Body Repair Abrazives

Total Page:16

File Type:pdf, Size:1020Kb

Body Repair Abrazives BODY REPAIR Sandpaper-Hand Sanding • Suitable for hand or machine sanding ABRAZIVES - SANDPAPER - • Can be used on metal, plastic body filler and fiberglass • Contains a tough and versatile synthetic abrasive made with aluminum oxide mineral for perfect sanding HAND SANDING • Great for use with 3M Sanding Block (PN 03149 or 03148) 3M Aluminum Oxide Automotive Sandpaper, Fine, 3 2/3" x 9" MMM 03031 • Cloth backing makes it strong and durable • Excellent for rust removal or metal sanding • Range of abrasive grits for each step of auto body repair • Assorted Grits of Emery Cloth • Great for stripping paint to metal, featheredging around repair area and shaping/sanding body filler 3M Emery Cloth, 3 2/3" x 9", Assorted MMM 03008 • Aluminum oxide abrasive cuts fast, lasts a long time and resists loading • Light to heavy paper backing is suitable for machine or hand sanding • Resin bonded for heat resistance and added durability 3M Sandpaper, 180, 320, 40, 80, Assorted, P80 MMM 03037 • Works well for sanding old paint, primer and final coats • Excellent for sanding primers, sealers, plastic, lacquers and paints • Assorted Grits of Sandpaper - 320, 400, 600, 800 • 3 2/3" x 9" • Works well for sanding old paint, primer and final coats • Great when used with 3M Sanding Blocks (PN 03148 or • Excellent for sanding primers, sealers, plastic, lacquers and 03149) paints. • 400 grit sandpaper 3M Imperial Wetordry Sandpaper, 3 2/3" x 9", • 3 2/3" x 9" Assorted MMM 3024 • Great when used with 3M Sanding Blocks (PN 03148 or 03149) 3M Imperial Wetordry Automotive Sandpaper, 3 2/3" x 9" MMM 03018 • Perfect for clear coat sanding and defect removal. • Includes 1 sheet each of 1000 grit, 1500 grit, and 2500 grit and 2 sheets of 2000 grit. • Works well for sanding old paint, primer and final coats • Works well for sanding old paint, primer and final coats • Excellent for sanding primers, sealers, plastic, lacquers and • Excellent for sanding primers, sealers, plastic, lacquers and paints paints • 3 2/3" x 9" • 600 grit sandpaper • 3 2/3" x 9" 3M Wetordry Automotive Sandpaper, 3 2/3" x 9", • Great when used with 3M Sanding Blocks (PN 03148 or Assorted MMM 03006 03149) 3M Imperial Wetordry Sandpaper, 3 2/3" x 9" MMM 03020 • Suitable for hand or machine sanding • Can be used on metal, plastic body filler and fiberglass • Contains a tough and versatile synthetic abrasive made with • Works well for sanding old paint, primer and final coats aluminum oxide mineral for perfect sanding • Excellent for sanding primers, sealers, plastic, lacquers and • Great for use with 3M Sanding Block (PN 03149 or 03148) paints • 800 grit sandpaper 3M Aluminum Oxide Automotive Sandpaper, Coarse, • 3 2/3" x 9" 3 2/3" x 9" MMM 03038NA • Great when used with 3M Sanding Blocks (PN 03148 or 03149) 3M Imperial Wetordry Sandpaper, 3 2/3" x 9" MMM 03022 • Suitable for hand or machine sanding • Can be used on metal, plastic body filler and fiberglass • Contains a tough and versatile synthetic abrasive made with • Designed for sanding old paint, primer and final coats. aluminum oxide mineral for perfect sanding • Ideal for sanding primers, sealers, plastic, lacquers and paints. • Great for use with 3M Sanding Block (PN 03149 or 03148) • 1000 grit sandpaper 3M Aluminum Oxide Automotive Sandpaper, Medium, • 3 2/3" x 9" 3 2/3" x 9" MMM 03035NA • Great when used with 3M Sanding Blocks (PN 03148 or 03149) 3M Imperial Wetordry Automotive Sandpaper, 3 2/3" x 9" MMM 03001 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order. CARQUEST® Auto Parts Service Lines Catalog 1 • Works well for sanding old paint, primer and final coats • Ideal abrasives for detailed finishing and polishing • Excellent for sanding primers, sealers, plastic, lacquers