DOCSLIB.ORG

First Release of the Selected Projects

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
First Release of the Selected Projects EFFECT projects’ database Creating effects through communication and engagement in Future and Emerging Technologies Deliverable 2.1: EFFECT projects’ database Authors: ZABALA Innovation Consulting (ZAB) 24/02/2017 This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 737301. EFFECT projects’ database Technical references Project Acronym EFFECT Project Title Creating effects through communication and engagement in Future and Emerging Technologies Project Coordinator Elisabeth Schmid youris.com (YOURIS) [email protected], [email protected] Project Duration January 2017 –December 2018 (24 months) Deliverable No. D2.1 Dissemination level* PU Work Package WP 2 - WP Content Provision Task T2.1 – Refine and harmonize the projects’ baseline relevant for FET and update factual information via desk research Lead beneficiary ZAB Contributing beneficiary/ies ZAB Due date of deliverable Month 2 - February 2017 Actual submission date 28 February 2017 PU = Public PP = Restricted to other programme participants (including the Commission Services) RE = Restricted to a group specified by the consortium (including the Commission Services) CO = Confidential, only for members of the consortium (including the Commission Services) v Date Beneficiary Author 1.0 24/02/2017 ZAB L. Martiarena 2.0 24/02/2017 ZAB A. Elosegui 3.0 28/02/2017 YOU E. Schmid, A. De Ferrari 2 EFFECT projects’ database Disclaimer This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 737301. The sole responsibility for the content of this report lies with the authors. It does not necessarily reflect the opinion of the European Union. The European Commission is not responsible for any use that may be made of the information contained therein. 3 EFFECT projects’ database Executive Summary EFFECT project is H2020 funded projects aiming to enhance visibility and impact of FET research in a wide diversity of actors (researchers, industry, policy makers, civil society organisations, citizens etc.) and to stimulate debate and collaboration among multiple stakeholders through dedicated community building and public engagement activities. This deliverable, called “EFFECT project’s database”, contains a database gathering all the factual information and contacts for the FP7 and H2020 FET projects that the EFFECT consortium will identify as relevant for communication. The starting point of this database is a pre-selection of 170 FET projects (130 of FP7 and 40 of H2020), which have been chosen for this screening, based on the following criteria: projects started between 2012 and 2014 and that finished or will finish between 2015 and 2018. This ensures that the contacted projects already have result to be communicated, but they are still a breakthrough. The methodology followed in the elaboration of the database included in this deliverable, is based on a desk research: the collection and processing of data available in the official websites of the projects and other public sources, such as European Commission’s CORDIS repository of projects. The main output of this activity is a database with information to contact the coordinators or participants of the FET projects that have been pre-selected, in order to identify results or outcomes that will be communicated, by different tools, to targeted stakeholders and the wide audience. 4 EFFECT projects’ database 1 Table of Content 1 Objectives ................................................................................................... 6 2 Database ..................................................................................................... 7 2.1 The screening and selection process ............................................................... 7 2.2 Database ................................................................................................ 7 5 EFFECT projects’ database 1 Objectives The final objective of this deliverable, elaborated as result of task 2.1, is the creation of a database containing basic information of FET projects approved both in FP7 and H2020. In the next stage, EFFECT team will contact these projects’ coordinators and/or key partners in order to gather direct and detailed information and select communicable results. This document is one of the deliverables of the Work Package 2 “Content provision”, which aims to define the editorial management strategy of FET projects’ contents, in order to unleash their communication and impact potential, stimulate debates and engagement and support the translation of the FET visionary thinking into concrete and more understandable scenarios. The main output of this Work Package is the selection of 30 results or stories that will be communicated to both a broader audience and targeted stakeholders. As part of the task 2.1, the EFFECT consortium has retrieved, analysed and elaborate facts, data, tools, information and highlights of FP7 and H2020 FET projects, to identify the FET key results having best potential attractiveness for communication to the media and key target groups approached by the project. The output of this task is a database containing all the factual information and contacts for the FP7 and H2020 FET projects that the consortium will identify as relevant for communication. This database will be continuously updated and broadened along the entire project lifetime. 