Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Two projects in detail, with stunning close-ups. A 1 Jimmy Clewes Turn it On – Volume one footless bowl and an oriental box. Project one - a bowl with brass rim inlay 2 Jimmy Clewes Turn it On – Volume two Project two - a long stem goblet. Project one – lidded box 3 Jimmy Clewes Turn it On – Volume Three Project two – footless bowl with silver highlights Project one – colored form using gold leaf 4 Jimmy Clewes Turn it Up – Volume one Project two – thinly turned hat Project one – natural edge bowl 5 Jimmy Clewes Turn it Up – Volume two Project two – box decorated with ebony Project one – natural edge bowl with spun silver 6 Jimmy Clewes Turn it Up – Volume three Project two – Multi off-center piece Project one – wooden spoon from Elm 7 Jimmy Clewes Jimmy goes to Norway Project two – Norwegian Beer Bowl Project one – Celtic shield wall hanging 8 Jimmy Clewes Jimmy goes to Scotland Project two – traditional Spurtle Project one – Wooden bangle with silver inlay 9 Jimmy Clewes Jimmy goes to Las Vegas Project two – closed bowl with turquoise inlay Spindle work, tool sharpening, end grain vase, 10 Jimmy Clewes Turnaround colors a platter, turns exotic oyster box. Health & Safety, Lathes, Chucks, Tools, 11 Jimmy Clewes Back to Basics Sharpening, Abrasives, Finishes Ellsworth explores the full range of his knowledge 12 David Ellsworth Tips for Turners – Tape 3 – Disc 1 and experience in making hollow forms Ellsworth explores the full range of his knowledge 13 David Ellsworth Tips for Turners – Tape 3 – Disc 2 and experience in making hollow forms 14 David Ellsworth Tips for Turners – Tape 1 Open Bowls Ellsworth leads the viewer step-by-step through the 15 David Ellsworth The Ellsworth Signature Gouge wondrous use of this efficient and versatile bowl gouge. A must for all levels. Answers questions about workspaces one might 16 David Ellsworth Tips for Turners – Tape 2, Shop Stuff not have thought of.
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number How to make and use special tools and hollow 17 David Ellsworth Tips for Turners – Tape ‘T’ Tools for Hollow Turning forms Learn to handle the most challenging tool in all of 18 Alan Lacer The Skew Chisel – The Dark Side, The Sweet Side woodturning Simple tools for making tools. Types of steel, quick 19 Alan Lacer Woodturning Shop made Tools and Jigs change handle, thin kerf parting tool. Various jigs. Review sharpening, exercise to develop tool 20 Alan Lacer Projects along the Woodturning Trail Disc 1 control, make several projects Review sharpening, exercise to develop tool 21 Alan Lacer Projects along the Woodturning Trail Disc d2 control, make several projects Neil shows the designing, turning, carving with 22 Neil Scobie Making an Erosion Bowl hand and power tools, sanding and finishing this bowl Neil shows the designing, turning, carving with 23 Neil Scobie Making a Wave Rim Bowl hand and power tools, sanding and finishing this bowl Neil shows the designing, turning, carving with 24 Neil Scobie Making a Tree Platter hand and power tools, sanding and finishing this platter 25 Joe Ruminski Beginning Spindles to Bowls Instruction on Spindle turning and Bowls 26 Stuart King How to Turn Wooden Flowers Turning flowers Learn to make a Band saw Box, various ways of 27 Beth Ireland Turning Outside the Box mounting your box on the lathe Wood choice, mathematics, jigs & chucks, making 28 David Springett Woodturning Wizardry points on sphere, turning spheres, safety, tool making Making the oval chuck, how it works, preparation 29 David Springett Elliptical Turning, an Introduction and cutting, fitting. Euro pen w/variations, American Roller ball and 30 Rex & Kip Turning Pens fountain, turning various media, plus tips and tricks Bud Vase, Green Bowl, Wall Clock, Christmas 31 Rex & Kip Woodturning Projects Vol. one Ornament, Spinning Top, Curly Fries.
