DOCSLIB.ORG

Maverick Series 3 Series Adjustable Desks Community Tables | Maverick Conference Conference Storage Units |

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Maverick Series 3 Series Adjustable Desks Community Tables | Maverick Conference Conference Storage Units | Maverick Series maverick series Our signature Maverick Series combines classic all-laminate designs with the ability to mix and match two of our 20 standard colors to provide modern day durability for any office space. Storage Units | Adjustable Desks Conference | Community Tables For the latest information on products and updates visit: conference collection 4 3 maverick series 3 Days and DAYS Lead Time Maverick Series Product Specifications Colors • 20 standard colors are available on tops and chassis. Two colors may be specified at no charge. Top / Worksurfaces • 1” TFM (Thermally Fused Melamine) on industrial quality (45 lb.) particleboard. • 2 mm thermally-fused PVC edge banding. • Metal-to-metal connection fittings are installed for bridges and returns. • Woodgrain direction on tops of bridges and returns runs from user side to approach side to coordinate with main unit tops. Chassis Construction • TFM chassis fastened by screws, steel brackets, and/or concealed fasteners. 3 • ⁄4 pedestal is standard; double-wall pedestal housing construction. 3 • 1”-thick end panels on desks, returns, credenzas, and bookcases. ⁄4” thick end panels on hutches. 3 3 • ⁄4 height modesty panel on ⁄4 pedestal unit is standard; ½” modesty may be specified at no upcharge on bridges and returns, where specified. • Full-height modesty panel on returns or credenzas with lateral file or personal lateral file is standard. 3 3 1 5 • Modesty Panel Heights: ⁄4” modesty is 18 ⁄4”. ⁄2” modesty is 14” and full modesty is 27 ⁄8”. 3 • Bullet desks are standard with ⁄4 modesty panel and have 4” black metal posts. • The modesty inset on the approach side for 30”-deep tops is 6”; for 36”-deep tops, inset is 12”. • The modesty panel is flush to the approach edge on 20”-and 24”-deep tops. • Visible edges are edged with 2 mm thermally-fused PVC edge banding. • Adjustable leveling glides are provided on all units that are designed to be set on the floor. • Hutches for Maverick Series are designed to fit Maverick Series. Shipped with nail glides on legs - remove for installation. • Product heights are coordinated to facilitate matching, e.g., credenza plus hutch is 65” high. Optional 72” height is available, see page 38 for height upgrade. • Standard woodgrain direction on the modesty of pieces 60” wide or less is vertical. On pieces wider than 60”, the grain direction is horizontal. 3 • Lateral file and vertical file chassis are all ⁄4” material. Drawer Interiors • 9-ply Birch wood drawers Drawer Suspension, Construction and Doors • Box drawers have full-extension, progressive-action slides with precision steel ball bearings. • Heavy-duty file rods in file drawers. • Drawer fronts are inset to end panels except on storage units. • Recessed finger pulls is standard. Handles are an accessory option, see page 41. • Storage and file units only have MMH3B handles standard. • Overlay drawer front and doors are standard on all separate storage units and separate file units. Other furniture with storage and lateral file elements are inset to the end panels of chassis and overlay at the kneespace. • All file and lateral file drawers, file letter or legal side-to-side. • Each desk only is provided with one box drawer convenience tray. See