City of Glendale Fire Department

Total Page:16

File Type:pdf, Size:1020Kb

City of Glendale Fire Department CITY OF GLENDALE FIRE DEPARTMENT FIRE STATION NO. 26 RENOVATION GLENDALE, CALIFORNIA PROJECT MANUAL CONSTRUCTION DOCUMENTS PROJECT #: 17052.01 MAY 10, 2019 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents TABLE OF CONTENTS DIVISION 1 - GENERAL REQUIREMENTS 01 10 00 Summary 01 23 00 Alternates 01 26 00 Contract Modification Procedures 01 29 00 Payment Procedures 01 31 00 Project Management and Coordination 01 32 00 Construction Progress Documentation 01 33 00 Submittal Procedures 01 40 00 Quality Requirements 01 42 00 References 01 45 23 Testing & Inspection 01 50 00 Temporary Facilities and Controls 01 60 00 Product Requirements 01 73 00 Execution Requirements 01 73 29 Cutting and Patching 01 74 19 Construction Waste management 01 77 00 Closeout Procedures 01 78 23 Operation and Maintenance Data 01 78 39 Project Record Documents 01 79 00 Demonstration and Training 01 81 19 Construction Indoor Air Quality 01 81 23 Noise and Vibration Control DIVISION 2 – EXISTING CONDITIONS 02 41 00 Demolition PMSM DIVISION 3 - CONCRETE 03 20 00 Reinforcing Steel SWA DIVISION 4 – MASONRY 04 21 13 Brick Veneer Masonry PMSM 04 22 00 Concrete Masonry Unit SWA DIVISION 5 - METALS 05 12 00 Structural Steel SWA 05 40 00 Cold-Formed Metal Framing SWA DIVISION 6 – WOOD, PLASTICS, AND COMPOSITES 06 10 00 Rough Carpentry SWA TABLE OF CONTENTS 1 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents 06 16 00 Sheathing SWA 06 20 00 Finish Carpentry PMSM 06 41 00 Architectural Wood Casework PMSM DIVISION 7 - THERMAL AND MOISTURE PROTECTION 07 27 00 Air Barrier PMSM 07 52 00 Bituminous Membrane Roofing Owner 07 62 00 Sheet Metal Flashing and Trim PMSM 07 84 00 Fire Stopping PMSM 07 92 05 Joint Sealers PMSM DIVISION 8 - OPENINGS 08 11 13 Hollow Metal Doors and Frames PMSM 08 14 29 Prefinished Wood Doors PMSM 08 14 76 Bifolding Wood Doors PMSM 08 43 13 Aluminum-Framed Storefronts PMSM 08 51 13 Aluminum Windows PMSM 08 71 00 Door Hardware ALLEGION 08 80 00 Glazing PMSM DIVISION 9 – FINISHES 09 05 61 Common Work Results for Flooring Preparation PMSM 09 21 16 Gypsum Board Assemblies PMSM 09 22 00 Supports for Plaster and Gypsum Board PMSM 09 30 00 Tiling PMSM 09 65 13 Resilient Base PMSM 09 67 00 Epoxy Resin Flooring PMSM 09 68 13 Carpet Tile PMSM 09 91 00 Painting and Coating PMSM DIVISION 10 – SPECIALTIES DIVISION 11 – EQUIPMENT DIVISION 12 – FURNISHINGS 12 36 16 Metal Countertops PMSM DIVISION 21 – FIRE SUPPRESSION DIVISION 22 – PLUMBING 22 05 00 Common Work Results for Plumbing GM 22 05 19 Meters and Gages for Plumbing Piping GM 22 05 23 General Duty Valves for Plumbing Piping GM TABLE OF CONTENTS 2 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents 22 05 29 Hangers and Supports for Plumbing Piping and Equipment GM 22 05 48 Vibration Controls for Plumbing Piping and Equipment GM 22 05 53 Identification for Plumbing Piping and Equipment GM 22 07 00 Plumbing Insulation GM 22 11 16 Domestic Water Piping GM 22 11 19 Domestic Water Piping Specialties GM 22 13 16 Sanitary Waste and Vent Piping GM 22 13 19 Sanitary Waste Piping Specialties GM 22 40 00 Plumbing Fixtures GM 22 47 00 Drinking Fountains and Water Coolers GM DIVISION 23 – HEATING VENTILATING AND AIR CONDITIONING 23 05 00 Common Work Results for HVAC GM 23 05 13 Common Motor Requirements for HVAC Equipment GM 23 05 29 Hangers and Supports for HVAC Piping and Equipment GM 23 05 48 Vibration Controls for HVAC Piping and Equipment GM 23 05 53 Identification for HVAC Piping and Equipment GM 23 05 93 Testing, Adjusting and Balancing for HVAC GM 23 07 00 HVAC Insulation GM 23 11 23 Natural Gas Piping GM 23 23 00 Refrigerant Piping GM 23 31 13 Metal Ducts GM 23 33 00 Air Duct Accessories GM 23 34 16 Centrifugal HVAC Fans GM 23 37 13 Grilles, Registers and Diffusers GM 23 54 00 Furnaces GM 23 74 33 Packaged Outdoor Heating and Cooling Makeup Air Conditioners GM DIVISION 26 – ELECTRICAL 26 05 00 Common Work Results for Electrical GM 26 05 19 Low-Voltage Electrical Power Conductors and Cables GM 26 05 26 Grounding and Bonding for Electrical Systems GM 26 05 29 Hangers and Supports for Electrical Systems GM 26 05 33 Raceway and Boxes for Electrical Systems GM 26 24 16 Panelboards GM 26 27 26 Wiring Devices GM 26 51 00 Interior Lighting GM DIVISION 27 – COMMUNICATIONS DIVISION 28 – ELECTRONIC SAFETY AND SECURITY DIVISION 31 – EARTHWORK DIVISION 32 – EXTERIOR IMPROVEMENTS TABLE OF CONTENTS 3 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents DIVISION 33 – UTILITIES EXHIBIT A Test Report: Asbestos Analysis of Bulk Materials – Fire Station 26 LA Testing Test Report: Lead in Paint Chips – Fire Station 26 LA Testing END OF TABLE OF CONTENTS TABLE OF CONTENTS 4 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents SECTION 01 10 00 SUMMARY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 1 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Work covered by the Contract Documents. 