Product Information

Total Page：16

File Type：pdf, Size：1020Kb

Product Information Modelling Non-firing Clay Properties : Natural red or gray clay, ready for use. Formulated with a synthetic binder hardens without firing in 4 or 5 days. Very malleable, it does not dry with cracks. Can be waterproofed to seal non-food containers.. Product Usage : Tips • The non-firing clay can be used in modelling but also for moulding. In a fingerprint, without waiting until it hardens, it can be poured as plaster. •The drying can be accelerated by placing the object in a microwave oven for a few minutes. •Preservation: until they have dried, the Gedeo clay can be reused and stored indefinitely in a wet towel inside a tightly closed plastic bag. Modelling Clay Properties : Fine and natural white clay. Highly malleable, it is recommended for modelling, sculpture and pottery. Firing in kiln at 980ûC. Product Usage : Tips • For a smooth finish, apply the turpentine with a brush or finger on the model to mould. • Place the clay model near a source of heat to soften and work more easily. Modelling Clay Waterproofing agent Properties : Made from acrylic resin, it is ideal for sealing clay containers without firing. The colour yellow can identify any shortfalls in the application. Dries clear. Drying time 10 hours. Its temporary colour makes it easy to apply. Product Usage : Waterproofing agent Used as a coating the waterproofing agent covers the surface completely. It is fluid and it penetrates well to form a seal. Its temporary colour makes it easy to apply application. Modelling tools Properties : Set of 4 tools to sculpt the clay. The trimming tool empties and hollows, the modelling tools sculpts and carves, the ribbing tool smooths and cuts and the cutting wire to cut the white edges. White, fine and natural. Very malleable, it is recommended for the work of modeling, sculpture and pottery. Bake at 980 ° C. céramic Product Usage : Very malleable, it is recommended for modeling, sculpture and pottery. Bake at 980°C in a ceramic oven. .

Copy Link

Recommended publications

CUNY Careerpath 3D Printing New York City College of Technology February 1, 2014
CUNY CareerPATH 3D Printing New York City College of Technology February 1, 2014 www.cuny.edu This work is licensed under a Creative Commons Attribution 4.0 International License. This workforce solution was funded by a grant awarded by the U.S. Department of Labor’s Employment and Training Administration. The solution was created by the grantee and does not necessarily reflect the official position of the U.S. Department of Labor. The Department of Labor makes no guarantees, warranties, or assurances of any kind, expressed or implied, with respect to such information, including any information or it’s completeness, timeliness, usefulness, adequacy, continued availability or ownership. The CUNY CareerPATH Program is an equal opportunity employer/program and auxiliary aids and services are available upon request to individuals with disabilities. New York City College of Technology The City University of New York CareerPATH Program - Green Advanced Manufacturing Collaborative (GAMC) Syllabus :: 3D Printing Description: Building on the foundations obtained in the prerequisite modeling course, students will further their modeling/computational skills to create water-tight designs and produce a number of types of 3D prints. Projects will provide students with experience in the use of a variety of tools, equipment, concepts, and emerging digitally-driven technologies, including parametric rule-based design, finishing and assembly techniques, and iterative design processes. Objectives: ● To demonstrate the ability to prepare a solid model and send to a fabrication software for printing. ● To extract and finish a fdm or powder printer ● To bring professional projects into the class and work through to process of rapid prototyping.
[Show full text]
Holds the Key Ingredient... Contents
2016 holds the key ingredient... Contents About Us 3 How To Choose The Right Clay For You 4 Our Clays 6 Terracotta 6 Alex Shimwell Stoneware 7 Earthstones 10 Professional 13 Porcelain 16 Earthenware 17 French Regional Clays 18 Paper Clays 18 Powdered Clays 19 Slips 21 Casting Slips 21 Pouring Slips 21 Decorating Slips 21 Raw Materials 22 China/Ball Clays 22 Raw Clays 22 Fluxes 22 Oxides 23 Groggs 23 Plasters 23 Deflocculants 23 Sundry Materials 24 Custom Clay Formulas & Special Order Clays 25 Warranties & Responsibilities 25 Technical Information 26 Jane Wheeler 2016 Price List 30 Distributors 34 Front cover images are provided by... Top: Clare Wakefield Bottom: Beverley Gee, Garry & Pollie Uttley, Susanne Luckacs-Ringel 2 INFO About Us In the heart of the potteries over the past 36 years over 90 clay bodies to choose from Valentine Clays has Valentine Clays, a family run manufacturer, has worked ensured that there is a product to suit a potters every directly with the studio potter community formulating need whether you are a beginner or a professional. and fine tuning clays using the best possible ingredients. For advice or help with any technical issues please call This close working relationship enables the world-leading 01782 271200 or email sales@valentineclays.co.uk clay manufacturer and raw materials supplier; based we will be only too pleased to help. in Stoke-on-Trent, to successfully develop ceramic clay bodies to suit the specific requirements of a long list of renowned British and International potters. The team at Valentine Clays prides itself on constant development of new and innovative clays bodies using Kind regards, the latest ceramic manufacturing equipment; with The Valentine Clays Team Thank you to the studio potters whose images, taken from our online gallery, have been used in this brochure.