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Hour Glass, Toothpick Holder, Stick Pin, Carving 32 Rex & Kip Woodturning Projects Vol. two Mallet, Egg, Peppermill. Fridge magnet, Dry Bowl, Bottle Stopper, Game 33 Rex & Kip Woodturning Projects Vol. three Call, Tool Handle Oil Lamp, Desk Clock, Pizza Cutter, Sphere, Egg 34 Rex & Kip Woodturning Projects Vol. four Kaleidoscope, Doorstop Cross grain and end-grain techniques, translucent 35 Michael O’Donnell Woodturning Turning Green Wood thin bowls, some with natural edges Step-by-step secrets of turning gallery-quality 36 Ray Key The Basic Box turned boxes Step-by-step secrets of turning gallery-quality 37 Ray Key The Capsule Box turned boxes Step-by-step secrets of turning gallery-quality 38 Ray Key The Finial Box turned boxes They discuss basics, tool angles, push vs. pull, Stuart Batty & Mike 39 Two Ways to Make a Bowl spigots & chucks, inside cuts, special grinds, drying Mahoney and helpful tips. Tool selection, wall thickness, design ideas, 40 Mike Mahoney Hollow Forms and Urns, A Workshop vacuum chucking, capacity of urn, design, threaded lids with a finial Wood lot to band saw, to lathe turned rough, drying 41 Trent Bosch Decorative Utility Bowls techniques, re-turn bowl, decorative techniques Shows in detail tools and techniques used after 42 Trent Bosch Sculpting Wood Beyond the Lathe work is removed from lathe 43 Binh Pho Thin Wall Turning Bowl turning, open grain vessel, winged vessel 44 Binh Pho Surface Design on Thin Wall Turning Airbrushing, piercing, texturing, gallery Step-by-step process to get precise jigs and 45 Curt Theobald Introduction to Segmented Turning accurate glue joints in segmented turnings 46 Curt Theobald Segmented Patterns Start to finish blueprint to the finished bowl. From tree to bowl, shows how to turn a dried bowl 47 Tim Yoder Woodturning Workshop blank into a finished bowl Go from chain sawing to turning on the lathe to 48 Johannes Michelsen Creates the Original Wood hat constant thickness to completion
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Bandsaw bowl, Checkered Hollow Form, 49 Malcolm Tibbetts Getting Started - Volume One Segmented Ring Construction This 2-hour DVD is mostly about “feature rings” - various ways to enhance segmented vessels. Detailed instruction is offered on all the styles of 50 Malcolm Tibbetts Tips, Tricks and Feature Ring - Volume Two work that are shown on the front cover. The techniques shown should provide the tools to take your segmented turning to the next level. 51 Larry Fox Creating “Outlays” From Inlays Using Turquoise & other materials 7-Step process for inlaying, filling natural checks & 52 Larry Fox Creating Creative Inlays Cracks, Inlays inside & Outside of vessel, natural or made with tools. Chain sawing. cutting blank round, lathe 53 Steven Russell Bowl Turning: Step by Step Disc one mounting options, shear scraping, drying Mounting dry bowl, truing up, finish turning, adding 54 Steven Russell Bowl Turning: Step by Step Disc two decorative design, finish interior, power sanding, completing the foot. A complete and Concise Guide to 55 Kirk DeHeer Sharpening Demystified Sharpening your Woodturning Tools. Shows sharpening, stand and movement 56 Richard Raffan Turning Wood at lathe, skew use with ease, manipulate gouges effectively, secure stock to lathe If you are interested in making boxes, turning 57 Cindy Drozda Cindy Drozda’s Fabulous Finial Box finials, or improving your woodturning skills, this video is for you! Step-by-Step procedure to make finial star lidded 58 Cindy Drozda Cindy Drozda’s Finial Star bowl, use colored dyes, finial design tips, 3 basic cuts... Brian McEvoy's secrets to Mastering the This DVD will show you the process from raw wood 59 Brian McEvoy Large Captive Boring Bar to sanded piece in easy to follow steps.