2. Type of the Contract. 3. Work phases. 4. Use of premises. 5. Owner's occupancy requirements. 6. Work restrictions. 7. Specification formats and conventions. 8. Deferred Approvals. 9. Pollution Control. 10. Storm Water Pollution Prevention Plan. 11. Lead-Containing materials. 12. Additional DSA requirements. 1.3 SUBMITTALS A. Contractor shall submit written statement of responsibility per CBC 1706A.1 B. R & B Schultz Early Childhood Education Building 1.4 WORK COVERED BY CONTRACT DOCUMENTS A. Project Identification: City of Glendale Fire Department Fire Station 26 Renovation 1. Project Location: 1145 N Brand Blvd, Glendale, CA 91202 B. Owner: City of Glendale C. Architect: PMSM. D. The Work consists of the following: 1. The Work includes exterior and interior renovations to building residential and work areas. The work is inclusive of architectural, structural and mechanical renovations. SUMMARY 01 10 00 - 1 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents 2. The intent of these drawings and specifications is that the alteration, rehabilitation or reconstruction is to be in accordance with Title 24, California Code of Regulations. Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the contract documents wherein the finished work will not comply with Title 24, California Code of Regulations, a Construction Change Document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by the City of Glendale before proceeding with the repair work. 1.5 TYPE OF CONTRACT A. Project will be constructed under a single prime contract. 1.6 WORK PHASES A. The Work shall be conducted in single phase. 1.7 USE OF PREMISES A. General: Contractor shall have limited use of premises for construction operations as indicated on Drawings by the Contract limits. B. Use of Site: Limit use of premises to work in areas indicated. Do not disturb portions of Project site beyond areas in which the Work is indicated. 1. Owner Occupancy: Allow for Owner occupancy of Project site and use by the public. 2. Driveways and Entrances: Keep driveways and entrances serving premises clear and available to Owner, Owner's employees, and emergency vehicles at all times. Do not use these areas for parking or storage of materials. a. Schedule deliveries to minimize use of driveways and entrances. b. Schedule deliveries to minimize space and time requirements for storage of materials and equipment on-site. 1.8 OWNER'S OCCUPANCY REQUIREMENTS A. Full Owner Occupancy: Owner will occupy site and existing building during entire construction period. Cooperate with Owner during construction operations to minimize conflicts and facilitate Owner usage. Perform the Work so as not to interfere with Owner's day-to-day operations. Maintain existing exits, unless otherwise indicated. 1. Maintain access to existing walkways, corridors, and other adjacent occupied or used facilities. Do not close or obstruct walkways, corridors, or other occupied or used facilities without written permission from Owner and authorities having jurisdiction. 2. Provide not less than 72 hours' notice to Owner of activities that will affect Owner's operations. B. Owner Occupancy of Completed Areas of Construction: Owner reserves the right to occupy and to place and install equipment in completed areas of building, before Substantial Completion, SUMMARY 01 10 00 - 2 City of Glendale Fire Department Project #17052.01 Fire Station No. 26 Renovation Construction Documents provided such occupancy does not interfere with completion of the Work. Such placement of equipment and partial occupancy shall not constitute acceptance of the total Work. 1. Architect will prepare a Certificate of Substantial Completion for each specific portion of the Work to be occupied before Owner occupancy. 2. Obtain a Certificate of Occupancy from authorities having jurisdiction before Owner occupancy. 3. Before partial Owner occupancy, mechanical and electrical systems shall be fully operational, and required tests and inspections shall be successfully completed. On occupancy, Owner will operate and maintain mechanical and electrical systems serving occupied portions of building. 4. On occupancy, Owner will assume responsibility for maintenance and custodial service for occupied portions of building. 1.9 WORK RESTRICTIONS A.