[Show full text]
An Outlook on Museology Through a Practice of Clay Modelling
UNIVERSITÉ PARIS 1 PANTHÉON-SORBONNE CENTRE DE RECHERCHE HiCSA (Histoire culturelle et sociale de l’art - EA 4100) DISCUSSING HERITAGE AND MUSEUMS: CROSSING PATHS OF FRANCE AND SERBIA Choice of Articles from the Summer School of Museology Proceedings Editors Dominique Poulot and Isidora Stanković AN OUTLOOK ON MUSEOLOGY THROUGH A PRACTICE OF CLAY MODELLING INHERITED FROM A PERSONAL CROSS HISTORY: BEYOND A MICRO RESISTANCE TO VIOLATION OF IMAGINATION ADRIANA POPOVIĆ Electronic reference Adriana Popović, « An Outlook on Museology Through a Practice of Clay Model- ling Inherited from a Personal Cross History: Beyond a Micro Resistance to Violation of Imagination », in Dominique Poulot and Isidora Stanković (Eds.), Discussing Heritage and Museums: Crossing Paths of France and Serbia, Choice of Articles from the Summer School of Museology Proceedings, Paris, Website of HiCSA, online October 2017, p. 211-235. AN OUTLOOK ON MUSEOLOGY THROUGH A PRACTICE OF CLAY MODELLING INHERITED FROM A PERSONAL CROSS HISTORY: BEYOND A MICRO RESISTANCE TO VIOLATION OF IMAGINATION Photo A. Microresistance to violation of imagination (Microrésistance au viol de l’imaginaire), 2001, 33 cm, Terracotta - © Popović Adriana AN OUTLOOK ON MUSEOLOGY THROUGH A PRACTICE OF CLAY MODELLING INHERITED FROM A PERSONAL CROSS HISTORY: BEYOND A MICRO RESISTANCE TO VIOLATION OF IMAGINATION ADRIANA POPOVIĆ Ph.D / University Paris 1 – Panthéon-Sorbonne – Plastic Arts and Art Sciences Biography: Born in Paris 1970, from parents with Yugoslav origins, Adriana had a passion for all earth related things from a very young age. She is a sculptor. Her creative mind and her boundless imagination allowed her to make the most of her education.
[Show full text]
Westminsterresearch Re-Modelling Clay: Ceramic Practice and the Museum in Britain
WestminsterResearch http://www.westminster.ac.uk/westminsterresearch Re-modelling clay: ceramic practice and the museum in Britain (1970-2014) Breen, L. This is an electronic version of a PhD thesis awarded by the University of Westminster. © Miss Laura Breen, 2016. The WestminsterResearch online digital archive at the University of Westminster aims to make the research output of the University available to a wider audience. Copyright and Moral Rights remain with the authors and/or copyright owners. Whilst further distribution of specific materials from within this archive is forbidden, you may freely distribute the URL of WestminsterResearch: ((http://westminsterresearch.wmin.ac.uk/). In case of abuse or copyright appearing without permission e-mail repository@westminster.ac.uk RE-MODELLING CLAY: CERAMIC PRACTICE AND THE MUSEUM IN BRITAIN (1970-2014) LAURA MARIE BREEN A thesis submitted in partial fulfilment of the requirements of the University of Westminster for the degree of Doctor of Philosophy This work forms part of the Behind the Scenes at the Museum: Ceramics in the Expanded Field research project and was supported by the AHRC [grant number AH/I000720/1] June 2016 Abstract This thesis analyses how the dialogue between ceramic practice and museum practice has contributed to the discourse on ceramics. Taking Mieke Bal’s theory of exposition as a starting point, it explores how ‘gestures of showing’ have been used to frame art-oriented ceramic practice. Examining the gaps between the statements these gestures have made about and through ceramics, and the objects they seek to expose, it challenges the idea that ceramics as a category of artistic practice has ‘expanded.’ Instead, it forwards the idea that ceramics is an integrative practice, through which practitioners produce works that can be read within a range of artistic (and non-artistic) frameworks.
