by an authorized It is the owner’s responsibility to make sure NISSAN dealer. that the specified maintenance, as well as general maintenance, is performed. NISSAN technicians are well-trained special- ists and are kept up to date with the latest As the vehicle owner, you are the only one service information through technical bulletins, who can ensure that your vehicle receives the service tips, and in-dealership training pro- proper maintenance care. You are a vital link grams. They are completely qualified to work in the maintenance chain. on NISSAN’s vehicles before they work on your vehicle, rather than after they have General maintenance: worked on it. General maintenance includes those items You can be confident that your NISSAN deal- which should be checked during normal day- er’s service department performs the best job to-day operation of the vehicle. They are es- to meet the maintenance requirements on your sential if your vehicle is to continue to operate vehicle — in a reliable and economic way. properly. It is your responsibility to perform these procedures regularly as prescribed. These checks or inspections can be done by yourself, a qualified technician or, if you prefer, your NISSAN dealer. Periodic maintenance: The maintenance items listed in this part are required to be serviced at regular intervals. 9-2 Maintenance

੬ 00.1.17/A33-D/V5.0 ੭ GENERAL MAINTENANCE

During the normal day-to-day operation of the loose nuts. Tighten if necessary. performing periodic maintenance, cleaning the vehicle, general maintenance should be per- vehicle, etc. Tire rotation*: Tires should be rotated every formed regularly as prescribed in this section. 7,500 miles (12,000 km). Lights*: Make sure that the headlights, stop If you detect any unusual sounds, vibrations or lights, tail lights, turn signal lights, and other smell, be sure to check for the cause or have Wheel alignment and balance: If the vehicle lights are all operating properly and installed your NISSAN dealer do it promptly. In addition, pulls to either side while driving on a straight securely. Also check headlight aim. you should notify your NISSAN dealer if you and level road, or if you detect uneven or think that repairs are required. abnormal tire wear, there may be a need for Warning lights and chimes: Make sure that When performing any checks or maintenance wheel alignment. all warning lights and chimes are operating properly. work, see “Maintenance precautions” in the “8. If the steering wheel or seat vibrates at normal Do-it-yourself” section. highway speeds, wheel balancing may be Windshield wiper and washer*: Check that EXPLANATION OF MAINTENANCE needed. the wipers and washer operate properly and that the wipers do not streak. ITEMS Windshield wiper blades*: Check for cracks Additional information on the following or wear if they do not wipe properly. Windshield defroster: Check that the air comes out of the defroster outlets properly and items with “*” is found in the “8. Do-it- Doors and engine hood: Check that all doors in good quantity when operating the heater or yourself” section. and the engine hood operate smoothly as well air conditioner. Outside the vehicle as the trunk lid or back hatch. Also make sure that all latches lock securely. Lubricate if nec- Steering wheel: Check for changes in the The maintenance items listed here should be essary. Make sure that the secondary latch steering conditions, such as excessive free performed from time to time, unless otherwise keeps the hood from opening when the pri- play, hard steering or strange noises. specified. mary latch is released. Seats: Check seat position controls such as Tires*: Check the pressure with a gauge pe- When driving in areas using road salt or other seat adjusters, seatback recliner, etc. to en- riodically when at a service station, including corrosive materials, check lubrication fre- sure they operate smoothly and that all latches the spare, and adjust to the specified pressure quently. lock securely in every position. Check that the if necessary. Check carefully for damage, cuts head restraints move up and down smoothly or excessive wear. Inside the vehicle and that the locks (if equipped) hold securely in all latched positions. Wheel nuts*: When checking the tires, make The maintenance items listed here should be sure no nuts are missing, and check for any checked on a regular basis, such as when Seat belts: Check that all parts of the seat belt Maintenance 9-3

੬ 00.1.17/A33-D/V5.0 ੭ system (for example, buckles, anchors, adjust- Under the hood and the vehicle off. Check the lines for proper attachment, ers and retractors) operate properly and leaks, cracks, etc. smoothly, and are installed securely. Check The maintenance items listed here should be Automatic transaxle fluid level*: Check the the belt webbing for cuts, fraying, wear or checked periodically (for example, each time level on the dipstick after putting the selector damage. you check the engine oil or refuel). lever in P (Park) position with the engine idling. Accelerator pedal: Check the pedal for Windshield washer fluid*: Check that there Exhaust system: Make sure there are no smooth operation and make sure the pedal is adequate fluid in the tank. loose supports, cracks or holes. If the sound of does not catch or require uneven effort. Keep Engine coolant level*: Check the coolant the floor mats away from the pedal. the exhaust seems unusual or there is a smell level when the engine is cold. of exhaust fumes, immediately locate the Clutch pedal*: Make sure the pedal operates Radiator and hoses: Check the front of the trouble and correct it. (See “Precautions when smoothly and check that it has the proper free radiator and clean off any dirt, insects, leaves, starting and driving” in the “5. Starting and play. etc., that may have accumulated. Make sure driving” section for exhaust gas (carbon mon- oxide).) Brakes: Check that the brakes do not pull the the hoses have no cracks, deformation, dete- vehicle to one side when applied. rioration or loose connections. Underbody: The underbody is frequently ex- posed to corrosive substances such as those Brake pedal and booster*: Check the pedal Brake and clutch fluid levels*: Make sure used on icy roads or to control dust. It is very for smooth operation and make sure it has the that the brake and clutch fluid levels are be- important to remove these substances, other- proper distance under it when depressed fully. tween the MAX and MIN lines on the reservoir. wise rust will form on the floor pan, frame, fuel Check the brake booster function. Be sure to lines and around the exhaust system. At the keep floor mats away from the pedal. Battery*: Check the fluid level in each cell. It should be between the MAX and MIN lines. end of winter, the underbody should be thor- Parking brake*: Check that the lever has the oughly flushed with plain water, being careful proper travel and make sure that the vehicle is Engine drive belts*: Make sure that no belt is to clean those areas where mud and dirt may held securely on a fairly steep hill when only frayed, worn, cracked or oily. accumulate. For additional information, see the parking brake is applied. “Cleaning exterior” in the “7. Appearance and Engine oil level*: Check the level on the care” section. Automatic transaxle P (Park) position dipstick after parking the vehicle on a level mechanism: On a fairly steep hill check that spot and turning off the engine. Fluid leaks: Check under the vehicle for fuel, the vehicle is held securely with the selector oil, water or other fluid leaks after the vehicle lever in the P (Park) position without applying Power steering fluid level* and lines: Check has been parked for a while. Water dripping any brakes. the level in the reservoir tank with the engine from the air conditioner after use is normal. If 9-4 Maintenance

੬ 00.1.17/A33-D/V5.0 ੭ PERIODIC MAINTENANCE SCHEDULES you should notice any leaks or if gasoline To ensure smooth, trouble-free, safe and eco- ¼ driving in dusty conditions. fumes are evident, check for the cause and nomical driving, NISSAN provides two differ- ¼ driving on rough, muddy, or salt spread have it corrected immediately. ent maintenance schedules that may be used, roads. depending upon the conditions in which you usually drive. These schedules contain both ¼ towing a trailer, using a camper or a distance and time intervals, up to 60,000 miles car-top carrier. (96,000 km)/48 months. For most people, the odometer reading will indicate when service is SCHEDULE 2 needed. However, if you drive very little, your Follow Periodic Maintenance Schedule 2 if vehicle should be serviced at the regular time none of the driving conditions shown in Sched- intervals shown in the schedule. After 60,000 ule 1 apply to your driving habits. miles (96,000 km) or 48 months, continue the periodic maintenance at the same mileage/time intervals. SCHEDULE 1 Follow Periodic Maintenance Schedule 1 if your driving habits frequently include one or more of the following driving conditions: ¼ repeated short trips of less than 5 miles (8 km). ¼ repeated short trips of less than 10 miles (16 km) with outside temperatures re- maining below freezing. ¼ operating in hot weather in stop-and-go rush hour traffic. ¼ extensive idling and/or low speed driv- ing for long distances, such as police, taxi or door-to-door delivery use. Maintenance 9-5

੬ 00.1.17/A33-D/V5.0 ੭ Schedule 1 Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only

MAINTENANCE OPERATION MAINTENANCE INTERVAL Perform at number of miles, Miles x 1,000 3.8 7.5 11.3 15 18.8 22.5 26.3 30 33.8 37.5 41.3 45 48.8 52.5 56.3 60 kilometers or months, which- (km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96) ever comes first. Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 Emission control system maintenance Drive belts See NOTE (1) I* Air cleaner filter See NOTE (2) [R] [R] EVAP vapor lines I* I* Fuel lines I* I* Fuel filter See NOTE (3) Engine coolant See NOTE (4) R* Engine oil RRRRRRRRRRRRRRRR Engine oil filter (Use part No. 15208-31U01 or equivalent) RRRRRRRRRRRRRRRR Spark plugs (Use PLATINUM-TIPPED type) Replace every 105,000 miles (169,000 km) Intake & exhaust valve clear- ance* See NOTE (5)

NOTE: (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. (2) If operating mainly in dusty conditions, more frequent maintenance may be required. (3) Maintenance free item (4) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months. (5) If valve noise increases, inspect valve clearance. ★ Maintenance items and intervals with “*” are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.