page 42 for optional additional trays for other units. • File drawer construction accommodates hanging files not stacked material on drawer bottom. • Hutch doors overlay sides before inset to top with 19” clearance below. Cord Management 3 • A grommet is standard on computer corner elements and reception units; ⁄4” clearance at bottom of hutch backs. • Optional grommets are available - on page 40. Grommets are standard were shown on line drawings. Locks • Optional except on vertical and lateral files only; on the personal lateral file, the box drawers do not lock. • Optional locking on all pedestals, wall-mount cabinets, hinged-door storage units and hutches is available, see page 38 & 42. • Black or silver, removable cores are standard for all locks. • Pedestal key numbers are randomly assigned to all locking pedestals, except that double pedestal units will be keyed alike. • Key alike lock numbers (#101-115) may be specified at no additional charge. • Master keys and keyed-alike combinations are available. Note: Dimensions assigned in this price list are nominal. If exact measurements are required, the requirement must be specified in the order and specifically acknowledged by Maverick. Maverick reserves the right to change construction details and standards without notification, if necessary. Line drawings shown are a resemblance to finished product. Product designs may vary. Discounts are different between factories. 4 5 Maverick Series maverick series How to Order Maverick Series WORKSURFACE UNITS: DESK, CREDENZAS AND RETURNS 1. Product number: MM S 36 72 L Pedestal Location (From user’s view, Left or Right). If no pedestal involved, use L or R to indicate return location. Width Depth Product Type: Single Pedestal Desk (See page 11) Series Name: Maverick 2. Specify Worksurface Color. Matching color edge banding is standard. 3. Specify Drawer or Door Front Color (matching color edge band is standard). For two colors...Add $114 list. 4. Specify Chassis Color. Matching color edge banding is standard. Modesty color same as chassis is standard. 5.HANDLE Specify HandleOPTIONS: Options. H3B is standard on storage and lateral file units only, upgrade to H3S no charge. 6. Specify Other Accessories or Upgrades. See pages 38-44. HANDLE OPTIONS Crescent Black Crescent Silver Elliptical Black (MMH3B) (MMH3S) (MMH5B) Elliptical Silver Crescent Textured Nickel Flared Nickel (MMH5S) (MMH6) (MMH7) Bow Handle Curved Handle Bar Square Handle (MMH8) (MMH9) (MMH10B) Bar Square Handle Bar Square Handle Bar Handle (MMH10S) (MMH11) (MMH14) Curved Edge Handle (APH1) IMPORTANT NOTE: H3B handle is standard only on Maverick Series storage units and lateral files (except sliding door credenzas). See page 41 for prices. H3, H5-H10 and H14 are $32 each, H11, H30...$71 each. APH1...$64 each. 6 5 maverick series Maverick Series EDGE PROFILE SIDE VIEW 2 mm flat PVC edge banding on tops GROMMETS (OPTIONS/UPGRADE) Black grommet is standard where shown. Upgrade to silver color, N/C. GROMMET NOTE: While sitting at unit, grommet locations named from left to right. For grommet location on tops and/or modesty panel specify left, center or right. No grommets over pedestals. Left Right Left Right Left Center Right Desks Desks Credenza, Return, Bridges Center (Standard) Left Left CompuCredenza Bullets 6 7 Maverick Series maverick series Statement of Line DESKS Desk - single pedestal Desk - double pedestal Desk - shell Desk Fan Top - dbl. ped. Desk Fan Top - sgl. ped. Bullet Desk - standard Bullet