DOCSLIB.ORG

Abrasives21 Abrasives

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Abrasives21 Abrasives 215587 Pages 20-29 7/21/03 2:44 PM Page 20 3M™ Green Corps™ Flexible Grinding Wheel 3M™ Green Corps™ Cut-Off Wheels 3M™ Green Corps™ Depressed Center Wheel Bonded abrasive wheel designed for right angle tools. Green Corps cut-off wheels incorporate 3M’s patented Type 27 (Quick Change) (3M Cubitron Abrasive Grain) ™ 3M™ Cubitron™ Abrasive Grain provides a fast cut and a Cubitron Abrasive Grain, an advanced ceramic aluminum Bonded abrasive wheel provides a high rate of stock smooth finish on a variety of workpieces, eliminating oxide mineral. They provide high cut rates and long life removal and long life. several process steps. Do not use on tools without guards. on most material, including fiberglass, stainless steel, and mild steel. Do not use on tools without guards. UPC Dia. x Thk x AH Grade Min./Case UPC Dia. x Thk x AH Grade Min./Case 051111-55960-4 4-1/2" x 1/4" x 5/8"–11 24 10/60 051111-50440-6 4-1/2" x 1/8" x 7/8" 36 20/200 051111-55961-1 Max RPM 13,300 36 10/60 UPC Dia. x W x AH Min./Case 051111-50442-0 Type 27 46 20/200 051111-55958-1 7" x 1/4" x 5/8"–11 24 10/20 051111-50443-7 Max RPM 13,300 60 20/200 051144-83487-7 2" x 1/16" x 1/4" 50/50 051111-55959-8 Max RPM 8,600 36 10/20 051111-50444-4 80 20/200 Max RPM 42,000 051111-55956-7 9" x 1/4" x 5/8"–11 24 10/20 051111-50445-1 7" x 1/8" x 7/8" 36 20/100 051111-55957-4 Max RPM 6,600 36 10/20 051111-50446-8 Type 27 46 20/100 051144-82238-6 3" x 1/32" x 1/4" 50/50 051111-50447-5 Max RPM 8,600 60 20/100 Max RPM 35,000 051111-50448-2 80 20/100 051131-01989-8 3" x 1/32" x 3/8" 5 wheels per pack Max RPM 35,000 10 packs per case 41 051131-01985-0 50/50 051131-01990-4 3" x 1/16" x 3/8" 5 wheels per pack 3M™ Green Corps™ Flexible Grinding Wheel Max RPM 28,000 10 packs per case 051131-01986-7 50/50 (Quick Change) Threaded for easy disc changes. No additional backup 051144-83488-4 4" x 1/16" x 3/8" 50/50 Max RPM 21,000 pad required. Do not use on tools without guards. 051144-88755-2 4" x 1/32" x 1/4" 50/50 Max RPM 26,250 UPC Dia. x Thk x AH Grade Min./Case 051131-01994-2 4" x 1/32" x 3/8" 50/50 43 051111-51164-0 4-1/2" x 1/8" x 5/8"–11 36 10/100 Max RPM 26,250 051111-51161-9 Type 27 46 10/100 051111-51160-2 Max RPM 13,300 60 10/100 1/ 5/ ™ ™ 051111-51163-3 7" x 8" x 8"–11 36 10/40 42 3M Green Corps Depressed Center Wheel 051111-51162-6 Type 27 46 10/40 051111-51159-6 Max RPM 8,600 60 10/40 (Type 27 - 7.8" Center Hole) UPC Dia. x Thk x AH Grade Min./Case ACCESSORIES 051111-55991-8 4-1/2" x 1/4" x 7/8" 24 10/60 051111-55992-5 Max RPM 13,300 36 10/60 Flexible Grinding Wheel Backup Pad 051111-55989-5 7" x 1/4" x 7/8" 24 10/20 051111-55990-1 Max RPM 8,600 36 10/20 Backup pad is required for safe operation of Flexible 051111-55987-1 9" x 1/4" x 7/8" 24 10/20 Grinding Wheels with 7/8" center hole. 051111-55988-8 Max RPM 6,600 36 10/20 UPC Dia. x AH Min./Case 44 051111-51046-9 3-3/8" x 7/8" 5/100 Use with 4-1/2" only 051111-51045-2 4-5/8" x 7/8" 5/100 Sculptors Knife and Gun Golf Club Repair Use with 7" only Sculptors 20 Abrasives Abrasives 21 215587 Pages 20-29 7/21/03 2:45 PM Page 22 3M™ Flap Disc 747D WELDING (3M Cubitron™ Abrasive Grain – Type 27) ACCESSORIES Premium ceramic mineral provides exceptional cut rate and longer life on the hardest metals. 