9-6 Maintenance

੬ 00.1.17/A33-D/V5.0 ੭ Schedule 1 Abbreviations: I = Inspect. Correct or replace if necessary.

MAINTENANCE OPERATION MAINTENANCE INTERVAL

Miles x 1,000 3.8 7.5 11.3 15 18.8 22.5 26.3 30 33.8 37.5 41.3 45 48.8 52.5 56.3 60 Perform at number of miles, kilometers or months, whichever comes first. (km x 1,000) (6) (12) (18) (24) (30) (36) (42) (48) (54) (60) (66) (72) (78) (84) (90) (96) Months 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 Chassis and body maintenance

Brake lines & cables IIII

Brake pads & rotors IIIIIIII

Manual transaxle oil or automatic transaxle fluid See NOTE (1). IIII

Steering gear & linkage, axle & suspension parts IIIIIIII

Tire rotation See NOTE (3).

Exhaust system IIIIIIII

Front drive shaft boots IIIIIIII

Supplemental air bag system and supplemental side air bag systems See NOTE (2).

Automatic Speed Control Device (ASCD) vacuum hoses IIII

NOTE: (1) If towing a trailer, using a camper or a car-top carrier, or driving on rough or muddy roads, change (not just inspect) oil at every 30,000 miles (48,000 km) or 24 months. (2) Inspect the supplemental air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S. certification label. (3) Refer to “Tire rotation” under the “General maintenance” heading earlier in this section.

Maintenance 9-7

੬ 00.1.17/A33-D/V5.0 ੭ Schedule 2 Abbreviations: R = Replace I = Inspect. Correct or replace if necessary. [ ]: At the mileage intervals only

MAINTENANCE OPERATION MAINTENANCE INTERVAL Miles x 1,000 7.5 15 22.5 30 37.5 45 52.5 60 Perform at number of miles, kilometers (km x 1,000) (12) (24) (36) (48) (60) (72) (84) (96) or months, whichever comes first. Months 6 12 18 24 30 36 42 48 Emission control system maintenance Drive belts See NOTE (1) I* Air cleaner filter [R] [R] EVAP vapor lines I* I* Fuel lines I* I* Fuel filter See NOTE (2) Engine coolant See NOTE (3) R* Engine oil RRRRRRRR Engine oil filter (Use part No. 15208-31U01 or equivalent) RRRRRRRR Spark plugs (Use PLATINUM-TIPPED type) Replace every 105,000 miles (169,000 km) Intake & exhaust valve clearance* See NOTE (4) NOTE: (1) After 60,000 miles (96,000 km) or 48 months, inspect every 15,000 miles (24,000 km) or 12 months. (2) Maintenance free item (3) After 60,000 miles (96,000 km) or 48 months, replace every 30,000 miles (48,000 km) or 24 months. (4) If valve noise increases, inspect valve clearance. ★ Maintenance items and intervals with “*” are recommended by NISSAN for reliable vehicle operation. The owner need not perform such maintenance in order to maintain the emission warranty or manufacturer recall liability. Other maintenance items and intervals are required.

9-8 Maintenance

੬ 00.1.17/A33-D/V5.0 ੭ Schedule 2 Abbreviations: I = Inspect. Correct or replace if necessary. MAINTENANCE OPERATION MAINTENANCE INTERVAL

Miles x 1,000 7.5 15 22.5 30 37.5 45 52.5 60 Perform at number of miles, kilometers or (km x 1,000) (12) (24) (36) (48) (60) (72) (84) (96) months, whichever comes first. Months 6 12 18 24 30 36 42 48 Chassis and body maintenance Brake lines & cables IIII Brake pads & rotors IIII Manual transaxle oil & automatic transaxle fluid IIII Steering gear & linkage, axle & suspension parts I I Tire rotation See NOTE (2). Exhaust system II Front drive shaft boots IIII Supplemental air bag system and supple- See NOTE (1). mental side air bag systems

Automatic Speed Control Device (ASCD) vacuum hoses IIII

NOTE: (1) Inspect the supplemental air bag systems 10 years after the date of manufacture noted on the F.M.V.S.S. certification label. (2) Refer to “Tire rotation” under the “General maintenance” heading earlier in this section.

Maintenance 9-9

੬ 00.1.17/A33-D/V5.0 ੭ EXPLANATION OF MAINTENANCE conditions, the engine oil and oil filter should damage, looseness and leakage of oil or ITEMS be replaced in accordance with the mainte- grease. Under severe driving conditions, they nance schedule. However, under severe driv- may have to be inspected more frequently. Additional information on the following ing conditions, they may have to be replaced Exhaust system: Visually check the exhaust more frequently. items with “*” is found in the “8. Do-it- pipes, muffler, and hangers for proper attach- yourself” section. Spark plugs*: Replace with new plugs having ment, leaks, cracks, chafing, abrasion, dete- Emission control system the correct heat range. rioration, etc. Under severe driving conditions, inspection should be performed more fre- maintenance Intake & exhaust valve clearance: Check the quently. valve clearance if valve noise increases. Drive belts*: Check drive belts for wear, fray- Supplemental air bag, and supplemental ing or cracking and also for proper tension. Chassis and body maintenance side air bag (if so equipped) systems: Main- Replace the drive belts if found damaged. Brake lines & cables: Check the brake lines tenance for the supplemental air bags or Air cleaner filter: Under normal driving con- and hoses (including brake booster vacuum supplemental side air bags should be done by ditions, the air cleaner filter should be replaced hoses, connections & check valve) and park- an authorized NISSAN dealer. in accordance with the maintenance schedule. ing brake cables for proper attachment, leaks, Automatic Speed Control Device (ASCD) However, driving the vehicle in dusty areas cracks, chafing, abrasion, deterioration, etc. vacuum hoses: Check vacuum hose (be- may cause more rapid clogging of the element. Brake pads & rotors: Check these and the tween ASCD actuator and ASCD pump) for Consequently, the element may have to be other neighboring brake components for wear, breakage, cracks or fracture. replaced more frequently. deterioration and leaks. Under severe driving EVAP vapor lines: Check EVAP vapor lines conditions, they may have to be inspected and connections for failure or looseness. If more frequently. leaks are found, replace them. Manual transaxle oil & automatic transaxle Fuel lines: Check the fuel hoses, piping and fluid*: Check the fluid level and visually in- connections for leaks, looseness or deteriora- spect for signs of leakage. tion. Replace any parts if they are damaged. Under severe driving conditions, the oil should Engine coolant*: Drain and flush the cooling be replaced at the specified interval. system. Steering gear & linkage, axle & suspension Engine oil & oil filter*: Under normal driving parts, and front drive shaft boots: Check for 9-10 Maintenance

੬ 00.1.17/A33-D/V5.0 ੭ 10 Technical and consumer information

Capacities and recommended fuel/lubricants...... 10-2 Tire placard ...... 10-12 Fuel recommendation...... 10-3 Air conditioner specification label...... 10-12 Engine oil and oil filter recommendation...... 10-5 Installing front license plate...... 10-13 Recommended SAE viscosity number...... 10-6 Vehicle loading information...... 10-14 Air conditioning system refrigerant and lubricant Terms ...... 10-14 recommendations ...... 10-6 Determining vehicle load capacity...... 10-14 Specifications ...... 10-7 Loading tips ...... 10-15 Engine ...... 10-7 Towing a trailer ...... 10-15 Tires and wheels ...... 10-9 Maximum load limits...... 10-16 Dimensions and weights ...... 10-9 Towing safety ...... 10-17 When traveling or registering your vehicle in Uniform tire quality grading...... 10-19 another country ...... 10-10 Emission control system warranty ...... 10-20 Vehicle identification ...... 10-10 Reporting safety defects (US only)...... 10-20 Vehicle identification number (VIN) plate...... 10-10 Vehicle identification number Readiness for inspection/maintenance (I/M) test (Chassis number) ...... 10-10 (US only) ...... 10-21 Engine serial number ...... 10-11 Owner’s Manual/Service Manual order F.M.V.S.S. certification label ...... 10-11 information...... 10-22 Emission control information label ...... 10-11 In the event of a collision...... 10-22