and paints • Trizact technology delivers fast, extremely consistent cut • 2000 grit sandpaper • Very fine grade abrasive delivers refined finishes to auto clear • 3 2/3" x 9" coats • Great when used with 3M Sanding Blocks (PN 03148 or 03149) • Lightweight foam backing provides flexibility and attaches easily to sanding blocks 3M Imperial Wetordry Automotive Sandpaper, • Excellent for wet sanding to reduce dust and prolong sheet life 3 2/3" x 9" MMM 03003 3M Trizact Performance Sandpaper, 3 2/3 in. x 9 in., Sandpaper-Hand Sanding 5000 grit MMM 03056 • Works well for sanding old paint, primer and final coats • Excellent for sanding primers, sealers, plastic, lacquers and • Most flexible backing with more consistent scratch paints pattern make this 3Ms best wet sanding product • 1500 grit sandpaper • 9" x 11" Sheets • 3 2/3" x 9" • 5 sheets per pack • Great when used with 3M Sanding Blocks (PN 03148 or • 220 grit sandpaper 03149) FTE Imperial Wetordry Sheet, 9" x 11" 3M Imperial Wetordry Automotive Sandpaper, MMM 32043 3 2/3" x 9" MMM 03002 • Waterproof for wet sanding • Strips paint to metal and shapes and sands body filler • Excellent for sanding primed surfaces • Sands faster and lasts longer • Removing orange peel, dust nibs and light sagging • Clog resistant of the top coat • Ideal for body work • Designed for sanding old paint, primer and final • 80 grit sandpaper coats. 3M Premium Automotive Sandpaper, 3 2/3" x 9" • Ideal for sanding primers, sealers, plastic, MMM 03076 lacquers and paints. 3M Wetordry Sandpaper Sheet, 9" x 11", Assorted MMM 03021 • Used in wet sanding. Use for scuffing the blend • For finishing of shaping body filler and beginning sanding area prior to painting. process • Most flexible backing with more consistent scratch • Sands faster and lasts longer pattern make this 3Ms best wet sanding product. • Clog resistant • Abrasive Mineral type: Aluminum Oxide. • Ideal for body work • FEPA: P400 • 180 grit sandpaper 3M Imperial Wetordry 9" x 11" Sheet 3M Premium Automotive Sandpaper, 3 2/3" x 9" MMM 32038 MMM 03077 • Most flexible backing with more consistent • Perfect for primer, glaze, and putty preparation scratch pattern make this 3M`s best wet sanding • Sands faster and lasts longer product. • Clog resistant • 9" x 11" Sheets • Ideal for body work • 5 sheets per pack • 320 grit sandpaper • 800 grit sandpaper 3M Premium Automotive Sandpaper, 3 2/3" x 9" 3M Imperial Wetordry Sheet, 9" x 11" MMM 03078 MMM 32035 • 3M`s fastest cutting, longest lasting abrasive for saving labor costs and improving quality • Structured abrasives feature an engineered surface of • 9" x 11" Sheets microscopic three-dimensional structures resembling pyramids. • 5 sheets per pack • This precise and consistent abrasive surface is ideal for • 1000 grit sandpaper stainless steel applications requiring a fine finish. FTE Imperial Wetordry Sheet, 9" x 11" 3M Trizact 1/3 Sheet MMM 03064 MMM 32021 * Disclaimer: Not all products listed in this catalog are stocked in all stores or DC locations. If not stocked, they are available via special order. 2 CARQUEST®Auto Parts Service Lines Catalog Body Filler • Use for wet sanding and dry sanding without • Fiberglass strands and fibers make it twice as strong switching sandpaper as regular body filler • Full range of grades is ideal for aggressive or • Covers small (up to 1/2") holes without the need for refined auto sanding backing strips, fiberglass resin or cloth • Silicon carbide abrasive self-fractures for longer • Excellent as a foundation for hole, dent and rust-out life repair • Flexible lightweight paper conforms to auto body • Can be paired with body filler and glaze for complete surfaces for consistent finishes repairs • Delivers 10% smoother finish vs. conventional 3M • Sandable in as little as 20 minutes for quick