6 EFFECT projects’ database 2 Database 2.1 The screening and selection process EFFECT has screened FP7 and H2020 FET themes: 170 projects out of a total of 252 funded FP7 projects and 117 H2020 projects. Some selection criteria have been applied in order to focus on achievements and impacts in different communication formats. A first selection criterion has been applied by excluding CSA projects. A second criterion includes the timing of execution of the projects, i.e. including FP7 projects that started between 2012 and 2014 and that finished or will finish between 2015 and 2018 and H2020 RIA projects that started in 2015 and that will finish between 2016 and 2018, for a total number of 170 projects to be screened. Projects Total Types of projects Selection Criteria projects Total to be screened funded FP7 projects 252 projects 47 CSA CSA excluded 130 R&I projects 202 collaborative projects FP7 projects started between 2012 - 2014 2 small or medium-scale focus research projects FP7 projects that finished or will finish between 2015 and 2018 H2020 projects 117 projects 16 CSA CSA excluded 40 RIA projects 2 FPA RIA projects that started in 2015 and 98 RIA that will finish between 2016 and 1 SGA-RIA 2018 Total 369 projects 170 projects Table 1: approved FET projects and first selection criteria During the screening process, EFFECT team has collected the information considered as useful by conducting a desk research: extracting information from both CORDIS and projects’ own websites. Based on this database, project coordinators or partners will be contacted in order to identify outputs and/or stories of these projects to be later communicated through a mix of communication formats and distribution channels. • Project 2.2 Database The following database contains factual information and contacts for the FP7 and H2020 FET projects: 130 of FP7 and 40 of H2020. Out of the 130 projects selected in FP7, 79 have already finished and 51 are expected to finish between May 2016 and the end of 2018. All the 40 projects selected in H2020 will finish in 2018. 7 EFFECT projects’ database These data has been used to produce a contact database, which will remain as an internal tool. This database includes the following data: • Project o Acronym o Title o Programme o Start date o End date o Budget o EC contribution o Contract (RIA/Collaborative project) o Topic o Website o Summary • Organization o Name o Country o City o Coordinator (Yes/no) o Contact person • Contact person (1) o Title o First name o Last name o Email o Phone 1 o Phone 2 o Area • Contact person (2) o Title o First name o Last name o Email o Phone 1 o Phone 2 o Area o Figure 1: EFFECT projects’ database – Project information 8 EFFECT projects’ database Figure 2: EFFECT projects’ database – organisation Figure 3: EFFECT projects’ database – Contact person Due to confidentiality reasons, non personal data are included in the public version of the data based attached in this deliverable. The personal data will be used only internally. The public database includes the following data: • Project o Acronym o Title o Programme o Start date o End date o Budget o EC contribution o Topic o Website o Summary o Coordinator o Country The internal tool includes FET projects coordinators and key partners personal data (as shown in figure 3), and they are going to be used only to contact them, as the objective of the collection of the personal data is to get to contact these people to select the stories. 9 EC Acronym Title Programme Start date End date Budget Contract Topic Website Summary Coordinator Country contribution We propose to engineer and validate a novel random access three‐dimensional two‐photon (2P) laser scanning microscope which can simultaneously image three different brain regions in the three spatial dimensions (3x3D system), where each scanned volume can exceed cubic millimeters. Our 3x3D system, which allows the Fast two‐photon in simultaneous recording of neuronal activity in multiple, functionally connected distant brain volumes, is essential vivo imaging and
Load more

Recommended publications
  • Graphene-Based Spintronic Components
    Graphene-Based Spintronic Components Minggang Zeng,†,‡ Lei Shen,∗,† Haibin Su,¶,§ Miao Zhou,† Chun Zhang,†,∥ and Yuanping Feng∗,† Department of Physics, 2 Science Drive 3, National University of Singapore, Singapore 117542, Singapore, NanoCore, 5A Engineering Drive 4, National University of Singapore, Singapore 117576, Singapore, Division of Materials Science, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore, Institute of High Performance Computing, 1 Fusionopolis Way, Connexis 138632, Singapore, and Department of Chemistry, 3 Science Drive 3, National University of Singapore, Singapore 117543, Singapore E-mail: [email protected] ; [email protected] Abstract A major challenge of spintronics is in generating, controlling and detecting spin-polarized current. Manipulation of spin-polarized current, in particular, is difficult. We demonstrate here, based on calculated transport properties of graphene nanoribbons, that nearly ±100 % spin-polarized current can be generated in zigzag graphene nanoribbons (ZGNRs) and tuned by a source-drain voltage in the bipolar spin diode, in addition to magnetic configurations of the electrodes. This unusual transport property is attributed to the intrinsic transmission selection rule of the spin subbands near the Fermi level in ZGNRs. The simultaneous control of spin current by the bias voltage and the magnetic configurations of the electrodes provides an opportunity to implement a whole range of spintronics devices. We propose theoretical designs for a complete set of basic spintronic devices, including bipolar spin diode, transistor and logic gates, based on ZGNRs. Graphical TOC Introduction Spintronics, a new type of electronics that seeks to exploit the spin degree of freedom of an electron in addition to its charge, offers one of the most promising solutions for future high operating speed and energy-saving electronic devices.1 The major challenge of spintronics is the difficulty in generating, controlling and detecting spin-polarized current.