3M™ Weld-Thru Coating • An aerosol coating designed to be UPC Dia. x Ctr Hole Grade Min./Case applied to metal surfaces prior to 051111-49613-8 36 10 welding which permits corrosion 051111-49614-5 4-1/2" x 7/8" 50 10 051111-49615-2 Max RPM 13,300 60 10 protection after the weld. 45 051111-49616-9 80 10 • Dries fast (10-15 minutes). 051111-49617-6 P120 10 051111-49608-4 36 5 • Minimizes MIG weld spatter. 051111-49609-1 7" x 7/8" 50 5 • May be applied after the weld for 49 051111-49610-7 Max RPM 8,600 60 5 051111-49611-4 80 5 additional corrosion protection. 47 ™ ™ 051111-49612-1 P120 5 3M Green Corps Reinforced Weld UPC Container/Size Cans/Case Grinding Wheel 051131-05913-9 16 oz. Aerosol 12 3M™ Flap Disc 563D • Ideal for cutting spot welds and grinding in hard-to- (Aluminum Zirconia – Type 29) reach places. CAUTION: Read all warnings supplied with wheels. Do not use on Fast cutting disc with exceptionally long life. tool without guards. Works great on a wide variety of metals. UPC Size Wheels/Pack Packs/Case UPC Dia. x Ctr Hole Grade Min./Case 051131-01991-1 3" x 3/16" x 3/8" 5 10 051111-50467-3 P36 10 051111-50468-0 4-1/2" x 7/8" P40 10 051111-50469-7 Max RPM 13,300 P60 10 051111-50470-3 P80 10 051111-50471-0 P120 10 051111-50472-7 P36 5 051111-50473-4 7" x 7/8" P40 5 051111-50474-1 Max RPM 8,600 P60 051111-50475-8 P80 5 051111-50476-5 P120 5 48 46 ™ 3M™ Flap Disc 563D 3M High Performance Welding Drape (Quick Change) • Resists penetration by MIG weld spatter or ACCESSORIES grinding sparks. Aluminum Zirconia – Type 29 threaded for easy disc changes. Flap Disc /Grinding Wheel Adapter Nut • Lightweight, drapable material. UPC Dia. x Ctr Hole Grade Min./Case Adapter nut used for securing 4-1/2" diameter flap discs UPC Size Drapes/Case 051111-50769-8 P36 10 or 4-1/2" and 7" flexible grinding wheels to right angle 051131-05919-1 57" x 80" 1 051111-50770-4 4-1/2" x 5/8" –11 P40 10 50 051111-50771-1 Max RPM 13,300 P60 10 tool with a 5/8" –11 threaded shaft. 051111-50772-8 P80 10 3M™ Welding and Spark Deflection Paper 3M™ Welding and Spark Deflection Dispenser 051111-50773-5 P120 10 UPC Thread Size Min./Case 051111-50774-2 P36 5 051144-88765-1 5/8" –11 1 Pair/5 Pair 051111-50775-9 7" x 5/8" –11 P40 5 • Flame retardant. • Dispenses single rolls of 24" 3M Welding and Spark 051111-50776-6 Max RPM 8,600 P60 5 • Repositionable adhesive on one side. Deflection Paper. 051111-50777-3 P80 5 Flap Disc Holder 051111-50778-0 P120 5 • Formulated to protect vertical surfaces, glass and paint • Can be wall or table mounted. May use Disc Holder Adapter No. 9 on page 19. Backup plate for 7" diameter type 27 flap discs. from welding spatter and grinding sparks. • Very easy to assemble. Sculptors • Easy to use roll form. UPC Thread Size Min./Case UPC Dispensers/Case 051144-88769-9 4" x 5/8" –11 1 UPC Roll/Size Rolls/Case 051131-05912-2 1 051131-05916-0 24" x 150' 2 22 Abrasives Abrasives 23 215587 Pages 20-29 7/21/03 2:45 PM Page 24 3M™ Wetordry™ Polishing Paper Sheets 3M™ Wetordry™ Sheets Superflexible non-woven backing allows easy polishing 3M Wetordry sheets provide finer finishes than tradition- of flat and contoured surfaces of softer materials. al emery papers. The new backing and coating have Precision micron graded silicon carbide (481Q) or enhanced cut rates while providing improved finishes. aluminum oxide (281Q) mineral provides a uniform Their durability increases product life over traditional finish. Use wet or dry. emery papers. 