੬ 00.1.17/A33-D/V5.0 ੭ CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended US Imp Liter specifications measure measure Fuel 18-1/2 gal 15-3/8 gal 70 Unleaded gasoline with an octane rating of at least 91 AKI (RON 96)*1 Engine oil*6 Drain and refill ¼ With oil filter change 4-1/4 qt 3-1/2 qt 4.0 API Certification Mark*2, *3 ¼ API grade SG/SH, Energy ConservingI&IIorAPIgrade SJ, Energy Conserving*2, *3 Without oil filter change 3-7/8 qt 3-1/4 qt 3.7 ¼ ILSAC grade GF-I & GF-II*2, *3 Cooling system With reservoir 8-1/8 qt 6-3/4 qt 7.7 Genuine NISSAN anti-freeze coolant or equivalent Reservoir 3/4 qt 5/8 qt 0.7 Manual transmission gear oil — — — API GL-4, Viscosity SAE 75W-90 only Nissan Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Auto- Automatic transmission fluid Refill to the proper oil level according to the instructions matic Transmission Fluid*4 Power steering fluid in the “8. Do-it-yourself” section. Genuine Nissan PSFII or equivalent*8 Brake and clutch fluid Genuine Nissan Brake Fluid*5 or equivalent DOT 3 (US FMVSS No. 116) Multi-purpose grease — — — NLGI No. 2 (Lithium soap base) Air conditioning system refrigerant — — — HFC-134a (R-134a)*7 Nissan A/C System Oil Air conditioning system lubricants — — — Type S or exact equivalent

*1: For additional information, see later in this paragraph for fuel recommendation. *2: For additional information, see later in this paragraph for engine oil and oil filter recommendation. *3: For additional information, see later in this paragraph for recommended SAE viscosity number. *4: DexronTM III/MerconTM or equivalent may also be used. Outside the continental United States and Alaska contact a NISSAN dealer for more information regarding suitable fluids, including recommended brand(s) of DexronTM III/MerconTM automatic transmission fluid. *5: Available in mainland US through your NISSAN dealer. *6: For additional information, see “Engine oil” in the “8. Do-it-yourself” section for changing engine oil. *7: For additional information, see “Vehicle identification” in this section for air conditioner specification label. *8: Genuine Nissan PSFII, Canada Nissan Automatic Transmission fluid, DexronTM III/MerconTM or equivalent ATF may also be used. 10-2 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ FUEL RECOMMENDATION NISSAN supports efforts towards cleaner air priate cosolvents and corrosion inhibi- and suggests that you use reformulated gaso- tors. If not properly formulated with ap- Unleaded premium gasoline with an octane line when available. propriate cosolvents and corrosion rating of at least 91 AKI (Anti-Knock Index) inhibitors, such methanol blends may number (Research octane number 96) Gasoline containing oxygenates cause fuel system damage and/or ve- hicle performance problems. At this If unleaded premium gasoline is not avail- Some fuel suppliers sell gasoline containing time, sufficient data is not available to able, unleaded regular gasoline with an oxygenates such as ethanol, MTBE and ensure that all methanol blends are suit- octane rating of at least 87 AKI (Research methanol with or without advertising their pres- able for use in NISSAN vehicles. octane number 91) can be used. ence. NISSAN does not recommend the use of fuels of which the oxygenate content and the If any undesirable driveability problems such However, for maximum vehicle perfor- fuel compatibility for your NISSAN cannot be as engine stalling and hard hot starting are mance, the use of unleaded premium gaso- readily determined. If in doubt, ask your ser- experienced after using oxygenate-blend fu- line is recommended. vice station manager. els, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. CAUTION If you use oxygenate-blend gasoline, please take the following precautions as the usage of Take care not to spill gasoline during refu- such fuels may cause vehicle performance eling. Gasoline containing oxygenates can Using a fuel other than that specified problems and/or fuel system damage. cause paint damage. could adversely affect the emission con- ¼ The fuel should be unleaded and have Aftermarket fuel additives trol devices and systems, and could an octane rating no lower than that rec- also affect the warranty coverage. ommended for unleaded gasoline. NISSAN does not recommend the use of any fuel additives (i.e. fuel injector cleaner, octane Under no circumstances should a ¼ If an oxygenate-blend, excepting a booster, intake valve deposit removers, etc.) leaded gasoline be used, since this will methanol blend, is used, it should con- which are sold commercially. Many of these damage the three-way catalyst. tain no more than 10% oxygenate. additives intended for gum, varnish or deposit (MTBE may, however, be added up to removal may contain active solvent or similar 15%.) Reformulated gasoline ingredients that can be harmful to the fuel ¼ If a methanol blend is used, it should system and engine. Some fuel suppliers are now producing refor- contain no more than 5% methanol (me- mulated gasolines. These gasolines are spe- thyl alcohol, wood alcohol). It should cially designed to reduce vehicle emissions. also contain a suitable amount of appro- Technical and consumer information 10-3

੬ 00.1.17/A33-D/V5.0 ੭ Octane rating tips are encountered, have your vehicle checked at a NISSAN dealer or other competent service In most parts of North America, you should use facility. unleaded gasoline with an octane rating of at least 87 or 91 AKI (Anti-Knock Index) number. However, now and then you may notice However, you may use unleaded gasoline with light spark knock for a short time while accelerating or driving up hills. This is no an octane rating as low as 85 AKI number in cause for concern, because you get the these high altitude areas [over 4,000 ft (1,219 greatest fuel benefit when there is light m)] such as: Colorado, Montana, New Mexico, spark knock for a short time under heavy Utah, Wyoming, northeastern Nevada, south- engine load. ern Idaho, western South Dakota, western Nebraska, and that part of Texas which is directly south of New Mexico. Using unleaded gasoline with an octane rating lower than stated above can cause persistent, heavy spark knock. (Spark knock is a metallic rapping noise.) If se- vere, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have your dealer correct the condi- tion. Failure to correct the condition is misuse of the vehicle, for which NISSAN is not responsible. Incorrect ignition timing will result in knocking, after-run or overheating. This in turn may cause excessive fuel consumption or damage to the engine. If any of the above symptoms 10-4 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ however, meet the API quality and SAE vis- cosity ratings specified for your vehicle. Do not mix mineral based and synthetic type oils in the engine at the same time. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity STI0077 The engine oil viscosity or thickness changes ENGINE OIL AND OIL FILTER front of the container should be used. This type with temperature. Because of this, it is impor- RECOMMENDATION of oil supersedes the existing API SG or SH tant that the engine oil viscosity be selected and Energy ConservingI&IIcategories. based on the temperatures at which the ve- Selecting the correct oil If you cannot find engine oil with the API hicle will be operated before the next oil change. The recommended SAE viscosity It is essential to choose the correct quality, and certification mark, use an API grade SG/SH, number chart shows the recommended oil viscosity oil to ensure satisfactory engine life Energy ConservingI&IIorAPIgrade SJ, viscosities for the expected ambient tempera- Energy conserving oil. An oil with a single and performance. NISSAN recommends the tures. Choosing an oil viscosity other than that designation SG or SH, or in combination with use of a low friction oil (energy conserving oil) recommended could cause serious engine in order to improve fuel economy and con- other categories (for example, SG/CC or damage. serve energy. Oils which do not have the SG/CD) may also be used if one with the API specified quality label should not be used as certification mark cannot be found. An ILSAC Selecting the correct oil filter they could cause engine damage. grade GF-I & GF-II oil can also be used. Your new vehicle is equipped with a high- Only those engine oils with the American Pe- Mineral based or synthetic type oils may be quality genuine NISSAN oil filter. When replac- troleum Institute (API) certification mark on the used in your NISSAN vehicle. These oils must ing, use the genuine oil filter or its equivalent Technical and consumer information 10-5

੬ 00.1.17/A33-D/V5.0 ੭ for the reason described in change intervals. RECOMMENDED SAE VISCOSITY AIR CONDITIONING SYSTEM Change intervals NUMBER REFRIGERANT AND LUBRICANT RECOMMENDATIONS The oil and oil filter change intervals for your engine are based on the use of the specified The air conditioning system in this NISSAN quality oils and filters. Oil and filter other than vehicle must be charged with the refriger- the specified quality, or oil and filter change ant HFC-134a (R-134a) and the lubricant, intervals longer than recommended could re- Nissan A/C System Oil Type S or the exact duce engine life. Damage to engines caused equivalents. by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the new NISSAN vehicle warran- CAUTION ties. Your engine was filled with a high quality The use of any other refrigerant or lubri- engine oil when it was built. You do not have to cant will cause severe damage to the air change the oil before the first recommended conditioning system and will require the change interval. Oil and filter change intervals replacement of all air conditioner sys- depend upon how you use your vehicle. Op- tem components. eration under the following conditions may require more frequent oil and filter changes. The refrigerant HFC-134a (R-134a) in your ¼ repeated short distance driving at cold out- NISSAN vehicle will not harm the earth’s side temperatures, ozone layer. Although this refrigerant does not ¼ driving in dusty conditions, affect the earth’s atmosphere, certain govern- mental regulations require the recovery and ¼ extensive idling, TI1028-C recycling of any refrigerant during automotive ¼ towing a trailer. SAE 5W-30 viscosity oil is preferred for all air conditioning system service. Your NISSAN ambient temperatures. SAE 10W-30, dealer has the trained technicians and equip- 10W-40 viscosity oil may be used if the ment needed to recover and recycle your air ambient temperature is above 0°F (−18°C). conditioning system refrigerant.