repairs sandpaper Bondo Glass Reinforced Filler, 1.37 lbs. 3M WetordrySandpaper, 32044, 2000 Grit, BON 00277 9 inch x 11 inch MMM 32044 • Professional-grade filler repairs dents, holes and scratches • Levels minor dust nibs and for light sanding to • Adhesion promoted filler works faster on galvanized adjust mismatched orange peel on all automotive steel, great for newer vehicles (1998+) paints. • Advanced resin technology makes for smooth, easy • 3Ms fastest cutting, longest lasting abrasive for application and sanding saving labor costs and improving quality. • Minimal shrinkage - creates and maintains the ideal • Abrasive Mineral type: Silicon Carbide. surface for painting • ANSI grade: 1500 • Cures in as little as 20 minutes for fast repairs 3M Imperial Wetordry 9" x 11" Sheet - Bondo Professional Gold Filler, 12.80 oz. 5 Sheets per Pack MMM 32023 BON 00237 • A premium body filler that is very easy to mix, smooth, and apply • Scuffing pad is designed to prepare the surface prior • It is extremely easy to sand and does not load like to painting price point body fillers • Works like steel wool and will not splinter, rust or shred • The product is water resistant to prevent rusting • 6" x 9" size • It has superior adhesion to e-coat surfaces, fiberglass, wood and steel because it is an adhesion promoted 3M Paint and Body Scuff Pad, 6" x 9" MMM 03193 product • Repairs dents, patches holes and leaks Bondo Professional Gold Filler, Quart (US) Can (Net Weight 14 oz) BON 233 BODY REPAIR • Reinforced with aluminum - extra strength in an easy-spreading filler • Fast-dry formula allows for sanding in as little BONDO - BODY FILLER as 20 minutes • Exceptionally strong - can be drilled, anchored or tapped for cosmetic repairs • Compatible with metal, fiberglass, masonry • Formulated to be a non-shrinking, non-reactive & and wood for auto and home permanently durable material • Provides a metallic appearance that
Recommended publications
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles
    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
    [Show full text]
  • Appendix D – Machining Guidelines
    Appendix D – Machining Guidelines A. Holding and Chucking When holding any composite billet or part it is important to remember that, unlike metallic materials, polymers will deform/distort under excessive holding pressures. This is very important when machining parts/billets with a thin cross-section (0.250 in / 6.35 mm or under) and for finish machining. Parts/billets that are held too tightly may spring back after release from the holding mechanism and result in parts that are not concentric and/or undesirable dimensions. 1. Standard Jaw Chucking Four or six jaw chucks are acceptable for thick cross-section parts and billets. Ensure medium chucking jaw pressure to prevent material distortion. 2. Pie Jaw Chucking Pie jaw chucking, contacting as close to 90% of the OD as possible, is a superior holding method over standard jaw chucking. This works well for any operation and is preferred over standard chucking for finish machine operations. 3. Adhesive Bonding / Gluing As an alternate to standard chucking directly to the composite, a billet can be glued to a fixture of alternate material prior to machining operations. If this method is used, it is recommended that guidelines from the adhesive manufacturer be followed to ensure sufficient quantity and coverage. Both Loctite® 4090 and 3MTM Scotch-WeldTM Acrylic Adhesive 8405NS have been successfully used. 4. Holding Fixtures Use holding fixtures to grip composite components during finish machining operations. Holding fixtures shall contact 100%of either the OD or ID and should be a snug fit (in/out by hand). PTFE is the best material of construction for fixtures with PVC being a close (slightly more rigid) second choice.