481Q Sheets – Silicon Carbide 431Q 281Q Sheets – Aluminum Oxide • Silicon carbide — C wt. Paper. Min./ • Heavyweight paper backing for increased UPC Size Color Grade Case 051111-49899-6 2-3/4" x 9 Green 30 Micron 50/500 durability. 051111-49900-9 481Q Grey 15 Micron 50/500 051111-49901-6 2-3/4" x 9 Blue 9 Micron 50/500 51 413Q 051111-49902-3 281Q Pink 3 Micron 50/500 051144-14373-3 8-1/2" x 11" Green 30 Micron 50/200 • Silicon carbide — A wt. Paper. 149 051111-50355-3 481Q Grey 15 Micron 50/200 ACCESSORIES • Excellent conformability. 051144-81330-8 8-1/2" x 11" Blue 9 Micron 50/200 3M™ 011K Emery Cloth Sheets 051144-81329-2 281Q Pink 3 Micron 50/200 ™ ™ 3M Hookit II Disc Pads UPC List W x L Grade Min./Case 051111-50075-0 Pale Blue 2 Micron 50/200 These high-quality emery cloth sheets are recognized for 051111-50074-3 Mint 1 Micron 50/200 051144-02018-8 9" x 11" 80 50/250 General purpose, 5" back-up pad for use with 3M’s patent- 051144-02017-1 431Q 100 50/250 their superior durability, fast cutting and smooth finishes.
Load more

Recommended publications
  • Appendix D – Machining Guidelines
    Appendix D – Machining Guidelines A. Holding and Chucking When holding any composite billet or part it is important to remember that, unlike metallic materials, polymers will deform/distort under excessive holding pressures. This is very important when machining parts/billets with a thin cross-section (0.250 in / 6.35 mm or under) and for finish machining. Parts/billets that are held too tightly may spring back after release from the holding mechanism and result in parts that are not concentric and/or undesirable dimensions. 1. Standard Jaw Chucking Four or six jaw chucks are acceptable for thick cross-section parts and billets. Ensure medium chucking jaw pressure to prevent material distortion. 2. Pie Jaw Chucking Pie jaw chucking, contacting as close to 90% of the OD as possible, is a superior holding method over standard jaw chucking. This works well for any operation and is preferred over standard chucking for finish machine operations. 3. Adhesive Bonding / Gluing As an alternate to standard chucking directly to the composite, a billet can be glued to a fixture of alternate material prior to machining operations. If this method is used, it is recommended that guidelines from the adhesive manufacturer be followed to ensure sufficient quantity and coverage. Both Loctite® 4090 and 3MTM Scotch-WeldTM Acrylic Adhesive 8405NS have been successfully used. 4. Holding Fixtures Use holding fixtures to grip composite components during finish machining operations. Holding fixtures shall contact 100%of either the OD or ID and should be a snug fit (in/out by hand). PTFE is the best material of construction for fixtures with PVC being a close (slightly more rigid) second choice.