10-6 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ SPECIFICATIONS

Contact your NISSAN dealer when servicing ENGINE your air conditioning system. Model VQ30DE Type Gasoline, 4-cycle Cylinder arrangement 6-cylinder, V-slanted at 60° Bore x Stroke in (mm) 3.66 x 2.886 (93.0 x 73.3) Displacement cu in (cm3) 182.33 (2,988) Firing order 1-2-3-4-5-6* Idle speed rpm See the emission control label on Ignition timing (B.T.D.C.) degree/rpm the underside of the hood. CO percentage at idle speed [No air] % Standard PFR5G-11 Spark plug Service option PFR4G-11, PFR6G-11 Spark plug gap (Normal) in (mm) 0.043 (1.1) Camshaft operation Timing chain Alternator belt size Width x Length in (mm) 0.8409 x 43.11 (21.36 x 1,095)

TI1009-A

Technical and consumer information 10-7

੬ 00.1.17/A33-D/V5.0 ੭ The spark ignition system of this vehicle meets all requirements of the Canadian Interference-Causing Equipment Regula- tions.

10-8 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ TIRES AND WHEELS DIMENSIONS AND WEIGHTS

Type Size Offset in (mm) Sedan Steel 15 x 6JJ 1.57 (40) Overall length in (mm) 190.4 (4,838) Road wheel 16 x 6.5JJ 1.57 (40) Overall width in (mm) 70.3 (1,785) Aluminum 17 x 7JJ (option) 1.75 (45) Overall height in (mm) 56.5 (1,435) P205/65R15 92H 60.2 (1,530)*1 Front tread in (mm) Conventional P215/55R16 91H 59.8 (1,520)*2 P225/50R17 93V (option) 59.4 (1,510)*1 Rear tread in (mm) Tire Conventional*1 59.1 (1,500)*2 T125/70D16*2 Spare Wheelbase in (mm) 108.3 (2,750) T125/90D16*3 T135/90D16*4 Gross vehicle weight rating lb (kg) *1: For option Gross axle weight rating See the F.M.V.S.S. certifica- *2: For standard tion label on the driver’s side ″ ″ *3: For models equipped with 15 and 16 size tires (option) Front lb (kg) lock pillar. *4: For models equipped with 17″ size tire (option) Rear lb (kg) *1: For models with road wheel size - 15 x 6JJ, 16 x 6.5JJ *2: For models with aluminum wheel size - 17 x 7JJ

Technical and consumer information 10-9

੬ 00.1.17/A33-D/V5.0 ੭ WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN VEHICLE IDENTIFICATION ANOTHER COUNTRY When planning to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded engine gaso- line. Therefore, avoid taking your vehicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emission control and safety standards vary STI0038 STI0187 according to the country, state, province or VEHICLE IDENTIFICATION VEHICLE IDENTIFICATION district; therefore, vehicle specifications may differ. NUMBER (VIN) PLATE NUMBER (Chassis number) When any vehicle is to be taken into an- The vehicle identification number plate is at- The number is stamped as shown. other country, state, province or district tached as shown. This number is the identifi- and registered, its modifications, transpor- cation for your vehicle and is used in the tation, and registration are the responsibil- vehicle registration. ity of the user. NISSAN is not responsible for any inconvenience that may result.

10-10 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ STI0047 STI0186 STI0188 ENGINE SERIAL NUMBER F.M.V.S.S. CERTIFICATION LABEL EMISSION CONTROL The number is stamped on the engine as The Federal Motor Vehicle Safety Standards INFORMATION LABEL shown. (F.M.V.S.S.) certification label is affixed as The emission control information label is at- shown. This label contains valuable vehicle tached as shown. information, such as: Gross Vehicle Weight Ratings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Number, (VIN), etc. Re- view it carefully.

Technical and consumer information 10-11

੬ 00.1.17/A33-D/V5.0 ੭ STI0206 STI0189 TIRE PLACARD AIR CONDITIONER The cold tire pressure is shown on the tire SPECIFICATION LABEL placard affixed to the console box lid. The air conditioner specification label is affixed inside of the hood as shown.

10-12 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the vinyl bag. ¼ License plate bracket ¼ J-nut x 2 ¼ Screw x 2 ¼ Screw grommet x 2 1. Temporarily place the license plate bracket while aligning points kA of the front bumper fascia with holes kB in the license plate bracket. 2. Remove the license plate bracket.

3. Carefully drill two pilot holes kA using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the fascia, or damage to the nut may occur.) 4. Insert grommets into the hole on the fascia. 5. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the part kC .

STI0191 6. Insert a J-nut into the license plate bracket Technical and consumer information 10-13

੬ 00.1.17/A33-D/V5.0 ੭ VEHICLE LOADING INFORMATION before placing the license plate bracket on ¼ GVWR (Gross Vehicle Weight Rating) - the fascia. WARNING maximum total weight (load) limit specified 7. Install the license plate bracket with screws. for the vehicle. ¼ It is extremely dangerous to ride in a ¼ 8. Install the license plate with bolts that are GAWR (Gross Axle Weight Rating) - maxi- no longer than 0.55 in (14 mm). cargo area inside of a vehicle. In a mum weight (load) limit specified for the collision, people riding in these areas front or rear axle. are more likely to be seriously injured or killed DETERMINING VEHICLE LOAD CAPACITY ¼ Do not allow people to ride in any area of your vehicle that is not The load capacity of this vehicle is determined equipped with seats and seat belts. by weight, not by available cargo space. For example, a luggage rack, bike carrier, cartop ¼ Be sure everyone in your vehicle is in carrier or similar equipment does not increase a seat and using a seat belt properly. load carrying capacity of your vehicle. To determine vehicle load capacity: TERMS Vehicle weight can be determined by using a It is important to familiarize yourself with the commercial-grade scale, found at places such following terms before loading your vehicle: as a truck stop, gravel quarry, grain elevator, or a scrap metal recycling facility. ¼ Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and 1. Determine the curb weight of your vehicle. optional equipment, fluids, emergency 2. Compare the curb weight amount to the tools, and spare tire assembly. This weight GVWR specified for your vehicle to deter- does not include passengers and cargo. mine how much more weight your vehicle can carry. ¼ GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers 3. After loading (cargo and passengers), re- and cargo. weigh your vehicle to determine if either GVWR or GAWR for your vehicle is ex- 10-14 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ TOWING A TRAILER

ceeded. If GVWR is exceeded, remove cargo as necessary. If either the front or and cause personal injury. rear GAWR is exceeded, shift the load or ¼ Overloading can shorten the life of remove cargo as necessary. your vehicle. Failures caused by LOADING TIPS overloading are not covered by your warranty. ¼ The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S. cer- tification label. ¼ Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR.