Computer Desk (S) (D) (N) (FD) (FS) (BD) (BDC) Bullet Computer Desk Curved Desk - P-shape Comp. Desk - sgl. ped. Fan Top Comp. Desk - sgl. ped. Fan Top Comp. Desk - shell Fan Top Comp. Desk Curved - sgl. ped. Fan Top Comp. Desk Curved - shell (BDCQ) (PBD) (CD72 9)(Front Unit) (FCD72 9)(Front Unit) (FCDN72 9) (FCDQ72 9) (FCDNQ72 9) CREDENZAS å - sgl. ped. CompuCorner Curved - sgl. ped. CompuCorner - 31” lateral CompuCorner - 31” pers. lat. file CompuCorner - shell CompuCorner - curved shell Credenza - dbl. ped. & storage (CD) (CDQ) (CDLF) (CDPLF) (CDN) (CDNQ) (C_ _ _ _2) Credenza - dbl. ped. (kneespace) Credenza - sgl. ped. Credenza - lat. file Credenza - pers. lat. file Credenza - full storage Buffet Credenza Credenza - Storage File (C_ _ _ _3) (C_ _ _ _4) (C_ _ _ _5) (C_ _ _ _6) (C_ _ _ _1FP) (HDBC_ _ _ _) (C_ _ _ _9FP) RETURNS BRIDGES HUTCHES Return - 3/4 ped. Return - shell Return - lat. file Return - Pers. Lat. File Bridge Hutch - with doors Hutch - 2 door Hutch - no doors Hutch - bookcase (RA) (RN) (RLF) (RPLF) (BR) (H_ _WD) (H_ _W2D) (H_ _ND) (BCH) RISERS ADJUSTABLE DESKS RECEPTIONS Riser Riser return Riser L-Shape Adjustable desk Adjustable desk Adjustable desk Adjustable L-Shape desk Reception - “L” Reception - computer Reception - front (RB) (RBR) (RBL) (MMHADDC) (MMHAS) (MMHAN) (MMHALN) (RCAL) (RCDL) (RCAD) 8 7 maverick series Maverick Series Statement of Line BOOKCASES FILING Bookcase Bookcase - storage Bookcase - lateral Lateral File Lateral File - 3-drwr Lateral File - 4-drwr Lateral File - double Lateral File - personal Vertical File (BC) (BCD) (BCLF) (LF2) (LF3) (LF4) (LF_ _2+2) (PLF) (VF) STORAGE Cabinet - single Cabinet - double Cabinet - wardrobe Personal Storage Unit Side Door Storage Cabinet Side Door Storage Cabinet Cabinet -utility Cabinet - Wall Mount Cabinet - Wall Mount (STS) (ST) (WC) (WCP) (MMSDS) (MMSDF) (HDC) (CFOHD) (CFOHB) STANDS PEDESTALS Printer Stand Mobile - Box/file Mobile - box/box/file Mobile - file/file Mobile - Pencil/Box/file Mobile - Slim Pencil/Box/File (PS) (PEDAX) (PEDCX) (PEDDX) (PEDEX) (PEDSX) CONFERENCE Conference Table - boatshape Conference Table - rectangular Conference Table - racetrack Table - round Conference board Lectern Community Table Community Monitor Table (BS) (RE) (RT) (RD) (CB) (LEC) (NCT) (NCTATV) 8 Maverick Series maverick series Configurations - Are available for and DAYS 72 108 65 72 60 36 65 29 20 20 20 20 72 72 72 60 30 36 36 36 MM1 MM2 MM3 MM4 1 MMD3060 $1,192 1 MMD3672 $1,486 1 MMD3672 $1,486 1 MMD3672 $1,486 1 MMC2060 3 $1,177 1 MMC2072 3 $1,446 1 MMC2072 3 $1,446 1 MMC2072 3 $1,446 $2,369 $2,932 1 MMH72WD $1,418 1 MMH72WD $1,418 $4,350 1 MMLF202 $1,080 $5,430 144 65 29 29 29 20 72 66 60 72 66 78 72 36 MM5 MM6R MM7R MM8R 1 MMD3672 $1,486 1 MMS3060L $992 1 MMS3066L $1,114 1 MMS3672L $1,192 1 MMC2072 3 $1,446 1 MMRA2036R $821 1 MMRA2442R $970 1 MMRA2442R $970 1 MMH72WD $1,418 $1,813 $2,084 $2,162 1 MMLF202 $1,080 1 MMBCH $520 1 MMBC3665 $848 $6,798 65 29 29 29 72 72 72 66 60 60 72 72 MM9L MM10L MM11L MM12R 1 MMBD3060L $941 1 MMBD3672L $1,149 1 MMBD3672L $1,149 1 MMCD60 2L $1,177 1 MMRA2042L $837 1 MMRA2436L $936 1 MMRA2436L $936 1 MMRA2036R $821 $1,778 $2,085 1 MMH72WD $1,418 $1,998 $3,503 65 29 29 29 72 66 72 72 84 72 72 72 MM13R MM14R MM15R MM16R 1 MMCD66 4L $1,289 1 MMCD72 4L $1,230 1 MMCD72 4L $1,230 1 MMCD72 4L $1,230 1 MMRA2436R $936 1 MMRA2436R $936 1 MMRA2448R $987 1 MMRA2436R $936 $2,225 $2,166 $2,217 1 MMH72WD $1,418 $3,584 Use “R” or “L” to indicate the position of the return or bridge.