    [Show full text]
  • Tool Care and Sharpening.Ppt [Read-Only]
    Tool Care And Sharpening Bill Boytim The Sharpening Philosophy “Sharpen while the tool is still sharp, not to recover sharpness” Type of Cutting Edges Determining if Edge is Sharp Concepts for Sharpening Concepts for Sharpening Concepts for Sharpening Abrasive Types • Synthetic • Garnet • Aluminum Oxide • Arkansas Stones • Silicone Carbide • Ceramic • Diamond Abrasives Remove Material and Leave Gouge Marks Abrasive Size • The larger the number the finer the particle • U. S. Grit 100 = Japanese Grit 150 • U. S. Grit 180 = Japanese Grit 240 • U. S. Grit 320 = Japanese Grit 500 • U. S. Grit 900 = Japanese Grit 4000 • U. S. Grit 1000 – 1200 Finest = Japanese Grit 6000 Finest • Larger the number the higher the polish Tools for Sharpening File Hand shield made of cardboard Can also use leather or thick rubber. Keeps your hand from contacting the sharp edge Tools for Sharpening Jewelry File Tools for Sharpening Chain Saw File Concepts for Sharpening Before Filing After Tools for Sharpening Power Belt Sander Concepts for Sharpening Belt Sander and Chipper Blade Concepts for Sharpening Belt Sander and Chipper Blade Tools for Sharpening Hand Held Grinder Tools for Sharpening Hand Held Grinder Tools for Sharpening Hand Held Grinder Tools for Sharpening Wet or Dry Grinder Wet wheel, 180 RPM, note revolution is away from you Dry wheel, 3500 RPM, 6 inch diameter wheel velocity is approximately 60 MPH. If it was 8 inch diameter, velocity would be 80 MPH A wheel speed of approx. 1000 RPM would be better Tools for Sharpening Wet or Dry Grinder Tongue guard
    [Show full text]
  • Fall 2016 Kmt Waterjet Parts Catalog
    KMT WATERJET PARTS CATALOG FALL 2016 Over 40 years ago the very first commercial installation of a waterjet cutting system began operation using a KMT intensifier. Since then, KMT pumps with KMT Genuine Parts have served customers reliably across many industries, including yours. KMT Genuine Parts are manufactured in the USA to the exact standards as the original parts found on new KMT pumps. Our expertise and operating experience extends from the original SL-I operating at 3,800 bar all the way to today’s industry-leading KMT PRO pumps cutting at 6,200 bar. No other provider has this breadth of experience and you can rest assured that your KMT pump will operate at peak performance when you use KMT Genuine Parts. Benefits of KMT Genuine Parts: • Robust quality control inspection process to ensure superior fit and durability • Manufactured to precise specifications best suited for your KMT pump • Improvements made to KMT pumps are incorporated into KMT Genuine Parts • KMT Customer Service and Technical Support is available 24/7 Remember to use KMT Genuine Parts to maintain your pump warranty and ensure that your investment pays off over the long-term. The use of imitation parts will void warranty coverage, compromises safety and may result in reduced component lifetime. Decades of precision manufacturing and engineering experience, proprietary manufacturing processes and patented technology make KMT Genuine Parts an exceptional value – your business is worth it. 2 Contents Topworks Parts 5 Seal Assemblies 7 Abrasive Feed Tube Assembly 35
    [Show full text]
  • PM Work Order ID: 537 Completion Date
    Brandon Starr Test Account Page 1 of 4 Date Created: 9/15/2016 12:01AM Printed on: 9/16/2016 PM Work Order ID: 537 Completion Date: Description Monthly - (GSA) LEE - AHU - Inspection - Monthly - Refer to PM schedule details. Lee County Senior High Location Building Area Priority Medium Heating/Ventilation /Air Area Number Craft Conditioning Brandons top Type AHU list Status New Request Estimated Hour 0.00 Brandon Starr Assigned To Ryan, Kennedy Requester Estimated Start 9/15/2016 Request Date 9/15/2016 Est. Completion Req. Completion Date Date Budget Code Purpose Code Preventive Maintenance Project Code Project Description Equip Item No. Equip Desc Notes Purchases To Date: $0.00 Date Inv/Ref Description Supplier Pool Qty Cost Each Labor To Date: h Date Name Hours Technician Name Date Confirmation Date www.schooldude.com MaintenanceDirect Printed by Brandon Starr Brandon Starr Test Account Page 2 of 4 Date Created: 9/15/2016 12:01AM Printed on: 9/16/2016 PM Work Order ID: 537 Completion Date: Tools Tools Group A 1. Standard and Phillips head screw drivers-various sizes. 2. Pliers-vise grip (2), slipjoint, needlenose, diagonal, cutting pliers, side cutters. 3. Ball peen hammer. 4. Hack saw and spare blades. 5. 3/8' drive socket set and ratchet. 6. Small set of Allen wrenches. 7. Assorted center punches, drift punches, and steel chisel. 8. 12' measuring tape. 9. Crescent wrenches 4' to 8'. 10. Open and box end wrenches ¼' to¾'. 11. File. 12. Pipe wrenches to 14'. 13. Small level and square. 14. Pocket knife. 15. Flashlights. 16.