    [Show full text]
  • Finishing Sander
    Finishing Sander I. Competencies Given a properly adjusted finishing sander, accessories, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the finishing sander. B. Pass a written test on safety and operating procedures of the finishing sander with 100 percent accuracy. C. Demonstrate ability to use the finishing sander, following suggested safety rules and correct operation procedures. II. Instructional Materials and Procedures A. Identification of basic finishing sander parts. 1. Brush Holder 6. Paper Clamp 2. Switch Lock 7. Pad 3. Trigger Switch 8. Paper Clamp 4. Handle 9. Aluminum Housing 5. Cord Strain Reliever 10. Front Hand Knob B. Finishing Sander Safety 1. Wear safety glasses at all times when using the finishing sander. 2. Wear a dust mask or respirator to prevent breathing the fine saw dust particles that are generated by the finishing sander. 3. Keep the electrical and extension cords away from the work area. 4. Wear hearing protectors when using finishing sanders that are noisy. 5. Secure or clamp the stock before starting the sanding operation. 6. Watch out for slick walking suffices when using the finishing sander. Fine dust particles will settle on the floor making it slick. 7. Visually inspect the sander to make sure the electrical cord is not frayed or pulled out of the sander housing. If either condition exists repair the sander before using. 8. If the sander sparks excessively when being used check the brushes. Reseat or replace the brushes as necessary to reduce sparking. 9. Do not over-extend and get off balance when using the finishing sander.
    [Show full text]
  • Abrasive Wheel Grinder Abrasive Wheels and Grinding Machines Come in Many Styles, Sizes, and Designs
    Abrasive wheel grinder Abrasive wheels and grinding machines come in many styles, sizes, and designs. Both bench-style and pedestal (stand) grinders are commonly found in many industries. These grinders often have either two abrasive wheels, or one abrasive wheel and one special-purpose wheel such as a wire brush, buffing wheel, or sandstone wheel. These types of grinders normally come with the manufacturer’s safety guard covering most of the wheel, including the spindle end, nut, and flange DEWALT Industrial Tool Co. projection. These guards must be strong enough to withstand the effects of a bursting wheel. In addi- tion, a tool/work rest and transparent shields are often provided. Hazard Bench-style and pedestal grinders create special safety problems due to the potential of the abrasive wheel shattering; exposed rotating wheel, flange, and spindle end; and a naturally occurring nip point that is created by the tool/work rest. This is in addition to such concerns as flying fragments, sparks, air contaminants, etc. Cutting, polishing, and wire buffing wheels can create many of the same hazards. Grinding machines are powerful and are designed Exposed spindle end, flange, and nut. No tool/workrest. to operate at very high speeds. If a grinding wheel shatters while in use, the fragments can travel at more than 300 miles per hour. In addition, the wheels found on these machines (abrasive, polishing, wire, etc.) often rotate at several thousand rpms. The potential for serious injury from shooting fragments and the rotating wheel assemblies (including the flange, spindle end, and nut) is great. To ensure that grinding wheels are safely used in your work- place, know the hazards and how to control them.
    [Show full text]
  • Technology at Rocky Flats, Contact David Maloney, Kaiser-Hill Company, (303) 966-7566, Or Gary Huffman, DOE, Rocky Flats Field Office, (303) 966-7490
    Demonstration & Deployment Summary Ultra-high Pressure Water Jet Used to Remotely Cut B774 Tank Summary chanical cutting with Sawzalls or nibblers will break loose Liquids used for process- fixatives and cause re-suspension of contaminants. Workers ing plutonium at Rocky are also exposed to cutting hazards that have the potential to Flats required hundreds breach personal protective equipment (PPE). of tanks for storage and Thermal cutting using plasma-arc requires construction of treatment. Many of specialized containment and ventilation systems to protect these tanks are so large workers and control dust and fumes. Installation of these they had to be installed systems is engineering-intensive, time consuming and prior to the completion expensive. Thermal cutting also creates potential toxic and of the buildings that corrosive hazards when the tank contains organic or housed them. Some tanks halogenated organic residues. contain polychlorinated biphenyls (PCBs), oth- D&D managers envisioned alternative cutting methods that ers may contain beryl- would reduce work- lium, and nearly all of ers’ exposure to them are contaminated cutting hazards, er- with plutonium and am- gonomic challenges ericium. and the potential for airborne radioactiv- Large tanks, such as the 7,300- ity and beryllium gallon New Tank 40 in building contamination that 774, are far too large to be re- result from thermal moved from the building. To size- or mechanical size- reduce New Tank 40, workers reduction methods. would have used nibblers to com- plete three cuts around the tank’s 20-foot circumference. The ultra- The high pressure water-jet, manufac- Technology tured by Jet Edge, instead made Jet Edge of St.