Load more

Recommended publications
  • Price List 2020 with Addendum1 January 1, 2020
    flexibility in furniture PRICE LIST 2020 WITH ADDENDUM1 JANUARY 1, 2020 UPHOLSTERED SEATING | MOLDED SEATING | WOOD SIDED SEATING | BEDROOM FURNITURE | WOOD, METAL & MOLDED CHAIRS & TABLES | WOOD SHELVING | CARRELS 800-221-6638 | MODUFORM.COM MODUFORM | TABLE OF CONTENTS A. General Information E. Tables & Carrels: Wood | Metal & Molded F. Lounge Seating: Molded | Wood Sided G. Seating | Fully Upholstered Terms & Conditions Wood Tables & Carrels Molded Bristol G6 Multiple Fabric | General Information Acton E3 520 ModuForm Lounge Seating F6 Bristol Flex Cover G7 General Information | COM 1150 E5 528 ModuForm Lounge Seating F7 Bounce G8 Multiple Fabric | Layouts 1160 E5 3000 ModuSeat Beam Seating F8 Burke Recliner G8 COM Data Sheet Groton E6 5000-250 ModuMaxx Lounge Seating F13 Chelsea G9 Custom Finish Data Sheet Mission E6 5000 ModuMaxx Beam Seating F14 Chelsea Flex Cover G9 Process Review 1100 E7 Chelsea Tables G10 Trestle E7 Wood Sided Lounge Chelsea Jr. G11 B. Molded Beds | Furniture Flip E8 RS | Rounder F17 Collegetown G12 Seclusion Bed B2 Utility E9 800 | ModuBlock F18 Collegetown Flex Cover G13 Secure Seclusion Bed B2 800 | ModuBlock Occasional E9 810 | ModuEsque F19 Collegetown Tight Seat G14 Moxie | Molded Bedroom B3 700 Heavy Duty Activity E10 MS | Mission F20 Dalton G15 SF | Marco F21 Emma G21 C. Casegoods & Bedroom Furniture Metal & Molded Tables MM | Marco Public Area Seating F22 Exeter G22 FIT C4 ModuMaxx X-Base Tables E13 ROC | Olive's Chair | Rocker F23 Forbes G23 Everest C8 ModuMaxx 4" Steel Leg Tables E14 350 | ModuRocker F24 Hadley G24 Roommate C15 ModuMaxx Cluster | 4 Attached Seats E15 Joanna G25 Lowell C25 ModuMaxx Cluster | 6 Attached Seats E16 Julia G26 Transitions C33 ModuMaxx Cluster | 8 Attached Seats E16 Kensington G33 Fortress C36 ModuMaxx Picnic Tables E17 Louis G34 Passages C39 ModuMaxx Folding Tables E17 Madison G35 Newman G36 Mattresses | Box Springs | Sets Peabody G37 Boxsprings | Foundations C46 Salem G38 Mattresses C46 Salem Flex Cover G39 University G40 D.
    [Show full text]
  • Herakles Iconography on Tyrrhenian Amphorae
    HERAKLES ICONOGRAPHY ON TYRRHENIAN AMPHORAE _____________________________________________ A Thesis presented to the Faculty of the Graduate School University of Missouri-Columbia _____________________________________________ In Partial Fulfillment Of the Requirements for the Degree Master of Arts ______________________________________________ by MEGAN LYNNE THOMSEN Dr. Susan Langdon, Thesis Supervisor DECEMBER 2005 ACKNOWLEDGEMENTS I would like to thank my thesis advisor, Dr. Susan Langdon, and the other members of my committee, Dr. Marcus Rautman and Dr. David Schenker, for their help during this process. Also, thanks must be given to my family and friends who were a constant support and listening ear this past year. ii TABLE OF CONTENTS ACKNOWLEDGEMENTS………………………………………………………………ii LIST OF ILLUSTRATIONS……………………………………………………………..v Chapter 1. TYRRHENIAN AMPHORAE—A BRIEF STUDY…..……………………....1 Early Studies Characteristics of Decoration on Tyrrhenian Amphorae Attribution Studies: Identifying Painters and Workshops Market Considerations Recent Scholarship The Present Study 2. HERAKLES ON TYRRHENIAN AMPHORAE………………………….…30 Herakles in Vase-Painting Herakles and the Amazons Herakles, Nessos and Deianeira Other Myths of Herakles Etruscan Imitators and Contemporary Vase-Painting 3. HERAKLES AND THE FUNERARY CONTEXT………………………..…48 Herakles in Etruria Etruscan Concepts of Death and the Underworld Etruscan Funerary Banquets and Games 4. CONCLUSION………………………………………………………………..67 iii APPENDIX: Herakles Myths on Tyrrhenian Amphorae……………………………...…72 BIBLIOGRAPHY………………………………………………………………………..77 ILLUSTRATIONS………………………………………………………………………82 iv LIST OF ILLUSTRATIONS Figure Page 1. Tyrrhenian Amphora by Guglielmi Painter. Bloomington, IUAM 73.6. Herakles fights Nessos (Side A), Four youths on horseback (Side B). Photos taken by Megan Thomsen 82 2. Tyrrhenian Amphora (Beazley #310039) by Fallow Deer Painter. Munich, Antikensammlungen 1428. Photo CVA, MUNICH, MUSEUM ANTIKER KLEINKUNST 7, PL. 322.3 83 3. Tyrrhenian Amphora (Beazley #310045) by Timiades Painter (name vase).