    [Show full text]
  • Abrasives & Cutting Tools
    Abrasives & Cutting Tools SAINT-GOBAIN ABRASIVES SAINT-GOBAIN ABRASIVES Sandpaper Sheets Sandpaper Sheets 9" x 11" Wet and Dry 9” X 11” Sheets Tufbak® T461 Garnet These sheets are designed for wet These 9”x11” Garnet sandpaper sanding applications where tear resis- sheets are excellent for soft woods, tance is a significant consideration. consistent finishes. Designed for • Sharp, brittle silicon carbide abra- light to heavy duty hand and machine sive sanding, coarse to fine. • Water proof paper backing • A511: These sheets are especially • Best finish in wet applications suited for dry finishing applications on wood surfaces where loading is • Grit sizes range from 80-X to 600-X not a problem but conformability • Packaging: 50 per box and consistent finish are of prime concern. The open-coated Garnet Mfg Part# Grit Unit Petter# Price abrasive on a light A-weight paper 66261101170 80 EA126962 $1.99 backing provides balanced perfor- mance 66261101165 100 EA155711 1.73 • A513: These sheets extend the same performance features as Gar- 66261101160 120 EA126961 1.50 net A514 paper sheets to medium grit sizes for intermediate wood 66261101155 150 EA 126960 .93 sanding applications. The open-coated Garnet abrasive on C-weight 66261101150 180 EA 126959 1.33 paper backing yields excellent sanding results 66261139360 600 EA 127102 .72 • A514: These sheets are designed for dry sanding applications where resistance to tearing is crucial but loading and conformability are not important. The specially-treated open-coated Garnet abrasive on D- SAINT-GOBAIN ABRASIVES weight paper backing provides soft, consistent sanding action and long life Sandpaper Sheets Mfg Part# Grit Package Size Unit Petter# Price 9" x 11" Waterproof Black Ice T402 Garnet A511 Black Ice T402 waterproof sheets 66261101505 80 50 EA 126966 $.68 provide the ultimate finish in wet 66261101495 120 50 EA 152935 .62 applications with ultimate flexibility.