WARNING TI1011M

¼ Properly secure all cargo to help pre- Your new vehicle was designed to be used vent it from sliding or shifting. Do not primarily to carry passengers and cargo. Re- member that towing a trailer will place addi- place cargo higher than the seat- tional loads on your vehicle’s engine, drive backs. In a sudden stop or collision, train, steering, braking and other systems. unsecured cargo could cause per- sonal injury. Information on trailer towing ability and the special equipment required should be ob- ¼ Do not load your vehicle any heavier tained from your Nissan dealer. He can obtain than the GVWR or the maximum front a Nissan Trailer Towing Guide for you. and rear GAWRs. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could result in loss of control

Technical and consumer information 10-15

੬ 00.1.17/A33-D/V5.0 ੭ MAXIMUM LOAD LIMITS equipment required may be obtained Maximum trailer loads from an authorized NISSAN dealer. Never allow the total trailer load to exceed 1,000 lb (454 kg). The total trailer load equals Tongue load trailer weight plus its cargo weight. Towing loads greater than 1,000 lb (454 kg) or using Keep the tongue load between 9 and 11% of improper towing equipment could adversely the total trailer load. If the tongue load be- affect vehicle handling, braking and perfor- comes excessive, rearrange cargo to allow for mance. proper tongue load. The ability of your vehicle to tow a trailer is not only related to the maximum trailer loads, but also the places you plan to tow. Tow weights TI1012M appropriate for level highway driving may have to be reduced on very steep grades or in low Maximum gross vehicle weight/ traction situations (for example, on slippery maximum gross axle weight boat ramps). The gross vehicle weight of the towing vehicle must not exceed. GVWR shown on the WARNING F.M.V.S.S. certification label. The gross ve- hicle weight equals the combined weight of the Vehicle damage and/or personal injury unloaded vehicle, passengers, luggage, hitch, resulting from improper towing proce- trailer tongue load and any other optional dures are not covered by NISSAN war- equipment. In addition, front or rear gross axle ranties. A Nissan Trailer Towing Guide weight must not exceed GAWR shown on the (U.S. only) containing information on F.M.V.S.S. certification label. trailer towing ability and the special

10-16 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ vehicle and the trailer. The chain should be TOWING LOAD/SPECIFICATION CHART ¼ Do not modify the vehicle exhaust crossed and should be attached to the hitch, Unit: lb (kg) system, brake system, etc. to install a not to the vehicle bumper or axle. Be sure to MAXIMUM trailer hitch. leave enough slack in the chain to permit 1,000 (454) TOWING LOAD turning corners. ¼ To reduce the possibility of additional MAXIMUM 110 (49) damage if your vehicle is struck from Trailer lights TONGUE LOAD the rear, where practical, remove the Trailer lights should comply with federal and/or hitch and/or receiver when not in use. local regulations. When wiring the vehicle for TOWING SAFETY After the hitch is removed, seal the towing, connect the stop and tail light pickup bolt holes to prevent exhaust fumes, Trailer hitch into the vehicle electrical circuit at a point water or dust from entering the pas- between the sensor and stop light or light Choose a proper hitch for your vehicle and senger compartment. trailer. A genuine NISSAN trailer hitch is avail- switch. able from your NISSAN dealer (Canada only). ¼ Regularly check that all hitch mount- Trailer brakes Make sure the trailer hitch is securely attached ing bolts are securely mounted. to the vehicle, to help avoid personal injury or If your trailer is equipped with a braking sys- property damage due to sway caused by tem, make sure it conforms to federal and/or crosswinds, rough road surfaces or passing Tire pressures local regulations and that it is properly in- stalled. trucks. ¼ When towing a trailer, inflate the vehicle tires to the recommended cold tire pressure CAUTION indicated on the tire placard (located on the WARNING inside of the center console lid). Never connect a trailer brake system ¼ Do not use axle-mounted hitches. ¼ Trailer tire condition, size, load rating and proper inflation pressure should be in ac- directly to the vehicle brake system. ¼ The hitch should not be attached to cordance with the trailer and tire manufac- or affect the operation of the impact- turers’ specifications. Pre-towing tips absorbing bumper. Safety chain ¼ Be certain your vehicle maintains a level Always use a suitable chain between your position when a loaded and/or unloaded Technical and consumer information 10-17

੬ 00.1.17/A33-D/V5.0 ੭ trailer is hitched. Do not drive the vehicle if slope is not recommended; however, if you at intervals specified in the recommended it has an abnormal nose-up or nose-down must do so, and if your vehicle is equipped maintenance schedule. condition; check for improper tongue load, with automatic transmission, first block the ¼ When making a turn, your trailer wheels will overload, worn suspension or other pos- wheels and apply the parking brake, and be closer to the inside of the turn than your sible causes of either condition. then move the transmission selector lever vehicle wheels. To compensate for this, into the P (Park) position. If you move the ¼ Always secure items in the trailer to prevent make a larger than normal turning radius selector lever to the P (Park) position be- load shifts while driving. during the turn. fore blocking the wheels and applying the ¼ Be certain your rear view mirrors conform to parking brake, transmission damage could ¼ Crosswinds and rough roads will adversely all federal, state or local regulations. If not, occur. affect vehicle/trailer handling, possibly install any mirrors required for towing be- causing vehicle sway. When being passed ¼ When going down a hill, shift into a lower fore driving the vehicle. by larger vehicles, be prepared for possible gear and use the engine braking effect. changes in crosswinds that could affect When ascending a long grade, downshift Trailer towing tips vehicle handling. If swaying does occur, the transmission to a lower gear and reduce firmly grip the steering wheel, steer straight In order to gain skill and an understanding of speed to reduce chances of engine over- the vehicle’s behavior, you should practice ahead, and immediately (but gradually) re- loading and/or overheating. turning, stopping and backing up in an area duce vehicle speed. This combination will which is free from traffic. Steering stability, and ¼ If the engine coolant rises to an extremely help stabilize the vehicle. Never increase braking performance will be somewhat differ- high temperature when the air conditioning speed. ent than under normal driving conditions. system is on, turn off the air conditioner. ¼ Coolant heat can be additionally vented by Be careful when passing other vehicles. ¼ Always secure items in the trailer to prevent opening the windows, switching the fan Passing while towing a trailer requires con- load shift while driving. control to high and setting the temperature siderably more distance than normal pass- ¼ Avoid abrupt starts, acceleration or stops. control to the HOT position. ing. Remember the length of the trailer must also pass the other vehicle before you ¼ ¼ Avoid sharp turns or lane changes. Trailer towing requires more fuel than nor- can safely change lanes. ¼ mal circumstances. Always drive your vehicle at a moderate ¼ To maintain engine braking efficiency and speed. ¼ Avoid towing a trailer for the first 500 miles electrical charging performance, do not use (800 km). ¼ Always block the wheels on both vehicle fifth gear (manual transmission) or over- and trailer when parking. Parking on a ¼ Have your vehicle serviced more often than drive (automatic transmission). 10-18 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ UNIFORM TIRE QUALITY GRADING ¼ Avoid holding the brake pedal down too DOT (Department Of Transportation) Quality and concrete. A tire marked C may have poor long or too frequently. This could cause the Grades: All passenger car tires must conform traction performance. brakes to overheat, resulting in reduced to federal safety requirements in addition to braking efficiency. these grades. WARNING When towing a trailer, change oil in the Quality grades can be found where applicable transmission more frequently. on the tire sidewall between tread shoulder The traction grade assigned to your ve- See “Periodic maintenance schedules” in and maximum section width. For example: hicle tires is based on straight-ahead the “9. Maintenance” section. Treadwear 200 Traction AA Temperature A braking traction tests, and does not in- clude acceleration, cornering, hydro- Treadwear planing, or peak traction characteristics. Treadwear grade is a comparative rating based on tire wear rate when tested under Temperature A, B and C controlled conditions on specified government test courses. For example, a tire graded 150 Temperature grades are A (the highest), B, would wear one and a half (1-1/2) times as well and C. They represent a tire’s resistance to on the government course as a tire graded heat build-up, and its ability to dissipate heat 100. However, relative tire performance de- when tested under controlled conditions on a specified indoor laboratory test wheel. Sus- pends on actual driving conditions, and may tained high temperature can cause tire mate- vary significantly from the norm due to varia- rial to degenerate, reducing tire life. Excessive tions in driving habits, service practices and temperatures can lead to sudden tire failure. differences in road characteristics and climate. Grade C corresponds to a performance level Traction AA, A, B and C which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. The traction grades, from highest to lowest, 109. Grades A and B represent higher levels of are AA, A, B, and C. Those grades represent performance on laboratory test wheels than the tire’s ability to stop on wet pavement as the minimum required by law. measured under controlled conditions on specified government test surfaces of asphalt

Technical and consumer information 10-19

੬ 00.1.17/A33-D/V5.0 ੭ EMISSION CONTROL SYSTEM REPORTING SAFETY DEFECTS WARRANTY (US only) Your NISSAN is covered by the following If you believe that your vehicle has a WARNING emission warranties. defect which could cause a crash or For US: could cause injury or death, you should The temperature grade for this tire is immediately inform the National High- ¼ Emission Defects Warranty established for a tire that is properly way Traffic Safety Administration inflated and not overloaded. Excessive ¼ Emissions Performance Warranty (NHTSA) in addition to notifying NISSAN. speed, underinflation, or excessive For Canada: loading, either separately or in combina- Emission Control System Warranty If NHTSA receives similar complaints, tion, can cause heat buildup and pos- it may open an investigation, and if it sible tire failure. Details of these warranties may be found with finds that a safety defect exists in a other vehicle warranties in your Warranty In- group of vehicles, it may order a recall formation Booklet (Warranty and Roadside and remedy campaign. However, Assistance Information (Canada only)) that NHTSA cannot become involved in comes with your NISSAN. If you did not re- individual problems between you, your ceive a Warranty Information Booklet (War- ranty and Roadside Assistance Information dealer, or NISSAN. (Canada only)), or it has become lost, you may To contact NHTSA, you may either call obtain a replacement by writing to: the Auto Safety Hotline toll-free at ¼ Nissan North America, Inc. 1-800-424-9393 (or 366-0123 in Wash- Consumer Affairs Department ington, D.C. area) or write to: NHTSA, P.O. Box 191 U.S. Department of Transportation, Gardena. CA. 90248-0191 Washington, D.C. 20590. You can also ¼ Nissan Canada Inc. obtain other information about motor 5290 Orbitor Drive vehicle safety from the Hotline. Mississauga, Ontario, You may notify NISSAN by contacting L4W 4Z5 our Consumer Affairs Department, toll- free, at 1-800-NISSAN-1. In Hawaii call (808) 836-0888.