    [Show full text]
  • US EPA, Pesticide Product Label, RF2174 FLY BAIT STATION,01/22
    UNITED STATES ENVIRONMENTAL PROTECTION AGENCY WASHINGTON, DC 20460 OFFICE OF CHEMICAL SAFETY AND POLLUTION PREVENTION January 22, 2020 Martin Hoagland, Ph.D. Senior Regulatory Manager Wellmark International 1501 E. Woodfield Rd., Suite 200W Schaumburg, IL 60173 Subject: Label and CSF Amendment – Revision of Basic CSF and addition of Sublabel B for alternate packaging Product Name: RF2174 Fly Bait Station EPA Registration Number: 2724-839 Application Date: September 25, 2019 Decision Number: 556128/557876 Dear Dr. Hoagland: The amended label and CSF referred to above, submitted in connection with registration under the Federal Insecticide, Fungicide and Rodenticide Act, as amended, are acceptable. This approval does not affect any conditions that were previously imposed on this registration. You continue to be subject to existing conditions on your registration and any deadlines connected with them. A stamped copy of your labeling is enclosed for your records. This labeling supersedes all previously accepted labeling. You must submit one copy of the final printed labeling before you release the product for shipment with the new labeling. In accordance with 40 CFR 152.130(c), you may distribute or sell this product under the previously approved labeling for 18 months from the date of this letter. After 18 months, you may only distribute or sell this product if it bears this new revised labeling or subsequently approved labeling. “To distribute or sell” is defined under FIFRA section 2(gg) and its implementing regulation at 40 CFR 152.3. Please note that the record for this product currently contains the following CSF(s): • Basic CSF dated 01/18/2019 Should you wish to add/retain a reference to the company’s website on your label, then please be aware that the website becomes labeling under the Federal Insecticide Fungicide and Rodenticide Act and is subject to review by the Agency.
    [Show full text]
  • Ecfr — Code of Federal Regulations
    eCFR — Code of Federal Regulations About GPO | Newsroom/Media | Congressional Relations | Inspector General | Careers | Contact | askGPO | Help Home | Customers | Vendors | Libraries FDsys: GPO's Federal Digital System About FDsys ELECTRONIC CODE OF FEDERAL REGULATIONS Search Government Publications Browse Government Publications View past updates to the e-CFR. Click here to learn more. e-CFR Navigation Aids e-CFR data is current as of November 3, 2015 • Browse • Simple Search Title 29 → Subtitle B → Chapter XVII → Part 1910 → Subpart Z → §1910.1200 • Advanced Search * Boolean Browse Previous | Browse Next * Proximity Title 29: Labor • Search History PART 1910—OCCUPATIONAL SAFETY AND HEALTH STANDARDS (CONTINUED) Subpart Z—Toxic and Hazardous Substances • Search Tips • Corrections • Latest Updates §1910.1200 Hazard communication. • User Info (a) Purpose. (1) The purpose of this section is to ensure that the hazards of all chemicals produced or imported are • FAQs classified, and that information concerning the classified hazards is transmitted to employers and employees. The • Agency List requirements of this section are intended to be consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Revision 3. The transmittal of information is to be • Incorporation By Reference accomplished by means of comprehensive hazard communication programs, which are to include container labeling and other forms of warning, safety data sheets and employee training. Related Resources (2) This occupational safety and health standard is intended to address comprehensively the issue of classifying the The Code of Federal Regulations potential hazards of chemicals, and communicating information concerning hazards and appropriate protective (CFR) annual edition is the measures to employees, and to preempt any legislative or regulatory enactments of a state, or political subdivision of a codification of the general and state, pertaining to this subject.