Recommended publications
  • Winlabel User's Manual
    WinLabel User’s Manual 2017/12/22 Ver 4.0 WINCODE Technology Co., Ltd copyright reserved WinLabel user’s manual Contents STARTUP ......................................................................................................................................................... 4 OPERATING INTERFACE OVERVIEW ............................................................................................................. 6 1 START BUTTON, QUICK ACCESS TOOLBAR AND STYLE SETTING ......................................................... 7 1.1 START BUTTON .................................................................................................................................. 7 1.2 QUICK ACCESS TOOLBAR ..................................................................................................................... 9 1.3 STYLE SETTING TOOLBAR ..................................................................................................................... 9 2 FUNCTIONAL ZONE .............................................................................................................................. 10 2.1 MAIN PAGE..................................................................................................................................... 10 2.1.1 Page Setup .............................................................................................................................. 10 2.1.2 Printer Setup (Driver Setup)...................................................................................................
    [Show full text]
  • Simplification of Trade Documentation Using International Standards
    Rev 3 January 2011 Trust Fund for Trade Facilitation Negotiations1 Technical Note 13 Simplification of trade documentation using international standards Background Documents are the support to collect information and data. Document requirements in international trade serve different purposes. These may include for example documents required as part of governmental procedures, supply chain management and payment requirements. Managing the various documentary requirements becomes problematic as the information need to be submitted to different agencies in different countries and languages, on difference forms, and with various supportive documents attached to them. National and international businesses, traders and transport operators have to cope with numerous documents and forms (sometimes up to 40 originals), often containing redundant and repetitive data and information (200 data elements on average). The World Bank Doing Business Study www.doingbusiness.org provides country-specific data on document requirements for export operations, informing of opportunity costs induced by trade document processing. The data shows that in many developing countries the costs for document preparation are the biggest cost factor in the export process. For example, Indian exporters experienced costs of $350 for document preparation, $120 for Customs clearance, $150 for port and terminal handling and $200 for inland transport. The costs for document preparation in a country with highly simplified and automated processes such as Germany were reported at $85 per shipment. The data indicates that for developing countries and transition economies document simplification and automation is an important instrument to increase competitiveness at competitively low investment costs. Simplification of trade documents, therefore aims at reducing document and data requirements and aligning them to international standards.
    [Show full text]
  • XMITIP User Reference Guide
    XMITIP User Reference Guide SMTP (E-Mail) from z/OS to the World Version 18.03 Revised March 28, 2018 Lionel B. Dyck E-Mail: [email protected] XMITIP User Reference Guide Page 1 of 54 8/6/2021 Table of Contents Table of Contents ............................................................................................................................ 2 Introduction .................................................................................................................................... 5 Acknowledgements ......................................................................................................................... 6 Local Customizations (alter this section for your site and republish for your users) ........................... 7 Using XMITIP in Batch ..................................................................................................................... 8 Usage Notes ................................................................................................................................... 9 Performance Considerations ........................................................................................................................................ 9 XMITIP - The Command (syntax) ................................................................................................... 10 To-Address .................................................................................................................................................................. 11 Other Keywords .............................................................................................................................................................