10-20 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ READINESS FOR INSPECTION/ MAINTENANCE (I/M) TEST (US only) Due to legal requirements in some states/ points between the C and H (normal oper- 3,000 rpm and maintain it for 5 consecutive areas, your vehicle may be required to be in ating temperature). minutes. what is called the ready condition for an 2. Accelerate the vehicle to 55 MPH (88 12.Turn the engine off. Inspection/Maintenance (I/M) test of the emis- km/h), then quickly release the accelerator sion control system. 13.Repeat steps 1 through 8 at least one more pedal completely and keep it released for at time. The vehicle is set to the ready condition when least 6 seconds. it is driven through certain driving patterns. If step 1 through 7 is interrupted, repeat the 3. Quickly depress the accelerator pedal for a Usually, the ready condition can be obtained preceding step. Any safe driving mode is ac- moment, then drive the vehicle at a speed by ordinary usage of the vehicle. ceptable between steps. Do not stop the en- of 53 to 60 MPH (86 to 96 km/h) for at least gine until step 7 is completed. If a powertrain system component is repaired 5 minutes. or the battery is disconnected, the vehicle may 4. Stop the vehicle. be reset to a not ready condition. Before taking the I/M test, drive the vehicle through the 5. Accelerate the vehicle to 35 MPH (55 km/h) following pattern to set the vehicle to the ready and maintain the speed for 20 seconds. condition. If you cannot or do not want to 6. Repeat steps 4 and 5 at least 3 times. perform the driving pattern, an NISSAN dealer can conduct it for you. 7. Accelerate the vehicle to 55 MPH (88 km/h) and maintain the speed for at least 3 min- WARNING utes. 8. Stop the vehicle (shift lever in the “P” or “N” Always drive the vehicle in a safe and position). prudent manner according to traffic con- 9. Rev the engine up between 2,500 and ditions, and obey all traffic laws. 3,500 rpm and hold it for 3 consecutive minutes, then release the accelerator pedal 1. Start the engine when the engine coolant completely. temperature gauge needle points to C. Al- 10.Wait 5 second at idle. low the engine to idle until the gauge needle 11.Rev the engine up between 2,000 and Technical and consumer information 10-21

੬ 00.1.17/A33-D/V5.0 ੭ OWNER’S MANUAL/SERVICE MANUAL ORDER INFORMATION For current pricing and availability of genuine NISSAN Owner’s Manuals for the 2000 model year and prior, see an authorized NISSAN dealer, or contact: DDS Distribution Services, Ltd. 20770 Westwood Dr. Strongsville OH 44136 1-800-247-5321 In Canada: To purchase a copy of a genuine NISSAN Service Manual or Owner’s Manual please contact your nearest NISSAN dealer. For the A genuine NISSAN Service Manual is the best In the USA: phone number and location of a NISSAN source of service and repair information for For current pricing and availability of genuine Dealer in your area call the NISSAN Satisfac- your vehicle. Filled with wiring diagrams, illus- NISSAN Service Manuals for the 2000 model trations and step-by-step diagnostic and ad- tion Center at 1-800-387-0122 and a bilingual year, contact: justment procedures, this manual is the same NISSAN representative will assist you. one used by the factory trained technicians Tweddle Litho Company Also available are Genuine NISSAN Service working at authorized NISSAN dealerships. 1-800-639-8841 and Owner’s Manuals for older NISSAN mod- Also available are genuine NISSAN Owner’s www.nissan-techinfo.com els. Manuals, and genuine NISSAN Service and Owner’s Manuals for older NISSAN models. For current pricing and availability of genuine IN THE EVENT OF A COLLISION NISSAN Service Manuals for the 1999 model year and prior, see an authorized NISSAN Unfortunately, accidents do occur. In this un- dealer, or contact: likely event, there is some important informa- DDS Distribution Services, Ltd. tion you should know. Many insurance compa- 20770 Westwood Dr. nies routinely authorize the use of non- Strongsville OH 44136 genuine collision parts in order to cut costs, 1-800-247-5321 among other reasons.

10-22 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ Insist on the use of Genuine Nissan your vehicle. And some states have enacted Collision Parts! laws that restrict insurance companies from authorizing the use of non-genuine collision If you want your vehicle to be restored using parts during the new vehicle warranty. These parts made to Nissan’s original exacting speci- laws help protect you, so you can take action fications — if you want to help it to last and to protect yourself. hold its resale value, the solution is simple. It’s your right! Tell your insurance agent and your repair shop to only use Genuine Nissan Collision If you should need further information visit us Parts. Nissan does not warrant non-Nissan at: www.nissandriven.com. parts, nor does Nissan’s warranty apply to damage caused by a non-genuine part. Using Genuine Nissan Parts can help protect your personal safety, preserve your warranty protection and maintain the resale value of your vehicle. And if your vehicle was leased, using Genuine Nissan Parts may prevent or limit unnecessary excess wear and tear ex- penses at the end of your lease. Nissan designs its hoods with crumple zones to minimize the risk that the hood will penetrate the windshield of your vehicle in an accident. Non-genuine (imitation) parts may not provide such built in safeguards. Also, non-genuine parts often show premature wear, rust and corrosion. Why should you take a chance? In over 40 states, the law says you must be advised if non-genuine parts are used to repair Technical and consumer information 10-23

੬ 00.1.17/A33-D/V5.0 ੭ MEMO

10-24 Technical and consumer information

੬ 00.1.17/A33-D/V5.0 ੭ 11 Index

Anchor point locations Brake A Top tether strap...... 1-36 Anti-lock brake system (ABS) ...... 5-19 Antenna ABS (Anti-lock brake system)...... 5-19 Brake and clutch fluid...... 8-12 Manual...... 4-25 Air bag system Brake booster ...... 8-19 Power ...... 4-25 Front (See supplemental front airbag Brake pedal ...... 8-18 system) ...... 1-14 Anti-lock Brake System (ABS)...... 5-19 Brake pedal check...... 8-18 Side (See supplemental side air bag Anti-lock brake warning light...... 2-9 Parking brake check ...... 5-13, 8-18 system) ...... 1-16 Appearance care Parking brake operation ...... 5-13 Exterior appearance care...... 7-2 Air bag warning labels ...... 1-19 System...... 5-18 Interior appearance care ...... 7-4 Air bag warning light...... 1-19, 2-8 Warning light ...... 2-8 Armrest ...... 1-9 Air cleaner housing filter...... 8-16 Break-in schedule ...... 5-15 Audible reminders...... 2-11 Air conditioner Bulb check/instrument panel ...... 2-7 Audio system ...... 4-12 Air conditioner operation ...... 4-3 Bulb replacement...... 8-23 Air conditioner service ...... 4-3, 4-11 Automatic Air conditioner specification label .... 4-3, 10-12 Automatic transmission fluid (ATF) ...... 8-10 Air conditioner system refrigerant and Driving with automatic transmission...... 5-8 C lubrication recommendations ...... 4-3 Transmission selector lever lock Heater and air conditioner controls...... 4-3 release...... 5-10 Capacities and recommended Servicing air conditioner...... 4-3 Avoiding collision and rollover ...... 5-3 fuel/lubricants...... 10-2 Air conditioning system refrigerant and lubricant Car phone ...... 4-25 Car phone or CB radio ...... 4-25 recommendations ...... 10-6 B Air flow charts ...... 4-6 Cargo (See vehicle loading information) ...... 2-25 Cargo net ...... 2-25 Alcohol, drugs and driving ...... 5-4 Battery...... 8-13 Cassette player (See audio system) ...... 4-16 AM-FM radio with cassette player...... 4-12 Battery saver system...... 2-17 Cassette tape operation ...... 4-12 AM-FM radio with cassette player and compact Battery replacement, (See multi-remote control disc player...... 4-12 system) ...... 3-8 Catalytic converter, Three way catalyst...... 5-3 AM-FM radio with compact disc player ...... 4-12 Before starting the engine ...... 5-7 CD care and cleaning...... 4-24 Ambient temperature switch (AMB), Air Belts (See drive belts) ...... 8-15 Child restraints...... 1-28 conditioner ...... 4-11 Installation on front passenger seat...... 1-37 Precautions on child restraints...... 1-28