    [Show full text]
  • Emerging Spintronics Phenomena and Applications
    Emerging spintronics phenomena and applications Rahul Mishra and Hyunsoo Yang * Department of Electrical and Computer Engineering, National University of Singapore, 117576, Singapore Development of future sensor, memory, and computing nanodevices based on novel physical concepts is one of the significant research endeavors in solid-state research. The field of spintronics is one such promising area of nanoelectronics which utilizes both the charge and spin of an electron for device operations. The advantage offered by spin systems is in their non-volatility and low- power functionality. This paper reviews emerging spintronic phenomena and the research advancements in diverse spin based applications. Spin devices and systems for logic, memories, emerging computing schemes, flexible electronics and terahertz emitters are discussed in this report. *[email protected] 1 I. Introduction Conventional sensor, memory, and computing electronics exploit the charge of an electron for their operations. However, along with charge, an electron is also characterized by its spin angular momentum or spin. It is the spin of an electron that manifests in the form of magnetism that we see in magnetic objects of the macro world. In the information technology age, magnetism has found industry applications in the massive digital data storage. The field of spintronics is centered on electron’s spin in conjunction with its charge. As we near the end of a several decade scaling of CMOS technologies due to fundamental physical limitations, utilizing the degree of spin freedom might be a natural choice for next generation technologies. An external energy source is not required for maintaining a particular spin- or magnetic-state in a spintronic device.
    [Show full text]
  • Valleytronics: Opportunities, Challenges, and Paths Forward
    REVIEW Valleytronics www.small-journal.com Valleytronics: Opportunities, Challenges, and Paths Forward Steven A. Vitale,* Daniel Nezich, Joseph O. Varghese, Philip Kim, Nuh Gedik, Pablo Jarillo-Herrero, Di Xiao, and Mordechai Rothschild The workshop gathered the leading A lack of inversion symmetry coupled with the presence of time-reversal researchers in the field to present their symmetry endows 2D transition metal dichalcogenides with individually latest work and to participate in honest and addressable valleys in momentum space at the K and K′ points in the first open discussion about the opportunities Brillouin zone. This valley addressability opens up the possibility of using the and challenges of developing applications of valleytronic technology. Three interactive momentum state of electrons, holes, or excitons as a completely new para- working sessions were held, which tackled digm in information processing. The opportunities and challenges associated difficult topics ranging from potential with manipulation of the valley degree of freedom for practical quantum and applications in information processing and classical information processing applications were analyzed during the 2017 optoelectronic devices to identifying the Workshop on Valleytronic Materials, Architectures, and Devices; this Review most important unresolved physics ques- presents the major findings of the workshop. tions. The primary product of the work- shop is this article that aims to inform the reader on potential benefits of valleytronic 1. Background devices, on the state-of-the-art in valleytronics research, and on the challenges to be overcome. We are hopeful this document The Valleytronics Materials, Architectures, and Devices Work- will also serve to focus future government-sponsored research shop, sponsored by the MIT Lincoln Laboratory Technology programs in fruitful directions.