    [Show full text]
  • Design & Printing Handbook
    Design & Printing Handbook SCSU PRINTING SERVICES Brown Hall Basement St. Cloud State University 720 Fourth Avenue South St. Cloud, Minnesota 56301-4498 [email protected] www.stcloudstate.edu/printingservices P: 320.308.2105 F: 320.308.6407 CONTENTS About Printing Services & Services Offered .......................................................2 Getting Started ..............................................................................................3 Types of Printing & Acceptable File Types .........................................................3 Checklist for Sending Files ..............................................................................3 Filling Out a Printing Requisition ......................................................................4 Design Do’s and Don’ts & Tips to Consider .......................................................6 Standard Paper Sizes & Maximizing Paper Use ................................................7 Book Binding Options & Graphics & Logos ......................................................8 Folding Options & Brochure Setup ...................................................................9 Saving PDFs (InDesign) .................................................................................11 Collecting/Packaging Files for Output (InDesign) .............................................14 Saving PDFs (QuarkXpress) ...........................................................................15 Collecting/Packaging Files for Output (QuarkXpress) .......................................16
    [Show full text]
  • Black & White A4 Multifunctional > up to 40
    ineo 4052 > Black & white A4 multifunctional > Up to 40 ppm Datasheet ineo 4052 Option diagram Interface cable Air cleaning unit for CSRC modem CU-203 EK-P07 USB I/F kit EK-P05 OR Staple fi nisher FS-P02 10-key pad USB I/F kit KP-P01 EK-P06 PDF enhancements LK-102v3 Trusted Platform Module activation LK-115v2 Wireless LAN UK-216 Barcode fonts LK-106 ThinPrint© Client Wireless LAN LK-111 SX-BR-4600 Biometric authentication AU-102 Unicode fonts Serverless Pull OR LK-107 Printing Fax kit ID card reader LK-114 FK-517 various ID card technologies OCR A and Upgrade kit B fonts UK-219 LK-108 OR 250-sheet tray 550-sheet tray PF-P15 OR PF-P16 250-sheet tray 550-sheet tray PF-P15 OR PF-P16 250-sheet tray 550-sheet tray PF-P15 PF-P16 Copier desk SCD-4000e Finishing functionalities Corner Duplex stapling Datasheet ineo 4052 Description ineo 4052 A4 multifunctional with 40 ppm b/w. Standard ineo AU-102 Biometric authenticationFinger vein scanner print controller with PCL, PostScript and XPS ID card reader Various ID card technologies support. Paper capacity of 550 sheets and LK-102v3 PDF enhancements PDF/A (1b), PDF encryption, digital signature 100-sheet manual bypass. Automatic dual-scan LK-106 Barcode fonts Supports native barcode printing document feeder and duplex unit standard. 2 GB LK-107 Unicode fonts Supports native Unicode printing memory, 250 GB hard disk and Gigabit Ethernet. LK-108 OCR A and B fonts Supports native OCR A and B font printing PF-P15 Paper tray A5–A4, 250 sheets, 60–120 g/m² LK-111 ThinPrint® Client Print data compression for reduced network impact PF-P16 Paper tray A5–A4, 550 sheets, 60–120 g/m² LK-114 Serverless Pull Printing Secure and Follow Me printing solution require SCD-4000e Copier desk Provides storage space for print media, etc.
    [Show full text]
  • MFX-7595I Black & White A3 Multifunctional Printer
    MFX-7595i black & white A3 multifunctional printer BRIDGE THE GAP BETWEEN PAPER AND DIGITAL BUSINESS-CLASS DOCUMENT SOLUTIONS 2 MFX-7595i Datasheet CUSTOMER BENEFITS Intuitive operability Mobile connectivity Security Application ecosystem Productivity Sustainability Operate the MFX-7595i like a Print anytime from Secure network integration, Enhanced efficiency thanks to Reliability, high-speed scanning Numerous eco features reduce smartphone or tablet with fully anywhere with data encryption, and advanced Muratec’s extensive and printing, combined with energy consumption and costs customizable user interface Muratec´s innovative user authentication applications portfolio powerful finishing functions mobile technologies OPTIONS Connectivity 1 ENHANCED FEATURES 2 CONNECTIVITY PDF enhancements Fax board x2 LK-102v3 FK-514 OCR text recognition 1 3 Wireless LAN LK-105v4 UK-221 Barcode fonts USB I/F kit LK-106 EK-608 OR Unicode fonts USB I/F kit LK-107 2 EK-609 OCR A and B fonts Biometric authentication LK-108 AU-102 OR Document converter pack BiometricID card reader authentication LK-110v2 AU-102AU-205H 5 ThinPrint® client Mount kit LK-111 MK-735 Antivirus LK-116 FOIP IP-Fax (T.38 Fax) LK-117 4 3 OTHERS 4 MEDIA INPUT 5 MEDIAMEDIA OUTPUT OUTPUT OR OR Working table Large capacity tray Output tray StapleInner Finisher finisher Staple finisher WT-506 LU-303 OT-514 FS-539FS-533 FS-540FS-536 OR Upright panel Large capacity tray RelayPunch unit kit Relay unit WT-519 LU-205 RU-519PK-519 RU-519 OR OR 10-Key pad Banner tray Booklet finisher BookletStaple/booklet