[Show full text]
Vitamin C Clay + Ceramic
VITAMIN C CLAY + CERAMIC IN CONTEMPORARY ART IN CONTEMPORARY Vitamin C: Clay and Ceramic in Contemporary Art Roberto Amigo Sarah Douglas Juste Jonutyte Jeremy Millar Stephanie Rosenthal Chief Curator, Museo Nacional de Bellas Editor-in-Chief, Art News, New York Director, Rupert Centre for Arts and Tutor in Art Criticism, Royal College Chief Curator, Hayward Gallery,London The revival of clay as material for contemporary visual artists Artes de Buenos Aires Education, Vilnius, Lithuania of Art, London and a growing interest by curators and collectors in the work Ben Eastham Beatrix Ruf of overlooked ceramic artists, has resulted in a blurring of Max Andrews Co-founder and Editor, The White Review Eungie Joo Jed Morse Director, Stedelijk Museum, Amsterdam Independent curator and writer, and Assistant Editor, Art Agenda, London Independent curator and writer, New York Chief Curator, Nasher Sculpture Centre, boundaries between ‘fine art’ and ‘craft’ and an increase in Barcelona Dallas exhibitions featuring art made of this most traditional material. Bart Rutten Reem Fadda Mami Kataoka Head of Collections, Stedelijk Museum, Laura Barlow Associate Curator, Middle Eastern Art for Chief Curator, Mori Art Museum, Tokyo Hanne Mugaas Amsterdam Vitamin C: Clay and Ceramic in Contemporary Art is the latest Curator, Mathaf Arab Museum of Modern the Abu Dhabi Project of the Solomon R Director and Curator, Kunsthall Stavanger, in Phaidon's best-selling 'Vitamin' series in which art experts Art, Doha, Qatar Guggenheim, New York Norway (curators, critics and collectors) are invited to nominate key Inés Katzenstein Sam Sherman Director, Department of Art, Universidad Independent curator and writer, London artists working in particular medium.
[Show full text]
Modelling Clay Materials Used in Artworks: an Infrared Spectroscopic Investigation B
Stuart et al. Herit Sci (2019) 7:86 https://doi.org/10.1186/s40494-019-0333-3 RESEARCH ARTICLE Open Access Modelling clay materials used in artworks: an infrared spectroscopic investigation B. H. Stuart1* , P. S. Thomas2, M. Barrett3 and K. Head3 Abstract Modelling clays are utilised by artists for their malleable properties. One of the challenges in managing collections containing such materials is the variety of commercial compositions available and, therefore, the variation in the requirements for storage and maintenance of such artefacts. The Art Gallery of New South Wales in Australia is respon- sible for the care of a range of artworks that contain modelling materials, some of which show detrimental property changes and there is concern for the longevity of such works. The aim of the current research is to determine the compositions of the modelling materials utilised in works produced by diferent artists in the gallery’s collection. Infrared spectroscopy was used to identify the main constituents of samples collected from the works of four diferent artists and a variety of material types were determined. Oil-based, air-hardening and polymer clays of varying compo- sition were identifed in the survey of artworks. Signs of deterioration in particular artworks were able to be character- ised using spectroscopy, with the mechanisms identifed including loss and oxidation of the oil component. Where a polymer clay was chosen by one artist, the distortion of the artwork was due to fow of the material over time and demonstrates the need for an understanding of the long term properties of the materials being used.
[Show full text]
SAB Cover AU.Indd
Ceramics & Modelling Contents Air Dry Clay 225 Modelling Clay 227 Plaster, Wire & Mesh 234 Ceramics 236 Modelling Tools & Accessories 229 Porcelain 236 Clay 225 Mosaics 233 Sand 228 Dough 226 Moulds 235 Terracotta 238 Just add $200 of Art & Craft, Stationery Free Freight or Health & Hygiene to your order 223 5135_SAB17_07_Ceramics_AU.indd 223 21/11/16 9:06 am Ceramics & Modelling Types of Ceramics & Modelling A group of malleable substances used to sculpt and build Tips to keep your clay from drying out 1. Place leftover clay in a large plastic container or bucket that has a lid. 2. Fill the clay bucket with air temperature tap water until all the clay is completely submerged. 3. Replace lid firmly or cover opening with thick plastic sheeting and let sit for a week without stirring. 4. Check clay after approx. 5 days. Test this by digging your fingers into the clay. If it feels thick but like melted ice cream, it’s ready. 5. Lift the bucket and drain excess water into the sink. 6. Stir clay up until consistently thick before removing from container onto a kneading board. 7. Wrap clay tightly in thick plastic or store in plastic container with air tight lid until needed. Clay • There are dierent types of clay: modelling, paper, air dry, oven bake and kiln clay • Modelling clay comes in a variety of colours and doesn’t dry out • Paper clay is very lightweight and easy to mould • Air dry clay dries naturally at room temperature • Oven bake clay must be put in an oven to harden • Kiln clay must be fired at 1100-1200°C in a kiln • Clay can also
[Show full text]
Chances and Risks When Making Pottery in School Do Not Be Afraid of Ceramics!