    [Show full text]
  • Step by Step Instructions for Kits with Pinned Handles
    AND PROPERLY CENTERED FOR PINS TO FIT STEP BY STEP INSTRUCTIONS CORRECTLY. FOR KITS WITH PINNED 11. INSERT PINS THROUGH HOLES DRILLED IN HANDLE MATERIAL. IT MAY BE NECESSARY TO HANDLES POLISH YOUR PINS AND THONG HOLE TUBING WITH EMERY CLOTH TO ASSURE THEY WILL SLIDE IN AND OUT OF THE HOLES EASILY. THEY MATERIALS TOOLS: SHOULD BE SNUG, BUT NOT TIGHT ENOUGH TO BLADE SCRIBE RISK CRACKING THE WOOD WHEN PUSHING IN HANDLE MATERIAL DRILL BITS & DRILL OR OUT. MASKING TAPE FILES 12. MIX A SMALL AMOUNT OF EPOXY. ROLL PINS PINS JEWELERS SAW IN EPOXY. INSERT PINS IN HOLES. ALLOW TO EPOXY VISE DRY UNTIL SET. EXCESS PIN MATERIAL WILL BE SANDPAPER (200-600 GRIT) BALL PEIN HAMMER SANDED OFF WHEN SHAPING AND BUFFING THE HANDLE. 1. SELECT MATERIALS AND TOOLS REQUIRED FOR 13. YOU ARE NOW READY TO SHAPE YOUR YOUR CUSTOM KNIFE. READ ALL INSTRUCTIONS HANDLE. POWER TOOLS SUCH AS BELT CAREFULLY BEFORE BEGINNING. SANDERS AND DREMEL TOOLS WITH SANDING 2. COVER SHARP EDGE OF BLADE WITH MASKING DRUMS AID GREATLY IN SPEEDING UP THE TAPE. THIS WILL PROTECT YOU AND THE BLADE. SHAPING AND ROUGHING WORK. HOWEVER, 3. MARK THE SIDE OF YOUR HANDLE MATERIAL FINAL HAND SHAPING AND SANDING THAT WILL FIT NEXT TO TANG BEING CAREFUL PRODUCE THE BEST RESULTS. USING A FILE, A TO MATCH ANY COLOR PATTERNS THAT YOUR HALF ROUND SECOND CUT WORKS GREAT, MATERIAL MAY CONTAIN. SHAPE YOUR HANDLE TO THE DESIRED SHAPE, 4. LAY BLADE ON HANDLE MATERIAL. SCRIBE FITTING YOUR HAND. SAND WITH OUTLINE OF BLADE ONTO HANDLE (YOU MAY SANDPAPERS, FINISHING WITH A 600 GRIT WET WISH TO CLAMP FIRST SO THE HANDLE WILL DRY.
    [Show full text]
  • Fabricating Two Piece Pen in This Unit You Will Fabricate a Two Piece Pen
    Fabricating Two Piece Pen In this unit you will fabricate a two piece pen from aluminum round bar using a metal lathe. Use the following steps to help you fabricate the pen to the dimensions indicated on the attached drawing. You will also be required to obtain a “Bic” style pen insert for pen. Machining process common to both pieces. 1. Cut two pieces of 5/8” aluminum bar stock to a length of 3” each using a hacksaw or horizontal bandsaw. 2. End face and centre drill all of the ends. 3. Attach one end of your work piece to the lathe chuck and support the other end with the tailstock. Parallel turn both pieces to a diameter of ½ inch (500 thou.) – Note: since a portion of your piece is going to be held by the lathe chuck, you will have to turn one end to ½” diameter, flip the piece in the machine and turn the other end. Make sure you center it carefully in order to have a uniform finish. Machining process of the bottom piece. 1. In order to avoid wobbling, mount your piece in the chuck as far in as you can with less than half of its length sticking out. Using a 5/32” drill bit, drill one end to the full depth of the bit – approximately 2” deep. Remember to clean the ybit ever ¼” – ½” drilling depth to avoid clogging it up with chips and causing it to break. 2. Flip the piece and drill the other end until the hole is all the way through.