    [Show full text]
  • Mobile Print/Scan Guide for Brother Iprint&Scan
    Mobile Print/Scan Guide for Brother iPrint&Scan Version I ENG Definitions of notes We use the following icon throughout this user’s guide: Notes tell you how you should respond to a situation that may arise or give NOTE tips about how the operation works with other features. Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a trademark of Brother Industries, Ltd. Google, Android, Android Market and Gmail are trademarks of Google Inc. Use of these trademarks is subject to Google Permissions. Apple, OS X, iCloud, iPhone, iPod touch, iPad, iTunes and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Microsoft, Windows, Excel and PowerPoint are registered trademarks of Microsoft Corporation in the United States and/or other countries. Wi-Fi is a registered trademarks of the Wi-Fi Alliance. Wi-Fi Direct is a trademark of the Wi-Fi Alliance. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Brother Industries, Ltd. is under license. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies. ©2011-2012 Brother Industries, Ltd. All rights reserved. i Table of Contents Section I For Android™ Devices 1 Introduction 2 Overview....................................................................................................................................................2
    [Show full text]
  • Printing, Exportin and Emailing | 3 Printing
    Draw Guide Chapter 10 Printing, Exporting and E-mailing Copyright This document is Copyright © 2020 by the LibreOffice Documentation Team. Contributors are listed below. You may distribute it and/or modify it under the terms of either the GNU General Public License (http://www.gnu.org/licenses/gpl.html), version 3 or later, or the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), version 4.0 or later. All trademarks within this guide belong to their legitimate owners. Contributors To This Edition Peter Schofield Claire Wood To Previous Editions John A Smith Jean Hollis Weber Hazel Russman Ron Faile Jr. Feedback Please direct any comments or suggestions about this document to the Documentation Team’s mailing list: [email protected] Note Everything sent to a mailing list, including your email address and any other personal information that is written in the message, is publicly archived and cannot be deleted. Publication date and software version Published June 2020. Based on LibreOffice 6.4. Using LibreOffice on macOS Some keystrokes and menu items are different on macOS from those used in Windows and Linux. The table below gives some common substitutions for the instructions in this document. For a more detailed list, see the application Help. Windows or Linux macOS equivalent Effect Tools > Options menu LibreOffice > Preferences Access setup options Right-click Control +click or right-click Open a context menu depending on computer setup Ctrl (Control) ⌘ (Command) Used with other keys
    [Show full text]
  • Paper Sizes Teacher Notes Activity Description
    Paper sizes Teacher notes Activity description Pupils investigate paper sizes in the A and B international series. They can explore the relationships within each series and between the series. If pupils access information on paper sizes on the web, the focus of their work will need to be on interpreting and explaining their research. Suitability Pupils working at all levels; individuals or pairs Time 1 to 2 hours AMP resources Pupil stimulus Equipment 1 sheet of each of A3, A4, A5, B5 and B6 paper, labelled appropriately. Rulers Key mathematical language Dimension, length, width, area, measurement, centimetre, millimetre, double, half, ratio, proportion, scaling, surd, series, similar, congruent, upper bound, lower bound Key processes Representing Identifying the mathematics involved in the task and developing appropriate representations. Analysing Working systematically; identifying patterns; beginning to make generalisations. Interpreting and evaluating Considering the findings to form convincing arguments. Communicating and reflecting Explaining the approach taken and the outcomes achieved at each stage of the work. Nuffield Applying Mathematical Processes (AMP) Investigation ‘Paper sizes’ Teacher notes page 1 of 9 Supported by the Clothworkers’ Foundation © Nuffield Foundation 2010 Teacher guidance Pupils may have relevant prior knowledge, so the activity should start with a class discussion of paper sizes. Which ones are pupils familiar with? What are they used for, and why? If printing templates to create any of the sheets, please take care that the paper sizes print accurately. Consider the following starter: provide paper sizes A3 to A6 inclusive and ask pupils to write what size they think it is. Choose some of the probing questions to display around the room to prompt discussion.