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number After you master the two piece hollow Brian McEvoy’s secrets to Creating Two form, you can let your imagination run wild and use 60 Brian McEvoy Piece Hollow Forms this simple technique to turn out museum quality work, Proj: 1 - Woodburn Walrus on Thin Walled Deep Brian McEvoy’s secrets to Wood burning, Vessel, Proj: 2 - Woodburn a Grouse Feather on 2- 61 Brian McEvoy Airbrushing, Texturing & Piercing pc hollow form. Proj: 3 - Airbrush & Piercing a Embellishment Disc 1 ribbon vase. Brian McEvoy’s secrets to Wood burning, Proj: 4 - Texturing, Airbrushing & Piercing a 62 Brian McEvoy Airbrushing, Texturing & Piercing beautiful emperor penguin. Embellishment Disc 2 Demos & discussion on the tool, parts & pieces, Reed Gray aka Robo 63 Bowl Coring with the McNaughton mounting the bowl blank, sharpening, coring a Hippy standard bowl, finding bottom of the bowl,.. Eli demonstrates his method of producing his A Master’s Course in Woodturning Series 3 trademark segmented star blank. There are two 64 Eli Avisera Episode 1 Segmented Star Blanks basic types of segmented star blanks. Both are explained. Eli demonstrates spindle turning methods by A Master’s Course in Woodturning Series 3 producing a pair of Rude Osolnik style candlesticks 65 Eli Avisera Episode 2 Rude Osolnik Candlesticks from a pre-determined plan, using the segmented star blank made in Episode 1. Eli shows the formula to calculate the sizes of segments for any size bowl, included cutting, A Master’s Course in Woodturning Series 3 66 Eli Avisera laminating, gluing, clamping and turning techniques Episode 3 Segmented and Textured Bowl are shown finishing with texturing embellishment methods. Eli begins by making the outside form of a standard A Master’s Course in Woodturning Series 3 67 Eli Avisera bowl. Then the magic begins by cutting V slots into Episode 4 The Inlaid Bowl the profile and then inserting laminated segments. He turns a long thin goblet box utilizing the A Master’s Course in Woodturning Series 3 68 Eli Avisera segmented star blank and shows possible Episode 5 The Goblet Box variations.
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number He demonstrates a beautiful variance of box A Master’s Course in Woodturning Series 3 making that holds potential for similar box making 69 Eli Avisera Episode 6 The Star Box projects. Once made, Eli’s Star box is then decorated using color and piercing. He turns a hollow form from green wood. He uses a form without sides to demo what the A Master’s Course in Woodturning Series 3 70 Eli Avisera tools is actually doing, also uses a laser guided tool Episode 7 Hollow Forms rig. He finishes the hollow form by demonstrating piercing methods. It incorporates most woodturning skills. Starting with the base which is bowl turning. 71 Mick Hanbury Satellite Bowl Disc 1 Moving on to the lid which is precision hollowing. Ending with spindle turning for the finial. It incorporates most woodturning skills. Starting with the base which is bowl turning. 72 Mick Hanbury Satellite Bowl Disc 2 Moving on to the lid which is precision hollowing. Ending with spindle turning for the finial. Bowl in Bowl incorporates off-center turning, inlay, 73 Sue Harker Bowl in Bowl A Perfect Partnership Disc 1 piercing, coloring, Texturing and much more. Bowl in Bowl incorporates off-center turning, inlay, 74 Sue Harker Bowl in Bowl A Perfect Partnership Disc 2 piercing, coloring, Texturing and much more. Covers Basic elements, between centers, grain 75 Lyle Jamieson Bowl Basics The Easy Way Disc 1 orientation, lathe, grinds, design considerations, much, much, more. Clean up face, shaping back of bowl, push cut, wall 76 Lyle Jamieson Bowl Basics The Easy Way Disc 2 thickness, clean final cut, finishes, much, much, more. Blank preparation, between centers on balance In-depth Hollowing Techniques - Made the 77 Lyle Jamieson point, balancing grain, transfer of power, much, Easy Way much more. Understand hollowing process, setup system 78 Lyle Jamieson Hollow Forms The Easy Way correctly, get in control.