    [Show full text]
  • Semiconductor Spintronics: Information Processing with Spin Currents
    Semiconductor Spintronics: Information Processing with Spin Currents Berend T. Jonker1, Olaf M.J. van ‘t Erve2, George Kioseoglou2, Aubrey T. Hanbicki, Connie H. Li, Michael Holub3, Chaffra Awo-Affouda3 and Phillip E. Thompson Naval Research Laboratory, Washington DC 20375, USA 1 Phone: 001-202-404-8015 E-Mail: [email protected] 2 George Washington University Research Associate 3 National Research Council Postdoctoral Associate 1. Introduction shows that the net spin polarization of the electrons in the Si The electronics industry to date has relied upon the at least 30% at low temperature. The spin injection process control of charge flow, and used size scaling to is therefore relatively efficient, given that the spin continuously increase the performance of existing polarization of the Fe is only 45%. electronics. However, size scaling cannot continue This interpretation is confirmed by similar indefinitely, and new approaches must be developed. measurements on Fe/Al2O3/Si/AlGaAs/GaAs/AlGaAs Basic research efforts have shown that spin angular quantum well structures, in which the spin polarized momentum, another fundamental property of the electron, electrons drift under applied field from the Si and recombine can be used to store and process information in solid state in the GaAs QW. In this case, the polarized EL can be devices. The International Technology Roadmap for analyzed using the familiar quantum selection rules, Semiconductors has identified the electron’s spin as a new yielding an electron spin polarization of 10%. state variable which should be explored for use beyond CMOS. Silicon’s mature technology base and overwhelming dominance make it an obvious choice for implementing spin-based functionality.
    [Show full text]
  • Arxiv:1907.03494V2 [Cond-Mat.Mes-Hall] 29 Oct 2019
    Single and bilayer graphene on the topological insulator Bi2Se3: Electronic and spin-orbit properties from first-principles Klaus Zollner1, ∗ and Jaroslav Fabian1 1Institute for Theoretical Physics, University of Regensburg, 93040 Regensburg, Germany (Dated: October 30, 2019) We present a detailed study of the electronic and spin-orbit properties of single and bilayer graphene in proximity to the topological insulator Bi2Se3. Our approach is based on first-principles calculations, combined with symmetry derived model Hamiltonians that capture the low-energy band properties. We consider single and bilayer graphene on 1{3 quintuple layers of Bi2Se3 and extract orbital and proximity induced spin-orbit coupling (SOC) parameters. We find that graphene gets significantly hole doped (350 meV), but the linear dispersion is preserved. The proximity induced SOC parameters are about 1 meV in magnitude, and are of valley-Zeeman type. The induced SOC depends weakly on the number of quintuple layers of Bi2Se3. We also study the effect of a transverse electric field, that is applied across heterostructures of single and bilayer graphene above 1 quintuple layer of Bi2Se3. Our results show that band offsets, as well as proximity induced SOC parameters can be tuned by the field. Most interesting is the case of bilayer graphene, in which the band gap, originating from the intrinsic dipole of the heterostructure, can be closed and reopened again, with inverted band character. The switching of the strong proximity SOC from the conduction to the valence band realizes a spin-orbit valve. Additionally, we find a giant increase of the proximity induced SOC of about 200%, when we decrease the interlayer distance between graphene and Bi2Se3 by only 10%.