    [Show full text]
  • PAPER TEMPLATE for ODYSSEY 2018 John Doe Department of Template Design University of Wherever, Acountry [email protected]
    PAPER TEMPLATE FOR ODYSSEY 2018 John Doe Department of Template Design University of Wherever, Acountry [email protected] ABSTRACT • Text height (without headers and footers) is at most 235 mm. This is a layout specification and template definition for the papers of Odyssey 2018 Conference, which will be held in Les • Headers and footers should be left empty (they will Sables d’Olonnes, France, June 26 – 29 June, 2018. This be added for printing). template has evolved from the Odyssey 2014 template that • Check indentations and spacings by comparing to traces back to Eurospeech 2001 and aims at producing this example file (in PDF). conference proceedings in electronic form. The format is essentially the one used for the IEEE ICASSP conferences, but using the standard A4 paper size. 2.1.1. Headings Section headings are centered in boldface with the first word 1. INTRODUCTION capitalized and the rest of the heading in lower case. Sub- headings appear like major headings, except they start at the This template can be found on the conference website. Please left margin in the column. Sub-sub-headings appear like sub- use either one of the template files found on this website when headings, except they are in italics and not boldface. See preparing your submission. If there are special questions or examples in this file. No more than 3 levels of headings should wishes regarding paper preparation and submission for be used. Odyssey 2018, correspondence should be addressed to <[email protected]>. 2.2. Fonts Information for full paper submission is available on the web at <http://www.odyssey2018.org> under which you also will The font used for the main text is Times.
    [Show full text]
  • Getting Started
    FUJITSU Software NetCOBOL V11.0 Getting Started Windows(64) B1WD-3303-01ENZ0(00) March 2014 Preface This manual provides an introduction to NetCOBOL. NetCOBOL provides a full-featured development environment for COBOL programs. It allows you to develop COBOL programs that also easily integrate with other languages. The sample programs shipped with NetCOBOL are intended to give an overview of the capabilities of NetCOBOL. Refer to the "NetCOBOL User's Guide" for further details on using NetCOBOL. Audience Prior to using NetCOBOL, it is assumed that you have the following knowledge: - You have some basic understanding as to how to navigate through and use the Microsoft Windows product on your machine. - You understand the COBOL language from a development perspective. - If you plan on using Microsoft's Visual Basic development environment, you have spent some time using Visual Basic to get a feel for its interface and capabilities. Product Names Product Name Abbreviation Microsoft(R) Windows Server(R) 2012 R2 Datacenter Windows Server 2012 R2 Microsoft(R) Windows Server(R) 2012 R2 Standard Microsoft(R) Windows Server(R) 2012 R2 Essentials Microsoft(R) Windows Server(R) 2012 R2 Foundation Microsoft(R) Windows Server(R) 2012 Datacenter Windows Server 2012 Microsoft(R) Windows Server(R) 2012 Standard Microsoft(R) Windows Server(R) 2012 Essentials Microsoft(R) Windows Server(R) 2012 Foundation Microsoft(R) Windows Server(R) 2008 R2 Standard Windows Server 2008 R2 Microsoft(R) Windows Server(R) 2008 R2 Enterprise Microsoft(R) Windows Server(R)
    [Show full text]
  • Fundamentals of Piano Practice, 2Nd Edition
    Fundamentals of Piano Practice, 2nd Edition by Chuan C. Chang November 21, 2004 ii Copyright 1994–2004; No part of this document shall be downloaded or copied without including the name of the author: Chuan C. Chang, and this copyright statement. Request To those who have found this material useful, please make an effort to let at least two people know about my web site (http://members.aol.com/chang8828/contents.htm), so that we can start a chain reaction of ever more people that will be informed of this site. I am looking for volunteers to translate this book into any language. See “Notes for Translators” in the web page site. Please email me at [email protected] to discuss this matter. This book is now available in German, Polish, Italian and French. I am very grateful to our German translator, Edgar Lins, for his many suggestions that have significantly improved the quality of this book. If you feel that you have benefited from this book and wish to express your appreciation, please send a contri- bution to: C. C. Chang, 35 Orchard Ln, Colts Neck, NJ 07722, USA, to defray my expenses for writing this book and maintaining these web pages. Those who download the non- English versions should send their donations to the translator. If you send $15 or more, I will send you my 1st edition book (available in English only) until I run out of them (include your shipping address and email address). I will pay shipping and handling (1st class in US, airmail for overseas).
    [Show full text]