    [Show full text]
  • PRICE LIST 2020V.Ms STATE of MISSISSIPPI APRIL 15, 2020
    flexibility in furniture PRICE LIST 2020v.ms STATE OF MISSISSIPPI APRIL 15, 2020 UPHOLSTERED SEATING | MOLDED SEATING | WOOD SIDED SEATING | BEDROOM FURNITURE | WOOD, METAL & MOLDED CHAIRS & TABLES | WOOD SHELVING | CARRELS 800-221-6638 | MODUFORM.COM TERMS AND CONDITIONS MODU FORM. INC. TERMS AND CONDITIONS By placing an order for furniture, material or other products (“products” or "goods"), Buyer agrees to these terms and conditions which shall prevail over inconsistent provisions in any other form or document of Buyer. PRICES: When quantity price discounts are quoted by Seller, such discounts are computed separately for each type of product to be sold and are based upon the quantity of each type and each size ordered at any one time for immediate delivery. If any order is reduced or canceled by Buyer with Seller's consent, it is agreed that prices will be adjusted upward to the higher prices, if applicable, for the uncanceled quantity. All prices in a catalog are list and FOB origin. Possession of this catalog or price list does not constitute an offer to sell. Pricing in a catalog or price list is for standard delivery. Standard delivery does not include truck unloading, removal of packaging, non-dock delivery, inside delivery, limited access delivery, residential delivery, lift gate, multiple drops on-site per shipment, multiple shipments per order (that could be accommodated by one delivery), uncrating or installation. Special requests for delivery should be made at the time of ordering. TAXES : Unless otherwise specified in the quotation, the prices shown do not include any taxes, import or export duties, tariffs, or custom charges.
    [Show full text]
  • Hazard Communication. Chemicals Which They Produce Or Im- (A) Purpose
    Occupational Safety and Health Admin., Labor § 1910.1200 of a currently effective determination chemicals in the workplace, as well as by the Assistant Secretary of Labor of containers of chemicals being that such program is compatible with shipped to other workplaces; prepara- the requirements of this section. Such tion and distribution of safety data determinations currently are in effect sheets to employees and downstream only in the States of Alabama, Arkan- employers; and development and imple- sas, California, Kansas, Kentucky, mentation of employee training pro- Florida, Mississippi, New Hampshire, grams regarding hazards of chemicals New York, North Carolina, Texas, Ten- and protective measures. Under section nessee, Oregon, Idaho, Arizona, Colo- 18 of the Act, no state or political sub- rado, Louisiana, Nebraska, Wash- division of a state may adopt or en- ington, Maryland, North Dakota, force any requirement relating to the South Carolina, and Georgia. issue addressed by this Federal stand- [39 FR 23502, June 27, 1974, as amended at 43 ard, except pursuant to a Federally-ap- FR 49746, Oct. 24, 1978; 43 FR 51759, Nov. 7, proved state plan. 1978; 49 FR 18295, Apr. 30, 1984; 58 FR 35309, (b) Scope and application. (1) This sec- June 30, 1993. Redesignated at 61 FR 31430, June 20, 1996] tion requires chemical manufacturers or importers to classify the hazards of § 1910.1200 Hazard communication. chemicals which they produce or im- (a) Purpose. (1) The purpose of this port, and all employers to provide in- section is to ensure that the hazards of formation to their employees about the all chemicals produced or imported are hazardous chemicals to which they are classified, and that information con- exposed, by means of a hazard commu- cerning the classified hazards is trans- nication program, labels and other mitted to employers and employees.
    [Show full text]
  • Insulated-Systainer®
    systainer® A brilliant idea with a wide range of advantages Safely packed, clearly organised and quickly transported. Stackable and linkable Systematic design down to the very last detail Quality: 100% ABS, sturdy and impact- resistant, dust and splashwater-proof The systainer® will convince you in no time in everyday use! T-Loc One-hand operation Opening when linked Lock Open Connect Classic Line Innovative labelling Additional front handle Compatibility Fields of application Hospital Laboratory Medical Technology Anaesthesia Dental Emergency Medicine Pharmaceutical Veterinary Medicine Possibilities of use Hospital Laboratory Medical Technology Anaesthesia Dental Emergency Medicine Pharmaceutical Veterinary Medicine Insulated-systainer® The Insulated-systainer® are especially suitable for the safe dispatch of diagnostic samples of the material class UN 3373, fully correspond the packing regulation P 650 and were tested and approved by the BAM in Berlin (Federal Institute for Materials Research and Testing). Our Neopor and EPP inlays are equipped with a groove on 1 4 both sides to optionally attach dividers. Thus cooling packs can be inserted without having to touch neither the sample nor the cooling pack. Advantages of the referring inlay: In contrast to common styrofoam inserts the Neopor inlay has far better insulation properties. In addition it offers more stability for only a small difference in price. 2 5 The EPP inlay is characterized by its extreme sturdiness. It can be easily cleaned in industrial dish washers. 36 7 1 Insulated-systainer®
    [Show full text]
  • Master's Thesis