    [Show full text]
  • Water Jet Cutting a Technology on the Rise
    Water Jet Cutting A Technology on the Rise Water Jet Cutting- A Technology on the Rise Foreword: Siberia to Iceland, from Norway to South The purpose of this brochure is to give the Africa. reader a rough overview of Waterjet Specially trained technicians are constantly Cutting. In addition to precise cutting of on duty and can help you immediately at various materials as presented, many any time. special applications i.e. medical and in the decommissioning and demolition field Service and wear parts are shipped within exist – these however being outside the 24 hours. scope of this text. For any additional Our contract-cutting department takes information, our KMT Waterjet team is care of our customers’ needs to the fullest, always available. Also, we would like to enabling us to perform test-cutting welcome you to visit our homepage procedures in order to optimize the www.kmt-waterjet.com, where you have cutting method, allowing you for the option of downloading useful files. economically and technically sound In order for you to get a better operation of your machines. understanding of KMT Waterjet Systems, The KMT Waterjet team in Bad Nauheim is we would also like to take this opportunity always available to answer your questions! to present our company. In the Autumn of 2003, KMT AB of Sweden purchased the Waterjet Cutting Division from Ingersoll-Rand. The KMT Corporation is an Internationally active corporation with over 700 employees worldwide. KMT Waterjet Systems employs 200 people. Further KMT brands include UVA, LIDKOPING, KMT Robotic Solutions, KMT Aqua-Dyne, KMT McCartney, and KMT H2O.
    [Show full text]
  • The Original. Versatile and Powerful
    iNTEriOr CONSTruCTiON The Original. Versatile and powerful. FEiN MultiMastEr – the universal system for interior construction and renovation NEW! Now available in a cordless version From the inventor of the power tool: FEIN MultiMaster. More than 40 year’s experience is built into this system. Original FEiN accessories – developed for the MultiMastEr. FEIN brought the first oscillating power tool to the market Original FEIN accessories guarantee outstanding results and an over 40 years ago. These decades of experience are built into unrivalled long service life. It handles all common renovation and the FEIN MultiMaster, making this universal system for interior interior construction work for professionals and also provides construction and renovation unique in its diversity of applications unique application solutions. Maximum performance, safety and and performance. In addition, the MultiMaster impresses with high reliability are guaranteed with the FEIN MultiMaster. quality components and is an indispensible companion for trade and industrial professionals. Technology / Quality The Original Page 4 The MultiMaster Page 6 The MultiMaster Cordless Page 7 Accessories know-how Page 10 2 FEiN MultiMastEr Cordless – mobile and powerful. Your benefits with FEiN oscillating power tools: The new battery version makes the FEIN MultiMaster more flexible and convenient than ever. Cordless, but with identical performance, ɰ More than 40 year’s experience with oscillation technology. so work can be done anywhere, even without a power supply. And ɰ The high “Made in Germany” quality you expect. all this in the durable quality that you expect from a real Original. ɰ Unrivalled performance and versatility. ɰ Original FEIN accessories for perfect results and maximum tool life.