Chances and risks when making pottery in school Do not be afraid of ceramics! In a time when even with our youngest children in nursery school and primary school the visual, optical is thrusting forward through television, computer and the Internet, it seems to be advisable not to neglect the experience of haptic in art lessons. The fundamental experience of "gripping", "touching", "feeling" and "shaping" will open up a basic understanding for body and space and - apart from the visual experience - will lead to a uniformly felt interplay of all senses and thus to a holistic "experience of the self" . Making pottery - this means dealing with the plastic element of clay (earth) - seems to be ideal for this: Clay is inexpensive, easy to process, to be used in every age groups. Moreover, making pottery through the handling of traditional dishes or ceramic works of renowned artists is integral part of all historical epochs and styles. And: Making pottery is fun! Nevertheless, many workshops in schools are deserted, many kilns in schools are unused. Pedagogues sometimes feel a certain scepticism about the material and its conditions going far beyond the also existing attitude "not to get ones hands dirty". Not without good reason is the profession of a ceramist a 2-3 years' educational profession and the justified concerns of teachers with regard to technical problems and risks with clay and glaze often lead to starting back from pottery in lessons. New insights and developments in recent years, however, have simplified doing pottery and made it less risky: Good clay is the basis of everything.
[Show full text]
Cla Y S & Accessories
Modeling Clays & Accessories Modeling Clays & Accessories CLAYS & ACCESSORIES & CLAYS 614 Modeling Clays & Accessories Modeling Clays & Accessories Non-Drying Modeling Clays BRUSHES & BRUSH CARE COLOR & MEDIUMS ® Plastalina Modeling Clay Plast-i-Clay Modeling Clay A pigmented oil base modeling compound (modeling clay) renowned Inexpensive, good quality, non- throughout the world for its smooth consistency and brilliant color hardening plastic clay; non-toxic, range; productions employing this product have won Academy® and harmless ingredients; can be used Emmy® Awards; range includes 8 spectral hues, 7 neutral tones, and & SUPPLIES & over and over remaining soft and 5 earth tones; 24 colors in all; Plastalina is self-adhering, non-toxic, AIRBRUSHES pliable. Four 1/4 pound cellophane never hardens, remains pliable as plastic; in fact, like the taste of wrapped packs per box; six bright fine wine, its consistency improves with age. (Qty=Each) colors. (Qty=Each) 1 Pound Single Color & CANVAS Order No. Color Retail Order No. Color Retail ACCESSORIES AO 91121P Red $4.20 VA 10111 Black $3.59 AO 91122B Gray 4.20 ® VA 10117 Brown 3.59 AO 91123R Green 4.20 Plast-i-Clay Set VA 10119 Dark Green 3.59 PAPER AO 91124S Brown 4.20 6¾ oz. sticks each color. 10 VA 10118 Flesh 3.59 & PADS AO 91125T Yellow 4.20 Colors. (Qty=Each) VA 10120 Goldn Ochre 3.59 AO 91126E Blue 4.20 VA 10112 Gray 3.59 AO 91181E Assorted* 4.20 Order No. Item Retail VA 10108 Green 3.59 *Gray, Green, Red, & Brown AO 91182F 10-Color $1.89 VA 10113 Grey Green 3.59 ART VA 10110 Ivory 3.59 5 Pound Single Color ACCESSORIES Venus Modeling Clay VA 10104 Magenta 3.59 Order No.