੬ 00.1.17/A33-D/V5.0 ੭ Top tether strap anchor point locations .... 1-36 Engine oil and oil filter recommendation... 10-5 D With top tether strap...... 1-36 Engine oil viscosity...... 10-5 Child safety ...... 1-23 Engine serial number ...... 10-11 Daytime running light system ...... 2-18 Child safety rear door lock...... 3-4 Engine specifications...... 10-7 Chimes...... 2-11 Defogger switch, Rear window and outside mirror defogger switch...... 2-15 If your engine overheats ...... 6-10 Circuit breaker, Fusible link ...... 8-21 Dimensions and weights...... 10-9 Starting the engine ...... 5-7 Cleaning exterior and interior...... 7-2, 7-4 Exhaust gas (Carbon monoxide)...... 5-2 Clock ...... 2-29 Door open warning light ...... 2-8 Clutch Drive belts...... 8-15 Clutch pedal ...... 8-19 Driving F Fluid...... 8-12 Cold weather driving ...... 5-21 Cold weather driving...... 5-21 Driving with automatic transmission...... 5-8 F.M.V.S.S. certification label...... 10-11 Compact Disc (CD) player (See audio Driving with manual transmission ...... 5-11 Filter, Air cleaner housing filter...... 8-16 system) ...... 4-22 Precautions when starting and driving...... 5-2 Flashers (See hazard warning flasher Compact disc (CD) player operation ...... 4-12 switch)...... 2-19 Compact spare tire ...... 8-33 Flat tire...... 6-2 E Console box...... 2-25 Floor mat cleaning ...... 7-4 Controls Fluid Economy, Fuel...... 5-16 Audio controls...... 4-12 Automatic transmission fluid (ATF) ...... 8-10 Emission control information label...... 10-11 Audio controls (rear)...... 4-12 Brake and clutch fluid...... 8-12 Emission control system warranty...... 10-20 Audio controls (steering wheel)...... 4-12 Capacities and recommended fuel/ Engine lubricants ...... 10-2 Heater and air conditioner controls...... 4-3 Before starting the engine...... 5-7 Engine coolant...... 8-5 Heater and semiautomatic air Block heater ...... 5-22 conditioner ...... 4-3 Engine oil...... 8-7 Capacities and recommended fuel/ Coolant Power steering fluid...... 8-11 lubricants ...... 10-2 Capacities and recommended fuel/ Window washer fluid ...... 8-12 Changing engine coolant ...... 8-6 lubricants ...... 10-2 Folding rear seat...... 1-6 Changing engine oil ...... 8-8 Changing engine coolant ...... 8-6 Front air bag system (See supplemental restraint Changing engine oil filter ...... 8-9 Checking engine coolant level ...... 8-5 system) ...... 1-14 Checking engine coolant level ...... 8-5 Corrosion protection ...... 7-5 Front manual seat adjustment...... 1-2 Checking engine oil level ...... 8-7 Cruise control...... 5-13 Front power seat adjustment...... 1-4 Coolant temperature gauge ...... 2-5 Cup holder ...... 2-23 Fuel Engine compartment check locations ...... 8-4 Capacities and recommended fuel/ Engine cooling system ...... 8-5 lubricants ...... 10-2 Engine oil...... 8-7 Filler cap...... 3-12 11-2

੬ 00.1.17/A33-D/V5.0 ੭ Filler lid ...... 3-12 Headlight switch ...... 2-16 J Filler lid and cap...... 3-12 Heated seats...... 2-20 Filler lid opener lever...... 3-12 Heater Jump starting ...... 6-7 Fuel economy...... 5-16 Engine coolant heater ...... 5-22 Fuel octane rating ...... 10-3 Heater and air conditioner controls...... 4-3 Fuel recommendation...... 10-3 Heater operation...... 4-3 K Gauge...... 2-5 Heater operation, Semiautomatic air conditioner ...... 4-4 Fuses ...... 8-20 Keyless entry, (See multi-remote control HomeLink Universal Transceiver...... 2-32 system) ...... 3-4 Fusible links ...... 8-21 Hood, release ...... 3-9 Keys ...... 3-2 Horn ...... 2-19 How to stop alarm, Vehicle security G L system...... 2-13 Garage door opener, Integrated HomeLink Label, Air conditioner specification label ...... 10-12 Universal Transceiver ...... 2-32 I Label, Emission control information label..... 10-11 Gas cap ...... 3-12 Label, F.M.V.S.S. certification label...... 10-11 Gauge ...... 2-3 Ignition switch ...... 5-4 Labels Engine coolant temperature gauge...... 2-5 Automatic transmission models ...... 5-4 Air bag warning labels...... 1-19 Fuel gauge ...... 2-5 Key positions ...... 5-6 Air conditioner specification label...... 4-3 Odometer...... 2-4 Manual transmission models...... 5-5 Engine serial number ...... 10-11 Speedometer ...... 2-4 Immobilizer system ...... 2-13 Vehicle identification number (VIN)...... 10-10 Tachometer ...... 2-4 Indicator lights and chimes (See warning/indicator License plate, Installing front license plate... 10-13 General maintenance ...... 9-2, 9-3 lights and chimes)...... 2-9 Light Glasses case ...... 2-23 Inside mirror...... 3-14 Air bag warning light ...... 1-19 Glove box...... 2-24 Inspection/maintenance (I/M) test...... 10-21 Bulb replacement ...... 8-23 Glove box lock ...... 2-24 Instrument panel ...... 2-2 Headlamps (Bulb replacement)...... 8-24 Integrated HomeLink Universal Headlight switch ...... 2-16 Transceiver ...... 2-32 H Headlights (Bulb replacement)...... 8-24 Interior and cargo light...... 2-29 Interior and cargo light ...... 2-29 Hazard warning flasher switch...... 2-19 Interior light ...... 2-29 Interior light...... 2-29 Head restraints ...... 1-7 Interior light replacement ...... 8-25 Personal light...... 2-30 Headlamps, (Bulb replacement) ...... 8-24 Replacement ...... 8-23 Headlights Trunk light...... 2-32 (Bulb replacement) ...... 8-24 Vanity mirror light ...... 2-31 11-3

੬ 00.1.17/A33-D/V5.0 ੭ Warning/indicator lights and chimes.... 2-7, 2-9 Periodic maintenance schedules...... 9-5 N Lights, Exterior and interior light Personal light ...... 2-30 replacement ...... 8-25 Power Net, Cargo net ...... 2-25 Loading information (See vehicle loading Front seat adjustment ...... 1-4 information) ...... 10-14 New vehicle break-in ...... 5-15 Power door lock ...... 3-3 Lock Nissan Vehicle immobilizer system ...... 2-12 Power outlet ...... 2-21 Door locks ...... 3-3 Nissan Vehicle Immobilizer System, Engine Power steering fluid...... 8-11 Glove box lock...... 2-24 start ...... 5-6 Power steering system...... 5-18 Power door lock ...... 3-3 Power windows ...... 2-26 Trunk lid lock opener lever...... 3-10 O Pre-tensioner seat belt system...... 1-17 Low fuel warning light...... 2-9 Precautions Odometer ...... 2-4 Braking precautions...... 5-18 M Oil Cruise control precautions ...... 5-14 Capacities and recommended fuel/ Maintenance precautions ...... 8-2 lubricants ...... 10-2 Maintenance On child restraints ...... 1-28 Changing engine oil ...... 8-8 Battery ...... 8-13 On seat belt usage...... 1-21 Changing engine oil filter ...... 8-9 Explanation of maintenance items..... 9-3, 9-10 On supplemental restraint system ...... 1-9 Checking engine oil level ...... 8-7 General maintenance...... 9-2, 9-3 Precautions when starting and driving...... 5-2 Engine oil...... 8-7 Inside the vehicle ...... 9-2, 9-3 Push starting...... 6-9 Maintenance precautions ...... 8-2 Engine oil viscosity...... 10-5 Outside the vehicle ...... 9-2, 9-3 Outside mirror ...... 3-15 Periodic maintenance schedules ...... 9-5 Outside mirror control ...... 3-15 R Seat belt maintenance ...... 1-27 Outside mirrors ...... 3-15 Radio, Car phone or CB radio...... 4-25 Manual front seat adjustment ...... 1-2 Overdrive switch ...... 5-10 Readiness for inspection/maintenance (I/M) test Meters and gauges...... 2-3 Overheat, If your vehicle overheats...... 6-10 (US only)...... 10-21 Mirror Rear door lock, Child safety rear door lock...... 3-4 Inside mirror ...... 3-14 P Rear power point ...... 2-21 Outside mirror...... 3-15 Rear window and outside mirror defogger Outside mirror control...... 3-15 Parking switch ...... 2-15 Outside mirrors...... 3-15 Brake check...... 8-18 Registering your vehicle in another Multi-remote control system...... 3-4 Parking brake check...... 5-13 country ...... 10-10 Parking brake operation ...... 5-13 Remote keyless entry, (See multi-remote control Parking on hills...... 5-13 system) ...... 3-4 Parking/parking on hills ...... 5-17 Reporting safety defects (US only)...... 10-20 11-4