    [Show full text]
  • Tool Care and Sharpening.Ppt [Read-Only]
    Tool Care And Sharpening Bill Boytim The Sharpening Philosophy “Sharpen while the tool is still sharp, not to recover sharpness” Type of Cutting Edges Determining if Edge is Sharp Concepts for Sharpening Concepts for Sharpening Concepts for Sharpening Abrasive Types • Synthetic • Garnet • Aluminum Oxide • Arkansas Stones • Silicone Carbide • Ceramic • Diamond Abrasives Remove Material and Leave Gouge Marks Abrasive Size • The larger the number the finer the particle • U. S. Grit 100 = Japanese Grit 150 • U. S. Grit 180 = Japanese Grit 240 • U. S. Grit 320 = Japanese Grit 500 • U. S. Grit 900 = Japanese Grit 4000 • U. S. Grit 1000 – 1200 Finest = Japanese Grit 6000 Finest • Larger the number the higher the polish Tools for Sharpening File Hand shield made of cardboard Can also use leather or thick rubber. Keeps your hand from contacting the sharp edge Tools for Sharpening Jewelry File Tools for Sharpening Chain Saw File Concepts for Sharpening Before Filing After Tools for Sharpening Power Belt Sander Concepts for Sharpening Belt Sander and Chipper Blade Concepts for Sharpening Belt Sander and Chipper Blade Tools for Sharpening Hand Held Grinder Tools for Sharpening Hand Held Grinder Tools for Sharpening Hand Held Grinder Tools for Sharpening Wet or Dry Grinder Wet wheel, 180 RPM, note revolution is away from you Dry wheel, 3500 RPM, 6 inch diameter wheel velocity is approximately 60 MPH. If it was 8 inch diameter, velocity would be 80 MPH A wheel speed of approx. 1000 RPM would be better Tools for Sharpening Wet or Dry Grinder Tongue guard
    [Show full text]
  • Fall 2016 Kmt Waterjet Parts Catalog
    KMT WATERJET PARTS CATALOG FALL 2016 Over 40 years ago the very first commercial installation of a waterjet cutting system began operation using a KMT intensifier. Since then, KMT pumps with KMT Genuine Parts have served customers reliably across many industries, including yours. KMT Genuine Parts are manufactured in the USA to the exact standards as the original parts found on new KMT pumps. Our expertise and operating experience extends from the original SL-I operating at 3,800 bar all the way to today’s industry-leading KMT PRO pumps cutting at 6,200 bar. No other provider has this breadth of experience and you can rest assured that your KMT pump will operate at peak performance when you use KMT Genuine Parts. Benefits of KMT Genuine Parts: • Robust quality control inspection process to ensure superior fit and durability • Manufactured to precise specifications best suited for your KMT pump • Improvements made to KMT pumps are incorporated into KMT Genuine Parts • KMT Customer Service and Technical Support is available 24/7 Remember to use KMT Genuine Parts to maintain your pump warranty and ensure that your investment pays off over the long-term. The use of imitation parts will void warranty coverage, compromises safety and may result in reduced component lifetime. Decades of precision manufacturing and engineering experience, proprietary manufacturing processes and patented technology make KMT Genuine Parts an exceptional value – your business is worth it. 2 Contents Topworks Parts 5 Seal Assemblies 7 Abrasive Feed Tube Assembly 35
    [Show full text]
  • PM Work Order ID: 537 Completion Date
    Brandon Starr Test Account Page 1 of 4 Date Created: 9/15/2016 12:01AM Printed on: 9/16/2016 PM Work Order ID: 537 Completion Date: Description Monthly - (GSA) LEE - AHU - Inspection - Monthly - Refer to PM schedule details. Lee County Senior High Location Building Area Priority Medium Heating/Ventilation /Air Area Number Craft Conditioning Brandons top Type AHU list Status New Request Estimated Hour 0.00 Brandon Starr Assigned To Ryan, Kennedy Requester Estimated Start 9/15/2016 Request Date 9/15/2016 Est. Completion Req. Completion Date Date Budget Code Purpose Code Preventive Maintenance Project Code Project Description Equip Item No. Equip Desc Notes Purchases To Date: $0.00 Date Inv/Ref Description Supplier Pool Qty Cost Each Labor To Date: h Date Name Hours Technician Name Date Confirmation Date www.schooldude.com MaintenanceDirect Printed by Brandon Starr Brandon Starr Test Account Page 2 of 4 Date Created: 9/15/2016 12:01AM Printed on: 9/16/2016 PM Work Order ID: 537 Completion Date: Tools Tools Group A 1. Standard and Phillips head screw drivers-various sizes. 2. Pliers-vise grip (2), slipjoint, needlenose, diagonal, cutting pliers, side cutters. 3. Ball peen hammer. 4. Hack saw and spare blades. 5. 3/8' drive socket set and ratchet. 6. Small set of Allen wrenches. 7. Assorted center punches, drift punches, and steel chisel. 8. 12' measuring tape. 9. Crescent wrenches 4' to 8'. 10. Open and box end wrenches ¼' to¾'. 11. File. 12. Pipe wrenches to 14'. 13. Small level and square. 14. Pocket knife. 15. Flashlights. 16.