    [Show full text]
  • Computing-In-Memory with Spintronics
    Computing-in-Memory with Spintronics Shubham Jain1, Sachin Sapatnekar2, Jian-Ping Wang2, Kaushik Roy1, Anand Raghunathan1 1School of Electrical and Computer Engineering, Purdue University 2Department of Electrical and Computer Engineering, University of Minnesota 1fjain130,kaushik,[email protected], 2fsachin,[email protected] Abstract—In-memory computing is a promising approach to different in-memory computing designs – STT-CiM [12], alleviating the processor-memory data transfer bottleneck in ROM-Embedded MRAM [13], and CRAM [10] that propose computing systems. While spintronics has attracted great interest modifications to the peripherals or the bit-cells of STT-MRAM as a non-volatile memory technology, recent work has shown that its unique properties can also enable in-memory computing. We to enable in-memory computing. We show that by leveraging summarize efforts in this direction, and describe three different the unique attributes of spintronic memories, these designs designs that enhance STT-MRAM to perform logic, arithmetic, perform computations (logic operations, scalar and vector and vector operations and evaluate transcendental functions arithmetic, and transcendental functions) within the memory within memory arrays. array. I. Introduction STT-CiM [12] is an example of in-memory computing Modern computing workloads such as data analytics, ma- with spintronic memory that proposes modifications to the chine learning, graphics, and bioinformatics operate on large peripherals while retaining the core bit-cell and array structure datasets, leading to frequent accesses to off-chip memory. of STT-MRAM intact. It exploits the resistive nature of spin- Consequently, a significant amount of time and energy is spent tronic memories to simultaneously enable multiple wordlines in the movement of data between the processor and memory, in an STT-MRAM array, leading to multiple bit-cells being causing a major bottleneck in computing systems.
    [Show full text]
  • Opportunities and Challenges for Spintronics in the Microelectronics Industry
    REVIEW ARTICLE https://doi.org/10.1038/s41928-020-0461-5 Opportunities and challenges for spintronics in the microelectronics industry B. Dieny 1 ✉ , I. L. Prejbeanu1, K. Garello 2, P. Gambardella 3, P. Freitas4,5, R. Lehndorff6, W. Raberg7, U. Ebels1, S. O. Demokritov8, J. Akerman9,10, A. Deac11, P. Pirro 12, C. Adelmann 2, A. Anane13, A. V. Chumak 12,14, A. Hirohata 15, S. Mangin 16, Sergio O. Valenzuela17,18, M. Cengiz Onbaşlı 19, M. d’Aquino 20, G. Prenat1, G. Finocchio 21, L. Lopez-Diaz22, R. Chantrell 23, O. Chubykalo-Fesenko 24 and P. Bortolotti13 ✉ Spintronic devices exploit the spin, as well as the charge, of electrons and could bring new capabilities to the microelectronics industry. However, in order for spintronic devices to meet the ever-increasing demands of the industry, innovation in terms of materials, processes and circuits are required. Here, we review recent developments in spintronics that could soon have an impact on the microelectronics and information technology industry. We highlight and explore four key areas: magnetic memories, magnetic sensors, radio-frequency and microwave devices, and logic and non-Boolean devices. We also discuss the challenges—at both the device and the system level—that need be addressed in order to integrate spintronic materials and functionalities into mainstream microelectronic platforms. onventional electronic devices are based on nonmagnetic spin-transfer torque14,15 (STT) and spin–orbit torque (SOT)16, of semiconductors and use the controlled flow of electric giant tunnelling magnetoresistance (TMR)17,18 in MgO-based MTJs charges to achieve information processing and communi- and of large interfacial magnetic anisotropy at magnetic metal/ C 19 cation.