੬ 00.1.17/A33-D/V5.0 ੭ Rollover...... 5-3 Shifting Ignition switch automatic transmission Automatic transmission ...... 5-8 models ...... 5-4 Ignition switch manual transmission S Manual transmission ...... 5-11 Shoulder belt height adjustment, For front models ...... 5-5 Safety seats ...... 1-27 Overdrive switch...... 5-10 Child seat belts...... 1-23 Side air bag system (See supplemental side air Power door lock switch ...... 3-4 Reporting safety defects (US only) ...... 10-20 bag system) ...... 1-16 Rear window and outside mirror defogger Towing safety ...... 10-17 Spark plugs...... 8-15 switch...... 2-15 Seat Speedometer ...... 2-4 Traction control system cancel switch ...... 2-21 Belt extenders ...... 1-27 Starting Turn signal switch ...... 2-18 Belt maintenance...... 1-28 Before starting the engine...... 5-7 Belt warning light...... 1-21 Jump starting...... 6-7 T Belt warning light and chime...... 2-8 Precautions when starting and driving...... 5-2 Seat adjustment Push starting ...... 6-9 Tachometer...... 2-4 Front manual seat adjustment ...... 1-2 Starting the engine ...... 5-7 Temperature gauge, Engine coolant temperature Front power seat adjustment ...... 1-4 Steering gauge ...... 2-5 Seat belt(s) Power steering fluid...... 8-11 Theft (Nissan Vehicle Immobilizer System), Engine start...... 2-13 Child safety...... 1-23 Power steering system...... 5-18 Three way catalyst...... 5-3 Infants and small children ...... 1-23 Tilting steering wheel ...... 3-13 Injured persons...... 1-24 Tilting steering wheel...... 3-13 Storage ...... 2-22 Larger children ...... 1-24 Tire Sun shade...... 2-28 Pre-tensioner seat belt system ...... 1-17 Flat tire ...... 6-2 Sun visors ...... 3-14 Precautions on seat belt usage ...... 1-21 Uniform tire quality grading ...... 10-19 Supplemental air bag warning labels ...... 1-19 Pregnant women ...... 1-24 Tires Seat belt cleaning...... 7-5 Supplemental air bag warning light...... 1-19, 2-8 Spare tire...... 8-35 Seat belts ...... 1-21 Supplemental front air bag system...... 1-14 Tire chains...... 8-33 Three-point type with retractor ...... 1-24 Supplemental restraint system ...... 1-9 Tire placard ...... 10-12 Seat(s), Seats ...... 1-2 Precautions on supplemental restraint Tire pressure ...... 8-30 Seats, Heated seats ...... 2-20 system ...... 1-9 Tire rotation ...... 8-32 Security system (Nissan Vehicle Immobilizer Supplemental side air bag system ...... 1-16 Type of tires ...... 8-30 System), Engine start ...... 2-13 Switch Top tether strap child restraints...... 1-36 Security systems (See theft warning)...... 2-12 Hazard warning flasher switch ...... 2-19 Towing Servicing air conditioner...... 4-3, 4-11 Headlight switch ...... 2-16 Tow truck towing ...... 6-11 Shift lock release ...... 5-10 Ignition switch...... 5-4 Towing a trailer...... 10-15 11-5

੬ 00.1.17/A33-D/V5.0 ੭ Towing load/specification chart ...... 10-15 Identification number (VIN) ...... 10-10 Towing safety ...... 10-17 Loading information...... 10-14 Traction control system ...... 5-20 Vehicle recovery, (freeing a stuck vehicle)..... 6-12 Traction control system (TCS) cancel Ventilators ...... 4-2 switch ...... 2-21 Trailer towing ...... 10-15 W Transceiver, Integrated HomeLink Universal Transceiver ...... 2-32 Warning, Hazard warning flasher switch...... 2-19 Transmission Warning labels, Air bag warning labels...... 1-19 Automatic transmission fluid (ATF) ...... 8-10 Warning light Driving with automatic transmission...... 5-8 Air bag warning light ...... 1-19, 2-8 Driving with manual transmission ...... 5-11 Brake warning light...... 2-8 Transmission selector lever lock Door open...... 2-8 release...... 5-10 Low fuel warning light ...... 2-9 Transmitter (See multi-remote control Seat belt warning light and chime...... 2-8 system) ...... 3-4 Warning/indicator lights and chimes...... 2-7 Traveling or registering your vehicle in another country ...... 10-10 Warranty, Emission control system warranty ...... 10-20 Trunk Washer switch, Windshield wiper and washer Access through rear seat ...... 1-6 switch ...... 2-14 Lid lock opener lever...... 3-10 Washing ...... 7-2 Light...... 2-32 Waxing ...... 7-2 Turn signal switch...... 2-18 Weights (See dimensions and weights) ...... 10-9 Wheels and tires, Cleaning aluminum alloy U wheels...... 7-4 Window washer fluid...... 8-12 Underbody cleaning...... 7-3 Window(s) Uniform tire quality grading...... 10-19 Cleaning ...... 7-3 Power windows ...... 2-26 V Windshield wiper and washer switch...... 2-14 Wiper Vanity mirror light...... 2-31 Blades...... 8-17 Vehicle Windshield wiper and washer switch ...... 2-14 Dimensions and weights ...... 10-9 11-6

੬ 00.1.17/A33-D/V5.0 ੭ GAS STATION INFORMATION

FUEL RECOMMENDATION: ENGINE OIL RECOMMENDATION: Unleaded premium gasoline with an octane ¼ API Certification Mark rating of at least 91 AKI (Anti-Knock Index) ¼ number (Research octane number 96). API grade SG/SH, Energy Conserving II or API grade SJ, Energy Conserving If unleaded premium gasoline is not avail- ¼ able, unleaded regular gasoline with an ILSAC grade GF-II octane rating of at least 87 AKI (Research ¼ SAE 5W-30 viscosity oil is preferred for all octane number 91) can be used. ambient temperatures. SAE 10W-30 vis- However, for maximum vehicle perfor- cosity oil may be used for ambient tempera- mance, the use of unleaded premium gaso- tures above 0°F (−18°C). line is recommended. See “Capacities and recommended fuel/ lubricants” in the “10. Technical and consumer CAUTION information” section for engine oil and oil filter recommendation. Using a fuel other than that specified COLD TIRE PRESSURES: could adversely affect the emission con- trol systems, and may also affect war- See tire placard affixed to the center console ranty coverage. lid. Under no circumstances should a NEW VEHICLE BREAK-IN leaded gasoline be used, since this will PROCEDURES damage the three way catalyst. RECOMMENDATION: During the first 1,000 miles (1,600 km) of For additional information, see “Capacities and vehicle use, follow the recommendations out- recommended fuel/lubricants” in the “10. lined in the “Break-in schedule” Information Technical and consumer information” section. found in the “5. Starting and driving” section of this Owner’s Manual. Follow these recommen- dations for the future reliability and economy of your new vehicle.

੬ 00.1.17/A33-D/V5.0 ੭ Windshield washer fluid 8-12

Engine coolant 8-5

Meters and gauges 2-3

Engine oil 8-7 Hood release 3-9

Seat 1-2 Trunk release 3-10

Seat belt 1-21 Audio system 4-12 Air conditioner 4-3

Key 3-2

Fuel 3-12, 10-2 Spare tire 6-3, 8-33

STI0205

੬ 00.1.17/A33-D/V5.0 ੭