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Sharpening Techniques, Tool Techniques, Drill 79 Barry Gross Turning Acrylic Materials Acrylic Blanks, Casting Your Own Blanks, CA Glue Tricks, Buffing & Finishing He moves from the traditional method of creating helical spirals to using the cable driven spiral Spiraling Into Control introducing the Cable 80 Jeff Salter system and provides detailed component level Driven Spiral System description of the cable driven system you can create for your own lathe. A complete course on making a peppermill and 81 Ted Sokolowski Making a Peppermill matching salt shaker or salt mill with strong emphasis on design elements. This DVD covers all you need to know from getting 82 Ted Sokolowski Metal Inlay Techniques started with your first inlay project to advanced carving and inlaying techniques. A guide to adding metal spun accents to wood 83 Ted Sokolowski Making Candlesticks Disc 1 turned projects. Ted’s Goody Box - Make a Trim Tool, Tool Rest, 84 Ted Sokolowski Making Candlesticks Disc 2 Combo Tool, The perfect Egg, plus extras. Bob has produced a much anticipated film for pryrographers just getting started, or for those 85 Bob Neill A Burning Ambition – Mastering Pyrography Disc 1 looking for new directions in preparation for more challenging projects. Bob has produced a much anticipated film for pryrographers just getting started, or for those 86 Bob Neill A Burning Ambition – Mastering Pyrography Disc 2 looking for new directions in preparation for more challenging projects. Influenced by the sea surrounding New Zealand, Terry turns a winged bowl inspired by the manta 87 Terry Scott Manta Ray Bowl Disc 1 rays that swim the shallow warm waters. The video features all the steps to turn, texture and color his signature Manta Ray bowl
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Influenced by the sea surrounding New Zealand, Terry turns a winged bowl inspired by the manta 88 Terry Scott Manta Ray Bowl Disc 2 rays that swim the shallow warm waters. The video features all the steps to turn, texture and color his signature Manta Ray bowl The second installment in Terry's winged bowl 89 Terry Scott Midas Bowl Disc 1 series. The video features all the steps to turn, texture, carve and color his signature Midas bowl The second installment in Terry's winged bowl 90 Terry Scott Midas Bowl Disc 2 series. The video features all the steps to turn, texture, carve and color his signature Midas bowl Packed with hints and tips to enable both the Finishing and Coloring – A complete guide to novice and experienced wood turner to achieve a 91 Mark Raby achieving professional results beautiful finish to their project with advice on selecting the right product to enhance their work. Lisa guides you through which machines to use, 92 Lisa Raby Learn to Burn – A complete guide to Pyrography how to make different tips and how to get your picture onto the wood and ready to burn. The film takes you through a comprehensive Screwples - A Definitive guide to Hand Thread journey into the art of laying threads onto wood and 93 John Berkeley Chasing Disc 1 will sweep away any fears of using the specialty tools. The film takes you through a comprehensive Screwples - A Definitive guide to Hand Thread journey into the art of laying threads onto wood and 94 John Berkeley Chasing Disc 2 will sweep away any fears of using the specialty tools. Using only skew chisels, develop your skill and 95 Alan Lacer Son of Skew challenge yourself with these projects. Tim turns 3 ornaments including his famous 96 Tim Yoder Holiday Turnings Snowman, and a Bell Ornaments turned: Hollow Globe, Sea Urchin, 97 Rex & Kip Woodturning Projects Vol. five - Christmas Ornaments Money box ornament, and a Double Ornament Display Stand
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Like all artists, Cindy & David have struggled with Cindy Drozda & David Left Brain / Right Brain – Developing Signature their inadequacies and abilities. On this DVD they 98 Nittmann Artwork share insights they have gained as they continue to develop as artists With this DVD, Ashley Harwood offers a step-by- 99 Ashley Harwood Sea Urchin Ornaments step guide for making an elegant turned sea urchin ornament With this 2 DVD set John covers; How to use grain John Jordan on Woodturning: The Aesthetics & and color for effect; Why wood cracks and how to 100 John Jordan Properties of Wood prevent it; Dealing with wood movement; and more. With this 2 DVD set John covers; How to use grain John Jordan on Woodturning: The Aesthetics & and color for effect; Why wood cracks and how to 101 John Jordan Properties of Wood prevent it; Dealing with wood movement; and more. On this DVD, she shares her finial turning process. Follow along as Cindy designs a lid for one of her vessels. She show and explains her design 102 Cindy Drozda Elegant Finials strategy, the basic spindle cuts, her Finial Turning technique, the tools she uses and her gouge sharpening method. Topics covered: Fundamentals of pen making; making the basic slimline pen; 2 design variations 103 Rex & Kip Turning Pens to the slimline; tools and usage; adhesives; and materials used for pen making. In volume 5 of their Woodturning Projects video series, Rex Burningham and Kip Christensen team 104 Rex & Kip Woodturning Christmas Ornaments up with Dick Sing to give detailed instruction on how to turn three Christmas ornaments and an ornament stand. 