    [Show full text]
  • Quantum Materials for Modern Magnetism & Spintronics (Q3MS)
    Physical Review Workshop on Quantum Materials for Modern Magnetism & Spintronics (Q3MS) July 11-14, Hefei, China (Onsite & Online Hybrid) Venue: Gaosu Hall C, 5F, Gaosu Kaiyuan International Hotel Program Day 1 -- July 12 Welcome & Opening Remarks Chair: Prof. Zhenyu Zhang (USTC) 8:30~8:50 Dr. Michael Thoennessen (Editor-In-Chief, APS) Prof. Xincheng Xie (Peking Univ & Associate Director, NSFC) Prof. Xiaodong Xu (Workshop Co-chair, Univ of Washington, USA) Fundamental Concepts and Enabling Materials Session I Chair: Prof. Xiangrong Wang (HKUST, Hong Kong SAR) Geometric Picture of Electronic Systems in Solids 8:50~9:25 Naoto Nagaosa (+1) (RIKEN & University of Tokyo, Japan) Thermopower and Thermoelectricity Enhanced by Spin Degrees of 9:25~10:00 Freedom in Dirac Materials Xianhui Chen (USTC, China) 10:00~10:25 Photo Time & Coffee Break 2D Quantum Magnets Session II Chair: Prof. Shiwei Wu (Fudan Univ) Stacking Dependent Magnetism in Van der Waals Magnets 10:25~11:00 Di Xiao (-12) (Carnegie Mellon University, USA) 2D Quantum Magnets and Its Heterostructures 11:00~11:35 Xiang Zhang (University of Hong Kong, Hong Kong SAR) Electrical Control of a Canted-antiferromagnetic Chern Insulator 11:35~12:10 Xiaodong Xu (-15) (University of Washington, USA) Topology and Technology Frontiers in Magnetics Session III Chair: Prof. Tai Min (Xi’an Jiaotong Univ) Emergent Electromagnetic Responses from Spin Helices, Skyrmions, and 14:00~14:35 Hedgehogs Yoshinori Tokura (+1) (RIKEN & University of Tokyo, Japan) Topological Spin Textures 14:35~15:10 Stuart Parkin (-6) (Max Planck Institute of Microstructure Physics, Germany) Spin Transport in Quantum Spin Systems 15:10~15:45 Eiji Saitoh (+1) (University of Tokyo, Japan) Electrical Manipulation of Skyrmionic Spin Textures in Chiral Magnets 15:45~16:20 Haifeng Du (The High Magnetic Field Laboratory, CAS, China) 16:20~16:40 Coffee Break Zoo of Hall Effects I Session IV Chair: Prof.
    [Show full text]
  • Graphene Spintronics
    Graphene Spintronics Wei Han1,2,3, Roland K. Kawakami4,5,†, Martin Gmitra6, and Jaroslav Fabian6†† 1International Center for Quantum Materials, School of Physics, Peking University, Beijing 100871, P. R. China 2Collaborative Innovation Center of Quantum Matter, Beijing 100871, P. R. China 3 IBM Almaden Research Center, San Jose, California 95120, USA 4 Department of Physics, The Ohio State University, Columbus, Ohio 43210, USA 5 Department of Physics and Astronomy, University of California, Riverside, California 92521, USA 6Institute for Theoretical Physics, University of Regensburg, D-93040 Regensburg, Germany † e-mail: [email protected] ††e-mail: [email protected] The isolation of graphene has triggered an avalanche of studies into the spin-dependent physical properties of this material, as well as graphene-based spintronic devices. Here we review the experimental and theoretical state-of-art concerning spin injection and transport, defect-induced magnetic moments, spin-orbit coupling and spin relaxation in graphene. Future research in graphene spintronics will need to address the development of applications such as spin transistors and spin logic devices, as well as exotic physical properties including topological states and proximity-induced phenomena in graphene and other 2D materials. 1 Spintronics aims to utilize the spin degree freedom of electrons for novel information storage and logic devices1. Recently, there has been great interest in spin logic devices2,3 for high speed, low power operation, and spin transistors4 for reconfigurable logic. For this purpose, a major challenge is developing a suitable spin transport channel with long spin lifetime and long distance spin propagation. Graphene, a single atomic layer of graphitic carbon, is a very promising spin channel material due to the achievement of room temperature spin transport with long spin diffusion lengths of several micrometers5-10.