    [Show full text]
  • Place the Gouge in the Third Station of the Sharpening Guide and Lay the Side of the Gouge Against the Left Wall of the Station (Figure 24-12)
    Figure 24-14.Position the roundnose chisel, Figure 24-13.Set the parting tool’s side in bevel up in the fourth station. Tighten the the first station. knob. Place the gouge in the third station of the sharpening guide and lay the side of the gouge against the left wall of the station (Figure 24-12). Rotate the gouge until its center touches the abrasive. With the machine "OFF" practice rotating the gouge, first clockwise from the center to the edge, and then counterclockwise from the center of the gouge to the edge. You should notice while rotating the gouge that in order to keep the bevel in contact with the abrasive, you must slide the gouge forward on the station as the bevel is ground from the center to each edge. After you get the feel of this grinding motion, be sure the gouge is not touching the abrasive and the speed dial is set to "Slow" (if you are using the Mark V), then turn on the machine. Gently slide the gouge against the wall of the station and into the moving abrasive. Start rotating the gouge, like you practiced. Repeat this several times. Grind away only enough metal to remove any damage to the cut-ting edge and create a slight burr. If the gouge is being ground for scraping, it is ready to use (the burr is sharp and scrapes very well). If the gouge is being ground for shearing or cutting, it will need to be honed to a razor sharp edge. Grinding the Parting Tool— The parting tool has a bevel ground on both the top and bottom edges.
    [Show full text]
  • Sanding Tools
    SANDING TOOLS PREPPIN’ WEAPON SANDING BLOCK SANDPAPER Preppin’ Weapon is a The weights and grits listed have been found to handy sanding block made be the most ef fec tive for sanding fiberglass/epoxy of Styrofoam core and high CM surfaces. Sheet Size: 9” x 11”. impact ABS that won’t break when dropped. Easy to Price /Sheet grip for wet or dry sanding. Sandpaper Type Part No. Less than 50 Contoured to fit the shape Sheets of a hand and is sized to fit a 1⁄4” sheet of plain backed WP Aluminum Oxide Open Coat “D” 01-26200 $1.75 36 Grit Weight 8 x 11 sandpaper or a 2 3⁄4” wide file paper. It’s coil spring design holds single or SANDPAPER 3M™ multiple sheets equally tight 3M™ Wetordry™ Abrasive Sheet 413Q is an and saves reloading time by ME abrasive sanding paper constructed on a light, stacking up to 4 sheets and A-weight paper backing and features a water- tearing them away as the proof resin bonding to help prevent heat buildup. abrasive wears out. Save The silicon carbide abrasive and waterproof reloading time by using col- backing make this paper an ideal product for ors to indicate grits. Excellent for builders of aircraft, boats, cars, etc. sanding applications such as paint prep, sanding, Yellow ..........................................................P/N 12-00505 ...........$20.50 HA sealer sanding, and solid surface finishing.This Red ..............................................................P/N 12-00506 ...........$19.85 will produce satin-smooth finishes on metal and Green...........................................................P/N 12-00507 ...........$19.95 other doped, lacquered, or enameled surfaces.
    [Show full text]