105 Glenn Lucas Mastering Woodturning – Sharpening Techniques 106 Glenn Lucas Mastering Woodturning – Tools and Techniques 107 Glenn Lucas Mastering Woodturning – Bowl Turning Techniques
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Eight projects are profiled. They are: an outdoor birdhouse, picture frames, an oil lamp, Volume Four – Functional Projects – Lessons in 108 Malcolm Tibbetts paperweights, salt and pepper shakers, a wine Segmented Woodturning cooler, ice cream scoops, and a unique type of baby rattle. The projects are: a child’s stacking toy, mass- produced desk clocks, a very unique set of candle Volume Five – More Functional Projects – Lessons in 109 Malcolm Tibbetts holders, kaleidoscopes, a salad bowl set, serving Segmented Woodturning bowls using leftovers, a banksia pod bracelet, and belt buckle with inter-changeable components. These boxes are indeed special. The first one is a "segmented" version of Allan Batty’s famous "Secret Box". The construction will challenge your Volume Six – Special Boxes - Lessons in Segmented turning skills. The second project is based upon the 110 Malcolm Tibbetts Woodturning "Cryptex" container that was featured in the movie and book, "The Da Vinci Code". This is a challenge to create and it can be a challenge for your friends to open. In this DVD, I present over 20 different styles of jewelry. Most items can be created with minimal turning and woodworking skills; although, there are a few techniques that will challenge even the very experienced segmenter. There are many types of Volume Seven – Jewelry - Lessons in Segmented 111 Malcolm Tibbetts earrings, three very different styles of bracelets, Woodturning belt buckles, bolo ties, and a couple of unique necklaces. Even if you are not interested in jewelry making, I think most segmenters will find techniques that they can incorporate into other styles of work. “Twice Turned Bowl” Basics-Turning a bowl from 112 Alan Stirt Open Bowl Turning-Balancing the Grain Green wood-Drying and finishing-tools, techniques, safety-“Grain Balancing. Turning-Carving-Milk Painting Techniques-Tools 113 Alan Stirt Turning and Carving a Square Platter and sharpening-Finishing Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
DVD Turner DVD Title Synopsis Number Basic Bowl Turning and Bowl Gouge Use and 114 Phil Pratt Turned Bowl Fundementals Sharpening Basic and Intermediate Skills 115 John Jordan Bowl Turning with John Jordan Explanation of Tools, Lathes, Safety, Finishing 116 Phil Gold “Victor’s Bowls”-Instruction by Victor Peters Making the Victor Peters Stacked Lidded Bowl Pierced Hollow Form and Vase “VERY THIN” 117 Stuart Mortimer Wet Turning with a Difference Using the Skew, Spindle Gouge, Bowl Gouge and Hollowing Tool Three Women 118 Ditmer-Holzapfel-Scarpino Signatures in Turning Judy Ditmer, Michelle Holzapfel, Betty Scarpino Discuss Their Evolution in Turning A close look at Basic Concepts, Tools, and Skills 119 Soren Berger The Joy of Turning Wood for Creative woodturning John Jordan & Lyle 120 Hollow Turning Hollow Forms & Laser Guided Hollow System Jamieson 121 Chris Stott Natural Edges & Hollow Forms VHS CONVERSION-minor sound garble VHS CONVERSION-Tools & Sanding Techniques 122 Chris Stott Finishing for Woodturners of Available Finishes VHS CONVERSION-Sharpening Tecnniques 123 Chris Stott Cutting and Sharoening for Wooturners without Jigs Bowl Turning Techniques VHS CONVERSION- Tools-Sharpening-Techniques 124 Chris Stott Inlaid & Novelty Boxes plus Basic Offset Turning Inlay Materials Off Center Turning VHS CONVERSION-Step by Step-Selecting Wood-Tools to Use-outside Form-Hollowing 125 Trent Bosch Vessels of Illusion Techniquies-Carving-Turning and Bending an Insert VHS CONVERSION-Selecting Materials-Orienting the Grain-The Super Flute Gouge-Sharpening- 126 David Ellsworth Hollow Turning Sanding & Finishing-Hollowing the Bowl-Finishing the Bottowm-Polishing
Last Updated October 12, 2018
Central Florida Woodturners Club DVD Library
Last Updated October 12, 2018