    MASTER'S THESIS Virtual Packaging of Parts Development of a E-course and Packing Logistics Siar Cicek 2015 Master of Science in Engineering Technology Mechanical Engineering Luleå University of Technology Department of Engineering Sciences and Mathematics Acknowledgement First of all I want to thank my family and friends who supported me through this whole project, I want also thank my supervisor Torbjörn Ilar at Luleå University of Technology without your teaching in different courses this project would been very difficult to do. I want also thank my supervisors at Scania: Lars Hanson, Franz Achieng Waker, Peter Lööv and Pär Mårtensson without yours expertise this projects wouldn’t be possible. I want to also thank all packing engineers that have given me tremendous amount of knowledge: Carl Malmgren, Mats Ahrin, Tom Varis, Jan Larsson, Benny Quist, and Ingemar Pihlblad. I want also thank the E-course developers at Scania: Carolina Munoz Jara, Marwan Alper and Matilda Rogstedt without your help it would be difficult to make an E-course. Last I want to thank everyone at the department Global Industrial Development for the support and advises. Södertälje, 2015-11-27. Siar Cicek Abstract This thesis is about educating the packing engineers at Scania to their best potential. The education is made by developing an E-course adapted specially for the packing engineers at Scania. Content of the E-course was defined through analysis of literature, science articles and interviews with the packing engineers it was also decided from analysis. Reason why the packing engineers needed this education is because the packing engineers decisions has a big impact on the company.
    [Show full text]
  • Bio-Based and Biodegradable Plastics – Facts and Figures Focus on Food Packaging in the Netherlands
    Bio-based and biodegradable plastics – Facts and Figures Focus on food packaging in the Netherlands Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Rapport nr. 1722 Bio-based and biodegradable plastics - Facts and Figures Focus on food packaging in the Netherlands Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Report 1722 Colophon Title Bio-based and biodegradable plastics - Facts and Figures Author(s) Martien van den Oever, Karin Molenveld, Maarten van der Zee, Harriëtte Bos Number Wageningen Food & Biobased Research number 1722 ISBN-number 978-94-6343-121-7 DOI http://dx.doi.org/10.18174/408350 Date of publication April 2017 Version Concept Confidentiality No/yes+date of expiration OPD code OPD code Approved by Christiaan Bolck Review Intern Name reviewer Christaan Bolck Sponsor RVO.nl + Dutch Ministry of Economic Affairs Client RVO.nl + Dutch Ministry of Economic Affairs Wageningen Food & Biobased Research P.O. Box 17 NL-6700 AA Wageningen Tel: +31 (0)317 480 084 E-mail: [email protected] Internet: www.wur.nl/foodandbiobased-research © Wageningen Food & Biobased Research, institute within the legal entity Stichting Wageningen Research All rights reserved. No part of this publication may be reproduced, stored in a retrieval system of any nature, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publisher. The publisher does not accept any liability for inaccuracies in this report. 2 © Wageningen Food & Biobased Research, institute within the legal entity Stichting Wageningen Research Preface For over 25 years Wageningen Food & Biobased Research (WFBR) is involved in research and development of bio-based materials and products.
    [Show full text]
  • OSHA Compliance Guidance for Funeral Homes Occupational Safety and Health Administration (OSHA) Compliance Summary
    OSHA Compliance Guidance for Funeral Homes Occupational Safety and Health Administration (OSHA) Compliance Summary Introduction and injuries on federal OSHA reporting forms 200 and 101, although some OSHA-approved state plans may In 1970, Congress passed the Occupational Safety and require this practice. Funeral homes are required to Health Act “...to assure so far as possible every working report within 48 hours to their local or regional OSHA man and woman in the nation safe and healthful office any employment accident which results in death working conditions and to preserve our human of an employee or the hospitalization of five or more resources.” employees. In general, coverage of the Act extends to all employers and their employees in the 50 states, the District of Columbia, Puerto Rico and all other territories under Documentation Checklist federal government jurisdiction. Coverage is provided Formaldehyde Program Includes: either directly by the federal Occupational Safety and Health Administration (OSHA) or through an OSHA- • Chemical Information List approved state program. • Training Program Verification The 23 states and two territories (shown later) have • Hazard Determination Program OSHA-approved safety and health plans which apply to • Hazard Communication Program private sector employers. These plans are required to be • Training Program Procedure/Content at least as effective as federal standards. States are given • Personal Protective Equipment Handout(s) six months to develop plans comparable to new federal mandates. If you are conducting business in one of • Workplace Testing Procedures/Policies/Results these states, it is advisable to contact your local OSHA • Safe Handling and Usage Policies for Formaldehyde office to determine if additional compliance measures • Formaldehyde Waste Disposition Programs/Policies are required.