[Show full text]
TECHNISCHE HOBBIES TECHNIQUES SPÉCIFIQUES TECHNICAL HOBBIES HOBBY TECNICO Clay and Enamel
TECHNISCHE HOBBIES TECHNIQUES SPÉCIFIQUES TECHNICAL HOBBIES HOBBY TECNICO Clay and enamel 07 / yellow 83 / anthracite 89 / deep black 84 / red Chamotted Modelling Clay, chamotted 25 % 0 – 1 mm: Professional clays with a wide range of uses, suitable for all modelling tech- niques and for small to medium sized pieces. With the exception of clay 6s all clays can be combined with one another, whether for the insertion technique or the marbling technique. Due to the special careful preparation of the natu- ral clays they are so plastic, that with a little practice they can also be turned on the potter’s wheel (e.g. for thick-walled plant containers). When clays 42 053 86 and 42 053 88 are fired in the range of the given highest tempera- ture, frostproof ceramic ware can be produced. 86 / leather coloured 88 / white Modelling firing clay Westerwald 42 051 07 Modelling firing clay, 25 % chamot- SQ: 10 kg te 1000 – 1300 °C, 0 – 1 mm 42 051 83 Modelling firing clay, 25 % chamot- SQ: 10 kg te 1000 – 1300 °C, 0 – 1 mm 42 051 89 Modelling firing clay, 25 % chamot- SQ: 10 kg te 1000 – 1200 °C, 0 – 1 mm 42 053 84 Modelling firing clay, 25 % chamot- SQ: 10 kg te 1000 – 1200 °C, 0 – 1 mm 42 053 86 Modelling firing clay, 25 % chamot- SQ: 10 kg white te 1000 – 1280 °C, 0 – 1 mm 42 053 88 Modelling firing clay, 25 % chamot- SQ: 10 kg Modelling firing clay Westerwald te 1000 – 1300 °C, 0 – 1 mm 42 053 83 Modelling firing clay, 25 % chamot- SQ: 10 kg te 980 – 1100 °C, 0 – 1 mm 42 053 83: white stoneware material, up to 1,100 °C, glazes well at a low firing temperature Clay prices are quoted net, ex works Westerwald.
[Show full text]
In Studio with Marcia Selsor
INTERVIEW In studio with Marcia Selsor Evelyne Schoenmann arcia, you are a Professor In 1991 I was part of a group of Ameri- Philadelphia. Working internationally tru- M Emerita. In 2016 you cele- cans who hosted 12 ceramic artists from ly broadens one’s perspective. brated half a century working in clay. the former Soviet Union and was invited We have known each other a long to Latvia for a month to work with the Alternative firings are your signa- time already, but would you explain same group. Peteris Martinsons was one ture technique. I heard it said that your background to our readers? of the organizers. I have taught work- nobody knows more about this firing I have a BFA and MFA in ceramics. I shops in Europe since 1995. First in Spain technique than you do. How come began teaching ceramics in 1975 in Bill- at Centro Agost 1995-99. Then I began you are so fascinated with fire and ings, Montana. I spent a year on a Ful- teaching at La Meridiana in 2001. I have heat? bright Fellowship researching traditional had numerous international residencies My education in ceramics included kiln Spanish potters in 1985-86, and in 1994 I and participated in symposiums in Can- building and design. I was introduced went to Uzbekistan on a Fulbright Award ada, Iceland, Italy, France, Latvia, Spain, to American “raku” by Paul Soldner in to teach studio ceramics and ceramic art Uzbekistan, and in the US at the Archie 1968. As the sole ceramics instructor in a history at Tashkent Institute of the Arts.
[Show full text]
Sculpting with Clay an Introduction Sculpting with Clay Clay Is an Incredibly Versatile Material, and Has Been Used to Create Everything from Vases to Venus’
Sculpting with Clay An Introduction Sculpting with clay Clay is an incredibly versatile material, and has been used to create everything from vases to Venus’. It is used to create crafts, make miniatures for doll houses and small sets, and to design and make props and characters in the film industry. In this workshop we will explore clay as a medium, getting to know it’s properties and variations. We will look at tools and textures, make miniatures and learn how to create characters from the base armature through to fully fleshed out sculpts. Types of clay There are many varieties of clay which all have their own characteristics, making them better for using in certain projects. The prices and availability of different types of clay vary greatly. Some are used professionally for creating character sculpts or ceramics and so have higher price tags. The kinds of clays that are most readily available are childrens dough clays, but you can find a good range of craft-clays at hobby stores. You also need to pay attention to whether you want an air drying, oven drying or non-drying clay. They all have their pros and cons, but the main factor in which you use will be what you envision your final outcome to be. Do you want something permanently moveable? Are you making a doll or statuette? Or are you just looking to experiment and explore? Dough Clay It’s up to you which type of clay you decide to use, depending on your budget and access to materials, but all of the exercises in this workshop can be done using basic childrens’ dough clay or modelling clay.
[Show full text]