    [Show full text]
  • Gap Catalog Text FINAL 8-11.Qxd:GAP Text 8/11/06 7:13 AM Page 1
    TABLE OF CONTENTS Belts Floor Sanding Peel-It PSA Discs Depressed Narrow ........................................1-4 Products A/O FilmBac Discs ........................56 Center Wheels Wide ............................................5, 6 Floor Sanding Discs ......................27 Red Premium A/O Discs................57 General Purpose - TP27 ................79 Belt Cleaning Sticks ........................6 Silicon Carbide Gold A/O Stearated Discs ..............58 General Purpose - TP27T ..............80 Mesh Discs....................................27 Gold A/O Stearated Discs E-Wt ....59 Aluminum - TP27, TP27T..............80 Floor Sanding Rolls ......................28 Resin Fiber Discs White S/C Stearated Discs ............60 Floor Sanding Sheets ....................28 Stainless - TP27, TP27T................81 Aluminum Oxide ..............................7 A/O Resin Cloth Discs ..................61 Floor Sanding Belts ......................29 Zirconia - TP27, TP27T..................81 Zirconia............................................7 Zirconia Resin Cloth Discs ............62 Concrete, Stone and Silicon Carbide ................................7 A/O Stearated Resin Masonry TP27, TP27T ..................82 Ceramic ..........................................7 Specialties Cloth Discs ....................................62 Cross Pads & Mandrels ................30 General Purpose TP28, TP28T ......82 Resin Fiber Pads, Nuts & A/O Heavy Duty Paper Wrenches ........................................8 Square Pads & Mandrels ..............31
    [Show full text]
  • Body Repair Abrazives
    BODY REPAIR Sandpaper-Hand Sanding • Suitable for hand or machine sanding ABRAZIVES - SANDPAPER - • Can be used on metal, plastic body filler and fiberglass • Contains a tough and versatile synthetic abrasive made with aluminum oxide mineral for perfect sanding HAND SANDING • Great for use with 3M Sanding Block (PN 03149 or 03148) 3M Aluminum Oxide Automotive Sandpaper, Fine, 3 2/3" x 9" MMM 03031 • Cloth backing makes it strong and durable • Excellent for rust removal or metal sanding • Range of abrasive grits for each step of auto body repair • Assorted Grits of Emery Cloth • Great for stripping paint to metal, featheredging around repair area and shaping/sanding body filler 3M Emery Cloth, 3 2/3" x 9", Assorted MMM 03008 • Aluminum oxide abrasive cuts fast, lasts a long time and resists loading • Light to heavy paper backing is suitable for machine or hand sanding • Resin bonded for heat resistance and added durability 3M Sandpaper, 180, 320, 40, 80, Assorted, P80 MMM 03037 • Works well for sanding old paint, primer and final coats • Excellent for sanding primers, sealers, plastic, lacquers and paints • Assorted Grits of Sandpaper - 320, 400, 600, 800 • 3 2/3" x 9" • Works well for sanding old paint, primer and final coats • Great when used with 3M Sanding Blocks (PN 03148 or • Excellent for sanding primers, sealers, plastic, lacquers and 03149) paints. • 400 grit sandpaper 3M Imperial Wetordry Sandpaper, 3 2/3" x 9", • 3 2/3" x 9" Assorted MMM 3024 • Great when used with 3M Sanding Blocks (PN 03148 or 03149) 3M Imperial Wetordry Automotive Sandpaper, 3 2/3" x 9" MMM 03018 • Perfect for clear coat sanding and defect removal.
    [Show full text]
  • Product Line Card 2021 Champion Cutting Tool Corp Acquires Mercer Industries
    ____________________ A Division Of Product Line Card 2021 Champion Cutting Tool Corp Acquires Mercer Industries October 19, 2020 Rockville Centre, NY - Champion Cutting Tool Corp, a 123 year old supplier of high performance metal and concrete cutting tools to the industrial market, is excited to share that we have acquired Mercer Industries, a leading supplier of coated and bonded abrasives. Mercer’s portfolio also includes carbide blades, diamond blades, industrial files, wire wheels, and safety products. Since 1968, Mercer’s commitment to supply the industrial market with high quality, cost-effective tools, has served as a foundation for their success. As a part of Champion Cutting Tool’s expansion, the acquisition of Mercer Industries will give Champion’s existing customers the convenience of purchasing from an even broader catalog of quality tools and a new offering of safety products. In addition, “Mercer customers will benefit from the many resources that Champion has to offer, including extremely dedicated and knowledgeable employees and some of the highest service levels in the industry. “I am looking forward to joining Team Champion as the Global Director of Sales- Abrasives Division” - Jim Wallick, Former President, Mercer Industries. Significant parallels exist between Champion and Mercer. Both companies are New York based, multi-generational family businesses, who value people and embrace family-like cultures. Mercer Industries’ namesake originates from Mercer Street in downtown New York City. Coincidentally, Champion’s headquarters once resided on Warren Street, just a few blocks away. “The synergies that exist between the two companies just make sense. We are enthusiastic to be able to offer even more value to our customers and professional tool users.