    [Show full text]
  • Ch 6 Corrosion Resistant Enclosures
    “When the inspector came by, Hoffman’s Watershed™ Enclosures helped us pass the first time. Our washdowns are now much more thorough.” Corrosion-Resistant Enclosures ▲ Revolutionary enclosure solutions that ensure Index reliable performance in extreme conditions. Aluminum Clamp Cover Type 4X NFAL Junction Boxes 6.106 Whether on an oil rig in the middle of the Atlantic or in a COMLINE® Wall-Mount Enclosures 6.108 high-pressure, scalding washdown in a food processing facility, COMPACT® Type 4X Enclosures 6.100 isolating critical controls from harsh environments is a job no Continuous Hinge CHAL Junction Boxes 6.104 one performs better than Hoffman. Not only does Hoffman Continuous Hinge Type 4X Enclosures 6.112 offer the broadest range of corrosion-resistant enclosures, but Fiberglass, Polycarbonate, ABS we also invest more in design, testing, and product support. Fiberglass Hinged Cover Type 4X Enclosures 6.118 One example is our innovative Watershed™ line—we started Fiberglass Single-Door Free-Standing Type 4X Enclosures 6.140 with a clean sheet of paper to reinvent enclosures for Fiberglass Two-Door Free-Standing Type 4X Enclosures 6.142 washdown and developed the only enclosures certified by Fiberglass Type 4X Enclosures for Flange-Mounted NSF. It’s no wonder Hoffman enclosures are trusted in the Disconnects 6.136 world’s most demanding environments. Fiberglass Type 4X Overlapping Door Enclosures 6.122 Fiberglass Type 4X Small Enclosures 6.114 Fiberglass Type 4X Wall-Mount Enclosures 6.132 Fiberglass ULTRX® Type 4X Enclosures 6.126 QLINE® D Polycarbonate and ABS Type 4X and Hoffman Watershed™ Type 6 Enclosures 6.148 ® ™ QLINE D Polycarbonate Type 4X Pushbutton Enclosures 6.146 Hoffman Watershed Enclosures, our ® new line of stainless steel free- QLINE E Polycarbonate and ABS Type 4X and standing and wall-mount enclosures, Type 6 Enclosures 6.154 are designed to facilitate complete QLINE® I Polycarbonate and ABS Type 4X Enclosures 6.160 washdown while protecting sensitive Stainless Steel electrical controls.
    [Show full text]
  • Compliance Tools
    HazCom 30 CFR Part 47 Telling Miners About Chemi cal Hazards ♦ U.S. Depart ment of Labor Mine Safety and Health Admin is tra tion Other Training Mate rial OT 49 July 2002 ~ ffi~te fill CORROSIVE MATERIALS EYEWASH ~ GASOLINE FOUNTAIN ft _____, TOXIC VAPORS Visit our web site at http://www.msha.gov HazCom 30 CFR Part 47 Telling Miners About Chemi cal Hazards U. S. Depart ment of Labor Elaine L. Chao Sec re tary Mine Safety and Health Admin is tra tion Dave D. Lauriski As sis tant Secre tary Other Training Mate rial OT 49 July 2002 HazCom Tool Kit Welcome to the Hazard Communication (HazCom) Tool Kit. This package is designed to help you develop an effective, mine-specific HazCom program that meets the provisions of Part 47. This package is divided into eight sections. These sections contain information you can copy or customize to meet your needs. You may want to put this material in a three-ring binder. Let’s take a brief look at each section. Introduction - Brief review of the rule with important dates to remember Hazard Determination HazCom Program Labeling Material Safety Data Sheets (MSDSs) HazCom Training Contacts for HazCom Assistance HazCom Rule 1 HazCom HELP IS AS CLOSE AS… Your Telephone MSHA District & Field Offices State Grants Program (See Section on HazCom Assistance) EFS Eastern U.S. Toll Free 1-800-678-6746 EFS Western U.S. Toll Free 1-800-579-2647 Your Computer Information available on the internet: www.msha.gov Your Local Field Office MSHA inspection and educational field services staff will be distributing compliance assistance materials to your site.
    [Show full text]