    [Show full text]
  • Graphene and Graphene Nanomesh Spintronics
    Electronics 2013, 2, 368-386; doi:10.3390/electronics2040368 OPEN ACCESS electronics ISSN 2079-9292 www.mdpi.com/journal/electronics Review Graphene and Graphene Nanomesh Spintronics Junji Haruyama Faculty of Science and Engineering, Aoyama Gakuin University, 5-10-1 Fuchinobe, Sagamihara, Kanagawa 252-5258, Japan; E-Mail: [email protected]; Tel./Fax: +81-42-759-6256 Received: 11 September 2013; in revised form: 25 October 2013 / Accepted: 5 November 2013 / Published: 4 December 2013 Abstract: Spintronics, which manipulate spins but not electron charge, are highly valued as energy and thermal dissipationless systems. A variety of materials are challenging the realization of spintronic devices. Among those, graphene, a carbon mono-atomic layer, is very promising for efficient spin manipulation and the creation of a full spectrum of beyond-CMOS spin-based nano-devices. In the present article, the recent advancements in graphene spintronics are reviewed, introducing the observation of spin coherence and the spin Hall effect. Some research has reported the strong spin coherence of graphene. Avoiding undesirable influences from the substrate are crucial. Magnetism and spintronics arising from graphene edges are reviewed based on my previous results. In spite of carbon-based material with only sp2 bonds, the zigzag-type atomic structure of graphene edges theoretically produces spontaneous spin polarization of electrons due to mutual Coulomb interaction of extremely high electron density of states (edge states) localizing at the flat energy band. We fabricate honeycomb-like arrays of low-defect hexagonal nanopores (graphene nanomeshes; GNMs) on graphenes, which produce a large amount of zigzag pore edges, by using a nonlithographic method (nanoporous alumina templates) and critical temperature annealing under high vacuum and hydrogen atmosphere.
    [Show full text]
  • The Emerging Technology of Spintronics News Scan
    Indian Journal of Pure & Applied Ph ys ics V ol. 40, November 2002, pp. 835-836 News Scan The emerging technology of types of calcu lat ions . In quantum mechanics, an electron can be in both spin-up and spin -down spintronics states, at the same time. The mixed state coul d form Every appliance from electri c bulb to laptop th e base of a computer, built around not binary bits computer works on the principl e of transport of but the qu antum bits or qubit. It is any combinati on electri cal charge carri ers-electrons, whi ch cause of a I or a O. The simpl est device usin g spin­ dependent effect is a sand wich with two macrnetic electri c current to fl ow through wires. The electrons b have both charge and spin . The spin of th e electrons layers surrounding a non-magnetic metal or could greatly enhance th e p;1rticles' usefulness . The in su lator. If the two magneti c layers are different , se mi conductor techn ology is based on th e number th en th e magneti zation direction of one can be of charges and th eir energy . The electroni c dev ices rotated with respect to the other. This leads to the such as transistors wo rk due to fl ow of charge. The utili za ti on of these structures as sensor elements and cr for memory elements. Ph ys icists are now tryin g to electron can be ass umed as tin y rotatin b bar macrb net with two possibl e ori entations : spin- up or spin- use the property of th e electron-like spin rath er than charge to develop new generati on of mi croelectro ni c down.
    [Show full text]
  • Molecular Nanomagnets for Novel Spintronics Devices
    Molecular Nanomagnets for Novel Spintronics Devices by Sean Walker A thesis presented to the University of Waterloo in fulfilment of the thesis requirement for the degree of Master of Science in Chemistry - Quantum Information Waterloo, Ontario, Canada, 2016 © Sean Walker 2016 Author’s Declaration I hereby declare that I am the sole author of this thesis. This is a true copy of the thesis, including any required final revisions, as accepted by my examiners. I understand that my thesis may be made electronically available to the public. ii Abstract Molecular nanomagnets possess interesting quantum properties that make them po- tential candidates for qubits in quantum information processing. Heterometallic an- tiferromagnetic wheels specifically have been shown to have a coherence time long enough to permit quantum computing operations. The field of molecular spintronics deals with the integration of molecular nanomagnets into nanoelectronic devices for the purpose of probing and manipulating these quantum properties. In order for a nanomagnet to be incorporated into such a device it needs to be both magnetically and structurally stable when in contact with nanoelectronic components, and its coupling to the environment needs to be controlled. The first part of this thesis deals with the synthesis and characterization of a derivative of a member of the Cr7Ni family of heterometallic antiferromagnetic wheels. The synthetic process involved introducing long alkyl chains into the or- ganic shell of the nanomagnet in order that it may interact with carbon-based na- noelectronic devices in a non-destructive capacity. The molecule was characterized in order to confirm the results of the synthesis, to gain a greater understanding of how its magnetic properties can be modelled, and to fingerprint the system in order to acquire data that will help determine whether its properties remain intact when attached to a graphene surface.
    [Show full text]