    [Show full text]
  • Gap Catalog Text 8-14.Qxd:GAP Text 8/15/06 7:28 AM Page Ii Gap Catalog Text FINAL 8-11.Qxd:GAP Text 8/11/06 7:13 AM Page 1
    Volume 3 Volume GLOBAL ABRASIVE PRODUCTS www.globalabrasiveproducts.com New York 378 Niagara Street 14094 Lockport, New York Manufacturing oducts.com gia 30004 th Drive etta, Geor ee: 800-763-7263 oll-Fr Georgia 1035 Nine Nor Alphar Fax: 770-740-0574 Phone: 770-740-0475 T The Future of The Future of .globalabrasivepr ork 14094 Durable Abrasive Products Durable Abrasive Products eet t, New Y ee: 800-283-0483 www oll-Fr Fax: 716-438-9931 Phone: 716-438-0047 T Lockpor New York 62 Mill Str Manufacturing & Sales GAP Covers 8/15/06 5:47 PM Page 1 GAP Covers 8/15/06 5:47 PM Page 2 Global Abrasive Products, Inc. is pleased to provide you with our new full-line catalog. GAP’s core values center on service, quality, competitiveness, and product breadth. As well, we have put together a talented team of technical sales people to provide you solutions to all your abrasive needs. GAP maintains a large inventory of both raw material and finished products allowing for just-in-time delivery on your abrasive orders. Our state-of-the-art equipment, lean manufacturing methods and continuous improvement programs are constantly striving to provide the best delivery in the industry. GAP’’s three converting plants produce sanding belts to 64" wide, nonwoven surface conditioning belts, adhesive backed and hook & loop discs, rolls and sheets. In addition, GAP produces a full line of specialties including cross pads, square pads, flap wheels, flap discs and many other finishing and polishing products. Our commitment to service is evident in the vast inventory of finished goods such as cut-off wheels, sticks and stones, fiber discs, shop rolls, floor sanding products and many other ready-to-ship abrasive items.
    [Show full text]
  • Catalog Product Offering
    2013 1.800.322.4321 We believe manufacturing in America is a cornerstone of our country’s strength. At Even Cut Abrasive our employees are our game changers. No one has our team’s years of experience or dedication to building you the very best products. We invest in America, the money we earn stays in America and we thank you for your continued support! MAKING AMERICA STRONG www.evencut.com CONTENTS ABRASIVE COMPANY Belts Non-Woven Products E Grind Belts - Aluminum Oxide, Clean and Finish Discs 38 Zirconia, Ceramic 20-21 E Strip Surface Cleaning Flap Discs – Carbide Burs Shanked mounted, Unmounted 36 Carbide Burs 18-19 Hand Pads and Discs 38 Shank Mounted Discs 39 Flap Discs Unmounted Unitized Wheels 40 Aluminum Oxide Flap Disc 4 Surface Conditioning Spiral Bands 36 E Grind Fusion 5 Surface Conditioning Stars and Discs 37 E Grind Maxx – Ceramic 5 E Grind Sharp – Silicon Carbide 5 Quick Change Discs We believe manufacturing E Strip Surface Cleaning Flap Discs 36 Aluminum Oxide 7 High Performance Zirconia Flap Discs 2 Ceramic 8 in America is a cornerstone Standard Zirconia Flap Disc 3 E Strip Cleaning Discs – Type R Only 36 Mini E Flap Discs 6 Flap Wheels Silicon Carbide 7 of our country’s strength. Aluminum Oxide Flap Wheels – 1/4 Shank 10 Surface Conditioning 6 Aluminum Oxide Flap Wheels – Zirconium Plus 8 1/8 and 1/4-20 Shanks 9 At Even Cut Abrasive our Ceramic Flap Wheels 10 Resin Fiber Discs Flap Brushes - Mounted and Unmounted 12 Aluminum Oxide, Zirconia, Silicon Carbide 13 Ceramic, Ceramic w/top coat 14 employees are our game Interleaf Flap Wheels 11 Silicon Carbide Flap Wheels 10 Sheets and Discs changers.
    [Show full text]